Extractor Accessories

36 products


  • Plastic End Caps for Tri-Clamp Parts - 2 Pack Shop All Categories BVV 1.5-inch

    Plastic End Caps for Tri-Clamp Parts - 2 Pack

    Plastic End Caps for Tri-Clamp/ Tri Clover Parts - 2 Pack These plastic end caps are for covering and protecting the ends of Tri-Clamp parts from damage or allowing the user to fill a column while capping off the other end and come in a pack of 2.

    $2.00 - $2.50

  • Sale -33% Gold Glycerin Filled Compound Gauge - Back Mount Shop All Categories BVV

    Gold Glycerin Filled Compound Gauge - Back Mount

    Gold Glycerin Filled Compound Gauge - Back Mount This compound gauge has a faux gold housing to add style to any system it is on and the pressure ranges from (-30)-0-(250psi) and has a 1/4" MNPT Stainless Steel back mount connection.

    $18.00$12.00

  • BVV Filter Dryer Shop All Categories BVV

    BVV™ Filter Dryer

    BVV Filter Dryer (Compare to Mastercool 69500-DR Filter Dryer) 1/4" In-Line Liquid filter drier model SDML-032 DM Core - 100% molecular sieves recommended for HFC's with POE and PAG oils.

    $14.00

  • 304 Stainless Steel Ball Bearings Packs 1/8-inch Diameter

    304 Stainless Steel Ball Bearings Packs

    304 Stainless Steel Ball Bearings - Packs 304 Stainless Steel Ball Bearings are a great addition to aiding in filtration because they increase the surface area inside a system and allow fats and lipids to cling to them. After a run is complete, they are easily cleanable. These ball bearings come pre-packaged in 140-gram packets and may have a quantity +/- the stated quantity per pack. Sizes Available: 1/8" Diameter - ~1150 Ball Bearings Per Pack 1/4" Diameter - ~150 Ball Bearings Per Pack 7/16" Diameter - ~25 Ball Bearings Per Pack

    $7.00 - $31.00

  • 304 Stainless Steel Wool - 2 Pack Shop All Categories BVV

    304 Stainless Steel Wool - 2 Pack

    304 Stainless Steel Wool   This 304 Grade Stainless Steel Wool is a great accessory for any extraction, condensing, or a filtration system. Stainless Steel Wool provides a vastly superior surface area compared to ball bearings and can be packed tighter to increase the surface area.   This 304 Stainless Steel Wool comes in a pack of two rolls that roughly measure 15" x 15". BVV™ recommends cleaning this filtration material with high purity alcohol before use to reduce contaminants. Specifications Material 304 Stainless Steel Wire Thickness 0.006" Dimensions 15" x 15"

    $17.00

  • 6" Stainless Steel Diamond Miner BVV

    6" Stainless Steel Diamond Miner

    6" Stainless Steel Diamond Miner This  6" Diamond Miner is used for crystallizing botanical extracts into live resin terpene-rich sauce. This Diamond Miner eliminates the need for glass jars and makes your degassing procedure safer. The premium extractor lid is pre-assembled and nitrogen tested for leaks to ensure the customer receives a leak and worry-free part to use on their extraction system. These valves come with a 1-year manufacturer warranty against defects and are custom-built. Remove the 6" x 2" splatter platter to easily remove diamonds from your sauce mix. Glycerin filled compound gauge gives you an easy readout of pressure inside the vessel. Specifications: 304 Grade Stainless Steel 500-700ml Optimal Capacity (725ml) Max Fill 1.5" sight glass 6" splatter platter High-pressure clamps 316 Stainless Steel Valve with 1/4" Flare Connection Temp Range -40 to 230C Compound Gauge (-30)-(150) MAWP: 100 psi

    $350.00 - $650.00

  • Stainless Steel (316) Mini Ball Valve - FxM NPT

    Stainless Steel (316) Mini Ball Valve - FxM NPT

    DuraChoice Stainless Steel (316) Mini Ball Valve - FxM NPT Stainless Steel Mini Ball Valves (or miniature ball valves) are made for use in confined spaces. With a pressure rating of 1,000 PSI (water,  oil or gas) and made out of SS 316, this line of valves outshines the rest of the mini ball valves available on this site.SS 316 (CF8M) body and ball - for extra strength and corrosion resistance Working on pressure of 1,000 PSI (WOG)Double seal system allows for flow can go in either directionHeavy duty Zinc Alloy handles (painted blue)Fast 1/4 turn open or closed operation Each valve individually tested for maximum safety Designation - Material Body - SS 316 (CF8M)Ball - SS 316 (CF8M)Bonnet - SS 316 (CF8M)Ball Seat - RPTFEValve Stem - SS 304/SS 316 Screw - SS 304 Lever - Aluminum Alloy O-Ring - NBR/Viton 

  • BVV™ Refrigerant Recovery Scale -150KG New Products BVV

    BVV™ Refrigerant Recovery Scale -150KG

    BVV™ Refrigerant Recovery Scale - 150KG This is the BVV™ Brand 150Kg (330LB) Refrigerant Recovery Scale which provides the user with the information of how much Refrigerant/Solvent is being filled into the tank or how much has been removed from the tank being weighed. What's in the box: Refrigerant Scale x 1 AAA Alkaline Battery x 5 User Manual x 1 Nylon Carrying Case x 1   Specifications Maximum Capacity 150kg (330lb) Resolution 5g(0.2oz) Accuracy 13" x 22" x 13-1/4" Battery 11.5" x 19.5" x 7-3/4" Battery Life 9-5/8" x 17.5" x 5" Operating Temp. 600w Storage Temp. 500w Temperature Fluctuation Range 110v/50Hz Relative Humidity No (Rubber Feet) Dimensions 10.7 x 10.7 x 2.9in (271 x 271 x 74mm)

    $185.00

  • BVV™ 2 Ton 304SS Puck Press Shop All Categories BVV

    BVV™ 2 Ton 304SS Puck Press

    BVV™ 2 Ton 304SS Puck Press This BVV™ 2 Ton 304SS Puck Press allows users to compress material into an easily manageable puck.   Specifications: 304 Stainless Steel Components (Excludes Jack) External Dimensions - 5" x 5" x 10.5" Internal Puck Mold Diameter - 2.75" Mold Height - 2.5" Weight - 16LBS    

    $285.00

  • 4" Stainless Steel Diamond Miner Shop All Categories BVV

    4" Stainless Steel Diamond Miner

    4" Stainless Steel Diamond Miner The 4" Diamond miner eliminates the need for glass jars and adds safety to your degassing procedure. It also gives you multiple viewing angles to see your diamond growth. Remove the 4" x 2" splatter platter to easily remove diamonds from your sauce mix. A glycerin filled compound gauge gives you easy readout of pressure inside the vessel. Specifications: 304 grade stainless steel 500ml - 750ml Optimal Capacity 1.5" sight glass 4" sight glass 4" splatter platter High pressure clamps 316 Stainless Steel Valve with 1/4" Flare Connection Temp Range -40 to 230C MAWP: 100 psi

    $450.00 - $710.00

  • Mini Stainless Steel Diamond Miners Shop All Categories BVV

    Mini Stainless Steel Diamond Miners

    Mini Stainless Steel Diamond Miners The Mini Diamond miner eliminates the need for glass jars and adds safety to your degassing procedure. It also gives you multiple viewing angles to see your diamond growth. A glycerin filled compound gauge gives you easy readout of pressure inside the vessel. Specifications: 304 grade stainless steel Stainless Steel Butterfly Ball Valve -40 to 230C In-Line Sight glass Compound Gauge High pressure clamps MAWP: 100 psi

    $150.00 - $225.00

  • Sale -23% Nai-Lok - Adjustable Pressure Relief Valve Shop All Categories Nai-Lok 10-250 PSIG

    Nai-Lok - Adjustable Pressure Relief Valve

    Nai-Lok - Adjustable Pressure Relief Valve. 1/4" MNPT Inlet x 1/4" FNPT Outlet made out of 316 Stainless Steel

    $110.00$85.00

  • 1/4" NPT Stainless Steel Thermowell Shop All Categories BVV 2.5"

    1/4" NPT Stainless Steel Thermowell

    1/4" NPT Stainless Steel Thermowell   These stainless steel thermowells are the perfect addition to an extraction system allowing the user to probe the internal temperate of a system component to know what temperature it is at. This thermowell feature 304 stainless steel and is 2.5" or 4" long with a 1/4" Male NPT threaded connect and a 1/4" female NPT threaded connection on the top of the hex head.

    $40.00 - $50.00

  • 1LB Inline CRC Kit Shop All Categories BVV B80

    1LB Inline CRC Kit

    1LB Inline CRC Kit   BVV's 1lb Inline CRC Kit can be utilized to adapt any of our 3" diameter 1lb material columns for inline adsorbent filtration. This kit includes a 3"x6" media column with a 300-gram media capacity and a filter stack including a 5 micron & 1 micron Dutch Weave Sintered Filter Discs. This 3" color remediation column is meant to be plumbed between the 3" 1lb material column and the existing hemispherical reducer of any of our 1lb closed loop hydrocarbon extractors.Assembly starts with placing the 1 micron sintered disk and gasket between the extracts hemispherical reducer and the included filter plate securing both with one of the included high-pressure clamps. Next, take the 5-micron sintered disk and the included ashless filter paper and rip around the circumference of the sintered disk, placing both atop the filter plate placing the sintered disc gasket and 3"x6" spool over top before securing both with the remaining high-pressure clamp. Since the spool secures the filter paper in place a filter plate ring is not required.  This Kit includes: 3"x6" Tri-clamp Spool (300 gram capacity) 3" V3 Filter Plate 3" 5 Micron Sintered Disk 3" 1 Micron Sintered Disk 2x 3" Buna-N Sintered Disc Gaskets 2x 3" High-pressure Clamp 110MM 25 Micron Ashless Filter Paper (100qty) Your choice of 1000g of UltraClear, B80, Perform 5000 or 500g of Chemtek W1,W2, or W3.   Sample Choices: Ultraclear: High-performance granular attapulgite B80: Naturally active attapulgite clay powder Perform 5000: Highly activated attapulgite clay for hard to bleach oils W1: Top-tier Acid activated bentonite clay perfect for preserving terpenes. W2: Natural bleaching clay that prevents terpene isomerization W3: Highly active adsorptive clay designed for difficult to bleach oils  

    $210.00

  • Extractor Dispensing Wand with Toggle Valve Shop All Categories BVV 1/4-inch Flare

    Extractor Dispensing Wand with Toggle Valve - USA SSP Valve

    Extractor Dispensing Wand with Toggle Valve This Dispersing Wand is used for dispensing out extracted material without having to lift a heavy collection base and is a lot more controllable when spreading it across a sheet. The valve is a 316L stainless steel compression fitting toggle valve with 3/8" JIC flare and 3/8" diameter x 7" long angled dispersing tube.

    $285.00

  • ASME-Code Fast-Acting Pressure-Relief Valve for Air, Silicone Seal, 1/4 NPT Shop All Categories BVV

    ASME-Code Fast-Acting Pressure-Relief Valve for Air, Silicone Seal, 1/4 NPT

    ASME-Code Fast-Acting Pressure-Relief Valve for Air, Silicone Seal, 1/4 NPT   Valve Function Pressure Relief For Use With Air, Inert Gas Activation Pressure Driven Inlet Pipe Size 1/4 Connection Type Pipe Pipe Connection Type Threaded Connection NPT Male Location Bottom Relief Port Connection Type Vent Relief Port Location Side Set Pressure Configuration Nonadjustable Temperature Range -15° to 250° F Valve Shape 90° Elbow Valve Body Shape Straight Overall Height Varies Material Body Brass Seal Silicone Test Mechanism Ring Valve Type Pop Safety Specifications Met ASME BPVC.VIII RoHS RoHS 3 (2015/863/EU) compliant with exemption 6(c) - Lead in copper alloy REACH Not Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 848140.0000 ECCN EAR99       To protect against damage in air lines, air receivers, compressor tanks, and other air-powered equipment, these valves spring fully open at the set pressure and remain open until the system pressure is restored below the set pressure. All meet ASME Code Section VIII for use with air and inert gas pressure vessels. They have a vented relief port to exhaust discharge directly. Silicone seals provide better leak protection than brass seals.  

  • BVV Compression End Caps New Products BVV 2"

    BVV Compression End Caps

    3/8" BVV Compression End Caps These End Caps come with a 3/8" Female Compression connection welded to the end cap with a sanitary weld. They allow the user to adapt and connect a 3/8" male tube stub connection to the lid.   Specifications Material 304 Stainless Steel Connection Type: Tri-Clamp 3/8" Female Compression Connection Standard: 3A Sizes Available: 1.5" 2" 3" 4" 6"  

    $40.00 - $120.00

  • Diamond Sauce Separator New Products BVV

    Diamond Sauce Separator for 1.9 ft³ Ovens and Larger

    BVV Diamond Sauce Separator The BVV diamond sauce separator is a good compliment to any diamond miner.  With this vessel you can easily strain and separate your diamonds from the sauce using the internal basket.  You can clean your diamonds like never before with less work.   DSS-9 12.25" Exact Height (Fits 1.9 ft³ Vacuum Ovens) 6" Deep Basket (100 micron mesh Dutch Weave) 3"x9" Main Body Spool DSS-12 15.25" Exact Height  (Fits larger than 1.9 ft³ Vacuum Ovens) 9" Deep Basket (100 micron mesh Dutch Weave) 3"x12" Main Body Spool Replacement Top Gasket around the basket can be found Here.   

    $160.00 - $180.00

  • Explosion Proof Platform Scales - 3000KG New Products BVV

    Explosion Proof Platform Scales - 3000KG

    These Explosion proof platform scales come with a ramp and can handle a maximum load of 3000KG. Scale measurement: 1200MM X 1200MM (47.24" x 47.24") Scale height: 110mm (4.33") Scale weight: 83KG (182.984LBS)   Note: This scale only measures in KG

    $1,850.00 - $2,250.00

  • Diamond Sauce Separator Basket New Products BVV

    Diamond Sauce Separator Basket Dutch Weave 100 Micron

    BVV Diamond Sauce Separator Baskets for your Diamond Sauce Separator sold "A la Carte" The 6"  long basket fit the BVV DSS-9 The 9" long basket fit the BVV DSS-12 The basket is a Dutch Weave all 304 Stainless Steel basket, and fits inside a 3" tri-clamp spool.  The lip perfectly fits the tri clamp flange and works with our Dutch Weave product line gaskets.  

    $21.00 - $26.00

  • 50L 304 Stainless Steel Carboy Receiving Vessel Shop All Categories BVV

    304 Stainless Steel Carboy Receiving Vessel

    304 Stainless Steel Carboy Receiving Vessel This stainless steel carboy receiving vessel is pre-built and comes with several different fittings for alcohol receiving and storage. It includes silicone gaskets, compound gauge, stainless steel ball valves, 1/4" flare connection, (2) 3/8" barb connections, (1) 3/8" barb connection to a dip tube and a polycarbonate sight glass for viewing inside of the vessel. For Storage and Vacuum Use Only Max  Pressure 10 Psi ONLY

    $850.00 - $1,000.00

  • Economy Recirculating Heater Kit Shop All Categories BVV

    Economy Recirculating Heater Kit

    Economy Recirculating Heater Kit The Economy Recirculating Heater Kit is designed to provide efficient heating and circulation at an affordable price. The kit includes a submersible water pump for fluid circulation, an LX or MX immersion heater, and all tubing and hose clamps needed to pair with your system. The tubing is 1/2" ID x 5/8" OD and the pump fitting is 1/2". The pump will circulate up to 594 GPH. Economy Recirculating Heater Kit Includes: Polyscience LX or MX Immersion Circulator EcoPlus Eco 633 Fixed Flow Submersible/Inline Pump 594 GPH 5 Gallon Aluminum Pot 10 Feet of 1/2" Silicone Tubing 10 Pack of Adjustable Stainless Steel Tubing Clamps

    $1,450.00

  • Digital Vacuum Chamber Gauge Upgrade Unclassified BVV

    Digital Vacuum Chamber Gauge Upgrade *Wireless

    Digital Vacuum Chamber Gauge Upgrade *Wireless After many requests, we have combined our infamous vacuum tight bulkhead with the power of a wireless vacuum gauge that can be a simple upgrade to ANY of our vacuum chamber products or resin traps.  For those seeking truly accurate readings at any altitude and wireless monitoring this is the ultimate gauge for any vacuum system!. *To install: All that is required is a 1/2" wrench to remove the original and replace the digital one.    The VGW-mini Wireless micron vacuum gauge measures vacuum via just one service port and with no loss of refrigerant. Its compact, robust and smart design support HVAC technicians with numerous intelligent features like the graphic display of measurement data in the Elitech Tools App. Its smart Bluetooth integration allows for data to be stored and evaluated reliably and efficiently, thus saving precious time and resources. Product Features High Accuracy The digital vacuum gauge achieves precise deep vacuum measurements down to single digit resolutions and provides notifications when the evacuation target is met. Smart APP Control Control your micron tester remotely and navigate through all measurement data via Smartphone or Tablet. Quickly and conveniently document your job, finalize your report and export - directly from the job site. Intelligent Judgement of H2O Status The vacuum meter automatically judges physical state of H2O by comparing ambient temperature and water saturation temperature corresponding to the vacuum in the system. Large, Easy-to-Read Display Continual digital readout of evacuation process can be viewed easily on the large, full-view LCD screen. Rechargeable Lithium Battery Built-in rechargeable lithium battery can work up to 20 hours per single full charge, saving troubles of frequent battery change.     Product Specifications Measuring Range: 0-19000 micron Operating Temperature: -4℉~140℉ (-20°C~60°C) Interface: 1/4 SAE Accuracy: 1~10,000 microns: ±10% of readings ±10 microns10,000~19,000 microns: ±20% of readings Resolution: 0-400 1 Micron400-3000 10 Micron3000-10000 100 Micron10000-19000 250 Micron Vacuum Units microns, mTorr, in/hg, Pa, Torr, KPa, mbar and psia Battery rechargeable lithium battery (1,000mAh) Overload 27.5 bar Certification CE

    $178.00

  • Compressor Head Complete, Stainless Fittings, Viton Unclassified BVV

    Upgraded TRS21 Compressor Head Complete, Stainless Fittings, Viton

    Upgraded TRS21 Compressor Head Complete, Stainless Fittings, Viton   Upgrade your TRS21 by purchasing a new Compressor Head with Viton O-rings for butane and propane gas compatibly and stainless steel fittings to meet FDA guidelines on handling of consumable products.  This head is assembled here in the USA and is a direct replacement for any TRS21 Compressor Head. 

    $180.00

  • Dk-Lok V63 Series 1/4" 10-250PSI Adjustable Pressure Relief Valve 316SS BVV

    Dk-Lok V63 Series 1/4" 10-250PSI Adjustable Pressure Relief Valve 316SS

    V63 Series 1/4" 10-250PSI Adjustable Pressure Relief Valve 316SS   DK-LOK® V63/66 series proportional relief valves provide a wide range of set pressures in order to protect your systems against over pressurization resulting in damage to system components.  These proportional relief valves open in direct relation to how quickly the system inlet pressure overcomes the set pressure of the spring.  They close in direct relation to how quickly the system inlet pressure drops below the spring set pressure.  We offer a variety of connection configurations and seal materials to match your system requirements. DK-LOK V63/66 Series Pressure Relief Valve Data Sheet 

    $297.00

  • BVV™ Stackable Diamond Miner V2 New Products BVV

    BVV™ Stackable Diamond Miner V2

    BVV™ Stackable Diamond Miner V2 The Stackable Diamond Miner V2 Diamond miner eliminates the need for glass jars and adds safety to your degassing procedure. Allowing you to see your Diamond growth through the top sight glass and by pulling up the Stackable Diamond Miner Tray once the process is completed. This diamond miner comes rack-mounted with a fully jacketed column and high-pressure clamps.

    $2,250.00

  • Mastercool Nitrogen Pressure Regulator Kit Unclassified 0

    Mastercool Nitrogen Pressure Regulator Kit

    Mastercool Nitrogen Pressure Regulator Kit   Product Description Mastercool’s new nitrogen regulator is specifically designed to meet the specifications of HVAC/R and automotive A/C systems. This single stage nitrogen regulator is used to test systems for leaks when they do not contain refrigerant. 1/4” SAE flare outlet port, with control valve, to keep pressure on the regulator at all times T-Handle for ease of pressure adjustment 63 mm (2 1/2”) gauges with guards High pressure gauge 4400 psig (300 bar) Low pressure gauge 1000 psig (70 bar)  

    $169.00

  • V61 Series Vent Relief Valve New Products DK-LOK 1/4" FJIC ADAPTER

    V61 Series Vent Relief Valve

    Features: Precise cracking pressure with high reliability Keep the sealing to 95-98% of Set Pressure at least Reliable Reseal performance Tamper proof design 316 Stainless Steel NBR Seal Material 1/4" MNPT Connection or 1/4" JIC Swivel Connection Pressure Range - 0.03 to 1.03 bar (0.5 to 15 PSI)  Temperature Range: -195 to 204C (-45 to 400F)   Design and Application: V61 Series Vent relief valves is designed to vent out the excess pressure from the line automatically to keep the required line pressure safely when the line pressure is exceeded over the limitation unusually. These valves can be used in the case that the working fluid is not harmful when vented out. The level of cracking pressure should be set by adjusting the force of the spring in the valve before this valve is installed in the system.  Installation and Operation: This valve should be positioned perpendicularly to the direction of fluid flow in the line and that position should be considered and the vented fluid should be not directed to the personnel operating and the parts that has any influences on that. The line system should be run to check the performance of the valve after the personnel operating move to the safety zone. Because this valve is opened automatically when the excess of the required Line pressure.

    $20.00 - $25.00

  • 50L 304 Stainless Steel Carboy BVV

    304 Stainless Steel Carboy

    304 Stainless Steel Carboy This 304 stainless steel carboy is a very durable upgrade from plastic carboy's and allows it to be cleaned and sterilized much better. This unit comes with (2) 1/4" FNPT ports and (1) 6" Tri-Clamp top port and heavy-duty welded handles. For Storage and Vacuum Use Only Max  Pressure 10 Psi ONLY (Note: This unit comes bare and does not include any fittings.)

    $600.00 - $900.00

  • ASME 250 PSI Brass Safety Valve - 1/2" MNPT Shop All Categories BVV

    ASME 250 PSI Brass Safety Valve - 1/2" MNPT

    ASME 250 PSI Brass Safety Valve - 1/2" MNPT Model “SB” ASME safety valve is a high capacity safety valve. Unique O-ring seal ensures valve is bubble-tight to within 10% of set pressure. Set pressure tolerance is +/-3%. SB50 Outline Drawing SB Flow Charts Specifications Construction: Brass Stainless Steel Springs FKM O-Ring Seal Set Pressure 250 PSI Max Temp. 250ºF

    $60.00

  • Safety Tools - The Extractor's Kit (AlCu) New Products BVV

    Safety Tools - The Extractor's Kit (AlCu)

    The Extractor’s Safety Tool Kit These tools are forged out of 100% Aluminum Bronze (GB EX IIB). The material hardness is 20-30 HRC, which is still very durable for normal day to day work. They will not generate a spark when knocked against or dropped on steel parts. We have optimized the kit to only include what you will need on our equipment. This kit includes: -Combination Wrenches: 5/8” ¾” -Double End Wrenches: 19/17 mm 17/14 mm 14/10 mm -200mm Adjustable Wrench -250mm Adjustable Wrench -3/8” Drive Socket Wrench -Sockets:  ½ 14mm 5/8 11/16 ¾ -Allen Keys: 3/16  ¼ -Phillips #2 Screwdriver-6mm Flathead Screwdriver-500g Cross-Peen Hammer

    $700.00

  • Best Value Vacs Pro Series Manifold Shop All Categories 0 Without Hoses

    Best Value Vacs Pro Series Manifold

    Pro Series Manifold with Charging Hose Set R290/R600 This manifold is designed for R290 and R600 Propane and Butane solvents for closed loop extraction systems and for nitrogen assistance to push solvent through the system. When used in an active closed loop recovery and circulation system, the manifold allows the user to control the solvent input via the manifold through the gauges and allows you to monitor the pressure and vacuum of the system while it is running.  Specifications: Aluminum Block Body 1/4" SAE Brass Fittings 60mm Gauges Refrigerants: R1270/R290/R600a BAR, PSI, Celsius Temp. Ratings: 100C Pressure Ratings: 800PSI High Side, 500PSI Low Side Includes 3 Multi-Colored Charging Hoses.

    $38.00 - $45.00

  • 5/16 USS Flat Washer Shop All Categories BVV

    5/16 USS Flat Washer

    5/16 USS Flat Washer 5/16 replacement washer for vacuum chamber bulkheads made out of metal.

    $0.50

  • MRD-WFE-RACK Shop All Categories BVV

    WFE Rack 8

     Extruded Aluminum Framing Rack     This rack is constructed of 1.5" extruded aluminum framing. This framing has slots that can be used for a wide variety of mounting hardware. This large rack is a good size to contain a wiped film or similar distillation equipment, along with three laboratory heaters/chillers stacked on the right side. The rack has six swivel casters for smooth transport with locking wheels in the corners.    NOTE: This rack ships unassembled. Allow 6 hours for assembly

    $3,900.00

  • Spare Gasket - CO2 Extractor Shop All Categories BVV

    Spare Gasket - CO2 Extractor

    Spare Gasket - CO2 Extractor Spare Gasket for CO2 Extractor.

    $25.00 - $30.00

  • Arometrix Extraction Finder (C1D1-Compliant) Shop All Categories Arometrix

    Arometrix Extraction Finder (C1D1-Compliant)

     Arometrix Extraction Finder  (C1D1-Compliant) The Arometrix EXTRACTION FINDER is a real-time molecular monitoring system that enables extraction technicians to maximize extraction efficiency on every run. Traditionally, the extraction process has been more of an art, where technicians rely on intuition, extract color, past experience, and other subjective techniques to change extraction parameters. This is an inefficient way to develop, optimize, or validate an extraction process. Extraction laboratory technicians and managers can utilize this real-time molecular data to inform key process decisions, such as determining when the initial extraction is over. With the EXTRACTION FINDER, extraction technicians can scientifically track solvent saturation of active molecules, as well as undesirable compounds, to continuously improve extraction efficiency. Key Applications: Hydrocarbon Extraction Primary sensor installation location:  Right after the material column Primary purpose:  Tracking solvent saturation to determine when the extraction process (wash) is finished Secondary sensor installation location:  Right after the filtration / CRC column Secondary purpose:  Tracking the separation of undesirable compounds from the solution to ensure clean output material and maintain QA/QC Ethanol Extraction Primary sensor installation location: Right after the centrifuge / wash basin Primary purpose: Tracking solvent saturation to determine wash completion Solventless Extraction Primary sensor installation location: Right after the agitation Primary purpose: Reduction of Chlorophyll and Lipids in output Clean in Place (CIP) for Any Extractor Primary sensor installation location: Anywhere Primary purpose: Identifying leftover material in the extractor during a cleaning in place (CIP) run in between batches and ensuring equipment is clean for cGMP practices   DON’T JUST DO YOUR PROCESS. KNOW YOUR PROCESS.   Features & Details Extraction Finder Sensor Standard 1.5″ tri-clamp fittings for easy installation Spectroscopic technology for instantaneous analytics Intrinsically-safe sensor electronics fully enclosed from all fluid Rated to 350 psi / ASME-compliant C1D1-compliant   Arometrix Monitor Collects and displays real-time molecular data in-line throughout the process High-quality, high-resolution touch screen Compatible with all Arometrix sensors   Key Software Features Molecular Viewing – View up to 3 molecules simultaneously via two different graphing options; select from a list of molecules Intensity Values – Observe numeric molecular intensity levels that correlate with potency Data Logging – Record run data for traceability in our data review app Software Updates – Upgrade to new software releases easily from the field   Powered by fluorescence spectroscopy The AROMETRIX technology utilizes a principle known as fluorescence spectroscopy, a branch of science concerned with measuring molecules based on how they interact with light. The technology uses a spectrum of wavelengths over time to determine the relative purity of oils flowing through a glass condenser or sight glass. This technique paves the way for precision and repeatability, which will yield a more consistent product over time. Product Details Included in this package: Arometrix Monitor Extraction Finder Sensor Power Supply, 10′ Sensor Cable, 30′ User Manual Quick Start Guide Warranty Card   Compliance: PSI Certified in all 50 states ASME-U NFPA 58 LPG Class 1, Division 1 Compliant Class 1, Division 2 Compliant Read our press release to learn more about our certifications     Download Manual PDF 

    $8,678.00 - $9,580.00

Login

Forgot your password?

Don't have an account yet?
Create account