Bentonite

BVV™ Filtration Media CRC Starter Bundle   This is the BVV recommended starter bundle for anyone venturing in to closed loop Color Remediation and desiring to make a clear and cleaner end product.  This bundle works well with any of our Inline CRC hardware kits. (Seen here: ICRC300) BVV recommends a Pressure Flow through this bundle @ 30PSI.  What's Included in the Bundle? BVV™ Silica Gel 60A - BVV™ Chromatographic Silica Gel is as premium as it gets. We recommend this for our Top layer of the CRC to grab fats, waxes and color bodies.  It wont take the place of full dewaxing but it does a darn good job on its own.  We recommend 30-50g of Silica per lb. biomass as the top layer of your filtration stack depending on the age of your material and the diameter of your filtration column.  Pure-Flo® B80 Natural Bentonite for Bleaching - Pure-Flo® B80 will remove chlorophyll, color bodies, fats, waxes.  Its natural neutral pH will help retain terpene flavonoids and clarify and remove dark colors from your oils.  B80 is the most commonly used CRC media in extraction.  We recommend you use 100g of bentonite Clay per lb. biomass above a layer of Activated Alumina. BVV™ Activated Alumina - BVV™ Activated Alumina is granular media excellent for grabbing water and waxes.  We recommend Activated Alumina as the bottom layer of your filtration stack to absorb moisture at 30-50g per lb. biomass depending on the diameter of your filtration column.      

Read more less

Activated Bentonite Clay T-5™ BVV™ activated Bentonite Clay T-5™ is a highly effective decolorizing agent for filter organic materials. This Clay is tan in color and is Heat Activated to help remove Anthocyanin pigments while preventing isomerization.  This is a slow filtering media but will produce high clarity when used as a filter aid.  pH:7     BVV™ Activated Bentonite Clay T-5™

Read more less

Pure-Flo® B80 Bentonite for Decolorizing Edible Oils and Fats What is “Pure-Flo® B80 Natural Bentonite for Bleaching & Decolorizing Edible Oils *FDA-GRAS Instead of removing oil contaminants with harsh chemical additives, our Natural Bentonite Clay B80 uses the clay's inherent properties to purify the targeted oil. This means that naturally-active B80 poses no threat of mineral acid carryover in any finished oil products while significantly reducing red coloring and adsorbing chlorophyll.  As an example, a typical dosage of B80 (anywhere between 0.5% and 1.0%) during the bleaching and deodorizing process of sunflower oil can help achieve a great improvement in the color complexion by removing its red pigmentation.  Our B80 Product’s Benefits and Features This bleaching/decolorizing adsorbent is widely-used during the pretreatment and processing of edible oils and fats. It’s considered to be cost-effective, natural, and of excellent value due to its effective color removal without any mineral acid carryover.  ph Level: 7.2 FDA GRAS-Approved (Generally Recognized as Safe):  This product is regarded to be safe for food processing, as long as it's not a part of the end product being consumed.  NSF-HACCP: Prior to the changes in its down packing, this product was certified Kosher & Halal. However, it does not retain its certifications after considering its down packing. Unfortunately, BVV™ doesn't have an on-staff and on-site Rabbi or Imam to re-establish those certifications. We apologize to our patrons for the inconvenience. Shop all Solvents & Gas on BVV! Note: Container style and color may vary. Product is sold by weight which may result in the container not being full when received. Product Safety and Related Information Pure-Flo® Quality Standards and Certifications Pure-Flo globally delivers high-quality, natural bleaching products. “Our manufacturing process includes modern hygiene controls at every stage in the production of Pure-Flo products. Our controls follow the HACCP approach consistent with EU Regulations. The HACCP system used in our production process is certified by NSF, an independent certification organization. Pure-Flo products are also certified both Kosher and Hallal for use in food processing.” BVV™ Technical and Safety Data Forms B80 Technical Data Sheet B80 Safety Data Sheet     Note:  Bulk Bags and Bulk sizes are non-stocked items and will be ordered as needed and carry a several weeks lead time and require a forklift or pallet jack Note: Container style and color may vary. Product is sold by weight which may result in container not being full.

Read more less

Pure-Flo® B81 Supreme  Moderately Activated Bentonite Clay for Bleaching & Decolorizing Edible Oils pH:4.4 Pure-Flo® B81 Supreme Offers fats and oils processors surface modified performance at the best value. Excellent for oils with moderate color and chlorophyll levels. Supreme B81 adsorbent has been activated using a proprietary Surface Modification Technology (SMT). Pure-Flo® Supreme B81 Data Sheet.pdf B81 Supreme Safety Data Sheet  • Excellent metals adsorption characteristics (P, Ca, Fe, Mg, Ni, etc.)• Removes color bodies from a variety of oils and effectively eliminates   chlorophyll from vegetable oils• Removes soaps and phospholipids• Minimizes free fatty acid rise during bleaching• Outstanding filtration characteristics, including long filtration cycles and lesspressure build up at cycle end ph:4.4 FDA GRAS (Generally Recognized as Safe) -  This product is safe for processing food, as long as its not part of the end product being consumed.  NSF- HACCP *Prior to down packing this product was certified Kosher & Hallal. It does not retain its certifications after down packing, Sorry BVV™ doesn't have an on staff Rabbi or Imam on site to re-establish those certifications.     Note:  Bulk Bags and Bulk sizes are non-stocked items and will be ordered as needed and carry a several weeks lead time and require a forklift or pallet jack

Read more less

Pure-Flo® Perform 5000 Highly Activated Bentonite Clay for Bleaching & Decolorizing Edible Oils pH: 2.7 Pure-Flo® Perform 5000 provides superior bleaching activity for demanding oils.  Effective with all types of difficult-to-bleach oil.  Pure-Flo® Perform 5000 Technical Data Sheet.pdf Perform 5000 Safety Data Sheet  Excellent metals adsorption characteristics (P, Ca, Fe, Mg, Ni, etc.) Excellent Chlorophyll removal Excellent Red and Blue color body removal. Removes soaps and phospholipids Outstanding filtration characteristics, including long filtration cycles and less pressure build up at cycle end. ph:2.7 FDA GRAS (Generally Recognized as Safe) -  This product is safe for processing food, as long as its not part of the end product being consumed.  NSF- HACCP *Prior to down packing this product was certified Kosher & Hallal. It does not retain its certifications after down packing, Sorry BVV™ doesn't have an on staff Rabbi or Imam on site to re-establish those certifications. Note:  Bulk Bags and Bulk sizes are non-stocked items and will be ordered as needed and carry a several weeks lead time and require a forklift or pallet jack

Read more less

Highly Activated Bentonite Clay for Bleaching & Decolorizing Edible Oils pH: 2.5   Pure-Flo® Perform 6000 is a highly activated bentonite clay that is used to purify extremely difficult to bleach oils with the most challenging levels of chlorophyll and color bodies. Particle Size: 325 Mesh Color: Beige Performance Features & Benefits: Filter Aid Removes phosolipids Excellent Metal adsorption (P, Ca, Fe, Mg, etc.) Effective with all types of difficult-to-bleach oil Top chlorophyll removal in its class & improved red color reduction pH 2.5 FDA GRAS (Generally Recognized as Safe) -  This product is safe for processing food, as long as its not part of the end product being consumed.  Pure-Flo® Perform 6000 Data Sheet.pdf Pure-Flo® Perform 6000 Safety Data Sheet (SDS).pdf   Note:  Bulk Bags and Bulk sizes are non-stocked items and will be ordered as needed and carry a several weeks lead time and require a forklift or pallet jack   Note: Container style and color may vary. Product is sold by weight which may result in container not being full.

Read more less

Color Bleaching Clay This product is similar to T-41, as it is an Acid Activated Bentonite Clay for Bleaching & Decolorizing Edible Oils. BVV™ Color Bleach is a filtration aid used in refining and increasing the purity and clarity of the final product. The BVV™ Clay Bleach is composed of a 10:1 ratio of Pure-Flo® Perform 6000 and BVV™ T-1 Hardwood Activated Carbon. This product is 100% made in the USA, and the components are FDA-GRAS and NSF Certified.   This bleaching clay not only improves the purity and clarity of the end product, it also improves the color and clarity. This is a strong acid-activated media and the acid will be critical in removing red, purple, and blue pigments known as Anthocyanins. This media can be used in a Color Remediation Column, or between Short Path Distillation runs with a Hot Scrub, to make your distilled oil clean and more clear.  Key features of Color Bleach for Edible Oils: • Excellent metals adsorption characteristics (P, Ca, Fe, Mg, Ni, etc.)• Outstanding color, and chlorophyll removal from oil. • Removes soaps and phospholipids• Enhanced removal of chlorophyll from added Hardwood Carbon.• Fast filtering characteristics, including long filtration cycles and lesspressure build-up at cycle end. pH: 3.0 FDA: GRAS (Generally Recognized as Safe) -  This product is safe for processing food, as long as its not part of the end product being consumed.  NSF: HACCP *Prior to down packing this product was certified Kosher & Hallal. It does not retain its certifications after down packing, BVV™ doesn't have an on-staff Rabbi or Imam on-site to re-establish religious certifications for this product. Safety Data Sheet:  BVV™ Color Bleach  SDS BVV™ Color Bleach Technical Data Sheet

Read more less

Chemtek W1  W1 (TM) is an acid activated bentonite clay adsorbent specific for the removal of chlorophyll, heavy metals, and fats. W1 is very effective at bleaching and refining while preserving the terpenes present in the oil. Unlike other clays, the ability to remove soaps and free fatty acids which are produced during the bleaching process reduces the amount of clay needed to bleach. W1 SDS W1 Technical Data Sheet 

Read more less

CHEMTEK W2 Heat Activated Natural Bleaching Clay W2 is a natural bleaching clay offering mild yet efficient results. It is heat activated to increase its adsorptive power without the use of any acids. The lack of acid prevents terpene isomerization and keeps the terpene profile the same while also slowing the oxidation rate of the oil thus increasing its shelf life. W2 is heavier in bulk density giving it lower oil retention. W2 SDS W2 Technical Data Sheet

Read more less

CHEMTEK W3 Acid Activated Bleaching Clay W3 is a highly active adsorptive clay designed for difficult to bleach oils. It has a high cation exchange capacity paired with high moisture content making it ideal for adsorption of impurities such as chlorophyll, carotenes, heavy metals, phospholipids, soaps, and other impurities. W3 SDS W3 Technical Data Sheet

Read more less

CHEMTEK W4 Pesticide Remediation Bleaching Clay W4 is an alkaline bleaching clay specialized for the removal of pesticides, chlorophyll, free fatty acids, and oxidized compounds. It removes pesticides through adsorption and hydrolysis. Pesticides undergo alkaline hydrolysis, in which a pH greater than 7 causes chemical degradation of certain pesticides in the presence of ions. W4 SDS W4 Technical Data Sheet  

Read more less

CHEMTEK W5 Neutral Bleaching Clay W5 is a neutral bleaching clay specialized for the removal of heavy metals. While most sorbents will remove heavy metals, the acids involved in the activation process could cause desorption. By neutralizing the clay processors can take advantage of the increased surface area without any risk of desorption. W5 SDS W5 Technical Data Sheet  

Read more less

CHEMTEK ChloroSorb Neutral ChloroSorb Neutral is an acid-activated bentonite/carbon adsorbent that has been neutralized to a neutral pH of 7. General uses are bleaching, deodorizing, or heavy metal removal. ChloroSorb Neutral SDS 

Read more less

ChloroSorb Natural Filtering Media is a heat-activated bentonite/carbon adsorbent for bleaching and deodorization. Contains 10% carbon. ChloroSorb Natural SDS 

Read more less

ChloroSorb Filtering Media is an acid-activated bentonite/carbon blend for bleaching and deodorization. It is generally used for additional bleaching efficiency in conjunction with other sorbents. Contains 5% carbon. ChloroSorb SDS

Read more less

Carbon Chemistry T-5™ Neutral Activated Bentonite Clay  T-5™ Neutral Activated Bentonite Clay is an excellent filtration media with a neutral pH. It is designed for fast filtering, with less clogging than you would normally expect. Carbon Chemistry T-5™ Neutral Activated Bentonite Clay - SDS Note:  Bulk Bags and Bulk sizes are non-stocked items and will be ordered as needed and carry a several week lead time and require a forklift or pallet jack

Read more less

Carbon Chemistry T-41™ Acid Activated Bleaching Clay Acid-activated bentonite clay (or activated bleaching clay) is used as an effective filtration media. The clay is rich in carbon, and it has a low pH. This product is most commonly used as a scrub or bleaching clay during oil purification, distillation preparation, pesticide removal, and product improvement including odor removal and visual improvement. Carbon Chemistry T-41™ Acid Activated Bleaching Clay - SDS

Read more less

This Extra Strength GASPLUG Clear Mix is a special mixture of minerals that electromagnetically affixes themselves to plant compounds and pigment, removing the bad stuff from extracted oil, and purifying your oil.  Gas Plug Clear Mix #10 Extra Strength SDS CONTAINS: CARBON, SILICA, MAGNESIUM. * DISCLAIMER * You should only lose yield from your oil in correspondence to the amount of residual plant compound removed. If you lose more than 20% yield from gold oil, you have done it wrong. It is not uncommon to have a 50-60% cannabinoid crude oil that loses 30-40% yield under refinement. The amount of yield loss should be proportionate to the overall potency. 

Read more less

A mixture of minerals that electromagnetically affixes themselves to plant compounds and pigment, removing the bad stuff from extracted oil, and purifying your oil  Gas Plug Clear Mix #01 SDS CONTAINS: CLAY, SILICA, MAGNESIUM, CARBON. * DISCLAIMER * You should only lose yield from your oil in correspondence to the amount of residual plant compound removed. If you lose more than 20% yield from gold oil, you have done it wrong. It is not uncommon to have a 50-60% cannabinoid crude oil that loses 30-40% yield under refinement. The amount of yield loss should be proportionate to the overall potency. 

Read more less

Gas Plug Clear Mix #02 This special Ethanol Blend is a mixture of minerals that electromagnetically affixes themselves to plant compounds and pigment, removing the bad stuff from extracted oil, and purifying your oil  Gas Plug Clear Mix #02 SDS CONTAINS: CARBON, SILICA, MAGNESIUM. * DISCLAIMER * You should only lose yield from your oil in correspondence to the amount of residual plant compound removed. If you lose more than 20% yield from gold oil, you have done it wrong. It is not uncommon to have a 50-60% cannabinoid crude oil that loses 30-40% yield under refinement. The amount of yield loss should be proportionate to the overall potency. 

Read more less

Purify and prepare your oil with Bentonite Clay ‘L-5’ Gas Plug L-5 Bentonite Clay SDS

Read more less

Purify and prepare your oil with U42 Activated Bleaching Clay.  Gas Plug U42 Activated Bleaching Clay SDS

Read more less