Cascade CVO-2 PRO Vacuum Package
The CVO-2 PRO Package is a 2 cubic foot, benchtop vacuum oven with a powerful, 5.4 CFM oil-free scroll pump. It is an ideal benchtop set up for vacuum drying or purging temp sensitive material but at faster rates, with deeper vacuum and optimized vapor flow rates. This complete system will liberate solvents, water or other unwanted compounds in a small batch, laboratory environments.
CVO-2 PRO Package Includes:
CVO-2 vacuum oven
5 aluminum shelves in 1″, 2″ and 3″ heights for varied configurations
Agilent IDP7, 5.4CFM dry scroll pump
MAXEVAP vacuum oven to pump connection kit. This special connection kit optimizes flow rates with a large 1″ dia exit path out of oven, large, vacuum rated 1″ diameter lines, a large 1″ diameter vacuum valve and into the 1″ diameter vacuum pump inlet. At no time is the out-gas load restricted or flow reduced. Also includes the KF-25 hardware.
The CVO-2 PRO Package allows for easy expansion
Easily connect another vacuum oven to the large pumping system to increase capacity and save on future costs.
Both oven and pump can run off a single dedicated 120V / 1ph / 20 AMP circuit. Both oven and pump can be built/ configured to run on 220V / 1ph
CVO-2 Vacuum Oven
NRTL Certified by TUV
5 shelves (11.5″W x 19″D) in a flexible configuration. Stack-able and removable
Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven
Bright LED lights in window for visibility of sensitive material
Digital vacuum gauge reads in inches of mercury
Simple, set-point control
Smooth, quarter-turn vacuum and vent valves
Rear KF-25 port allows for rapid MAXEVAP purging or running feedthroughs inside oven for monitoring
120V (220V available)
Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007 156CFR/201 11 SGCC -2577 ½ UA
Adjustable leveling feet ensure oven sits solid and level in the workspace
CVO-2 Connections
3/8″ Barb for Vacuum Pump
1/4″ Barb for Venting (N2 Connection OK)
KF-25 Port for feedthroughs or MAXEVAP Connection Kit
Agilent IDP7 Dry Scroll Pump Features
Oil-Free. Eliminates contamination risk. Will not smoke out exhaust, no filter required.
Quiet (for a vacuum pump)
5.4 CFM pumping speed
Ultimate vacuum: 2 x 10-2 Torr
120V or 220V / 1ph power – flexible configuration
Adjustable “gas ballast” allows for better solvent tolerance / ingestion
Maintenance requires the replacement of a single “tip seal”. Low cost of ownership.
Powerful enough to accommodate a second vacuum pump
Want Hotter Than 150°C (300°F)?
CVO-2-HT (High Temp) has a temperature range Up to 220°C (428°F)
The Cascade Difference
Vacuum ovens have been around for decades. Basic vacuum ovens are mass-produced and sold by many large scale laboratory equipment distributors. But there are key differences between Cascade and other inexpensive, often imported vacuum ovens:
Exceptional Temperature Control & Stability
The Cascade CVO-2 uses a unique control logic not found in most lab grade vacuum ovens. The temperature probe is INSIDE the oven, which minimizes temperature overshoot and delivers best-in-class temperature stability and uniformity particularly in the low temperature ranges. Accurate, stable temps throughout the CVO-2 eliminate hot and cold spots, making accurate use of every inch of shelf space.
Independent Over-temp Failsafe Protection
The Cascade Sciences CVO-2 is equipped with a heating cutoff system that will automatically stop power to the heaters when the oven shelf temps exceed 200°C or 392°F. This protection system will provide peace of mind for overnight processing or unattended vacuum bake outs.NRTL Certification #U8 170464972 077. No Extra cost.
The CVO-2 Vacuum Oven comes certified by the Nationally Recognized Test Lab, TUV. This certification is a requirement by many municipalities.CAN/CSA-C22.2 No. 61010-1:2012+UPD No. 1:2015-07 + UPD No. 2:2016-04CAN/CSA-C22.2 No. 61010-2-010:2015UL 61010-1:2012/R:2016-04UL 61010-2-010:2015EN 61010-1:2010EN 61010-2-010:2014
Rigorous Quality Assurance in an ISO Certified, USA Manufacturing FacilityCascade Sciences manufactures our ovens in Oregon, USA. We are proud of our ISO 9001 Certification/Accreditation. Each oven completes a series of quality assurance procedures before shipment:Chambers are vacuum tested after welding for vacuum integrityElectrical & mechanical safety is thoroughly tested in compliance with TUV requirementsFunctional testing verifies user settable items consistent with most lab protocols/usage models
Temperature verification includes calibration & temp chamber uniformity following ASTM standards
Units are cleaned and packed in ISTA tested, certified packaging materials
Digital Vacuum Gauge
The digital vacuum gauge installed on the CVO-2 is factory default set to read in inches of mercury (“Hg) with a scale of 0 – 29.9”Hg. Change the unit of vacuum measurement to read in a wide variety of units from mmHg, bar psi, kPa, cm2, mmH20. Zero out the vacuum gauge to calibrate for just above sea level adjustments.
Equipped for Inert Gas Backfill. Built-In Safety Relief
Introduce inert gasses such as nitrogen, argon, helium, etc. as part of your process via the 1/4″ rear vent barb. The maximum backfill pressure is 15psi at the inlet. In an overpressure situation, a simple, built-in safety relief allows gasses to escape via a spring loaded tempered window.Flexible Pumping / Feedthru Connection Ports
The CVO-2 ovens offer two different vacuum oven connection points. The standard connection is a 3/8″ dia barb located at the rear of the oven. It is connected to the vacuum valve level on the front control panel. For even faster evaporation, purging or drying consider upgrading to the MAXEVAP connection kit. The MAXEVAP connection kit secures to the oven’s rear 1″ dia KF-25 port located on the back center of the chamber. The MAXEVAP connection never reduces flow by continuing with 1” diameter vacuum rated clear lines, a 1” dia KF-25 side mounted vacuum valve and KF-25 fittings and hardware. This KF-25 port can also be used to run temperature feedthroughs, or monitoring sensors inside the vacuum chamber during processing.
Stackable Shelf Design For Maximum Temperature Conduction
Under vacuum, there is no air inside a vacuum oven. Temperatures are achieved by a process of conduction and radiation to move temperatures into the product inside the oven. Cascade’s stackable shelf design makes the most of this opportunity by making the chamber longer and narrower, rather than square and supplies stackable shelves in multiple height configurations to allow for the fastest, most uniform transfer of heat.
Ergonomically Designed, Easy Quarter-Turn Valves
For anyone that has struggled with consistently turning the small, round, low-quality vacuum/vent valves, relief is in sight. You will love our large, quarter-turn vacuum/vent valves. Your wrists will thank you!
ANSI Rated Tempered Glass + USA Made Steel
Cascade ovens are made in Oregon, USA with high quality materials. Our glass is NGI-USA Tempered and certified to ANSI Z97.1.2007 16CFR / 201 11. Our door handles are rugged brushed steel, not plastic. Our vacuum vessels are constructed with American made steel. We’ve tried lower cost, imported steel, but over time, vacuum chambers made of lesser quality/lower tolerance material cannot withstand the flex and pressure changes of vacuum pumping/venting/purging. This can deteriorate vacuum integrity and the oven will lose its ability to hold vacuum.
Door Gasket Options – Ideal For Your Process
Cascade’s vacuum ovens come standard with a High Temp Silicone Door Gasket. We also offer a Solvent resistent BUNA gasket as well. Ask us about the variety of door gaskets we can supply based on your application: Silicone, BUNA, Viton, Fluorosilicone. Gaskets will eventually wear out. It’s ideal to keep a few spares on hand.
Specifications
Capacity
Volume
1.67 Cubic Ft. | 47.2 Cubic Liters
Interior
12”W x 20”D x 12"H
711mm x 609mm x 609mm
Exterior
18.8” W x 24.5” D x 24.5”H
478mm x 622mm x 622mm
Temperature Ranges
Low-Temp Processing Range
26°F to 250°F (121°C)
Temperature Uniformity
+/- 1.5°F @ 105°F (40.5°C)
Temperature Stability
+/- 0.4°F @ 105°F(40.5°C)
Heat Up / Stabilization Time to 250°F
120 minutes (to minimize overshoot)
High-Temp CVO-10 (SVAC 9.3)
Up to 428°F / 220°C
Temperature Uniformity
+/- 6.5% of setpoint
*Note that ambient laboratory conditions can affect temp performance.
Vacuum Valve
Type
Side Mounted Round
Vacuum
Vacuum Valve
¼ Turn Lever
Vent Valve
¼ Turn Lever
Lighting
Interior
LED Strips (Rated to 150C)
On low temp CVO-10 only
Window Type
Glass
Tempered NGI-US to ANSI Z97.1.2007
Vacuum Gauge
Indication
Digital 0 to 29.9″Hg
Temperature Controller
Screen Type
Digital Set Point
Accuracy
Accurate Within 1°F
Failsafe
Independent Overtemp Failsafe
Ports-Rear
Vacuum
3/8″ Barb
Vent
1/4″ Barb
Auxiliary
KF-25 Port
Inert Gas Introduction
Use 1/4″ Vent Barb
15 psi max inlet pressure
Power Options
Power
110V – 120V / 1ph / 8A 50/60Hz
Cord?
Cord Included
Outlet Type
NEMA 5-15R Power Outlet
Shelving
Removable?
Removable
Quantity Included
Comes with 5 Each. Fixed.
Detail
Slide on rails, extend, stay in place. Aluminum
Surface Area
11.5″W x 19″D
Weight Capacity
50 lbs (22.7kgs)
Weight
Unit Weight
179 lb (81.2 kg)
Shipping Weight
218 lbs (99 Kg)
Shipping Details
Dimensions
33″L x 33″W x 47″D
Class
Class 85
Certifications
NRTL TUV #U8 170464972 077CAN/CSA-C22.2 No. 61010-1:2012+ UPD No. 1:2015-07 + UPD No. 2:2016-04CAN/CSA-C22.2 No. 61010-2-010:2015UL 61010-1:2012/R:2016-04UL 61010-2-010:2015EN 61010-1:2010EN 61010-2-010:2014
Vacuum Pump
Agilent IDP3 Vacuum Pump
Oil-Free, Scroll Pump
2.1 CFM
120V | 1ph
Ultimate Pressure
29.9 ”Hg | 2.5 x10-1 torr
Gasket Options
Solvent Resistant BUNA Option
Rated to 105°C (221°F)
Viton Option
Rated to 205°C (401°F)
CVO-2-2 (220V) Power Specs
220 – 240V / 1ph / 4A 50/60 Hz (Cord Included)
NEMA 6-15R Power Outlet
Warranty
Length
1 Year
Exclusions
Gaskets Not Incuded
The CVO-2 comes in both low temp and high temp versions. The low temp version has excellent temperature uniformity for temperature sensitive material. The higher temp version, 220°C has a uniformity about 6.5% of setpoint. At time of order we will verify the high / low temp version you require.*Temperature performance specifications are preformed in empty ovens. Performance can vary in ovens containing product.
Manual
Pump Specs
View NRTL Certification
Vacuum Pressure Chart
Vacuum Gauge Manual
Calibration
Read
more
less
