Fittings and Adapters

39 products


  • BVV 37° MJIC X FNPT Shop All Categories BVV 1/2-inch MJIC X 3/8-inch FNPT

    37 Degree MJIC X FNPT

    BVV™ 37° MJIC X FNPT BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are 37° JIC threads and NPT threads (National Pipe Taper) and will compress against other Female/Male NPT threads creating a tighter and tighter connection. All NPT threads require thread sealant to create a watertight and gas-tight seal between the threads. We recommend using Yellow Gas PTFE Tape because it is rated for gases and is UL listed and it is NOT recommended to use white PTFE tape because it is not rated for gas service. The 37° JIC connection will create a seal by compressing the flared end against an opposite female/male flared connection. JIC connections do not require thread sealant because they seal off the flared surface of the fitting JIC Fittings are also not the same size as NPT fittings but do have the same size nomenclature. When connecting JIC fittings to one another it is recommended by BVV™ to use 2 wrenches - 1 to tighten the fitting and 1 to hold back against the force applied to create resistance and ensure a better seal. A MJIC X FNPT connector will convert and adapt Male NPT connection to a Male JIC connection or vise-versa. These MJIC x FNPT fittings are the industry standard for extraction systems and allow a multitude of configurations on any system. BVV™ MJIC x FNPT - Data Sheet

    $5.00 - $15.00

  • BVV Bushing Shop All Categories BVV 3/8-inch FNPT X 1/2-inch MNPT

    BVV Bushing

    BVV™ Bushing BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are NPT threads (National Pipe Taper) and will compress against other Female/Male NPT threads creating a tighter and tighter connection. All NPT threads require thread sealant to create a watertight and gas-tight seal between the threads. We recommend using Yellow Gas PTFE Tape because it is rated for gases and is UL listed and it is NOT recommended to use white PTFE tape because it is not rated for gas service.     **NOTE: Pre-Taped option comes from BVV Pre-taped with Yellow UL Listed Gas PTFE Tape on the Male NPT threads ONLY for a +0.50c charge per male npt end. (JIC Threads DO NOT need to be taped.)   Stainless Steel Reducing bushings will convert the sizes of an NPT threaded connection to an either bigger or smaller sized NPT connection. As an example this fitting allows the user to convert a 1/4" NPT threaded connection to a 1/2" NPT threaded connection. BVV™ Bushing - Data Sheet Specifications Material 304 Stainless Steel Connection Type(s): 1/4"-18 MNPT 3/8"-18 MNPT 1/2"-14 MNPT 1/4"-18 FNPT 3/8"-18 FNPT 1/2"-14 FNPT Sizes Available: 1/4" FNPT x 1/4" MNPT 1/4" FNPT x 3/8" MNPT 1/4" FNPT x 1/2" MNPT 3/8" FNPT x 1/4" MNPT 3/8" FNPT x 3/8" MNPT 3/8" FNPT x 1/2" MNPT 1/2" FNPT x 1/4" MNPT

    $5.00 - $12.50

  • BVV 37° MJIC Union Shop All Categories BVV 1/2-inch

    37 Degree MJIC Union

    BVV™ 37° MJIC Union BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are 37° JIC threads and will create a seal by compressing the flared end against an opposite female/male flared connection. JIC connections do not require thread sealant because they seal off the flared surface of the fitting JIC Fittings are also not the same size as NPT fittings but do have the same size nomenclature. When connecting JIC fittings to one another it is recommended by BVV™ to use 2 wrenches - 1 to tighten the fitting and 1 to hold back against the force applied to create resistance and ensure a better seal. A MJIC Union allows the user to connect multiple JIC hoses together to their system and use it as a splitter or any other type of extractor accessory with Female JIC ends. This MJIC Union also allows the user to attach different sized Female JIC connectors together. BVV™ 37° MJIC Union - Data Sheet    Specifications Material 304 Stainless Steel Connection Type(s): 1/4" 37° MJIC (7/16-20) 3/8" 37° MJIC (9/16-18) Sizes Available: 1/4" 3/8" x 1/4" 3/8"

  • Female NPT Stainless Steel Sight Glass Shop All Categories BVV

    Compact In-line Sight Glass Female NPT Stainless Steel (Flow Sight)

    The body of the flow sight is 304 stainless steel. The glass sight has a pressure tight, solid gasket design with Viton seals. The unit tolerates temperatures up to 180° F. The maximum recommended pressure is 125 PSI. BVV™ FNPT Stainless Steel Sight Glass - Data Sheet Specifications 1/4" 3/8" 1/2" 1" Body Material 304 Stainless Steel Gasket Material Viton Length 2-3/16" 2-1/4" 2-1/2" 2-7/8" Width 7/8" 1" 1-1/4" 2" Viewing Port Size 1" 1-1/8" 1-3/16" 1-1/4" PSI Rating 150 150 100 100

    $74.00 - $105.00

  • BVV 37° FJIC Swivel Union  BVV 1/4-inch

    37 Degree FJIC Swivel Union

    BVV™ 37° FJIC Swivel Union BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are 37° JIC threads and will create a seal by compressing the flared end against an opposite female/male flared connection. JIC connections do not require thread sealant because they seal off the flared surface of the fitting JIC Fittings are also not the same size as NPT fittings but do have the same size nomenclature. When connecting JIC fittings to one another it is recommended by BVV™ to use 2 wrenches - 1 to tighten the fitting and 1 to hold back against the force applied to create resistance and ensure a better seal. Female JIC Swivel union allows users to attach Male JIC connectors or convert a MJIC connection to a female connection. Swivels are unique because they can be oriented to the direction the part needs to be facing. BVV™ FJIC Swivel Union - Data Sheet Specifications Material 304 Stainless Steel Connection Type(s): 1/4" 37° FJIC (7/16-20) 3/8" 37° FJIC (9/16-18) Sizes Available: 1/4" 3/8" x 1/4" 3/8"

  • BVV 37° MJIC Tee Shop All Categories BVV 1/2-inch

    37 Degree MJIC Tee

    BVV™ 37° MJIC Tee BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are 37° JIC threads and will create a seal by compressing the flared end against an opposite female/male flared connection. JIC connections do not require thread sealant because they seal off the flared surface of the fitting JIC Fittings are also not the same size as NPT fittings but do have the same size nomenclature. When connecting JIC fittings to one another it is recommended by BVV™ to use 2 wrenches - 1 to tighten the fitting and 1 to hold back against the force applied to create resistance and ensure a better seal. A MJIC Tee allows the user to connect multiple JIC hoses to their system and use it as a splitter or any other type of extractor accessory with Female JIC ends. BVV™ 37° MJIC Tee - Data Sheet

    $15.00 - $17.00

  • Brass Hose Barb x MNPT Shop All Categories BVV

    Brass Hose Barb x MNPT

    Brass Hose Barb x Male NPT Threaded Connection. This fitting adapts from Male NPT to Hose Barb Fitting for use with tubing for flow. **NOTE: Pre-Taped option comes from BVV Pre-taped with Yellow UL Listed Gas PTFE Tape on the Male NPT threads ONLY for a +0.50c charge per male npt end. (JIC Threads and Barbs DO NOT need to be taped.) Sizes Available: 1/4" Barb x 1/4" MNPT 3/8" Barb x 1/4" MNPT 1/2" Barb x 1/4" MNPT 3/8" Barb x 3/8" MNPT 3/8" Barb x 3/8" MNPT 1/4" Barb x 1/2" MNPT 3/8" Barb x 1/2" MNPT 1/2" Barb x 1/2" MNPT  

    $1.00 - $1.75

  • KF-25 Bellow Fitting Hose - KIT Shop All Categories BVV 1 Meter

    KF-25 Bellow Fitting Hose - KIT

    KF-25 Bellow Fitting Hose Kit This KF25 or (NW25) bellow hose is made out of 304-grade stainless steel which allows a high vacuum to be obtained with a large flow diameter for vapors. These bellow hoses are flexible and allow the user to connect a KF25 flanged vacuum pump to a KF25 flanged vacuum oven or any other application using adapters like our KF25 x NPT or KF25 x Tri-Clamp/ Tri Clover Fittings. This kit also has 2 KF25 clamps and gaskets. What's Included? (1) KF25 Flexible 304 Stainless Steel Bellow Hose (2) KF25 Centering Gaskets with Viton O-ring (2) KF25 Aluminum Clamps Bellow Hose Sizes Available: 1 Meter(s) (3.28 Feet) 2 Meter(s) (6.56 Feet)  

    $162.00 - $197.00

  • Stainless Steel 1/4" Hose Barb x 1/4" 37° Flare Shop All Categories BVV

    Stainless Steel 1/4" Hose Barb x 1/4" 37 Degree Flare

    Stainless Steel 1/4" Hose Barb x 1/4" 37° Flare

    $6.00

  • KF-25 Flange Kit Shop All Categories BVV

    KF-25 Flange Kit

    Complete KF-25 Flange Kit     The Complete Kit for KF-25 Vacuum Fittings. Connect your flange to a pipe with this complete kit from BVV™. It includes Clamp, O-ring, and Flange

  • BVV - FJIC Cap Shop All Categories BVV 1/4-inch

    37 Degree FJIC Cap

    BVV™ - FJIC Cap   BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. JIC connections do not require thread sealant because they seal off the flared surface of the fitting JIC Fittings are also not the same size as NPT fittings but do have the same size nomenclature. When connecting JIC fittings to one another it is recommended by Best Value Vacs to use 2 wrenches - 1 to tighten the fitting and 1 to hold back against the force applied to create resistance and ensure a better seal. Female JIC caps are designed for capping off male JIC threaded connections on extraction system BVV™ FJIC Cap - Data Sheet Specifications Material 304 Stainless Steel Sizes Available: 1/4" 3/8" 1/2"

  • Vacuum Pump to KF-25 Adapter Shop All Categories BVV

    Vacuum Pump to KF-25 Adapter

    Adapts to the 1/4" connections for most vacuum pumps on the market.

    $72.00

  • KF O-ring Unclassified BVV

    KF O-ring

     KF O-ring O-ring features a depth stop for clamping with Viton O-ring also fits the following high vacuum connections. NW16 NW25 NW40 NW50

    $5.00 - $6.00

  • 1/4" Female NPT Parker Quick Disconnect - BODY Shop All Categories Parker

    1/4" Female NPT Parker Quick Disconnect - BODY

     1/4" Female NPT Parker Quick Disconnect - BODY   60 Series Couplers (hydraulic, fluids, gas, steam) up to 5000 psi, connect with ISO 7241 seriesB, 60 Series Nipples. Parker's 60 Series bave double shut-off poppet valves and are interchangeable with other quick disconnects complying with ISO Series B. These general purpose quick couplings are available in a wide range of sizes and materials to be versatile for use with several fluids, including high temperature steam. Parker's 60 Series is multi-purpose for a vareity of applications and pressures up to 5000 PSI. Steam version couplers are brass with double interface O-rings and stainless steel locking balls. Seal material is Ethylene Propylene and 3/8"" size has a grip-ring sleeve for easy operation when wearing gloves   Technical Specifications: Maximum Working Pressure (PSI) 5000 Maximum Working Pressure (BAR) 340 Flow Rate (GPM) 3 Flow Rate (LPM) 11 Media Hydraulic Industry Standards ISO 7241-1, Series B Coupling Half Coupler Minimum Working Temperature (F) -40 Minimum Working Temperature (C) -40 Maximum Working Temperature (F) 250 Maximum Working Temperature (C) 121 Valve Style Poppet Sleeve Type Manual Sleeve Locking Mechanism Locking Balls Vacuum Rating (INCH of HG) 27.4 Vacuum Rating (BAR) -0.9 Thread Style Female       Technical Characteristics Sizes: 1/8" - 2-1/2" Materials: Steel, Brass, 303 Stainless Steel, 316 Stainless Steel Port Ends: Female NPTF, Female ORB Seal Options: Coupler Options include: Markets Industrial Construction Chemical Processing Commercial Cleaning Agriculture Features/Benefits: Globally interchangeable with other manufacturer's couplings complying to ISO 7241 series B Multi-purpose coupling, widely used in varied applicationsSteel couplers have a hardened sleeve for strength and durability Metal valve stop prevents flow checking to provide steady performance Steam version couplers have Ethylene Propylene seals to withstand high temperatures and the 3/8"" has a grip-ring sleeve for easy operation when wearing gloves. Brass couplers have double O-rings for redundant sealing and stainless steel locking balls for corrosion resistance 316 Stainless Steel couplers have Flourocarbon seals for checmical compatibility Optional coupler sleeve lock helps to prevent accidental disconnection Applications Industrial hydraulic lines Food and chemical processing Water and coolant lines High pressure fluid transfer High temperature fluid transfer Mobile equipment Cleaning equipment Dry cleaning Steam Systems

    $90.00

  • 1/4" Female NPT Parker Quick Disconnect - STEM Shop All Categories Parker

    1/4" Female NPT Parker Quick Disconnect - STEM

    1/4" Female NPT Parker Quick Disconnect - STEM   60 Series Nipples ( hydraulic, fluids, gas, steam up to 5000 PSI, connect with ISO 7241 series B, 60 Series Couplers. Parker's 60 Series have double shut-off poppet valves and are interchangeable with other quick disonnects and complying with ISO 7241 series B. These general purpose quick couplings are available in a wide range of sizes and materials to be versatile for use with several fluids, influding high temperature steam. Parker's 60 Series is multi-purpose for a variety of applications and pressures up to 5000 PSI. Technical Characteristics: Sizes: 1/8" - 2-1/2" Materials: Steel, Brass, 303 Stainless Steel, 316 Stainless Steel Port Ends: Female NPTF, Female ORB Seal Options: Nitrile, EPR, Flourocarbon, Neoprene Coupler Options include: Sleeve Lock, Valve Actuater, Steam Compatibility Markets: Industrial Construction Chemical Processing Commercial Cleaning Agriculture Features/Benefits: Globally interchangeable with other manufacturer's couplings complying to ISO 7241 series B Multi-purpose coupling, widely used in varied applications Steel nipples have a hardened body for strength and durability Metal valve stop prevents flow checking to provide steady performance Steam version couplers have Ethylene Propylene seals to withstand high temperatures and the 3/8"" has a grip-ring sleeve for easy operation when wearing gloves. Metal valve stop prevents flow checking to provide steady performance Nipple options include high temperature steam compatibility Applications: Industrial hydraulic lines Food and chemical processing Water and coolant lines High pressure fluid transfer High temperature fluid transfer Mobile equipment Cleaning equipment Dry cleaning Steam and some gases   Technical Specifications: Maximum Working Pressure (PSI) 5000 Maximum Working Pressure (BAR) 340 Flow Rate (GPM) 3 Flow Rate (LPM) 11 Media Hydraulic Industry Standards ISO 7241-1, Series B Coupling Half Nipple Minimum Working Temperature (F) -40 Minimum Working Temperature (C) -40 Maximum Working Temperature (F) 250 Maximum Working Temperature (C) 121 Valve Style Poppet Sleeve Type Manual Sleeve Locking Mechanism Locking Balls Vacuum Rating (INCH of HG) 27.4 Vacuum Rating (BAR) -0.9 Thread Style Female Plating N/A Valve Material 303 Stainless Ball Material Stainless steel

    $38.00

  • Brass 37 Degree Flare x 1/4" FNPT Shop All Categories BVV

    Brass 37 Degree Flare x 1/4" FNPT

    Brass 37° Flare x 1/4" FNPT that allows the user to adapt a 1/4" MNPT fitting to a 1/4" flared fitting.   Note: This connection requires yellow gas PTFE tape to create a leak free connection.

    $1.00

  • SSP - 1/4" FNPT x 3/8" MNPT Reducing Bushing Shop All Categories SSP Corporation

    1/4" FNPT x 3/8" MNPT Reducing Bushing

    SSP Instrumentation TruFit® is manufactured from fully-traceable raw material to close tolerances and superior surface finishes. TruFit® provides optimal performance when installed in accordance with SSP’s recommendations and the design parameters appropriate for each type of connection – tapered thread, straight thread, and weld & braze. TruFit® components are cleaned in accordance with SSP documented work instructions using equipment calibrated to NIST standards with environmentally-safe and stable agents, ultrasonics, and heat/ temperature to remove all residual oil, grease and loose particles. Stainless steel components are passivated to the requirements of MIL QQ-P-35 and ASTM A 967. ***Note: ALL NPT Threads REQUIRE the user to properly install the fitting by using a thread sealant to prevent leaks. Best Value Vacs reccommends GAS PTFE Tape   Specifications Connection Type 1 Female NPT Connection Size 1 1/4" Connection Type 2 Male NPT Connection Size 2 3/8" Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) 7750 NPT Pressure Rating >10,000PSI ASME B31.3   SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

    $11.00

  • SSP - 37° AN Adapter SSP Corporation 3/8-inch X 1/4-inch Flare

    37° AN Adapter

    SSP - 37° AN Adapter SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance, and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations. Specifications Connection Type 1 Tube Stem Connection Size 1 Specified by User Connection Type 2 Male 37° AN Flare Connection Size 2 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

    $14.50 - $32.50

  • Bore Through 1/2" Compression Fitting x 1/2" MJIC Shop All Categories BVV

    Bore Through 1/2" Compression Fitting x 1/2" MJIC

    Bore Through 1/2" Compression Fitting x 1/2" MJIC made out of 304 stainless steel.  

  • SSP 1/2" Compression Fitting Parts Shop All Categories SSP Corporation Nut

    SSP 1/2" Compression Fitting Parts

      SSP 1/2" Compression Fitting Parts   ISSD8N: Duolok Tube Fittings, 1/2 in. Nut ISSD8FF: SSP® Duolok® Front Ferrule, FF Series, Nominal Size: 1/2 in, 316 Stainless Steel ISSD8BF: SSP® Duolok® Back Ferrule, BF Series, Nominal Size: 1/2 in, 1/2 in ID, 316 Stainless Steel

    $3.00 - $7.50

  • Julabo Adapter 8891609 M16x1 f to NPT 1/2″ f Shop All Categories Julabo

    Julabo Adapter 8891609 M16x1 f to NPT 1/2″ f

    Julabo Adapter 8891609 M16x1 f to NPT 1/2″ f 2 Adapters M16x1 f. to NPT 1/2″ f.

    $212.00

  • BVV Quick Disconnect Male and Female 1/2" FNPT New Products BVV

    BVV Quick Disconnect Male and Female 1/2" FNPT

    BVV Quick Disconnect Male and Female 1/2" FNPT Description [Size]: 1/2" Female NPT; Pressure-proof: 1500 PSI; Flow:12 gpm. [Quality Materials]: The Quick Disconnect is made of high quality 304 stainless steel and The sealing material is made of fluorine rubber which is durable, stable, rust and corrosive resistance and good for long time using. [Precise Design]: Steel balls are used to connect the adapter which makes the sealing better, both ends open-closed. [High Working Temp. & Wide Range of Applications]: The Quick Disconnect provides good sealing and easy to unload. It can be used for connecting two pipes in the double seal system. It is suitable for different media including water, gas, and oil with working at -4°F~392°F.

    $100.00

  • 1/4" Cap Shop All Categories SSP Corporation

    1/4" Cap

    SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations.   Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating       SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA! Dimensions A 0.92 in C 0.70 in D 0.60 in G 9/16 in H 1/2 in T 1/4 in B 0.63 in

    $6.00

  • Adapter Kit, For IBC Hose, Includes 3 (2" NPS Female, 2" Camlock, S60x6 Female Buttress), For 26BNZ1 Shop All Categories BVV

    Adapter Kit, For IBC Hose, Includes 3 (2" NPS Female, 2" Camlock, S60x6 Female Buttress), For 26BNZ1

    Adapter Kit, For IBC Hose, Includes 3 (2" NPS Female, 2" Camlock, S60x6 Female Buttress), For 26BNZ1     26BNZ4 3 Piece Adapter Kit for IBC Hose 26BNZ1 (IBC Kit w/ 10" Hose & PP Nozzle w/ 1" Camlock Coupler). Kit includes: 1" Camlock adapter x 2" NPS female Easy-Seal 2" Camlock coupler X 1" Camlock adaptor male 1" Camlock adapter x S60X6 female buttress     Disclaimer:  This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. ShopBVV does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.

    $39.00

  • 2" Female NPT to 2" Male Buttress Adapter Shop All Categories BVV

    2" Female NPT to 2" Male Buttress Adapter

    2" Female NPT to 2" Male Buttress Adapter     This adapter converts 2" male NPT pipe threads to 2" male buttress pipe threads. The adapter incorporates female NPT threads on one end and male buttress threads on the other for connecting pipes and valves with different ends. Made of tough polypropylene (PP), this adapter also incorporates an ethylene propylene diene monomer (EPDM) gasket for a leak-tight connection. Shallow profile ensures valve does not protrude past IBC tote cage. Key benefits: Converts 2" male NPT pipe thread to a 2" male buttress pipe thread 2" long profile does not protrude past IBC cage during transport Made of PP EPDM gasket ensures a secure seal Suitable for use in a wide variety of liquid handling applications Proudly Made in the USA Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products.     Disclaimer:  This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. Material PP Dimensions 2.4" Dia. x 1.02" H Weight 0.1 lbs. Case Pack 200 ea. Case Dimensions 15" L x 11" W x 16" H Case Weight 20 lbs. Pallet Pack 6,000 ea. (30 Cases) Pallet Dimensions 40" L x 48" W x 60" H Pallet Weight 600 lbs. Country of Manufacture United States Gasket EPDM Rubber Gasket

  • SSP - Female Run Tee Shop All Categories SSP Corporation 1/4-inch X 1/4-inch X 1/4-inch FNPT

    Female Run Tee

    SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations.   Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Connection Type 2 Duolok Tube Fitting Connection Size 2 Specified by User Connection Type 3 Female NPT Connection Size 3 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating NPT Pressure Rating >10,000PSI ASME B31.3     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

    $35.00 - $43.00

  • Julabo Adapter M16x1 f to NPT 1/2″ Shop All Categories Julabo

    Julabo Adapter M16x1 f to NPT 1/2″

    Julabo Adapter M16x1 f to NPT 1/2″     2 Adapters M16x1 f. to NPT 1/2″ m.

    $169.00

  • Compression TEE 1/2" Compression x 3/4" Compression x 1/2" FNPT Shop All Categories BVV

    Compression TEE 1/2" Compression x 3/4" Compression x 1/2" FNPT

    Compression TEE 1/2" Compression x 3/4" Compression x 1/2" FNPT made out of 304 stainless steel

    $65.00

  • 10' PVC Hose Kit, PP Nozzle, 1" Female Camlock, for Drums or IBC Totes Shop All Categories BVV

    10' PVC Hose Kit, PP Nozzle, 1" Female Camlock, for Drums or IBC Totes

    10' PVC Hose Kit, PP Nozzle, 1" Female Camlock, for Drums or IBC Totes     The 26BNZ1 is an IBC Kit with a 10' PVC hose and Polypropylene (PP) 1" nozzle with 1" camlock couple that dispenses liquids from drums. The kit needs to be used with the 26BNZ4. The 1" OD nozzle has a Viton O-Ring. The dispensing nozzle is hand operated and both the hose and nozzle are resistant towards chemicals.   Disclaimer:  This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.

    $160.00

  • Part A 2" Stubby Metric Cam Lock Adaptor Shop All Categories BVV

    Part A 2" Stubby Metric Cam Lock Adaptor

    Part A 2" Stubby Metric Cam Lock Adaptor   This adapter converts 2" (50mm) male buttress pipe threads to a 2" male camlock. The adapter incorporates female buttress threads on one end and a male Camlock (also known as a quick-disconnect or QD) on the other for connecting pipes and valves with different ends. Made of tough polypropylene (PP), this adapter also incorporates an ethylene propylene diene monomer (EPDM) gasket for a leak-tight connection. Shallow profile ensures valve does not protrude past IBC tote cage. Key benefits: Converts 2" male buttress pipe thread to a 2" male quick-disconnect 2" long profile does not protrude past IBC cage during transport Combo camlock/NPT end allows use of a shallow NPT cap Made of PP EPDM gasket ensures a secure seal Suitable for use in a wide variety of liquid handling applications Proudly Made in the USA   Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products.   Disclaimer:  This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.     Material PP Dimensions 2.4" Dia. x 1.02" H Weight 0.1 lbs. Case Pack 200 ea. Case Dimensions 15" L x 15" W x 16" H Case Weight 20 lbs. Pallet Pack 4,800 ea. (24 Cases) Pallet Dimensions 40" L x 48" W x 60" H Pallet Weight 480 lbs. Country of Manufacture United States Gasket EPDM Rubber Gasket

    $16.00

  • 2" Stubby Buttress to NPT Adaptor Shop All Categories BVV

    2" Stubby Buttress to NPT Adaptor

     2" Stubby Buttress to NPT Adaptor This adapter converts 2" (50mm) male buttress pipe threads to 2" male NPT pipe threads. The adapter incorporates female buttress threads on one end and male NPT threads on the other for connecting pipes and valves with different ends. Made of tough polypropylene (PP), this adapter also incorporates an ethylene propylene diene monomer (EPDM) gasket for a leak-tight connection. Shallow profile ensures valve does not protrude past IBC tote cage. Key benefits: Converts 2" male buttress pipe thread to a 2" male NPT pipe thread 2" long profile does not protrude past IBC cage during transport Made of PP EPDM gasket ensures a secure seal Suitable for use in a wide variety of liquid handling applications Proudly Made in the USA   Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products.   Disclaimer:  This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.     Material PP Dimensions 2.4" Dia. x 1.02" H Weight 0.135 lbs. Case Pack 200 ea. Case Dimensions 15" L x 15" W x 16" H Case Weight 27 lbs. Pallet Pack 4,800 ea. (24 Cases) Pallet Dimensions 40" L x 48" W x 60" H Pallet Weight 648 lbs. Country of Manufacture United States Gasket EPDM Rubber Gasket Note: Color may vary.

    $18.00

  • BVV M24 - 1/2" MNPT Huber Adapter Shop All Categories BVV Kit

    BVV M24 - 1/2" MNPT Huber Adapter

    BVV M24 - 1/2" MNPT Huber Adapter This zinc plated adapter is meant to be used on Huber Unistats with male M24 threads to adapt to 1/2" MNPT. These fittings must be used in conjunction with M24 Bonded seal washers to create a complete seal.     Bonded Seal Specifications For Thread Type Metric For Gender Male For Thread Size M24 Washer Material Steel Gasket Material Buna-N Rubber Temperature Range -20° to 230° F Thickness 2mm RoHS RoHS 3 (2015/863/EU) compliant with exemption 6(a)-I - Lead as an alloying element in steel

    $285.00

  • SSP - Union Elbow - 3/8" Duolok Unclassified 0 3/8"

    SSP - Union Elbow - 3/8" Duolok

    SSP - Union Elbow - 3/8" Duolok

  • Reducing Union Tee 3/8" x 3/8" x 1/4" Shop All Categories SSP Corporation

    Reducing Union Tee 3/8" x 3/8" x 1/4"

    SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations   Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 3/8" Tube Connection Type 2 Duolok Tube Fitting Connection Size 2 1/4" Tube Connection Type 3 Duolok Tube Fitting Connection Size 3 3/8" Tube Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

    $42.00

  • Part A 2" Stubby NPT to Cam Lock Adaptor Shop All Categories BVV

    Part A 2" Stubby NPT to Cam Lock Adaptor

    Part A 2" Stubby NPT to Cam Lock Adaptor     This adapter converts 2" (50mm) male NPT pipe threads to a 2" male camlock. The adapter incorporates female NPT threads on one end and male camlock (also known as a quick disconnect or QD) on the other for connecting pipes and valves with different ends. Made of tough polypropylene (PP), this adapter also incorporates an ethylene propylene diene monomer (EPDM) gasket for a leak-tight connection. Shallow profile ensures valve does not protrude past IBC tote cage. Key benefits: Converts 2" male NPT pipe thread to a 2" male camlock 2" long profile does not protrude past IBC cage during transport Made of PP EPDM gasket ensures a secure seal Suitable for use in a wide variety of liquid handling applications Proudly Made in the USA     Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products.       Disclaimer:  This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.   Material PP Dimensions 2.4" Dia. x 1.02" H Weight 0.1 lbs. Case Pack 200 ea. Case Dimensions 15" L x 15" W x 16" H Case Weight 20 lbs. Pallet Pack 6,000 ea. (30 Cases) Pallet Dimensions 40" L x 48" W x 60" H Pallet Weight 600 lbs. Country of Manufacture United States Gasket EPDM Rubber Gasket

    $16.00

  • Adapters M24x1.5 female to NPT 1/2" male Shop All Categories Julabo

    Adapters M24x1.5 female to NPT 1/2" male

    Adapters M24x1.5 female to NPT 1/2" male   2 Adapters M24x1.5 female to NPT 1/2″ male

    $301.00

  • Adapter 8890069 M24x1.5 m to M30x1.5 f Shop All Categories Julabo

    Adapter 8890069 M24x1.5 m to M30x1.5 f

    Adapter 8890069 M24x1.5 m to M30x1.5 f   2 Adapters M24x1.5 male to M30x1.5 female

    $440.00

  • Adapter M30x1.5 male to male Shop All Categories BVV

    Adapter M30x1.5 male to male

    Adapter M30x1.5 male to male   Adapter M30x1.5 male to male

    $190.00

  • adapter M16x1f-1/2"m Unclassified BVV

    Huber adapter M16x1f-1/2"m

    Huber adapter M16x1f-1/2"m Adapter M16x1 f - R1/2 m Adapter M16x1 f - R1/2 m M16x1 female thread to R1/2 male thread

    $127.00

Login

Forgot your password?

Don't have an account yet?
Create account