BVV Glassware

64 products


  • 10L Solvent Pro Rotary Evaporator Evaporating Flask Shop All Categories BVV

    10L Solvent Pro Rotary Evaporator Evaporating Flask

    Replacement Evaporating flask for 10L solvent pro rotary evaporators.

    $144.00

  • 50L Solvent Pro Rotary Evaporator Bump Trap Unclassified 0

    50L Solvent Pro Rotary Evaporator Bump Trap

    50L Solvent Pro Rotary Evaporator Bump Trap Bump Trap to fit 30-50L Solvent Pro rotary evaporators. Connections: Bottom: 50mm ID 70mm OD Right side: 40mm ID 60mm OD Top/Left side: 17mm ID 35mm OD

    $600.00

  • 30L Glass Axis Shop All Categories BVV

    30L Glass Axis

    30L Glass Axis Oil Filled Vacuum/Pressure Gauge - Bottom Mount   *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    $140.00

  • ECO Replacement 50L Main Condenser (V1) Shop All Categories BVV

    ECO Replacement 50L Main Condenser (V1)

    ECO Replacement 50L Main Condenser (V1)  Replacement main condenser for ECO rotary evaporators made before 2019.  60/80 Lower Flange 40/60 Top Flange 1/2" Barb connections for cooling coil

    $895.00

  • 10L Solvent Pro Series Glass Axis Shop All Categories BVV

    10L Solvent Pro Series Glass Axis

    10L Solvent Pro Series Glass Axis. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.***

    $90.00

  • NRE 5L Main Condenser Unclassified 0

    NRE 5L Main Condenser

    NRE 5L Main Condenser This condenser directly connects to our 5L Neocision ETL Lab Certified Rotary Evaporator (SKU: NRE-5L).  NOTE: Condenser does not come with GL caps and barbs or gaskets.   Specifications Connection Type and Size To Bump Trap Flange ID32/OD50 (mm) To Collection Flask Flange ID22/OD37.5 (mm) Condenser Input/Output GL14 Vacuum GL14

    $370.00

  • Sale -39% VACUUM MANIFOLDS, INERT GAS, AIRFREE®, SCHLENK with Clamps New Products Chemglass

    VACUUM MANIFOLDS, INERT GAS, AIRFREE®, SCHLENK

    Double bank manifold available in 3port configuration. Forward facing 0-8mm Chem-Vac™ Chem-Cap® valves permit easy operation of manifold inside of a fume hood. Main ports are spaced 100mm center to center with an additional 2 ports on the upper bank that can be used for gauging or sealed with AF-0210 stoppers. All connection ports are #15 o-ring joint connections that incorporate a greaseless o-ring seal. Manifold is modular in design allowing the user tremendous flexibility in performing experiments. Adapters from #15 o-ring joints to standard taper components, serrated hose connections or 3/8" Cajon® fittings are available to allow the ports to be used with existing glassware. Replacement Chem-Vac™ Chem-Cap® plug is listed below.

    $1,561.00$950.00

  • Sale -38% Single Neck Cow Recieving FLask 24/40 Joints New Products BVV

    Single Neck Cow Distribution Adapter 24/40 Joints

    This distribution adapter is used in a short path distillation setup to attach to a single receiving flask and to the vacuum system. The two ground joints are 24/40 to fit the distillation head and receiving flask. The vacuum connection is a GL-14 threaded port.

    $160.00$100.00

  • Sale -37% BVV 3 - Neck Decarb Flask Kit Shop All Categories BVV

    2 Liter BVV 3 - Neck Decarb Flask Kit

    BVV 3 - Neck Decarb Flask Kit This 3 neck flask will fit in a 2L heating mantle. The flask can be used under vacuum but is ideal for use as a decarboxylation flask before running a short path setup. The lid has 3x 24/40 tapered glass joints.

    $350.00$220.00

  • Sale -33% 10mm OD Serrrated Hose Barb, #15 O-Ring Joint Shop All Categories 0

    10mm OD Serrrated Hose Barb, #15 O-Ring Joint

     10mm OD Serrrated Hose Barb, #15 O-Ring Joint     Adapters, Airfree, Schlenk, Style "B", 15mm O-Ring Joint to 10mm Serrated Hose Connection   The AF-0070 adapters are to be used with either a Cajon® fitting on the main ports or at the ends of the manifold with heavy wall rubber vacuum tubing. Serrated hose connection adapters list the OD of the hose connection at the middle ring. Each adapter is supplied complete with one #116 Viton o-ring. Adapters are to be attached to the manifold via a CG-150-05 S.S. pinch clamp.

    $30.00$20.00

  • 5L Solvent Pro Rotary Evaporator Receiving Flask Shop All Categories Best Value Vacs

    5L Solvent Pro Rotary Evaporator Receiving Flask

    5L Solvent Pro Rotary Evaporator Receiving Flask This receiving flask will fit on BVV 5L solvent pro rotary evaporators.   Connection Sizes: Condenser- 32mm ID/50mm OD 2x Valves- 16mm ID/35mm OD

    $129.00

  • Chromatography Column Shop All Categories BVV

    Chromatography Column

    Chromatography Column      Chromatography Column This 3”x24” chromatography column features an internal volume of 2.7L. It’s commonly used for removing pesticides, separating components, and cleaning different chemical compounds. Additional consumables or accessories will be needed depending on the application. Capacity can be increased with an additional reservoir adapted to the top 45/50 Rodaviss joint. Rodaviss joints are great for disconnecting any stubborn joints. Light grease is still recommended when assembling joints.  Light grease is still recommended when assembling joints.     Features: Needle control valve 3”x24” column with 2.7L capacity 45/50 Rodaviss joint Sintered disk Stop cock   For additional information or questions regarding this kit, accessories, and consumables contact our customer support line.       *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.  **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    $350.00

  • 10L Solvent Pro Rotary Evaporator Auxiliary Condenser Shop All Categories BVV

    10L Solvent Pro Rotary Evaporator Auxiliary Condenser

    10L Solvent Pro Rotary Evaporator Auxiliary Condenser Replacement Auxiliary Condenser for 10L Solvent Pro Rotary Evaporator 

    $284.00

  • 20L Solvent Pro Rotary Evaporator Auxiliary Condenser Shop All Categories BVV

    20L Solvent Pro Rotary Evaporator Auxiliary Condenser

    20L Solvent Pro Rotary Evaporator Auxiliary Condenser   Replacement Auxiliary Condenser for 20L Solvent Pro Rotary Evaporator 

    $360.00

  • 10L Glass Axis Shop All Categories BVV

    10L Glass Axis

    10L Replacement Glass Axis for rotary evaporators.

    $100.00

  • P10 BVV Distillation Head - USA Made Shop All Categories BVV

    P10 BVV™ Distillation Head - USA Made

    P10 BVV™ Distillation Head P10 Distillation Head has 2 sets of vigreux in the distillation column with 45/50 lower joint, 24/40 Thermometer Joint, and 34/45 side joint and includes GL-14 barb connections. MADE IN THE USA Designed for 10 Liter Flasks Set of 2 vigreux to allow for more packing media Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media Increased condenser length and diameter for more efficient condensation of vapor with zero clogging *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.  **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    $700.00

You have seen 64 out of 64 products

Login

Forgot your password?

Don't have an account yet?
Create account