Heated Baths

9 products


  • Polyscience Model 210 Heated Recirculator

    Polyscience Model 210 Heated Recirculator

    Polyscience Model 210 Heated Recirculator   Specification Description Heated Recirculator Working Temperature Range °C Ambient to 70° Temperature Stability °C ±0.2° Pump Type Centrifugal Working Temperature Range °F Ambient to 158° Working Temperature Range °C Ambient to 70° Temperature Stability °F ±0.4° Temperature Stability °C ±0.2° Pump Type Centrifugal Pump Speed Single Process Connections 1/2" barb fitting Over-Temperature Protection / Failsafe Heater Control Yes Low Liquid Level Protection Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 8 x 9.5 x 8 in Overall Dimensions (L x W x H) (cm) 20.3 x 24.1 x 20.3 cm Shipping Weight (pounds) 12.0 Shipping Weight (kilograms) 5.4 Catalog Page Number 67 60 Hz Only Part Number 40300 Maximum Pressure (psi) 2.0 Maximum Pressure (bar) 0.13 Maximum Pressure Flow Rate (gpm) 3.00 Maximum Pressure Flow Rate (l/min) 11.4 Included Hardware Tubing and clamps Heater Wattage 750   key Features: Low-cost pumping and heating for closed-loop applications Provides accurate control within a frequently used temperature range Ideal for applications such as thawing plasma, temperaring photographic solutions or circulating to an external device Over-Temperature Protection Failsafe Heater Control   Operator's Manual

    $1,598.00

  • Cascade 20L Bead Bath with 15L Lab Armor Beads

    Cascade 20L Bead Bath with 15L Lab Armor Beads

    Cascade 20L Bead Bath   Bye-Bye Water Bath! Traditional water baths are associated with messy condensation and the growing of harmful germicides. Cascade Sciences Bead Baths are the next generation of a decades-old lab bath technology. With the included thermal beads, this 20L Cascade Bead Bath operates in a constant, stable, broad temperature range between -80°C to +180°C. The bath itself delivers exceptional temperature uniformity up to 80°C. Zero Evaporation Saves Energy In a water bath, the water is constantly evaporating. As water evaporates, it cools. Because evaporation has a cooling effect, a water bath must heat more frequently. A bead bath uses 4X less energy when set to 65°C and 2X less energy at 37°C. The bead bath also provides more constant temperature with fewer temperature fluctuations during operation. Cascade Sciences Bead Baths and Thermal Beads and Made in the USA and NRTL Certified Cascade Sciences Bead Bath Features: High Thermal Efficiency Microbial/Biofilm Resistant Cross-Contamination Resistant Minimal Cleaning No Refilling No Rack or Accessory Needed Angled Incubation Possible Constant Volume  – No Evaporation Non-Corrosive Compatible with non-water tight vessels Independent build-in over-temp, burn-out protection No Warm Up Mobile or Field Use Compatible Non-Combustible Thermal Beads Replace Water and Ice Lab Armor™ Thermal Beads are small, dry, metallic thermal beads designed to replace water in laboratory water baths and ice in ice buckets. Their high thermal conductivity technology is patented and improves energy efficiency of standard water baths by over 50%. Improve lab cleanliness when using thermal beads in place of fluid in water baths. Thermal Beads – Recyclable Lab Armor™ Thermal Beads are formed from solid recyclable metal. The raw material used in Lab Armor™ Beads can be reused in other products. Lab Armor™ Thermal Bead Features: Metal composition with smooth round surface Moisture and gas impermeable High thermal conductivity Working temperature range is -80°C to 180°C Non-toxic, non-vaporizing material Recyclable! Multiple uses – ice replacement Frequently Asked Questions Are Lab Armor™ beads autoclavable?They are not. The steam and pressure ruins the surface of the beads. We recommend a dry heat sterilization: 180°C for 2.5 hours. For a quick touch-up we recommend spritzing with 70% ethanol and stirring. If some debris falls into the beads we recommend placing them in a pail with water and a small about of Dawn, rinsing out multiple times, and then putting through the dry heat sterilization process. How long can I use Lab Armor™ Beads under normal conditions?Under normal conditions, Lab Armor™ Beads should last the life of the bath. If used incorrectly or if not maintained and cleaned properly, the surfaces of Lab Armor™ Beads can become damaged. We recommend that you avoid strong detergents, acids and bases. Bleach, for instance, may tarnish the surface of the Lab Armor™ Beads, reducing its fluidity and overall performance. Can Lab Armor™ Beads be used as an ice bath?There are a number of different ways to use thermal beads. Many customers place containers of beads in their refrigerators, incubators and ovens. When creating an ice bath, be sure to keep the beads dry. We recommend separating the beads from the ice packs, which accumulate condensation. Some kind of mesh wire or fabric helps with this as well. Also, any condensation that builds on the surface of the beads will be able to drip through the mesh. It’s important to keep the beads from soaking in water for extended periods of time. Besides attracting contamination, excessive water contact will tarnish the surface of the Beads and reduce the fluidity of the bath. Also, as an alternative to ice packs, dry ice can be used to make a colder bath (<0ºC).

    $3,450.00

  • Sale -27% Polyscience 5 Liter General Purpose Water Bath

    Polyscience 5 Liter General Purpose Water Bath

    Polyscience 5 Liter General Purpose Water Bath  Key Features: Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads     Specifications Working Temperature Range °F Ambient +10° to 212° Reservoir Capacity (liters) 5 Reservoir/Tank Material Stainless Steel Reservoir Cover Hinged Gable Working Access (L x W x D) (inches) 5 x 10.8 x 6 Temperature Stability °F ±0.2° Display 3.25" Flammability Class (DIN 12876-1) I (NFL) Over-Temperature Protection / Failsafe Heater Control Yes Maximum Ambient Temperature °F 104° Overall Dimensions (L x W x H) (inches) 12 x 14.5 x 13.5 Shipping Weight (pounds) 14.0 60Hz Only Part Number WB02A11B Included Hardware Sample Tray Heater Wattage 120 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/1.1 Regulatory Approvals ETL

    $817.00$600.00

  • Polyscience 10 Liter General Purpose Water Bath

    Polyscience 10 Liter General Purpose Water Bath

    Polyscience 10 Liter General Purpose Water Bath   Key Features: Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads     Specifications Working Temperature Range °F Ambient +10° to 212° Reservoir Capacity (liters) 10 Reservoir/Tank Material Stainless Steel Reservoir Cover Hinged Gable Working Access (L x W x D) (inches) 10.6 x 11.6 x 6 Temperature Stability °F ±0.2° Display 3.25" Flammability Class (DIN 12876-1) I (NFL) Over-Temperature Protection / Failsafe Heater Control Yes Maximum Ambient Temperature °F 104° Overall Dimensions (L x W x H) (inches) 17 x 15.5 x 15.5 Shipping Weight (pounds) 22.0 60Hz Only Part Number WBE10A11B Included Hardware Sample Tray Heater Wattage 1000 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/8.6 Regulatory Approvals ETL   Certifications: Regulatory Approvals: ETL Regulatory Approvals: CE

    $974.00

  • Lab Armor Peltier Bead Bath

    Lab Armor Peltier Bead Bath

    Lab Armor Peltier Bead Bath   Lab Armor revolutionizes the scientific bath industry with the Peltier Bead Bath! ​Utilizing Peltier Thermoelectric Cooler-Heater (TEC-H) technology, the Peltier Bead Bath is an all-in-one unit that efficiently controls the temperature in chilled and heated applications. The air jacketed design is exclusive to the Lab Armor Peltier Bead Bath, and it is the only bead bath on the market with both cooling and heating capabilities.   The Peltier Bead Bath works with Beads to deliver exceptional temperature uniformity! ​The Lab Armor Peltier Bath securely holds lab vessels of various sizes in place. Samples may be conveniently transported using the removable Lab Armor Peltier Bead Baskets. The Bead Bath helps prevent the risk of sample contamination by removing water from many laboratory processes. These design features allow the Peltier Bead Bath to perform the role of multiple appliances, reducing benchtop space requirements.  

    $3,934.32 - $6,206.61

  • Lab Armor BEAD BATH

    Lab Armor BEAD BATH

    BEAD BATH Unique DESIGN Lab Armor Bead Baths were specifically designed to work with Lab Armor Beads to optimize their performance.                     ​Uniform Temperatures With Bead Bath designed expressly for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is  +/-1.0 at 37ºC. ​Always On The bath always stays on, so you don’t have to plan around warmup times. You don’t need to worry about refilling or low water burnout because there is no water to evaporate. ​Lab Armor Bead Baths are up to 50% more energy efficient than a standard lab water bath. ​Stays Clean Lab Armor reduces the risk of contamination. Contaminated samples and reagents result in distorted data and unpredictable outcomes. ​Stays Organized Unlike water baths that require racks, floats, and bottleneck weights, Bead Bath naturally holds things in place without accessories. So no more floating accidents.

    $1,428.95 - $2,813.02

  • Lab Armor Beads

    Lab Armor Beads

    Lab Armor Beads Modern Upgrade Lab Armor Beads are dry metallic beads that replace water/ice/oil/sand in baths, giving old equipment a cool, shiny, state-of-the-art upgrade.                 ​Stays clean Lab Armor eliminates water bath contamination, harmful germicides, and unpleasant maintenance.  Beads are dry and naturally more resistant to microbial growth than water, and therefore, are less likely to harbor and contribute to transmitting microorganisms in the laboratory.  Saves time & Money Lab Armor Beads will help you save time and money. No more hassling with emptying, cleaning, and refilling water baths. Always On The bath stays on so there is no need to plan around warm-up times. Lab Armor Beads eliminate the worry about low water burnout because there is no water to evaporate. ​Other benefits of using Lab Armor Beads: Cleaner working environment. Greater organization capabilities as samples are held in place. Environmentally friendly. Temperature range  -80°C to 180°C. High thermal conductivity. Non-toxic, non-vaporizing, antimicrobial No daily requirement for biocides, germicides, and other cleaners. No gray water. Smooth rounded shape allows fluidity and will conform to many sizes and shapes of vessels. No Racks, floats or weights required to hold items in place. Recyclable.* Weight 4 Lbs. (1.81 kg) per Liter.

    $214.49 - $857.93

  • PolyScience Floating Ball Cover; 3/4" (19 mm) diameter

    PolyScience Floating Ball Cover; 3/4" (19 mm) diameter

    PolyScience Floating Ball Cover; 3/4" (19 mm) diameter Description Covers top of any open tank. Reduces fumes, splashing hazard and heat loss by 75% and evaporation by 87%. Usable to 95°C. Package of 400 Quantity: 1 pkg Part Number: 060301 For use with:  Circulating Baths Stainless Steel Open Bath Systems Polycarbonate Open Bath Systems General Purpose Water Baths

    $133.00

  • Sale -25% PolyScience polyclean CLARIFIER - 8 oz

    PolyScience polyclean CLARIFIER - 8 oz

    PolyScience polyclean CLARIFIER      - 8 oz  Description Keeps reservoirs clean and odor-free. Concentrated: 8 oz (237 ml) treats approximately 200 gallons (757 liters). Quantity: 8oz (237 ml) Temperature Range: n/a Part Number: 004-300040 Safety Data Sheet (SDS) For use with:  Circulating Baths Refrigerated Circulating Baths Heating Circulating Baths Stainless Steel Open Bath Systems Polycarbonate Open Bath Systems Viscosity Bath Calibration Bath 75L Refrigerated Circulating Bath Coliform Bath General Purpose Water Baths LM Series Benchtop LS Series Benchtop MM Series Benchtop 6000 Series Chiller 3370 Liquid-to-Air Cooler 4100 Liquid-to-Liquid Cooler

    $65.00$49.00

Login

Forgot your password?

Don't have an account yet?
Create account