4/20 SALE! GET UP TO 20% OFF STOREWIDE UNTIL 4/26!

Ancillary Equipment

5 products


  • Tri-Clamp Neoprene Insulation Sleeve by BVV New Products BVV

    Tri-Clamp Neoprene Insulation Sleeve by BVV

    BVV Neoprene Insulation Sleeve's Our Insulation sleeves are made from 3mm durable Neoprene Scuba Fabric and has a rated insulation value of R 1.5 These sleeves are 90% polyester and 10% spandex which makes all of these a snug fit around the spools.  The material weighs in at 350 grams per square meter and has a smooth finish and a double stitched side seam.   The sleeves can be easily cut with scissors and modified to add custom cutouts.  The sleeves are also reversible and the inside color is black.   Note: *Customers who order De-Wax or Fully Jacketed spool sleeves will not have pre-cut holes for the side ports.  But fear not this material cuts very easily with sharp cutting tools, and you can easily add the small holes for these ports.    BVV's Tested Temperatures:  -80°C to 105°C (-112°F to 220°F) we have not tested beyond these temperature, it doesn't mean it not capable its just untested by BVV.  

    $5.83 - $57.81

  • 304 Stainless Steel Wool - 2 Pack Shop All Categories BVV

    304 Stainless Steel Wool - 2 Pack

    304 Stainless Steel Wool   This 304 Grade Stainless Steel Wool is a great accessory for any extraction, condensing, or a filtration system. Stainless Steel Wool provides a vastly superior surface area compared to ball bearings and can be packed tighter to increase the surface area.   This 304 Stainless Steel Wool comes in a pack of two rolls that roughly measure 15" x 15". BVV™ recommends cleaning this filtration material with high purity alcohol before use to reduce contaminants. Specifications Material 304 Stainless Steel Wire Thickness 0.006" Dimensions 15" x 15"

    $17.00

  • 304 Stainless Steel Ball Bearings Packs 1/8-inch Diameter

    304 Stainless Steel Ball Bearings Packs

    304 Stainless Steel Ball Bearings - Packs 304 Stainless Steel Ball Bearings are a great addition to aiding in filtration because they increase the surface area inside a system and allow fats and lipids to cling to them. After a run is complete, they are easily cleanable. These ball bearings come pre-packaged in 140-gram packets and may have a quantity +/- the stated quantity per pack. Sizes Available: 1/8" Diameter - ~1150 Ball Bearings Per Pack 1/4" Diameter - ~150 Ball Bearings Per Pack 7/16" Diameter - ~25 Ball Bearings Per Pack

    $7.00 - $31.00

  • Economy Recirculating Heater Kit Shop All Categories BVV

    Economy Recirculating Heater Kit

    Economy Recirculating Heater Kit The Economy Recirculating Heater Kit is designed to provide efficient heating and circulation at an affordable price. The kit includes a submersible water pump for fluid circulation, an LX or MX immersion heater, and all tubing and hose clamps needed to pair with your system. The tubing is 1/2" ID x 5/8" OD and the pump fitting is 1/2". The pump will circulate up to 594 GPH. Economy Recirculating Heater Kit Includes: Polyscience LX or MX Immersion Circulator EcoPlus Eco 633 Fixed Flow Submersible/Inline Pump 594 GPH 5 Gallon Aluminum Pot 10 Feet of 1/2" Silicone Tubing 10 Pack of Adjustable Stainless Steel Tubing Clamps

    $1,450.00

  • Active Aqua - Submersible Water Pump Hydroponic Center Active Aqua 250 GPH

    Active Aqua - Submersible Water Pump

    NOTE: Models 40 GPH-160 GPH contain a steel shaft and are not suitable for saltwater applications. Larger pumps (250 GPH-1000 GPH) have a ceramic shaft, and these are suitable for saltwater operation.  Choose a pump that was built to go below the waterline! Active Aqua's entire collection of pumps complete any grow setup. You can't beat the submersible line, as it is built for hydroponic systems. All of Active Aqua's submersible pumps include multiple hose fittings so you get an exact fit every time. Each pump's powerful mag drive construction includes removable foam filters, impellers, rubber mounting feet to reduce vibration, and a 6-foot heavy duty power cord. Adjust the pump's flow to get things moving at your preferred rate. Specifications 250 gallons per hour, recommended for 25 gallon reservoirs, 16 Watts/120 VAC 400 gallons per hour, recommended for 40 gallon reservoirs, 24 Watts/120 VAC 550 gallons per hour, recommended for 55 gallon reservoirs, 33 Watts/120 VAC 800 gallons per hour, recommended for 80 gallon reservoirs, 58 Watts/120 VAC 1,100 gallons per hour, recommended for 100+ gallon reservoirs, 92 Watts/120 VAC Features Oil free and environmentally safe BPA free—safe for aquaponic use One year warranty 6' power cord UL-listed   NOTE: Models 40 GPH-160 GPH contain a steel shaft and are not suitable for saltwater applications. Larger pumps (250 GPH-1000 GPH) have a ceramic shaft, and these are suitable for saltwater operation. 

    $55.00

Login

Forgot your password?

Don't have an account yet?
Create account