EXCLUSION LIST Part 1
LightRail 3.5 10 RPM IntelliDrive Motor w/0-60 Second Time Delay
LightRail 3.5 IntelliDrive 10 RPM motor travels approximately 4 feet per minute and has a 0-60 second adjustable time delay for pausing the lamp at the ends of its travel. This helps to promote even growth from end to end and allows for equal light-time for the entire run. It comes complete with installation hardware, instructions and a 2-year manufacturer’s warranty. Note: No rail is included. Great for customers who already have a rail or prefer the one-piece 2 meter rail. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs Quiet and smooth operation Adjustable time delay from 0-60 seconds Helps to promote even growth
$341.99$245.99
Grodan Classic 30/75 Slab (wet), 12" x 3", case of 8
Grodan Stonewool (rockwool) is made from molten rock spun into cotton candy-like fibers and then compressed into cubes, blocks, or slabs. Where other rockwool brand manufacturers cut all sizes from one batch of wool, Grodan is unique by making different types of fibers. The purpose is to support the requirement of the plant in the different plant stages. Grodan has a tremendous capacity for absorbing nutrient solution while retaining plenty of oxygen for rapid plant growth. Grodan comes in graduated sizes. Seedlings started in cubes are easily transferred to blocks and then onto slabs, if desired. Seedlings or cuttings started in the Grodan cubes can also be transplanted into more traditional planters and growing mediums. Grodan Slabs - The final stage of planting with growing blocks are the Grodan slabs. These slabs come in clearly marked UV resistant poly sleeves for ease of use. Recommended for larger, long term crops with extensive roots like peppers, tomatoes, or cucumbers. Typically, seedlings in blocks are placed onto slabs. Grodan Expert is the slab that drains the fastest because of its vertical fibers. By far the most popular slab for the hydroponic hobbyist market. Grodan Master is a special wet/dry slab. The top layer is thicker, which stays wetter, while the bottom layer stays drier. In effect it defies gravity, allowing more even distribution of moisture throughout the slab.
$164.85$115.09
Grodan Dutch Leach Tray Elbow, bag of 25
For the Dutch Leach tray.
$39.66$31.21
FloraFlex Open Flow Bubbler
OPEN/MULTI FLOW BUBBLER: An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. Available with or without Flow Inserts. The Open Flow Bubbler has no pressure regulation. Open Flow - Completely gutted inside to allow maximum pressure while still evenly distributing water 1/2” inlet which seamlessly screws into our Quick Disconnect without threading 8 barbed ports that connect to 1/4” OD Tubing Rubber grip on top for easy use ABS QUICK DISCONNECT PIPE SYSTEM: an eight outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex™ manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (elbow 3/4”) Flora Valve Quick Disconnect Multi Flow Bubbler
$15.22$14.51
FloraFlex GHT to NPT Quick Disconnect Set
Quick Disconnect (GHP TO NPT): This tool easily connects your Flora Valve to your FloraFlex™ Bubbler. Eliminates the need for using Teflon Tape during manifold assembly. Allows you to effortlessly disconnect the bubbler for cleaning purposes. 3/4” Garden hose connection on one side and standard 1/2” thread that connects to Flora Flex Bubblers on the other. No threading required Leak free design Rubber grip for easy use ABS
$4.99$4.83
FloraFlex FloraCap
The FloraFlexTM FloraCapTM is a revolutionary tool for top feeding that also helps eliminate algae. If cared for properly you can get multiple uses out of this tool. Place the Single Use FloraCapTM on top of your 6 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with built in holes for tubing. Each cap features strategically designed slots that deliver water and nutrients to the medium and blocks light while allowing air, water and nutrients to your plant. The FloraCapTM covers the top of the media allowing the root zones to dry at a more consistent rate and delivering the necessary oxygen your plants need to thrive. Algae disappears, healthy roots fill the medium, and blossoms multiply. The FloraCapTM was designed with the vegetative state in mind but has proven a worthy tool for the avid top feeder throughout the flowering stage as well. Features Compatible with all 6 inch rockwool cubes Automate your feed by inserting Tubing (1/4 inch OD) into center holes. Strategically designed slots on both top and bottom folding parts. Carefully clean for reuse Recyclable Stackable BPA and lead-free plastic Benefits Eliminate Algae Save up to 60% of your water, nutrients, and time! Automated Hand Feed Directs all water and nutrients to your plant No more tedious counts, simply fill cap Flexible design. Easily take tool on and off plant Block light. Roots use entire medium Allows medium to dry evenly Compatible with all 6 inch rockwool cubes Strategically designed slots on both top and bottom folding parts. BPA and lead-free plastic Stackable Recyclable
$3.86
EZ-Clone - Low Pro 64 Site Cutting System, White
The new EZ-CLONE® Low Pro 64 White has been made from fully recyclable HDPE which is highly chemical-resistant and extremely durable. It now has a leak-resistant cord outlet that allows multiple cords. It also has a specially designed recessed drain that allows it to be highly protected and gives the ability to easily tip the unit for draining
$383.49$309.67
EZ-Clone - Low Pro 16 Site Cutting System, White
EZ-Clone® is proud to announce the introduction of the brand new 16 Site Low Pro System now in white. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of EZ-Clone's larger systems.
$179.49$144.94
EZ-Clone - Low Pro 128 Site Cutting System, White
EZ-CLONE has once again reinvented itself and is proud to announce the introduction of its newest creation, the LOW PRO 128 CLONING SYSTEM. Now available in white, it is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design, and improved interface when opening the system to view cuttings. The water pump has an extended baseplate and additional suction cups to prevent any possible tipping. It also includes four different Colored Cloning Collars, and a sample set of new EZ-COCO Cloning Collars.
$495.99$400.51
Dyna-Gro Pure Neem Oil
Treat your plants with care that comes directly from another leafy source. Dyna-Gro's Pure Neem Oil is cold-pressed from the seeds of the Neem tree. This organic leaf polish can be used on any plant to produce clean, shiny leaves. Pure Neem Oil leaves a natural shine on leaves without clogging the stomata. Cold-pressed from the seeds of the Neem tree Can be used on any plant to produce clean, shiny leaves Leaves a natural shine on leaves without clogging the stomata
$18.15
Biobizz Light-Mix, 50 L
LIGHT-MIX Substrates Light-Mix is the ideal substrate for organic farmers who wish to have control in the growth of their plants through the application of liquid fertilizers (from the very beginning). For any kind of plant, including heavy feeders, larger quantities of fertilizers may be given on demand without the fear of overloading the soil and causing a nutrient burn.
$23.99$22.19
BioBizz Bio-Heaven
Bio-Heaven is a specially-formulated and highly-concentrated plant energy booster which contains carefully-selected biological stimulants such as amino acids. It improves yield and quality of the harvest by improving moisture retention as well as reducing moisture stress. Bio-Heaven also stimulates plants' enzymatic systems to increase plant respiration, and to rapidly and completely take up key nutrients. Specially formulated concentrated plant energy booster Carefully selected biological plant stimulants such as amino-acids Improves the yield and quality of plant harvest by improving moisture retention
$111.99$86.79
SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Magnetic Hotplate, ceramic-glass plate, 110V, 50/60Hz US Plug
SCILOGEX SCI500H-Pro LCD Digital 10x10 Hotplate, 500°C Max SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Hotplate Features LCD screen shows temperature, Max. temperature up to 500°C 10-inch glass ceramic work plate provides excellent chemical-resistant performance and most efficient heat transfer External temperature control is possible by connecting the temperature sensor (PT 1000) with an accuracy at ±0.2°C The "Hot" warning will flash if the work plate temperature is above 50°C even when the hotplate is turned off Heating temperature: room temperature ~500°C The included SD Card can record the instrument's running data in real time. Timing function: the heat time can be easily set. SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Hotplate Specifications Work plate Dimension[WxD] 254x254mm(10 x 10inch) Work plate material Glass ceramic Heating Position 1 Heating temperature range Room temp. to 500°C, increments 1°C Temperature control accuracy ±1°C(<100°C)±1%(>100°C) Safety temperature 540°C Temperature,Time display LCD Timer function 1min to 99h59min Temperature display accuracy ±0.1°C External temperature sensor PT1000 (±0.2°C) "Hot" warning 50°C Protection class IP21 Power class 1400W Heating output 1350W Voltage Frequency 100-120/200-240V 50/60Hz Dimension[WxDxH] 328x424x138mm Weight 7.18kg Permissible Ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI500H-Pro Manual Scilogex Hotplate & Stirrers Accessories
$750.00
SCILOGEX SCI550-H LED Digital 7 x 7 Square Hotplate, ceramic-glass plate, 110V, 50//60Hz, US Plug
SCILOGEX SCI550-H LED Digital 7x7 Hotplate, 550ºC Max Product Description The SCI550-H is one of the most technically advanced hotplates in the marketplace. Simply turn the heat button to set the desired temperature with the LED display and the actual real-time temperature is clearly displayed. Product Features Easy-to-read LED display Ceramic-Glass plate Hot warning above 50°C Accessories available including PT1000 external sensor and reaction blocks cTUVus approved for UL and CSA 2 YEAR WARRANTY Product Specifications Hotplate MODEL SCI550-H Temp range Ambient - 550°C Temp accuracy at plate ±10°C Temp control accuracy with PT- 1000 Sensor ±1°C Temp increments 5°C Heat output 1000W Heating rate (1 liter water) 6K/min Heat display LED Plate size 7 x 7 in. Plate material Ceramic-Glass Dimensions 14"L x 8.5"W x 4.5"H Weight 11lbs Voltage 110Volts 60Hz Additional Resources and Information Downloadable PDFs Scilogex SCI550-H Manual Scilogex Hotplates & Stirrers Brochure Scilogex Hotplate & Stirrers Accessories
$472.00
SCILOGEX SCI380H-Pro LCD Digital 5.5 x 5.5 in. Hotplate, ceramic plate, 110V, 50/60Hz US Plug
SCILOGEX SCI380H-Pro 5.5 x 5.5 in. LCD Digital Hotplate, 380ºC/1500rpm Max Product Description The new SCI380H-Pro Digital Hotplate is a very economically priced and ideal for accurate heating applications from ambient +5°C to 380°C. Product Features Easy to read backlit LCD display Ceramic plate for chemical resistance and easy clean Electronic speed control for constant speed even during changes in load Brushless DC motor cTUVus approved for UL and CSA 2 Year Warranty Product Specifications Temp range Ambient +5 - 380°C Overheat protection 420°C Temp accuracy at plate ±1(100°C) Temp control accuracy of liquid using PT- 1000 Sensor ±1°C Temp increments 1°C Heat output 500W Power 510W Heating rate (1 liter water) 6K/min Speed display LCD (backlit) Protection class IP21 Plate size 5.5 x 5.5 in. Plate material Ceramic coated aluminum Dimensions 12.5"L x 7"W x 4.2"H Weight 5lbs Voltage 110Volts 60Hz, 510W Additional Resources and Information Downloadable PDFs SCILOGEX SCI380HHotplate Manual SCILOGEX MagneticHotplate-Stirrers Brochure SCILOGEX HotplateStirrers & Accessories
$281.00
SCILOGEX SCI280-Pro, Circular LED Digital Hotplate-Stirrer, ceramic plate, 110V, 50/60Hz, US Plug
SCILOGEX SCI280-Pro Circular-top LED Digital Hotplate Stirrer 280ºC/1500rpm Max Product Description The SCI280 hotplate-stirrer is a very economically priced LED digital hotplate-stirrer ideal for handling small volume task on daily application, as a low temperature magnetic stirrer with max. temperature at 280°C. This compact unit can be used as a hotplate, stirrer or combination. Product Features Heat only, stir only or heat and stir together functions Digital temperature control with max. temperature up to 280°C Digital speed control with max. speed up to 1500rpm, with new brushless motor Stainless steel work plate with ceramic coating provides good chemical resistant performance and easy cleaning LED display shows temperature and speed External temperature control is possible by connecting the temperature sensor(PT1000) with an accuracy at ±0.5°C The “HOT” warning will flash when the work plate temperature is above 50°C even if the hotplate is turned off Accessory reaction blocks for flasks and vessels available Electronic speed control for constant speed even during changes in load Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar cTUVus approved for UL and CSA 2 Year Warranty Product Specifications Work plate dimension[W x D] φ135mm(5 inch) Work plate material stainless steel cover with ceramic Motor type Brushless DC motor Motor input power 5W Motor output power 3W Power 515W Heating output 500W Voltage 100-120V 60Hz Stirring positions 1 Max. stirring quantity 3L Max. magnetic bar[length] 50mm Speed range 200-1500rpm Speed display LED Temperature display LED Speed display resolution ±1rpm Heating temperature range Room Temp.-280°C, increment 1°C Temperature control accuracy ±1°C(100°C) Overheating protection 320°C Temperature display accuracy ±1°C External temperature sensor PT1000 (accuracy ±0.5°C) "Hot" warning 50°C Protection class IP21 Dimension[WxDxH] 150×260×80mm Weight 1.8kg Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI280-Pro Manual Hotplates & Stirrers Brochure Hotplate & Stirrers Accessories
$250.00 - $312.00
SCILOGEX SCI500HS-Pro LCD Digital 10 x 10 Magnetic Hotplate Stirrer, ceramic-glass plate, 110V, 50/60Hz US Plug
SCILOGEX SCI500HS-Pro LCD Digital 10x10 Magnetic Hotplate Stirrer 500°C/1500rpm Max Product Features Large volume: Up to 30L of liquid on 10-inch hot plate with powerful magnetic stirring Glass ceramic work plate provides excellent chemical resistant performance and efficient heat transfer. LCD display for precise monitoring of speed and temperature. Liquid temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C. Digital speed control of 100~1500 rpm Max. heating plate temperature 500°C The "Hot" warning will flash when the work plate temperature is above 50°C even when the hotplate is turned off. Free SD card records the instrument's running data in real time. Timing function: the run time of the instrument can be set. Product Specifications Work plate dimension[W x D] 254x254mm(10inch) Work plate material Glass ceramic Motor type Brushless DC motor Stirring positions 1 Max. Stirring quantity, [H2O] 30L Max. Magnetic bar[length] 80mm Speed range 100-1500rpm resolution±1rpm Speed, Time, Temperature display LCD Timer display 1min-99h59min Heating Temperature range Room Temp. -500°C, increment 1°C Temperature control accuracy ±1°C(100°C) Overheating Protection(°C) 540 Temperature Display Accuracy ±0.1°C External temperature sensor PT1000 (accuracy ±0.2) "Hot" warning (°C) 50 Data Connector SD Card Protection Class IP21 Power 1400W Heating output (W) 1350W Voltage, Frequency 100-120/200-240V 50/60Hz Dimensions [WxDxH] 328x424x138mm Weight (kg) 7.18 Permissible Ambient Temperature and Humidity 5-40° C, 80%RH Additional Resources and Information Downloadable PDFs SCI500HS-Pro Manual Hotplate & Stirrers Accessories
$838.00 - $1,057.00
SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, 110V, 50/60Hz US Plug
SCILOGEX SCI550-Pro 7x7 LCD Digital Hotplate Stirrer 550ºC/1500rpm Max Product Description The SCI550-Pro is one of the most technically advanced hotplate-stirrers in the marketplace. With independent back-lit LCD displays for both heat and stirring functions and PID technology. The SCI550-Pro controls temperature at +/- 1ºC. It also incorporates a DC brushless (spark free) motor for extremely long life and excellent performance. It is widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals etc. Combining with glass ceramic work plate, brushless DC motor and external temperature sensor, the work plate temperature is optimized up to 550°C. Product Features Easy-to-read independent back-lit LCD displays for heat and stirring. Digital speed controlling, max. speed at 1500rpm Built-in PID controller ensures safe heating of the medium with overheating protection. Heat only, stir only or heat and stir together functions. Max. heating plate temperature 550°C Glass ceramic work plate provides excellent chemical resistant performance and most efficient heat transfer. RS232 for remote control, providing PC control and data transmission. Low temperature stability External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C. Accessory PT-1000 stand available (built in stand mount) Electronic speed control for constant speed even during changes in load Maintenance free DC brushless motor for long life and more stirring power Two rotating knobs enable easy adjustment of speed and temperature. High magnetic adhesion “HOT” warning will flash when the work plate temperature is above 50°C even when the hotplate is turned off. cTUVus approved for UL and CSA 2 YEAR WARRANTY Work plate dimension[W x D] 184x184mm(7 inch) Work plate material Glass ceramic Motor type Brushless DC motor Motor input power 18W Motor output power 10W Power 1050W Heating output 1000W Voltage 110V, 60Hz Stirring positions 1 Max. stirring quantity[H2O] 20L Max. magnetic bar[length] 80mm Speed range 100-1500rpm, resolution ±1rpm Speed display LCD Temperature display LCD Heating temperature range Room Temp.-550°C, increment 1°C Temperature control accuracy ±1°C(<100°C) ±1%(>100°C) Overheating protection 580°C Overheating protection ±0.1°C External temperature sensor PT1000 (accuracy ±0.2) "Hot" warning 50°C Data connector RS232 Protection class IP21 Dimension[WxDxH] 215x360x112mm Weight 5.3kg Permissible ambient temperature and humidity 5-40°C, 80%R Additional Resources and Information Downloadable PDFs SCI550-Pro Manual Hotplates & Stirrers Brochure Hotplates & Stirrers Accessories
$654.00 - $702.00
SCILOGEX SCI-PA LED Digital Circular Magnetic Stirrer, 110-240V, 50/60Hz, US Plug
SCILOGEX SCI-PA Circular-top LED Digital Magnetic Stirrer, 100-1500rpm SCILOGEX SCI-PA LED Digital Magnetic Stirrer, 110V 60Hz Product Features Easy-to-read LED displayDigital speed control within the range of 100-1500rpm Max. stirring quantity of H2O at 3LNylon+GF housing provides a great chemical resistance Electronic speed control for constant speed even during changes in loadNow with a brushless long life DC motorHigh magnetic adhesioncTUVus approved for UL and CSA2 YEAR WARRANTYThe SCI-PA Magnetic Stirrer is an economy LED digital stirrer for basic stirring applications. It is not recommend for any corrosive liquid mixing as the plate is made of ABS plastic.Product Specifications Work plate dimensions (WXD) 135(5 inch)mm Work plate material ABS Motor type DC Motor Motor input power 5W Motor output power 3W Power 15W Voltage 100-120, 60Hz Stirring positions 1 Max. stirring quantity[H2O] 3L Max. magnetic bar[length] 50mm Speed range 100-1500rpm Speed display LED Protection class IP42 Dimension[WxDxH] 150×260×80mm Weight 1.8kg Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDF SCI-PA Manual Hotplate & Stirrers Brochure
$156.00
SCILOGEX SCI7-S Analog 7?? Square Plate Magnetic Stirrer, ceramic-glass plate 110V/60Hz, US Plug
SCILOGEX SCI7-S 7x7 Analog Magnetic Stirrer, 15-1500rpm SCILOGEX SCI7-S Analog Stirrer, with Ceramic-Glass plate, 110V 60Hz, US plug Product Features Ceramic-glass work plate provides excellent chemical resistance Speed range of 15-1500rpm Max. stirring quantity of H2O - 10L Electronic speed control for constant speed even during changes in load Maintenance free shaded pole motor for long life High magnetic adhesion cTUVus approved for UL and CSA 2 YEAR WARRANTY Product Specifications Work plate dimensions (WXD) 184x184mm(7 inch) Work plate material Glass ceramic Motor type Shaded pole motor Motor input power 15W Motor output power 1.5W Power 30W Voltage 100-120/200-240V,50/60Hz Stirring positions 1 Max. stirring quantity[H2O] 10L Max. magnetic bar[length] 80mm Speed range 100-1500rpm Speed display Scale Protection class IP21 Dimension[WxDxH] 215x360x112mm Weight 3.8kg Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI7-S Manual SCILOGEX Hotplates &Stirrers Brochure
$353.00
SCILOGEX SCI-PB Analog Circular Stirrer, 110-240V, 50/60Hz, US Plug
SCILOGEX SCI-PB Circular-top Analog Magnetic Stirrer, 15-1500rpm SCILOGEX SCI-PB Analog Circular Stirrer, 110-220V, 50/60Hz, US plug Product Features Electronic speed control for constant speed even during changes in load A wide range of 15-1500rpm Max. stirring quantity of H2O at 3L High magnetic adhesion Now with brushless long life DC motor cTUVus approved for UL and CSA Nylon+GF housing provides a good performance of chemical resistance 2 YEAR WARRANTY The SCI-PB Magnetic Stirrer is an economy stirrer for basic stirring applications. It is not recommended for any corrosive liquid mixing as the plate is made of ABS plastic. Product Specifications Work plate dimension[WXD] Φ135mm(5 inch) Work plate material ABS Motor type DC motor Motor input power 5W Motor output power 3W Power 10W Voltage 100-120V, 60Hz Stirring positions 1 Max. stirring quantity[H2O] 3L Max. magnetic bar[length] 50mm Speed range 0-1500rpm Speed display Scale Protection class IP42 Dimension[WxDxH] 150×260×80mm Weight 1.8kg Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI-PB Manual Hotplates & Stirrers Brochure
$128.00
SCILOGEX SCI-S Circular Analog Magnetic Stirrer, ceramic plate, 110V, 50/60Hz, US Plug
SCILOGEX SCI-S Circular-top Analog Magnetic Stirrer, 15-1500rpm SCILOGEX SCI-S Circular Analog Magnetic Stirrer, ceramic plate, 110V, 50/60Hz, US plug Product Features Electronic speed control for constant speed even during changes in load Speed range of 0-1500 rpm Max. stirring quantity of H2O at 20L Ceramic coated steel plate for anti-corrosion and excellent thermal conductivity Stainless steel work plate cover with ceramic material provides good chemical resistance performance High magnetic adhesion Long life and maintenance free brushless DC motor cTUVus approved for UL and CSA 2 YEAR WARRANTY Product Specifications Work plate dimension[WXD] Φ135mm(5 inch) Work plate material Stainless steel cover with ceramic Motor type Brushless DC motor Motor input power 18W Motor output power 10W Power 30W Voltage 100-120V, 60Hz Stirring positions 1 Max. stirring quantity[H2O] 20L Max. magnetic bar[length] 80mm Speed range 0-1500rpm Speed display Scale Protection class IP42 Dimension[WxDxH] 160×280×85mm Weight 2.8kg Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI-S Manual Hotplates & Stirrers Brochure SCILOGEX SCI-S Magnetic Stirrer.mp4 from SCILOGEX on Vimeo.
$296.00
SCILOGEX SCI-Spin Stirrer, 100-240V, 50/60Hz, US Plug
SCILOGEX SCI-Spin Stirrer, 15-1500rpm SCILOGEX SCI-Spin Stirrer, 100-240V, 50/60Hz, US plug Product Features A wide range of speed from 15-1000rpm Automatic reverse rotation for excellent stirring Protection class (IP65) PET top provides excellent chemical resistance Slip-proof and stable Ultra silence and vibration-free Multi-voltage cTUVus approved for UL and CSA 2 YEAR WARRANTY The Scilogex SCI-Spin Stirrer is an ultra-flat compact stirrer ideal for stirring applications. Its space saving design minimizes bench space and portable due to its light weight. With excellent stirring functionality, the compact shape of FlatSpin takes less bench space and makes storage easier. Product Specifications Work plate dimension Φ90mm Work plate material PET Motor type Motorless Motor output power 3W Power 5W Voltage 100-120/200-240V,50/60Hz Stirring positions 1 Max. stirring quantity[H2O] 0.8L Max. magnetic bar[length] 40mm Speed range 15-1500rpm Speed display button Protection class IP65 Dimension[WxDxH] 175x120x15mm Weight 0.3kg Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI-Spin Stirrer Manual Hotplate-Stirrers Brochure SCILOGEX SCI-Spin Magnetic Stirrer.mp4 from SCILOGEX on Vimeo.
$143.00
SCILOGEX SCI40-S Overhead LED Digital Stirrer, with s/steel cross stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug
SCILOGEX SCI40-S (40L) LED Digital Overhead Stirrer 50-2200rpm SCILOGEX SCI40-S Overhead LED Digital Stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug (including steel cross-stirrer Part# 1890007, stand sold separately) Product Features A wide range of speed from 50 to 2200rpm Brushless DC motor for long life and maintenance free Analog speed controls displayed on the LED display for monitoring actual speed High torque for viscous medium stirring Over torque protection automatically stops the motor Safety circuits allow for safe stop function in anti-stall or overload condition A through-shaft design allows for easy adjustment of the impeller position In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns Pass through stirrer rods accepted cTUVus approved for UL and CSA 2 YEAR WARRANTY Product Specifications Maximum stirring capacity 40L Maximum torque 60Ncm Viscosity maximum 50000mPas Speed range 50-2200rpm Speed display accuracy ± 50rpm Speed display resolution ± 10rpm Chuck diameter range 0.5-10mm Dimensions 3.3W x 8.7H x 7.3D in (83W x.220H x 186D mm) Motor rating input 120W Motor rating output 100W Weight 5.5lbs Motor type brushless DC motor Voltage/Power 100-220V, 50/60 Hz/ 130W Speed/Torque display LED Overload protection display LED lights Protection class IP42 Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI40-S manual SCILOGEX OverheadStirrers brochure SCILOGEX OverheadStirrers Software SCILOGEX SCI20/40-S LED Digital Overhead Stirrer.mp4 from SCILOGEX on Vimeo.
$989.00
SCILOGEX SCI20-S Overhead LED Digital Stirrer, with s/steel cross stirrer, 20L Capacity, 100-220V 50/60Hz, US Plug
SCILOGEX SCI20-S (20L) LED Digital Overhead Stirrer 50-2200rpm SCILOGEX SCI20-S Overhead LED Digital Stirrer, 20L Capacity, 100-220V 50/60Hz, US Plug (including steel cross-stirrer Part# 18900071, stand sold separately) Product Features Buy 1 SCI20-S (20L) LED Digital Overhead Stirrer and get a Steel Cross-Stirrer FREE! A wide range of speed from 50 to 2200rpm Analog speed controls displayed on the LED display Brushless DC motor for long life and maintenance free High torque for viscous medium stirring Safety circuits allow for safe stop function in anti-stall or overload conditions LED screen for monitoring actual speed Over torque protection automatically stops the motor In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns Pass through stirrer rods accepted Keyless chuck Multi voltage 110-220V cTUVus approved for UL and CSA 2 YEAR WARRANTY Product Specifications Maximum stirring capacity 20L Maximum torque 40Ncm Viscosity maximum 10000mPas Speed range 50-2200rpm Speed display accuracy ± 50rpm Speed display resolution ± 10rpm Chuck diameter range 0.5-10mm Dimensions 3.3W x 8.7H x 7.3Dinches Motor rating input 60W Motor rating output 50W Weight 5.5lbs Motor type brushless DC motor Voltage/Power 110-220V, 50/60 Hz/ 70W Speed/Torque display LED Overload protection display LED lights Protection class IP42 Permissible ambient temperature and humidity IP42 Additional Resources and Information Downloadable PDFs SCI20-S Manual Scilogex OverheadStirrers Brochure Scilogex OverheadStirrers Software SCILOGEX SCI20/40-S LED Digital Overhead Stirrer.mp4 from SCILOGEX on Vimeo.
$628.00
SCILOGEX SCI40-Pro Overhead LCD Digital Stirrer, with stand and s/steel cross srirrer, 40L Capacity, 100-220V 50/60Hz, US Plug
SCILOGEX SCI40-Pro (40L) LCD Digital Overhead Stirrer 50-2200rpm SCILOGEX SCI40-Pro Overhead LCD Digital Stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug (including stand Part# 18900131 and steel cross-stirrer Part# 18900071) Product Features Accurate microprocessor stirring speed control guarantees speed precision RS232 provides PC control and data transmission with free software Provides constant speed even with changes in viscosities of the samples Anti-spill microprocessor control slow start up prevents spillage and splashing Safety circuits allow for safe stop function in anti-stall or overload conditions A through-shaft design allows for easy adjustment of the impeller position Brushless DC motor for long life and maintenance free Torque trend display for real-time information on viscosity changes LCD display for precise monitoring of set and actual speeds, a wide range of speed from 50 to 2200rpm with control accuracy of ±3rpm. Set value and actual value can be displayed for real-time monitoring of torque and speed Pass through stirrer rods accepted PC software control via RS232 interface, for control and documenting all measured values via PC. Download software here cTUVus approved for UL and CSA 2 YEAR WARRANTY Product Specifications Maximum stirring capacity 40L Maximum torque 60Ncm Viscosity maximum 50000mPas Speed range 50-2200rpm Speed display accuracy ± 3rpm Speed display resolution ± 1rpm Chuck diameter range 0.5-10mm Dimensions 3.3W x 8.7H x 7.3Dinches Motor rating input 120W Motor rating output 100W Weight 5.5lbs Motor type brushless DC motor Voltage/Power 100-220V, 50/60 Hz/ 70W Speed/Torque display LCD Overload protection display LED lights Protection class IP21 Data connector RS232 Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI40-Pro Manual SCILOGEX OverheadStirrers Brochure SCILOGEX OverheadStirrers Software SCILOGEX SCI20/40-Pro LCD Digital Overhead Stirrer.mp4 from SCILOGEX on Vimeo.
$1,191.00
SCILOGEX SCI20-Pro Overhead LCD Digital Stirrer, with stand and s/steel cross srirrer, 20L Capacity, 100-220V 50/60Hz, US Plug
SCILOGEX SCI20-Pro Overhead LCD Digital Stirrer, with stand and s/steel cross srirrer, 20L Capacity, 100-220V 50/60Hz, US Plug SCILOGEX SCI20-Pro Overhead LCD Digital Stirrer, 20L Capacity, 100-220V 50/60Hz, US Plug. Includes Stand (Part# 18900131) and Steel Cross-stirrer (Part# 18900071) Product Features Accurate microprocessor stirring speed control guarantees speed precision Anti-spill microprocessor control slow start up prevents accidental spillage and splashing RS232 provides PC control and data transmission with free software A through-shaft design allows for easy adjustment of the impeller positions Brushless DC motor for long life and maintenance free Provides constant speed even with changes in viscosities of the samples LCD display for precise monitoring of set and actual speeds, a wide range of speed from 50 to 2200rpm with control accuracy of ±3rpm. Set value and actual value can be displayed for real-time monitoring of torque and speed Over torque protection automatically stops the motor Torque trend display for real-time information on viscosity changes Pass through stirrer rods accepted Keyless chuck PC software control via RS232 interface, for control and documenting all measured values via PC. Download software here cTUVus approved for UL and CSA 2 YEAR WARRANTY SCILOGEX Overhead Stirrers can accomplish the most demanding tasks and provide high safety and increased performance. They are widely used in chemical synthesis, pharmaceutical synthesis, physical and chemical analysis, petrochemical industries, etc. Product Specification Maximum stirring capacity 20 Liters Maximum torque 40Ncm Viscosity maximum 10000mPas Speed range 50-2200rpm Speed display accuracy ± 3rpm Speed display resolution ± 1rpm Chuck diameter range 0.5-10mm Dimensions 3.3W x 8.7H x 7.3D inches (83W x 220H x 186D mm) Motor rating input 60W Motor rating output 50W Weight 5.5lbs Motor type brushless DC motor Voltage/Power 100-220V, 50/60 Hz/ 70W Speed/Torque display LCD Overload protection display LED lights Protection class IP21 Data connector RS232 Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI20-Pro Manual Scilogex OverheadStirrers Brochure Scilogex OverheadStirrers Software SCILOGEX SCI20/40-Pro LCD Digital Overhead Stirrer.mp4 from SCILOGEX on Vimeo.
$1,005.00
SCILOGEX D500 Homogenizer, 100-5000ml capacity
SCILOGEX D500 Homogenizer, 100-5000ml capacity SCILOGEX D500 Homogenizer Package - Drive Motor, DS-500/2 20mm diaGenerator, with S20F/ER20 flat head-open slot fine generator, 215mm immerse length, for water in oil or oil in water emulsions, volumes 10- 5000ml and with H-600 stand 110V, 60Hz CILOGEX D500 Homogenizer Package - Drive Motor, DS-500/1 20mm dia. Generator, with S20C/SR20 flat head-open slot coarse generator, 215mm immerse length, for solid/liquid media, volumes 10-5000ml and with H-600 stand, 110V, 60Hz Scilogex D500 Homogenizer Drive Motor, 110V/60Hz, US Plug Motor only
$1,509.00 - $2,063.00
Scilogex DS-160 Saw-Tooth Generator Probe for D-160
Scilogex DS-160 Saw-Tooth Generator Probe for D-160 DS-160/T5 Dia 5mm x L 50mm saw-tooth generator probe for D-160, for tissue, volumes 0.1-50ml DS-160/T7 Dia 7mm x L 130mm saw-tooth generator probe for D-160, for tissue, volumes 1-50ml DS-160/T10 Dia 10mm x L 115mm saw tooth generator probe for D-160, for tissue, volumes 1-250ml DS-160/T14 Dia 14mm x L 130mm saw tooth generator probe for D-160, for tissue, volumes 100-1000ml
$348.00 - $913.00
Scilogex Homogenizer Stand
Scilogex Homogenizer Stand(Stand ONLY - Homogenizer NOT Included)This is the Scilogex Homogenizer Stand for the Sciligoex model D160 and D500 homogenizers. This stand is made out of aluminum and features adjustable height knobs and clamp for the homogenizer and the applications needs.
$360.00 - $982.00
Scilogex D160 Homogenizer Package
Scilogex D160 Homogenizer Package 0.1-50ml Homogenizer Package DS-160/5 5mm dia. generator - SCILOGEX D160 Homogenizer Package - Drive Motor, DS-160/5 5mm dia. generator, flat head-open slot, 50mm immerse length, H-370 stand, for solid/liquid media, volumes 0.1-50ml, 110V, 60Hz. 1-250ml Homogenizer Package DS-160/10 10mm dia. generator - SCILOGEX D160 Homogenizer Package -Drive Motor, DS-160/10 10mm dia. generator, flat head-open slot, 115mm immerse length, H-370 stand, for solid/liquid media, volumes 1- 250ml, 110V, 60Hz Motor Only SCILOGEX D160 Homogenizer Drive Motor, 110V/60Hz
$206.00 - $969.00
Helix Base Complete Accessory Kit
Helix Base Complete Accessory Kit The perfect complimentary accessory kit to our Helix rosin press or any rosin press with heat plates up to 4" wide. This rosin press accessory kit has everything you need to prep, pack, scrape, and press up to a half lb of flower and up to a pound of sift or hash! Press any material with ease This handy complete Helix rosin press accessory kit comes with multiple 2" x 3" micron bag types and all the tools you need to press flower, dry sift, or ice water hash. Perfect for any press with small plates Don't have a Helix? No problem. Every accessory and tool in this kit works perfect with other rosin presses that have 4" or larger heat plates as well. Kit includes: (120x) 2" x 3" rosin filter bags, 20 each of 5 key micron types (25μm, 36μm, 72μm, 90μm, 115μm, and 160μm) (1x) 2" x 3" 100% aluminum, magnetized pre-press mold (100x) pack of our pre-cut 35 lb 100% USA-made parchment paper (1x) PurePressure silicone extraction dab mat (11.75" x 8.5") (1x) PurePressure specialized rosin collection tool (1x) PurePressure Turbo Funnel (1x) Quick Flip tool (3x) PurePressure Sticker Pack
$310.00
PurePressure Lab Grade Washing Platform
PurePressure Lab Grade Washing Platform PurePressure's metal washing platform is the perfect addition to any ice water flower processing operation. Fully adjustable with either a 3 or 4 step configuration and a sturdy aluminum construction enables you to put your Bruteless flower washer system to even better use. These platforms are OSHA approved, easy to assemble, and most importantly give your team a safe location to wash and drain your ice water flower. Works perfectly with our Bruteless systems This sturdy all-metal platform is the perfect companion to our Bruteless Pro and Bruteless Commercial systems. CAL and OSHA compliant Designed for real lab environments, each platform is CAL and OSHA compliant to keep your inspector happy. Super sturdy and highly adjustable Each platform is easy to assemble, can be configured for 3 or 4 steps depending on ceiling height, and offers full metal construction for long lasting dependability. Ships free to most locations Shipping is included in the purchase price to the lower 48 states. For AK, HI, and international destinations, please contact us for a quote! Technical specifications: Aluminum construction with galvanized steel hand rails, adjustable legs, and guard rails CAL and OSHA compliant Two adjustable dimensions, including overall height of 70" - 77" and stair height of 28" - 35" Platform measures 60" x 43.5" and steps are 12" x 36" Additional Information: Assembly Instructions
$1,999.00
Bruteless Commercial Washing System
Bruteless Commercial Washing System The Bruteless™ Commercial system is the ultimate, high volume laboratory-sized bubble Flower washing kit. With the 65 gallon Bruteless™ as the main wash vessel, you can easily wash up to 15,000 fresh frozen grams per run. It's paired with two 44 gallon Bruteless™ drain vessels, two pumps, two hose kits, and every connection needed to create incredible water management capabilities. This system enables you do two full massive wash cycles per day, each with three washes each, for efficiency and throughput never before thought possible. Note: the stainless steel platform pictured not included. Built for labs that want to make the best The Bruteless Commercial system is the choice of solventless labs across the world who have high demands for their ice water flower washing setups. Capable of washing 15,000 or more fresh frozen grams per batch, or 16 dry lbs or more per day, the Commercial System is designed for labs that need to scale output and increase quality. Food grade materials, built in North America Each Bruteless washing vessel is made with durable, food contact approved, sanitary welded stainless steel. This ensures cleaning is a breeze and enables users to keep their wash environment as clean as possible compared to plastic-based solutions. Bruteless vessels are proudly built in North America. Industry leading features The primary Bruteless washing vessel includes an integrated stainless steel false bottom that protects your trichomes during the wash process, keeping your bags and ice 3" above your flowers. The integrated baffles in the false bottom create a turbulent-free zone at the bottom of the vessel to protect your trichomes. Both vessels come with a thick 1" cryogenic insulation sleeve which helps reduce ice usage by up to 50% and is removable for easy cleaning. Designed for those who wash This system comes with every accessory operators need to produce premium bubble flowers all day, every day. The 65 gallon Bruteless wash vessel comes with 5 strategically placed ports and virtually every wash setup related tool you could need, including hoses, water pumps, a sigh glass, a temperature gauge, and much more. The Commercial system includes all of the following: (1x) 65 gallon Bruteless vessel (2x) 44 gallon Bruteless vessel for draining without false bottoms (6x) 1.5" ball valves (9x) 1.5" 90 degree elbows (3x) 1.5" check valves (2x) wye tri clamps (1x) tee tri clamps (1x) 2" sight glass (1x) Bruteless temperature gauge (1x) 4" straight piece (1x) wash paddle (2x) 44 gallon triangular dollies (2x) Bruteless complete 2 hose kits (2x) Bruteless water pumps with fittings, and all the gaskets and clamps you need for assembly. Additional Information: Pure Pressure 2021/22 Flower Washing Brochure Bruteless Vessel Care Instructions User Manual Download PVC Hoses Declaration of Compliance Download Sanitary Tri Clamp Gasket Declaration of Compliance Download Bruteless Wash Vessels Declaration of Compliance
$14,995.00
Pure Pressure Bruteless Pro Washing System
Pure Pressure Bruteless Pro Washing System The Bruteless Pro system is designed for laboratories and high volume bubble Flower washing operations to produce high volumes of ice water Flower. With the 44 gallon Bruteless™ as the main wash vessel, you can easily wash up to 10,000 fresh frozen grams per run. Combined here with the PurePressure water pump and hose kits, you can attain levels of throughput and efficiency never before possible. Note: the stainless steel platform pictured not included. Built for growing solventless labs and operations The Bruteless Pro system is popular with solventless labs that prefer hand washing and need a scalable food grade, modern ice water water production solution. This system is capable of washing 10,000 fresh frozen grams per batch, or over 11 dry lbs per day. Food grade materials, built in North America Each Bruteless washing vessel is made with durable, food contact approved, sanitary welded stainless steel. This ensures cleaning is a breeze and enables users to keep their wash environment as clean as possible compared to plastic-based solutions. Bruteless vessels are proudly built in North America. Industry leading features The primary Bruteless washing vessel includes an integrated stainless steel false bottom that protects your trichomes during the wash process, keeping your bags and ice 3" above your flowers. The integrated baffles in the false bottom create a turbulent-free zone at the bottom of the vessel to protect your trichomes. Both vessels come with a thick 1" cryogenic insulation sleeve which helps reduce ice usage by up to 50% and is removable for easy cleaning. Ready for action, right off the pallet This system comes loaded with accessories right out of the box so you can increase your production capacity same-day. The 44 gallon Bruteless wash vessel comes with 5 strategically placed ports and virtually every wash setup related tool you could need, including hoses, water pumps, a sigh glass, a temperature gauge, and much more. The Pro system includes all of the following: (1x) 44 gallon Bruteless vessel (2x) 30 gallon Bruteless vessel for draining without false bottoms (6x) 1.5" ball valves (9x) 1.5" 90 degree elbows (3x) 1.5" check valves (2x) wye tri clamps (1x) tee tri clamps (1x) 2" sight glass (1x) Bruteless temperature gauge (1x) 4" straight piece (1x) wash paddle (2x) 30 gallon triangular dollies (2x) Bruteless complete 2 hose kits (2x) Bruteless water pumps with fittings, and all the gaskets and clamps you need for assembly Additional Information: PurePressure 2021/22 Flower Washing Brochure Bruteless Vessel Care Instructions User Manual Download PVC Hoses Declaration of Compliance Download Sanitary Tri Clamp Gasket Declaration of Compliance Download Bruteless Wash Vessels Declaration of Compliance
$11,995.00
Helix Pro Complete Accessory Kit
Helix Pro Complete Accessory Kit The perfect complimentary accessory kit to our Helix Pro rosin press or any rosin press with heat plates up to 6" wide. This kit contains everything you need to pack, press, and collect almost a pound of flower or nearly two pounds of dry sift or ice water flower! Press any material with ease This handy complete Helix Pro rosin press accessory kit comes with multiple 2" x 6" micron bag types and all the tools you need to press flower, dry sift, or ice water flower. Perfect for any press with medium plates Don't have a Helix Pro? No problem. Every accessory and tool in this kit works perfect with other rosin presses that have 7" or larger heat plates as well. Kit includes: 120x 2" x 6" rosin filter bags, 20 each of 4 key micron types (25μm, 36μm, 72μm, 90μm, 115μm, and 160μm) 1x 2" x 6" 100% aluminum, magnetized pre-press mold 100x pack of our pre-cut 35 lb 100% USA-made parchment paper 1x PurePressure silicone extraction dab mat (11.75" x 8.5") 1x PurePressure specialized rosin collection tool 1x PurePressure Turbo Funnel 1x Quick Flip tool 3x PurePressure Sticker Pack
$395.00
Helix Pro 5 Ton Manual Rosin Press
Helix Pro 5 Ton Manual Rosin Press The Helix Pro gives you unparalleled control to create the best rosin possible and features 60% more force than its smaller cousin, the Helix. Each and every Helix Pro is manufactured at our factory in Denver, Colorado from the best components available. The Helix Pro rosin press is the perfect addition to any serious home grower's arsenal or any laboratory looking to increase the precision of their rosin output. With bigger plates and more force, the Helix Pro is built for perfection. Easily press up to 12 grams of flower or 20+ grams of sift or flower per cycle Feature loaded in a conveniently sized rosin press Like its smaller cousin, the Helix Pro rosin presses are user-friendly and easy to twist press operation, with no air compressor required but provides more force and bigger plates. It features an ultra accurate force measuring load cell that displays bag pressure in real time with as little as 10lb increments. 5 tons of force for more throughput The Helix pro utilizes two 2.5" x 7" premium 6061 aluminum heat plate assemblies, each with independent thermocouples for evenly distributed heat from 0°F - 300°F and temperature accuracy to 1 degree Fahrenheit. It offers up to 5 tons of force (10,000 lbf) output from our 100% custom engineered lead screw twist press technology. Complete control at your finger tips Each Helix is built with our intuitive Pressware™ technology, which offers a full color LCD touch screen with custom software for unparalleled consistency and control. It has the ability to save up to 29 pre-set recipes so once you dial in your settings you can repeat your results exactly. Technical specifications: Up to 5 tons of force (10,000 lbf) output No air compressor required, manual twist force application Built with two 2.5" x 7" 6061 aluminum heat plate assemblies, each with independent thermocouples 0°F - 300°F temperature range Temperature accuracy to within 1 degree Fahrenheit Powder coated housing Measures 14" D x 21.4" T x 15.5" W Weights 70 lb Patent pending Available in both 110-240v electrical versions (operating voltages are set at the factory, not by the user, so please contact us for more information) 115v version electrical information: 4 amps peak draw, 460 watts, 50/60 Hz, 5-15P plug, no dedicated circuit required 230v version electrical information: 2 amps peak draw, 460 watts, 50/60 Hz, 6-15P plug, no dedicated circuit required Warranty Information: Lifetime end-user support. 2 year limited warranty against manufacturing defects for structural components (frame, truss, and support legs). 1 year limited warranty against manufacturing defects for the entire press including electronic components. PurePressure's Peace of Mind warranty is also available for only $420 and completely covers your Helix Pro rosin press for 5 years. Simply select the extended warranty option in the optional add ons section checking out or ask a PurePressure sales representative to add it to your order. The extended warranty can be bought up to 90 days after purchase. Helix and Helix Pro rosin Press User Manual
$3,995.00
Longs Peak Complete Accessory Kit
Longs Peak Complete Accessory Kit Designed for the commercial processor, this kit includes everything you need to pack, press, and collect high volumes of any material. The bags included can process over 7.7 lb of flower processing or 15.4 lb of flower or dry sift! Designed to go perfectly with any large plate high output rosin press and our Longs Peak rosin press. This kit provides you with enough bags to experiment with any material, including flower, bubble flower, sift, and more to figure out exactly where you will find your best results. Press any material with ease This handy complete Longs Peak rosin press accessory kit comes with multiple 2.5" x 9" micron bag types and all the tools you need to press flower, dry sift, or ice water flower. Perfect for any press with large plates Don't have a Longs Peak? No problem. Every accessory and tool in this kit works perfect with other rosin presses that have 10" or larger heat plates as well. Kit includes: 50x pack of 2.5" x 9" rosin filter bags in key 6 micron types, 300 bags total (25μm, 36μm, 72μm, 90μm, 115μm, and 160μm) 5x pack of 12" x 12" 5μm mechanical fractioning nylon sheets 5x pack of 12" x 12" 25μm stainless steel filter sheets 1x 2.5" x 9" 100% aluminum, magnetized pre-press mold 250x pack of 12" x 20" pre-cut 35 lb 100% USA-made parchment paper 1x Large PurePressure silicone extraction work mat (36" x 24") 5x pack of 12" x 20" PTFE reusable rosin pressing sheets 1x PurePressure specialized rosin collection tool 1x PurePressure Turbo Funnel 1x Quick Flip tool
$845.00
Dyna-Gro Grow
Dyna-Gro Grow Dyna-Gro Liquid Grow 7-9-5 is an all-purpose complete nutrition formula containing all 6 essential macronutrients and all 10 essential micronutrients that every plant needs. Grow 7-9-5 can be used to promote both foliage and blooms. Ideal for poor, rocky soils, container-grown plants, and hydroponics. Use Grow 7-9-5 as a rapid cure for nutrient deficiencies. If you are looking for a single formula to use all the time on all your plants, this is the one. Contains all 6 essential macronutrients and all 10 essential micronutrients Can be used to promote both foliage and blooms Ideal for poor, rocky soils, container-grown plants, and hydroponics
$9.56
EZ-Clone Soft Cloning Collars, pack of 35
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years. EZ-CLONE Cloning Collars are available in 17, 35, and 65 packs. Designed specifically to be used in the EZ-CLONE Cloning System Manufactured from a sterile material Available in a new high density Hard material as well as the same great Soft material
$17.64$16.62
EZ-Clone Hard Cloning Collars, pack of 65
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years. Designed specifically to be used in the EZ-CLONE Cloning System Manufactured from a sterile material Available in a new high density Hard material as well as the same great Soft material
$32.99$29.70
EZ Clone 360-Degree Replacement Mister, pack of 50
Replacement spray head for EZ-Clone systems.
$30.88$29.10
EZ Clone Clear Rez
EZ-CLONE Clear Rez™ is a pH-balanced, non-invasive water treatment designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance. It is designed to be used through out your entire cloning cycle as a possible preventive measure for a multitude of problems in your reservoir. It is suitable for all hydroponic, aeroponic and soil applications. EZ-CLONE Clear Rez is currently available in 2 oz, 4 oz, 8 oz, 16 oz, 32 oz and one gallon container sizes to fit any grower's needs. Designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance pH-balanced and non-invasive Suitable for all hydroponic, aeroponic and soil applications
$36.15 - $99.26
Grodan Round Macro Plugs w/Slit, case of 2000
Grodan Round Macro Plugs w/Slit, case of 2000 Product Details These rockwool plugs feature a slit for easy insertion of rooted cuttings. They fit perfectly into the hole of any standard rockwool block or any other type of growing medium.
$450.75$342.38
Grodan Gro Block Improved Mini Block 2" Shrink wrapped/Strip - Case of 1440
Grodan Gro Block Improved Mini Block 2" Shrink wrapped/Strip Product Details Grodan partnered with the Wageningen University and Research facility in The Netherlands and top growers throughout North America to identify the optimal stone wool substrate and irrigation strategies for specialty crops. The result of months of scientific research and trials is Grodan Gro-Blocks Improved with Grodan’s Advanced Wetting Agent. These leading-edge blocks have the optimal fiber structure and physical properties for crop uniformity, more even Water Content (WC) and Electrical Conductivity (EC) distribution throughout the entire block, and the greatest steering capabilities available. Water distribution is more uniform throughout the entire block which is the basis for a well-defined root system with higher capacities for water and nutrient uptake to produce robust and vigorous crops. New and improved wetting agent and hydrophilic technology greatly enhances the water characteristics of Grodan Gro-Blocks Improved giving even better water distribution over the height of the block. This results in greater plant development and steerability and more efficient use of water and nutrients. Optimized wool structure allows for faster rooting-in and nutrient solution replenishment, all while the Gro-Block Improved maintains its structure, firmness, and rigidity throughout the growing process.
$579.75$431.85
Grodan Gro Block Improved Mini Block 1.5"
Grodan Gro Block Improved Mini Block 1.5" Product Details Grodan partnered with the Wageningen University and Research facility in The Netherlands and top growers throughout North America to identify the optimal stone wool substrate and irrigation strategies for specialty crops. The result of months of scientific research and trials is Grodan Gro-Blocks Improved with Grodan’s Advanced Wetting Agent. These leading-edge blocks have the optimal fiber structure and physical properties for crop uniformity, more even Water Content (WC) and Electrical Conductivity (EC) distribution throughout the entire block, and the greatest steering capabilities available. Water distribution is more uniform throughout the entire block which is the basis for a well-defined root system with higher capacities for water and nutrient uptake to produce robust and vigorous crops. New and improved wetting agent and hydrophilic technology greatly enhances the water characteristics of Grodan Gro-Blocks Improved giving even better water distribution over the height of the block. This results in greater plant development and steerability and more efficient use of water and nutrients. Optimized wool structure allows for faster rooting-in and nutrient solution replenishment, all while the Gro-Block Improved maintains its structure, firmness, and rigidity throughout the growing process.
$509.55$390.71
Grodan Gro Block Improved GR5.6 Large 3" w/Hole 3" x 3" x 4" Shrink wrapped/Strip
Grodan Gro Block Improved GR5.6 Large 3" w/Hole 3" x 3" x 4" Shrink wrapped/Strip Product Details Grodan partnered with the Wageningen University and Research facility in The Netherlands and top growers throughout North America to identify the optimal stone wool substrate and irrigation strategies for specialty crops. The result of months of scientific research and trials is Grodan Gro-Blocks Improved with Grodan’s Advanced Wetting Agent. These leading-edge blocks have the optimal fiber structure and physical properties for crop uniformity, more even Water Content (WC) and Electrical Conductivity (EC) distribution throughout the entire block, and the greatest steering capabilities available. Water distribution is more uniform throughout the entire block which is the basis for a well-defined root system with higher capacities for water and nutrient uptake to produce robust and vigorous crops. New and improved wetting agent and hydrophilic technology greatly enhances the water characteristics of Grodan Gro-Blocks Improved giving even better water distribution over the height of the block. This results in greater plant development and steerability and more efficient use of water and nutrients.Optimized wool structure allows for faster rooting-in and nutrient solution replenishment, all while the Gro-Block Improved maintains its structure, firmness, and rigidity throughout the growing process.
$368.95$285.21
Grodan Gro Block Improved GR4 Small 3" x 3" x 2.6"
Grodan Gro Block Improved GR4 Small 3" x 3" x 2.6" Product Details Grodan partnered with the Wageningen University and Research facility in The Netherlands and top growers throughout North America to identify the optimal stone wool substrate and irrigation strategies for specialty crops. The result of months of scientific research and trials is Grodan Gro-Blocks Improved with Grodan’s Advanced Wetting Agent. These leading-edge blocks have the optimal fiber structure and physical properties for crop uniformity, more even Water Content (WC) and Electrical Conductivity (EC) distribution throughout the entire block, and the greatest steering capabilities available. Water distribution is more uniform throughout the entire block which is the basis for a well-defined root system with higher capacities for water and nutrient uptake to produce robust and vigorous crops. New and improved wetting agent and hydrophilic technology greatly enhances the water characteristics of Grodan Gro-Blocks Improved giving even better water distribution over the height of the block. This results in greater plant development and steerability and more efficient use of water and nutrients. Optimized wool structure allows for faster rooting-in and nutrient solution replenishment, all while the Gro-Block Improved maintains its structure, firmness, and rigidity throughout the growing process.
$306.78$285.28
You have seen 96 out of 115 products