Climate Control
Anden Hanging Kit for Models A70 & A95
The 5660 hanging kit is designed for use with Anden models A70 & A95 industrial dehumidifiers with a total safe working load of up to 400 pounds. The rugged suspension bars are created from 14-gauge zinc plated steel and include 10' cables with cripple clamps and 3.5" bolts. Kit also includes: ¼" thick neoprene pads for vibration isolation, 4 washers, 4 hex nuts, and a gripple key for installation.
$175.52
Anden Industrial Dehumidifier, 130 Pints/Day
Grow environments require high-capacity, specially-designed dehumidifiers to control humidity and protect crops. The Anden Model A130 delivers performance, capacity and reliability that is not available from the portable units sold via retail. With 130 pints per day removal capacity, integration with smart controls and a 5-year warranty, you can trust Anden to protect your crop. The Model A130 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – DH20076 (Model A76) Digital Dehumidifier Control• Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors - Dh28082 (Model 8082) Temperature/Humidity Sensor Module• Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – DH58840 (Model 8840), DH58830 (Model 8830), DH58820 (Model 8820)• Control and monitor climate conditions in your grow room 24/7/365 from anywhereOptional Hanging Kit – DH35660 (Model 5691) Features: Control: Built-in digital control with display Control mounting option: Field interchangeable from top to front Cabinet insulation: ½" EPS Air discharge orientation: Top or end Inlet/Outlet duct collars: 10" diameter Backdraft damper at outlet: Included Filter Washable: MERV 8 Refrigerant: R410A Coil type: E-coated Power cord length: 8' Discharge air temperature rise 10°F–30°F Drain connection: ¾" MNPT threaded Moveable with casters Warranty: 5 years
$1,922.06
Anden Industrial Dehumidifier, 70 pints/day
For hobbyists or smaller grow operations, the Anden Industrial Dehumidifier Model A70 is the perfect solution. Small, efficient and reliable, the A70 removes an impressive 70 pints per day of moisture from the air. Your crop’s quality is essential and the A70 was designed with healthy crops in mind. Trust the professional brand with solutions built specifically for indoor growing environments. The Model A70 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – DH20076 (Model A76) Digital Dehumidifier Control• Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors - Dh28082 (Model 8082) Temperature/Humidity Sensor Module• Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – DH58840 (Model 8840), DH58830 (Model 8830), DH58820 (Model 8820)• Control and monitor climate conditions in your grow room 24/7/365 from anywhere Optional Hanging Kit – DH35660 (Model 5660) Features: Control: Front mount only Air discharge orientation: End of cabinet only Duct collars: 8" Backdraft damper: No Filter: ½" MERV 8 washable Refrigerant: R410A Coil type: Aluminum Power cord length: 8' Hardwire option: No Discharge air temperature rise: 10°F–30°F Drain connection: ¾" MNPT Threaded
$1,443.89
Anden Industrial Dehumidifier, 710 Pints/Day, 208-240v
Anden Industrial Dehumidifier, 710 Pints/Day, 208-240v Product Details The Anden DHA710V1 is indoor agriculture’s first ever variable speed dehumidifier designed from the ground up for indoor cultivation. Our dedicated team of refrigeration engineers have developed a patent pending variable speed technology that delivers unprecedented environmental control specifically designed for the challenges of indoor cultivation. By tightly and smoothly controlling environmental conditions, both yields and overall plant quality can be greatly enhanced-leading to higher profits for the cultivator. The Anden 710 utilizes innovative patent pending variable speed technology (VLGR) to deliver high performance and efficiency throughout the grow cycle. The 710 removes more moisture across all grow conditions than any other dehumidifier on the market today. Designed from the ground up for indoor cultivation, the Anden 710 with VLGR technology allows operators to maximize moisture removal and the ability to achieve difficult VPD targets during late flower by modulating the refrigeration system to match the load. VLGR TECHNOLOGY delivers the smoothest environmental control and strongest VPD performance by utilizing a proprietary variable speed refrigeration system. From a $/pint perspective, the Anden 710 with VLGR delivers the best return on investment when compared to competitive dehumidifiers. VLGR technology allows the Anden 710 to maximize water removal while utilizing less amps. The 710 pulls 200 more pints per day on a 30 amp circuit than any other unit on the market.
$9,765.41
Anden Industrial Dehumidifier, 710 Pints/Day, 277V
Anden Industrial Dehumidifier, 710 Pints/Day, 277V Product Details The Anden DHA710V3 is indoor agriculture’s first ever variable speed dehumidifier designed from the ground up for indoor cultivation. Our dedicated team of refrigeration engineers have developed a patent pending variable speed technology that delivers unprecedented environmental control specifically designed for the challenges of indoor cultivation. By tightly and smoothly controlling environmental conditions, both yields and overall plant quality can be greatly enhanced-leading to higher profits for the cultivator. The Anden 710 utilizes innovative patent pending variable speed technology (VLGR) to deliver high performance and efficiency throughout the grow cycle. The 710 removes more moisture across all grow conditions than any other dehumidifier on the market today. Designed from the ground up for indoor cultivation, the Anden 710 with VLGR technology allows operators to maximize moisture removal and the ability to achieve difficult VPD targets during late flower by modulating the refrigeration system to match the load. VLGR TECHNOLOGY delivers the smoothest environmental control and strongest VPD performance by utilizing a proprietary variable speed refrigeration system. From a $/pint perspective, the Anden 710 with VLGR delivers the best return on investment when compared to competitive dehumidifiers. VLGR technology allows the Anden 710 to maximize water removal while utilizing less amps. The 710 pulls 200 more pints per day on a 30 amp circuit than any other unit on the market.
$9,765.41
Anden Low Conductivity Steam Canister & O-ring
Anden Low Conductivity Steam Canister & O-ring Product Details Anden Model AS80LC - Anden Low Conductivity Steam Canister & O-ringAnden Steam Humidifiers are a grow room solution that helps you achieve ideal conditions through humidity control. As water in the canister boils and turns into steam, minerals are left behind. Minerals remaining in solution increase the conductivity of the water. Minerals also deposit onto the submerged portions of the electrodes rendering those areas ineffective. As this occurs, the level of water in the canister rises to expose more uncoated electrode surface. Works with Anden Humidifier models AS35 and AS35FP INCLUDES: (1) Replacement canister (1) New O-ring into groove in drain assembly. (part #5258). Dampen O-ring with water before inserting canister. Do not use oil, grease, or any lubricant besides water Anden Humidifiers are designed with easy access for simple canister changes The Model AS80LC canister is optimized for use in areas where the water conductivity is less than 300 uS/cm or when the Steam Humidifier is installed at 120VAC . The Model AS80LC should not be used with softened water. If the Steam Humidifier is draining too frequently, the water conductivity is too high; changing to the Model AS80 canister will reduce the drain frequency
$99.92
Anden Replacement MERV 11 Air Filter
Replacement MERV 11 Media Filter for model A200V1, A300V1 & A300V3. After initial installation, the MERV 11 air filter should be replaced every 6 months. Remove the filter access panel to remove and replace the filter. 6 Filters Per Carton
$34.45
Anden Replacement Steam Canister with O-Ring
The steam canister AS80 is the beating heart of your Anden humidifier, responsible for generating steam. Current runs between two electrodes within the canister, heating your water to a boil and creating steam that is distributed through the humidifiers fan pack. Made in Madison, Wisconsin, the AS80 Steam Canister is uniquely designed to fit the Anden model AS35FP Steam humidifier. Remember to replace it at the start of each heating season for optimal humidifier performance. Genuine Anden humidifier replacement part Made in Madison, WI, USA Generates steam for your humidifier Do not use RO water with Anden humidifiers
$101.69
Anden Steam Humidifier w/Fan Pack and Digital Humidistat
Anden Steam Humidifier w/Fan Pack and Digital Humidistat The Anden model AS35FP is a high capacity electrode-type humidifier which runs independently of your HVAC system. The humidifier is capable of between 11.5 and 34.6 gallons per day, providing humidity to grow rooms up to 6,200 square feet. Running on cold water, the Anden AS35FP generates steam by energizing the two electrodes in the steam canister. Current flowing in between the electrodes causes the water to boil, creating steam. Steam is delivered into the grow/drying room via the Fan Pack. The modulating control will vary the Modulating Steam Humidifier’s output based on the difference between the set point and actual RH. When the RH set point is reached the humidifier stops producing steam and continues to energize the fan in the fan pack for 2 minutes to push any residual steam out into the grow/drying room. The Anden AS35FP has many advanced safety and operational features: Internal Control Board: Manages the complete operation of the humidifier. Fills and drains to maintain proper amperage draw, water level and notifies when service is required. Back Flow Protection : Air gap in the fill cap prevents pressure built up. Water Level Sensor : Manages the water level in the steam canister to prevent overfilling. Automatic Drain and Fill Cycle : Unit flushes and fills periodically to maintain the proper conductivity. Drain Water Tempering : Unit uses cold inlet water to temper the canister water reducing the drain water temperature below 140°F to protect PVC piping and condensation pumps. End-of-Season Drain : After a 72-hour period with no call for humidity the humidifier will drain the water from the canister. Unit will remain in stand-by until next call for humidification. Operating Time Monitor: Accumulates actual humidifier run time to activate periodic drain and fill cycles, end-of-season drain function and monitors the life of canister. A simple display panel provides the power switch for on/off operation and illuminated LEDs to show fill, drain, steam operations, and diagnostics. Maintenance is a breeze, no cleaning or scrubbing required. Simply remove the factory installed canister and replace. Each unit delivers the necessary humidity needed during early growth cycles all the way through harvest. As a steam model, the AS35FP complements non-forced air heating sources and other specialty heating systems. It requires installation by a local HVAC professional. 19.49"W x 19.36"H x 30.07"D The Model AS35FP includes: The Steam Humidifier Fan Pack Model 5558 Control Model 4028 Drain trap assembly 6' steam hose 10' drain tubing
$1,555.13$1,372.18
Atmosphere - Pro-Lite Filter
Manufactured with only the finest RC-48 Australian activated carbon, the Pro-Lite filters effectively remove 99.5% of volatile organic compounds. The PreFilter eliminates bigger particles such as dust to prevent premature usage of the carbon. Rated for a continuous worry-free operation, light weight and its compact dimensions, make the Pro-Lite filters ideal for your air filtration needs. Integrated flange Aluminum top and bottom Lightweight
$91.99$90.89
Atmosphere Pre-Filter for Pro-Lite Filter
The Pre-Filter eliminates bigger particles such as dust to prevent premature usage of the carbon.
$8.49$7.87
Autopilot - CO2 Monitor & Controller w/15' Remote Sensor
Autopilot CO2 Monitor and Controller w/15' Remote Sensor Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room's CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. The APC8200 also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want to and how you want to. The APC8200's memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your CO2 levels with this precision controller from Autopilot! FEATURES: Fully customizable ppm deadband and CO2 setpoint allow flexibility in programming Trend Chart records CO2 levels per minute, hour, day and week for accurate analysis of CO2 distribution Adjustable Trend Chart Zoom levels let you trace your ppm levels Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations 2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels Green LED identification lights inform you of the unit's status at all times
$320.99$258.83
Autopilot CO2 Generator 8 Burner
Elevated atmospheric CO2 levels show remarkable increases in plant growth productivity, and creating these elevated levels in your grow room is simply the easiest way to accelerate plant growth. Autopilot CO2 generators provide and maintain the carbon dioxide levels needed to meet maximum growing potential, and operate for only pennies a day. These highly reliable CO2 generators feature powder-coated steel enclosures that resist moisture, rust and discoloration, providing years of trouble-free operation. They are very safe and easy to operate. The built-in solid-state electronic ignition module creates a spark to light the burners. The units are also equipped with a safety tip over feature that shuts off the gas source if the unit is tipped or falls over. Autopilot generators are available in both propane and natural gas models, along with high-altitude versions in all sizes. All models are equipped with: Precision manufactured brass burners Solid-state electronic ignition module—no pilot light necessary TIP OVER switch shuts off gas source if the unit falls or tips over SHUT DOWN warning with LED error indicator lights Three sizes available—4-burner, 8-burner, and 10-burner (adjustable: 2-, 5-, 7-, or 10-burner option) 4-Burner: Spaces 14' x 14' and smaller 8-Burner: Spaces 28' x 28' and smaller 10-Burner: Spaces 35' x 35' and smaller Autopilot CO2 generators are perfectly paired with our line of Autopilot environmental controllers. NOTE: These generators require unrestricted airflow through the bottom and must be mounted by hanging/suspending.
$514.99$454.48
Autopilot CO2 Generator, 10 Burner
Elevated atmospheric CO2 levels show remarkable increases in plant growth productivity, and creating these elevated levels in your grow room is simply the easiest way to accelerate plant growth. Autopilot CO2 generators provide and maintain the carbon dioxide levels needed to meet maximum growing potential, and operate for only pennies a day. These highly reliable CO2 generators feature powder-coated steel enclosures that resist moisture, rust and discoloration, providing years of trouble-free operation. They are very safe and easy to operate. The built-in solid-state electronic ignition module creates a spark to light the burners. The units are also equipped with a safety tip over feature that shuts off the gas source if the unit is tipped or falls over. Autopilot generators are available in both propane and natural gas models, along with high-altitude versions in all sizes.All models are equipped with: Precision manufactured brass burners Solid-state electronic ignition module—no pilot light necessary TIP OVER switch shuts off gas source if the unit falls or tips over SHUT DOWN warning with LED error indicator lights Three sizes available—4-burner, 8-burner, and 10-burner (adjustable: 2-, 5-, 7-, or 10-burner option) 4-Burner: Spaces 14' x 14' and smaller 8-Burner: Spaces 28' x 28' and smaller 10-Burner: Spaces 35' x 35' and smaller Autopilot CO2 generators are perfectly paired with our line of Autopilot environmental controllers. NOTE: These generators require unrestricted airflow through the bottom and must be mounted by hanging/suspending.
$652.59$564.63
Autopilot CO2 Replacement Sensor w/15' Cable (for APC8200)
Autopilot CO2 Replacement Sensor w/15' Cable (for APC8200) Product Details This is a replacement CO2 sensor for the Autopilot APC8200 Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations 2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
$155.99$125.79
Autopilot Desktop CO2 Monitor & Data Logger
Accuracy, innovative features, and unbeatable affordability in one small, user-friendly CO2 monitor. To deliver its measurements, the Autopilot APCEM2 Desktop CO2 Monitor features a clear display system that boasts a digital memory chart of recorded CO2, relative humidity, and temperature readings over an adjustable 24-hour or 7-day period. With the industry-new feature Trend Chart, the device is able to trace the above quantities through past minutes, hours, or up to 7 days. The Autopilot APCEM2 Desktop CO2 Monitor is patent pending, featuring a hook-and-loop fastener along the back that can securely affix a rectangular external battery pack. By maximizing mobility, the device can be easily moved to any room—living room, kitchen, office—to monitor IAQ virtually anywhere. The Autopilot APCEM2 Desktop CO2 Monitor can be powered by almost any standard USB port that provides power, such as a laptop, a wall adapter, or an external mobile battery pack (PowerBank). Battery pack not included. Features: CO2/RH/Temperature monitor on a clear display Trend Chart: shows variable Min/Hr/Day/Wk for readings of CO2/RH/Temperature 2-Channel Low Drift NDIR (non-dispersive infrared) Gas Sensor Audible alarm for low/high CO2 levels Alarm function for environmental extremes 3 Multicolored LEDs for Easy Reading Built-in directory of common plant types of their general CO2 requirements; two slots for custom plant inputs Replenish CO2 Reminder: calculates time frame based on usage from past 5 days "Green" Power Supply that is compatible with a standard smartphone charger View charts as weekly, daily, hourly, or per minute Additional settings measure air quality for breathing PPM settings for tomatoes, cucumbers, and more Multiple options for hanging, mounting or desktop display Comes with two Micro USB Cables for power USB AC adapter APCEM2 Error Codes: Fault Icon Description of the fault Suggested Actions Err4 IR lamp error plebe reconnect power adapter, if the Err4 still appears, please contact the service department. Err5 Internal parameter error plebe reconnect power adapter, if the Err5 still appears, please contact the service department. Err6 Internal calculate error plebe reconnect power adapter, if the Err6 still appears, please contact the service department. Err7 temperature or humidity error plebe turn off power adapter, and put the device in a dry place more than 12 hours.
$154.99$124.98
Autopilot Desktop CO2 Monitor with Memory and Data Storage
Records and Exports 1 Year of Environmental Data! Developed to detect the presence of CO2 and to monitor temperature & relative humidity in ambient air, this device is smart, compact and easy to use. Its high quality LCD display, and it features independent CO2, RH and temperature readings. In addition, the APCEMDL comes equipped with a built-in microSD card port that automatically records all environmental data to an included microSD card. Assess and improve your grow room climate with Autopilot’s precision monitor with exportable memory. Records and Exports 1 Year of Environmental Data! Measures & records CO2 levels, room temperature, and relative humidity Continuously records data to the included microSD card every 5 seconds Exported data is converted to Microsoft Excel file format for easy review Micro USB power socket, Micro USB-to-USB power cord, and USB power adapter Max and Min readings of CO2, Temp and RH are shown on screen at each Zoom Level Units screen displays 17 sets of data at each Zoom Level: 1 minute, 1 hour, 24 hours and 7 days
$179.99$119.86
Brass Plug for Autopilot CO2 Generators
Brass Plug for Autopilot CO2 Generators Co2 Generator brass plug. Works with both natural gas and propane CO2 generators. Creates a reliable and secure connection. Note: When reducing outlets, start from the back row forward. High quality brass Works with both natural gas and propane CO2 generators Secure connection
$3.81$3.70
Bug Shield
Block the bugs—and so much more! Our Bug Shield plastic mesh bug screen catches insects of all kinds, as well as stopping potentially damaging fungal spores. Use it on your fans and ducting, as it is suitable for both intake and exhaust purposes. The Bug Shields feature washable materials, an elasticized opening, and an adjustable drawstring to seal off a perfect fit.
$14.62$14.43
CO2 Controller with High-Temp Shutoff
Simple CO2 controller with display and day/night detection. Very easy to install and set up. The PNG-060 comes with a high temperature shutoff to protect your plants from overheating: CO2 enrichment is stopped when the temperature set point is reached. Displays ambient CO2 level Day and night detection Adjustable CO2 setpoint from 400 ppm to 2100 ppm High temperature shutoff feature from 50°F to 130°F Adjustable differential Easy one-button calibration 3-year warranty 15A/120V/60Hz Made in North America
$464.99$308.50
ExHale CO2 - The Original CO2 Bag
The Original ExHale CO2 Bag produces CO2 24 hours a day with no need to refill bottles or use expensive CO2 production units. The power of ExHale lies in the mycelial mass inside the vented bag. This mycelial mass produces CO2 and the microporous breather patch releases CO2 continually for at least 6 months. On average our CO2 bags will raise the CO2 level by 500 ppm above ambient air levels. The Original ExHale CO2 Bag is designed for small to medium sized grow spaces. The Original will provide a 4x4 foot or 128 cubic foot space with CO2 for 6 months guaranteed. The ExHale Original comes with a freshness seal that doubles as a hanger. Steady supply of CO2 for 6 months guaranteed Maintenance free No heat No electricity Patent pending genetics Suitable for Organic Production Made in the USA How to Use ExHale ExHale comes complete, simply follow the instructions and place the ExHale bag in your grow space and leave it alone to do its job. A continuous shower of CO2 directly onto your plants is the most efficient way to deliver CO2. Placing the ExHale CO2 Bag slightly above the level of your plants will ensure they receive the CO2 they need 24 hours a day for up to 6 months. ExHale can be used in both cycles of plant growth (Vegetative & Flower)
$33.95$32.16
GREE - Mini-Split Line Set
Mini-Split Line Set 1/4 "x 1/2 "x 25 ft, 14-4 AWG Wire & Insulation Mini-Split Line Set 1/4" x 5/8" x 25 ft, 14-4 AWG Wire & Insulation
$249.97 - $279.64
GREE - VIREO+ 24,000 BTU 20 SEER Indoor Unit, 208-230V
The New Gree VIREO+ Wall Units are a perfect option for your home or office needs. Each Vireo+ Mini split indoor unit is designed to blend well in any living space with a large LED display and multi-functional infrared hand held remote control. With multiple speed fan, the indoor fan can operate at one of four speeds (low, medium, high or turbo) for cool or heat mode, to provide maximum comfort and quiet operation.*A 5/8” line-set (sold separately) is required for installation – item code TW75825L Features 22,000 BTU cooling and 23,000 BTU heating for powerful temperature control Heat or cool up to 1,000 sq. ft. to keep your living space comfortable G10 inverter technology allows the system to ramp up or slow down avoiding frequent starts and stops resulting in a more comfortable climate and better air quality Digital thermostat read-out on both unit and remote to set to desired temperature Low-decibel operation won't interfere with normal conversation Vertical Swing Louver Blue fin condenser coil coating helps prevent corrosion and leads to longer life Wi-Fi ready (sold separately, item code TW60060A) Controller ready (sold separately, item code TW60030A) ETL Listed and AHRI Certified *Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty. CA Prop 65 Warning Applies to this product
$933.99$770.54
GREE - VIREO+ULTRA HEAT 36,000 BTU 23 SEER Indoor Unit, 208-230V
The 23 SEER VIREO+ Wall Mount units brings dramatic new performance and style to every room. Never before has it been so easy to maintain constant indoor comfort, no matter the outdoor conditions. *A 5/8” line-set (sold separately) is required for installation – item code TW75825LFeatures 33,000 BTU cooling and 34,600 BTU heating for powerful temperature control Heat or cool up to 1,600 sq. ft. to keep your living space comfortable Ultra-Heating ( down to -31° F) G10 inverter technology allows the system to ramp up or slow down avoiding frequent starts and stops resulting in a more comfortable climate and better air quality Digital thermostat read-out on both unit and remote to set to desired temperature Low-decibel operation won't interfere with normal conversation Waterfall heating and cooling via auto-rotating deflectors Blue fin condenser coil coating helps prevent corrosion and leads to longer life Wi-Fi ready (sold separately, item code TW60060A) Controller ready (sold separately, item code TW60030A) ETL Listed and AHRI Certified *Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty. CA Prop 65 Warning Applies to this product
$1,941.99$1,602.14
GREE - VIREO+ULTRA HEAT 36,000 BTU 23 SEER Outdoor Unit, 208-230V
The 23 SEER VIREO+ Wall Mount units brings dramatic new performance and style to every room. Never before has it been so easy to maintain constant indoor comfort, no matter the outdoor conditions.Features• 33,000 BTU cooling and 34,600 BTU heating for powerful temperature control• Heat or cool up to 1,600 sq. ft. to keep your living space comfortable• Ultra-Heating ( down to -31° F)• G10 inverter technology allows the system to ramp up or slow down avoiding frequent starts and stops resulting in a more comfortable climate and better air quality• Digital thermostat read-out on both unit and remote to set to desired temperature• Low-decibel operation won't interfere with normal conversation• Waterfall heating and cooling via auto-rotating deflectors• Blue fin condenser coil coating helps prevent corrosion and leads to longer life• Wi-Fi ready (sold separately, item code TW60060A)• Controller ready (sold separately, item code TW60030A)• ETL Listed and AHRI Certified *Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty. CA Prop 65 Warning Applies to this product
$3,612.99$2,980.72
GREE - XK41 Wired Controller with Backlight
This XK series Wired Tether Controllers features a sleek, unobtrusive design that fits seamlessly into any decor. The Controller have been designed for fast and easy installation to save you time and money. Each XK wired controller comes with keyed connectors and 26 feet of cable. Its flexible design allows it to be mounted either flush to the wall or using an electrical box. Enjoy the convenience of a fully functional command center with a large LCD display to set up and operate your duct free system. The Controller allows you fast and easy access to a large number of Neo Mini-Split system features and functions.Features: Tactile Feedback Keypad Easy Setup and Programming Sleek Thin Design Blends into any Décor Convenient LCD Display Backlighting Reaches up to 26 feet. Ready to use cable included. No Batteries Required
$98.99$90.33
GREE LIVO Gen3 System 24000 BTU
GREE LIVO Gen3 System 24000 BTU Product Details GREE LIVO Gen3 24,000 BTU 19 SEER Outdoor Unit, 208-230V (GREE # LIVV24HP230V1AO)Slim, stylish and elegant, the new Livo Gen3 high wall units are the latest addition to the Gree comfort family. These 19-SEER heat pump systems are built around Gree's G10 Inverter and variable compressor technology, using environmentally friendly R410a refrigerant.Each Livo Gen3 mini split indoor unit is designed to heat and cool a single room, and will blend seamlessly into any decor. The unobtrusive front panel features a virtually hidden digital LED display, and the unit operates quietly, day after day. *A 5/8” line-set (sold separately) is required for installation – item code TW75825L *To complete the AC system this outdoor unit needs to pair with the indoor wall unit - item code TW17423B *To complete the AC system indoor wall unit TW17423B needs to pair with the outdoor condensor unit - item code TW17425C Features 22,000 BTU Cooling and 24,000 BTU Heating for powerful temperature control Heat or cool up to 1,100 sq. ft. to keep your living space comfortable G10 inverter technology allows the system to ramp up or slow down avoiding frequent starts and stops resulting in a more comfortable climate and better air quality Digital thermostat read-out on both unit and remote to set to desired temperature Low-decibel operation won't interfere with normal conversation Waterfall heating and cooling via auto-rotating deflectors I Feel function senses the temperature surrounding the remote control to adjust airflow and indoor temperature Blue fin condenser coil coating helps prevent corrosion and leads to longer life Wi-Fi ready (sold separately, item code TW60060A) Controller ready (sold separately, item code TW60030A) ETL Listed and AHRI Certified Cooling range 0 - 115 °F Heating range -4 - 75 °F max line length 82' *Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty. CA Prop 65 Warning Applies to this product For submittals, spec sheets, install manuals, certificates, and more, please CLICK HERE This SKU TW17421S is a pick kit that ships in multiple boxes. It is comprised of the following SKUs: (1) TW17423B - GREE LIVO Gen3 24000 BTU 19 SEER Indoor Unit 208-230V (1) TW17425C - GREE LIVO Gen3 24000 BTU 19 SEER Outdoor Unit 208-230V
$1,793.99$1,268.97
GREE LIVO Gen3 Sytem
GREE LIVO Gen3 System Product Details *A 3/8” line-set (sold separately) is required for installation – item code TW73825L *To complete the AC system outdoor condensor TW15225C unit needs to pair with the indoor wall unit - item code TW15223B The 17-SEER GREE LIVO Gen3 High Efficiency Ductless Mini-Split w/ Heat Pump system is compact, quiet and comes in a variety of sizes to heat and cool any room. The LIVO outdoor compressor section is powered by a twin rotary compressor with GREE's DC Inverter technology. This inverter technology with eco-friendly R-410a refrigerant to saves you energy, reduces outdoor noise and keeps room temperature steady by eliminating the constant starts and stops of conventional air conditioning systems. The LIVO indoor unit is designed to be a comfortable fit in virtually any living space. The unobtrusive front panel features a virtually hidden digital LED display, and the unit operates quietly, day after day. This Kit code includes: The indoor air handler (item TW15223B) and the outdoor compressor unit (item TW15225C). Each LIVO Gen3 mini split indoor unit is designed to heat and cool a single room, and will blend seamlessly into any decor. The unobtrusive front panel features a virtually hidden digital LED display, and the unit operates quietly, day after day. Features 12,000 BTU Cooling and 13,000 BTU Heating for powerful temperature control Heat or cool up to 550 sq. ft. to keep your living space comfortable G10 inverter technology allows the system to ramp up or slow down avoiding frequent starts and stops resulting in a more comfortable climate and better air quality Digital thermostat read-out on both unit and remote to set to desired temperature Low-decibel operation won't interfere with normal conversation Waterfall heating and cooling via auto-rotating deflectors I Feel function senses the temperature surrounding the remote control to adjust airflow and indoor temperature Blue fin condenser coil coating helps prevent corrosion and leads to longer life Wi-Fi ready (sold separately, item code TW60060A) Controller ready (sold separately, item code TW60030A) ETL Listed and AHRI Certified Cooling range 0 - 115 °F Heating range -4 - 75 °F max line length 66' GREE LIVO Gen3 12000 BTU 17 SEER Outdoor Unit 208-230V (TW15225C) Units are the latest addition to the Gree comfort family. These 17-SEER heat pump systems are built around Gree's G10 Inverter and variable compressor technology, using environmentally friendly R410a refrigerant. *Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty. CA Prop 65 Warning Applies to this productFor submittals, spec sheets, install manuals, certificates, and more, please CLICK HERE This SKU is a pick kit that ships in multiple boxes. It is comprised of the following SKUs: (1) TW15223B - GREE LIVO Gen3 12000 BTU 17 SEER Indoor Unit 208-230V (1) TW15225C - GREE LIVO Gen3 12000 BTU 17 SEER Outdoor Unit 208-230V
$965.99$699.00
GREE VIREO ULTRA 36,000 BTU 23 SEER System
GREE VIREO ULTRA 36,000 BTU 23 SEER System Product Details TW2436S - GREE VIREO+ULTRA HEAT 36,000 BTU Mini Split Set 208-230VKit / Bundle The 23 SEER VIREO+ Wall Mount units brings dramatic new performance and style to every room. Never before has it been so easy to maintain constant indoor comfort, no matter the outdoor conditions. Vireo+ has you covered with a multitude of features that help you live well and stay comfortable, all controlled easily – either with the wireless infrared remote controller or optional wired controller. There’s even an option to upgrade to Universal Wi-Fi Technology by purchasing the Wi-Fi Kit With the advanced I FEEL mode, Vireo+ senses the temperature surrounding the remote controller, then adjusts airflow and temperature accordingly to create maximum comfort in all the right places. In heating mode, the system guards against bothersome chills with its intelligent pre-heating feature, which delays the fan until the coil has warmed up to keep it from blowing cold air into the room. Every part of the room can stay comfortable by adjusting vertical swing louvers in multiple directions, including continuous sweep. And three different sleep modes automatically adjust the temperature to guarantee a good night’s rest. With four different fan speeds for maximum comfort and whisper quiet operation, you won’t even notice how hard Vireo+ is working to keep you comfortable. *A 5/8” line-set (sold separately) is required for installation – item code TW75825LFeatures 33,000 BTU cooling and 34,600 BTU heating for powerful temperature control Heat or cool up to 1,600 sq. ft. to keep your living space comfortable Ultra-Heating ( down to -31° F) G10 inverter technology allows the system to ramp up or slow down avoiding frequent starts and stops resulting in a more comfortable climate and better air quality Digital thermostat read-out on both unit and remote to set to desired temperature Low-decibel operation won't interfere with normal conversation Waterfall heating and cooling via auto-rotating deflectors I feel function senses the temperature surrounding the remote control to adjust airflow and indoor temperature Blue fin condenser coil coating helps prevent corrosion and leads to longer life Wi-Fi ready (sold separately, item code TW60060A) Controller ready (sold separately, item code TW60030A) ETL Listed and AHRI Certified *Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty. CA Prop 65 Warning Applies to this product
$5,468.99$4,511.92
Green Pad CO2 Generator, pack of 5 pads w/2 hangers
GET THE GOOD GAS TO YOUR PLANTS! EASY TO USEALWAYS FRESHEFFECTIVE MADE IN THE USA"CO2 ACTIVATED BY HUMIDITY CHEMISTRY" The GREEN PAD CO2 generators has made adding Carbon Dioxide to indoor gardens easier than ever. THE GREEN PAD absorbs the humidity in your indoor garden, to power its natural chemical reaction, releasing a measured amount of carbon dioxide. When it comes to supplementing your garden with CO2, THE GREEN PAD may be one of the most inexpensive and innovative ways to get the good gas to your plants. THE GREEN PAD's were designed to produce enough CO2 to be of significant benefit to the indoor home garden without the up front expense of equipment, but with similar results. "The Green Pad is the real deal. Digital meters show high levels of CO2."Casey Jones Fraser FOR ALL YOUR CURRENT TANK CUSTOMERS THAT USE TANKS.Do not get in a situation where you run out of CO2. THE GREEN PAD is your backup for growers using CO2 tanks that run empty. Keep an extra pack on hand for emergencies or when you cannot get a tank refill. Without expirations issues, THE GREEN PAD's are ready when your garden needs them. EASY TO USE: To raise your PPM's follow the directions and hang 1-2 GREEN PADS above your canopy per every 200-400 cubic feet of garden space. Activated by humidity (35%) and /or by lightly misting with water or, adding a moist sponge to a folded GREEN PAD. Add new GREEN PADS each week, discard after 2 weeks. Adding more of THE GREEN PADS will increase your PPM's in your specific area.
$29.95$28.15
Green Pad Grand Daddy Pad CO2 Generator, pack of 2 pads w/1 hanger
BIGGER, STRONGER, LAST LONGER, FOR LARGER GARDENS! NO HEATNO HASSLENO EQUIPTMENT MADE IN THE USA"CO2 ACTIVATED BY HUMIDITY CHEMISTRY" The GRAND DADDY PAD CO2 generators has made adding Carbon Dioxide to indoor gardens easier than ever. THE GRAND DADDY PAD absorbs the humidity in your indoor garden, to power its natural chemical reaction, the newest in this line of GREEN PAD CO2 generators. THE GRAND DADDY PAD or GDP is the largest and strongest GREEN PAD. Each GDP has the power of 4 original GREEN PADS giving the growers a better value. "Phenominal product, they work awesome and I can barely keep them on my shelves." Jamie - Third Coast Garden Supply, MI EASY TO USE: To raise your PPM's follow the directions and hang 1 GRAND DADDY PAD above your canopy per every 800 cubic feet of garden space. Activated by humidity (35%) and /or by lightly misting with water or you can add a moist sponge to a folded GRAND DADDY PAD. Add new GDP's every 10-12 days, discard after 3+ weeks. Adding more of THE GRAND DADDY PADS will increase your PPM's in your specific area. FOR ALL YOUR CURRENT CUSTOMERS THAT USE TANKS.Do not get in a situation where you run out of CO2. The GRAND DADDY PAD is your backup for those growers using CO2 tanks that run empty. Keep an extra pack on hand for emergencies or when you cannot get a tank refill. Without expirations issues, The GRAND DADDY PADS are ready when your garden needs them.
$34.95$31.46
Green Pad Jr. CO2 Generator, 10 pads
THE GREEN PAD JR. JUMP START YOUR CLONES WITH CO2! HIGHER STRIKE RATES FASTER ROOTING LESS LEAF YELLOWING! MADE IN THE USA "CO2 ACTIVATED BY HUMIDITY CHEMISTRY" The first and most effective commercial CO2 supplement made specifically for your seedlings and clones.THE GREEN PAD JR absorbs the humidity in your propagation dome, to power its natural chemical reaction, releasing a measured amount of carbon dioxide. CO2 accelerates the natural rooting process for cuttings and seedlings so they can establish healthy roots and more nodes by feeding the leaves. This helps the cuttings and seedlings to root faster so you can move to VEG sooner and grow healthier larger fruits, herbs and vegetables. "When I saw my CO2 PPM meter reading 1000 parts per million in only 30 minutes I KNEW MY CLONES WOULD FLOURISH, and I was RIGHT!"Steve N. San Diego, CA EASY TO USE: Simply place 1 GREEN PAD JR. in your dome and replace with a new one every other day until your rooted or you remove the dome. Reseal the package and use remaining pads when needed. The unused pads will be ready to use and will NOT activate until you need them.
$14.95$14.05
Ona Block, Fresh Linen, 6 oz
The ONA Block is ideal for small areas such as closets, foyers, attics, cars, gym bags, boats, kitchens, garbage cans, cupboards or vents. Simply remove the cap, or punch several small holes in the cap and place in desired location. The ONA Block measures 3" x 3" and will fit in most places. The ONA Block will release its powerful odor neutralizing agent and keep the location free from undesirable odors. Replace as necessary.
$11.01
Ona Gel, Fresh Linen
ONA (Odor Neutralizing Agent) products are designed using scientific principles of molecular bonding. Two odors can offset one another when they combine to form a bond. ONA's active ingredients come from a blend of 32 essential oils and plant-derived compounds that bond with and neutralize a wide array of odors. ONA Gel is saturated with ONA liquid concentrate; gardeners simply remove the lid from the jar or pail to expose it to the air and remove odors from the source. Ona Gel is one of Ona's most popular products. Many years were spent developing a blend of Ona and various suspension elements to result in a product that has excellent dispersion qualities. The Ona odor neutralizing agents are released in a controlled manner so that every molecule is fully optimized. Ona Gel is an odor neutralizer in a gel form and is dispensed by natural evaporation. It is powerful yet safe to use around people, pets and plants. Ona Gel is non-toxic and environmentally friendly. Fresh Linen scent. Designed using scientific principles of molecular bonding 32 essential oils and plant-derived compounds that bond with and neutralize a wide array of odor Fresh Linen scent
$21.31
Ona Liquid, Fresh Linen
This liquid form of ONA can be sprayed into the air to neutralize odors. Use a pistol grip sprayer or larger pump sprayer for desired effect. It can also be used to reconstitute the ONA gel. ONA (Odor Neutralizing Agent) products are designed using scientific principles of molecular bonding. Two odors can offset one another when they combine to form a bond. ONA's active ingredients come from a blend of 32 essential oils and plant-derived compounds that bond with and neutralize a wide array of odors. Fresh Linen scent.
$46.87 - $168.56
Ona PRO Gel
ONA PRO is new and exciting! These are prefessional grade products.The first product in this series is ONA PRO Gel. Constantly striving to improve their odor neutralizing products, they have developed a formulation that takes odor control to a new level. ONA PRO Gel is as close to odorless as ONA has ever come. Although it has a slight scent when sniffed in the container, the final result when working on powerful, noxious odors is simply a clean, fresh smell—period. It leaves nothing behind to indicate that any odors were present. ONA PRO Gel is the best we've ever done, and it is all you will ever need. No scrubbers, no filters, nothing—just ONA PRO. Ona offers a MONEY BACK GUARANTEE if you are not satisfied with the results.
$21.31
Phat - HEPA Intake Filter
The tightly woven synthetic HEPA fibers in this filter will help prevent mold, bacteria, pollen, insects and plant pests from entering your growroom or greenhouse. The HEPA fibers block out most airborne particles down to .3 microns in diameter. That is 300 times smaller than the diameter of a human hair. This is a serious insurance filter, without it you are leaving your grow room susceptible to the elements. The filter is also washable for extended efficiency.
$127.04$112.42
Phat Fan - Fan
The Phat Fan is an inline mixed flow fan capable of medium to high static pressure. This line of fans features aerodynamically optimized airflow, quiet operation, and extremely high efficiency. • Mixed flow impeller designed for high-flow operation• Extreme motor cooling for improved life performance• Super-efficient speed controllable motor to better adapt to individual needs• Motor safeguarded with thermal overheat protection• Stable mounting bracket offers easy installation• Energy efficient• Thermal overload protection NOTE: Not for use with fan speed controller (ACSC)
$197.75$139.04
Phat Pre-Filter
Phat Filter replacement pre-filter replaces your used pre-filter to give your Phat filter longer life by filtering out larger impurities before they have a chance to enter into the actual filter. Each pre-filter is stamped with the Phat Filter logo and fits snugly over your Phat filter. The pre-filter is available in all Phat Filter sizes and can be easily slid over the filter and secured with the plastic straps provided. If your pre-filter is dirty or discolored, it's time to change it. Contents: 1 pre-filter & 2 plastic straps.
$6.40 - $16.19
Reducer
These galvanized duct reducers can be used with fans, ducting, air-cooled hoods, and ventilation systems. They allow you to connect two sides of different diameters (for example, mating ducting of one diameter to an inline fan of a different diameter).
$12.70$12.54
Schaefer 20" Oscillating Fan Head with OSHA Guards - Black
Geared for performance, Twister's oscillating motor utilizes highest quality metal gear design for unparalleled strength, greater load capacity and higher accuracy. Whether aimed at a workstation using a standard wall mount or down an aisle or assembly line using a pedestal, Twister provides the versatility and performance needed to improve worker productivity and safety. Features and Benefits: Schaefer oscillation technology 2-speed high efficiency motor with 10 foot cord OSHA compliant guards, available in black or white 90˚ of total oscillation 45˚ of fan head adjustability up or down Low noise levels, quieter than conversational voice Fixed or portable mounting capabilities Assembled in the USA *Bracket sold separately - recommended model PCWMTA24-B, PCVS24FMT
$601.99$463.20
Schaefer Versa-Kool High Velocity Greenhouse Fan
Product Details Schaefer Versa-Kool High Velocity Greenhouse FanReduce heat stress and improve air quality with Schaefer's uniquely designed circulation fans. Unrivaled in the market, these fans are engineered to produce greater air movement and superior cooling no matter the application. You don't hear them. You don't see them. You only feel them!Also known as Horizontal Air Flow (HAF) fans, these fans move air in a coherent horizontal pattern creating a gentle 'racetrack' air flow pattern needed in greenhouses to maximize heat distribution and humidity control by mixing the air, from ceiling to floor. Features and Benefits: Deep guard design for unmatched performance, low noise levels and safety without sacrificing airflow Matched high quality motors and blades for maximum efficiency Powder coated steel guards for increased durability and corrosion resistance Hot dipped galvanized guards on VK12-GA and VK20-GA models for even greater rust protection Powder coated steel mounting bracket and power cord included Wide variety of mounting options available for flexible and easy installation Variable speed controls available Misting kits available for even greater cooling Two year warranty Made in the USA
$291.99$224.40
Stainless Steel Duct Clamps
Stainless Steel Duct Clamps Features Available in 4", 6", 8", 10", and 12" Stainless steel and rust resistant Worm drive adjustable w/screwdriver for a super-secure fit Two per pack Product Min Diameter Max Diameter ACC4 4" 3 3/8" 4 5/8" ACC6 6" 5 3/8" 6 5/8" ACC8 8" 7 3/8" 8 5/8" ACC10 10" 9 3/8" 10 5/8" ACC12 12" 11 3/8" 12 5/8" Stainless steel and rust resistant Worm drive adjustable w/screwdriver Two clamps per pack Secures ducting tightly in place Classic hose clamp design
$2.39$2.36
TNB Naturals The Enhancer CO2 Caniste
TNB Naturals The Enhancer CO2 Canister Product Details The Enhancer is an all natural CO2 generator made from 100% organic ingredients. This safe and effective solution for CO2 supplementation creates a blast of CO2 that can reach 1200 PPM in a 12’x12’x12’ area for up to 2 weeks. Activate The Enhancer by adding 1 litre of warm water, placing the lid back on, removing the sticker on the lid, covering the small hole with your thumb and giving the bottle a quick shake. The Enhancer works off the natural phenomena known as photosynthesis and will begin to disperse CO2 within a few minutes of being activated. For optimal performance shake The Enhancer once a day in a 12'x12'x12' area and once every second day in a 6'x6'x6' area. The simplicity and ease of use, along with the fact that The Enhancer does not produce heat or require any additional equipment, makes this the future of CO2 production. Always Fresh Water Activated Hits High PPM's Inexpensive Start-Up Doesn't Produce Heat No Equipment Needed Slows CO2 Release At Night The Enhancer CO2 - Set Up Instructions Remove lid and add 1 litre (4 cups) of lukewarm water. Place lid back on and remove the sticker. Shake canister well while covering the hole on lid. Hang the canister above the desired plants in an upright position. CO2 being a heavier air will cascade down over the plants.Place an oscillating fan to evenly spread the CO2 around the room. Higher CO2 levels allow the plants to handle higher temperatures. If exhausting, place The Enhancer as far away from the vent as possible. SDS TNB Naturals the Enhancer 2020 Shipment Restrictions Due to state restrictions, we are unable to ship this product to the following location(s): OREGON
$39.99$35.50
TNB Naturals The Enhancer CO2 Canister Refill Pack
TNB Naturals The Enhancer CO2 Canister Refill Pack Product Details TNB Naturals The Enhancer Refill Pack The Enhancer now comes in a convenient refill pack! The TNB CO2 Refill Pack gives growers the ability to reuse their existing Enhancer bottle while saving money and reducing their environmental footprint at the same time. Simply empty the contents of the original bottle and give the bottle a quick rinse. The contents of the Refill Pack can be added and instantly CO2 is once again available for use. Boosting plant production and improving overall health, CO2 is an essential element of photosynthesis and often one of the most overlooked components of plant growth. The TNB CO2 Refill Pack consists of the same great recipe while combining convenience and an amazing option for those looking for passive CO2. Research has shown that plants can use up to five times the CO2 that naturally occurs in the air. With The Enhancer known for delivering levels of CO2 only comparable to a propane or natural gas burner, there is no question many growers will be turning in their tanks and introducing CO2 with this safer and all natural method. Shipment Restrictions Due to state restrictions, we are unable to ship this product to the following location(s): OREGON
$19.99$18.64
Vortex Mounting Bracket
Made from galvanized steel, these mounting brackets are available for all sizes of Vortex Powerfans. They are made to be mounted in all positions either horizontally or vertically. They come in a 3-piece set, except for VTX400, VTX500 and VTX600L models, which only need two pieces for mounting. The necessary screws are also included. Available for all sizes of Vortex Powerfans Made from galvanized steel Made to be mounted in all positions either horizontally or vertically
$14.99$14.09
Vortex Powerfan S-Line
The S-line is a revolutionary series of fans that combine energy efficiency, ultra-quiet operations and a collection of advanced technologies that deliver unparalleled performances. An extremely energy efficient AC brushless motor powers the patented mixed-flow dual impellers. Built with double insulated walls, noise is reduced to levels that were previously thought to be unattainable. All S-Line models are assembled with high impact resistant polycarbonate casings, an integrated back draft damper and a mounting bracket designed for quick and easy installation. Vortex Powerfans VTX Series and S-Line are now AMCA certified for performance and sound!AMCA (Air Movement and Control Association) certified ratings program is a globally recognized third-party program that gives buyers, specifiers and users assurance that manufacturers' published data for air movement and control products are accurate.
$368.99$298.03
Vortex Powerfan S-Line, 10", 1082 CFM
S-line Mixed Flow Fans are designed for residential and light commercial ventilation applications. These compact, powerful, and quiet fans are ideally suited for either supply or exhaust ventilation systems. • Powerful, compact, and quiet mixed flow impeller• Easy to install - mounting brackets included• 100% speed controllable• May be mounted in any position• Suitable for airstream temperatures up to 140°F (60°C)• Prewired with 120V cord• Energy efficient variable speed motor• Fan and motor are precisely balanced for a quiet and vibration-free operation• ETL-listed• AMCA-listed
$572.99$462.80
You have seen 96 out of 99 products