Wood Stabilizing and Silicone Molding
Best Value Vacs 3 Gallon Aluminum Vacuum Chamber W/GLASS LID
Best Value Vacs 3 Gallon Aluminum Vacuum Chamber W/GLASS LID Comes with 2 yr Limited Warranty This is a complete BestValueVac® vacuum chamber setup designed built and 100% tested in Naperville, Illinois. With our unique patent pending gasket design (Patent #9475627) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs. *Please Refer to these charts for vacuum specifications at altitude and conversions: Vacuum at Altitude Chart Vacuum Conversion Chart Key Features: Aluminum Vessel Highly Durable and Reversible Silicone Gasket Glycerin filled vacuum gauge User friendly vacuum connections that fit most vacuum pumps on the market 50 Micron Air filter for reducing airborne contaminants when releasing the vacuum Silicone vacuum pad 5' of vacuum rated HVAC hose to pull a vacuum. Specification Chamber Material 3004 Aluminum Gasket Material Silicone Lid Material Glass Internal Dimensions (ID) 9" Tall x 10" Diameter Vacuum Gauge (Glycerin Filled) InHG (0)-(-30) Manifold Connections 1/4" SAE and 1/4" FNPT Temperature Rating 150°F (65°C) Additional Included Items 5' Purple Vacuum Rated HVAC HosePlatinum Cured Silicone PadBlack 50 Micro Air Filter Compatibility Explanation: BestValueVac® Chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers.The lid may only be cleaned with soapy water. DOES NOT APPLY TO GLASS LID VERSION ShatterVac® chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents. GlassVac® chambers are compatible with all solvents and stabilization resins. We only recommend and warranty GlassVac® chambers for resin infusion and wood stabilization.The lid may be cleaned with any solvent or cleaning agent. See FAQ at the top for product safety warnings. Pump Warranty Information: Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Exludes Cactus Juice™) If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void. These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties. When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.) To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min. For shipping info including Import/Export details visit our Shipping link at the bottom of the page.
$135.00
MAXTRAP105 -105°C Vacuum Cold Trap, 120V
MAXTRAP105 -105°C Vacuum Cold Trap, 120V Cascade’s MAXTRAP105 is not an ordinary lab-grade cold trap. Cascade has integrated features necessary for time-sensitive, high-throughput, production-focused vacuum purging or drying applications. MAXTRAP105 Cold Trap Includes: Cascade’s COLDWELL 304 Stainless Steel Trap Insert (Patent pending baffle system) 3 Quart Capacity (2839 ml) Viton Gasket for Vacuum Integrity Labconco -105°C Refrigerated Base Green CFC / HFC Free Refrigerants Power Cord 3mm Neoprene Insulator Cap Requires 800ml (~ 3.5 cups) of a transfer fluid such as ethanol. Not Included. Cascade recommends: ethanol, glycol, cryo-cool fluids Quality Made in USA 1 Year Warranty Connection Lines and hardware: 4′ of 1″ Diameter Vacuum Tubing with KF-25 Flanges on each side. KF-25 clamps, centering rings for the connection tube MAXTRAP Tips: Safety At very cold temperatures, solvents and even oxygen can re-condense back into liquid. This is potentially explosive. Liquid oxygen is a light blue color and can condense into a cold trap if a pump has sucked air through the trap when the trap is very cold. Always follow your standard operating procedures and safety guidelines. Don’t Stop: Keep Processing while trap is being reclaimed, cleaned, refreshed Cold traps can become full or the captured material freezes and blocks flow. For high moisture, outgassing, 24 hour processing/vacuum purging consider adding a second, spare COLDWELL trap. The secondary COLDWELL can be dropped into place so processing continues while the full trap is cleaned, defrosted. Quick Start Up Tips: Remove shipping foam from reservoir bottom prior to use Fill reservoir with 800ml (+/-3.5 cups) ethanol to marked line Monitor ethanol levels inside reservoir Allow at least 30 mins for trap to cool Keep side vents clear. Allow at least 4″ for airflow Monitor interior of stainless trap for clogging Short tube – attach to vacuum pump Tall tube – attach to vacuum oven MAXTRAP105 Differences: The key to quality cold trap performance is: time, surface area, and temperature. Time: Most cold traps have very narrow inlets and outlets, slowing down your process. Not Cascade’s MAXTRAP105! Full KF25 inlet and outlet connections never reduce flow. Surface Area: Most cold traps have glass or a smaller surface area to collect the matter your vacuum pump would otherwise ingest. Cascade’s MAXTRAP105 surface area is a patent pending series of filter baffles inside the COLDWELL stainless trap. Specifications Coldwell Stainless Trap KF25 Inlet & Outlet 3 Quart Capacity (2839 mliters) Viton Gasket Neoprene Insulator Cap Labconco -105°C Mechanical Base 115V / 1ph / 3 AMP (60Hz) Cord Included CFC / HCFC Free Refrigerants Dimensions inches 24.1 W x 23.9 D x 12.6 H cm 34.3 x 59.7 x 30.5 *Requires approximately 800ml (~ 3.5 cups) of transfer fluid(ethanol, glycol, cryo-cool fluids) Connections 1 each 4′ KF-25 flanged vacuum rated line 1 each KF-25 Centering Ring 1 each KF-25 Clamp Weight COLDWELL Stainless Trap: 14 lbs Mechanical Base: 139 lbs Shipping Weight: 190 lbs Additional Resources: Download Specs Download Supplemental Manual NTRL Certifications -105C Refrigerated Base Safety Certification
$9,950.00
KF-40 Stainless Steel FNPT End Cap
KF-40 Stainless Steel FNPT End Cap This is a FNPT KF-40 (NW40) Endcap to adapt a KF40 fitting to Female NPT Threads for 1/4", 3/8", and 1/2" NPT.
$34.00 - $39.00
Glass Vac 2 Gallon Aluminum Vacuum Chamber and Vacuum Pump Kit
Glass Vac 2 Gallon Aluminum Vacuum Chamber and Vacuum Pump Kit (Chamber comes with 2 yr. limited warranty) This is a complete BestValueVac® vacuum chamber setup designed built and 100% tested in Naperville, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs. Please refer to these charts for vacuum specifications at altitude and conversions: Vacuum at Altitude Chart Vacuum Conversion Chart This Kit Includes: Glass Vac 2 Gallon Aluminum Vacuum Chamber VE115 3CFM Single Stage Vacuum Pump or V4D 4CFM Two Stage Vacuum Pump 2 year limited warranty on the chamber 1 year limited warranty on the pump Key Features: Aluminum Vessel Highly Durable and Reversible Silicone Gasket Glycerin filled vacuum gauge User friendly vacuum connections that fit most vacuum pumps on the market 50 Micron Air filter for reducing airborne contaminants when releasing the vacuum Silicone vacuum pad 5' of vacuum rated HVAC hose to pull a vacuum. Specification Chamber Material 3004 Aluminum Gasket Material Silicone Lid Material Glass Internal Dimensions (ID) 6.5" Tall x 10" Diameter Vacuum Gauge (Glycerin Filled) InHG (0)-(-30) Manifold Connections 1/4" SAE and 1/4" FNPT Temperature Rating 150°F (65°C) Additional Included Items 5' Purple Vacuum Rated HVAC Hose Platinum Cured Silicone Pad Black 50 Micro Air Filter Models BVV4D BVV7S BVV9D Stage 2 1 2 Ultimate Vacuum (Microns) 15 75 15 Refrigerant Classes A1 Non-Toxic, Non Flammable Dimensions (in) 12.4 x 4.8 x 10.16 12.4 x 4.8 x 10.16 15 x 6.3 x 11.22 Weight (lbs) 19.4 16.5 32 Free Air Displacement 4.3 CFM 6.4 CFM 8.5 CFM Motor Size (HP) RPM 1 HP 3440 RPM Oil Capacity 10oz / 300ml 14.5oz / 410ml 24oz / 680ml Voltage 110V 60 Hz Power Cord Hard Wired 3m / 9.8' Power Cord Power Switch Standard On / Off Operating Temperature Range 32F to 125 F (0C to 52C) Gas Ballast Valve Yes No Yes Intake Fittings Stainless Steel Inlet Fitting with 1/4" SAE & 3/8" JIC Male Ports VE115 Specification Free Air Displacement - (CFM) 3CFM # Of Stages 1 Voltage 110v / 60Hz Ultimate Vacuum 5 Pa HP 1/4 Oil Capacity 280ml Weight 15LB Intake Connection 1/4" SAE & JIC Compatibility Explanation: BestValueVac® chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers. The lid may only be cleaned with soapy water. SVac® chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents. GlassVac® chambers are compatible with all solvents and stabilization resins. We only recommend and warranty GlassVac® chambers for resin infusion and wood stabilization. The lid may be cleaned with any solvent or cleaning agent. See FAQ at the top for product safety warnings. Pump Warranty Information: Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™) If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void. These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties. When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.) To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min. For shipping info including Import/Export details visit our Shipping link at the bottom of the page.
$298.00 - $453.00
10" Pre-Built BIFLOW Hemispherical Lid with BVV 316SS Full Bore Valves
10" Pre-Built BIFLOW Hemispherical Lid with BVV 316SS Full Bore Valves (This Lid is fully assembled and Nitrogen Tested for Leaks at Best Value Vacs) This 10" Best Value Vacs Hemispherical lid is fully assembled and nitrogen tested for leaks at our warehouse. This lid comes with 2 BVV 316SS Full Bore Valves with (2)1/4" and (1)3/8" 37° JIC Flares, and compound gauge. These lids are made out of 304 stainless steel and have (1) 1.5" and (2) 2" Tri-Clamp ports with the middle 1.5" port having an extended tube to control solvent flow. Key Features: Pre-built and Nitrogen Tested for Leaks BVV 316SS Full Bore Valves with 1/4" 37° JIC -40F to 450F 304 High Polish Stainless Steel Compound Gauge (-30)-0-(150PSI) Specifications Lid Material 304 Stainless Steel Valve Material 316SS Full Encapsulated PTFE Core - 1/4 Turn Flare Size (2) 1/4" and (1) 3/8" 37° JIC Tri-Clamp Size(s) (1) 1.5" Ports x (2) 2" x 10" Tri-Clamp Nitrogen Tested Yes
$370.00
8" Pre-Built Hemispherical Lid with BVV 316SS Full Bore Valves
8" Pre-Built Hemispherical Lid with BVV 316SS Full Bore Valves (This Lid is fully assembled and Nitrogen Tested for Leaks at Best Value Vacs) This 8" Best Value Vacs Hemispherical lid is fully assembled and nitrogen tested for leaks at our warehouse. This lid comes with 2 BVV 316SS Full Bore Valves with 1/4" 37° JIC Flares, compound gauge and the 4th hole is plugged to allow for future expansion. These lids are made out of 304 stainless steel and have (3) 1.5" Tri-Clamp ports with the middle 1.5" port having an extended tube to control solvent flow. Key Features: Pre-built and Nitrogen Tested for Leaks BVV 316SS Full Bore Valves with 1/4" 37° JIC -40F to 450F 304 High Polish Stainless Steel Compound Gauge (-30)-0-(150PSI) Specifications Lid Material 304 Stainless Steel Valve Material 316SS Full Encapsulated PTFE Core - 1/4 Turn Flare Size (2)1/4" 37° JIC Tri-Clamp Size(s) (3) 1.5" Ports x x 8" Tri-Clamp Nitrogen Tested Yes
$325.00
MAXTRAP50: -50°C Vacuum Cold Trap
MAXTRAP50: -50°C Vacuum Cold Trap There are numerous laboratory grade cold traps on the market and everyone agrees they are a best practice tool for preserving/extending vacuum pump life or the time between vacuum pump maintenance. Cascade’s MAXTRAP50 is not an ordinary lab-grade cold trap. Cascade has taken our extensive knowledge of vacuum best practices and integrated the features necessary for our customers with time-sensitive, high-throughput, production-focused vacuum purging or drying applications. Complete System Includes: Cascade’s COLDWELL 304 Stainless Steel Trap – patent pending baffle system. 3 Quart Capacity (2839 mliters) Viton Gasket Labconco -50°C Refrigerated Base Green CFC / HFC Free Refrigerants KF-25 Inlet/Outlet, 1 each 4′ Connection Line with KF-25 flanges, clamps, centering ring Power Cord 3mm Neoprene Insulator Cap Requires 800ml (~ 3.5 cups) of a transfer fluid such as ethanol. Not Included. Cascade recommends: ethanol, glycol, cryo-cool fluids Quality Made in USA 1 Year Warranty MAXTRAP Tips: Safety At very cold temperatures, solvents and even oxygen can re-condense back into liquid. This is potentially explosive. Liquid oxygen is a light blue color and can condense into a cold trap if a pump has sucked air through the trap when the trap is very cold. Always follow your standard operating procedures and safety guidelines. Don’t Stop: Keep Processing while trap is being reclaimed, cleaned, refreshed Cold traps can become full or the captured material freezes and blocks flow. For high moisture, outgassing, 24 hour processing/vacuum purging consider adding a second, spare COLDWELL trap. The secondary COLDWELL can be dropped into place so processing continues while the full trap is cleaned, defrosted. Quick Start Up Tips: Remove shipping foam from reservoir bottom prior to use Fill reservoir with 800ml (+/-3.5 cups) ethanol to marked line Monitor ethanol levels inside reservoir Allow at least 30 mins for trap to cool Keep side vents clear. Allow at least 4″ for airflow Monitor interior of stainless trap for clogging Short tube – attach to vacuum pump Tall tube – attach to vacuum oven MAXTRAP50 Differences: The key to quality cold trap performance is: time, surface area, and temperature. Time: Most cold traps have very narrow inlets and outlets, slowing down your process. Not Cascade’s MAXTRAP50! Full KF25 inlet and outlet connections never reduce flow. Surface Area: Most cold traps have glass or a smaller surface area to collect the matter your vacuum pump would otherwise ingest. Cascade’s MAXTRAP50 surface area is a patent pending series of filter baffles inside the COLDWELL stainless trap. Temperature: Cascade’s MAXTRAP50 features the mechanically refrigerated system built in the USA by Thermo Scientific – a leader in laboratory equipment. Specifications Coldwell Stainless Trap KF25 Inlet & Outlet 3 Quart Capacity (2839 mliters) Viton Gasket Neoprene Insulator Cap Labconco -50°C Mechanical Base 115V / 1ph / 3 AMP (60Hz) Cord Included CFC / HCFC Free Refrigerants Dimensions inches 13.5 W x 23.5 D x 12.0 H cm 34.3 x 59.7 x 30.5 *Requires approximately 800ml (~ 3.5 cups) of transfer fluid(ethanol, glycol, cryo-cool fluids) Connections 1 each 4′ KF-25 flanged vacuum rated line 1 each KF-25 Centering Ring 1 each KF-25 Clamp Weight COLDWELL Stainless Trap: 14 lbs Thermo Mechanical Base: 60 lbs Shipping Weight: 95 lbs Additional Resources: Download Specs Download Supplemental Manual NRTL Certifications
$7,049.00
KF-50 Stainless Steel FNPT End Cap
KF-50 Stainless Steel FNPT End Cap This is a FNPT KF-50 (NW50) Endcap to adapt a KF50 fitting to Female NPT Threads for 1/4", 3/8", and 1/2" NPT.
$30.00 - $35.00
Best Value Vacs 1.5 Gallon Tall Stainless Steel Vacuum Chamber - W/GLASS LID
Best Value Vacs 1.5 Gallon Tall Stainless Steel Vacuum Chamber - W/GLASS LID This is a complete BestValueVac® vacuum chamber setup designed built and 100% tested in Naperville, Illinois. With our unique patent pending gasket design (Patent #9475627) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs. -Please Refer to these charts for vacuum specifications at altitude and conversions: Vacuum at Altitude Chart Vacuum Conversion Chart Key Features: High Strength Stainless Steel Chamber Highly Durable and Reversible Silicone Gasket Glycerin filled vacuum gauge User-friendly vacuum connections that fit most vacuum pumps on the market 50 Micron Air filter for reducing airborne contaminants when releasing the vacuum Silicone vacuum pad 5' of vacuum rated HVAC hose to pull a vacuum. Specification Chamber Material 304 - 2B Stainless Steel Gasket Material Silicone Lid Material Glass Internal Dimensions (ID) 8-5/8" Tall x 7-1/8" Diameter Vacuum Gauge (Glycerin Filled) InHG (0)-(-30) Manifold Connections 1/4" SAE and 1/4" FNPT Temperature Rating 150°F (65°C) Additional Included Items 5' Purple Vacuum Rated HVAC Hose Platinum Cured Silicone Pad Black 50 Micro Air Filter Compatibility Explanation: BestValueVac® Chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers.The lid may only be cleaned with soapy water. DOES NOT APPLY TO GLASS LID VERSION ShatterVac® chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents. GlassVac® chambers are compatible with all solvents and stabilization resins. We only recommend and warranty GlassVac® chambers for resin infusion and wood stabilization.The lid may be cleaned with any solvent or cleaning agent. See FAQ at the top for product safety warnings. Pump Warranty Information: Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Exludes Cactus Juice™) If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void. These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties. When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.) To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.
$115.00
Dark City Molds Triangle Gummy Molds
Dark City Molds Triangle Gummy Molds Sizes Available 2.66mL Triangle 2.8mL Tetrahedron 4.1mL 8 Triangle Mold Properties 100% FDA Approved Food-Contact Safe Platinum Silicone Temperature Resistant - Freezer, Dishwasher & Oven Safe Half Sheet Molds Are Optimized to Fit 2 Molds Per 18” x 26” Full Size Baking Sheet Strategically Designed Geometry Optimized For Rapid Extraction Proprietary Natural Slip Finish For Oil Free Workflow Precision Diamond Tooled Masters For Superior Detail & Finish Guaranteed Highest Resolution Designs On The Market Rapid Demolding Rates - Extract up to 1000+ Gummies Per Minute Perfect for Gummies, Hard Candies, Caramels, Chews, Chocolates, and More 6-10 Year Expected Lifetime with Proper Care & Use OUR PROMISE Every mold that leaves our facility is covered by DCM’s 18 Month Gold Standard Warranty. If you experience any issues within that period, we'll immediately exchange the mold in question. No hassle. No fuss. Highest quality platinum silicone molds in the world. Whether you’re manufacturing gummies, hard candies, caramels, chews, or other confections, our diamond tooled molds will provide superior finish and detail to ensure maximal aesthetic clarity and operational efficiency for your manufacturing workflow. We’re proud to offer best-in-industry performance with our Rose Pro Series™ silicones as well as the most competitive price points on translucent platinum molds currently available. *Assumes a 1ml : 1.4g recipe ratio. Since weight is a metric of a recipe's specific density, we cannot exactly determine the weight of your specific recipe. Please consult the designated volume (ml) specification above to calculate a more exact weight (g) reading. All Dark City Gold Standard SOPs yield a 1ml : 1.4g ratio. Mold Specifications Sizes Avaliable (Volume) Shape Pieces Per Mold Weight Material Options Mold Dimensions Compatibility Square Molds 2.5mL Square 134 3.5g Rose Pro Series, Translucent 280mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 2.85mL Square 234 3.5g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 3.57mL Square 120 5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 192 5.6g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 6mL Square 165 8.4g Rose Pro Series, Translucent 391.6mm x 286.5mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 1.5g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor, Baker Perkins ServoForm Mini 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Triangle Molds 2.66mL Triangle 210 3.7g Rose Pro Series, Translucent 280mm x 379.7mm Hand Fill, Flood & Scrape, Universal Depositor 2.8mL Tetrahedron 95 3.9g Rose Pro Series, Translucent 135mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 4.1mL Triangle 160 5.7g Rose Pro Series, Translucent 285mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor Multidose Molds 2.25mL Cube 144 3.2g Rose Pro Series, Translucent 254mm x 355mm Hand Fill, Flood & Scrape, Universal Depositor 3.3mL Rhombus 209 4.6g(each segment: 2.3g*) Rose Pro Series, Translucent 284mm x 375.4mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 165 5.5g Rose Pro Series, Translucent 289mm x 380mm Hand Fill, Flood & Scrape, Universal Depositor 12.5mL Rectangle 60 17.5g Rose Pro Series, Translucent 279.3mm x 385.2mm Hand Fill, Flood & Scrape, Universal Depositor 23.5mL Square Rope 20 32g (each segment: 3.2g*) Rose Pro Series, Translucent 258mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 42.4mL Rectangle 18 59.4g Rose Pro Series, Translucent 240.9mm x 381.3mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 15.g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Coin Mold 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 2.17mL Coin 176 3g Rose Pro Series, Translucent 289mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 3.26mL Coin 165 4.6g Rose Pro Series, Translucent 289mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL Puck 88 9.9g Rose Pro Series, Translucent 283.2mm x 390.2mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL (Bit) Coin 88 9.9g Rose Pro Series, Translucent 280.2mm x 386.1mm Hand Fill, Flood & Scrape, Universal Depositor 34.3mL Coin 35 48g Rose Pro Series, Translucent 268.1mm x 371.7mm Hand Fill, Flood & Scrape, Universal Depositor 45.2mL Coin 20 63.3g Rose Pro Series, Translucent 293.0mm x 365.3mm Hand Fill, Flood & Scrape, Universal Depositor Gum Drop 1.3mL Gum Drop 388 1.82g Rose Pro Series, Translucent 286mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 2.15mL Gum Drop 176 3g Rose Pro Series, Translucent 289mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 3.6mL Gum Drop 140 5g Rose Pro Series, Translucent 259mm x 363.6mm Hand Fill, Flood & Scrape, Universal Depositor
$150.00 - $250.00
12" Tri-Clamp Dewaxer Columns
12" Tri-Clamp/ Tri Clover Dewaxing Columns This is a 12" Tri-Clamp BVV™ Tri-Clamp Dewaxing Spool. It is intended to have dry ice put into the sleeve to chill the material inside the column. **Note: When selecting a Pipe Hanger choose the size that correlates to the Sleeve OD NOT Spool OD Sizes Available: 12" x 12" Tri-Clamp Dewaxer Column Specifications: Tri-Clamp Size 3" Material 304 Stainless Steel Standard 3A High Polish Sleeve OD 14.000" Spool ID 11.732" Spool OD 12" Flange OD 12.57" Bead Center 12.17" Drain Port 1/4"-18 FNPT (Drain Plug Included) OD = Outer Dimension ID = Inner Dimension Disclaimer to Customer: User assumes all responsibility and risks of the system for all Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractors. They DO NOT come with a standard 1 year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.
$345.00
Dark City Molds Gumdrop Gummy Molds
Dark City Molds Gumdrop Gummy Molds Available Sizes: 1.3mL 2.15mL 3.6mL MOLD PROPERTIES 100% FDA Approved Food-Contact Safe Platinum Silicone Temperature Resistant - Freezer, Dishwasher & Oven Safe Half Sheet Molds Are Optimized to Fit 2 Molds Per 18” x 26” Full Size Baking Sheet Strategically Designed Geometry Optimized For Rapid Extraction Proprietary Natural Slip Finish For Oil Free Workflow Precision Diamond Tooled Masters For Superior Detail & Finish Guaranteed Highest Resolution Designs On The Market Rapid Demolding Rates - Extract up to 1000+ Gummies Per Minute Perfect for Gummies, Hard Candies, Caramels, Chews, Chocolates, and More 6-10 Year Expected Lifetime with Proper Care & Use OUR PROMISE Every mold that leaves our facility is covered by DCM’s 18 Month Gold Standard Warranty. If you experience any issues within that period, we'll immediately exchange the mold in question. No hassle. No fuss. Committed to creating the highest quality platinum silicone molds in the world. Whether you’re manufacturing gummies, hard candies, caramels, chews, or other confections, our diamond tooled molds will provide superior finish and detail to ensure maximal aesthetic clarity and operational efficiency for your manufacturing workflow. We’re proud to offer best-in-industry performance with our Rose Pro Series™ silicones as well as the most competitive price points on translucent platinum molds currently available. *Assumes a 1ml : 1.4g recipe ratio. Since weight is a metric of a recipe's specific density, we cannot exactly determine the weight of your specific recipe. Please consult the designated volume (ml) specification above to calculate a more exact weight (g) reading. All Dark City Gold Standard SOPs yield a 1ml : 1.4g ratio. Mold Specifications Sizes Avaliable (Volume) Shape Pieces Per Mold Weight Material Options Mold Dimensions Compatibility Square Molds 2.5mL Square 134 3.5g Rose Pro Series, Translucent 280mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 2.85mL Square 234 3.5g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 3.57mL Square 120 5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 192 5.6g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 6mL Square 165 8.4g Rose Pro Series, Translucent 391.6mm x 286.5mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 1.5g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor, Baker Perkins ServoForm Mini 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Triangle Molds 2.66mL Triangle 210 3.7g Rose Pro Series, Translucent 280mm x 379.7mm Hand Fill, Flood & Scrape, Universal Depositor 2.8mL Tetrahedron 95 3.9g Rose Pro Series, Translucent 135mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 4.1mL Triangle 160 5.7g Rose Pro Series, Translucent 285mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor Mutidose Molds 2.25mL Cube 144 3.2g Rose Pro Series, Translucent 254mm x 355mm Hand Fill, Flood & Scrape, Universal Depositor 3.3mL Rhombus 209 4.6g(each segment: 2.3g*) Rose Pro Series, Translucent 284mm x 375.4mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 165 5.5g Rose Pro Series, Translucent 289mm x 380mm Hand Fill, Flood & Scrape, Universal Depositor 12.5mL Rectangle 60 17.5g Rose Pro Series, Translucent 279.3mm x 385.2mm Hand Fill, Flood & Scrape, Universal Depositor 23.5mL Square Rope 20 32g (each segment: 3.2g*) Rose Pro Series, Translucent 258mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 42.4mL Rectangle 18 59.4g Rose Pro Series, Translucent 240.9mm x 381.3mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 15.g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Coin Mold 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 2.17mL Coin 176 3g Rose Pro Series, Translucent 289mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 3.26mL Coin 165 4.6g Rose Pro Series, Translucent 289mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL Puck 88 9.9g Rose Pro Series, Translucent 283.2mm x 390.2mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL (Bit) Coin 88 9.9g Rose Pro Series, Translucent 280.2mm x 386.1mm Hand Fill, Flood & Scrape, Universal Depositor 34.3mL Coin 35 48g Rose Pro Series, Translucent 268.1mm x 371.7mm Hand Fill, Flood & Scrape, Universal Depositor 45.2mL Coin 20 63.3g Rose Pro Series, Translucent 293.0mm x 365.3mm Hand Fill, Flood & Scrape, Universal Depositor Gum Drop 1.3mL Gum Drop 388 1.82g Rose Pro Series, Translucent 286mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 2.15mL Gum Drop 176 3g Rose Pro Series, Translucent 289mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 3.6mL Gum Drop 140 5g Rose Pro Series, Translucent 259mm x 363.6mm Hand Fill, Flood & Scrape, Universal Depositor
$150.00 - $250.00
Weld On Flanged Sight Glass : 400psi Rated
Weld On Flanged Sight Glass : 400psi Rated These sight glasses are made of AISI 304 Stainless Steel and must be welded to the vessel that they are being used on. These flanged sight glasses are capable of holding up to 400 PSI. The sight windows options are 1.5" and 2", dimensions as follow: 1.5" Height- 2" Diameter- 4.72" Bolt Circle- 3.6" 2" Height- 2" Diameter- 5.51" Bolt Circle- 4.17"
$80.00$60.00
Dark City Molds Gem Gummy Mold
Dark City Molds Gem Gummy Mold Available Sizes: 2.85mL- Square Gem 2.85mL- Jewel Gem 4.3mL- Rectangle Gem MOLD PROPERTIES 100% FDA Approved Food-Contact Safe Platinum Silicone Temperature Resistant - Freezer, Dishwasher & Oven Safe Half Sheet Molds Are Optimized to Fit 2 Molds Per 18” x 26” Full Size Baking Sheet Strategically Designed Geometry Optimized For Rapid Extraction Proprietary Natural Slip Finish For Oil Free Workflow Precision Diamond Tooled Masters For Superior Detail & Finish Guaranteed Highest Resolution Designs On The Market Rapid Demolding Rates - Extract up to 1000+ Gummies Per Minute Perfect for Gummies, Hard Candies, Caramels, Chews, Chocolates, and More 6-10 Year Expected Lifetime with Proper Care & Use OUR PROMISE Every mold that leaves our facility is covered by DCM’s 18 Month Gold Standard Warranty. If you experience any issues within that period, we'll immediately exchange the mold in question. No hassle. No fuss. Committed to creating the highest quality platinum silicone molds in the world. Whether you’re manufacturing gummies, hard candies, caramels, chews, or other confections, our diamond tooled molds will provide superior finish and detail to ensure maximal aesthetic clarity and operational efficiency for your manufacturing workflow. We’re proud to offer best-in-industry performance with our Rose Pro Series™ silicones as well as the most competitive price points on translucent platinum molds currently available. *Assumes a 1ml : 1.4g recipe ratio. Since weight is a metric of a recipe's specific density, we cannot exactly determine the weight of your specific recipe. Please consult the designated volume (ml) specification above to calculate a more exact weight (g) reading. All Dark City Gold Standard SOPs yield a 1ml : 1.4g ratio.
$150.00 - $250.00
Dark City Molds Square Gummy Molds
Square Gummy Mold Available Sizes: 2.5mL 2.85mL 3.5mL 4mL 6mL MOLD SPECIFICATIONS Shape: Square Volume: 6ml Estimated weight: 8.4g* Cavity dimensions: 22.2mm x 22.2mm x 12.7mm Mold dimensions: 391.6mm x 286.5mm Pieces per mold: 165 Compatibility: Hand Fill, Flood & Scrape, Universal Depositor Material options: Rose Pro, Platinum Pro MOLD PROPERTIES 100% FDA Approved Food-Contact Safe Platinum Silicone Temperature Resistant - Freezer, Dishwasher & Oven Safe Half Sheet Molds Are Optimized to Fit 2 Molds Per 18” x 26” Full Size Baking Sheet Strategically Designed Geometry Optimized For Rapid Extraction Proprietary Natural Slip Finish For Oil Free Workflow Precision Diamond Tooled Masters For Superior Detail & Finish Guaranteed Highest Resolution Designs On The Market Rapid Demolding Rates - Extract up to 1000+ Gummies Per Minute Perfect for Gummies, Hard Candies, Caramels, Chews, Chocolates, and More 6-10 Year Expected Lifetime with Proper Care & Use OUR PROMISE Every mold that leaves our facility is covered by DCM’s 18 Month Gold Standard Warranty. If you experience any issues within that period, we'll immediately exchange the mold in question. No hassle. No fuss. Committed to creating the highest quality platinum silicone molds in the world. Whether you’re manufacturing gummies, hard candies, caramels, chews, or other confections, our diamond tooled molds will provide superior finish and detail to ensure maximal aesthetic clarity and operational efficiency for your manufacturing workflow. We’re proud to offer best-in-industry performance with our Rose Pro Series™ silicones as well as the most competitive price points on translucent platinum molds currently available. *Assumes a 1ml : 1.4g recipe ratio. Since weight is a metric of a recipe's specific density, we cannot exactly determine the weight of your specific recipe. Please consult the designated volume (ml) specification above to calculate a more exact weight (g) reading. All Dark City Gold Standard SOPs yield a 1ml : 1.4g ratio. Mold Specifications Sizes Avaliable (Volume) Shape Pieces Per Mold Weight Material Options Mold Dimensions Compatibility Square Molds 2.5mL Square 134 3.5g Rose Pro Series, Translucent 280mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 2.85mL Square 234 3.5g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 3.57mL Square 120 5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 192 5.6g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 6mL Square 165 8.4g Rose Pro Series, Translucent 391.6mm x 286.5mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 1.5g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor, Baker Perkins ServoForm Mini 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Triangle Molds 2.66mL Triangle 210 3.7g Rose Pro Series, Translucent 280mm x 379.7mm Hand Fill, Flood & Scrape, Universal Depositor 2.8mL Tetrahedron 95 3.9g Rose Pro Series, Translucent 135mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 4.1mL Triangle 160 5.7g Rose Pro Series, Translucent 285mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor Mutidose Molds 2.25mL Cube 144 3.2g Rose Pro Series, Translucent 254mm x 355mm Hand Fill, Flood & Scrape, Universal Depositor 3.3mL Rhombus 209 4.6g(each segment: 2.3g*) Rose Pro Series, Translucent 284mm x 375.4mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 165 5.5g Rose Pro Series, Translucent 289mm x 380mm Hand Fill, Flood & Scrape, Universal Depositor 12.5mL Rectangle 60 17.5g Rose Pro Series, Translucent 279.3mm x 385.2mm Hand Fill, Flood & Scrape, Universal Depositor 23.5mL Square Rope 20 32g (each segment: 3.2g*) Rose Pro Series, Translucent 258mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 42.4mL Rectangle 18 59.4g Rose Pro Series, Translucent 240.9mm x 381.3mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 15.g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Coin Mold 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 2.17mL Coin 176 3g Rose Pro Series, Translucent 289mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 3.26mL Coin 165 4.6g Rose Pro Series, Translucent 289mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL Puck 88 9.9g Rose Pro Series, Translucent 283.2mm x 390.2mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL (Bit) Coin 88 9.9g Rose Pro Series, Translucent 280.2mm x 386.1mm Hand Fill, Flood & Scrape, Universal Depositor 34.3mL Coin 35 48g Rose Pro Series, Translucent 268.1mm x 371.7mm Hand Fill, Flood & Scrape, Universal Depositor 45.2mL Coin 20 63.3g Rose Pro Series, Translucent 293.0mm x 365.3mm Hand Fill, Flood & Scrape, Universal Depositor Gum Drop 1.3mL Gum Drop 388 1.82g Rose Pro Series, Translucent 286mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 2.15mL Gum Drop 176 3g Rose Pro Series, Translucent 289mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 3.6mL Gum Drop 140 5g Rose Pro Series, Translucent 259mm x 363.6mm Hand Fill, Flood & Scrape, Universal Depositor
$150.00 - $250.00
Dark City Molds Coin Gummy Molds
Coin Gummy Molds Sizes Available: 2.15mL 2.17mL 2.5mL (20 Minimum to Order!) 3.26mL (Triangle State Design) 7.1mL 7.1mL (Bitcoin Design) 34.3mL 45.2mL MOLD PROPERTIES 100% FDA Approved Food-Contact Safe Platinum Silicone Temperature Resistant - Freezer, Dishwasher & Oven Safe Half Sheet Molds Are Optimized to Fit 2 Molds Per 18” x 26” Full Size Baking Sheet Strategically Designed Geometry Optimized For Rapid Extraction Proprietary Natural Slip Finish For Oil Free Workflow Precision Diamond Tooled Masters For Superior Detail & Finish Guaranteed Highest Resolution Designs On The Market Rapid Demolding Rates - Extract up to 1000+ Gummies Per Minute Perfect for Gummies, Hard Candies, Caramels, Chews, Chocolates, and More 6-10 Year Expected Lifetime with Proper Care & Use OUR PROMISE Every mold that leaves our facility is covered by DCM’s 18 Month Gold Standard Warranty. If you experience any issues within that period, we'll immediately exchange the mold in question. No hassle. No fuss. Committed to creating the highest quality platinum silicone molds in the world. Whether you’re manufacturing gummies, hard candies, caramels, chews, or other confections, our diamond tooled molds will provide superior finish and detail to ensure maximal aesthetic clarity and operational efficiency for your manufacturing workflow. We’re proud to offer best-in-industry performance with our Rose Pro Series™ silicones as well as the most competitive price points on translucent platinum molds currently available. *Assumes a 1ml : 1.4g recipe ratio. Since weight is a metric of a recipe's specific density, we cannot exactly determine the weight of your specific recipe. Please consult the designated volume (ml) specification above to calculate a more exact weight (g) reading. All Dark City Gold Standard SOPs yield a 1ml : 1.4g ratio.
$150.00 - $250.00
Dark City Molds Cube Gummy Mold
Cube Gummy Mold Available Sizes: 1mL 1.6mL 2.2mL 3.4mL MOLD PROPERTIES 100% FDA Approved Food-Contact Safe Platinum Silicone Temperature Resistant - Freezer, Dishwasher & Oven Safe Half Sheet Molds Are Optimized to Fit 2 Molds Per 18” x 26” Full Size Baking Sheet Strategically Designed Geometry Optimized For Rapid Extraction Proprietary Natural Slip Finish For Oil Free Workflow Precision Diamond Tooled Masters For Superior Detail & Finish Guaranteed Highest Resolution Designs On The Market Rapid Demolding Rates - Extract up to 1000+ Gummies Per Minute Perfect for Gummies, Hard Candies, Caramels, Chews, Chocolates, and More 6-10 Year Expected Lifetime with Proper Care & Use OUR PROMISE Every mold that leaves our facility is covered by DCM’s 18 Month Gold Standard Warranty. If you experience any issues within that period, we'll immediately exchange the mold in question. No hassle. No fuss. Creating the highest quality platinum silicone molds in the world. Whether you’re manufacturing gummies, hard candies, caramels, chews, or other confections, our diamond tooled molds will provide superior finish and detail to ensure maximal aesthetic clarity and operational efficiency for your manufacturing workflow. We’re proud to offer best-in-industry performance with our Rose Pro Series™ silicones as well as the most competitive price points on translucent platinum molds currently available. *Assumes a 1ml : 1.4g recipe ratio. Since weight is a metric of a recipe's specific density, we cannot exactly determine the weight of your specific recipe. Please consult the designated volume (ml) specification above to calculate a more exact weight (g) reading. All Dark City Gold Standard SOPs yield a 1ml : 1.4g ratio. Mold Specifications Sizes Avaliable (Volume) Shape Pieces Per Mold Weight Material Options Mold Dimensions Compatibility Square Molds 2.5mL Square 134 3.5g Rose Pro Series, Translucent 280mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 2.85mL Square 234 3.5g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 3.57mL Square 120 5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 192 5.6g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 6mL Square 165 8.4g Rose Pro Series, Translucent 391.6mm x 286.5mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 1.5g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor, Baker Perkins ServoForm Mini 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Triangle Molds 2.66mL Triangle 210 3.7g Rose Pro Series, Translucent 280mm x 379.7mm Hand Fill, Flood & Scrape, Universal Depositor 2.8mL Tetrahedron 95 3.9g Rose Pro Series, Translucent 135mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 4.1mL Triangle 160 5.7g Rose Pro Series, Translucent 285mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor Mutidose Molds 2.25mL Cube 144 3.2g Rose Pro Series, Translucent 254mm x 355mm Hand Fill, Flood & Scrape, Universal Depositor 3.3mL Rhombus 209 4.6g(each segment: 2.3g*) Rose Pro Series, Translucent 284mm x 375.4mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 165 5.5g Rose Pro Series, Translucent 289mm x 380mm Hand Fill, Flood & Scrape, Universal Depositor 12.5mL Rectangle 60 17.5g Rose Pro Series, Translucent 279.3mm x 385.2mm Hand Fill, Flood & Scrape, Universal Depositor 23.5mL Square Rope 20 32g (each segment: 3.2g*) Rose Pro Series, Translucent 258mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 42.4mL Rectangle 18 59.4g Rose Pro Series, Translucent 240.9mm x 381.3mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 15.g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Coin Mold 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 2.17mL Coin 176 3g Rose Pro Series, Translucent 289mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 3.26mL Coin 165 4.6g Rose Pro Series, Translucent 289mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL Puck 88 9.9g Rose Pro Series, Translucent 283.2mm x 390.2mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL (Bit) Coin 88 9.9g Rose Pro Series, Translucent 280.2mm x 386.1mm Hand Fill, Flood & Scrape, Universal Depositor 34.3mL Coin 35 48g Rose Pro Series, Translucent 268.1mm x 371.7mm Hand Fill, Flood & Scrape, Universal Depositor 45.2mL Coin 20 63.3g Rose Pro Series, Translucent 293.0mm x 365.3mm Hand Fill, Flood & Scrape, Universal Depositor Gum Drop 1.3mL Gum Drop 388 1.82g Rose Pro Series, Translucent 286mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 2.15mL Gum Drop 176 3g Rose Pro Series, Translucent 289mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 3.6mL Gum Drop 140 5g Rose Pro Series, Translucent 259mm x 363.6mm Hand Fill, Flood & Scrape, Universal Depositor
$150.00 - $250.00
Enclosed Motor Switch Hazardous-Location - UL Listed / CSA Certified for MVP Recovery Pumps
Enclosed Motor Switch Hazardous-Location - UL Listed / CSA Certified for MVP Recovery Pumps This motor switch is designed for hazardous environments where ignitable gas and dust may be present. They're rated NEMA 7 and 9 for hazardous locations. Use them to turn motors on and off, or with other circuits such as lighting and electric heat circuits. They do not provide overload protection. This item also includes a 1" Male x 3/4" Female NPSM bushing and 1/2" Pipe nipple for steel conduit. Specifications Switch Type Motor Control Reversing Capability Nonreversing Number of Circuits Controlled 2 Electrical Phase (hp) Single (3 hp @ 240 V AC) Switch Starting Position 2 Off (Normally Open) Switch Action Stays Switched (Maintained) Industry Designation DPST-NO Switching: Current 30 A Voltage 600V AC Housing: Material Painted Aluminum Color Gray Height 6.5" Width 3" Depth 4.3" Number of Mounting Holes 2 Mounting Hole Diameter 0.31" Mounting Fasteners Included No Wire Connection Type Screw Terminals Environment Hazardous Location Environment Rating NEMA 7, NEMA 9 Specifications Met UL Listed, CSA Certified RoHS Not Compliant REACH Not Compliant DFARS Specialty Metals COTS-Exempt Country of Origin Mexico
$400.00
Huber VPC Bypass M30x1,5
huber VPC Bypass M30x1,5 VPC Bypass M30x1,5Stepless controlled VPC bypass M30x1,5 (not mounted on unit) for Unistatstemperature range: -90°C ... 200°C Bypass supplied separately for mounting in pipework (at the application), and can be mounted on fixed piping or on hoses. Ingress protection class IP 20 (internal location) temperature range: -90°C...200°C for units with pumps up to 6 bar.
$9,910.00
You have seen 163 out of 163 products