True Dewax Extractors

1LB TDX Closed Loop Extractor The True Dewax eXtractor (TDX) series of Closed Loop Extractors was designed to optimize the combined efficiency of a room-temperature quick wash extraction with the reduced wax content of a traditional dewax precipitation to produce a high-yielding extraction with exceptionally low fat, wax, and lipid content. This efficient combination has resulted in our most compact 1-pound extractor to date!  The 1LB TDX Closed Loop Extractor accomplishes its small but mighty form factor through its combination material/dewaxing column which utilizes a 6"x6" 1-pound material column optimized for a quick wash room-temperature extraction combined with a 6"x12" sleeved dewaxing column designed for efficient dry ice usage during the precipitation of fats & waxes.  The material/dewaxing column of the TDX line of Closed Loop Extractors comes standard with 2X 1.5" Borosilicate Sight glasses, 3X Full Bore Ball Valves, 1X 125PSI ASME Pressure relief valve, and 1X 1/4" JIC Butterfly Valve standard, along with a solvent dispersal plate above the quick wash material column to ensure an even distribution of solvent, paired with a 6" Short Sight Glass below the material column for visual monitoring of the extraction process. Beyond its optimized extraction features the TDX series of Closed Loop Extractors comes equipped with a 5-micron Dutch Weave Sintered Disk below the material column and a 1-micron Dutch Weave Sintered Disk below the Dewaxing column providing a staged filtration optimized for lipid exclusion and capable of utilizing adsorbents packed below the biomass material for increased purity. After the initial extraction and dewaxing procedure, the solution is then drained into the stand-alone 6"x12" collection base sized for a 5:1 butane to biomass ratio, complete with 2X 1.5" Borosilicate Sight glasses, 2X Full Bore Ball Valves, 1X 125PSI ASME Pressure relief valve, 1X 1/4" JIC Butterfly Valve, and a splatter platter base standard for easy extract harvesting. The 1LB TDX Closed Loop Extractor is available in 3 distinct models to suit your preference. The Explorer (V1) version of the 1LB TDX is your standard base model perfect for entry-level enthusiasts utilizing hot water bath solvent recovery methods complete with a standard non-jacketed splatter platter in conjunction with a 6L (6LB Butane capacity) DOT-Approved carbon steel recovery tank set up to recover solvent through 1/4" JIC lines. The Professional (V2) model Is the next step up with an upgraded stainless steel recovery tank complete with 1/2" JIC Recovery lines to improve passive recovery rates while utilizing a hot water bath solvent recovery method. The Elite (V3) model is the top-of-the-line model of the TDX series which includes the same upgraded Stainless Steel Recovery tank and 1/2" JIC recovery lines found within the Professional model but also includes a Jacketed Splatter Platter for use with a heated circulator for optimized solvent recovery. *Heated Circulator not included*Explorer: 6" Splatter Platter, 1/4" JIC recovery lines, Carbon steel Recovery tankProfessional: 6" Splatter Platter, 1/2" JIC Recovery Lines, Stainless Steel Recovery TankElite: 6" Jacketed Splatter Platter, 1/2" JIC Recovery Lines, Stainless Steel Recovery Tank Specifications 6"x6" 1LB Material Column 6"x12" Sleeved Dewaxing Column 1-5um Sintered disk filtration 6"x12" Collection Column  4X 1.5" Certified Borosilicate Sight Glasses 2X 125 PSI ASME Safety Valves 2-3X -30hg-2650PSI Compound Pressure Gauges 1/4"-1/2" Full Bore Recovery Lines 1/4" JIC Process Flow lines  Performance 6"x12" Sleeved Dewaxing Column for True Dewaxing Capability 6"x6" 1LB Material column optimized for quick wash extraction methods. Material column solvent dispersal plate for even biomass saturation 1-5um Dutch weave sintered disks for fine wax & lipid removal and adsorbent filtration compatibility  A Splatter Platter base for easy extract harvesting 1/2" JIC Recovery options for unrestricted solvent recovery available  on Professional & Elite modelsA True Dewax procedure ranging from 1-3 hours is capable of producing a low lipid content extract resulting in exceptional clarity and viscosity. ***Note: This system is most effectively utilized with a nitrogen assist to provide solvent movement throughout the system when the pressure of the solvent is reduced during the dewaxing procedure *** ***Note: Solvent not included with systems unless ordered separately. Any order with butane WILL NOT SHIP EXPEDITED.*** ***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors.

Read more less

2LB TDX Closed Loop Extractor The True Dewax eXtractor (TDX) series of Closed Loop Extractors was designed to optimize the combined efficiency of a room-temperature quick wash extraction with the reduced wax content of a traditional dewax precipitation to produce a high-yielding extraction with exceptionally low fat, wax, and lipid content. This efficient combination has resulted in our most compact 2-pound extractor to date!  The 2LB TDX Closed Loop Extractor accomplishes its small but mighty form factor through its combination material/dewaxing column which utilizes a 6"x12" 2-pound material column optimized for a quick wash room-temperature extraction combined with a 6"x24"  sleeved dewaxing column designed for efficient dry ice usage during the precipitation of fats & waxes. The material/dewaxing column of the TDX series of Closed Loop Extractors comes standard with 2X 1.5" Borosilicate Sight glasses, 3X Full Bore Ball Valves, 1X 125PSI ASME Pressure relief valve, and 1X 1/4" JIC Butterfly Valve standard, along with a solvent dispersal plate above the quick wash material column to ensure an even distribution of solvent, paired with a 6" Short Sight Glass below the material column for visual monitoring of the extraction process.  Beyond its optimized extraction features the TDX series of Closed Loop Extractors comes equipped with a 5-micron Dutch Weave Sintered Disk below the material column and a 1-micron Dutch Weave Sintered Disk below the Dewaxing column providing a staged filtration optimized for lipid exclusion and capable of utilizing adsorbents packed below the biomass material for increased purity. After the initial extraction and dewaxing procedure, the solution is then drained into the stand-alone 6"x24" collection base sized for a 5:1 butane to biomass ratio, complete with 2X 1.5" Borosilicate Sight glasses, 2X Full Bore Ball Valves, 1X 125PSI ASME Pressure relief valve, 1X 1/4" JIC Butterfly Valve, and a splatter platter base standard for easy extract harvesting. The 2LB TDX Closed Loop Extractor is available in 3 distinct models to suit your preference. The Explorer (V1) version of the 2LB TDX is your standard base model perfect for entry-level enthusiasts utilizing hot water bath solvent recovery methods complete with a standard non-jacketed splatter platter in conjunction with a #30 (14LB Butane capacity)DOT-Approved carbon steel recovery tank set up to recover solvent through 1/4" JIC lines.  The Professional (V2) model Is the next step up with an upgraded stainless steel recovery tank complete with 1/2" JIC Recovery lines to improve passive recovery rates while utilizing a hot water bath solvent recovery method. The Elite (V3) model is the top-of-the-line model of the TDX series which includes the same upgraded Stainless Steel Recovery tank and 1/2" JIC recovery lines found within the Professional model but also includes a Jacketed Splatter Platter for use with a heated circulator for optimized solvent recovery. *Heated Circulator not included*Explorer: 6" Splatter Platter, 1/4" JIC recovery lines, Carbon Steel Recovery TankProfessional: 6" Splatter Platter, 1/2" JIC Recovery Lines, Stainless Steel Recovery TankElite: 6" Jacketed Splatter Platter, 1/2" JIC Recovery Lines, Stainless Steel Recovery Tank   Specifications 6"x12" 2LB Material Column 6"x24" Sleeved Dewaxing Column 1-5um Sintered disk filtration 6"x24" Collection Column  4X 1.5" Certified Borosilicate Sight Glasses 2X 125 PSI ASME Safety Valves 2-3X -30hg-2650PSI Compound Pressure Gauges 1/4"-1/2" Full Bore Recovery Lines 1/4" JIC Process Flow lines  Performance 6"x24" Sleeved Dewaxing Column for True Dewaxing Capability 6"x12" 2LB Material column optimized for quick wash extraction methods. Material column solvent dispersal plate for even biomass saturation 1-5um Dutch weave sintered disks for fine wax & lipid removal and adsorbent filtration compatibility A Splatter Platter base for easy extract harvesting 1/2" JIC Recovery options for unrestricted solvent recovery available on Professional & Elite modelsA True Dewax procedure ranging from 1-3 hours is capable of producing a low lipid content extract resulting in exceptional clarity and viscosity. ***Note: This system is most effectively utilized with a nitrogen assist to provide solvent movement throughout the system when the pressure of the solvent is reduced during the dewaxing procedure *** ***Note: Solvent not included with systems unless ordered separately. Any order with butane WILL NOT SHIP EXPEDITED.*** ***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors.

Read more less

***Note: Butane(Solvent) not included with systems unless ordered with dropdown menu or separately. Any order with butane WILL NOT SHIP EXPEDITED. DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well ventilated areas. Check with your local fire marshal for guidance when operating indoors   Mini Icarus: Bi-Directional Flow True Dewax Closed Loop Reclamation Extraction System (System comes with 1 yr. limited warranty) The Icarus unit shares the same function of the standard Bi-directional extractors, but features rack mounting for ease of use. It is also the 5lb True Dewax unit. By utilizing an input manifold for the solvent, the user is able to switch from bottom flood to a top input on the material column. This method ensures that all material has been saturated and rinsed of oils on the first run. The oil bearing solvent then dumps into a sleeved spool, where it is chilled with dry ice. Once the solvent has chilled, waxes and lipids will coagulate and fall out of the solution. The solution is then filtered and dumped into a collection base. The rack unit comes standard with a port for nitrogen assistance. Key Features: 304 Stainless Steel construction BUNA-N gaskets 3”x 24” rack mounted material column with separated 8”x 10” collection base and 4"x24" Dewax vessel Milwaukee 316SS ball valves with 37° JIC flares Solvent input manifold to switch from bottom to top flood Manifold for vacuum and nitrogen assist Polycarbonate sight glass on collection base  High pressure clamps 80-20 racking #15 LP Recovery tank       Extractor Configurations: Explorer: Our standard true dewax extractor model.  Comes with a welded bottom base and standard LP tank.   Professional: This model comes with a splatter platter collection base.  This base has a removable bottom, making removal of extract easier.   Elite:  The Elite series comes equipped with all American made instrumentation valves by SSP.  It has a jacketed collection base with removable platter.  The jacketed collection gives precision during recovery, allowing a heated fluid to be circulated around the base.  This method keeps temperature both accurate and consistent. The Elite model comes with a stainless steel LP. This LP, being both corrosion resistant and cleanable, keeps solvent from being contaminated. *NOTE* This model requires a heater circulator or chiller     Explorer Professional Elite BVV 316SS Full Bore Valves Welded Bottom Base BVV 316SS Full Bore Valves Splatter Platter Base SSP Valves Jacketed Base/Platter SSLP   Specifications: Dimensions (Inches): Weight: Operating Temperature Range: -40C (-40F) to 72C (160F) Ultimate Vacuum: as low as 10 Microns Base unit Maximum Capacity: 1301 cubic inches, (21.323 Liters) Construction: All components made of 304& 316 Stainless Steel. Intake Fittings: JIC 37 Degree Vacuum Fittings Max Vacuum -29.9inHg High Polish Interior base     *Note:  Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity.  Low density, uncut, and/or lightly packed material can reduce capacity by 50%.  For best results, we recommend to tightly pack coarse ground material.

Read more less

***Note: Butane(Solvent) not included with systems unless ordered with dropdown menu or separately. Any order with butane WILL NOT SHIP EXPEDITED. ***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well ventilated areas. Check with your local fire marshal for guidance when operating indoors       Little Icarus: Bi-Directional Flow True Dewax Closed Loop Reclamation Extraction System (System comes with 1 yr. limited warranty) The Icarus unit shares the same function of the standard Bi-directional extractors, but features rack mounting for ease of use. It is also the 5lb True Dewax unit. By utilizing an input manifold for the solvent, the user is able to switch from bottom flood to a top input on the material column. This method ensures that all material has been saturated and rinsed of oils on the first run. The oil bearing solvent then dumps into a sleeved spool, where it is chilled with dry ice. Once the solvent has chilled, waxes and lipids will coagulate and fall out of the solution. The solution is then filtered and dumped into a collection base. The rack unit comes standard with a port for nitrogen assistance.   Key Features: 304 Stainless Steel construction BUNA-N gaskets 4”x 24” rack mounted material column with separated 10”x 10” collection base and 6"x24" Dewax vessel BVV 316SS ball valves with 37° JIC flares Solvent input manifold to switch from bottom to top flood Manifold for vacuum and nitrogen assist Polycarbonate sight glass on dewax and collection base High pressure clamps 80-20 racking #30 LP Recovery tank    Specifications: Dimensions (Inches): Weight: Operating Temperature Range: -40C (-40F) to 72C (160F) Ultimate Vacuum: as low as 10 Microns Base unit Maximum Capacity: 1301 cubic inches, (21.323 Liters) Construction: All components made of 304& 316 Stainless Steel. Intake Fittings: JIC 37 Degree Vacuum Fittings Max Vacuum -29.9inHg High Polish Interior base   Explorer: Our standard true dewax extractor model.  Comes with a welded bottom base and standard LP tank. Professional: This model comes with a splatter platter collection base.  This base has a removable bottom, making removal of extract easier. Elite:  The Elite series comes equipped with all American made instrumentation valves by SSP.  It has a jacketed collection base with removable platter.  The jacketed collection gives precision during recovery, allowing a heated fluid to be circulated around the base.  This method keeps temperature both accurate and consistent. The Elite model comes with a stainless steel LP. This LP, being both corrosion resistant and cleanable, keeps solvent from being contaminated.  *NOTE* This model requires a heater circulator or chiller     Explorer Professional Elite BVV 316SS Full Bore Valves Welded Bottom Base BVV 316SS Full Bore Valves Splatter Platter Base SSP Valves Jacketed Base/Platter SSLP     *Note:  Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity.  Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.

Read more less

***Note: Solvent not included with systems unless ordered separately. Any order with butane WILL NOT SHIP EXPEDITED.***   DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors   The Icarus 5LB True Dewax Bidirectional Closed Loop Extractor (System comes with 1 yr. limited warranty)   The Icarus unit shares the same function of the standard Bi-directional extractors, but features rack mounting for ease of use. It is also the 5lb True Dewax unit. By utilizing an input manifold for the solvent, the user is able to switch from bottom flood to a top input on the material column. This method ensures that all material has been saturated and rinsed of oils on the first run. The oil bearing solvent then dumps into a sleeved spool, where it is chilled with dry ice. Once the solvent has chilled, waxes and lipids will coagulate and fall out of the solution. The solution is then filtered and dumped into a collection base. The rack unit comes standard with a port for nitrogen assistance. The filtration on the true dewax column has been separated, making it easier to deal with clogs in the event that they occur.     Extractor Configurations: Explorer: Our standard true dewax extractor model.  Comes with a welded bottom base and standard LP tank.   Professional: This model comes with a splatter platter collection base.  This base has a removable bottom, making removal of extract easier. It also features a stainless steel LP tank and larger bore on valves and hoses. This makes the helps increase flow and decrease recovery times.  The stainless LP, being both corrosion resistant and cleanable, keeps solvent from being contaminated.    Elite:  The Elite series comes equipped with all the same features as the Professional model, as well as all American made instrumentation valves by SSP. The Elite has a fully jacketed collection base.  The jacketed collection gives precision during recovery, allowing a heated fluid to be circulated around the base.  This method keeps temperature both accurate and consistent.  This model comes standard with an Active recovery kit with ½” lines. *NOTE* This model requires a heater circulator or chiller       Explorer Professional Elite BVV 316SS Full Bore Valves Welded Bottom Base BVV 316SS Full Bore Valves Splatter Platter Base SSLP 3/8 Lines SSP Valves Jacketed Base/Platter SSLP 3/8” Lines MVP Active Kit ½’ Recovery   Key Features: 304 Stainless Steel construction BUNA-N gaskets 4”x 48” rack mounted material column with separated 12”x 12” collection base and 6"x36" Dewax vessel Solvent input manifold to switch from bottom to top flood Manifold for vacuum and nitrogen assist Polycarbonate sight glass on dewax and collection base High pressure clamps #50 LP Recovery tank   Specifications: Operating Temperature Range: -40C (-40F) to 72C (160F) Ultimate Vacuum: as low as 10 Microns Base unit Maximum Capacity: 1301 cubic inches, (21.323 Liters) Construction: All components made of 304& 316 Stainless Steel. Intake Fittings: JIC 37 Degree Vacuum Fittings Max Vacuum -29.9inHg High Polish Interior base   *Note:  Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity.  Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.

Read more less

***Note: Butane(Solvent) not included with systems unless ordered with drop-down menu or separately. Any order with butane WILL NOT SHIP EXPEDITED.   ***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors.   ***NOTE: This unit requires a chiller or circulation system.    The Icarus 8.5LB True Dewax Bidirectional Closed Loop Extractor Butane Extraction System (System comes with 1 yr. limited warranty) The Icarus unit shares the same functionality as the standard Bi-directional with the convenience of rack-mounted columns. The Bi-directional solvent input provides a complete material saturation. The oil-bearing solvent advances into a sleeved spool chilled with dry ice for further filtration. Freezing the solution will coagulate the waxes and lipids, causing them to crash out, leaving you with purified oil in the collection base. Extractor Configurations: Explorer: The standard true dewax extractor model has a welded collection base and a carbon steel LP tank.   Professional: The Professional series features a stainless steel LP tank with larger bore valves and 3/8-inch hoses, increasing recovery rates. The collection base has a removable bottom for an easier extract pour.   Elite:  The Elite series comes equipped with the same features as the Professional model with American-made instrumentation valves by SSP. The collection base has an outer liquid jacket that permits precision heating during recovery. Paired with a heated circulator* eliminates the need for a hot water bath. Active recovery: BVV's 4-cylinder recovery pump kit with 1/2-inch JIC hoses. An active recovery kit reduces the amount of dry ice needed. *NOTE* This model requires a heater circulator or chiller *NOTE* Explorer Professional Elite BVV 316SS Full Bore Valves Welded Bottom Recovery Base BVV 316SS Full Bore Valves Splatter Platter Recovery Stainless Steel Butane Storage Tank 3/8" Recovery lines SSP Valves Water Jacketed Recovery Jacketed Stainless Steel Butane Storage Tank BVV 4 Cylinder Butane Pump 1/2" Max Bore Recovery lines   Key Features: 304 Stainless Steel construction 37° JIC Stainless Steel PTFE hosing BUNA-N tri-clamp gaskets 6”x 36” rack-mounted material column 8"x36" Dewax column Multistage filter stack system Double jacketed collection base with locking wheels Collection vessel pour off valve BVV 316SS low temp ball valves (Elite: SSP Valves) Manifold for vacuum and nitrogen assist Polycarbonate sight glass on collection base High-pressure clamps 80-20 racking unit #100 LP Recovery tank (Elite: SS #100)  Specifications: Operating Temperature Range: -40C (-40F) to 72C (160F) Ultimate Vacuum: as low as 10 Microns Base unit Maximum Capacity: 1301 cubic inches, (21.323 Liters) Construction: All components made of 304& 316 Stainless Steel. Intake Fittings: JIC 37 Degree Vacuum Fittings Max Vacuum -29.9inHg High Polish Interior base   *Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material. Material Capacity Cylinder Volume Triclamp Spool (in) 1.5" 2" 3" 4" 6" 8" 10" 12" Length (in) 1" 2" 3" 4" 6" 8" 10" 12" 18" 24" 36" 48" Volume (in3) Select Material Butane ISO-Butane Propane How Much Will Fit in Cylinder FormulaVolume x Weight of Water x Specific Gravity ConstantsWeight of Water = 0.0360 (lbs / in3)Specific Gravity of = Lbs. of : Recommended: Account for an 80% fill to avoid a hydraulic lock  How Much Material Will Fit in the Cylinder Packing Density (g) 2.5 3 3.5 4.3 Grams of Material Lbs. of Material

Read more less