4/20 SALE! GET UP TO 20% OFF STOREWIDE UNTIL 4/26!

Light Controllers & Meters

9 products


  • Sale -33% PHOTOBIO Advanced Quantum PAR Meter Hydroponic Center PHOTOBIO

    PHOTOBIO Advanced Quantum PAR Meter

    PHOTOBIO Advanced Quantum PAR Meter Product Details All new for 2020, the Advanced Quantum PAR Meter provides accurate and cost-effective measurement for all light sources used to grow plants.  The PHOTOBIO by Phantom Quantum PAR meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700nm. There is a proportional relationship between the number of photons absorbed in 400 to 700nm band and the rate of photosynthesis in plants, which is important for horticultural studies and monitoring plant physiology. The Advanced light meter comes complete with a remote sensor, two connection cables, the main unit and easy to replace AAA batteries. The PAR meter can store up to 99 measurements for easy reference.  Portable PAR meter with highly accurate remote quantum sensor Measures photosynthetically active radiation (PAR) from 400 to 700 nm Simple and easy to use Record up to 99 readings Includes short coiled and long straight connection cables   Instructions 

    $219.99$146.76

  • Sale -23% Autopilot PX2 Advanced Lighting Controller Hydroponic Center Autopilot

    Autopilot PX2 Advanced Lighting Controller

    Product Details More powerful, more reliable, more capable The Autopilot PX2 Advanced Lighting Controller provides precision photoperiod control of up to 512 fixtures in two independently controlled zones, all from one centralized location. Designed to work with any controllable Phantom or Core HID fixtures, as well as PHOTOBIO LED fixtures, the PX2 can control 512 digital HID fixtures (256 per zone), or 100 analog LED fixtures (50 per zone). The PX2 offers the flexibility to operate both zones analog or digital, or one zone analog and the other digital. With this versatile, dual-zone configuration, growers can ... Optimize spectral treatments by checkerboarding lighting technologies within the same environment (e.g., HPS with CMH, LED with CMH) Save power by checker boarding identical fixtures while reducing output to one of the zones during the light cycle within the same environment Alternate rows and zones within the same environment Enhance uniformity by independent control over perimeter versus interior of the environment  Powerful features, precise and independent controls: The PX2 provides independent control of the following features in each of its dual zones:  Photoperiod timing to control light and dark cycles Photosynthetic photon flux control to precisely schedule the PPF being emitted from fixtures during the light cycle (wattage or percentage) Auto-dimming when temperature exceeds set points Emergency auto-shutdown of lights upon user-defined over-temperature events Configurable restrike delay times to eliminate lamp-damaging hot starts Sunrise/sunset simulation settings to provide a gradual ramp-up and down at both ends of your photoperiod Built-in battery backup  Voltage: 100–240V 50/60Hz 0.3 Amps  Two dedicated temperature sensors, one for each zone: These sensors provide real-time data for automated temperature-based dimming, as well as a high temperature shutdown feature that protects your garden. The PX2 eliminates inrush current and replaces traditional lighting contactors, reducing infrastructure investment.  Updated locking signal and data cables: All cables are shielded from electromagnetic interference to ensure uncompromising signal reliability and communication.  Includes: (1) Autopilot PX2 with locking mini 3P IP65 female lighting connectors (2) 50' white temperature probes (2) 20' locking mini 3P M-RJ 6P white RF shielded data cables (for use with controllable Phantoms) (2) 20' locking mini 3P M-2P M white RF shielded data cables (for use with PHOTOBIO LEDs) (1) 5' 100–240V, 50/60Hz power adapter (2) Mounting screws (1) Instruction manual

    $411.99$317.26

  • Sale -28% Autopilot Dual-Outlet Analog Grounded Timer, 1725W, 15A, 15-Minute On/Off, 24 Hour Hydroponic Center Autopilot

    Autopilot - Dual-Outlet Analog Grounded Timer, 1725W, 15A, 15-Minute On/Off, 24 Hour

    Using an analog timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features:  15 minute on/off 24 hour cycle Controls two outlets simultaneously 15A/1725W UL-listed

    $18.99$13.70

  • Sale -28% Autopilot 7-Day Grounded Digital Programmable Timer, 1725W, 15A, 1 Second On/Off, 8 On/Off Cycles Autopilot

    Autopilot 7-Day Grounded Digital Programmable Timer, 1725W, 15A, 1 Second On/Off, 8 On/Off Cycles

    Using a timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features 1 second on/off Up to 8 on/off cycles per day Excellent for hydroponic systems 15 amp UL-listed FOR MORE THAN 8 ON/OFF CYCLES PER DAY, USE APCTART 1 minute on/off Up to 8 on/off cycles per day Excellent for hydroponic systems 15 amp maximum load UL-listed for safety

    $23.99$17.31

  • Sale -24% Autopilot Surge Protector with 8 outlets & timer Autopilot

    Autopilot Surge Protector with 8 outlets & timer

    Expand wall outlets and control your equipment with this 8-outlet power strip with surge protection and built-in timer. Offers 4 timed outlets and 4 always-on outlets, with indicator lights for each type. Timer has 15-minute increment pins. Timer override switch provided. Lighted power switch also acts as circuit breaker/reset. Features 4 timed, 4 constant outlets Power indicator Surge protector 6' power cord Circuit breaker switch for safety

    $31.99$24.18

  • Sale -34% Autopilot Analog Grounded Timer, 1725W, 15A, 15 Minute On/Off, 24 Hour Autopilot

    Autopilot Analog Grounded Timer, 1725W, 15A, 15 Minute On/Off, 24 Hour

    Using an analog timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features 15 minute on/off 15A/1725W Great for lighting, pumps, etc. Includes convenient clam shell packaging UL-listed

    $16.69$10.96

  • Sale -48% Autopilot 24 hr Day & Night Cooling/Heating Thermostat Hydroponic Center Autopilot

    Autopilot 24 hr Day & Night Cooling/Heating Thermostat

    Autopilot 24 hr Day & Night Cooling/Heating Thermosta   Product Details Autopilot 24 hr Day & Night Cooling/Heating ThermostatThe APCET2 is a temperature controller that can be used as a cooling OR a heating device. It automatically powers the device connected based on the selected day and night set points. The user can choose to have different day and night temperature set points that are automatically detected by the built-in photocell. The knobs make it easy to adjust the settings. We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped. Controls heating or cooling equipment with both day/night set points  Includes 20' remote precision temperature sensor  Temperature control differential +/- 3°F  Built-in photocell  50°F–100°F control range  120v, 15 amps max

    $79.30$41.40

  • Sale -33% FUEL Light Controller Hydroponic Center Autopilot 8 Outlet - 240V

    FUEL Light Controller

    FUEL Light Controller     Product Details 8 Outlet The FUEL ST8 represents the latest in professional lighting control. It is among the best devices for controlling up to 8 lights. This unit features 240V industrial-grade NEMA 6-15 UL-listed power outlets. All outlets are controlled by a 120V trigger cable. The 8 light controller has 2 banks of 4 lights. Each bank has a 30-second time delay and is protected by an industrial-grade circuit breaker. The FUEL ST8 requires a 50A main power supply and has a maximum ballast load of 40A. Each power outlet receptacle is rated 240V, 5A maximum. Keep your grow lights in complete control with Autopilot's professional line of FUEL light controllers. 8 Outlet/240V/60Hz 50A main power supply Maximum ballast load 40A Each receptacle rated 240VAC 5A MAX NEMA 6-15 UL-listed power outlets ETL-listed Commercial grade 2-year warranty user manual  12 X-plugs The FUEL SX12 represents the latest in large scale lighting control. It is among the best devices for controlling up to 12 lights. This unit features 120/240V universal style X-plug outlets, which allow the controller to operate 120V or 240V ballasts depending on the wired voltage. All outlets are controlled by one 120V trigger cable. The 12 light controller has 3 banks of 4 lights. Each bank has a 30-second time delay. The FUEL SX12 requires an 80A main power supply and has a maximum ballast load of 60A. Each duplex receptacle is rated @ 10A maximum. Keep your grow lights in complete control with Autopilot's professional line of FUEL light controllers. 12 Outlet, 120/240V, 60Hz 80A main power supply Maximum ballast load 60A Each duplex receptacle rated 10A MAX Universal (120/240V) X-plug receptacles Powder-coated steel enclosure Commercial grade 2-year warranty User Manual  12 outlet single trigger Product DetailsThe FUEL ST12 represents the latest in large scale professional lighting control. It is among the best devices for operating up to 12 lights. This unit features 240V industrial-grade NEMA 6-15 UL-listed power outlets. All outlets are controlled by a single 120V trigger cable. The 12 light controller has 3 banks of 4 lights. Each bank has a 30-second time delay and is protected by an industrial-grade circuit breaker. The FUEL ST12 requires an 80A main power supply and has a maximum ballast load of 60A. Each power outlet receptacle is rated 240V, 5A maximum. Keep your grow lights in complete control with Autopilot's professional line of FUEL light controllers. 80A main power supply Maximum ballast load 60A Each receptacle rated 240VAC 5A MAX NEMA 6-15 UL-listed power outlets ETL-listed Commercial grade 2-year warranty User Manual  16 outlet The FUEL DT16 represents the latest in large scale professional lighting control. It is among the best devices for controlling up to 16 lights. This unit features 240V industrial-grade NEMA 6-15 UL-listed power outlets. All outlets are controlled by two 120V trigger cables. Each trigger cable controls 8 lights. The 16 light controller has 4 banks of 4 lights. Each bank has a 30-second time delay and is protected by an industrial-grade circuit breaker. The FUEL DT16 requires a 100A main power supply and has a maximum ballast load of 80A. Each power outlet receptacle is rated 240V, 5A maximum. Keep your grow lights in complete control with Autopilot's professional line of FUEL light controllers. 16 Outlet/240V/60Hz 100A main power supply Maximum ballast load 80A Each receptacle rated 240VAC 5A MAX NEMA 6-15 UL-listed power outlets ETL-listed Commercial grade 2-year warranty User Manual     

    $97.49 - $557.05

  • Sale -22% Autopilot Analog to Digital Conversion Module Autopilot

    Autopilot Analog to Digital Conversion Module

    Autopilot Analog to Digital Conversion Module (4/cs)   The Autopilot APBC1001 signal conversion module is ideal for facilities utilizing commercial environmental controllers to control lighting. The module converts analog 0–10V and 0–11.5V signal into digital RS-485 signal. It features two analog inputs and four digital outputs, divided into two zones. Each zone controls 256 fixtures, for a total of 512 fixtures per module. The included white data link cables are shielded against electromagnetic interference, with IP65 connectors that protect against dust and liquid ingress. The module is compatible with 1000W, 750W, 315W dual, and 315W single fixtures. Includes: One Autopilot APBC1001 Signal Conversion Module One DC power supply Six 20' white data link cables:(2) data link cables for analog input(4) data link cables for digital output

    $196.80$153.11