Irrigation

Blue TubingUse our sturdy blue tubing, which is FDA-approved and BPA-free, for your irrigation systems and tanks, and to complete your own hydroponic systems. The material is Polyurethane which is easy to cut to size, but will remain strong and reliable. Keep a roll on hand for instant access to repairs. Extremely resistant to weathering, tearing, impact, radiation, and abrasion Transparent, flexible, resilient, tough Free of DEHP, phthalates, BPA and conflict minerals RoHS compliant Can be heat sealed, coiled, fabricated, or bonded   Inside Diameter Outside Diameter .5" .64" 30 PSI max operating pressure at 70 degrees. *FDA approved and Food safe

Read more less

fill/drain fitting. This is the fitting that is commonly used to transfer nutrient solution between the flood table and the reservoir in flood & drain hydroponic systems via tubing and a pump.  

Read more less

Use our sturdy black vinyl tubing, which is FDA-approved and BPA-free, for your irrigation systems and tanks, and to complete your own hydroponic systems. The material is easy to cut to size, but will remain strong and reliable. Choose from six different 100-foot sizes, each in a convenient dispenser pack. Keep a roll on hand for instant access to repairs. Size Inside Diameter Outside Diameter 1/4" .17" .29" 1/2" .5" .65" 3/4" .75" .938" 1" 1" 1.25" 3/16" .19" .31" 5/8" .635" .775"

Read more less

10 pieces per pack

Read more less

Use our sturdy black vinyl tubing, which is FDA-approved and BPA-free, for your irrigation systems and tanks, and to complete your own hydroponic systems. The material is easy to cut to size, but will remain strong and reliable.  30 PSI max operating pressure at 70 degrees. *FDA approved and Food safe   sku Inside Diameter Outside Diameter HGTB50GF .5" .64" HGTB50-50 0.5" 0.64" HGTB100-25 1" 1.25" HGTB100-50 1" 1.25" HGTB75GF .75" .938" HGTB75-50 0.75" 0.938"

Read more less

Use to close the end line

Read more less

10 pieces per pack

Read more less

10 pieces per pack

Read more less

PCS P-50 Pot Irrigation Ring  Predetermined geometric spray points provide precise even watering Developed using advanced computational fluid dynamics Built-in depth guides for easy setup  Ultrasonically welded construction  Designed for complete automation on small or large commercial scale Made from medical grade abs plastic Precision spray irrigation™ technology

Read more less

Contains all necessary accessory parts to the PCS_P50_pot packaged in one box Liner – Consumable fabric planter liner for use in the PCS P50 system Grid – Creates the patented air void at the bottom of the PCS P50 system Lock – Locks the base to the PCS P50 system Ring - The ultrasonically welded PCS spray ring for the PCS P50 system Base – Elevates the PCS_P50_pot from the ground and allows use of both drain lines and top feed irrigation

Read more less

Using a timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features 1 second on/off Up to 8 on/off cycles per day Excellent for hydroponic systems 15 amp UL-listed FOR MORE THAN 8 ON/OFF CYCLES PER DAY, USE APCTART 1 minute on/off Up to 8 on/off cycles per day Excellent for hydroponic systems 15 amp maximum load UL-listed for safety

Read more less

Autopilot Advanced 24hr Recycling Timer Product Details The APCTART2 is a cycle timer controller with day and night detection. It works to control any application requiring a device to be turned on and off at precise intervals. This timer has a wide range of uses including controlling hydroponic pumps, CO2 injection, turning on and off exhaust fans, misters and more.The cycle timer is adjustable for operation during the day, during the night, or all of the time (24 hours). We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped. Controls 120V pumps, fans, and more on a periodic repeat cycle  Adjustable "ON" duration spans from 1 second to 60 minutes  Adjustable "OFF" duration spans from 1 minute to 14 hours  Built-in photocell Functions during the day, during the night, or 24 hours  120v, 15 amps max

Read more less

 More effective irrigation of all types of pots/containers in all growing mediums. Drip emitters and stakes only provide a single point of irrigation making it hard for water/nutrient solution to evenly saturate a container. The water ring has 54 perfectly positioned pores to evenly irrigate containers eliminating dry pockets of growing medium.  Kit contains 3 removable stakes to keep water rings in place around each plant. The water ring can also be used without the stakes if desired. The water ring has a 1 inch gap on one end to allow it to be placed around large plants without damaging the stalks.  Can be used indoors or out in soil or hydroponics. Durable construction allows for years of use. Can be easily cleaned between growing cycles.  Create your own flexible irrigation kits easily and cheaply with any ½ inch I.D. tubing and ½ inch fittings (not included). Please note that adding ½ inch ball valves may be necessary to create an even flow to all water rings in large installations.

Read more less

Replacement spray head for EZ-Clone systems.

Read more less

The FloraFlexTM FloraCapTM is a revolutionary tool for top feeding that also helps eliminate algae. If cared for properly you can get multiple uses out of this tool. Place the Single Use FloraCapTM on top of your 6 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with built in holes for tubing. Each cap features strategically designed slots that deliver water and nutrients to the medium and blocks light while allowing air, water and nutrients to your plant. The FloraCapTM covers the top of the media allowing the root zones to dry at a more consistent rate and delivering the necessary oxygen your plants need to thrive. Algae disappears, healthy roots fill the medium, and blossoms multiply. The FloraCapTM was designed with the vegetative state in mind but has proven a worthy tool for the avid top feeder throughout the flowering stage as well.   Features Compatible with all 6 inch rockwool cubes Automate your feed by inserting Tubing (1/4 inch OD) into center holes. Strategically designed slots on both top and bottom folding parts. Carefully clean for reuse Recyclable Stackable BPA and lead-free plastic   Benefits Eliminate Algae Save up to 60% of your water, nutrients, and time!  Automated Hand Feed Directs all water and nutrients to your plant No more tedious counts, simply fill cap Flexible design. Easily take tool on and off plant Block light. Roots use entire medium Allows medium to dry evenly Compatible with all 6 inch rockwool cubes Strategically designed slots on both top and bottom folding parts. BPA and lead-free plastic Stackable Recyclable

Read more less

Quick Disconnect (GHP TO NPT): This tool easily connects your Flora Valve to your FloraFlex™ Bubbler. Eliminates the need for using Teflon Tape during manifold assembly. Allows you to effortlessly disconnect the bubbler for cleaning purposes.  3/4” Garden hose connection on one side and standard 1/2” thread that connects to Flora Flex Bubblers on the other. No threading required Leak free design Rubber grip for easy use ABS

Read more less

The FloraFlex® Matrix System is a patent-pending, first-of-its-kind top-feeding wicking system that provides the most even way to deliver water and nutrients to your potted plants. It can be used with pots ranging from 7.5"-18" diameters. You will need a Matrix unit, the same size Matrix Pad (optional), and the correlating Matrix Circulator. In the Matrix System water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Wicking Pad. There are eight slices to the pie, and each section is fed the same amount, going through the maze for even distribution. The Matrix pad is a capillary mat used for wicking. The Matrix is reusable and can sit on top of or fit into your pot, just be sure all surfaces are touching.The system blocks light and keeps the top of your medium moist for a more even dry down. There are holes on the side to allow bamboo sticks for stabilization.   Choose your Matrix by your pot’s diameter:   7.5"-9" 9"-10.5" 10.5"-12 12.5"-14.5" 15.5"-18" Place the Matrix Pad on the surface of your plant, the Matrix Unit on top of it, press down, fit the Circulator into the center holes, and connect your 1/4" OD tubing to the Circulator.   Now let your plants enjoy the benefits of a top-feeding wicking system.

Read more less

The Matrix Pad is a lightweight non-woven capillary mat placed between the Matrix and the medium. Traditionally capillary pads are placed underneath plants, however FloraFlex has designed the Matrix Pad to absorb water and wick to the top of the medium, delivering water and nutrients evenly. Place the Matrix Pad on the surface of your plant, the Matrix unit on top of it, press down, fit the Circulator into the center holes, and connect your 1/4" OD tubing to the Circulator. Now let your plants enjoy the benefits of a top-feeding wicking system.

Read more less

MULTI FLOW BUBBLER: An 8-outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. Available with or without Flow Inserts. The Open Flow Bubbler has no pressure regulation. The Multi Flow Bubbler comes with 4 color-coordinated interchangeable inserts: 2 GPH (YELLOW), 6 GPH (BLACK), 10 GPH (RED), and 20 GPH (BLUE).  Multi Flow - 4 color-coordinated interchangeable quick loading flow inserts at 2, 6, 10, and 20 GPH so you can find your desired flow rate 1/2” inlet which seamlessly screws into our Quick Disconnect without threading 8 barbed ports that connect to 1/4" OD Tubing Rubber grip on top for easy use ABS   QUICK DISCONNECT PIPE SYSTEM: an eight outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex™ manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products:  Flora Pipe Fitting (T 1”) Flora Valve Quick Disconnect  Multi Flow Bubbler

Read more less

OPEN/MULTI FLOW BUBBLER: An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. Available with or without Flow Inserts. The Open Flow Bubbler has no pressure regulation. Open Flow - Completely gutted inside to allow maximum pressure while still evenly distributing water 1/2” inlet which seamlessly screws into our Quick Disconnect without threading 8 barbed ports that connect to 1/4” OD Tubing Rubber grip on top for easy use ABS   QUICK DISCONNECT PIPE SYSTEM: an eight outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex™ manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products:  Flora Pipe Fitting (elbow 3/4”) Flora Valve Quick Disconnect  Multi Flow Bubbler

Read more less

The FloraFlexTM Tubing is a flexible premium vinyl, food grade hose. At 1/4" OD, our Tubing fits perfectly with ALL FloraFlexTM tools. Color coordinate and automate!  Features 100 feet in length 1/4 inch OD 3/16 inch ID Flexible premium vinyl FloraFlexTM Green FloraFlexTM Logo printed on the tubing   Benefits Used to automate all FloraFlexTM tools   Includes (1) 100' 1/4" OD Tubing 100 feet in length 1/4 inch OD 3/16 inch ID Flexible premium vinyl FloraFlexTM Green

Read more less

The Gardena Smart Flow Water Meter measures water usage daily, monthly, by season, or yearly. The LCD screen clearly displays information with measurements in liters or gallons. Save money and reduce waste! For use on hose-end products or at the water supply.Also included: Tap connector Faucet end connector Cell battery (CR2032)

Read more less

For the Dutch Leach tray.

Read more less

  Angled stakes hold 1/4" tubing securely in place in a way that virtually eliminates kinks and clogs. The angle of the stake works with the natural curve of rubber tubing. Tubing can become crimped when forced to make a 90-degree turn. By using a 60-degree angle, these obstructions can be avoided. These 60-degree angled stakes provide smoother water delivery from the attached tubing than other stakes. Stops mineral deposits from forming where the tubing connects to the stake  Prevents kinking of tubing

Read more less

Mother Nature waters from the top, and so do these commercial quality drip stakes. By using these, you can run a top watering system that is virtually clog-free. Sold in packs of 100 Top drip stake Can prevent salt build up Virtually clog-free

Read more less

Durable plastic construction won't leak or dent. Features 9-liter capacity, easy-to-read U.S. and metric markings, two comfortable ergonomic handles, and detachable rose for finer shower. Durable plastic construction won't leak or dent Easy to read U.S. and metric markings

Read more less

The Hydrofarm Electronic Water Timer makes watering your plants a breeze. This single-station analog timer attaches directly to your garden hose and automatically controls sprinklers, drip systems or soaker systems. It features two simple dials that allow gardeners to set the frequency of watering from 1 hour to 1 week, and the run time from 1 minute to 2 hours. This timer is easy to use and requires no wiring. Just attach it to your hose, set it, and forget it. Easy to use Suitable for all garden watering systems No wiring required Set watering frequency from 1 hour to 1 week Run time can be set from 1 minute to 2 hours Battery powered (requires 2 AAA batteries—not included)

Read more less

It is widely accepted that talking to your plants is great for their health. If they could speak to you, what would they say? Probably that they're being over-watered. Meet your garden's wants and needs with the Save A Drop Meter. Over-hydrating plants and shrubs can diminish plant health. Use the easy to read meter to measure how much water is flowing out of the hose. While in use, it calculates both accumulative watering volume and singular waterings, the amount of fluid used in between when you start and stop the hose. Take "guesstimates" out of the equation when watering your lawn. Attach the gauge to your sprinkler and know when the time is right to turn your hose on and off. Being aware of water consumption benefits your home, garden, greenhouse, and the planet. The Save A Drop Meter is an important tool to use when keeping your home happy and healthy.   Features Prevents over-watering Easy to read LCD display Calculates both single-use and total water consumption Accurately measures to 1/10th of a gallon Rugged waterproof housing

Read more less

Double Barbed straight Connector .25in 50-pack  1/4" Barbed Connector

Read more less

Double Barbed Elbow 1/4 inch, pack of 50  1/4" Barbed Elbow

Read more less

1/4" Barbed Tee connector, pack of 50 1/4" Barbed Tee

Read more less

  Premium Grade Drip Watering Tubing Flexible in cool temperatures Strong in the hot sun Can be left out year round, buried, on the surface in any weather. No cracking or UV deterioration

Read more less

 4" Support Stakes for 1/4" tubing. Use to hold tubing with drippers in position next to the plants to be watered.  

Read more less

6" Heavy Duty Support Stakes, pack of 50  Heavy duty plastic stakes used to hold 1/4" tubing in place.

Read more less

Raindrip Adjustable Eight-Outlet Bubbler   Raindrip Hydro-Port® Adjustable Eight-Outlet Bubbler, up to 30 GPH Per Outlet, 1/2 in. FPT Inlet   Turn an underground sprinkler system into a low-flow drip system that waters eight individual plants with the Hydro-Port® Adjustable Eight Outlet Bubbler. The emitter has a 1/2 in. FPT inlet which connects to a 1/2 in. MPT sprinkler riser and eight out-letting ports. Attach 1/4 in. supply tubing to each port to deliver precise watering. Each outlet is fully adjustable from 0-30 GPH, and has a swivel arm to position tubing exactly where you want it. Ideal for garden areas and perimeter landscaping. Best used with a pressure regulator to lower water pressure and keep tubing in place. Made of ABS treated with UV inhibitors.  Drip irrigation systems are easy to customize, install, and operate. With a non-pressure compensating emitter, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. Made of ABS plastic treated with UV inhibitors

Read more less

Ideal for light soil (sandy). For landscape and container plants. Maintains a constant flow rate even on hillsides or long circuits.

Read more less