Carts & Fillers

10 products


  • Lab Dosing Gun Filler 50 Milliliter Pistol Grip Shop Brands BVV

    Lab Dosing Gun Filler 50 Milliliter Pistol Grip (1ml Incremental Shots)

    Heated Filling Gun with Stainless Steel Barrel 30 Day Limited Warranty The BVV™ Semi-Automatic Lab Dosing Gun can is easily adjusted to fill in 1ml, 2ml, 3ml, 4ml, and 5ml increments.  You can quickly and accurately fill your cartridges. The heated barrel has a digital controller that allows the user to set a temperature from (Room Temperature - 190°F) in increments of 1.0°F. The Filler comes ready to use, first clean the components, plug it in and attach the included 14 Gauge Tip. Specifications: Polypropylene Barrel – Chemically Resistant to: Isopropyl Alcohol, Ethanol, Butane, Hexane, Glycerin, Glycols, Terpenes, and most Acids 14 Gauge lure lock needle included 110V USA Plug Adjusts from 1-5ml Shots (1ml increments) Lure Lock Hub for all types of size attachments Extra Barrel Plunger Gasket included Adjustable plunger tension/tightening (*for user preferred plunger action) Built-in Temperature Cutoff @190F. 5ft Power Cord 3ft Heat Cord to Control Box. Assembled weight 1lb. 8oz. Cleaning: NOTE: Please Clean Prior to first use gun does not come sterilized. Cleaning the barrel and components can be done with De-limonene, other chemicals can be used, however, *The Barrel Gasket is made of Nitrile and can degrade with overexposure to chemicals like Isopropyl Alcohol. To Fill the Syringe:Advance the plunger all the way to the needle tip of the barrel. Place the needle into the Oil and pull the plunger all the way back until it stops. The barrel will be filled. Increasing the Max Temperature: The Max Temperature Setting is 190°F. To increase the temperature beyond that, the user will need to follow the included instruction to unlock and change the max temp. (Absolute Max. is 212°F) Lab Dosing Gun User Manual PDF

    $250.00

  • Vape Cartridge Filler 25 milliliter Pistol Grip

    Lab Dosing Gun 25 milliliter Pistol Grip (0.5ml Incremental Shots)

    Lab Dosing Gun 25 milliliter Pistol Grip 30 Day Limited Warranty The BVV™ Semi-Automatic Lab Dosing Gun can is easily adjusted to fill in 0.5ml, 1ml, 1.5ml, 2ml, and 2.5ml increments. You can quickly and accurately fill your cartridges. The heated barrel has a digital controller that allows the user to set a temperature from (Room Temperature - 190°F) in increments of 1.0°F. The Filler comes ready to use, just plug it in and attach the included 14 Gauge Tip. Specifications: Polypropylene Barrel – Chemically Resistant to: Isopropyl Alcohol, Ethanol, Butane, Hexane, Glycerin, Glycols, Terpenes, and most Acids 14 Gauge lure lock needle included 110V USA Plug Adjusts from 0.5-2.5ml Shots (0.5ml increments) Lure Lock Hub for all types of size attachments Extra Barrel Plunger Gasket included Adjustable plunger tension/tightening (*for user preferred plunger action) Built-in Temperature Cutoff @190F. 5ft Power Cord 3ft Heat Cord to Control Box. Assembled weight 10oz. Cleaning: NOTE: Please Clean Prior to first use gun does not come sterilized. Cleaning the barrel and components can be done with De-limonene, other chemicals can be used, however, *The Barrel Gasket is made of Nitrile and can degrade with overexposure to chemicals like Isopropyl Alcohol. To Fill the Syringe:Advance the plunger all the way to the needle tip of the barrel. Place the needle into the Oil and pull the plunger all the way back until it stops. The barrel will be filled. Increasing the Max Temperature: The Max Temperature Setting is 190°F. To increase the temperature beyond that, the user will need to follow the included instruction to unlock and change the max temp. (Absolute Max. is 212°F) Lab Dosing Gun User Manual PDF

    $250.00

  • Vape Cartridge Pen Filler XL 6 Liter Shop Brands BVV

    Table Top Cart Filler XL 6 Liter

    Table Top Cart Filler XL 6 Liter Fill 6000 1ml Carts per Load This 6 Liter capacity Giant is made to fill.  Fully jacketed 304SS with a design that allows the OIL inside to fully drain creating little to no loss.  The system is made of all parts that can be sterilized.  The body, valves and all connections are 304 Stainless Steel and the hosing is PTFE. The body of the vessel is fully jacked and is recommended to be run with stand alone heater to pre-heat the oil.  The hose is heated and insulated.  The hose temperature is controlled by an Digital PID.  The hose and PID controller are precision made in the USA.  The hose uses Platinum Thermocouples for durability and accuracy, which means you wont run into down time or temperature errors.   To use the system you will need Nitrogen to back pressure the oil in the tank.  The pressure is regulated by a low pressure regulator.  To dispense the end of the hose has a toggle valve that connects to a Lure Lock connection.   System Specs.  Nitrogen Input MAX Pressure: 150PSI Regulator working pressure: 0.5-30PSI (*recommended pressure 10PSI) Hose Temperature Rating: 50°F - 450°F Digital* Controller Temperature Range: 50°F -450° Includes Right Angle Attachment for added user flexibility. Non-Metered Dispensing with toggle valve control. Pressure gauge for pressure monitoring: 0-150PSI Cleaning: NOTE: Please Clean Prior to first use the system does not come sterilized.  A simple IPA wash down will be sufficient.  At any point the system can be cleaned using IPA or D-limonene.   *The controller has  been updated to a Digital PID controller to replace the photographed analog style rotary dial.  

    $2,400.00

  • Vape Cartridge Pen Filler XL 6 Liter Kit Shop Brands BVV

    Table Top Cart Filler XL 6 Liter & Heater Kit

    Table Top Cart Filler XL 6 Liter & Heater Kit Fill 6000 1ml Carts per Load This 6 Liter capacity Giant is made to fill.  Fully jacketed 304SS with a design that allows the OIL inside to fully drain creating little to no loss.  The system is made of all parts that can be sterilized.  The body, valves and all connections are 304 Stainless Steel and the hosing is PTFE. The body of the vessel is fully jacked and is recommended to be run with stand alone heater to pre-heat the oil.  The hose heated and insulated.  The hose temperature is controlled by an analog PID.  The hose and PID controller are precision made in the USA.  The hose uses Platinum Thermocouples for durability and accuracy, which means you wont run into down time or temperature errors.   To use the system you will need Nitrogen to back pressure the oil in the tank.  The pressure is regulated by a low pressure regulator.  To dispense the end of the hose has a toggle valve that connects to a Lure Lock connection.   System Specs.  Nitrogen Input MAX Pressure: 150PSI Regulator working pressure: 0.5-30PSI (*recommended pressure 10PSI) Hose Temperature Rating: 50°F - 450°F Controller Temperature Range: 50°F -450° Includes Right Angle Attachment for added user flexibility. Non-Metered Dispensing with toggle valve control. Pressure gauge for pressure monitoring: 0-150PSI BVV™ 5 Liter Heated circulator 275°F Max Temperature *Heater and 10Ft of hose is included in the kit.  Ready to Run! BVV 5 Liter Heated Circulator Manual   Cleaning: NOTE: Please Clean Prior to first use the system does not come sterilized.  A simple IPA wash down will be sufficient.  At any point the system can be cleaned using IPA or D-limonene.  Note: The heater should be operated with RO water to avoid scale buildup.  BVV™'s warranty does not protect heating coils that fail due to scale buildup.   

    $3,900.00

  • Vape Cartridge Packaging (Child Resistant 16 CFR 1700 Compliant) Shop All Categories BVV

    Vape Cartridge Packaging (Child Resistant 16 CFR 1700 Compliant)

    Vape Cartridge Packaging (Child Resistant 16 CFR 1700 Compliant) **Does not come with a Cartridge. This blank matte black packaging will hold 0.5ml - 1.0ml carts.  The carts pictured are the BVV™ ceramic tip carts.  The packaging is universal.  BVV™ has tested the fitment with dozens of carts and just about every length and barrel fits nice and snug.    The packaging is child resistant to the latest standards and is fully recyclable. This attractive box is patented which means your box will stand out among the others.  Give your extracts the presentation they deserve by affixing your own label and brand to this executive level box.  The insert comes with all boxes but not installed and is pre-creased so it can easily be folded. Packaging Dimensions Measure: 2-1/4" Wide x 4-3/8" Long x 7/8" Tall *Custom Designs for orders over 5,000 pieces, production lead time 3 weeks from proof.  BVV™ and their payment vendors retain the right to refuse to accept certain transactions if it conflicts with their Terms of Service. Therefore, certain items on the website may not be able to be purchased using certain payment methods (Ex. Amazon Pay) if it is prohibited in that payment method’s Terms of Service. The available payment methods will display at checkout.

    $1.95 - $2.20

  • Replacement Luer-Lok Cart Filler Tips for Vape Cartridge Fillers - 5 Pack Shop Brands BVV

    Replacement Luer-Lok Dosing Tips for Lab Dosing Guns - 5 Pack

    Replacement Luer-Lok Dosing Tips for Lab Dosing Guns - 5 Pack 5 Pack of replacement 14 gauge stainless steel tips for BVV™ Lab Dosing Guns.    

    $9.00

  • Replacement Vape Cartridge Filler Gun Shop Brands BVV

    Lab Dosing Gun

    Lab Dosing Gun 30 Day Limited Warranty This a gun for the BVV™ Semi-Automatic Lab Dosing Gun. It comes bare bones and Includes the following: Lab Dosing Gun Replacement Spring Clip Replacement Gasket 25ml Gun 0.5-2.5ml (0.5ml Increments)  50ml Gun 1-5ml (1ml Increments)  Polypropylene Barrel – Chemically Resistant to: Isopropyl Alcohol, Ethanol, Butane, Hexane, Glycerin, Glycols, Terpenes, and most Acids Lure Lock Hub for all types of size attachments Adjustable plunger tension/tightening (*for user preferred plunger action) NOTE:  Does not come with Syringe Tips Please Clean Prior to first use gun does not come sterilized.  

    $75.00 - $85.00

  • Replacement Gasket for Vape Cartridge Filling Gun

    Replacement Gasket for Lab Dosing Gun

    Replacement Gasket for Lab Dosing Gun 30 Day Limited Warranty This a replacement gasket for the BVV™ Lab Dosing Gun  

  • 1ml Glass Dosing Syringe with Luer Lock New Products BVV

    1ml Glass Dosing Syringe with Luer Lock

    1ml Glass Dosing Syringe with Luer Lock This 1ml high-quality glass syringe has a triple O-ring plunger that allows for smoother dosing and Luer Lock Cap creates an airtight connection to preserve the freshness of concentrates and prevent leakage. The syringe is made from borosilicate glass, which is heat resistant, sturdy, and easy to clean! The silicone tip ensures you are sparing no oil and every last bit is dispensed.

    $2.70 - $250.00

  • Pinch Clamp 1-3/8"-1-1/2" Shop All Categories BVV

    Pinch Clamp 1-3/8"-1-1/2"

    Pinch Clamp 1-3/8"-1-1/2"   Replacement pinch clamp that will secure the cover over the heat pad after disassembling the Lab Dosing Gun:

    $3.00

Login

Forgot your password?

Don't have an account yet?
Create account