Stainless Steel Parts and Accessories

48 products


  • Nuts For High Pressure Clamps Shop All Categories BVV

    Brass Nuts For High Pressure Clamps

    Brass Nuts for High Pressure clamps These are replacement nuts for High Pressure clamps and are made of brass and have a 5/8" Hex with a 3/8"-16 Threading. After repeated usage nuts on high pressure clamps will wear down and you will notice filings on the bolt when you notice this it is time to replace the bolts because they may fail unexpectedly.  

    $1.40

  • Stainless steel Washers For High Pressure Clamps

    Washers For High Pressure Clamps

    Washers For High-Pressure Clamps These stainless steel flat washers provides a larger circular bearing surface, which helps prevent a nut or bolt head from pulling through the material.   

    $0.30

  • Female NPT Stainless Steel Sight Glass Shop All Categories BVV

    Compact In-line Sight Glass Female NPT Stainless Steel (Flow Sight)

    The body of the flow sight is 304 stainless steel. The glass sight has a pressure tight, solid gasket design with Viton seals. The unit tolerates temperatures up to 180° F. The maximum recommended pressure is 125 PSI. BVV™ FNPT Stainless Steel Sight Glass - Data Sheet Specifications 1/4" 3/8" 1/2" 1" Body Material 304 Stainless Steel Gasket Material Viton Length 2-3/16" 2-1/4" 2-1/2" 2-7/8" Width 7/8" 1" 1-1/4" 2" Viewing Port Size 1" 1-1/8" 1-3/16" 1-1/4" PSI Rating 150 150 100 100

    $74.00 - $105.00

  • 6" x 1.5" x (2) 1/4" FNPT Tri-clamp Endcap BVV Shop All Categories BVV

    6" x 1.5" x (2) 1/4" FNPT Tri-clamp Endcap BVV™

    6" x 1.5" x (2) 1/4" FNPT Tri-clamp Tri Clover  Endcap BVV™ This End Cap come with Two 1/4"-18 FNPT Threaded connection and 1.5" Tri-Clamp ferrule welded to the end cap with a sanitary weld with a 0.5" Tube Extension Below the Lid. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 1.5" Tri-Clamp Connection. These 3 connections are welded on a 6" Tri-Clamp End Cap. Specification Material: 304 Stainless Steel Connection Types: 1.5" Tri-Clamp - 0.5" Tube Extension Below Lid 6" Tri-Clamp 1/4" - 18 FNPT Standard: 3A BVV™ 6" x 1.5" x (2) 1/4" FNPT Tri-clamp Endcap - Drawing   BVV™ 6" x 1.5" x (2) 1/4" FNPT Tri-clamp Endcap - End Cap Chart  

    $99.00

  • 6" Tri-Clamp x (3) 1.5" TriClamp x (4) 1/4" FNPT Hemispherical Lid Shop All Categories BVV

    6" Tri-Clamp Hemispherical Extractor Lid

    6" Tri-Clamp Tri Clover x (3) 1.5" TriClamp x (4) FNPT Hemispherical Lid This End Cap comes with Four FNPT Threaded connection and Three 1.5" Tri-Clamp ferrule welded to the end cap with a sanitary weld with a 3" Tube Extension Below the middle port on the lid. These allow the user to adapt and connect a threaded connection to the NPT ports and three 1.5" Tri-Clamp Connections on a 6" Hemispherical Tri-Clamp lid. With this versatile Tri-Clamp Extractor Lid, users can quickly create a leak-proof connection allowing easy assembly or disassembly for routine maintenance and inspection.   Specification SKU: 600HEL 600HEL-V2 Material: 304 Stainless Steel 304 Stainless Steel Connection Types: 6" Tri Clamp 3x 1.5" Tri Clamp (Tube Extension Below Center Port) 4x 1/4" FNPT 2x 1/4" FNPT - 2x 1/2" FNPT Standard: 3A   BVV™ 6" Tri-Clamp x (3) 1.5" TriClamp x (4) 1/4" FNPT Hemispherical Lid - Drawing   BVV™ 6" Tri-Clamp x (3) 1.5" TriClamp x (4) 1/4" FNPT Hemispherical Lid - End Cap Chart  

    $160.00 - $175.00

  • 4" x 1.5" x1/4" FNPT Tri-Clamp Endcap Shop All Categories BVV

    4" x 1.5" x1/4" FNPT Tri-Clamp Endcap

    4" x 1.5" x1/4" FNPT Tri-Clamp Tri Clover Endcap This End Caps come with a 1/4"-18 FNPT Threaded connection and 1.5" Tri-Clamp ferrule welded to the end cap with a sanitary weld. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 1.5" Tri-Clamp Connection. These 2 connections are welded on a 4" Tri-Clamp End Cap.     Specification Material: 304 Stainless Steel Connection Types: 1.5" Tri-Clamp - 3" Tube Extension Below Lid on Center Tri-Clamp Port 4" Tri-Clamp 1/4" - 18 FNPT Standard: 3A BVV™ 4" x 1.5" x1/4" FNPT Tri-Clamp Endcap - Drawing   BVV™ 4" x 1.5" x1/4" FNPT Tri-Clamp Endcap - End Cap Chart  

    $68.00

  • 90° Degree Tri-Clamp Bend Shop All Categories BVV 1.5" Tri-Clamp

    90° Degree Elbow Tri-Clamp Bend

    90° Degree Elbow Tri-Clamp Bend Specifications: 304 Grade Stainless Steel w/ High Polish interior Fits 1.5", 2",4" or 6" Tri-clamp / Tri Clover Unique 90 Degree Bend Disclaimer:All Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractor DO NOT come with a standard 1 year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.User assumes all responsibility and risks of the system

    $25.00 - $205.00

  • 4" Tri-Clamp x (2) 1/4" FNPT Shop All Categories BVV

    4" Tri-Clamp x (2) 1/4" FNPT

    4" Tri-Clamp x (2) 1/4" FNPT These End Caps come with Two 1/4"-18 FNPT Threaded connection welded to the end cap with a sanitary weld. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid. Specification Material: 304 Stainless Steel Connection Types: Tri-Clamp 1/4" - 18 FNPT Standard: 3A Sizes Available: 4" BVV™ 4" Tri-Clamp x (2) 1/4" FNPT - Drawing   BVV™ 4" Tri-Clamp x (2) 1/4" FNPT - End Cap Chart  

    $38.00

  • 1/4" NPT 316 SS Tested Valve with 37 Degree SS316 Flare

    1/4" NPT 316 SS Tested Valve with 37 Degree SS316 Flare

    Stainless Steel Ball Valve This is a pre-built and nitrogen tested 1/4 316 Stainless Steel Miniature Ball Valve features a stainless steel ball and PTFE seats and packing on the inside and is rated from -40 to 230C. It comes with a 1/4" 37 degree flare and 1/4" MNPT extender pre-installed on it. The ball valve comes pre-installed with valve and pretaped. This is a standard valve compatible with most closed columns.

    $50.00

  • 12" x (3) 2" x (2) 1/4 FNPT Endcap Shop All Categories BVV

    12" x (3) 2" x (2) 1/4 FNPT Endcap

    12" x (3) 2" x (2) 1/4 FNPT Endcap This End Cap come with Two 1/4"-18 FNPT Threaded connection and Three 2" Tri-Clamp/ Tri Clover ferrule welded to the end cap with a sanitary weld with a 0.5" Tube Extension on center ferrule Below the Lid. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 2" Tri-Clamp Connection. These 5 connections are welded on a 12" Tri-Clamp End Cap.   Specifications Material: 304 Stainless Steel Connection Types: 2" Tri-Clamp - 0.5" Tube Extension on center ferrule Below Lid 12" Tri-Clamp 1/4" - 18 FNPT Standard: 3A BVV™ 12" x (3) 2" x (2) 1/4 FNPT Endcap - Drawing   BVV™ 12" x (3) 2" x (2) 1/4 FNPT Endcap - End Cap Chart  

    $298.00

  • 12" Tri-Clamp x (3) 2" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid Shop All Categories BVV

    12" Tri-Clamp x (3) 2" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid

    12" Tri-Clamp/ Tri Clover x (3) 2" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid This End Cap comes with Four 1/4"-18 FNPT Threaded connection and Three 2" Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 2" Tri-Clamp Connection. These 7 connections are welded on a 12" Hemispherical Tri-Clamp End Cap.   Specifications Material: 304 Stainless Steel Connection Types: 2" Tri-Clamp - 3" Tube Extension Below Lid on Center Tri-Clamp Port 12" Tri-Clamp 1/4" - 18 FNPT Standard: 3A BVV™ 12" Tri-Clamp x (3) 2" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid - Drawing   BVV™ 12" Tri-Clamp x (3) 2" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid - End Cap Chart

    $350.00

  • 6" Tri Clamp 316 Stainless Steel Spools New Products BVV 2-inch

    6" Tri Clamp 316 Stainless Steel Spools

    6" Tri Clamp / Tri Clover 316 Stainless Steel Spools Sizes Available:   6" x 4" Tri-Clamp Stainless Steel Spool 6" x 8" Tri-Clamp Stainless Steel Spool 6" x 18" Tri-Clamp Stainless Steel Spool 6"x 36" Tri-Clamp Stainless Steel Spool   Specifications Tri-Clamp Size 6" Material 316 Stainless Steel Standard 3A High Polish Spool OD 6" Spool ID 5.78" Flange OD 6.57       OD = Outer Dimension   ID = Inner Dimension   Disclaimer to Customer:   User assumes all responsibility and risks of the system for all Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractors. They DO NOT come with a standard 1 year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.   Material Capacity Cylinder Volume Radius (in) 1.5" 2" 3" 4" 6" 8" 10" 12" Length (in) Volume (in3) Select Material Butane ISO-Butane Propane How Much Will Fit in Cylinder FormulaVolume x Weight of Water x Specific Gravity ConstantsWeight of Water = 0.0360 (lbs / in3)Specific Gravity of = Lbs. of : Recommended: Account for an 80% fill to avoid a hydraulic lock  How Much Material Will Fit in the Cylinder Volume Packing Density (g) 2.5 3 3.5 4.3 Grams of Material Lbs. of Material Cans of Butane Cans of Butane by Size Pounds of Butane mL fl oz lbs # of Cans 420 14.2 300 10.1 200 6.7 150 5.07

    $110.00

  • Compression Ring for Filter Plates Shop All Categories BVV 1.5-inch

    Compression Ring for Filter Plates

    Compression Ring for Filter Plates These compression rings designed to fit in Tri-Clamp/ Tri Clover spools are used in combination with filter plates or inline filter kits by providing compression to the filter media such the pre-cut stainless steel mesh filters or ashless filter media to keep them in place during the extraction process. Sizes Available: 1.5" 2" 3" 4" 6" 8" Specification Material: 304 Stainless Steel

    $15.00

  • 6" Tri-Clamp x (2) 1/4" FNPT ports w/ Shower Head Shop All Categories BVV

    6" Tri-Clamp x (2) 1/4" FNPT ports w/ Shower Head

    6" Tri-Clamp Tri Clover x (2) 1/4" FNPT Ports w/ Shower Head These End Caps come with Two 1/4"-18 FNPT Threaded connection welded to the end cap with a sanitary weld. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid. Shower Head End Caps help disperse solvent input into a system which creates better material saturation when flooding a material column. This helps to prevent channeling, ensuring all the material is saturated.     Specifications Material: 304 Stainless Steel Connection Types: Tri-Clamp 1/4" - 18 FNPT Standard: 3A Sizes Available: 6"

    $98.00

  • 3" Tri Clamp 316 Stainless Steel Spools New Products BVV 1"

    3" Tri Clamp 316 Stainless Steel Spools

    3" Tri Clamp / Tri Clover 316 Stainless Steel Spools Sizes Available:   3" x 2" Tri-Clamp Stainless Steel Spool 3" x 4" Tri-Clamp Stainless Steel Spool 3" x 6" Tri-Clamp Stainless Steel Spool 3" x 8" Tri-Clamp Stainless Steel Spool 3" x 10" Tri-Clamp Stainless Steel Spool 3" x 12" Tri-Clamp Stainless Steel Spool 3" x 18" Tri-Clamp Stainless Steel Spool 3" x 24" Tri-Clamp Stainless Steel Spool 3"x 36" Tri-Clamp Stainless Steel Spool 3" x 48" Tri-Clamp Stainless Steel Spool   Specifications Tri-Clamp Size 3" Material 316 Stainless Steel Standard 3A High Polish Spool OD 3" Spool ID 2.87" Flange OD 3.579" Bead Center 3.281   OD = Outer Dimension   ID = Inner Dimension   Disclaimer to Customer:   User assumes all responsibility and risks of the system for all Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractors. They DO NOT come with a standard 1 year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.   Material Capacity Cylinder Volume Radius (in) 1.5" 2" 3" 4" 6" 8" 10" 12" Length (in) Volume (in3) Select Material Butane ISO-Butane Propane How Much Will Fit in Cylinder FormulaVolume x Weight of Water x Specific Gravity ConstantsWeight of Water = 0.0360 (lbs / in3)Specific Gravity of = Lbs. of : Recommended: Account for an 80% fill to avoid a hydraulic lock  How Much Material Will Fit in the Cylinder Volume Packing Density (g) 2.5 3 3.5 4.3 Grams of Material Lbs. of Material Cans of Butane Cans of Butane by Size Pounds of Butane mL fl oz lbs # of Cans 420 14.2 300 10.1 200 6.7 150 5.07

    $9.00 - $17.00

  • Stainless Steel Tri-Clamp Hopper Shop All Categories BVV 6" x 1.5" Tri-Clamp

    Stainless Steel Tri-Clamp Hopper

    The Triclamp / Tri Clover hopper can be attached to a material column to assist in packing the column with material. The Hopper has no tri clamp ferrule on the larger end and is made out of sanitary 304 stainless steel.

    $130.00 - $150.00

  • 3" Tri-Clamp x (2) 1/4" FNPT Shop All Categories BVV

    3" Tri-Clamp x (2) 1/4" FNPT

    3" Tri-Clamp/ Tri Clover x (2) 1/4" FNPT These End Caps come with Two 1/4"-18 FNPT Threaded connection welded to the end cap with a sanitary weld. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid.   Specifications Material: 304 Stainless Steel Connection Type: Tri-Clamp 1/4" - 18 FNPT Standard: 3A Sizes Available: 3" BVV™ 3" Tri-Clamp x (2) 1/4" FNPT - Drawing   BVV™ 3" Tri-Clamp x (2) 1/4" FNPT - End Cap Chart  

    $36.00

  • 10" x (3) 1.5" x (2)1/4" FNPT Tri-clamp Endcap Shop All Categories BVV

    10" x (3) 1.5" x (2)1/4" FNPT Tri-clamp Endcap

    10" x (3) 1.5" x (2)1/4" FNPT Tri-clamp/ Tri Clover  Endcap This End Cap come with Two 1/4"-18 FNPT Threaded connection and Three 1.5" Tri-Clamp ferrule welded to the end cap with a sanitary weld with a 0.5" Tube Extension center ferrule Below the Lid. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 1.5" Tri-Clamp Connection. These 5 connections are welded on a 10" Tri-Clamp End Cap.   Specifications Material: 304 Stainless Steel Connection Type: 1.5" Tri-Clamp - 0.5" Tube Extension on center ferrule Below Lid 10" Tri-Clamp 1/4" - 18 FNPT Standard: 3A BVV™ 10" x (3) 1.5" x (2)1/4" FNPT Tri-clamp Endcap - Drawing   BVV™ 10" x (3) 1.5" x (2)1/4" FNPT Tri-clamp Endcap - End Cap Chart  

    $195.00

  • 8" x (3) 1.5" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid Shop All Categories BVV

    8" x (3) 1.5" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid

    8" x (3) 1.5" Tri-Clamp Tri Clover x (4) 1/4" FNPT Hemispherical Lid Our Tri-Clamp Hemisperical Lid delivers superior rating performance and is commonly found in systems operating over 100 PSI. This End Cap comes with Four 1/4"-18 FNPT Threaded connection and Three 1.5" Tri-Clamp ferrule welded to the end cap with a 3" Tube Extension Below the Lid.  The tube extension is designed to keep extracts from dripping on the inside of the lid, to minimize cleanup and maximize yield. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 1.5" Tri-Clamp Connection. These 7 connections are welded on a 8" Hemispherical Tri-Clamp End Cap. Specifications: Material: 304 Stainless Steel Connection Types: 1.5" Tri-Clamp - 3" Tube Extension Below Lid on Center Tri-Clamp Port 8" Tri-Clamp 1/4" - 18 FNPT Standard: 3A BVV™ 8" x (3) 1.5" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid - Drawing   BVV™ 8" x (3) 1.5" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid - End Cap Chart      

    $185.00

  • 4" Tri-Clamp x (2) 1/4" FNPT w/ Showerhead Shop All Categories BVV

    4" Tri-Clamp x (2) 1/4" FNPT w/ Showerhead

    4" Tri-Clamp/ Tri Cover x (2) 1/4" FNPT w/ Showerhead These End Caps come with Two 1/4"-18 FNPT Threaded connection welded to the end cap with a sanitary weld. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid. Shower Head End Caps help disperse solvent input into a system which creates better material saturation when flooding a material column. This helps to prevent channeling, ensuring all the material is saturated.     Specifications Material: 304 Stainless Steel Connection Type: Tri-Clamp 1/4" - 18 FNPT Standard: 3A Sizes Available: 4"

    $66.00

  • 8" X (3) 1.5" X (2) 1/4" FNPT Tri-Clamp Endcap Shop All Categories BVV

    8" X (3) 1.5" X (2) 1/4" FNPT Tri-Clamp Endcap

    8" X (3) 1.5" X (2) 1/4" FNPT Tri-Clamp Tri Clover Endcap This End Cap come with Two 1/4"-18 FNPT Threaded connection and Three 1.5" Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 0.5" Tube Extension on the center 1.5" ferrule Below the Lid. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 1.5" Tri-Clamp Connection. These 5 connections are welded on an 8" Tri-Clamp End Cap.     Specifications Material: 304 Stainless Steel Connection Type: 1.5" Tri-Clamp - 0.5" Tube Extensionon center ferrule Below Lid 8" Tri-Clamp 1/4" - 18 FNPT Standard: 3A BVV™ 8" X (3) 1.5" X (2) 1/4" FNPT Tri-Clamp Endcap - Drawing   BVV™ 8" X (3) 1.5" X (2) 1/4" FNPT Tri-Clamp Endcap - End Cap Chart  

    $205.00

  • Triclamp Spool x 3" Length x 1/4" Female NPT Shop All Categories BVV 1.5" Tri-Clamp

    Triclamp Spool x 3" Length x 1/4" Female NPT

    Specifications: 304 Grade Stainless Steel w/ High Polish interior Fits 1.5" or 2" Triclamp 1/4" Female NPT Port 3" Tall   Disclaimer: All Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractor DO NOT come with a standard 1-year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.User assumes all responsibility and risks of the system" BVV™ Triclamp Spool x 3" Length x 1/4" Female NPT - Drawing

  • 3" Tri-Clamp x (2) 1/4" FNPT Ports w/ Shower Head Shop All Categories BVV

    3" Tri-Clamp x (2) 1/4" FNPT Ports w/ Shower Head

    3" Tri-Clamp/ Tri Clover x (2) 1/4" FNPT Ports w/ Shower Head These End Caps come with Two 1/4"-18 FNPT Threaded connection welded to the end cap with a sanitary weld. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid. Stainless steel tri-clamp fittings are the most popular style of process line equipment used within the industrial, food, beverage, and pharmaceutical industries.  Shower Head End Caps help disperse solvent input into a system, which creates better material saturation when flooding a material column. This helps to prevent channeling, ensuring all the material is saturated. Quickly create a leak-proof connection allowing easy assembly or disassembly for routine maintenance and inspection.   Specifications Material: 304 Stainless Steel Connection Type: Tri-Clamp 1/4" - 18 FNPT Standard: 3A Sizes Available: 3"

    $40.00

  • Sale -25% Triclamp / Tri Clover T Shop All Categories BVV 1" Tri-Clamp

    Triclamp / Tri Clover T

    Specifications: 304 Grade Stainless Steel w/ High Polish interior Unique T Style Connection  Note: 1" and 1.5" use the same size Tri-Clamp connection   Disclaimer: All Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractor DO NOT come with a standard 1 year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.User assumes all responsibility and risks of the system"

    $15.00 - $300.00

  • 10" Tri-Clamp x (2) 2" Tri-Clamp x 1.5" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid Shop All Categories BVV

    10" Tri-Clamp x (2) 2" Tri-Clamp x 1.5" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid

    10" Tri-Clamp/ Tri Clover x (2) 2" Tri-Clamp x 1.5" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid This End Cap comes with Four 1/4"-18 FNPT Threaded connection and One 1.5" Tri-Clamp ferrule and Two 2" Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 1.5" Tri-Clamp Connection. These 7 connections are welded on a 10" Hemispherical Tri-Clamp End Cap.     Specifications Material: 304 Stainless Steel Connection Type: 1.5" Tri-Clamp - 3" Tube Extension Below Lid on Center Tri-Clamp Port 2" Tri-Clamp 10" Tri-Clamp 1/4" - 18 FNPT Standard: 3A BVV™ 10" Tri-Clamp x (2) 2" Tri-Clamp x 1.5" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid - Drawing   BVV™ 10" Tri-Clamp x (2) 2" Tri-Clamp x 1.5" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid - End Cap Chart

    $260.00

  • 6" Tri-Clamp Endcap w/ (4) 1/4" FNPT Ports Shop All Categories BVV

    6" Tri-Clamp Endcap w/ (4) 1/4" FNPT Ports

    6" Tri-Clamp Endcap w/ (4) 1/4" FNPT Ports     These End Caps come with four 1/4"-18 FNPT Threaded connections welded to the end cap with a sanitary weld. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid.   Specification Material: 304 Stainless Steel Connection Type: Tri-Clamp 1/4" - 18 FNPT Standard: 3A Sizes Available: 6" BVV™ 6" Tri-Clamp Endcap w/ (4) 1/4" FNPT Ports - Drawing   BVV™ 6" Tri-Clamp Endcap w/ (4) 1/4" FNPT Ports - End Cap Chart  

    $110.00 - $125.00

  • Triclamp Spool x 3" Length x (2)1/4" Female NPT Shop All Categories BVV 1.5" Tri-Clamp

    Triclamp Spool x 3" Length x (2)1/4" Female NPT

    Specifications: 304 Grade Stainless Steel w/ High Polish interior Fits 1.5" or 2" Triclamp / Tri Clover (2)1/4" Female NPT Port 3" Tall   Disclaimer: All Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractor DO NOT come with a standard 1-year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.User assumes all responsibility and risks of the system"

    $28.00 - $35.00

  • 4 Inch Stainless Steel Buchner Funnel Shop All Categories BVV

    4" Stainless Steel Buchner Funnel

    4 Inch Stainless Steel Buchner Funnel 4” Buchner Funnel Kit:  This buchner funnel kit adapts to any vessel with a 24/40 joint. The included adapter makes it possible to pull vacuum and use large vessels as a collection. Max internal volume of the buchner funnel is 0.82L, but can be adapted with a larger spool for higher capacity.   This kit features: 4” x 4” 304SS spool with a capacity of 0.82L 4” Tri-Clamp Single Hinge Clamp 4”x1.5” 304SS Hemispherical Reducer 1.5” Tri-Clamp Double Hinged Clamp 4” 5 Micron 304SS Sintered Disc Filter 4” 304SS Filter Plate V2 1.5”x24/40 304SS Adapter 24/40 Glass Inlet Straight Adapter with hose connection   Recommended items: 110MM sized filter paper, 24/40 jointed glass conical flask.  For additional information or questions regarding this kit contact our customer support line.

    $310.00

  • Tri Clamp / Tri Clover U-Bend Shop All Categories BVV 2" Tri-Clamp

    Tri Clamp / Tri Clover U-Bend

    Tri Clamp / Tri Clover U-Bend   Tri-Clamp / Tri Clover connection U-Bend made out of 304 sanitary stainless steel allows the user to make a 180 degree connection with their system and redirect flow as needed: Tri-Clamp / Tri-Clover Sizes Available: 1" (Fits 1.5" Tri-Clamp) 1.5" 2" 3" 4" 6"  

    $33.00 - $249.00

  • Triclamp Spool x 3" Length x 1/2" Male NPT x 1/4" Male NPT Shop All Categories BVV 1.5" Tri-Clamp

    Triclamp Spool x 3" Length x 1/2" Male NPT x 1/4" Male NPT

    This is a sanitary spool that is sure to make a great connection. This product is sure to prevent leaking and is extremely easy to clean. 1.5" OR 2" Triclamp / Tri Clover x 3" x 1/2" Male NPT x 1/4" Male NPT

    $30.00

  • 1.5" Tri-Clamp Cross Shop All Categories BVV

    1.5" Tri-Clamp Cross

    Specifications: 304 Grade Stainless Steel Fits 1.5" Tri-Clamp/ Tri Clover

    $40.00

  • 1.5" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner Shop All Categories BVV 24"

    1.5" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner

    1.5" Tri-Clamp Stainless Steel Braided Hose   These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications. They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE. The inner core is corrugated PTFE to optimize the flexibility, protected by a braided stainless steel outer sleeve. These hoses have 1.5" Tri Clamp flanges on each end. ***Note: Do not exceed the specified hose bend radius or the inner PTFE liner will kink and the hose integrity will become compromised and should not be used. The 24" version can only bend 90 degrees.   Specifications: Connection Type(s): 1.5" Tri-Clamp Liner Material PTFE (Teflon) Braid Material 304 Stainless Steel Flange Material 304 Stainless Steel Temperature Rating -65° to 450°F Pressure Rating 580 PSI Chemical Resistance Excellent Bend Radius (24" Length) 13"  (48", 72", 96" Length) 5.5"

    $200.00 - $350.00

  • 45° Tri-Clamp 316 Stainless Steel New Products BVV 1-inch

    45° Tri-Clamp 316 Stainless Steel

    45° Tri-Clamp / Tri Clover 316 Stainless Steel  Specification Material 316 Stainless Steel Connection Type Tri-Clamp

    $7.00 - $10.00

  • Sale -20% 90° Tri-Clamp Bend 316 Stainless Steel New Products BVV 1.5-inch

    90° Tri-Clamp Bend 316 Stainless Steel

    Tri-Clamp / Tri Clover 90° 316 Bend Stainless Steel    Specification Material 316 Stainless Steel Connection Type Tri-Clamp

    $44.00$35.00

  • Triclamp / Tri Clover Y Shop All Categories BVV 1" Tri-Clamp

    Triclamp / Tri Clover Y

    Specifications: 304 Grade Stainless Steel w/ High Polish interior Fits 1" or 1.5" Triclamp Unique Y Connection Disclaimer: All Stainless Steel Parts bought seperately to piece together a Closed Loop, Closed Column, or Open Blast Extractor DO NOT come with a standard 1 year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.User assumes all responsibility and risks of the system"

    $23.00 - $32.00

  • 12" x (3) 2" x (2) 1/4 FNPT Endcap with Diptube Shop All Categories BVV

    12" x (3) 2" x (2) 1/4 FNPT Endcap with Diptube

    12" x (3) 2" x (2) 1/4 FNPT Endcap with diptube This End Cap come with a 11-5/16" long diptube, Two 1/4"-18 FNPT Threaded connection and Three 2" Tri-Clamp/ Tri Clover ferrule welded to the end cap with a sanitary weld with a 0.5" Tube Extension on center ferrule Below the Lid. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 2" Tri-Clamp Connection. These 5 connections are welded on a 12" Tri-Clamp End Cap.   Specification Material: 304 Stainless Steel Connection Type: 2" Tri-Clamp - 0.5" Tube Extension on center ferrule Below Lid 11-5/16" Diptube 12" Tri-Clamp 1/4" - 18 FNPT Standard: 3A

    $320.00

  • 6" x 4" x 3" x (2) 1/4" FNPT Tri-Clamp Skylight Shop All Categories BVV

    6" x 4" x 3" x (2) 1/4" FNPT Tri-Clamp Skylight

    Specifications: 304 Grade Stainless Steel Reducer 'Skylight' w/ High Polish interior 6" Triclamp x 4" Triclamp x 3" Triclamp (Can be used as viewport to see inside) x (2)1/4" FNPT 7" Tall

    $220.00

  • Jacketed Sucker Pot with Ring Stand Shop All Categories BVV

    Jacketed Sucker Pot with Ring Stand

    Jacketed Sucker Pot with Ring Stand  This jacketed sucker pot works perfectly as a collection base for extracted oil and easy discharge or as a storage vessel for distillate dispensing. Both of these applications are made easier with the use of a heater running through the jacket.  Connections: -Top: 6" Tri-Clamp -Bottom: 1/4" FNPT -Jacket: 1/4" FNPT (2x ports)

    $600.00

  • 12" x 12" Hemi Lid with Coil V1 Shop All Categories BVV

    12" x 12" Hemi Lid with Coil V1

    12" x 12" Hemi Lid with Coil V1 This 12" Hemi Lid has a built in coil that can be used with a heated circulator to assist with internal temperature control during the recovery process. By using this coil to directly heat the solution within the extractor base, you are able to increase recovery speeds over using a jacketed vessel alone. The coil will not touch the bottom of the base and overheat the oil after all the solvent has been removed. This hemi lid must be used with our 1200X12B for proper fitment.  BVV™ 12" x 12" Hemi Lid with Coil V1 - Drawing

    $525.00

  • Coil for 6" x 24" Spool - 3/8" Tubing Shop All Categories BVV

    Coil for 6" x 24" Spool - 3/8" Tubing

    Column cooling coil to fit a 6x24" spool. The lid connections are 1.5" tri-clamp, and 2x 1/2" NPT. The cooling coil connections are 1/2" NPT in and out. The coil extends 23.5" below the tri clamp lid.

    $325.00

  • 12" x 12" Hemi Lid with Coil V2 Shop All Categories BVV

    12" x 12" Hemi Lid with Coil V2

    12" x 12" Hemi Lid with Coil V2 This 12" Hemi Lid has a built in coil that can be used with a heated circulator to assist with internal temperature control during the recovery process. This hemi lid must be used with our 1200X12S and 1200FJS for proper fitment.    PDF DRAWING 

    $500.00

  • BVV Vacuum Jacket Assembly New Products BVV

    BVV Vacuum Jacket Assembly

    This vacuum jacket assembly is pre-assembled to fit on BVV Jacketed Stainless Steel tanks to allow users to create a vacuum jacket around the tank increasing the insulation of the stainless steel LP tank. This assembly comes with pre-taped 1/2" MNPT fitting on the main assembly with a compound gauge and 1/4" 37 JIC flare and BVV butterfly valve. It also comes with a 1/2" MNPT plug for the other port on the tank.

    $55.00

  • 7mm Stainless Steel Rods x 6in Shop All Categories BVV

    7mm Stainless Steel Rods x 6in

    7mm Stainless Steel Rods x 6in Stainless Steel rods 6" in length to place inside the tubes of a tube in the shell heat exchanger. This will help to restrict flow and increase the contact of the liquid passing through to the outer wall.

    $20.00

  • 5/16 USS Flat Washer Shop All Categories BVV

    5/16 USS Flat Washer

    5/16 USS Flat Washer 5/16 replacement washer for vacuum chamber bulkheads made out of metal.

    $0.50

  • BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid New Products BVV

    BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid

    BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid This End Cap comes with (4) Compression connections and (2) 1.5" and (1) Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid. They allow the user to adapt and connect a tube stub connection to the (1) 1/4", (2) 3/8", and (1) 1/2" port on a Tri-Clamp lid and the Tri-Clamp Connections. These 7 connections are welded on a 10" Hemispherical Tri-Clamp End Cap.   Specifications Material: 304 Stainless Steel Connection Types: (2) 2" and (1) 1.5" Tri-Clamp with 3" Tube Extension Below Lid on Center Tri-Clamp Port 10" Tri-Clamp (1)1/4", (2) 3/8" and (1)1/2" Female Compression Connections Standard: 3A

    $365.00

  • Side Mount Tri-Clamp Filter Strainer Shop All Categories BVV

    Side Mount Tri-Clamp Filter Strainer

    Side Mount Tri-Clamp Filter Strainer Tri Clamp strainers are used for filtration of solids from fluid process flows. It is recommended that a strainer be placed before a pump when emptying a centrifuge and the like to not allow large solids to enter and damage a pump. Side Mount Inline Strainers Tri Clamp inline strainers mount similar to a spool or elbow with both ends clamped into a tri-clamp fitting. The side mount strainer has a unique characteristic, it can be emptied while still attached just by removing the internal basket as long as it is correctly mounted. Liquid should flow in through the side port and out through the bottom port.      

    $215.00

  • Sale -22% 8" Hemispherical End Cap with Coil Shop All Categories BVV used with 150L-COL

    8" Hemispherical End Cap with Coil

    8" Hemispherical End Cap with Coil This 8" Hemispherical End Cap with Coil comes standard with our 150L Conical Reactor. Complete with 2X 1/2" NPT accessory ports, 2X 1/4" NPT accessory ports, 2X 1/2" NPT ports for the coil, and a single 1.5" tri-clamp top port. This versatile part is perfect for those looking to add extra surface area to their heating or cooling application.  From the 8" tri-clamp to the bottom of the coil measures 34".

    $450.00$350.00

  • HFS Open Sleeve Condenser 1.5 TC Shop All Categories HFS

    Open Sleeve Condenser 1.5 TC

    Open Sleeve Condenser 1.5 TC     Specifications Size 4x24in; 6x24in; 6x48in; 1.5TC. Quality Materials: The Open Sleeve Condenser is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using. Precise Design 4x24in is 4" diameter, 24" high interface. 6x24in is 6" diameter, 24" high interface. 6x48in is 6" diameter, 48" high interface. Convenient organization and storage: Packed in a carton with label

    $1,100.00 - $2,440.00

Login

Forgot your password?

Don't have an account yet?
Create account