Valves

BVV™ 1/4" MNPT x 1/4" FNPT Stainless Steel Miniature Butterfly Handle Ball Valve   This 316 Stainless Steel Miniature Ball Valve features a stainless steel ball and Modified PTFE (Dyneon™ TFM1600) seats and packing on the inside. It has an overall length of 2-3/4" and has a 1/4 turn butterfly style valve.   Technical Data Sheet Pressure Tested in compliance with API 598 Ninth Edition 2009: Sec.5 and Sec.6   Specification Standard: ASTM A351 Stem: 316 Stainless Steel Seat: PTFE  Temperature Rating: -20C - 230C Pressure Rating: 1000 PSI (W.O.G. Water, Oil, Gas) Body: Cast 316 / CF8M Stainless Steel Cap: Cast 316 / CF8M Stainless Steel Ball Cast 316 / CF8M Stainless Steel Heat Treatment: Solutiom Annealed 1050-1100C Stem Packing: PTFE  Thrust Washer: PTFE 

Read more less

BVV™ 316SS FNPT Full Bore Ball Valve (Compare to Milwaukee 10 Series Ball Valves) This BVV™ 316 stainless steel full bore ball valve is a fire safe ball valve and is 1 piece ball valve construction. It also features a straight body style with Female NPT x Female NPT threaded connections with one side being pinned into place for zero movement during installation. The fire safe ball valve features a maximum pressure rating of 2000 PSI CWP and has a blowout proof stem made of 316SS and the temperature range of this ball valve is -40F° to 450F°. Standard: ASTM A351 Pressure Tested in compliance with API 598 Ninth Edition 2009: Sec.5 and Sec.6 Technical Data Sheet Valve Specifications Sizes Available: 1/4" FNPT 3/8" FNPT 1/2" FNPT Pressure Rating 2000 WOG Temperature Range -40 to 450F° Sizes Available: 1" (Fits 1.5" Tri-Clamp) Torque Specifications Do not Exceed 14.46ft-lbs when tightening.(Note: Overtightening the valve can cause damage to the pin. Doing this will void the valve warranty.) Valve Materials: Body 316SS / CF8M Ball 316 Stainless Steel Stem 316 Stainless Steel Stem Nut 304 Stainless Steel Insert 316 Stainless Steel Seat PTFE / Dyneon TFM1600 Thrust Washer PTFE / Dyneon TFM1600 Stem Packing PTFE / Dyneon TFM1600 Handle 304 Stainless Steel Handle Cov VINYL GRIP Handle Washer (1/2") 304 Stainless Steel Handle Nut 304 Stainless Steel Belleville Washer 304 Stainless Steel PIN 304 Stainless Steel

Read more less

316L SS Tri-Clamp/Tri-Clover Ball Valve - Nitrogen Tested (Valve holds a 30 day limited warranty) The 316L Stainless Steel Tri-Clamp Sanitary connection ball valve allows the user to restrict flow on their extraction system and close off a connection to a spool to allow the material to soak for longer durations extracting more of the essential oils. This Ball Valve is 1/4 turn locking handle with the 3-piece PTFE encapsulated core that is rebuildable if needed. This ball valve is nitrogen tested for leaks at BVV™ to ensure the ball valve is safe to operate. Specifications Material: 316L Stainless Steel Handle Type: 1/4 Turn Locking Connection Type(s): Tri-Clamp Sizes Available: 1" (Fits 1.5" Tri-Clamp) 1.5" 2" Temperature Range: -20℃ To +150℃ Working Pressure: 1000 WOG    Note: the valve is warrantied for 30 days from defects in workmanship

Read more less

Sanitary 3-Way Ball Valve These 3 way ball valves are typically used to drain a system that needs to be routed to multiple different places. The internal ball is an L shape meaning that the middle port should be used as the in and it can be routed to the left or right port. The valve can also be closed off so that the liquid will not move any direction. It can be easily attached to any system using Tri-Clamp flanges. Housing Material: 304 SS Seat Material: PTFE Temperature Range: 0-100°C

Read more less

KF-25 (NW25) Stainless Steel Ball Valve This ball valve has a KF25 (NW25) High Vacuum Flange to adapt to any other KF25 pump or manifold if needed and is made out of 304 stainless steel with a PTFE seat and seals.

Read more less

Butterfly Valve - 316 Stainless Steel - VITON Seals Butterfly Valve - 316 Stainless Steel  VITON Seals is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates Properties: Tri-Clamp / Tri Clover Sanitary butterfly valve 4 positions pull handle Stainless steel 316 Viton seal Meets 3 A Standard Operating Temperature: 15º F to 200º F   Gasket Properties VITON Heat resistant Excellent (400°F) Cold resistant Good-Excellent (-30°F) Steam Excellent Abrasion-resistant Good Alkali Poor-Good Acid resistance Good Vegetable oil Excellent Petroleum oil Excellent Oxonia Excellent

Read more less

Butterfly Valve - 316 Stainless Steel - Silicone Seals Butterfly Valve - 316 Stainless Steel  Silicone Seals is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates Properties: Tri-Clamp / Tri Clover Sanitary butterfly valve 4 positions pull handle Stainless steel 316 Silicone seal Meets 3 A Standard Operating Temperature: 15º F to 200º F  

Read more less

Bulk Head Short with Valve and Flare This bulkhead with attached valve is perfect for passing through thin walls in vacuum applications such as vacuum chambers, the maximum recommended wall thickness is 0.25". The gasket design is only meant to hold vacuum, it is not intended to hold pressure. The hole diameter for installing the bulkhead is 5/16". The flare connection is 1/4" JIC. 

Read more less

Bulk Head Long with Valve and Flare This bulkhead with attached valve is perfect for passing through thin walls in vacuum applications such as vacuum chambers, the maximum recommended wall thickness is 0.25". The gasket design is only meant to hold vacuum, it is not intended to hold pressure. The hole diameter for installing the bulkhead is 5/16". The flare connection is 1/4" JIC. 

Read more less

Habonim Cryogenic Ball Valve BVV™ Habonim Cryogenic Ball Valve - Data Sheet General Specifications Body Material CF8M Seat Material TFM Ball Material 316 SS Pressure Class 800 Temperature Range -60°C to 200°C

Read more less

ASME-Code Fast-Acting Pressure-Relief Valve for Air, Silicone Seal, 1/4 NPT   Valve Function Pressure Relief For Use With Air, Inert Gas Activation Pressure Driven Inlet Pipe Size 1/4 Connection Type Pipe Pipe Connection Type Threaded Connection NPT Male Location Bottom Relief Port Connection Type Vent Relief Port Location Side Set Pressure Configuration Nonadjustable Temperature Range -15° to 250° F Valve Shape 90° Elbow Valve Body Shape Straight Overall Height Varies Material Body Brass Seal Silicone Test Mechanism Ring Valve Type Pop Safety Specifications Met ASME BPVC.VIII RoHS RoHS 3 (2015/863/EU) compliant with exemption 6(c) - Lead in copper alloy REACH Not Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 848140.0000 ECCN EAR99       To protect against damage in air lines, air receivers, compressor tanks, and other air-powered equipment, these valves spring fully open at the set pressure and remain open until the system pressure is restored below the set pressure. All meet ASME Code Section VIII for use with air and inert gas pressure vessels. They have a vented relief port to exhaust discharge directly. Silicone seals provide better leak protection than brass seals.  

Read more less

Pressure-Relief Valves for Cryogenic Liquids       Valve Function Pressure Relief For Use With Liquid Carbon Dioxide, Liquid Nitrogen, Liquid Oxygen Activation Pressure Driven Inlet Pipe Size 1/4 Connection Type Pipe Pipe Connection Type Threaded Connection NPT Male Location Bottom Maximum Pressure 600 psi Relief Port Thread Size 3/4"-20 Connection Type Pipe Pipe Connection Type Threaded Connection UNEF Female Location Top Set Pressure Accuracy ±5% Set Pressure Configuration Nonadjustable Temperature Range -320° to 165° F Shape Straight Overall Height 2 5/8" Material Body Brass Valve Type Relief Flow Coefficient (Cv) Not Rated Specifications Met CGA G-4.1 RoHS RoHS 3 (2015/863/EU) compliant with exemption 6(c) - Lead in copper alloy REACH Not Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 848140.0000 ECCN EAR99     Cleaned and bagged to meet CGA G-4.1 for oxygen service and other high purity applications, these valves are built to withstand the extreme cold of liquid carbon dioxide, liquid nitrogen, and liquid oxygen. They begin opening at the set pressure and fully open at about 10% over the set pressure. Valves begin closing as pressure drops and fully close when the system pressure is restored below the set pressure. Set pressure is not adjustable. Valves are not intended for direct contact with cryogenic liquids. Risers (sold separately) are required to convert cryogenic liquids into gases before they contact the valve. 3/8 NPT valve requires a 1/2 NPT × 3/8 NPT bushing when using a riser.

Read more less

 ASME-Code Fast-Acting Pressure-Relief Valve for Air, Test Ring, Brass Seal, 1/4 NPT, 3-1/8" High     Valve Function Pressure Relief For Use With Air, Inert Gas Activation Pressure Driven Inlet Pipe Size 1/4 Connection Type Pipe Pipe Connection Type Threaded Connection NPT Male Location Bottom Maximum Pressure 300 psi Relief Port Connection Type Vent Relief Port Location Side Set Pressure Configuration Nonadjustable Temperature Range -40° to 400° F Valve Shape 90° Elbow Valve Body Shape Straight Overall Height 3 1/8" Material Body Brass Seal Brass Test Mechanism Ring Valve Type Pop Safety Specifications Met ASME BPVC.VIII RoHS RoHS 3 (2015/863/EU) compliant with exemption 6(c) - Lead in copper alloy REACH REACH (EC 1907/2006) (07/08/2021, 219 SVHC) Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 848140.0000 ECCN EAR99       To protect against damage in air lines, air receivers, compressor tanks, and other air-powered equipment, these valves spring fully open at the set pressure and remain open until the system pressure is restored below the set pressure. All meet ASME Code Section VIII for use with air and inert gas pressure vessels. They have a vented relief port to exhaust discharge directly.

Read more less

Check valves are an ideal solution along any Tri Clamp fitted system to mitigate backflow. Each Tri Clamp check valve is 3A certified to meet high sanitary standards. This check valve has 1-1/2" Tri-Clamp connections and a 1/2 PSI break pressure with an EPDM seal.

Read more less

DuraChoice 316 Stainless Steel Ball Valve - 1000WOG Stainless Steel (316) Ball The standard port VBS01 line is ready for action, with a 1000 psi rating, pure Teflon seats and seals, and a locking handle for added safety. Works with a wide variety of liquids and gasses. - 1pc Standard Port, 1,000 psi (WOG)SS316 Investment casting bodyWorking Pressure 1000 psi (WOG)Pure teflon seals and seatsSuitable for full range of liquids and gasTemperature range: -60 to 450 degree FahrenheitLow operation torque100% individually testedBlowout-proof stemFxF NPT Threaded ends to ANSI B1.20.1Heavy duty locking handles with blue vinyl insulatorDescription - MaterialBody - SS316 (CF8M)Ball - SS316 (CF8M)Cap - SS316 (CF8M)Ball Seat - RPTFEThrust Washer - PTFEStem Packing - PTFEStem - SS 304Packing Ring - SS 304Spring Washer - SS 304Stem Nut - SS 304Handle - SS 304Handle Lock - SS 304Handle Cover - PlasticPlease Note: Brass components in this product contain lead, known to the State of California to cause cancer and birth defects or other reproductive harm. California law requires that this warning be given to consumers.

Read more less

Milwaukee Valve 316SS FNPT Ball Valve (10SSOD-02-LL) This top of the line 316 Stainless Steel Milwaukee ball valve is a fire safe ball valve and is 1 piece ball valve construction. It also features a straight body style with Female NPT x Female NPT threaded connections with one side being pinned into place for zero movement during installation. The fire safe ball valve features a maximum pressure rating of 2000 PSI CWP and has a blowout proof stem made of 316SS and the temperature range of this ball valve is -20F° to 450F°. Milwaukee 10 Series Ball Valve Spec Sheet   Valve Specifications Sizes Available: 1/4" FNPT 3/8" FNPT 1/2" FNPT Pressure Rating 2000 WOG Temperature Range -20°F to 450°F Valve Materials: Body A351-CF8M Ball Retainer A351-CF8M Ball 316 Stainless Steel Stem 316 Stainless Steel Seat 304 Stainless Steel Thrust Washer 316 Stainless Steel Seat RTFE Thrust Washer RTFE Stem Packing GRAPHOIL Gland 316 Stainless Steel Handle 304 Stainless Steel Handle Nut 304 Stainless Steel Handle Nut 304 Stainless Steel Belleville Washer 304 Stainless Steel PIN 304 Stainless Steel

Read more less

DuraChoice Full Port Welded 316 Stainless Steel Ball Valve - 2000WOG Designed for petroleum and natural gas production, the VBS2KF line of high-pressure valves is pressure rated at 2,000 psi and formulated to resist the corrosion that can plague other ball valves in oilfield or refinery conditions. The valve is seal welded for additional strength.S.S. 316 (CF8M) investment casting, 2-piece full port body designWorking pressure of 2,000 PSI (WOG)Suitable for full range of liquids and gasesSeal weldedLow operation torque100% individually testedBlowout-proof stemNPT threaded ends to ANSI B1.20.1Meets NACE MR0175 standardISO 9001 StandardHeavy duty locking handle with insulator   Designation - MaterialBody - SS 316 (CF8M)Ball - SS 304Cap - SS 316 (CF8M)Ball Seat - RPTFEThrust Washer - RPTFEStem Packing - PTFEStem - SS 304Gland Nut - SS 304Handle Washer - SS 304Handle Nut - A2-70Handle - SS 201Handle Lock - SS 201Handle Cover - Plastic

Read more less

Swagelok 1/4" FNPT 316SS Ball Valve   This 316SS ball valve can be used in a wide range of applications and contains a leak-tight shutoff that significantly reduces potential leaks. Ball valves are designed to control fugitive emissions and leakage and have an overall low cost of ownership. Key Features: User-friendly operating temperature rating Leak resistant with increased thermal performance Can be configured or manufactured to a wide range of applications   Specifications Actuator Type Manual Ball/Stem Material Stainless Steel Body Material 316 Stainless Steel Cleaning Process Standard Cleaning and Packaging (SC-10) Connection 1 Size 1/4" Connection 1 Type Female NPT Connection 2 Size 1/4" Connection 2 Type Female NPT Flow Path Standard (2-way) Handle Type Nylon-Stainless Steel Insert Flow Pattern 2-way, shutoff, straight Handle Color Black Handle Style Lever Lubricant Dow M11 Max Temperature Pressure Rating 300°F @ 2500 PSIG /148°C @ 172 BAR Orifice 0.187 in /4.7 mm Packing Modified PTFE Ring/Disc Material Stainless Steel Room Temperature Pressure Rating 3000 PSIG @ 100°F /206 BAR @ 37°C

Read more less

Extractor Dispensing Wand with Toggle Valve This Dispersing Wand is used for dispensing out extracted material without having to lift a heavy collection base and is a lot more controllable when spreading it across a sheet. The valve is a 316L stainless steel compression fitting toggle valve with 3/8" JIC flare and 3/8" diameter x 7" long angled dispersing tube.

Read more less

2 Way Ball Valve - Female NPT   SSP Instrumentation Flolok® manually operated two-way ball valves provide quick ¼ turn directional flow control of fluids in instrumentation and process systems.  Features: Directional handle indicates flow direction Panel Mountable 90-degree actuation Straight through flow path Micro finished ball provides a positive seal Free-floating ball design provides compensation for seat wear for repetitive sealing Blow-out proof ball & stem Standard Product Testing - Every ball valve is assembled and tested @ 1000 psig (68.9 bar) with Nitrogen   Specifications Body Material 316 Stainless Steel Temp Rating -53C to 148C Pressure Rating @100F 3000 PSIG @37C 208 BAR @300F 2500 PSIG @148C 172 BAR Connection Type 1 Female NPT Connection Size 1 Specified by User Connection Type 2 Female NPT Connection Size 2 Specified by User Handle Type Nylon-Stainless Steel Insert Handle Color Black Packing Material PTFE   SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

Read more less

SSP Instrumentation Flolok® manually operated two-way ball valves provide quick ¼ turn directional flow control of fluids in instrumentation and process systems. Features: Directional handle indicates flow direction Panel Mountable 90 degree actuation Straight through flow path Micro finished ball provides positive seal Free floating ball design provides compensation for seat wear for repeitive sealing Blow-out proof ball & stem Standard Product Testing - Every ball valve is assembled and tested @ 1000 psig (68.9 bar) with Nitrogren   Specifications Body Material 316 Stainless Steel Pressure Rating @ 100F 3000 PSIG @37C 208 BAR @300F 2500 PSIG @148C 172 BAR Connection Type 1 Male NPT Connection Size 1 Specified by User Connection Type 2 Male NPT Connection Size 2 Specified by User Handle Type Nylon-Stainless Steel Insert Handle Color Black Packing Material PTFE     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!  

Read more less

SSP - 2 Way Ball Valve - Fractional Tube Fitting SSP Instrumentation Flolok® manually operated two-way ball valves provide quick ¼ turn directional flow control of fluids in instrumentation and process systems. Features: Directional handle indicates flow direction Panel Mountable 90-degree actuation Straight through flow path Micro-finished ball provides positive seal Free-floating ball design provides compensation for seat wear for repetitive sealing Blow-out proof ball & stem Standard Product Testing - Every ball valve is assembled and tested @ 1000 psi (68.9 bar) with Nitrogen   Specifications Body Material 316 Stainless Steel Pressure Rating @ 100F 3000 PSIG @37C 208 BAR @300F 2500 PSIG @148C 172 BAR Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Connection Type 2 Duolok Tube Fitting Connection Size 2 Specified by User Handle Type Nylon-Stainless Steel Insert Handle Color Black Packing Material PTFE   SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

Read more less

SSP - 3 Way Ball Valve - Female NPT SSP Instrumentation Flolok® manually operated three-way ball valves accept media through the bottom port and allow selection of flow through a selected port. Features: Directional handle indicates flow direction Panel Mountable 180-degree actuation Directional flow path Micro-finished ball provides positive seal Free-floating ball design provides compensation for seat wear for repetitive sealing Blow-out proof ball & stem Standard Product Testing - Every ball valve is assembled and tested @ 1000 psi (68.9 bar) with Nitrogen   Specifications Body Material 316 Stainless Steel Pressure Rating @ 100F 3000 PSIG @37C 208 BAR @300F 2500 PSIG @148C 172 BAR Connection Type 1 Female NPT Connection Size 1 Specified by User Connection Type 2 Female NPT Connection Size 2 Specified by User Connection Type 3 Female NPT Connection Size 3 Specified by User     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

Read more less

SSP - 3 Way Ball Valve - Fractional Tube Fitting SSP Instrumentation Flolok® manually operated three-way ball valves accept media through the bottom port and allow selection of flow through a selected port. Features: Directional handle indicates flow direction Panel Mountable 180-degree actuation Directional flow path Micro-finished ball provides positive seal Free-floating ball design provides compensation for seat wear for repetitive sealing Blow-out proof ball & stem Standard Product Testing - Every ball valve is assembled and tested @ 1000 psi (68.9 bar) with Nitrogen   Specifications Body Material 316 Stainless Steel Pressure Rating @ 100F 3000 PSIG @37C 208 BAR @300F 2500 PSIG @148C 172 BAR Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Connection Type 2 Duolok Tube Fitting Connection Size 2 Specified by User Connection Type 3 Duolok Tube Fitting Connection Size 3 Specified by User Handle Type Nylon-Stainless Steel Insert Handle Color Black Packing Material PTFE   SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

Read more less

Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting Overview Straight Pattern, High-Flow Make fine adjustments in low- or high- pressure, and low-, medium-, or high- flow applications with Swagelok metering valves that deliver accurate flow control when it matters in situations such as analytical or research applications.   Safe Product Selection The complete catalog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Warning: Do not mix/interchange Swagelok products or components not governed by industrial design standards, including Swagelok tube fitting end connections, with those of other manufacturers.  Specifications:  BODY MATERIAL -316 Stainless Steel CONNECTION 1 SIZE - 3/8 in. CONNECTION 1 TYPE - Swagelok® Tube Fitting CONNECTION 2 SIZE - 3/8 in. CONNECTION 2 TYPE - Swagelok® Tube Fitting CLEANING PROCESS - Standard Cleaning and Packaging (SC-10) MAXIMUM TEMPERATURE °F (°C) - 400 (204) MINIMUM TEMPERATURE °F (°C) - -10 (-23) CV MAXIMUM - 0.15 Handle Style - Knurled

Read more less

BVV Stainless Steel (316) Mini Ball Valve - FxM NPT Stainless Steel Mini Ball Valves (or miniature ball valves) are made for use in confined spaces. With a pressure rating of 1,000 PSI (water,  oil or gas) and made out of SS 316, this line of valves outshines the rest of the mini ball valves available on this site. SS 316 (CF8M) body and ball - for extra strength and corrosion resistance Working on pressure of 1,000 PSI (WOG)Double seal system allows for flow can go in either directionHeavy duty Zinc Alloy handles (painted blue)Fast 1/4 turn open or closed operation Each valve individually tested for maximum safety Designation - Material Body - SS 316 (CF8M)Ball - SS 316 (CF8M)Bonnet - SS 316 (CF8M)Ball Seat - RPTFEValve Stem - SS 304/SS 316 Screw - SS 304 Lever - Aluminum Alloy O-Ring - NBR/Viton. Temperature rating -20 to 356F

Read more less

BVV™ 1/4" Female Swivel x 1/4" Male Swivel Valve BVV™ brand Female Brass Swivel valve with a 1/4" Female SAE swivel end with O-ring and 1/4" Male SAE end connect to FJIC or HVAC hoses.

Read more less

Rieke 3/4" Flo-Rite Polyethylene Faucet  Rieke® 3/4" Flo-Rite plastic faucet made out of FDA-approved polyethylene (PE) plastic. The 57WFLO is designed to screw into 3/4" threaded openings and can be used to dispense most non-flammable liquids and chemicals. **This will attach to any 5 Gallon 'Jerrycan' / Jug that BVV™ sells. (Thread sealant such as PTFE tape may be required depending on liquid viscosity)

Read more less

Polyethylene Plastic Drum Faucet with Vent This self-venting spigot eliminates chugging and splashing. Made of LLDPE, HDPE & polypropylene EPDM gaskets 15/16" OD spout Meets FDA standards **This will attach to any 5 Gallon 'Jerrycan' / Jug that BVV™ sells.

Read more less

Features: Precise cracking pressure with high reliability Keep the sealing to 95-98% of Set Pressure at least Reliable Reseal performance Tamper proof design 316 Stainless Steel NBR Seal Material 1/4" MNPT Connection or 1/4" JIC Swivel Connection Pressure Range - 0.03 to 1.03 bar (0.5 to 15 PSI)  Temperature Range: -195 to 204C (-45 to 400F)   Design and Application: V61 Series Vent relief valves is designed to vent out the excess pressure from the line automatically to keep the required line pressure safely when the line pressure is exceeded over the limitation unusually. These valves can be used in the case that the working fluid is not harmful when vented out. The level of cracking pressure should be set by adjusting the force of the spring in the valve before this valve is installed in the system.  Installation and Operation: This valve should be positioned perpendicularly to the direction of fluid flow in the line and that position should be considered and the vented fluid should be not directed to the personnel operating and the parts that has any influences on that. The line system should be run to check the performance of the valve after the personnel operating move to the safety zone. Because this valve is opened automatically when the excess of the required Line pressure.

Read more less

Recommended for dispensing light oils, acids and cleaning solutions.  FDA approved high-density polyethylene (HDPE) plastic faucet. The faucet is designed to fit 2" NPT threads and can be used to dispense most non-flammable liquids. Use with plastic and steel drums. Tough polyethylene. FDA compliant. Material: High density polyethylene (HDPE ) is the most commonly used resin. This economical plastic has good impact resistant, is naturally translucent, flexible, and typically used for personal care products, such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs, and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Generally, it should not be used with products filled at over 145°F.

Read more less

Plastic Spigot for 1 Gallon Jugs This self-venting spigot eliminates chugging and splashing. Made HDPE & polypropylene Fits 1QT or 1 Gallon containers sold by BVV™

Read more less

ASME 250 PSI Brass Safety Valve - 1/2" MNPT Model “SB” ASME safety valve is a high capacity safety valve. Unique O-ring seal ensures valve is bubble-tight to within 10% of set pressure. Set pressure tolerance is +/-3%. SB50 Outline Drawing SB Flow Charts Specifications Construction: Brass Stainless Steel Springs FKM O-Ring Seal Set Pressure 250 PSI Max Temp. 250ºF

Read more less

KF Hand Needle Valve   This 90 degree valve has a KF (NW) High Vacuum Flange to adapt to any other KF type pump or manifold if needed. Sizes available include KF16, KF25, KF40, and KF50. It is made out of 304 stainless steel with Viton seals. This valve is not meant for precise flow control.

Read more less

1" 304SS Butterfly Valve with 90 Spout 1" Triclamp butterfly valve with 90-degree spout. can be used as either a shutoff service, or for coarse flow discharge in several applications Trigger handle butterfly valves provide speed control through resistance and they offer more control than a 3-position pull handle butterfly valve. Material: 304 Stainless Steel Tri Clamp Size: 1 inch

Read more less

KF-40 (NW40) Stainless Steel Ball Valve This ball valve has a KF40 (NW40) High Vacuum Flange to adapt to any other KF40 pump or manifold if needed and is made out of 304 stainless steel with a PTFE seat and seals.

Read more less