Categories
Harvest Right Scientific Freeze Dryers - Large
Harvest Right Scientific Freeze Dryers - Large Please Note: This product may hold a 11 week Lead Time Harvest Right’s lyophilizer/freeze dryer is the perfect addition to any laboratory. The scientific freeze dryer can be completely customized with your preferred processes. You can have multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. What's Included: Key Features & Benefits Convenience of 5-tray dryer in a table top unit.Large capacity — capable of freeze drying as much as a 3.5 to 4.0 gallons of material. Full-color, touch-screen display. 6-liter ice condensing capacity. Operation allows for recipe customization (up to 10 Thermal Treatment and 12 Drying steps). Control of the rate of freeze. This means that the rate of freeze can be speeded up or slowed down. Control of the ultimate final freeze temperature. Control of the amount of time a material is held at the ultimate freeze temperature before the drying cycle is started. Control of the shelf temperature during the dry cycle. This includes setting as many as five different shelf temperatures, thus allowing the material to dry in phases, at different temperatures. For instance, you might have the material begin drying at 10ºF and increase the temperature in phases until the ultimate final dry temperature is 70ºF. The shelf heaters can be set to automatically control the rate of sublimation during the primary drying cycle. Through this process, the unit has control of the attendant vacuum pressure. The system records and maintains a log of the pressure and temperature during all parts of the freeze-dry cycle. Provides ongoing, real-time display of pressure and temperature. The unit can also connect to and communicate the freeze dryer cycle data to a nearby PC through an ethernet cable. Profiles Create multiple, manageable profiles, with the ability to power on and off the condensing unit and vacuum pump in conjunction with ascending, controlled temperature and time settings. Manual or Automatic Controls The set point temperature can be programmed to any degree, and the ramp rate, at which the heaters rise, can be changed at any time. Also stores batch parameters and actual data. Network Connections With an ethernet cable, view freeze dry data through a cell phone, tablet, computer, or any device with access to a VNC Viewer. Data for each batch is maintained by the unit and can be accessed through a USB. User Accounts Can provide privacy with distinct user names and passwords, and can store up to 120 different recipes. Large Capacity Table top unit with 4-5 trays, large interior capacity, and freeze drys up to 4 gallons of material per batch. Programmable Processor The patented Smart Sensor controls temperature data recordings and manual and automatic operations. Technical Specifications Item Freeze Dryer/Lyophilizer Style Bench/Table Top Holding Capacity 6 Liters of Sublimated Ice Min. Temp. Rating Collector Cools to -46ºF Collector Material Stainless Steel Drying Chamber Included (Stainless Steel) Purge Valve Included Voltage 115 AMPS AC20 Dimensions 32.5″ high x 25.5″ deep x 22.5″ wide Exterior Stainless Steel or Powder Coated Aluminum Electronics Includes a Full Color Touch Screen (4.3″ diagonal) Operation Manual / Automated Vacuum Pump 7 CFM Oil-Free Scroll Vacuum Pump
$9,000.00
Harvest Right Scientific Freeze Dryers - Medium
Harvest Right Scientific Freeze Dryers - Medium Please Note: This product may hold a 5-8 week Lead Time Harvest Right’s lyophilizer/freeze dryer is the perfect addition to any laboratory. The scientific freeze dryer can be completely customized with your preferred processes. You can have multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. What's Included: Commercial Grade Oil-Free Vacuum Pump Four (4) Stainless Steel Trays Owner’s Manual Power Cord (110 Volt) Insulator Door Pad Details: Key Features & Benefits Convenience of 4-tray dryer in a table top unit.Large capacity — capable of freeze drying as much as a gallon or two of material (6 to 10 lbs when wet). Full-color, touch-screen display. 4-liter ice condensing capacity. Operation allows for recipe customization (up to 10 Thermal Treatment and 12 Drying steps). Control of the rate of freeze. This means that the rate of freeze can be speeded up or slowed down. Control of the ultimate final freeze temperature. Control of the amount of time a material is held at the ultimate freeze temperature before the drying cycle is started. Control of the shelf temperature during the dry cycle. This includes setting as many as five different shelf temperatures, thus allowing the material to dry in phases, at different temperatures. For instance, you might have the material begin drying at 10ºF and increase the temperature in phases until the ultimate final dry temperature is 70ºF. The shelf heaters can be set to automatically control the rate of sublimation during the primary drying cycle. Through this process, the unit has control of the attendant vacuum pressure. The system records and maintains a log of the pressure and temperature during all parts of the freeze-dry cycle. Provides ongoing, real-time display of pressure and temperature. The unit can also connect to and communicate the freeze dryer cycle data to a nearby PC through an ethernet cable. Profiles Create multiple, manageable profiles, with the ability to power on and off the condensing unit and vacuum pump in conjunction with ascending, controlled temperature and time settings. Manual or Automatic Controls The set point temperature can be programmed to any degree, and the ramp rate, at which the heaters rise, can be changed at any time. Also stores batch parameters and actual data. Network Connections With an ethernet cable, view freeze dry data through a cell phone, tablet, computer, or any device with access to a VNC Viewer. Data for each batch is maintained by the unit and can be accessed through a USB. User Accounts Can provide privacy with distinct user names and passwords, and can store up to 120 different recipes. Large Capacity Table top unit with 4-5 trays, large interior capacity, and freeze dries up to 4 gallons of material per batch. Programmable Processor The patented Smart Sensor controls temperature data recordings and manual and automatic operations. Technical Specifications Item Freeze Dryer/Lyophilizer Style Bench/Table Top Holding Capacity 4 Liters of Sublimated Ice Min. Temp. Rating Collector Cools to -46ºF Collector Material Stainless Steel Drying Chamber Included (Stainless Steel) Purge Valve Included Voltage 115 AMPS AC20 Dimensions 30″ high x 25″ deep x 20″ wide Exterior Stainless Steel or Powder Coated Aluminum Electronics Includes a Full Color Touch Screen (4.3″ diagonal) Operation Manual / Automated Vacuum Pump 7 CFM Oil-Free Scroll Vacuum Pump
$6,500.00
Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump
Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details Explosion Proof Motor 110-120V/208-240V 60Hz 1 Phase The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits: Runs 10°C cooler than comparable pumps. Slows corrosion. Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals. Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection. Suitable applications include freeze drying, degassing, vacuum ovens and concentrators. 3046E-01 comes with an explosion proof motor. Conduit wiring installation required. No cord, plug, or switch provided. Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr. Specifications Application CRVpro4 Free Air Displacement @ 60 Hz, cfm (L/min) 2.8 (78) Free Air Displacement @ 50 Hz, m³/hr (L/min) 4 (67) Ultimate Pressure, torr (mbar) 5x10⁻⁴ (4x10⁻⁴) Noise Level, dBA 50 Motor Speed, RPM, @60Hz, @50Hz 1740 (1450) Motor Power, HP (kW) 0.4 (0.5) Oil Capacity, mL 1150 Connection Flanges NW 16 Inlet Hose Connection* 5/8" to 3/4" Weight, lbs (kg) 46.3 (21) Dimensions, LxWxH, in (mm) 18.2x6.1x9.1 (463x157x230)
$4,670.00
Huber Ministat with Pilot ONE
Huber Ministat with Pilot ONE (Please Note: There is a 2 week lead time) Huber Ministats are the smallest cooling circulator in the world. Their small dimensions allow Ministats to be placed in the smallest of spaces, for example in a laboratory fume cupboard or inside technical plant. Despite their minimal size the systems are extensively fitted out and offer sufficient performance for temperature control of photometers, refractometers, viscometers, distillation apparatus, reaction vessels and mini-plants. The main applications are using external applications however the bath opening allows objects to be thermoregulated directly in a thermostat bath. A powerful pressure/suction pump with an infinitely controlled rotational speed ensures optimal circulation. The maximum pressure can also be regulated by an optional pressure sensor, meaning that sensitive glass reactors and apparatus can reliably be protected from breakage. Pilot ONE controller with Plug & Play technology Precise temperature control 5.7“ touchscreen and comfortable menu navigation Overtemperature and low level protection Safety class III/FL (DIN 12876) Powerful pressure/suction pump Programmer with calendar and clock functions 2-point calibration Download Ministat 125 Data Sheet Download Ministat 125w Data Sheet Download Ministat 230 Data Sheet Download Ministat 230w Data Sheet Download Ministat 240 Data Sheet Download Ministat 240w Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Huber Ministat 125 Huber Ministat 125w Huber Ministat 230 Huber Ministat 230w Huber Ministat 240 Huber Ministat 240w Temperature range -25...150 °C -25...150 °C -40...200 °C -40...200 °C -45...200 °C -45...200 °C Temperature stability ±0.02 °C ±0.02 °C ±0.05 °C ±0.02 °C ±0.02 °C ±0.02 °C Temperature Control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Safety class III / FL III / FL III / FL III / FL III / FL III / FL Protection class IP20 IP20 IP20 IP20 IP20 IP20 Dimensions (W x D x H) 8.86 x 14.57 x 16.89 in 8.86 x 14.57 x 16.89 in 10.04 x 17.72 x 18.74 in 10.04 x 17.72 x 18.74 in 11.81 x 18.31 x 20.31 inches 11.81 x 18.31 x 20.31 inches Weight 55.12 pounds 55.12 pounds 81.59 pounds 86 pounds 97.02 pounds 97.02 pounds Heating / Cooling Capacity Heating capacity 1 kW 1 kW 1,6 - 2,1 kW 1,5 kW 1,6 kW 1,6 kW Cooling capacity 100 20 0 -10 -20 °C0,3 0,3 0,21 0,15 0,05 kW 100 20 0 -10 -20 °C0.3 0,3 0,2 0,15 0,1 kW 100 20 0 -10 -20 -40 °C0,42 0,42 0,38 0,33 0,25 0,05 kW 100 20 0 -10 -20 -40 °C0,42 0,42 0,38 0,33 0,25 0,05 kW 100 20 0 -10 -20 -40 °C0,6 0,6 0,55 0,42 0,35 0,05 kW 100 20 0 -10 -20 -40 °C0,6 0,6 0,55 0,42 0,35 0,05 kW Cooling machine air-cooled water-cooled air-cooled water-cooled air-cooled water-cooled Refrigerant R290 (A3, H220) (0,066 kg) R290 (A3, H220) (0,06 kg) R290 (A3, H220) (0,099 kg) R290 (A3, H220) (0,06 kg) R290 (A3, H220) (0,099 kg) R290 (0,06 kg) Circulation Pump Pressure pump max. 22 lpm ; 0.7 bar 5.81 gpm ; 101.5 psi 22 lpm ; 0.7 bar5.81 gpm ; 101.5 psi 22 lpm ; 0.7 bar | 5.81 gpm ; 10.15 psi 22 lpm ; 0.7 bar | 5.81 gpm ; 10.15 psi 22 lpm ; 0.7 bar | 5.81 gpm ; 10.15 psi 22 lpm ; 0.7 bar5.81 gpm ; 101.5 psi Suction pump max. 16 lpm ; 0.4 bar4.23 gpm ; 58 psi 16 lpm ; 0.4 bar4.23 gpm ; 58 psi 16 lpm ; 0.4 bar4.23 gpm ; 58 psi 16 lpm ; 0.4 bar | 4.23 gpm ; 5.8 psi 16 lpm ; 0.4 bar | 4.23 gpm ; 5.8 psi 16 lpm ; 0.4 bar4.23 gpm ; 58 psi Pump connection M16x1 AG male M16x1 AG male M16x1 AG male M16x1 AG male M16x1 AG male M16x1 AG male Permissible viscosity 50 mm²/s 50 mm²/s 50 mm²/s 50 mm²/s 50 mm²/s 50 mm²/s Connections Digital interface Pt100 Pt100 Pt100 Pt100 Pt100 Pt100 Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Operating Data Permissible ambient temp. 5...35 °C 5...40 °C 5 to 40 °C 5 to 40 °C 5 to 40 °C 5 to 40 °C Noise level - - 59 dB(A) - - Bath opening W x D / BD 178 x 80 / 120 mm | 7.01 x 3.15 / 4.72 inches 178 x 80 / 120 mm | 7.01 x 3.15 / 4.72 inches 170 x 85 / 135 mm | 6.69 x 3.35 / 5.31 inches 170 x 85 / 135 mm | 6.69 x 3.35 / 5.31 inches 205 x 85 / 157 mm | 8.07 x 3.35 / 6.18 inches 205 x 85 / 157 mm | 8.07 x 3.35 / 6.18 inches Bath volume 2.75 Liters | 0.73 gal 2.75 Liters | 0.73 gal 3.2 Liters | 0.85 gal 3.2 Liters | 0.85 gal 4.9 Liters | 1.29 gal 4.9 Liters | 1.29 gal Filling volume min 2 Liters | 0.53 gal 2 Liters | 0.53 gal 2.8 Liters | 0.74 gal 2.8 Liters | 0.74 gal 4.5 Liters | 1.19 gal 4.5 Liters | 1.19 gal Cooling water connection - G1/2 AG - G1/2 AG - G1/2 AG Cooling water differential pressure min. - 2 bar | 29 psi - 2 bar | 29 psi - 2 bar | 29 psi Cooling water pressure max. - 6 bar | 87 psi - 6 bar | 87 psi - 6 bar | 87 psi Power supply 110-120V 1~ 60Hz 110-120V 1~ 60Hz 208-240V 1~/2~ 50/60Hz 110-120V 1~ 60Hz 208V 2~ 60Hz 208V 2~ 60Hz Current max. 11,5 A 11,5 A 14 A 14 A 10,5 A - Fusing 16 A 16 A 16 A 16 A 2x16 A -
$10,400.00 - $13,850.00
Huber Minichiller 600w OLÉ
Huber Minichiller 600w OLÉ Description: The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are available as both air and water cooled models and use natural refrigerants. The new OLÉ controller combines state-of-the-art technology with simple operation. OLÉ models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge). Environmentally-friendly, economic cooling solution High efficiency Precise temperature control Simple operation with menu navigation Robust stainless construction Reliable continuously operation with warning functions Easy to fill and empty Illuminated filling level indicator Bright, large OLED display USB and RS232 interfaces Natural refrigerant General Information & Temperature Controller Temperature range -20...40 °C Temperature stability ±0.5 °C Temperature Display OLED Display Display resolution 0.1 °C Alarm message optical, acoustical Controller OLÉ Safety class I / NFL Protection class IP20 Dimensions (W x D x H) 280 x 490 x 424 mm | 11.02 x 19.29 x 16.69 inches Weight 36 kg | 79.38 pounds Heating / Cooling Capacity Cooling capacity 15 0 -10 -20 ° C0,6 0,5 0,35 0,15 kW Cooling machine water-cooled Refrigerant R290 (A3, H220) (0,085 kg) Circulation Pump Pressure pump max. 24 lpm ; 0.7 bar | 6.34 gpm ; 10.15 psi Suction pump max. 18 lpm ; 0.4 bar | 4.76 gpm ; 5.8 psi Pump connection M16x1 AG male Connections Digital interface USB, RS232 Operating Data Old sku 3006.0127.98 Filling Volume min 2.8 Liters | 0.74 gal Volume of expansion 2.2 Liters | 0.58 gal Cooling water connection G1/2 AG Cooling water consumption 24 l/h Cooling water differential pressure min. 3 bar | 43.5 psi Cooling water pressure max. 6 bar | 87 psi Power supply 110-120V 1~ 60Hz Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C. Please observe the notes on installation and/or the space requirements of our products. The following voltage and frequency tolerances apply based on EN60034-1:Voltage +/- 5% for a frequency tolerance at the same time of +/- 2% Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency. This equipment is compliant to US-SNAP and all applicable EU laws. The US-SNAP end-use for this equipment is the industrial process refrigeration. Certification by a Notified Body upon request. We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.
$7,490.00 - $7,990.00
Huber Unichiller 500Tw
Huber Unichiller 500Tw (Please Note: There is a 2 -3 weeks lead time) Description: Huber Unichillers offer better efficiency, stable pressure and delivery performance with a constant cooling water temperature compared to traditional tap water cooling. Chillers also reduce water consumption and help conserve the environment whilst lowering operating costs. Unichillers are suitable for the removal of heat from chemical processes, cooling technical plants or as a central cooling water supply for laboratories. All Unichillers are designed for continual operation at ambient temperatures up to +40°C. Installation in an outside areas is possible with optional weather protection and winter operation packages. Pumps are available with an extended pressure and flow rate for applications with a high pressure drops. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favorites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Environmentally-friendly, economic cooling solution High efficiency Precise temperature control Powerful circulation pump Intelligent energy management Reliable continuously operation with warning functions Pilot ONE controller with 5.7" touchscreen Digital filling level indicator 2 x USB (Host and Device), Ethernet and RS232 interfaces Heater options available Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products General information & temperature controller Temperature range -20...40 °C Temperature stability ±0.5 °C Controller Pilot ONE (E-grade "Basic") Safety class I / NFL Protection class IP20 Dimensions (W x D x H) 1000 x 1100 x 1635 mm | 39.37 x 43.31 x 64.37 inches Weight -- kg | pounds Heating / cooling capacity Cooling capacity 15 0 -10 -20 °C_______________ 50 30 24 14 kW Cooling machine water-cooled Refrigerant (ASHRAE, GHS) R449A (A1, H280) Circulation pump Pressure pump max. 234 lpm ; 4.9 bar | 61.82 gpm ; 71.05 psi Pump connection G1 1/4 AG male Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating data Old Sku 3030.0003.01 Permissible ambient temp. 5...40 °C Filling volume min. 12.7 Liters | 3.36 gal Volume of expansion 7 Liters | 1.85 gal Cooling water connection G1 1/4 AG Cooling water differential pressure min. 1,5 bar | 217.5 psi Cooling water pressure max. 6 bar | 87 psi Power supply 460V 3~ 60Hz
$149,200.00 - $149,700.00
Huber Unichill 300T
Huber Unichiller 300T (Please Note: There is a 2 -3 weeks lead time) Description: Huber Unichillers offer better efficiency, stable pressure and delivery performance with a constant cooling water temperature compared to traditional tap water cooling. Chillers also reduce water consumption and help conserve the environment whilst lowering operating costs. Unichillers are suitable for the removal of heat from chemical processes, cooling technical plants or as a central cooling water supply for laboratories. All Unichillers are designed for continual operation at ambient temperatures up to +40°C. Installation in an outside areas is possible with optional weather protection and winter operation packages. Pumps are available with an extended pressure and flow rate for applications with a high pressure drops. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favorites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Environmentally-friendly, economic cooling solution High efficiency Precise temperature control Powerful circulation pump Intelligent energy management Reliable continuously operation with warning functions Pilot ONE controller with 5.7" touchscreen Digital filling level indicator 2 x USB (Host and Device), Ethernet and RS232 interfaces Heater options available Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General information & temperature controller Temperature range -20...40 °C Temperature stability ±0.5 °C Controller Pilot ONE (E-grade "Basic") Safety class I / NFL Protection class IP20 Dimensions (W x D x H) 905 x 2172 x 1900 mm | 35.63 x 85.51 x 74.8 inches Weight -- kg | pounds Heating / cooling capacity Cooling capacity 15 0 -10 -20 °C ____________ 30 18 11 6 kW Cooling machine air-cooled Refrigerant (ASHRAE, GHS) R449A (A1, H280) Circulation pump Pressure pump max. 210 lpm ; 4.7 bar | 55.48 gpm ; 68.15 psi Pump connection G1 1/4 AG male Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating data Old Sku 3020.0027.01 Permissible ambient temp. 5...40 °C Filling volume min. 14 Liters | 3.7 gal Volume of expansion 39 Liters | 10.3 gal Power supply 460V 3~ 60Hz
$128,600.00 - $129,100.00
Polyscience 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled
Polyscience 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled Description: 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled Display: LED Connectivity: Optional: RS232, RS485 Working Temperature Range °C: 5° to 35° Temperature Stability °C: ±0.5° Temperature Calibration Capability: 1-point Pump Type: Positive Displacement Key Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available Common Specifications Working Temperature Range °F 41° to 95° Working Temperature Range °C 5° to 35° Reservoir Capacity (gallons) 3.5 Reservoir Capacity (liters) 13.25 Reservoir/Tank Material Polyethylene Reservoir Cover Screw-on Cap Cleanable Air Filter Yes Cleanable Fluid Filter Yes Temperature Stability °F ±0.9° Temperature Stability °C ±0.5° Display LED Display Resolution (Read) 0.1 Pump Type Positive Displacement Process Connections 1/2" (F) NPT Over-Temperature Protection / Failsafe Heater Control Yes Reservoir Liquid Level Indicator Yes Reservoir Drain Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 30.5 x 19 x 26 in Overall Dimensions (L x W x H) (cm) 78 x 48 x 66 cm Compressor Size (HP) 1.5 Refrigerant R134a Shipping Weight (pounds) 340.0 Shipping Weight (kilograms) 154.0 Catalog Page Number 104 Hz (Hertz) 60 Hz Only 50 Hz Only Part Number 6860P46A270D 6850P46A270E Maximum Pressure (psi) 100.0 83.0 Maximum Pressure (bar) 6.90 5.72 Maximum Pressure Flow Rate (gpm) 3.50 2.90 Maximum Pressure Flow Rate (l/min) 13.2 11.0 Cooling Capacity @ +10°C (W) 4420 3715 Cooling Capacity @ +20°C (W) 5200 4371 Cooling Capacity @ +30°C (W) 5980 5027 Heater Wattage 1000 1000 Electrical Requirements (VAC/Hz/Ph/A) 230/60/1/21.1 240/50/1/20.8 Regulatory Approvals TUV CSA, CUL, CE
$10,243.00
Welch CRVpro Direct Drive Rotary Vane Vacuum Pump CRVpro6
Welch CRVpro Direct Drive Rotary Vane Vacuum Pump CRVpro6 ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits: Runs 10°C cooler than comparable pumps. Slows corrosion. Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals. Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection. Suitable applications include freeze drying, degassing, vacuum ovens and concentrators. 3061-01 is wired for North American 115V, 60Hz operation. Includes North American line cord, vacuum inlet hose barb suitable for gum rubber hose from 5/8" to 3/4" ID, and a charge of oil. 3062-01 is wired for North American 230V, 60Hz operation. Includes 230V North American line cord, UK cord, and skuko cord, and a charge of oil. Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr.
$3,713.00
Welch WOB-L System 2511
Welch WOB-L System 2511 ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details Use this easy system to collect waste into 1.2 Liter autoclaveable collection receiver. Includes vacuum measurement and regulation. Reservoirs are protected from overflow by float valve; inlet line hydrophobic filter further protects pump. Vacuum Pump is reliable WOB-L piston pump, perfect for aqueous vapors, buffer, and mild bleach solutions . Not for use with organic solvents / acids / bases. Model Number 2511 Applications Solution aspiration / collection; vacuum filtra Type Laboratory Vacuum Pump Free Air Displacement cfm (l/min.) @60Hz 0.39(11) Free Air Displacement m3/hr (l/min.) @50Hz 0.55(9.2) Ultimate Pressure 219(292) Maximum Vacuum 21.3 Max Pressure PSIG (pascal) 33(3.3 x 105) Motor Horsepower (watts) 1/30(25) Tubing Needed 3/16(5) Intake Thread NPT 3/16 in. Hose Overall Dimensions LxWxH in. (cm) 7.6x4.5x7.5 (19.4x11.4x19.1) Ship Weight 11.0(5) Shipping Dimensions LxWxH in. (cm) 11" x 7" x 7" (39x31x32)
$941.00
Julabo FL7006
Julabo FL7006 The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Key Benefits: Ergonomic design and easy operation Splash-proof keypad Large, bright LED display Reliable Microprocessor PID temperature control Filling level indicator Powerful immersion pumps, suitable for continuous operation Permissible temperature in return line +80°C Easy filling from the top with hinged protective lid Low liquid level protection with optical and audible alarm signal Integrated stainless steel bath tanks Removable venting grid for cleaning of the condenser Front drain No side vents RS232 interface for PC-connection IP class according to IEC 60529: 21 Alarm output, potential-free change-over contact (max. 30 VA) Pressure Indicator By-pass valve to adjust pump pressure Specifications Order No. 9666070 Model Series FL Series Working Temperature Range (°C) -20° to +40° Temperature Stability (°C) ±0.05 Temperature Control PID temperature control Display Resolution 0.01 °C Temperature Display LED Cooling Capacity °C 20 0 -10 -20 kW 7 5.1 3 1.55 Pump capacity Flow Rate (l/min) 60 Pump Capacity Flow Pressure (psi) 7.25...87.0 Pump Connections G1 1/4-inch Filling Volume Liters 39...47 Barbed fittings diameter (inner dia. / mm) 1-inch Refrigerant R404A Digital Interface RS232, Optional Profibus Ambient Temperature 5…40 °C Noise Level (dBA) 74 Classification Classification III (FL)according to DIN 12876-1 Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G1 1/4"male) Cooling of Compressor Air Power requirement V / Hz / A 3x 230/60/23 Cooling capacity °C 7kW (@ 20°C), 6.4kW (@ 10°C), 5.1kW (@ 0°C), 3kW (@ -10°C), 1.55kW (@ -20°C) Alarm Signal acoustically & optical Temperature Selection / Display °C Volumetric Capacity Liters 39...47 Outer dimensions W x L x H inch 30.7 x 33.5 x 58.3 Available Voltage Versions 230 V / 3 Ph. / 60 Hz, 400 V / 3Ph. / 50 Hz Other Characteristics Removable venting grid for convenient cleaning to maintain cooling performance. Internal pump by-pass valve to regulate pressure Characteristics / Display Easy to read: Large LED temperature display for actual value and setpoint(resolution 0.1 °C) Characteristics / Operation Simple and fast : Convenient 3-key setpoint adjustment (FLmodels) Characteristics / Temperature Control Precise: PID Temperature control with set control parameters, temperature stability ±0.02…±0.2 °C Characteristics / Refrigeration Technology Consistent cooling capacity: Easily removable venting gridfor quick and easy cleaning Characteristics / Technical Features Serial connection: RS232 interface for PC connection, e.g. data communication and recording of measured values
$24,502.04 - $27,384.08
Julabo FL300
Julabo FL300 The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Specifications Order No. 9660003 Model Series FL Series Category Recirculating Coolers Working Temperature Range (°C) -20 ... +40 Temperature Stability (°C) ±0.05 Display Resolution 0.01 °C Temperature Display LED Cooling capacity (Medium Ethanol) °C 20 0 -10 -20kW 0.3 0.2 0.15 0.1 Pump capacity Flow Rate (l/min) 15 Pump Capacity Flow Pressure (psi) 5.08 Pump Connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling Volume Liters 3 ... 4.5 Refrigerant stage 1 R134a Filling volume refrigerant stage 1 (g) 133 Global Warming Potential for 1430 Carbon dioxide equivalent stage 1 (t) 0.19 Digital Interface RS232, Optional Profibus Ambient Temperature 5...40 °C Dimensions W x L x H (inch) 9.8 x 19.7 x 23.6 Weight (LBS) 86 Noise Level (dBA) 55 Description Suitable fluids: water, water-glycol mixture, JULABO Thermal bath fluids Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G3/4" male) Cooling of Compressor Air Available Voltage Versions -115V/60HZ -230V/50HZ-230V/60HZ Product Data Sheet Manual
$6,604.44
Julabo PRESTO A85
Julabo PRESTO A85 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Key Benefits: For highly precise, external temperature applications Rapid heating and cooling Fast compensation of exothermic reaction Wide working temperature ranges without changing fluids Highest performance with small footprint Space-saving design optimizes space utilization in your lab NEW 5,7 industrial color TFT touch screen well-organized view of important information with unmatched, intuitive user friendliness Up to 3 user level with password management NEW USB (Host und Device) NEW Ethernet NEW SD-Card slot RS232 / optional RS485 / optional Profibus DP Stand-by input Filling system accessible from the top Removable venting grid for simplified removal of dust Specs-At-A-Glance Temperature Stability (°C) ±0.05 … ±0.1 Cooling Capacity °C 200 20 0 -20 -40 -60 -80 kW 2.8 2.5 2.4 2.4 2.4 2.2 0.4 Heating Capacity (kW) 6 @ 400V, 6 @ 230V, 5.5 @ 208V Heating or Cooling Capability Both Working Temp Range (°C) -85 … +250 Pump Capacity Flow Rate (l/min) 35 … 76 Pump Capacity Flow Pressure (psi) 6.96 … 46.42 @ 400V, 6.96 … 46.42 @ 230V, 6.96 … 43.51 @ 208V Filling Volume Liters 9.5 (7 internal expansion) Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Noise Level (dBA) 69 Power requirement V / Hz / A 3x 208/60/30 Cooling of Compressor 2-stage Air External Devices External Temp Probe, Remote Control Dimensions W x L x H (in) 24.1 x 42.6 x 49.3 Fluid Type Silicone, Fluorinert/Galden, Other Weight (lbs) 805 Product Data Sheet
$78,625.36 - $80,825.90
Julabo PRESTO A80
Julabo PRESTO A80 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Key Benefits: For highly precise, external temperature applications Rapid heating and cooling Fast compensation of exothermic reaction Wide working temperature ranges without changing fluids Highest performance with small footprint Space-saving design optimizes space utilization in your lab NEW 5,7 industrial color TFT touch screen well-organized view of important information with unmatched, intuitive user friendliness Up to 3 user level with password management NEW USB (Host und Device) NEW Ethernet NEW SD-Card slot RS232 / optional RS485 / optional Profibus DP Stand-by input Filling system accessible from the top Removable venting grid for simplified removal of dust Specs-At-A-Glance Cooling Capacity °C 200 100 0 -20 -40 -60 -80 kW 1.2 1.1 1.2 1.1 1.1 0.65 0.1 Heating Capacity (kW) 10 @ 208V, 12 @ 230V, 12 @ 400V Heating or Cooling Capability Both Working Temp Range (°C) -45 … +250 Pump Capacity Flow Rate (l/min) 35 … 76 Pump Capacity Flow Pressure (psi) 6.74 … 43.5 @ 208V, 6.74 … 46.4 @ 230V, 6.74 … 46.4 @ 400V Filling Volume Liters 3.9 (1.7 internal expansion) Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Noise Level (dBA) 68 Power requirement V / Hz / A 208/60/15 Cooling of Compressor 2-stage Air External Devices External Temp Probe, Remote Control Dimensions W x L x H (in) 20.9 x 26.2 x 49.6 Fluid Type Silicone, Fluorinert/Galden, Other Weight (lbs) 463 Product Data Sheet
$46,291.24 - $47,989.82
Julabo PRESTO A45T
Julabo PRESTO A45T Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Specs-At-A-Glance Cooling Capacity °C 200 20 0 -10 -20 -30 -40 kW 3.4 3.5 3.3 2.6 1.8 1 0.3 Heating Capacity (kW) 5.5 @ 208V, 6 @ 230V, 6 @ 400V Heating or Cooling Capability Both Working Temp Range (°C) -45 … +250 Pump Capacity Flow Rate (l/min) 35 … 76 Pump Capacity Flow Pressure (psi) 6.74 … 43.5 @ 208V, 6.74 … 46.4 @ 230V, 6.74 … 46.4 @ 400V External Devices External Temp Probe, Remote Control Dimensions W x L x H (in) 20.9 x 26.2 x 49.6 Fluid Type Silicone, Fluorinert/Galden, Other Weight (lbs) 463
$50,709.24 - $52,534.72
Julabo PRESTO A45
Julabo PRESTO A45 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Key Benefits: For highly precise, external temperature applications Rapid heating and cooling Fast compensation of exothermic reaction Wide working temperature ranges without changing fluids Highest performance with small footprint Space-saving design optimizes space utilization in your lab NEW 5,7 industrial color TFT touch screen well-organized view of important information with unmatched, intuitive user friendliness Up to 3 user level with password management NEW USB (Host und Device) NEW Ethernet NEW SD-Card slot RS232 / optional RS485 / optional Profibus DP Stand-by input Filling system accessible from the top Removable venting grid for simplified removal of dust Specifications Shipping Weight 251 lbs Shipping Dimensions 40 x 24 x 40 in Order No. 9420452 Model Series PRESTO Working Temperature Range (°C) -45°...+250° Temperature Stability (°C) ±0.05 … ±0.1 Temperature Control ICC intelligent cascade control, TCF temperature controlfeatures, Absolute temperature calibration 1-point Display Resolution 0.01 °C Integrated Programmer 8 x 60 steps Temperature Display TFT Touchscreen Heating Capacity (kW) 2.3 Cooling Capacity Pump capacity Flow Rate (l/min) 35...76 Pump Capacity Flow Pressure (psi) 6.74 … 43.5 @ 208V, 6.74 Pump Connections M30x1.5 Filling Volume Liters 7.5 (7.5 internal expansion) Refrigerant R507 External Pt100 integrated Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Ambient Temperature 5…40 °C Noise Level (dBA) 69 Classification Classification III (FL)according to DIN 12876-1 Analog Connection Input / Output Optional Cooling of Compressor 1-stage Air Filling Volume Expansion Vessel Liters 7.5 Power requirement V / Hz / A 3x 208/60/23 Alarm Signal acoustically & optical Temperature Selection / Display °C / °F Outer dimensions W x L x H inch 20.9 x 26.2 x 49.6 Product Data Sheet
$47,025.38 - $48,849.92
Julabo PRESTO A40
Julabo PRESTO A40 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Specifications Shipping Weight 231 lbs Shipping Dimensions 40 x 24 x 40 in Order No. 9420401 Model Series PRESTO Working Temperature Range (°C) -40° to +250° Temperature Stability (°C) ±0.01 … ±0.05 Temperature Control ICC intelligent cascade control, TCF temperature controlfeatures, Absolute temperature calibration 1-point Display Resolution 0.01 °C Integrated Programmer 8 x 60 steps Temperature Display TFT Touchscreen Heating Capacity (kW) 2.3 Cooling Capacity °C 200 100 20 0 -20 -30 -40kW 1.2 1.2 1.2 0.9 0.6 0.3 0.1 Pump capacity Flow Rate (l/min) 16 to 40 Pump Capacity Flow Pressure (psi) 1.45 to 18.85 Pump Connections M24x1.5 Filling Volume Liters 3.5 (1.7 Internal Expansion) Refrigerant R507 External Pt100 integrated Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Ambient Temperature 5…40 °C Noise Level (dBA) 55 Classification Classification III (FL)according to DIN 12876-1 Analog Connection Input / Output Optional Cooling of Compressor 1-stage Air Filling Volume Expansion Vessel Liters 2.7 Power requirement V / Hz / A 208/60/15 Alarm Signal acoustically & optical Temperature Selection / Display °C / °F Outer dimensions W x L x H inch 12.7 x 22.9 x 26 Other Characteristics GB version with 1800 W heater Characteristics / Display State-of-the-art display technology: TFT Display for comfortable user guidance, colored display of
$27,788.28 - $29,447.38
Julabo PRESTO A30
Julabo PRESTO A30 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Specifications Shipping Weight 185 lbs Shipping Dimensions 32 x 24 x 40 in Order No. 9420300 Model Series PRESTO Working Temperature Range (°C) -30° … +250° Temperature Stability (°C) ±0.01 … ±0.05 Temperature Control ICC intelligent cascade control, TCF temperature control features, Absolute temperature calibration 1-point Display Resolution 0.01 °C Integrated Programmer 8×60 steps Temperature Display TFT Touchscreen Heating Capacity (kW) 2.3 Cooling Capacity °C 200 100 20 0 -10 -20 -30kW 0.5 0.5 0.5 0.4 0.3 0.2 0.05 Pump capacity Flow Rate (l/min) 25 Pump Capacity Flow Pressure (psi) 7.25 Pump Connections M24x1.5 Filling Volume Liters 2.4 (1.5 internal expansion) Refrigerant R507 External Pt100 integrated Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Ambient Temperature 5…40 °C Noise Level (dBA) 54 Classification Classification III (FL)according to DIN 12876-1 Analog Connection Input / Output Optional Cooling of Compressor 1-stage Air Filling Volume Expansion Vessel Liters 1.5 Power requirement V / Hz / A 208/60/14 Heaters 2.1kW @ 200V (2.7kW @ 230V) Alarm Signal acoustically & optical Temperature Selection / Display °C / °F Outer dimensions W x L x H inch 9.5×9.5×24 Available Voltage Versions 230V/50Hz 208V/60Hz 208V/60Hz (Canadian and US NRTL Certified) Other Characteristics GB version with 2100 W heater capacity / CH version with 1700 W heater capacity Characteristics / Display State-of-the-art display technology: TFT Display for comfortable user guidance, colored display of measurement values, graphs and control options, user-defined views Characteristics / Operation Convenience for several users: Administrator level for customizing instrument settings, user levels with limited permissions for fast and safe defined access, password protection, all levels adjusta, Instructions inside: Help menus and explanations in plain text for all control options, help messages and warning messages, Multilingual user guidance: Language selection for display of control options, notifications and warning messages via touchscreen, Optimal ease of use: Touch screen for direct operation via display Characteristics / Temperature Control For perfect results: Intelligent Cascade Control, automatic & self optimizing adjustment of PID control parameters, temperature stability ±0.01 °C … Characteristics / Refrigeration Technology 100 % Cooling capacity: Active Cooling Control for cooling available throughout the entire working temperature range, fast cool-down even at higher temperatures, Consistent cooling capacity: Easily removable venting grid for quick and easy cleaning, Energy saving cooling: Proportional cooling control for automatic adjustment of cooling power or temporary switch-off of compressor as needed to save up to 90 % energy in comparison to unregulated c
$19,926.12 - $21,537.28
True Terpenes Goji OG
True Terpenes Goji OG Fragrance: Spicy Herbal Sweet Licorice Effects: Uplifting Happy Hungry Euphoric Goji OG has a unique fruity aroma. It will not only have soothing effects, but will give an uplifted, energetic focus. This sweet, red berry, licorice scented strain is a cross of Snow Lotus and Nepali OG, creating a upper-dominant hybrid. Storage Requirements: Keep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. Dilution: Terpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier: The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With Care: Can cause skin irritation, do not use PRIOR to dilution. Goji OG-Specific Certificates: Product Specification Certificate of Analysis Safety Data Sheet Food Safety Company-Specific Certificates: ISO 9001:2015 GMP Certification FSSC 22000
$121.50 - $2,250.00
Welch DUOSEAL Two Stage - Refrigeration 1402B-46
Welch DUOSEAL Two Stage - Refrigeration ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details: 115V, 60Hz, 1 Ph with N.Amer, 115V Plug Deep vacuum for fast evacuation and dehydration Durable pump, precision machined Gas ballast for high vapor loads. Rugged DuoSeal belt-drive vacuum pumps enable fast, thorough evacuation of refrigeration systems. Features high flow and deep vacuum with low pump RPM and large oil reservoirs for extended life and reduced maintenance. Includes handles for enable positioning. Specifications: Model Number 1402B-46 Applications Service Lithium Bromide absorption chillers to 500 -700 tons, fluorcarbon or ammonia chillers to 100 to 200 tons Type DUOSEAL Two Stage - Refrigeration Free Air Displacement m3/hr (l/min.) @50Hz 5.6 Ultimate Pressure 160 Maximum Vacuum 1 x 10-4 (1.3 x 10-4) Oil Capacity 525 Motor Horsepower (watts) 2.25 Adjustable Vac. / Gas Ballast Yes Tubing Needed 13/16" ID Hose or 3/4" Flare Fitting Intake Thread NPT 1-20 ISO Exhaust / Intake Flange 1-20 Overall Dimensions LxWxH in. 20" x 12" x 15" Ship Weight 128(58)
$3,548.00
J-KEM® Temperature Controller Model 270
J-KEM® Temperature Controller Model 270 The Temperature Controller Model 270 was design for processes requiring uncompromising safety. The only temperature controller available with a built-in independent backup controller to guard against heating accidents from equipment failure. Features: The desired temperature is entered into the digital display of the setpoint controller which regulates heating. A high temperature limit is then entered into the second digital back-up. If the reaction reaches the setpoint of the second controller, power is shut off from the output circuit until the unit is manually reset. Both controllers independently monior the reaction temperature and in the event that one controller fails, the other takes over to prevent a accident. The USB port on the back panel of the controller is an interface to J-KEM’s KEM-Net software. Specifications: Dimensions: 9.25 × 7.75 × 3.4 in Power: 15 Amps @ 120VAC, 1800 Watts Weight: 7 lbs
$1,728.00 - $1,893.00
HUBER Unistat 905 Dynamic Temperature Control / Circulation Thermostat
HUBER Unistat 905 Dynamic Temperature Control (Please Note: There is 8 week shipping lead time) Disclaimer: This item is Non-Refundable once ordered. Unistat Circulators are an ideal solution for fast and precise thermal control of externally connected applications. These systems offer rapid temperature change and a wide temperature range without having to change fluid. The new Pilot ONE controller features a navigation system with easily remembered icons and menus which are sorted by color to make routine work simpler. An amazing software guides you through your set up ensuring all the necessary settings are correct. Unistat 905 208V Data sheet Unistat 905 460V Data sheet General Information & Temperature Controller Unistat 905 208V Unistat 905 460V Temperature range -90 to 250 °C -90 to 250 °C Temperature stability ±0.01 °C ±0.01 Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C 0.01 °C Alarm message optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL Protection class IP20 IP20 Dimensions (W x D x H) 540 x 654 x 1738 mm | 21.26 x 25.75 x 68.43 inches 540 x 654 x 1500 mm | 21.26 x 25.75 x 59.06 inches Weight 396 kg | 873.18 pounds 275 kg | 606.38 pounds Heating / Cooling Capacity Heating capacity 6 kW 6 kW Cooling machine air-cooled air-cooled Refrigerant 1. stage R452A (A1, H280) (2,5 kg) R452A (A1, H280) (2,5 kg) Refrigerant 2. stage R23 (A1, H280) (0,75 kg) R23 Circulation Pump Pressure pump max. 48 lpm ; 0.9 bar | 12.68 gpm ; 13.05 psi 10.57 gpm ; 13.05 psi Pump connection M30x1,5 AG male M30x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Analogue input via optional Com.G@te via optional Com.G@te Analogue output via optional Com.G@te via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Operating Data Old sku 1035.0013.01 1035.0014.01 Permissible ambient temp. 5...35 °C 5...35 °C Filling volume min. 3.2 Liters | 0.85 gal 3.2 Liters | 0.85 gal Volume of expansion 5.3 Liters | 1.4 gal 5.3 Liters | 1.4 gal Power supply 208V 3~ 60Hz 460V 3~ 60Hz Current max 40 A 23,5 A
$101,900.00 - $113,800.00
HUBER CC-505 Refrigerator Bath Circulator
HUBER CC-505 Refrigerator Bath Circulator (Please Note: There is up to 3 weeks Shipping lead time) This Refrigeration Bath Circulator controls the temperature of externally connected applications and Thermoregulation of objects directly in the thermostat bath. Typical applications are: photometers, refractometers, viscometers, double-jacketed reaction vessels and autoclaves. The units can be used in laboratories, for determining the freezing point, for deep temperature calibration, for petroleum tests, for temperature control of measuring devices and experimental setups as well as for materials testing and quality control. Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range -55 to 200 °C Temperature stability ±0.02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 16.14 x 18.9 x 30.08 inches Weight 136.71 Lb Heating / Cooling Capacity Heating capacity 1,6 kW Cooling machine air-cooled Refrigerant R507 (13.22 Lb) Circulation Pump Pressure pump max. 6.6 gpm ; 10.15 psi Suction pump max. 4.89 gpm ; 5.8 psi Pump connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old sku 2018.0010.01 Permissible ambient temp. 5 to 40 °C Bath opening WxD/BD 4.72 x 4.33 / 5.91 inches Bath volume 5 Liters / 1.32 gal Filling volume min. 4 Liters / 1.06 gal Power supply 208V 2~ 60Hz Current max. 12,5 A Fusing 2x16 A
$15,900.00 - $16,400.00
HUBER KISS K6 Refrigerated Heating Bath
HUBER KISS K6 Refrigerated Heating Bath ( Please Note: There is a shipping lead time 2-3 weeks ) The Kiss K6 Refrigerated Heating Baths is ideal for a variety of heating and cooling tasks in research and industry such as sample temperature control, materials testing, quality control, analyses, etc. This unit consist of a stainless steel bath, immersion thermostat, pressure and suction pump with wetted materials made from industrial plastic or stainless steel, and air cooled refrigeration unit. In addition, the cooling circulators include automatic refrigeration capacity adjustment which reduces energy consumption and waste heat down to the absolute essential. New KISS controller combines state-of-the-art technology with stylish design. The simple to navigate menu makes operating these baths as easy as pushing a few buttons. Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range -25 to 200 °C Temperature stability ±0.05 °C Temperature Display OLED Display Alarm message optical, acoustical Controller KISS Safety class III / FL Protection class IP20 Dimensions (W x D x H) 210 x 400 x 546 mm | 8.27 x 15.75 x 21.5 inches Weight 25 kg | 55.12 pounds Heating / Cooling Capacity Heating capacity 1,5 kW Cooling capacity 20 0 -10 -20 °C0,2 0,15 0,1 0,05 kW Cooling machine air-cooled Refrigerant R290 (A3, H220) (0,047 kg) Circulation Pump Pressure pump max. 14 lpm ; 0.25 bar | 3.7 gpm ; 3.62 psi Suction pump max. 10.5 lpm ; 0.17 bar | 2.77 gpm ; 2.47 psi Pump connection M16x1 AG male Connections Digital interface USB, RS232 Operating Data Old sku 2008.0023.99 Permissible ambient temp. 5 to 40 °C Bath opening W x D / BD 5.51 x 4.72 / 5.91 inches Bath volume 4.5 Liters | 1.19 gal Power supply 110-120V 1~ 50/60Hz Current max. 15 + 3,2 A
$6,570.00 - $7,070.00
HUBER CC-304B Heating Bath Circulator
HUBER CC-304B Heating Bath Circulator (Please Note: There is a shipping lead time of 2 - 3 weeks) Heating Bath Circulators with a stainless steel bath allow the temperature control of internal and external thermoregulation tasks. Items can be directly thermoregulated by placing them in a thermostat bath and the control of externally connected applications is also possible. Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range (-20) 28...300 °C Temperature stability ±0,02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 8.27 x 13.19 x 15.43 inches Weight 28.66 Lb Heating / Cooling Capacity Heating capacity 3 kW Circulation Pump Pressure pump max. 6.6 gpm ; 10.15 psi Suction pump max. 4.89 gpm ; 5.8 psi Pump connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old Sku 2005.0002.01 2005.0002.01-UL Permissible ambient temp. 5 to 40 °C Bath opening WxD/BD 5.12 x 3.94 / 6.1 inches Bath volume 5 Litres Filling volume min. 3,2 Litres Power supply 110V - 50/60Hz Current max. 14 A Fusing 15 A
$6,860.00 - $7,360.00
You have seen 793 out of 793 products