Products
Jacketed Sucker Pot with Ring Stand
Jacketed Sucker Pot with Ring Stand This jacketed sucker pot works perfectly as a collection base for extracted oil and easy discharge or as a storage vessel for distillate dispensing. Both of these applications are made easier with the use of a heater running through the jacket. Connections: -Top: 6" Tri-Clamp -Bottom: 1/4" FNPT -Jacket: 1/4" FNPT (2x ports)
$600.00
JT Tray - 60mm Cones
JT Tray - 60mm Cones This tray top is an additional attachment sold separately. It measures to be 60mm to accommodate the JT sized cones. It still will do 169 cones in one run just like the other cone accessories we offer. All you need to do to use this accessory is swap it out with the original trays on the packing machine, load your cones, and start the packing process. You can also use additional accessories like the metering tray or the packing fingers to help make the process of packing your cones more efficient.
$375.00
Julabo Adapter 8891609 M16x1 f to NPT 1/2″ f
Julabo Adapter 8891609 M16x1 f to NPT 1/2″ f 2 Adapters M16x1 f. to NPT 1/2″ f.
$256.00
Julabo Adapter M16x1 f to NPT 1/2″
Julabo Adapter M16x1 f to NPT 1/2″ 2 Adapters M16x1 f. to NPT 1/2″ m.
$210.00
Julabo C2 Thermal Bath Fluid - 10 Liters
Julabo C2 Thermal Bath Fluid JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for best results in temperature control. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are specifically matched with each JULABO temperature control unit. C2 Thermal Bath Fluid Product Data Sheet C2 Thermal Bath Fluid SDS JULABO Thermal bath fluids have been carefully selected and are optimized for maximum performance with JULABO instruments. Benefits Low toxicity Low viscosity High stability Minimum odor Good heat conductivity Low corrosion tendency Wide temperature ranges Technical Data Order no. 10 liters 8891400 Working temperature (°C) -90...+60 Flash point (°C) > +75 Fire point (°C) > +430 Viscosity (kinematic at 20 °C in mm²/s) 2 Density (at 20 °C in g/cm³) 0.873 Pour point (°C) -120 Boiling point (°C) 229 Ignition temperature (°C) 430 Color clear
$1,668.00
Julabo C5 Thermal Bath Fluid - 10 Liters
Julabo C5 Thermal Bath Fluid JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for best results in temperature control. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are specifically matched with each JULABO temperature control unit. C5 Thermal Bath Fluid SDS C5 Thermal Bath Fluid Product Data Sheet JULABO Thermal bath fluids have been carefully selected and are optimized for maximum performance with JULABO instruments. Benefits Low toxicity Low viscosity High stability Minimum odor Good heat conductivity Low corrosion tendency Wide temperature ranges Technical Data Order no. 10 liters 8891402 Working temperature (°C) -60...+110 Flash point (°C) > +135 Fire point (°C) > +443 Viscosity (kinematic at 20 °C in mm²/s) 5 Density (at 20 °C in g/cm³) 0.918 Pour point (°C) -100 Boiling point (°C) >205 Ignition temperature (°C) 443 Color clear
$2,114.00
Julabo CORIO CD-200F
Julabo CORIO CD-200F Call for lead time Refrigerated / Heating Circulators of the new CORIO series distinguish themselves with a great price-to-performance ratio. They are ideal for all standard tasks and routine work in laboratories and industry. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over (internal and external circulation) External pump connections (M16x1) USB connection Space-saving cooling coil design yields more usable space in the bath tank Bath lid and drain tap included Removable ventilation grid Refrigeration unit without side vents Class III (FL) according to DIN 12876-1 Specifications Order No. 9012701 Model series CORIO Category Refrigerated - Heating Circulators Working temperature range (°C) -20 ... +150 Temperature control PID Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Cooling capacity (Medium Ethanol) °C 20 0 -20kW 0.22 0.17 0.06 Pump capacity flow rate (l/min) 15 Pump capacity flow pressure (psi) 5.08 Bath opening / bath depth (W x L / D inch) 5.1 x 5.9 / 5.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 3 ... 4 Refrigerant stage 1 R134a Filling volume refrigerant stage 1 (g) 70 Global Warming Potential for 1430 Carbon dioxide equivalent stage 1 (t) 0.1 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 9.1 x 15.4 x 25,6 Weight (LBS) 57.4 Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Bath tank Stainless steel Bath cover integrated Cooling of compressor Air Product Data Sheet Manual
$7,513.00
Julabo CORIO CD-BC6 Heating Circulator - New In Stock
Julabo CORIO CD-BC6 Heating Circulator The new generation of laboratory circulators for routine work and standard tasks CORIO™ heating circulators feature professional technology for high standards. These units facilitate internal temperature control in the bath tank or control of externally connected applications. Your advantages Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over between internal and external circulation USB connection High-quality bath tanks made of stainless steel with bath lid and drain tap Integrated cooling coil for counter-cooling Technical Data Order No. 9012506 Model series CORIO Category Heating Circulators Working temperature range (°C) +20 ... +150 Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Pump capacity flow rate (l/min) 15 Pump capacity flow pressure (psi) 5.08 Bath opening/bath depth (W x L / D inch) 5.1 x 5.9 / 7.8 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (litres) 4.5 ... 6 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 9.5 x 17.4 x 18.5 Weight (LBS) 22.1 Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia.(pump connections M16x1 male) Cooling Coil integrated Bath tank Stainless steel Bath cover integrated
$4,901.00$2,000.00
Julabo CORIO CP-1000F
Julabo CORIO CP-1000F Call for lead time Refrigerated Circulators from the CORIO CP range are suitable for applications with a temperature range up to +200°C. The enhanced pump performance ensures they are suitable for easy temperature control tasks in combination with external applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over (internal and external circulation) External pump connections (M16x1) USB & RS232 connection Space-saving cooling coil design yields more usable space in the bath tank Bath lid and drain tap included Removable ventilation grid Refrigeration unit without side vents Class III (FL) according to DIN 12876-1 Technical Data Order No. 9013707 Model series CORIO Category Refrigerated - Heating Circulators Working temperature range (°C) -50 ... +200 Temperature control PID Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Cooling capacity (Medium Ethanol) °C 20 10 0 -10 -20 -30 -40kW 1 1 0.9 0. 73 0.5 0.3 0.13 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 7.1 x 5.1 / 5.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 5 ... 7.5 Refrigerant stage 1 R449a Filling volume refrigerant stage 1 (g) 175 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 16.5 x 19.3 x 27.6 Weight (LBS) 113.5 Included with each unit 2 Schlaucholiven passend für Schlauch 8 und 12 mm l.W. (Pump enanschlüsse mit M16x1 Außengewinde) Bath tank Stainless steel Bath cover integrated Cooling of compressor Air Manual
$14,941.00
Julabo CORIO CP-600F
Julabo CORIO CP-600FCall for lead time Refrigerated Circulators from the CORIO CP range are suitable for applications with a temperature range up to +200°C. The enhanced pump performance ensures they are suitable for easy temperature control tasks in combination with external applications.Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over (internal and external circulation) External pump connections (M16x1) USB & RS232 connection Space-saving cooling coil design yields more usable space in the bath tank Bath lid and drain tap included Removable ventilation grid Refrigeration unit without side vents Class III (FL) according to DIN 12876-1 Technical Data Order No. 9013704 Model series CORIO Category Refrigerated - Heating Circulators Working temperature range (°C) -35 ... +200 Temperature control PID Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Cooling capacity (Medium Ethanol) °C 200 20 10 0 -10 -20 -30 kW 0.6 0.6 0.54 0.5 0.33 0.19 0.07 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 8.7 x 5.9 / 5.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 5 ... 7.5 Refrigerant stage 1 R449a Filling volume refrigerant stage 1 (g) 200 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 13 x 18.5 x 27.2 Weight (LBS) 78.7 Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Bath tank Stainless steel Bath cover integrated Cooling of compressor Air Manual
$11,348.00
Julabo CORIO CP-BC12
Julabo CORIO CP-BC12 Call for lead time CORIO heating circulators feature professional technology for high standards. These units facilitate internal temperature control in the bath tank or control of externally connected applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over between internal and external circulation USB & RS232 connection High-quality bath tanks made of stainless steel with bath lid and drain tap Integrated cooling coil for counter-cooling Technical Data Order No. 9013512 Model series CORIO Category Heating Circulators Working temperature range (°C) +20 ... +200 Temperature stability (°C) ±0.02 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 8.7 x 5.9 / 7.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 8.5 ... 12 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 29.9 x 52 Weight (LBS) 13 x 19.3 x 18.5 Description Built-in cooling coil for tap water connection for temperature applications below or near ambient temperatures are integrated. Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Cooling coil integrated Bath tank Stainless steel Bath cover integrated Manual
$5,755.00
Julabo CORIO CP-BC26
Julabo CORIO CP-BC26 Call for lead time CORIO heating circulators feature professional technology for high standards. These units facilitate internal temperature control in the bath tank or control of externally connected applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over between internal and external circulation USB & RS232 connection High-quality bath tanks made of stainless steel with bath lid and drain tap Integrated cooling coil for counter-cooling Technical Data Order No. 9013526 Model series CORIO Category Heating Circulators Working temperature range (°C) +20 ... +200 Temperature stability (°C) ±0.02 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 10.2 x 13.8 /7.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 19 ... 26 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 15.4 x 24.4 x 18.9 Weight (LBS) 41.9 Description Eine Kühlschlange für Arbeiten unterhalb bzw. nahe der Umgebungstemperatur ist integriert. Included with each unit 2 Schlaucholiven passend für Schlauch 8 und 12 mm l.W. (Pumpenanschlüsse mit M16x1 Außengewinde) Cooling coil integrated Bath tank Stainless steel Bath cover integrated Manual
$6,391.00
Julabo FL11006
FL11006 JULABO FL Series Recirculating Cooler / Chillers for routine laboratory cooling applications. PID temperature control provides ±0.5°C stability. Proportional cooling control adjusts the cooling power to the load of the application and saves energy. Units incorporate RS232 interface and alarm output for PC integration and control. Models include a splash-proof membrane keypad with LED temperature display. Easy filling / draining with a fill level indicator and overflow port on the back. Units constructed of stainless steel and high grade plastic with stainless steel internal tank. Centrifugal pressure pump provides circulation to external application. Air and water-cooled versions. Units with 3 and 6 bar pump include internal by-pass for pressure adjustment. Analog pressure gauge on front of the unit displays circuit pressure. May be used with water, water/glycol mixtures and silicone fluids. The FL300, FL601, FL1201, FL1701, FLW1701 come with 8 and 12 mm hose barbs. The FLxxx3 models come with 3/4″ hose barbs. The FLxxx6 models come with 1″ hose barbs.Included with each unit: 2 barbed fittings for tubing1 l.W. (pump connections with G1 1/4 male) Product Data Sheet Product Manual Key Benefits Ergonomic design and easy operation Splash-proof keypad Large, bright LED display Reliable Microprocessor PID temperature control Filling level indicator Powerful immersion pumps, suitable for continuous operation Permissible temperature in return line +80°C Easy filling from the top with hinged protective lid Low liquid level protection with optical and audible alarm signal Integrated stainless steel bath tanks Removable venting grid for cleaning of the condenser Front drain No side vents RS232 interface for PC-connection IP class according to IEC 60529: 21 Alarm output, potential-free change-over contact (max. 30 VA) Pressure Indicator By-pass valve to adjust pump pressure Specifications Cooling Capacity °C 20 0 -10 -20 kW 11 7.5 5 3 Working Temp Range (°C) -20 … +40 Pump Capacity Flow Rate (l/min) 60 Heating or Cooling Capability Cooling only Pump Capacity Flow Pressure (psi) 7.25…87.02 External Devices Remote Control Dimensions W x L x H (in) 30.7 x 33.5 x 58.3 Fluid Type Silicone, Water, Other Weight (lbs) 547 Power Options 230 V / 3 Ph. / 60 Hz, 400 V / 3 Ph. / 50 Hz
$34,585.00 - $37,270.00
Julabo FL1201
Julabo FL1201 The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Specifications Shipping Weight 680 lbs Shipping Dimensions 42 x 42 x 64 in Order No. 9661012 Model Series FL Series Working Temperature Range (°C) -20° to +40° Temperature Stability (°C) ±0.05 Temperature Control PID temperature control Display Resolution 0.01 °C Temperature Display LED Cooling Capacity 0.3 kW @ 20 °C,0.6 kW @ -10 °C,0.9 kW @ 0 °C,1.2 kW @ 20 °C Pump capacity Flow Rate (l/min) 23 Pump Capacity Flow Pressure (psi) 14.5 Pump Connections M16x1 Filling Volume Liters 12 ...17 Refrigerant R404A Digital Interface RS232, Optional Profibus Ambient Temperature 5…40 °C Noise Level (dBA) 61 Classification Classification III (FL)according to DIN 12876-1 Included with 2 barbed fittings for tubing 8 and 12 mm inner dia. (pumpconnections M16x1 male) Cooling of Compressor Air Power requirement V / Hz / A 115/60/14 Cooling capacity °C 1.2kW (@ 20°C), 1kW (@ 10°C), 0.9kW (@ 0°C), 0.6kW (@-10°C), 0.3kW (@ -20°C) Alarm Signal acoustically & optical Temperature Selection / Display °C Volumetric Capacity Liters 12 ... 17 Outer dimensions W x L x H inch 19.7 x 29.9 x 25.2 Available Voltage Versions 115V / 60 Hz, 230 V / 50 Hz, 230 V / 60 Hz Other Characteristics Removable venting grid for convenient cleaning to maintain cooling performance. Characteristics / Display Easy to read: Large LED temperature display for actual value and setpoint(resolution 0.1 °C) Characteristics / Operation Simple and fast : Convenient 3-key setpoint adjustment (FLmodels) Characteristics / Temperature Control Precise: PID Temperature control with set control parameters, temperature stability ±0.02…±0.2 °C Characteristics / Refrigeration Technology Consistent cooling capacity: Easily removable venting gridfor quick and easy cleaning Characteristics / Technical Features Serial connection: RS232 interface for PC connection, e.g. data communication and recording of measured values
$12,120.00 - $13,874.00
Julabo FL1203
Julabo FL1203 Call for Lead Time The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Specifications Order No. 9663012 Model Series FL Series Working Temperature Range (°C) -20° to +40° Temperature Stability (°C) ±0.05 Display Resolution 0.01 °C Temperature Display LED Cooling Capacity °C 20 0 -10 -20kW 1.2 0.8 0.5 0.2 Pump capacity Flow Rate (l/min) 40 Pump Capacity Flow Pressure (psi) 7.25...43.51 Pump Connections G3/4" Barbed fittings diameter (inner dia. / mm) 3/4" Filling Volume Liters 12 ...17 Refrigerant stage 1 R452A Filling volume refrigerant stage 1 (g) 690 Global Warming Potential for 2140 Carbon dioxide equivalent stage 1 (t) 1.477 Digital Interface RS232, Optional Profibus Ambient Temperature 5…40 °C Dimensions W x L x H (inch) 19.7 x 29.9 x 25.2 Weight (LBS) 161 Noise Level (dBA) 61 Description Suitable fluids: water, water-glycol mixture, JULABO Thermal bath fluids Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G3/4" male) Cooling of Compressor Air Power requirement V / Hz / A 230/60/11 Additional voltage versions available Available Voltage Versions -230 V / 50 Hz-230 V / 60 Hz Characteristics / Display Easy to read: Large LED temperature display for actual value and setpoint(resolution 0.1 °C)
$13,972.00 - $15,689.00
Julabo FL20006
Julabo FL20006 Call for Lead Time The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Specifications Order No. 9666200 Model Series FL Series Working Temperature Range (°C) -25° to +40° Temperature Stability (°C) ±0.05 Temperature Control PID temperature control Display Resolution 0.01 °C Temperature Display LED Cooling Capacity 10 kW @ 0 °C,2.5 kW @ 20 °C,20 kW @ 20 °C,6 kW @ -10 °C Pump capacity Flow Rate (l/min) 80 Pump Capacity Flow Pressure (psi) 11.6...87.0 Pump Connections G1 1/4-inch Filling Volume Liters 15 to 37 Barbed fittings diameter (inner dia. / mm) 1-inch Pressure Indicator (psi) 0...87 Filling Volume Liters 15...37 Refrigerant R404A Digital Interface RS232, Optional Profibus Ambient Temperature 5…40 °C Noise Level (dBA) 73 Classification Classification III (FL)according to DIN 12876-1 Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G3/4"male) Cooling of Compressor Air Power requirement V / Hz / A 3x 230/60/36 Cooling capacity °C 20kW (@ 20°C), 15kW (@ 10°C), 10kW (@ 0°C), 6kW (@ -10°C), 2.5kW (@ -20°C) Alarm Signal acoustically & optical Temperature Selection / Display °C Volumetric Capacity Liters 15...37 Outer dimensions W x L x H inch 37.4 x 45.3 x 63.4 Available Voltage Versions 230 V / 50 Hz, 230 V / 60 Hz Other Characteristics Removable venting grid for convenient cleaning to maintain cooling performance. Internal pump by-pass valve to regulate pressure. Characteristics / Display Easy to read: Large LED temperature display for actual value and setpoint(resolution 0.1 °C) Characteristics / Operation Simple and fast : Convenient 3-key setpoint adjustment (FLmodels) Characteristics / Temperature Control Precise: PID Temperature control with set control parameters, temperature stability ±0.02…±0.2 °C Characteristics / Refrigeration Technology Consistent cooling capacity: Easily removable venting gridfor quick and easy cleaning Characteristics / Technical Features Serial connection: RS232 interface for PC connection, e.g. data communication and recording of measured values
$52,850.00 - $56,098.00
Julabo FL300
Julabo FL300 The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Specifications Order No. 9660003 Model Series FL Series Category Recirculating Coolers Working Temperature Range (°C) -20 ... +40 Temperature Stability (°C) ±0.05 Display Resolution 0.01 °C Temperature Display LED Cooling capacity (Medium Ethanol) °C 20 0 -10 -20kW 0.3 0.2 0.15 0.1 Pump capacity Flow Rate (l/min) 15 Pump Capacity Flow Pressure (psi) 5.08 Pump Connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling Volume Liters 3 ... 4.5 Refrigerant stage 1 R134a Filling volume refrigerant stage 1 (g) 133 Global Warming Potential for 1430 Carbon dioxide equivalent stage 1 (t) 0.19 Digital Interface RS232, Optional Profibus Ambient Temperature 5...40 °C Dimensions W x L x H (inch) 9.8 x 19.7 x 23.6 Weight (LBS) 86 Noise Level (dBA) 55 Description Suitable fluids: water, water-glycol mixture, JULABO Thermal bath fluids Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G3/4" male) Cooling of Compressor Air Available Voltage Versions -115V/60HZ -230V/50HZ-230V/60HZ Product Data Sheet Manual
$8,324.00
Julabo FL4003
Julabo FL4003 The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Specifications Order No. 9663040 Model Series FL Series Category Recirculating Coolers Working Temperature Range (°C) -20 ... +40 Temperature Stability (°C) ±0.05 Display Resolution 0.01 °C Temperature Display LED Cooling capacity (Medium Ethanol) °C 20 0 -10 -20kW 4 2.4 1.5 0.65 Pump capacity Flow Rate (l/min) 40 Pump Capacity Flow Pressure (psi) 7.25...43.51 Pump Connections G3/4" Barbed fittings diameter (inner dia. / mm) 3/4" Filling Volume Liters 24 ... 30 Refrigerant stage 1 R452A Filling volume refrigerant stage 1 (g) 2220 Global Warming Potential for 2140 Carbon dioxide equivalent stage 1 (t) 4.751 Digital Interface RS232, Optional Profibus Ambient Temperature 5...40 °C Dimensions W x L x H (inch) 23.6 x 29.9 x 45.3 Weight (LBS) 271 Noise Level (dBA) 67 Description Suitable fluids: water, water-glycol mixture, JULABO Thermal bath fluids Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G3/4" male) Cooling of Compressor Air Available Voltage Versions -400 V / 3 Ph. / 50 Hz-230 V / 3 Ph. / 60 Hz Product Data Sheet Manual
$22,652.00 - $25,226.00
Julabo FL7006
Julabo FL7006 The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Key Benefits: Ergonomic design and easy operation Splash-proof keypad Large, bright LED display Reliable Microprocessor PID temperature control Filling level indicator Powerful immersion pumps, suitable for continuous operation Permissible temperature in return line +80°C Easy filling from the top with hinged protective lid Low liquid level protection with optical and audible alarm signal Integrated stainless steel bath tanks Removable venting grid for cleaning of the condenser Front drain No side vents RS232 interface for PC-connection IP class according to IEC 60529: 21 Alarm output, potential-free change-over contact (max. 30 VA) Pressure Indicator By-pass valve to adjust pump pressure Specifications Order No. 9666070 Model Series FL Series Working Temperature Range (°C) -20° to +40° Temperature Stability (°C) ±0.05 Temperature Control PID temperature control Display Resolution 0.01 °C Temperature Display LED Cooling Capacity °C 20 0 -10 -20 kW 7 5.1 3 1.55 Pump capacity Flow Rate (l/min) 60 Pump Capacity Flow Pressure (psi) 7.25...87.0 Pump Connections G1 1/4-inch Filling Volume Liters 39...47 Barbed fittings diameter (inner dia. / mm) 1-inch Refrigerant R404A Digital Interface RS232, Optional Profibus Ambient Temperature 5…40 °C Noise Level (dBA) 74 Classification Classification III (FL)according to DIN 12876-1 Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G1 1/4"male) Cooling of Compressor Air Power requirement V / Hz / A 3x 230/60/23 Cooling capacity °C 7kW (@ 20°C), 6.4kW (@ 10°C), 5.1kW (@ 0°C), 3kW (@ -10°C), 1.55kW (@ -20°C) Alarm Signal acoustically & optical Temperature Selection / Display °C Volumetric Capacity Liters 39...47 Outer dimensions W x L x H inch 30.7 x 33.5 x 58.3 Available Voltage Versions 230 V / 3 Ph. / 60 Hz, 400 V / 3Ph. / 50 Hz Other Characteristics Removable venting grid for convenient cleaning to maintain cooling performance. Internal pump by-pass valve to regulate pressure Characteristics / Display Easy to read: Large LED temperature display for actual value and setpoint(resolution 0.1 °C) Characteristics / Operation Simple and fast : Convenient 3-key setpoint adjustment (FLmodels) Characteristics / Temperature Control Precise: PID Temperature control with set control parameters, temperature stability ±0.02…±0.2 °C Characteristics / Refrigeration Technology Consistent cooling capacity: Easily removable venting gridfor quick and easy cleaning Characteristics / Technical Features Serial connection: RS232 interface for PC connection, e.g. data communication and recording of measured values
$31,306.00 - $34,679.00
Julabo PRESTO A30
Julabo PRESTO A30 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Specifications Shipping Weight 185 lbs Shipping Dimensions 32 x 24 x 40 in Order No. 9420300 Model Series PRESTO Working Temperature Range (°C) -30° … +250° Temperature Stability (°C) ±0.01 … ±0.05 Temperature Control ICC intelligent cascade control, TCF temperature control features, Absolute temperature calibration 1-point Display Resolution 0.01 °C Integrated Programmer 8×60 steps Temperature Display TFT Touchscreen Heating Capacity (kW) 2.3 Cooling Capacity °C 200 100 20 0 -10 -20 -30kW 0.5 0.5 0.5 0.4 0.3 0.2 0.05 Pump capacity Flow Rate (l/min) 25 Pump Capacity Flow Pressure (psi) 7.25 Pump Connections M24x1.5 Filling Volume Liters 2.4 (1.5 internal expansion) Refrigerant R507 External Pt100 integrated Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Ambient Temperature 5…40 °C Noise Level (dBA) 54 Classification Classification III (FL)according to DIN 12876-1 Analog Connection Input / Output Optional Cooling of Compressor 1-stage Air Filling Volume Expansion Vessel Liters 1.5 Power requirement V / Hz / A 208/60/14 Heaters 2.1kW @ 200V (2.7kW @ 230V) Alarm Signal acoustically & optical Temperature Selection / Display °C / °F Outer dimensions W x L x H inch 9.5×9.5×24 Available Voltage Versions 230V/50Hz 208V/60Hz 208V/60Hz (Canadian and US NRTL Certified) Other Characteristics GB version with 2100 W heater capacity / CH version with 1700 W heater capacity Characteristics / Display State-of-the-art display technology: TFT Display for comfortable user guidance, colored display of measurement values, graphs and control options, user-defined views Characteristics / Operation Convenience for several users: Administrator level for customizing instrument settings, user levels with limited permissions for fast and safe defined access, password protection, all levels adjusta, Instructions inside: Help menus and explanations in plain text for all control options, help messages and warning messages, Multilingual user guidance: Language selection for display of control options, notifications and warning messages via touchscreen, Optimal ease of use: Touch screen for direct operation via display Characteristics / Temperature Control For perfect results: Intelligent Cascade Control, automatic & self optimizing adjustment of PID control parameters, temperature stability ±0.01 °C … Characteristics / Refrigeration Technology 100 % Cooling capacity: Active Cooling Control for cooling available throughout the entire working temperature range, fast cool-down even at higher temperatures, Consistent cooling capacity: Easily removable venting grid for quick and easy cleaning, Energy saving cooling: Proportional cooling control for automatic adjustment of cooling power or temporary switch-off of compressor as needed to save up to 90 % energy in comparison to unregulated c
$25,042.00 - $26,927.00
Julabo PRESTO A40
Julabo PRESTO A40 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Specifications Shipping Weight 231 lbs Shipping Dimensions 40 x 24 x 40 in Order No. 9420401 Model Series PRESTO Working Temperature Range (°C) -40° to +250° Temperature Stability (°C) ±0.01 … ±0.05 Temperature Control ICC intelligent cascade control, TCF temperature controlfeatures, Absolute temperature calibration 1-point Display Resolution 0.01 °C Integrated Programmer 8 x 60 steps Temperature Display TFT Touchscreen Heating Capacity (kW) 2.3 Cooling Capacity °C 200 100 20 0 -20 -30 -40kW 1.2 1.2 1.2 0.9 0.6 0.3 0.1 Pump capacity Flow Rate (l/min) 16 to 40 Pump Capacity Flow Pressure (psi) 1.45 to 18.85 Pump Connections M24x1.5 Filling Volume Liters 3.5 (1.7 Internal Expansion) Refrigerant R507 External Pt100 integrated Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Ambient Temperature 5…40 °C Noise Level (dBA) 55 Classification Classification III (FL)according to DIN 12876-1 Analog Connection Input / Output Optional Cooling of Compressor 1-stage Air Filling Volume Expansion Vessel Liters 2.7 Power requirement V / Hz / A 208/60/15 Alarm Signal acoustically & optical Temperature Selection / Display °C / °F Outer dimensions W x L x H inch 12.7 x 22.9 x 26 Other Characteristics GB version with 1800 W heater Characteristics / Display State-of-the-art display technology: TFT Display for comfortable user guidance, colored display of
$34,412.00 - $36,354.00
Julabo PRESTO A45
Julabo PRESTO A45 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Key Benefits: For highly precise, external temperature applications Rapid heating and cooling Fast compensation of exothermic reaction Wide working temperature ranges without changing fluids Highest performance with small footprint Space-saving design optimizes space utilization in your lab NEW 5,7 industrial color TFT touch screen well-organized view of important information with unmatched, intuitive user friendliness Up to 3 user level with password management NEW USB (Host und Device) NEW Ethernet NEW SD-Card slot RS232 / optional RS485 / optional Profibus DP Stand-by input Filling system accessible from the top Removable venting grid for simplified removal of dust Specifications Shipping Weight 251 lbs Shipping Dimensions 40 x 24 x 40 in Order No. 9420452 Model Series PRESTO Working Temperature Range (°C) -45°...+250° Temperature Stability (°C) ±0.05 … ±0.1 Temperature Control ICC intelligent cascade control, TCF temperature controlfeatures, Absolute temperature calibration 1-point Display Resolution 0.01 °C Integrated Programmer 8 x 60 steps Temperature Display TFT Touchscreen Heating Capacity (kW) 2.3 Cooling Capacity Pump capacity Flow Rate (l/min) 35...76 Pump Capacity Flow Pressure (psi) 6.74 … 43.5 @ 208V, 6.74 Pump Connections M30x1.5 Filling Volume Liters 7.5 (7.5 internal expansion) Refrigerant R507 External Pt100 integrated Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Ambient Temperature 5…40 °C Noise Level (dBA) 69 Classification Classification III (FL)according to DIN 12876-1 Analog Connection Input / Output Optional Cooling of Compressor 1-stage Air Filling Volume Expansion Vessel Liters 7.5 Power requirement V / Hz / A 3x 208/60/23 Alarm Signal acoustically & optical Temperature Selection / Display °C / °F Outer dimensions W x L x H inch 20.9 x 26.2 x 49.6 Product Data Sheet
$58,238.00 - $60,179.00
Julabo PRESTO A45T
Julabo PRESTO A45T Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Specs-At-A-Glance Cooling Capacity °C 200 20 0 -10 -20 -30 -40 kW 3.4 3.5 3.3 2.6 1.8 1 0.3 Heating Capacity (kW) 5.5 @ 208V, 6 @ 230V, 6 @ 400V Heating or Cooling Capability Both Working Temp Range (°C) -45 … +250 Pump Capacity Flow Rate (l/min) 35 … 76 Pump Capacity Flow Pressure (psi) 6.74 … 43.5 @ 208V, 6.74 … 46.4 @ 230V, 6.74 … 46.4 @ 400V External Devices External Temp Probe, Remote Control Dimensions W x L x H (in) 20.9 x 26.2 x 49.6 Fluid Type Silicone, Fluorinert/Galden, Other Weight (lbs) 463
$62,717.00 - $64,659.00
Julabo PRESTO A80
Julabo PRESTO A80 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Key Benefits: For highly precise, external temperature applications Rapid heating and cooling Fast compensation of exothermic reaction Wide working temperature ranges without changing fluids Highest performance with small footprint Space-saving design optimizes space utilization in your lab NEW 5,7 industrial color TFT touch screen well-organized view of important information with unmatched, intuitive user friendliness Up to 3 user level with password management NEW USB (Host und Device) NEW Ethernet NEW SD-Card slot RS232 / optional RS485 / optional Profibus DP Stand-by input Filling system accessible from the top Removable venting grid for simplified removal of dust Specs-At-A-Glance Cooling Capacity °C 200 100 0 -20 -40 -60 -80 kW 1.2 1.1 1.2 1.1 1.1 0.65 0.1 Heating Capacity (kW) 10 @ 208V, 12 @ 230V, 12 @ 400V Heating or Cooling Capability Both Working Temp Range (°C) -45 … +250 Pump Capacity Flow Rate (l/min) 35 … 76 Pump Capacity Flow Pressure (psi) 6.74 … 43.5 @ 208V, 6.74 … 46.4 @ 230V, 6.74 … 46.4 @ 400V Filling Volume Liters 3.9 (1.7 internal expansion) Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Noise Level (dBA) 68 Power requirement V / Hz / A 208/60/15 Cooling of Compressor 2-stage Air External Devices External Temp Probe, Remote Control Dimensions W x L x H (in) 20.9 x 26.2 x 49.6 Fluid Type Silicone, Fluorinert/Galden, Other Weight (lbs) 463 Product Data Sheet
$57,344.00 - $59,151.00
Julabo PRESTO A85
Julabo PRESTO A85 Reactor temperature control, tests for all kinds of substances or temperature simulation – Presto A30 are made for highly precise temperature control and rapid temperature changes, providing large heating and cooling capacities covering a working temperature range from -92 °C to +250 °C. Highly efficient components allow extremely fast compensation of exothermic and endothermic reactions. Lab users benefit from high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature-control fluid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to the new PRESTO’s long service life. A special feature of the PRESTO is the integrated 5.7’’ industrial color touch screen. Key Benefits: For highly precise, external temperature applications Rapid heating and cooling Fast compensation of exothermic reaction Wide working temperature ranges without changing fluids Highest performance with small footprint Space-saving design optimizes space utilization in your lab NEW 5,7 industrial color TFT touch screen well-organized view of important information with unmatched, intuitive user friendliness Up to 3 user level with password management NEW USB (Host und Device) NEW Ethernet NEW SD-Card slot RS232 / optional RS485 / optional Profibus DP Stand-by input Filling system accessible from the top Removable venting grid for simplified removal of dust Specs-At-A-Glance Temperature Stability (°C) ±0.05 … ±0.1 Cooling Capacity °C 200 20 0 -20 -40 -60 -80 kW 2.8 2.5 2.4 2.4 2.4 2.2 0.4 Heating Capacity (kW) 6 @ 400V, 6 @ 230V, 5.5 @ 208V Heating or Cooling Capability Both Working Temp Range (°C) -85 … +250 Pump Capacity Flow Rate (l/min) 35 … 76 Pump Capacity Flow Pressure (psi) 6.96 … 46.42 @ 400V, 6.96 … 46.42 @ 230V, 6.96 … 43.51 @ 208V Filling Volume Liters 9.5 (7 internal expansion) Digital Interface RS232, Optional Profibus, SD memory card, USB, Ethernet, Modbus, Optional RS485 Noise Level (dBA) 69 Power requirement V / Hz / A 3x 208/60/30 Cooling of Compressor 2-stage Air External Devices External Temp Probe, Remote Control Dimensions W x L x H (in) 24.1 x 42.6 x 49.3 Fluid Type Silicone, Fluorinert/Galden, Other Weight (lbs) 805 Product Data Sheet
$97,370.00 - $99,711.00
Julabo Thermal C10
Julabo Thermal C10 JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for the best temperature control results. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are matched specifically with each JULABO temperature control unit. JULABO Thermal bath fluids have been carefully selected and optimized for maximum performance with JULABO instruments. Thermal C10 is a clear 10 cSt silicone fluid rated for use in open bath JULABO units with a working temperature range of -20…+160 °C. Care should be taken to observe atmospheric moisture condensation in the bath fluid with prolonged sub-ambient operation in humid environments. Water and silicone fluids are not miscible. Operation at the maximum temperature for heating applications will result in vapor formation. Vapor formation at elevated temperatures is a normal occurrence for silicone fluids. The upper temperature limit of the fluid is lower than the fluid flashpoint.
$1,596.00 - $3,170.00
Julabo Triple Insulated Metal Tubing -100°C to 350°C
Julabo Triple Insulated Metal Tubing -100°C to 350°C This flexible metal tubing can be bolted together with the circulator and the external system thus avoiding slipping. The integrated insulation avoids loss of performance. Triple insulated for wide temperature ranges. Connection size is a M16x1 female fitting on each end and comes in varying lengths from 0.5 to 3m long.
$619.00 - $1,827.00
Jump Start AccelaROOT 50-Cell Insert and Starter Plugs (no tray)
AccelaROOT Starter Plugs w/50 Cell InsertStart growing on a small scale, then watch your plants take root! The AccelaROOT 50-cell tray gives you up to 50 small "homes" for your seedlings and cuttings. This finely crafted tray is made to help you jump start growth. Once you've started to sprout, plugs come out of the tray cells easily to be transplanted into bigger pots or a garden setup, letting you start all over again—with the same tray. No more equipment to buy! Features Coir based blend with binding agent Unique drainage properties deters damping off Pre-moistened, pH-balanced peat plugs offer optimal air-to-water ratio Prevents overwatering, develops stronger roots for world-class yields Micro-air pocket development encourages dense feeder root production for explosive root growth No rooting hormone needed Plugs transplant directly into your garden Includes • 50 cell insert (tray not included)• 50 pH-balanced plugs Unique drainage properties deters damping off Pre-moistened, pH-balanced peat plugs offer optimal air-to-water ratio Prevents overwatering, develops stronger roots for world-class yields Micro-air pocket development encourages dense feeder root production for explosive root growth Plugs transplant directly into your garden
$16.95$16.77
KF Clamps
KF Clamps Clamp for standard High Vacuum flanges. Size Available: KF-16 KF-25 KF-40 KF-50
$17.50
KF Connection Braided Stainless Steel Bellow Hose
KF Connection Braided Stainless Steel Bellow Hose This KF or (NW) bellow hose is made out of 304-grade stainless steel with braided exterior which allows a high vacuum to be obtained with a large flow diameter for vapors. These bellow hoses are flexible and allow the user to connect a KF flanged vacuum pump to a KF flanged vacuum oven or any other application using adapters. Sizes Available: KF-16 KF-40 KF-50 Lengths Available: 20" 40"
$60.00 - $165.00
KF Flange x FNPT Adapter
KF Flange x FNPT Adapter KF- or NW Vacuum fittings are designed for Ultra-High-Vacuum applications and are made out of 304 stainless steel. These fittings require a special gasket with metal centering ring to not allow over compression of the gasket. These fittings have female NPT threads that come in a variety of sizes, Female NPT threading which require thread sealant if they are installed to another NPT adapted fitting.
$22.00 - $47.00
KF Flange x Tri-Clamp End Cap Adapter
KF Flange x Tri-Clamp End Cap Adapter These 304 stainless steel adapters allow you to adapt from a KF (NW) type flange to a Tri-Clamp sanitary flange. This part can be used for vacuum lines or even adapting to a distillation setup.
$42.00
KF Hand Needle Valve - Nitrogen Tested
KF Hand Needle Valve This 90 degree valve has a KF (NW) High Vacuum Flange to adapt to any other KF type pump or manifold if needed. Sizes available include KF16, KF25, KF40, and KF50. It is made out of 304 stainless steel with Viton seals. This valve is not meant for precise flow control.
$225.00
KF High Vacuum Stainless Steel Flange x Female Joint Adapter
This unique adapter allows the user to adapt a KF25 or KF40 High Vacuum Flange fitting to a male ground joint glass fitting and it is made out of 304 stainless steel.
$38.00
KF O-ring
KF O-ring O-ring features a depth stop for clamping with Viton O-ring also fits the following high vacuum connections. NW16 NW25 NW40 NW50
$7.50 - $16.00
KF Sight Glass
These 4 piece sight glasses can hold high vacuum levels on a system with KF connections. The housing is made of 304 stainless steel with a viton x-profile seal. The glass is tempered, impact resistant glass that increases the longevity of the sight glass. The connection sizes available are: KF25 (NW25) KF40 (NW40) KF50 (NW50) *Light assembly may be required with a 5/64" Allen wrench. Before assembly, a light application of vacuum grease on the gasket is recommended.
$74.00 - $112.00
KF Solid End Caps
KF Solid End Caps This is a solid KF Endcap to cap of any size port when needed Size Available: NW16 NW25 NW40 NW50
$11.00 - $14.00
KF Stainless Steel Bellow Hose
KF Stainless Steel Bellow Hose This KF or NW flange bellow hose is made out of 304-grade stainless steel which allows a high vacuum to be obtained with a large flow diameter for vapors. These bellow hoses are flexible and allow the user to connect a KF flanged vacuum pump to a KF flanged vacuum oven or any other application using adapters like our KF x NPT or KF x Tri-Clamp Fittings.
$70.00 - $120.00
KF Vacuum Flange Reducer Adapter
This 304 Stainless Steel KF Vacuum Flange Reducer / Adapter is designed to convert K16 to KF25 or KF25 to K40 and vise versa.
$38.00
KF-25 5 Way Manifold
This is a KF-25 5 Way manifold for the splitting of vacuum applications especially vacuum ovens connected to a single Vacuum Pump in an array. The material is 304 Stainless Steel with a 10^-7 torr @ 72F Vacuum Rating. (Note: Does not include KF-25 Clamp or O-ring these items are sold separately.)
$59.00
KF-25 90 Degree Stainless Steel Elbow
KF-25 90 Degree Stainless Steel Elbow This 90-degree elbow has KF-25 connections on the end and is made out of high polish 304-grade stainless steel.
$28.00
KF-25 Bellow Fitting Hose - KIT
KF-25 Bellow Fitting Hose Kit This KF25 or (NW25) bellow hose is made out of 304-grade stainless steel which allows a high vacuum to be obtained with a large flow diameter for vapors. These bellow hoses are flexible and allow the user to connect a KF25 flanged vacuum pump to a KF25 flanged vacuum oven or any other application using adapters like our KF25 x NPT or KF25 x Tri-Clamp/ Tri Clover Fittings. This kit also has 2 KF25 clamps and gaskets. What's Included? (1) KF25 Flexible 304 Stainless Steel Bellow Hose (2) KF25 Centering Gaskets with Viton O-ring (2) KF25 Aluminum Clamps Bellow Hose Sizes Available: 1 Meter(s) (3.28 Feet) 2 Meter(s) (6.56 Feet)
$162.00 - $197.00
KF-25 Cross - 4 Way Splitting of Vacuum Applications
This is a KF-25 Cross for 4 Way splitting of Vacuum Applications especially vacuum ovens connected to a single Vacuum Pump in an array. The material is 304 Stainless Steel with a 10^-7 torr @ 72F Vacuum Rating. Does not include KF-25 Clamp or O-ring these items are sold separately.
$56.00
KF-25 Flange Kit
Complete KF-25 Flange Kit The Complete Kit for KF-25 Vacuum Fittings. Connect your flange to a pipe with this complete kit from BVV™. It includes Clamp, O-ring, and Flange
$35.00
KF-25 Ground Joint PTFE Adapter
KF-25 Ground Joint PTFE Adapter This adapter will fit any standard 24/40 or 34/45 ground glass joints and adapt to a KF25 flange. This adapter is best used to hook up a glass system to a steel vacuum hose such a KF25 bellows. The Joint has an o-ring for better sealing, but vacuum grease is still recommended for the best connection.
$39.00
KF-25 Stainless Steel 90 Degree Manifold
KF-25 Stainless Steel 90 Degree Manifold This 90 degree stainless steel KF-25 manifold has 2 1/4" FNPT ports and measures 10" x 7".
$65.00$40.00
KF-25 Stainless Steel 90 Degree Manifold - Long
KF-25 Stainless Steel 90 Degree Manifold - Long This 90 degree stainless steel KF-25 manifold has 2 1/4" FNPT ports and measures 10" x 36".
$80.00$45.00
KF-25 Stainless Steel Ball Valve (Nitrogen Tested)
KF-25 (NW25) Stainless Steel Ball Valve This ball valve has a KF25 (NW25) High Vacuum Flange to adapt to any other KF25 pump or manifold if needed and is made out of 304 stainless steel with a PTFE seat and seals.
$110.00
You have seen 1056 out of 1769 products