EZ-Clone

  The EZ-Clone® Low Pro 64 Black has been made from fully recyclable HDPE which highly chemically resistant and extremely durable. Now has leak resistant cord outlet that allows multiple cords. Also a specially designed recessed drain that allows it to be highly protected and gives the ability to easily tip the unit for draining. Improved to make cloning even easier Designed recessed drain that allows it to be highly protected Easily tip the unit for draining Highly chemically resistant and extremely durable

Read more less

  EZ-Clone® is proud to announce the introduction of the brand new 16 Site Low Pro System now in white. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of EZ-Clone's larger systems.

Read more less

  EZ-Clone® is proud to announce the introduction of the brand new 32 Site Low Pro System now in white. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of EZ-Clone's larger systems.

Read more less

  The new EZ-CLONE® Low Pro 64 White has been made from fully recyclable HDPE which is highly chemical-resistant and extremely durable. It now has a leak-resistant cord outlet that allows multiple cords. It also has a specially designed recessed drain that allows it to be highly protected and gives the ability to easily tip the unit for draining

Read more less

  EZ-CLONE has once again reinvented itself and is proud to announce the introduction of its newest creation, the LOW PRO 128 CLONING SYSTEM. Now available in white, it is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design, and improved interface when opening the system to view cuttings. The water pump has an extended baseplate and additional suction cups to prevent any possible tipping. It also includes four different Colored Cloning Collars, and a sample set of new EZ-COCO Cloning Collars.

Read more less

  EZ-Clone 128 Low Pro System every aspect of this Aeroponic Cloning System has been carefully thought out and designed with the utmost passion, to produce the most effective and user friendly cloning system ever seen. Now available in white, it is manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design, and improved interface when opening the system to view cuttings. The Water pump has an extended baseplate and additional suction cups to prevent any possible tipping. It also includes four different Colored Cloning Collars, and a sample set of new EZ-COCO Cloning Collars. Designed recessed drain that allows it to be highly protected Easily tip the unit for draining Highly chemically resistant and extremely durable

Read more less

  EZ-CLONE is proud to introduce the brand new 16 and 32 Site Low Pro Systems. It is manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller Systems utilize the same great Aeroponic Misting Technology as all of our larger systems Designed recessed drain that allows it to be highly protected Easily tip the unit for draining Highly chemically resistant and extremely durable

Read more less

  EZ-CLONE is proud to introduce the brand new 16 and 32 Site Low Pro Systems.  It is manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller Systems utilize the same great Aeroponic Misting Technology as all of our larger systems. Designed recessed drain that allows it to be highly protected Easily tip the unit for draining Highly chemically resistant and extremely durable

Read more less

Perfectly paired with the 9-site and 16-site EZ-CLONE Cloning Systems to ensure the manifolds are receiving the proper flow of water, this 320 GPH pump is extremely energy-efficient. With its plastic-coated impeller and no motor seal to leak or wear out, this pump does not create excessive heat and has a greater life expectancy. Includes an extended base plate to prevent any possible tipping. EZ-CLONE Water Pumps come standard with an adjustable filter to prevent large debris from clogging your misters. These powerful pumps can be used in your EZ-CLONE and many other hydroponic applications.

Read more less

Replacement pump for the EZ Clone 128-site cloning system. Pumps at the rate of 1100 GPH. NOTE: After extensive testing by EZ Clone, it has been determined that the Mag 750 pump (EZWP750) can be used as a replacement for the 32-site, 64-site, and 128-site EZ Clone systems.

Read more less

EZ-CLONE Clear Rez™ is a pH-balanced, non-invasive water treatment designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance. It is designed to be used through out your entire cloning cycle as a possible preventive measure for a multitude of problems in your reservoir. It is suitable for all hydroponic, aeroponic and soil applications. EZ-CLONE Clear Rez is currently available in 2 oz, 4 oz, 8 oz, 16 oz, 32 oz and one gallon container sizes to fit any grower's needs.   Designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance pH-balanced and non-invasive Suitable for all hydroponic, aeroponic and soil applications

Read more less

The new and improved EZ-CLONE Classic Manifold is better than ever. With individually sized manifolds for each system size of the EZ-CLONE Classic Line. Optimal spray coverage is achieved with precise mister placement. Made from highly durable PVC plastic, these manifolds are ultrasonically welded during the manufacturing process to create the strongest bond possible which protects against splitting. Pair these with our EZ-CLONE 360-degree misters for an unrivaled combination. Proprietary design. Molded, durable ABS plastic Creates a thorough and even aeroponic mist Specially designed for each size system   (spray nozzles shown in photo are not included)   Molded, durable ABS plastic Creates a thorough and even aeroponic mist Specially designed for each size system

Read more less

EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years.   EZ-CLONE Cloning Collars are available in 17, 35, and 65 packs.  Designed specifically to be used in the EZ-CLONE Cloning System Manufactured from a sterile material Available in a new high density Hard material as well as the same great Soft material

Read more less

EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years. Designed specifically to be used in the EZ-CLONE Cloning System Manufactured from a sterile material Available in a new high density Hard material as well as the same great Soft material

Read more less

EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years.   Designed specifically to be used in the EZ-CLONE Cloning System Manufactured from a sterile material Available in a new high density Hard material as well as the same great Soft material

Read more less

Replacement spray head for EZ-Clone systems.

Read more less

 Replacement pump for the EZ Clone 32-site system. Pumps at the rate of 700 gallons/hour. NOTE: After extensive testing by EZ Clone, it has been determined that this pump can be used as a replacement for the 32-site, 64-site, and 128-site EZ Clone systems.

Read more less