Shop Consumables
Huber DW-Therm HT P20.340.32 Heat transfer fluid 20 to 340 °C
Huber DW-Therm HT 20 to 340 °C Heat transfer fluid Huber heat transfer fluids are recommended for many temperature control applications because they have the best possible thermodynamic and environmental characteristics. Safe reliable operation relies on compliance with safety standards to ensure optimal results. DW-Therm HT is a mixture of partially hydrogenated naphthalenes. It is especially suited for high temperature applications using hydraulically sealed thermostats. Please note: Valid only for Unistats Safety Data sheet Advantage: broad working range from 20 °C up to 340 °C (hydraulically sealed systems) Long lifetime at high temperatures under inert atmosphere: 3 -4 years Good thermal properties for heat transfer High thermo-oxiation stability Properties Working temperature°C 20 to 340 Flash Point °C 190 Flash Point °C approx. 218 Viscosity mm2/s (kinematic at 25 °C) 32 Density g/cm3,(at 20 °C) 1,043 Pour Point °C -30 Ignition temperature °C 385 Colour orange, clear Thermal expansion coefficient 10-5/K not specified Heat conductivity W/(m·K) at 30 °C 0,130 Material incompatibility not specified
$835.00 - $1,440.00
Media Bros CRY™ MEDIUM FLOW
CRY™ MEDIUM FLOW (CRY-M™) FILTER MEDIA FOR BHO EXTRACTION (NON-REACTIVE) This medium flow non-reactive variant of CRY allows operators to increase operating pressures and surface area for a more fine-tuned process. PH 7 DESCRIPTION CRY™ Medium Flow (CRY-M™) is a finer version of CRY™ designed for systems operating at slightly higher PSIs that still need non-reactive high flow outputs and a little extra selectivity. It is not quite powder, but a much finer grain than CRY. The smaller granule size helps prevent channeling that can sometimes occur at higher PSIs. We recommend CRY-M™ for operators who want the same effect as CRY™ but are running at higher pressures or systems with size limitations. For extracts that require additional remediation beyond CRX-M™, CRY-M™ offers a superior polish, effectively addressing color, fats, and lipids. Opt for CRY-M when aiming for effortlessly reproducible results with older biomass. Suggested use: 150–250g per lb. of biomass Packaged in: 1.5 kg pouch, 5 gallon bucket, and 100 kg drum TECHNICAL SPECS Solvent Type Hydrocarbon Color Remediation Level Moderately Heavy/High Pesticide Remediation Level Medium Selectivity/Polarity Level Moderately Selective/Medium Polarity Heavy Metal Remediation Yes Moisture Remediation Level Moderate Fats/Lipids/Waxes Level Medium Crystal Growth Fast Depth Filtration No Flow Rate Moderate Flow pH Level Neutral (pH 7) Best For Slightly Aged Biomass, Medium Quality Suitable for Reruns Yes Distillation Clean-up Moderate Scrub SDS
$30.00 - $1,600.00
CHEMTEK W5 Neutral Bleaching Clay
CHEMTEK W5 Neutral Bleaching Clay W5 is a neutral bleaching clay specialized for the removal of heavy metals. While most sorbents will remove heavy metals, the acids involved in the activation process could cause desorption. By neutralizing the clay processors can take advantage of the increased surface area without any risk of desorption. W5 SDS W5 Technical Data Sheet
$40.00 - $1,800.00
CannaClean SC-1 Industrial Resin Cleaner Concentrate
CannaClean SC-1 Full Concentrate Undiluted The Preferred Cleaner @ BVV! Designed to clean all sticky resin messes. This industrial cleaner can be used to clean worksurfaces, ovens, handles, doors, intricate glassware, extractor parts, scissors, automated machines and any instruments or tools used that comes into contact with the sticky resins we all know. What sets this cleaner apart is the application. D'limonene has been the go to for labs, but it always leaves behind the oily residue since its a pure oil based terpene. CannaClean SC-1 leaves NO residue behind on any surface. Making this a one step cleanup product! Use as is or dilute with water (we recommend no more than 50% dilution) Apply with spray or cloth. *SC1-Wipes are fully concentrated wipes ready for use! 75 wipes per bottle. CannaClean SC-1 Safety Data Sheet (SDS) CannaClean SC-1 Material Compliance Statement
$15.00 - $300.00
High Purity Paraffin Lamp Oil - Smokeless, Clean Burring - Kosher - 99.5% Pure
Paraffin Lamp Oil 99.5% Pure - Kosher BVV's 99.5% High Purity Lamp oil is great for indoor and outdoor use. It is a clear, water-white, oily liquid with a low viscosity, and will not thicken with age. Our lamp oil has an extremely low sulfur and nitrogen content. It's a highly refined mineral oil that comes from petroleum and is stripped of its odors. The shelf-life of paraffin lamp oil will last indefinitely if stored in a sealed container. Paraffin oil is a fuel source used to power oil lamps, providing light in a situation where electricity is unavailable, making it a valuable item to stockpile for emergency situations due to its ability to provide light without needing batteries or power. If you're a prepper looking for a fuel source that won't sour with age, we recommended our paraffin lamp oil. BVV® Paraffin Lamp Oil Certificate of Analysis COA BVV® Parafin Lamp Oil Safety Data Sheet
$14.27 - $3,509.00
Soya Peptone Powder for Mushrooms Mycology
Soya Peptone Powder Bacteriological GradeBest for Vigorous Mycelia Growth Our Agar Powder is extracted from Red Seaweed. Our agar is a complex polysaccharide and is a top choice for mycology cultures. This superfine agar dissolves quickly and has a high gel strength making it an excellent choice for a variety of applications an petri dishes. STORAGE: Cool dry conditions, sealed original package Mix: Mix: 1 gram per. 500ml pH: 6.41 ODOR: Soy bean protein smell. SOLUBILITY: Soluble in water. TOTAL NITROGEN: 10.45% W/W TOTAL ALPHA AMINO NITROGEN: 3.09% W/W TOTAL PLATE COUNT: 1098 CFU/gm YEAST AND MOLDS:: 200CFU/gm E.COLI: NEGATIVE SALMONELLA: NEGATIVE STA{HYLOCOCCUS AUREUS: NEGATIVE PSEUDOMONAS AERUGINOSA: NEGATIVE SHELFLIFE: 4 years. CAS# 91079-46-8 Directions for Use: 1. Mix 1g of soya peptone powder per 500ml of liquid culture or agar recipe for vigorous mycelia growth. 2. Boil and stir until powder is fully dissolved. Sterilize the mixture for 45min @15psi 250°F (121°C) in a pressure cooker or autoclave.
$11.90 - $59.50
CHEMTEK D-Wax
D-Wax is a silica with high adsorption capacity and strong affinity for phospholipids, trace metals, and soaps. It contains 50% water and citric acid to remove both hydratable and non hydratable phosphatides. D-Wax SDS
$80.00 - $460.00
Gas Plug Clear Mix #10 Extra Strength
This Extra Strength GASPLUG Clear Mix is a special mixture of minerals that electromagnetically affixes themselves to plant compounds and pigment, removing the bad stuff from extracted oil, and purifying your oil. Gas Plug Clear Mix #10 Extra Strength SDS CONTAINS: CARBON, SILICA, MAGNESIUM. * DISCLAIMER * You should only lose yield from your oil in correspondence to the amount of residual plant compound removed. If you lose more than 20% yield from gold oil, you have done it wrong. It is not uncommon to have a 50-60% cannabinoid crude oil that loses 30-40% yield under refinement. The amount of yield loss should be proportionate to the overall potency.
$100.00 - $500.00
Huber MinOil P20.190.40, Heat transfer fluid 20 to 190 °C
Huber MinOil P20.190.40, Heat transfer fluid 20 to 190 °C P20.190.40 is a high quality mineral oil based heat transfer fluid. It meets the technical safety requirements and tests according to DIN 4754 as well as the recommendations of VDI 3033 (Construction, operation and maintenance of heat transfer systems). Advantages: very good oxidation stability high thermal stability good viscosity-temperature characteristics low tendency to coke extended oil change interval Safety Data Sheet Properties Working temperature °C 20°C…190°C Flash Point °C 190 Fire Point °C not Specified Viscosity mm2/s (kinematic at 25 °C) 40 Density g/cm3 0,86 Pour Point °C > 300 Ignition temperature °C > 300 Colour light yellow Thermal expansion coefficient 10-5/K not Specified Heat conductivity W/(m·K) at 25 °C 0,135 Material incompatibility Not Specified
$460.00 - $1,370.00
Polyethylene Glycol 400 - PEG 400
Polyethylene Glycol 400 Polyethylene glycol 400 has an average molecular weight of 400. It is a clear, viscous liquid at room temperature. APPLICATIONS • Chemical Intermediate• Plasticizer• In cosmetics for preparation of ointments and lotions.• As a mold release agent and lubricant for both natural and synthetic products. Physical Properties Flash point, PMCC, °F 390 Flash point, PMCC, °C 199 Refractive index, 25°C 1.463 Density, g/ml, 20°C (68°F) 1.1254 Weight, lbs/US gal, 20°C (68°F) 9.39 Freezing Range, °F 39-46 Freezing Range, °C 4-8 Viscosity, kinematic cSt at 25°C (77°F) 84 cSt at 98.9°C (210°F) 7.3 Chemical Properties Molecular Weight (range) 380-420 Average number of EO units 8.7 Water Solubility Soluble Potassium acetate, wt% 0.02-0.2 pH, 5% aqueous solution 4.5-7.0 Water, wt% 0.5 max. Color, Pt-Co 50 max. Hydroxyl number, mg KOH/g 267-295 Appearance, 20°C Clear The expiration date is 3 years from the date of manufacture and when the glycol is kept below 100F and out of direct sunlight.
$30.00 - $5,400.00
Inland 70 Ultra Vacuum Pump Oil (Edwards Ultragrade 70)
Inland 70 Ultra Vacuum Pump Oil This is oil is a direct replacement for Edwards Ultragrade 70 oil. Specifications Inland 70 Ultra Vapor Pressure @25°C 1x10^-7 torr Viscosity @ 40°C 72 cSt Pour Point: -10°C Flash Point: 249°C Density: 0.86 g/ml Color: Clear Inland 70 Ultra Safety Data Sheet PDF
$24.00 - $1,275.00
Malt Extract Powder for Mushrooms Mycology
Malt Extract Powder Our Agar Powder is extracted from Red Seaweed. Our agar is a complex polysaccharide and is a top choice for mycology cultures. This superfine agar dissolves quickly and has a high gel strength making it an excellent choice for a variety of applications an petri dishes. STORAGE: Cool dry conditions, sealed original package Mix: Mix: 10 gram per. 500ml pH: 5.88 TASTE & ODOR: Sweet, malty in taste and smell. SOLUBILITY: Soluble in water. CLARITY IN WATER: Clear TOTAL PROTEIN CONTENT: 5.19% TOTAL CARBOHYDRATE: 72.98% W/W YEAST AND MOLDS:: 150CFU/gm E.COLI: NEGATIVE SALMONELLA: NEGATIVE STA{HYLOCOCCUS AUREUS: NEGATIVE SHELFLIFE: 4 years GEL STRENGTH(1.5%) 900 gm/cm Minimum CAS# N/A Directions for Use: Mix 10g of malt extract powder per 500ml of distilled water, as a nutritional additive in your agar or liquid culture formulation. Boil and stir until powder is fully dissolved. Sterilize the mixture for 45min @15psi 250°F (121°C) in a pressure cooker or autoclave. Allow mixture to cool to approximately 122°F (50°C) *To avoid excessive condensation
$11.90 - $59.50
Julabo C5 Thermal Bath Fluid - 10 Liters
Julabo C5 Thermal Bath Fluid JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for best results in temperature control. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are specifically matched with each JULABO temperature control unit. C5 Thermal Bath Fluid SDS C5 Thermal Bath Fluid Product Data Sheet JULABO Thermal bath fluids have been carefully selected and are optimized for maximum performance with JULABO instruments. Benefits Low toxicity Low viscosity High stability Minimum odor Good heat conductivity Low corrosion tendency Wide temperature ranges Technical Data Order no. 10 liters 8891402 Working temperature (°C) -60...+110 Flash point (°C) > +135 Fire point (°C) > +443 Viscosity (kinematic at 20 °C in mm²/s) 5 Density (at 20 °C in g/cm³) 0.918 Pour point (°C) -100 Boiling point (°C) >205 Ignition temperature (°C) 443 Color clear
$1,922.00
Yeast Extract Powder for Mushrooms Mycology
Yeast Extract Powder Bacteriological GradeBest for Vigorous Mycelia Growth Our Agar Powder is extracted from Red Seaweed. Our agar is a complex polysaccharide and is a top choice for mycology cultures. This superfine agar dissolves quickly and has a high gel strength making it an excellent choice for a variety of applications an petri dishes. STORAGE: Cool dry conditions, sealed original package Mix: Mix: 1 gram per. 500ml pH: 6.35 ODOR: Characteristic of Yeast. CLARITY: Clear. SOLUBILITY: Soluble in water. TOTAL NITROGEN: 10.59% W/W SODIUM CHLORIDE: 4.80% W/W TOTAL PLATE COUNT: 2110 CFU/gm YEAST AND MOLDS:: 200CFU/gm E.COLI: NEGATIVE SALMONELLA: NEGATIVE STAPHYLOCOCCUS AUREUS: NEGATIVE PSEUDOMONAS AERUGINOSA: NEGATIVE SHELFLIFE: 4 years CAS# 8013-01-2 Directions for Use: 1. Mix 1g of soya peptone powder per 500ml of liquid culture or agar recipe for vigorous mycelia growth. 2. Boil and stir until powder is fully dissolved. Sterilize the mixture for 45min @15psi 250°F (121°C) in a pressure cooker or autoclave.
$11.90 - $59.50
Mushroom Grow / Spawn Bag Sealable w/ Injection Port Large 8" X 5" X 19" " - 0.5 Micron Filter 3 Mil Polypropylene Autoclavable
Mushroom Grow / Spawn Bag 0.5 Micron Filter | 3mil Polypropylene | Autoclavable | with Injection Port 8" X 5" X 19" (20cmx12cmx50cm) Our mycology bags are 8" wide, have a 5" gusset, and are 19" long. They are made of strong and durable polypropylene (3mil heavy duty). The bags are sealable with an impulse sealer. The bags are autoclavable and have a 0.5micron respiratory membrane filter. The breathable filter is a 1.5" diameter and is a microporous barrier which allows the passage of air but not contaminates. These bags are suitable for making sterile grain or sterile substrate. Suitable for Autoclave temperatures up to 250°F (121°C)
$1.25 - $62.50
Gas Plug Clear Mix #01
A mixture of minerals that electromagnetically affixes themselves to plant compounds and pigment, removing the bad stuff from extracted oil, and purifying your oil Gas Plug Clear Mix #01 SDS CONTAINS: CLAY, SILICA, MAGNESIUM, CARBON. * DISCLAIMER * You should only lose yield from your oil in correspondence to the amount of residual plant compound removed. If you lose more than 20% yield from gold oil, you have done it wrong. It is not uncommon to have a 50-60% cannabinoid crude oil that loses 30-40% yield under refinement. The amount of yield loss should be proportionate to the overall potency.
$80.00 - $400.00
PolyScience polyclean CLARIFIER - 8 oz
PolyScience polyclean CLARIFIER - 8 oz Description Keeps reservoirs clean and odor-free. Concentrated: 8 oz (237 ml) treats approximately 200 gallons (757 liters). Quantity: 8oz (237 ml) Temperature Range: n/a Part Number: 004-300040 Safety Data Sheet (SDS) For use with: Circulating Baths Refrigerated Circulating Baths Heating Circulating Baths Stainless Steel Open Bath Systems Polycarbonate Open Bath Systems Viscosity Bath Calibration Bath 75L Refrigerated Circulating Bath Coliform Bath General Purpose Water Baths LM Series Benchtop LS Series Benchtop MM Series Benchtop 6000 Series Chiller 3370 Liquid-to-Air Cooler 4100 Liquid-to-Liquid Cooler
$65.00$49.00
Half Ton - High Purity USA Propane - 99.5% Guaranteed
Half Ton High Purity USA PROPANE - 99.5% Guaranteed DISCLAIMER(S): This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in WELL VENTILATED AREAS! Notice: This item will ship via Freight ONLY. This tank requires a CGA 510 fitting - Sold Separately BVV™ always recommends distillation of every solvent before use. *Actual liquid weight is 420LB California now prohibits the retail sale of any Non-Odorized butane in quantities larger than 150ml. If you are not a retail purchaser you can call in to place an order. Permitted Sales Include the Following: Medical Collectives or Cooperatives operating under CA Health & Safety Code Section 11362.775 Persons licensed to perform volatile solvent extraction activity under CA Bus & Prof Code Division 10 Manufacturers, wholesalers, resellers, or retailers solely for the purpose of resale High purity Propane is USA sourced, and guaranteed to be 99.5% pure. This instrument grade solvent helps to produce a higher quality extract by reducing mystery oils and contaminants. Solvent comes in a DOT refillable LP tank with liquid withdrawal valve (Diptube). Propane Certificate of Analysis COA Lot Analysis: Propane: 99.5% + Methane: <1ppm Ethane: 3ppm Isobutane: 2380ppm n-Butane: 251ppm Propylene: <5ppm Isopentane: <1ppm Water: <3ppm Sulfer: <1ppm *Free of any hydrogen Sulphide based Ethyl Mercaptan Odorants. *This product is clean, colorless and odorless. *Actual Propane liquid weight is 420LB Due to FAA regulations, solvent tanks cannot be safely transported via means other than ground. Any order that has solvent will not be shipped in an expedited fashion. If an order with solvent is combined with any other items and chosen to be expedited, that entire order will ship via UPS Ground/Freight. We will not split up any orders and ship them separately. If a customer is wanting to expedite specific items and order solvent, 2 separate orders (1 for the solvent and 1 for the expedited items) will need to be placed in order to do so. Solvents do not ship to Hawaii, Puerto Rico, or any other US Territory outside of the contiguous 48 States. Shipping Solvent to Alaska may ONLY ship via freight and will be required to travel through Canada. We have this policy in place to ensure safety when transporting solvents, and to prevent any issue with shipping times for our customers. Propane Safety Data Sheet SDS
$2,800.00
Potato Dextrose Broth for Mushrooms Mycology
Gellan Gum Powder Nutritional Additive Our Agar Powder is extracted from Red Seaweed. Our agar is a complex polysaccharide and is a top choice for mycology cultures. This superfine agar dissolves quickly and has a high gel strength making it an excellent choice for a variety of applications an petri dishes. STORAGE: Cool dry conditions, sealed original package Mix: 10gram per. 500mlpH: 5.1 CLARITY: Clear. SOLUBILITY: Water Solubile. TOTAL MICROBIAL COUNT: 1200CFU/gm SALMONELLA: NEGATIVE E.COLI: NEGATIVE STAPHYLOCOCCUS AUREUS: NEGATIVE YEAST AND MOLDS: 190CFU/gm SHELFLIFE: 4 years. CAS# N/A Directions for Use: Mix 10g of potato dextrose powder per 500ml of distilled water, as a nutritional additive in your agar or liquid culture formulation. Boil and stir until powder is fully disolved. Sterilize the mixture for 45min @15psi 250°F (121°C) in a pressure cooker or autoclave.
$11.90 - $59.50
Carbon Chemistry Alumicel™ A
Carbon Chemistry Alumicel™ A Alumicel™ A Acidic; pH 4.7 Used for Chromatography Commonly used as an aid for decolorizing
$200.00 - $960.00
Julabo Thermal C10
Julabo Thermal C10 JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for the best temperature control results. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are matched specifically with each JULABO temperature control unit. JULABO Thermal bath fluids have been carefully selected and optimized for maximum performance with JULABO instruments. Thermal C10 is a clear 10 cSt silicone fluid rated for use in open bath JULABO units with a working temperature range of -20…+160 °C. Care should be taken to observe atmospheric moisture condensation in the bath fluid with prolonged sub-ambient operation in humid environments. Water and silicone fluids are not miscible. Operation at the maximum temperature for heating applications will result in vapor formation. Vapor formation at elevated temperatures is a normal occurrence for silicone fluids. The upper temperature limit of the fluid is lower than the fluid flashpoint.
$1,451.00 - $2,882.00
CGA 326 Nitrous Oxide Tank Regulator
This tank regulator will control the rate of fluid or gas flow using a butterfly valve. Our BVV butterfly valve is rated to 1000 psi, and is made of 304 stainless steel and features a PTFE valve seat making it compatible with N2O. The output will connect to a 1/4" barb for tubing. (seen here BVV 1/4" Tubing).
$88.48
Inland FF-10 Flushing Fluid
Inland FF-10 Flushing Fluid Inland FF-10 is a solvent free hydrocarbon flushing fluid designed to be used as part of a preventive maintenance program. Periodic use of FF-10 will enable the user to remove contaminants and particulates from within all areas of the pump without the worry of contaminating the pump with an expensive solvent Specifications FF-10 Vapor Pressure at 25ºC (torr) 2x10-4 Viscosity at 40ºC (cSt) 28 Viscosity at 100ºC (cSt) 4.5 Flash Point (ºC) 199 Fire Point (ºC) 221 Density at 25ºC (g/ml) 0.85 Inland FF-10 Flushing Fluid Safety Data Sheet SDS
$24.00 - $1,275.00
Superfine Agar Powder for Mushrooms Mycology Petri Dishes
Superfine Agar Powder Bacteriological, Food Grade, USP-NF Our Agar Powder is extracted from Red Seaweed. Our agar is a complex polysaccharide and is a top choice for mycology cultures. This superfine agar dissolves quickly and has a high gel strength making it an excellent choice for a variety of applications an petri dishes. Gel Strength (1.5%) : 1020 gm/cm² Gel Temperature: 38-40°C (100-104°F) CAS# 9002-18-0 Gluten Free Allergen Free Vegan & Vegetarian approved Non-GMO Shelf Life: 2 years pH: 5.5-8.5 Superfine Agar Powder Certificate of Analysis
$21.00 - $210.00
Half Ton - High Purity USA ISO-BUTANE - 99.5% Guaranteed
Half Ton - High Purity USA ISO-BUTANE - 99.5% Guaranteed DISCLAIMER(S): This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in WELL VENTILATED AREAS! Notice: This item will ship via Freight ONLY. This tank requires a CGA 510 fitting - Sold Separately BVV™ always recommends distillation of every solvent before use. *Actual liquid weight is 490LB California now prohibits the retail sale of any Non-Odorized butane in quantities larger than 150ml. If you are not a retail purchaser you can call in to place an order. Permitted Sales Include the Following: Medical Collectives or Cooperatives operating under CA Health & Safety Code Section 11362.775 Persons licensed to perform volatile solvent extraction activity under CA Bus & Prof Code Division 10 Manufacturers, wholesalers, resellers, or retailers solely for the purpose of resale At BVV™, quality is everything, and our ISO-Butane is certainly no exception. This ISO-Butane is sourced here in the U.S, so you know it’s going to be of high purity: we guarantee 99.5% purity. With such high quality, you’ll see the results. By cutting down on mystery oils and other contaminants, our instrument-grade solvent will make for a higher quality extract. This solvent is clean, odorless, and colorless, meaning there are zero hydrogen sulfide-based Ethyl Mercaptan odorants. It’ll arrive in a DOT refillable LP tank, equipped with liquid withdrawal valve (Diptube). Made to keep you going for a long time. Iso-Butane Certificate of Analysis COA Typical Analysis: ISO-Butane >99.8% Methane <1 ppm Ethane <1ppm N-Butane <2000 ppm Propane <250ppm Isopentane <2 ppm Water <3 ppm Oxygen <5 ppm Nitrogen <10 ppm Sulfur Non-Detected **Notes: Actual ISO-butane liquid weight is 490LB BVV™ always advises distillation of every solvent before using it. DISCLAIMER: Our items are intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. For safe operation, only use the unit in well-ventilated areas. ***Shipping Notes: This item will ONLY ship via UPS Ground, in accordance with FAA regulations. Any orders including solvent will NOT be shipped Expedited. If an order includes solvent as well as additional items, it will all be shipped via UPS Ground/Freight even if you’ve selected Expedited. If you want the non-solvent item to ship Expedited, place 2 separate orders; we won’t split up orders and ship them separately otherwise. We do not ship solvents to Hawaii, Puerto Rico, or any other U.S. Territory outside of the contiguous 48 States. Shipping solvent to Alaska will ONLY be via freight and will be required to travel through Canada. Our shipping policies are in place to ensure safe transport of solvents and prevent any problems with shipping times for Best Value Vacs customers
$2,950.00
Fireplace Fuel Clean Burning, Odorless, and Smokeless Grain Ethanol, Fuel for Table Top Fire Pit
Fireplace Fuel Made in USA - From Grain Alcohol Bright Flame fireplace fuel contains two ingredients and were open about sharing our fuel recipe. The mixture is made from grain derived corn based ethanol and there is about 7.8% Isopropyl Alcohol added for enhanced flame ambiance. Ethanol 200 Proof - 87.49% by Wt% (CAS# 64-17-5) Isopropyl Alcohol (IPA) - 7.8% by Wt% (CAS# 67-63-0) BVV Bright Flame Fireplace Fuel SDS
$12.99 - $129.00
Barista Pro Stainless Steel Cream Whipper 1 liter & 1 Pint
The Barista Pro Stainless Steel whipped cream dispenser was meticulously crafted to cater to the needs of both baristas and devoted coffee connoisseurs. Made entirely from 304 grade stainless steel, including the head, this product offers the convenience of dishwasher safety. The stainless steel construction makes this whipper heavy duty around the kitchen. Efficient Operation: Utilizing 8gm and/or 16gm nitrous oxide chargers, it assures a sleek and speedy whipping encounter (16gm chargers require adaptor). Long-lasting Freshness: Store your whipped cream in the refrigerator, and it'll stay fresh and luscious for up to 14 days.
$55.00 - $65.00
Mushroom Grow / Spawn Bag Sealable Large 8" X 5" X 19" - 0.5 Micron Filter 3 Mil Polypropylene Autoclavable
Mushroom Grow / Spawn Bag 0.5 Micron Filter | 3mil Polypropylene | Autoclavable 8" X 5" X 19" (20cmx12cmx50cm) Our mycology bags are 8" wide, have a 5" gusset, and are 19" long. They are made of strong and durable polypropylene (3mil heavy duty). The bags are sealable with an impulse sealer. The bags are autoclavable and have a 0.5micron respiratory membrane filter. The breathable filter is a 1.5" diameter and is a microporous barrier which allows the passage of air but not contaminates. These bags are suitable for making sterile grain or sterile substrate. Suitable for Autoclave temperatures up to 250°F (121°C)
$0.45 - $22.50
Huber SynOil M10.120.08, Heat transfer fluid -10 to 120°C
Huber SynOil M10.120.08, Heat transfer fluid -10 to 120°C SynOil is a low viscosity Poly-alpha-olefin based fluid with a strongly enhanced low temperature characteristic. SynOil has excellent thermal stability as well as a very low tendency to evaporate. The fluid has a high viscosity index, which enables the product to flow, even at low temperatures, and not to build a disruptive film at high temperatures. Safety Data Sheet Advantages: High thermal stability Low evaporation rate Low tendency to evaporate Transparent, clear Heat transfer fluid M10.120.08 Working temperature °C -10 to 120 Flash Point °C 145 Fire Point °C 176 Viscosity mm2/s (kinematic at 25 °C) 8 Density g/cm3 (at 20 °C) 0,8 Pour Point °C -66 Ignition temperature °C not specified Colour colourless, clear Thermal expansion coefficient 10-5/K not specified Heat conductivity W/(m·K) at 25 °C not specified Material incompatibility Natural Rubber®Silicone Rubber®
$630.00 - $1,010.00
Huber SilOil M90.055/170.03, Heat transfer fluid -90 to 170 °C
Huber SilOil M90.055/170.03, Heat transfer fluid -90 to 170 °C Low viscous, linear polydimethylsiloxane particularly suitable as environmentally friendly cold- and heat transfer media. SilOil M90.055/170.02 can be used in the range from -90 °C to 55 °C (for open systems) and to 170 °C in connection with externally sealed systems (for Unistats) SilOil M90.055/170.02 is characterised by a unique combination of low viscosity and a relatively high flash point. In contrast to competitive products, SilOil M90.055/170.02 oil is not classified as dangerous good and hazardous substance. It allows an economic use even at low temperatures due to its low viscosity. Since the SilOil M90.055/170.02 is based on polydimethylsiloxane this material is easily miscible with other media on the basis of polydimethylsiloxane. SilOil M90.055/170.02 oil is colorless, odorless and non-toxic. Safety Data Sheet Technical DataSheet Heat transfer fluid M90.055/170.02 Working temperature °C -90 to 55/170 open/closed systems: -90°C…55°C Unistats (only closed): -90°C…170°C Material: silicon oil Viscosity at 25°C: 2 mm²/s Color colorless, clear Material incompatibility Silicone rubber
$1,830.00 - $3,590.00
Huber SilOil M80.100/250.03, Heat transfer fluid -80 to 250°C
Huber SilOil M80.100/250.03, Heat transfer fluid -80 to 250°C SilOil M80.100/250.03 is a low-viscosity silicone fluid which, as a result of its special property profile, is particularly suitable for use as a cold and heat transfer medium in cryostats, thermostats and heat transfer installations. SilOil M80.100/250.03 can be used in the range from -80 °C to 100 °C (for open systems) and to 250 °C with externally sealed systems (Unistats). It should be borne in mind that, at high temperatures, SilOil M80.100/250.03 can be chemically altered by oxidizing media, such as air, or substances with a catalytic effect, such as acids, lyes and various metal compounds. An increase in viscosity, and possibly even gelling of the fluid owing to crosslinking reactions, must be expected in the presence of oxidising agents, while contact with products having a catalytic effect usually induces a process of depolymerization, resulting in a drop in viscosity Safety Data Sheet Advantage: virtually insoluble in water non-corrosive low setting points and vapor pressures high flash points low toxicity odorless no coking tendency under thermal stress high thermal stability resistance to ageing chlorine free Heat transfer fluid M80.100/250.03 Working temperature °C -80 to 100/250 open/closed systems: -80°C - 100°C Unistats (only closed): -80°C - 250°C Material: silicon oil Viscosity at 25°C: 7 mm²/s Color colorless, clear Material incompatibility Silicone rubber
$1,890.00 - $3,610.00
Media Bros Medium flow CRX-M
Media Bros Medium flow CRX This non-reactive medium flow variant allows operators to increase operating pressures and surface area for a more fine-tuned process. PH 7 Description: Introducing CRX Medium Flow™ (CRX-M™), a not-quite-powder/fine-grain premium filter media formulated for non-reactive, high flow and high-pressure hydrocarbon extraction. Its texture is designed to replace traditional powdered media like B80 without channeling and clogging issues commonly encountered with conventional powders. Extractors accustomed to traditional powders like B80 will find that CRX-M™ offers similar flow properties but with the added benefit of superior terpene retention. Like all of our premium blends, CRX-M™ is non-reactive, ensuring it's safe and easy to handle in your lab setting. It eliminates the need for extensive clean-up, saving you time and effort. CRX-M™ has all the benefits of its more granular twin, the flagship CRX™. It is a "perfect scrub" media, ideal for high-quality biomass and nug run processing. You want total control over flow and ensure the terpenes and flavonoids are retained from plant to extracted oil. Extraction labs vary in size, and so does our range of filter media. Our CRX-M™ product is available in three convenient packaging options: a 1.5 kg pouch, a 10 kg bucket, and a 100 kg drum. Whether operating on a small scale or running an extensive industrial process, we have the perfect packaging to meet your needs. Technical Specs: Solvent Type Hydrocarbon Color Remediation Level Average/Moderate Pesticide Remediation Level Low Selectivity/Polarity Level Moderately Selective/Medium Polarity Heavy Metal Remediation No Moisture Remediation Level Low Fats/Lipids/Waxes Level Medium Crystal Growth Fast Depth Filtration No Flow Rate Moderate Flow pH Level Neutral (pH 7) Best For Fresh Frozen, Nugs, High Quality Suitable for Reruns No Distillation Clean-up Low Scrub SOP SDS Before you get started, please remember this: As CRX™ and CRY™ are not powders designed not to absorb moisture before use, no baking or preparation is needed. For optimal success, ensure your flow is gentle and consistent. RATIOS Solvent to Biomass: ratios range from 6:1 to 10:1, depending on the quality of the plant matter you are distilling—lower ratios for top-tier biomass and higher ratios for older or lower-quality biomass. Media to Biomass: Load 150 - 250 grams of filter media into filtration housing for every 1 lb of biomass. The media quantity used is dependent on the quality of the biomass. Higher-quality biomass requires less media. Lower-quality biomass requires more media. The lookup table can be used as a reference, but because every kind of plant matter is different, you will need to experiment a little bit to achieve the best results. That said, this chart is an excellent baseline from which to start. TEMPS To ensure optimal performance, keep the temperature at -10°C or below while using the media. Our media is designed to prevent clogging. FLOW When transferring from the biomass vessel to the recovery vessel, maintain a maximum flow rate of 1 GPM. Our media performs best with a consistent and gentle flow. To prevent channeling, avoid sudden hydraulic surges through the CRC column. A shower or initial fill of the column is highly recommended for optimal results. YIELD Any lost yield can be fully recovered by flushing the media with solvent. Most users report achieving substantial yield gains by maintaining high solvent-to-biomass ratios or flushing our media after an extraction transfer.
$30.00 - $1,600.00
CHEMTEK ChloroSorb Neutral
CHEMTEK ChloroSorb Neutral ChloroSorb Neutral is an acid-activated bentonite/carbon adsorbent that has been neutralized to a neutral pH of 7. General uses are bleaching, deodorizing, or heavy metal removal. ChloroSorb Neutral SDS
$50.00 - $2,250.00
Media Bros CR41™
CR41™ FILTER MEDIA FOR BHO EXTRACTION CR41 is a perfect blend of our Zeolites and GCRAC, best suited for older oxidized biomass lots and light pesticide/environmental contaminants. PH 7 Description CR41™ is a pH-neutral, fast-flowing, high-performing, multipurpose blend. It helps refine color, remove pesticides, and purify your product. It is blended, prepared, and ready for inline CRC applications. Packaged in: 1.5 kg pouch, 10 kg bucket, and 100 kg drum FDA GRAS Approved 100% Natural TECHNICAL SPECS Solvent Type Hydrocarbon Color Remediation Level Heavy/High Pesticide Remediation Level Medium Selectivity/Polarity Level Moderately Selective/Medium Polarity Heavy Metal Remediation Yes Moisture Remediation Level Low Fats/Lipids/Waxes Level Medium Crystal Growth Fast Depth Filtration No Flow Rate High Flow pH Level Neutral (pH 7) Best For Older Biomass, Low Quality Suitable for Reruns Yes Distillation Clean-up High Scrub
$55.00 - $2,500.00
CHEMTEK ChloroSorb Acidic
ChloroSorb Filtering Media is an acid-activated bentonite/carbon blend for bleaching and deodorization. It is generally used for additional bleaching efficiency in conjunction with other sorbents. Contains 5% carbon. ChloroSorb SDS
$50.00 - $2,000.00
CHEMTEK ChloroSorb Natural
ChloroSorb Natural Filtering Media is a heat-activated bentonite/carbon adsorbent for bleaching and deodorization. Contains 10% carbon. ChloroSorb Natural SDS
$50.00 - $2,000.00
Gas Plug Clear Mix #02
Gas Plug Clear Mix #02 This special Ethanol Blend is a mixture of minerals that electromagnetically affixes themselves to plant compounds and pigment, removing the bad stuff from extracted oil, and purifying your oil Gas Plug Clear Mix #02 SDS CONTAINS: CARBON, SILICA, MAGNESIUM. * DISCLAIMER * You should only lose yield from your oil in correspondence to the amount of residual plant compound removed. If you lose more than 20% yield from gold oil, you have done it wrong. It is not uncommon to have a 50-60% cannabinoid crude oil that loses 30-40% yield under refinement. The amount of yield loss should be proportionate to the overall potency.
$30.00 - $200.00
Media Bros K-CRAC Filter Media
KLEANUP COLOR REMEDIATION ACTIVATED CARBON "Kleanup" Color Remediation Activated Carbon (K-CRAC) is a highly versatile, non-toxic, food-grade post-processing activated carbon powder designed to enhance the purification process of cannabis oil. DESCRIPTION "Kleanup" Color Remediation Activated Carbon (K-CRAC) is a highly versatile, non-toxic, food-grade post-processing activated carbon powder designed to enhance oil purification. K-CRAC boasts a high-surface-area activated carbon powder that provides top-notch purification capabilities. It effectively removes undesirable compounds and impurities from oil during post-processing. K-CRAC is specifically formulated to clean up the full-color body of oil, improving its appearance and quality. K-CRAC is best used with hydrocarbons due to its polarity. Packaged in: 1.5 kg pouch and 10 kg bucket. Use Media Bros Activated Activated Alumina as an alumina media filter bed for best results.
$100.00 - $6,000.00
CDA 12A w/ Toluene High Purity Extraction Solvent
CDA 12A w/ Toluene HAZMAT ITEMS ARE NON-REFUNDABLE. ALL SALES ARE FINAL (Note: Container style and color may vary) BVV's Ultra High Purity Toluene Denatured Ethanol (CDA 12A) is distinguished by its exceptional purity, Our CDA 12A formulation combines 95% Food Grade/USP/ACS 200 Proof Ethanol, derived from corn, with ~5% high-purity Toluene. Adhering to stringent industry standards, ensuring it meets the precise requirements of our customers, our Ultra High Purity Toluene Denatured Ethanol excels across diverse applications widely adopted as an effective botanical extraction solvent. Being that our Ultra High Purity Denatured Ethanol is made unfit for consumption when denatured with Toluene it is not subject to the Federal Excise Tax on alcohol saving you a huge cost without compromising on it suitability for top-tier extractions. Primarily utilized as pure ethanol in extraction processes, this solvent is favored for its cost-effectiveness and extraction efficiency. Reduce manufacturing costs and increase extraction efficiency with BVV's Ultra High Purity Toluene Denatured Ethanol. Disclaimer: Prices may vary due to market value and for orders of 4 totes or more and a tanker there could be up to a 2 week lead time. Call in for more accurate lead times. Spigots/Faucets are only compatible with 5 Gallon Plastic Jugs and must be purchased separately Key Features: Significantly Reduced Cost due to the absence of Federal Tax Produces Exceptional Quality Extractions Leaves No Residuals or Tastes Evaporates Completely in a Rotary Evaporator Specifications Vapor Pressure: 40.9mmHg at 20°C UN Number 1170 Density: 0.7905g/cm³ Specific Gravity 0.7905 Flash Point: 13.9°C (57°F) Boiling Point: 78.5°C (173°F) Melting Point: -90.0°C (-130°F) Chemical Formula: Ethanol C2H6OToluene C7H8 CAS#(s) Ethanol 64-17-5Toluene 108-88-3 Molecular Weight: 72.1057 Appearance Colorless Liquid Odor: Mint or acetone-like Density 0.7905g/cm³ Boiling Point: 78.5c/173.3F Solubility in water: Miscible GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H225, H319 GHS Precautionary Statements P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P312, P337+P313, P370+P378, P403+P233, P403+P235, P405, P501 UN Identification Number: 1987 Proper Shipping Name: Alcohols Transport Hazard Class: 3 Packing Group: I DOT Placard: What is Denatured Ethanol? Denatured ethanol, also known as denatured alcohol, is ethanol (ethyl alcohol) that has been rendered unfit for human consumption by the addition of denaturants. Denaturants are typically chemicals that make the ethanol taste bad or have toxic effects, and they are added to discourage people from drinking the substance. The denaturation process is done to avoid the high taxes and regulations associated with beverage alcohol, as denatured ethanol is intended for industrial, pharmaceutical, or cosmetic uses rather than for consumption. Common denaturants include toluene, heptane, methanol, isopropyl alcohol, acetone, and other chemicals. Denatured ethanol is widely used in various industries, such as in the production of paints, solvents, cleaning products, and as a fuel for alcohol burners. Why is Ethanol Denatured? Ethanol is denatured, or rendered undrinkable, for several reasons: Tax Purposes: Denaturing ethanol allows for the imposition of lower taxes on industrial or non-beverage alcohol compared to potable alcohol. Governments often place higher excise taxes on alcohol intended for human consumption. Regulatory Compliance: Denaturing ethanol is a regulatory requirement to discourage the illegal diversion of tax-free industrial alcohol for beverage use. The addition of denaturants makes it unpalatable and unsafe for consumption. Public Safety: Making ethanol undrinkable helps prevent accidental or intentional ingestion of industrial alcohol, which can be toxic. Denaturing agents are chosen to deter people from attempting to use denatured alcohol as a substitute for beverage alcohol. Industrial Use: Denatured ethanol is widely used in various industries, including pharmaceuticals, cosmetics, and manufacturing. It serves as a solvent, fuel, or raw material in these applications. Common denaturants include substances like heptane, toluene, methanol, isopropanol, and various chemicals that make the alcohol unsuitable for human consumption while maintaining its usability in industrial processes. The specific denaturing formulations, such as CDA 12-A mentioned earlier, are defined by regulatory agencies to ensure compliance with safety and tax regulations. What is denatured ethanol used for? Denatured ethanol is used for various industrial and commercial purposes where the alcohol is needed for its properties but should not be consumed. Here are some common applications: Industrial Solvent: Denatured ethanol is widely used as a solvent in industries such as pharmaceuticals, cosmetics, and manufacturing. It is effective in dissolving a variety of substances. Cleaning Agent: Due to its solvent properties, denatured ethanol is used as a cleaning agent for surfaces, equipment, and machinery in industrial and commercial settings. Fuel Additive: Denatured ethanol is sometimes used as a fuel additive, especially in the blending of gasoline. It can improve combustion efficiency and reduce emissions. Paint and Coating Industry: It is used as a solvent in the formulation of paints, varnishes, and coatings. Pharmaceuticals: Denatured ethanol is used in the pharmaceutical industry for various purposes, including the extraction of medicinal compounds. Laboratory Use: In laboratories, denatured ethanol is often used for tasks like sterilization and as a solvent for experiments. Inks and Dyes: It is employed in the production of inks and dyes due to its ability to dissolve pigments. Adhesives and Sealants: Denatured ethanol is used in the formulation of adhesives and sealants. Window Cleaning: It is used in commercial window cleaning solutions. Automotive Industry: In the automotive industry, denatured ethanol is used for cleaning and degreasing. What can be used to denature ethanol? Here are examples of common Completely Denatured Alcohol (CDA) formulations used to denature ethanol: CDA 12-A To every 100 gallons of alcohol, add either: Five gallons of n-heptane or 5 gallons of toluene. CDA-19 To every 100 gallons of ethyl alcohol (not less than 160 proof), add: 4.0 gallons of either methyl isobutyl ketone, mixed isomers of nitro propane, or methyln-butyl ketone 1.0 gallon of either kerosene, deodorized kerosene, gasoline, unleaded gasoline, rubber hydrocarbon solvent, or heptane. CDA-20 To every 100 gallons of ethyl alcohol (not less than 195 proof), add a total of: 2.0 gallons of either unleaded gasoline, rubber hydrocarbon solvent, kerosene, or deodorized kerosene, or any combination of these. What does CDA mean? Completely Denatured Alcohol (CDA) is a type of denatured alcohol that has been rendered unfit for human consumption by the addition of denaturing agents. Denatured alcohol is ethanol (ethyl alcohol) that has been intentionally adulterated to make it toxic, foul-tasting, or otherwise undrinkable. This denaturing process is done to exempt the alcohol from excise duty and other taxes, as it's not intended for use in beverages. The denaturing agents used in CDA can vary, but they often include chemicals such as methanol, isopropanol, or other substances that make the alcohol unpalatable and potentially harmful if ingested. The specific formulation of denatured alcohol may be regulated by government authorities to ensure it meets safety standards and legal requirements. CDA is commonly used in industrial applications, as a solvent, fuel, or as a cleaning agent. It's important to note that due to the addition of denaturing agents, CDA should not be used for purposes that involve contact with the human body or ingestion. Safety precautions, including proper ventilation, should be followed when working with denatured alcohol. What is CDA 12A? CDA 12-A is a formulation specified by the Alcohol and Tobacco Tax and Trade Bureau (TTB) for Completely Denatured Alcohol (CDA). The formula is defined under §21.26 as Formula No. 12-A. The composition of CDA 12-A is as follows: For every 100 gallons of alcohol, add either: 5 gallons of n-heptane or 5 gallons of toluene. This denaturing process renders the ethanol unfit for consumption while meeting regulatory requirements for various industrial applications. CDA formulations, including CDA 12-A, are used to denature ethanol for purposes such as industrial solvents, cleaning agents, and manufacturing processes. Can you remove Toluene from CDA 12A? When toluene is added to ethanol it creates an azeotrope between the ethanol and n-heptane. An azeotrope is defined as a mixture of two liquids that have a constant boiling point and composition through distillation. This azeotrope results in the ethanol and n-heptane evaporating at the same temperature, making it extremely difficult to separate the two through distillation. While these azeotropic solvents are still easily recovered from a botanical extract at a relatively low boiling point around 78C/173F using a rotary evaporator or falling film evaporator, it is near impossible to separate the two via distillation. What is an Azeotrope? An azeotrope is a mixture characterized by having identical concentrations in both its vapor and liquid phases. This stands in contrast to ideal solutions, where one component is usually more volatile than the other, allowing for separation through distillation. When an azeotrope forms, the concentrations in both phases remain the same, hindering separation through traditional distillation methods. Azeotropes consist of a blend of at least two different liquids, and this mixture can exhibit either a higher or lower boiling point than either of its individual components. Azeotropes become relevant when certain liquid fractions resist alteration through distillation processes. In typical mixtures, components can be extracted using Fractional Distillation, a process involving repeated distillation stages. The more volatile component vaporizes and is collected separately, while the less volatile component remains in the distillation container, resulting in two distinct, pure solutions.
$8.00 - $250.00
White Kitchen Whip Aluminum Dispenser 1 Pint & 1 Liter
Crafted from stunning aluminum, our half-pint and 1 liter cream whipper by BestWhip ensures top-notch quality for those who seek to prepare smaller quantities of whipped cream. Don't be fooled by its size; this compact dispenser is a powerhouse in the kitchen, delivering flawless whipped cream consistently. Professional Grade: Engineered to meet the standards of culinary experts. Elegant Design: The plastic head complements the beautiful aluminum construction, adding an aesthetic appeal to your kitchen tools. Efficient Operation: Utilizing 8gm nitrous oxide chargers, it guarantees a smooth and quick whipping experience. Perfect Capacity: Holds 1 quart of liquid, making it suitable for intimate gatherings or individual servings. Long-lasting Freshness: Store your whipped cream in the refrigerator, and it'll stay fresh and luscious for up to 14 days.
$29.95 - $39.95
Inland 56 Vacuum Pump Oil (LVO 200)
Inland 56 Vacuum Pump Oil The Inland 56 is an equivalent to the Leybold LVO 200 oil. This oil can be used in pumps specifically designed for pumps that use the Leybold LVO 200 oil. Inland 56 Vacuum Pump Oil Safety Data Sheet SDS
$30.00 - $4,700.00
Carbon Chemistry Alumicel™ N
Carbon Chemistry Alumicel™ N Alumicel™ N Neutral; pH 6.7 Used for Chromatography Commonly used as an aid for decolorizing Download Safety Data Sheet
$200.00 - $960.00
Gas Plug L-5 Bentonite Clay
Purify and prepare your oil with Bentonite Clay ‘L-5’ Gas Plug L-5 Bentonite Clay SDS
$78.00$45.00
Gas Plug U42 Activated Bleaching Clay
Purify and prepare your oil with U42 Activated Bleaching Clay. Gas Plug U42 Activated Bleaching Clay SDS
$100.00
Oxone PS-16 Monopersulfate
OxoneTM PS-16 Monopersulfate | Non-Chlorine Shock Oxone PS-16 Compound is used as an active ingredient in disinfectant formulations (not registered as a biocide in USA), and as an oxidizing agent in other formulations, such as pool & spa non-chlorine shock oxidizers, denture cleansers and laundry bleaches. The grade is also used as a wet strength resin paper repulping aid, metal surface treatment agent, selective oxidizer in chemical synthesis, wool shrinkproofing treatment, waste water treatment and odour control agent. Applications: Water Treatment: It can be used to treat water, including drinking water and pool & spa water, due to its ability to kill bacteria and neutralize contaminants. Cleaning and Sanitization: It's used in various industrial cleaning products, especially for disinfecting surfaces or purifying air and water. Oxidation Reactions: In chemical processes, Oxone PS-16 can be used as a strong oxidizing agent to break down pollutants or aid in chemical synthesis. Active Ingredients: Potassium Peroxymonosulfate (KHSO₅) - 45% Other Ingredients - 55% Total -100% Bad Dimensions: 21"x14"x4" (55.1lbs)
$276.00
Dipropylene Glycol (DPG) Low Odor
Dipropylene Glycol (DPG) - Low Odor - Technical Grade Dow® Chemical Product Dipropylene glycol (DPG) is a clear, colorless, and odorless liquid that is commonly used as a solvent, humectant, and emulsifier in a wide range of industries. It is a derivative of propylene glycol and consists of two propylene glycol molecules connected by an ether bond. Dipropylene glycol is less hygroscopic than propylene glycol and has a higher molecular weight, which makes it more viscous and less likely to evaporate quickly. In the fragrance and cosmetic industries, DPG is often used as a carrier for essential oils, perfumes, and other aromatic compounds, helping to dissolve and evenly distribute them in formulations. It helps improve the texture of creams, lotions, and other personal care products, while also enhancing their stability and shelf life. Due to its low toxicity, DPG is considered safe for use in food and cosmetic products in regulated amounts. However, as with many chemicals, prolonged or excessive exposure may lead to skin irritation or sensitivity in some individuals. As defined by OSHA Hazard Communication Standard, this product is not known to be a hazardous chemical. Applications and Uses for DPG: Fragrance and Perfume Industry: DPG is commonly used as a carrier or solvent for essential oils and fragrance compounds. It helps to dilute and stabilize fragrances, making them easier to apply and ensuring that the scent lasts longer. Cosmetics and Personal Care Products: DPG is a key ingredient in many personal care products such as lotions, creams, shampoos, deodorants, and soaps. It acts as a humectant (moisture-retaining agent), solvent, and emulsifier, helping to improve the texture, stability, and overall effectiveness of the product. Fog Solution: dipropylene glycol is frequently found in fog juice / liquid, where it works as a base to create heavy low hanging fog vapor. Where as propylene glycol produces a lifting lighter fog vapor that tends to go towards the ceiling. Our low odor formula make it perfect for indoor fog applications. Pharmaceuticals: In the pharmaceutical industry, dipropylene glycol is used as a solvent in medications, especially in liquid formulations like oral solutions, syrups, and injectable drugs. It helps dissolve active ingredients and stabilize the formula. Industrial Applications: DPG is used in the manufacture of paints, coatings, cleaning agents, and lubricants. It functions as a solvent and helps improve the consistency and spreadability of these products. Antifreeze and De-icing Products: While less common than propylene glycol, dipropylene glycol can also be used in some antifreeze and de-icing formulations due to its low freezing point and excellent solvency properties. Food and Beverages: Though not as widely used as propylene glycol, DPG can be found in certain food and beverage products, where it serves as a solvent or stabilizer for flavorings, colorants, and other additives. Textile and Leather Industry: DPG is used as a softener and finishing agent for textiles and leather products, contributing to a smooth texture and enhancing the durability and quality of the materials. What are some of the fragrance products you can make with diproplene glycol (DPG)? Perfumes and colognes Skin care products (creams, lotions, body oils, sun-care products) Deodorants and antiperspirants (roll-on, stick deodorants) Hair care products (shampoos, conditioners, styling, coloring products) Shaving products (creams, foams, gels, after-shave lotions) Bath and shower products Dipropylene Glycol Certificate of Analysis COA Dipropylene Glycol Safety Data Sheet SDS
$18.00 - $1,392.00
Vinegar 50% Technical Grade Industrial Stregnth
Technical Grade Vinegar 50% Made in USA - Industrial Strength The acidic nature of nontoxic vinegar is so powerful it dissolves mineral deposits, dirt, grease, grime from glass, tile, laminate, and stainless-steel surfaces. It deodorizes, and degreases surfaces in kitchens, laundry rooms, and bathrooms. This lab grade product delivers greater cleaning and descaling performance for industrial applications. Higher concentrations of acetic acid (Vinegar) like this can impair the cell membrane of bacteria and fungi, making this a great choice for disinfection. BVV Vinegar 50% Certificate of Analysis (COA) BVV Vinegar 50% Safety Data Sheet (SDS) ***Recommended dilution varies by application.
$13.00 - $2,210.00
Media Bros CRAC Filter Media
COLOR REMEDIATION ACTIVATED CARBON (CRAC) FOR ETHANOL EXTRACTION Our powdered version of the G-CRAC, CRAC, is a highly modified bituminous coal carbon with increased surface area. CRAC is unique because it concentrates reactants via adsorption and then promotes their reaction on the pore's surface, which is best suited for heavy environmental clean-up. PH 7 DESCRIPTION Color Remediation Activated Carbon (CRAC) is a top-shelf carbon powder that has revolutionized extraction. Its high-performance selectivity sets it apart from other filter media and is crucial in producing a high-quality extract free of undesirables and impurities. CRAC stands out due to its meticulous preparation process. Its granular consistency makes it easy to handle and is thoroughly sifted, which minimizes the risk of carbon or dust contamination. This commitment to quality creates a safer, cleaner work environment. CRAC is also environmentally friendly; it's non-toxic, biodegradable, and recyclable. This added layer of safety doesn't compromise its effectiveness; instead, it ensures the integrity of the end product and the health of your workforce. CRAC is pH-neutral double activated, which maximizes the carbon's surface potential, allowing for more efficient adsorption and color remediation. By opting for CRAC, you are choosing a product that has been fine-tuned to deliver the best possible extraction results. CRAC stands out not just for what it contains but also for what it doesn't. CRAC delivers all the microporous, mesoporous, and macroporous media you can handle, providing comprehensive remediation of ethanol extract and oil purity you can count on. At Media Bros, we understand the diverse needs of various operations. Hence, CRAC is available in a 1.5 kg pouch, a 4 kg package, a 10 kg bucket, and a 100 kg drum. Regardless of your operation's size, there is a bag of CRAC tailored to your needs. Wine, cheese, peanut butter, jelly, CRAC, and Activated Alumina. The combination of CRAC and Activated Alumina as a filter bed provides a practical and robust solution for ethanol extraction, creating a superior filter blend that enhances the overall remediation process. NSF Certified Use Media Bros Activated Alumina as an alumina media filter bed for best results. TECHNICAL SPECS Solvent Type Hydrocarbon + Ethanol Color Remediation Level Heavy/High Pesticide Remediation Level High Selectivity/Polarity Level Less Selective/Most Polar Heavy Metal Remediation Yes Moisture Remediation Level Low Fats/Lipids/Waxes Level Medium Crystal Growth Fast Depth Filtration No Flow Rate Low Flow pH Level Neutral (pH 7) Best For Older Biomass, Low Quality Suitable for Reruns Yes Distillation Clean-up High Scrub
$75.00 - $4,200.00
You have seen 192 out of 201 products