Vacuum Hose and Accessories

32 products


  • Best Value Vacs 5' HVAC Hose Shop All Categories BVV

    Best Value Vacs 5' HVAC Hose

    HVAC Vacuum Pump Hose with Swivel Fittings This Best Value Vacs 5' HVAC Hose has 1/4" swivel fittings on each end. HVAC hoses are built for long life and dependability. A strong, six-sided crimp provides a reliable connection between the hose and barb. The maximum working pressure of these hoses is 500psi with an ultimate burst pressure at 2500psi.

    $12.00 - $14.00

  • 1/4" Reinforced Clear PVC Vacuum Hose Shop All Categories Kuri Tec 5 Feet

    1/4" ID Heavy Wall Spiral Wire Reinforced Clear PVC Vacuum Hose

    1/4" Reinforced Clear PVC Vacuum Hose Crystal clear Phthalate Free PVC compound, formulated with ingredients in compliance with applicable FDA(03) requirements, meets USDA(18), 3A(01), NSF(13) and RoHS(16) criteria. This hose is reinforced with helically-wound spring steel wire to prevent it from collapsing under a vacuum and prevent kinking or deformation of the tubing. Key Features: Vacuum Rated to 29.9" HG @ 70°F Spiral wire reinforcement prevents kinking or collapsing and prevent expansion under higher pressure applications Crystal clear tubing allows visual confirmation of product flow Glass smooth interior prevents build-up of material inside the tubing Electrogalvanized helical steel wire can be used for static dissipation. (This product is designed to dissipate static electricity when the metal wire is properly connected to ground through the fitting or other means Resistant to wide range of chemicals Self extinguishing Non-marking Silicone Free One-piece lengths Phthalate Free! Common Applications: Full Vacuum Lines Industrial Vacuum Pumps Food and beverage dispensing Air and water supply lines Pneumatic parts transfer Car wash applications Coolant lines Air breathing lines Deionized water systems Specifications Series K1760 Sized Code 04 Service Temperature Range 25 to 150°F (-4 to 65°C) Nominal ID 1/4" (6.4mm) Nominal OD 0.460" (11.7mm) Max Working Pressure @ 70°F (20°C) 150 Psi Max Working Pressure @ 122°F (50°C) 70 Psi Standard Length Coils 100ft Approx. Wt. per Pkg. 7.0lb Brand Kuri Tec® Packaging Coils Material NSF-51 Applications / Materials Conveyed Air and Water supply lines Air breathing lines Car Wash Applications Coolant Lines Deionized Water Systems Food & Beverage dispensing Full Vacuum Lines Industrial Vacuum Lines Pneumatic Parts Transfer Min. Bend Radius @ 70°F 1" Type Reinforced Water Supply and Food Grade Hose Style Standard Wall PVC Food and Beverage Vacuum/Transfer Hose Inside Tube Material Crystal Clear Phthalate Free PVC Compound Cover Material Crystal Clear Phthalate Free PVC Compound Reinforcement Material Helically-wound spring steel wire Color Crystal Clear Medium Temperature(Min) 25°F (-4°C) Medium Temperature(Max) 150°F (65°C) Weight per Foot 0.07lbs/ft Performance Clear PVC wire reinforced for vacuum; Kink Resistant

    $10.00 - $100.00

  • KF Vacuum Flange Reducer Adapter Shop All Categories BVV KF16 x KF25

    KF Vacuum Flange Reducer Adapter

    This 304 Stainless Steel KF Vacuum Flange Reducer / Adapter is designed to convert K16 to KF25 or KF25 to K40 and vise versa.

  • KF-50 Braided Stainless Steel Bellow Hose New Products BVV

    KF Connection Braided Stainless Steel Bellow Hose

    KF Connection Braided Stainless Steel Bellow Hose This KF or (NW) bellow hose is made out of 304-grade stainless steel with braided exterior which allows a high vacuum to be obtained with a large flow diameter for vapors. These bellow hoses are flexible and allow the user to connect a KF flanged vacuum pump to a KF flanged vacuum oven or any other application using adapters. Sizes Available: KF-16 KF-40 KF-50 Lengths Available: 20" 40"  

    $82.00 - $165.00

  • KF-25 Tee Shop All Categories BVV

    KF-25 Tee

    This is a KF-25 Flanged Tee for High Vacuum Applications. The Material is 304SS and it has a maximum vacuum rating of 10^-7 torr @ 72F.   KF-25 Clamp and O-ring are sold Seperately.  

    $45.00

  • KF-25 Y Bellow Shop All Categories BVV

    KF-25 Y Bellow

    This Unique 304 Stainless Steel KF-25 Y Bellow has 3 attachment points for KF-25 fittings and 2 flexible ends and 1 rigid end that let the user position them the way that best suits their operation. It has an overall length of 17" and a width of ~16".

    $210.00

  • KF-25 Cross Shop All Categories BVV

    KF-25 Cross - 4 Way Splitting of Vacuum Applications

    This is a KF-25 Cross for 4 Way splitting of Vacuum Applications especially vacuum ovens connected to a single Vacuum Pump in an array. The material is 304 Stainless Steel with a 10^-7 torr @ 72F Vacuum Rating. Does not include KF-25 Clamp or O-ring these items are sold separately.

    $56.00

  • KF-25 5 Way Manifold Shop All Categories BVV

    KF-25 5 Way Manifold

    This is a KF-25 5 Way manifold for the splitting of vacuum applications especially vacuum ovens connected to a single Vacuum Pump in an array. The material is 304 Stainless Steel with a 10^-7 torr @ 72F Vacuum Rating. (Note: Does not include KF-25 Clamp or O-ring these items are sold separately.)

    $55.00

  • Stainless Steel 1/4" Hose Barb x 1/4" 37° Flare Shop All Categories BVV

    Stainless Steel 1/4" Hose Barb x 1/4" 37 Degree Flare

    Stainless Steel 1/4" Hose Barb x 1/4" 37° Flare

    $6.00

  • Vacuum Pump 1/4" Barb x 1/4" Flare Adapter Shop All Categories BVV

    Vacuum Pump 1/4" Barb x 1/4" Flare Adapter

    Vacuum Pump 1/4" Barb x 1/4" Flare Adapter A Vacuum Pump to Barbed Flare adapter is designed to convert any standard 1/4" Flared vacuum pump to a barbed fitting to be used with flexible 1/4" Tubing for Vacuum. The material is nickel plated brass.   NOTE: This is a two piece item including the barb and nut to attach to 1/4" JIC JIC Union is not included and needs to be purchased separately

    $6.00

  • Brass Hose Barb x MNPT Shop All Categories BVV

    Brass Hose Barb x MNPT

    Brass Hose Barb x Male NPT Threaded Connection. This fitting adapts from Male NPT to Hose Barb Fitting for use with tubing for flow. **NOTE: Pre-Taped option comes from BVV Pre-taped with Yellow UL Listed Gas PTFE Tape on the Male NPT threads ONLY for a +0.50c charge per male npt end. (JIC Threads and Barbs DO NOT need to be taped.) Sizes Available: 1/4" Barb x 1/4" MNPT 3/8" Barb x 1/4" MNPT 1/2" Barb x 1/4" MNPT 3/8" Barb x 3/8" MNPT 3/8" Barb x 3/8" MNPT 1/4" Barb x 1/2" MNPT 3/8" Barb x 1/2" MNPT 1/2" Barb x 1/2" MNPT  

    $1.00 - $1.75

  • Brass 1/4" NPT Female to 1/4" Barb Fitting Shop All Categories BVV

    Brass 1/4" NPT Female to 1/4" Barb Fitting

    Brass 1/4" NPT Female to 1/4" Barb Fitting allows the user to adapt a male NPT thread to a 1/4" Hose barb for flexible tubing.  Note: This connection requires PTFE tape on the threaded side to create a leak free seal.

    $0.95

  • 1/4" Stainless Steel Hose Barb Union Shop All Categories BVV

    1/4" Stainless Steel Hose Barb Union

    1/4" 304 Stainless Steel Hose Barb Union

    $3.50

  • 3/8" Gum Rubber Tubing for Vacuum Shop All Categories BVV 5 Feet

    3/8" Gum Rubber Tubing for Vacuum

    3/8" Gum Rubber Tubing Pure gum rubber tubing is ideal for vacuum applications and will not collapse under a vacuum like other soft/low durometer tubing on the market. Please refer to this chemical compatibility chart: Cole-Parmer Chemical Compatibility - Natural Rubber Key Features: Tear Resistant Retains Memory Safely conducts many acids, chemicals, and gases Resistant to cold and hot temperature variations Very versatile Flexible and soft Developed especially for mechanical vacuum pumps Specifications Hardness Rating Soft Hardness Durometer 45A Material Gum Rubber ID 3/8" OD 7/8" Wall Thickness 1/4" Flexibility Very Flexible Temperature Range -70° to 180°F Maximum Vacuum 29 in. of Hg @ 72°F Compatible Tube Fittings Barbed Connections Color Beige

    $67.00 - $670.00

  • 1/4" Gum Rubber Tubing for Vacuum Shop All Categories BVV 5 Feet

    1/4" Gum Rubber Tubing for Vacuum

    1/4" Gum Rubber Tubing Pure gum rubber tubing is tear-resistant, ideal for vacuum applications and will not collapse under a vacuum-like other soft/low durometer tubing on the market. Please refer to this chemical compatibility chart: Cole-Parmer Chemical Compatibility - Natural Rubber Key Features: Tear Resistant Retains Memory Safely conducts many acids, chemicals, and gases Resistant to cold and hot temperature variations Very versatile Flexible and soft Developed especially for mechanical vacuum pumps Specifications Hardness Rating Soft Hardness Durometer 45A Material Gum Rubber ID 1/4" OD 3/4" Wall Thickness 1/4" Flexibility Very Flexible Temperature Range -70° to 180°F Maximum Vacuum 29 in. of Hg @ 72°F Compatible Tube Fittings Barbed Connections Color Beige

    $46.00 - $390.00

  • 1/2" Gum Rubber Tubing for Vacuum Shop All Categories BVV 5 Feet

    1/2" Gum Rubber Tubing for Vacuum

    1/2" Gum Rubber Tubing Pure gum rubber tubing is ideal for vacuum applications and will not collapse under a vacuum like other soft/low durometer tubing on the market. Please refer to this chemical compatibility chart: Cole-Parmer Chemical Compatibility - Natural Rubber Key Features: Tear Resistant Retains Memory Safely conducts many acids, chemicals, and gases Resistant to cold and hot temperature variations Very versatile Flexible and soft Developed especially for mechanical vacuum pumps Specifications Hardness Rating Soft Hardness Durometer 45A Material Gum Rubber ID 1/2" OD 1-1/8" Wall Thickness 5/16" Flexibility Very Flexible Temperature Range -70° to 180°F Maximum Vacuum 29 in. of Hg @ 72°F Compatible Tube Fittings Barbed Connections Color Beige

    $70.00 - $650.00

  • 1/4" X 1/4" Male Polypropylene Check Valve Shop All Categories BVV

    1/4" X 1/4" Male Polypropylene Check Valve

    1/4" Male Polypropylene Check Valve

    $4.00

  • Tygon 2475 Smooth Bore High Purity PVC Tubing - 3/8" Shop All Categories Tygon 5 Feet

    Tygon 2475 Smooth Bore High Purity PVC Tubing - 3/8"

    3/8" Tygon 2475 Smooth Bore High Purity PVC Tubing Formulation 2475 Tygon tubing is the ultimate in performance PVC tubing this tubing is free of plasticizers, made of FDA listed materials, rated for vacuum, and has a minimum temperature range of -90°F all the way up to 120°F. This tubing is meant for sensitive transfer fluids, pharmaceutical solutions, biotechnological applications because of its high performance and smooth bore. Formulation 2475 also resistance damage from aggressive chemical cleaners and sanitizers and contains no plasticizers which could contaminate the transferred fluids. The smooth non-wetting inner bore prevents the build-up of particulates and limits absorption and adsorption to further preserve fluid purity and integrity. When burned for disposal this tubing will not release any hazardous byproducts such as chlorine and will only release carbon dioxide and water for a less toxic means of disposal it can also be sterilized with ethylene oxide (ETO), chemicals, or radiation. The tubing has a working temperature of -90 to 120°F and a durometer of 70a and a pressure rating of 20 psi at 72F. this tubing meets U.S. Pharmacopoeia (USP) Class VI criteria for medical grade plastic materials and U.S. Food and Drug Administration (FDA) 21 CFR 177.1520 criteria for food contact for quality assurance. Tygon 2475 Brochure Key Features: Plasticizer-free plastic tubing for transferring fluids in medical, pharmaceutical, and biotechnological applications Clear Tygon formulation 2475 plastic for visually monitoring transfer of fluids Smooth bore to allow full drainage and prevent absorption and particulate build-up for preserving fluid integrity Working temperature range of -90 to 120°F and durometer (hardness) of 70A Meets USP Class VI and FDA CFR21 177.1520 standards for quality assurance Vacuum Rated to 25inHG Specifications ID 3/8" OD 1/2" Wall Thickness 1/16" Temperature Rating -90° to 120°F Vacuum Rating 25 in. of HG @ 72°F Durometer 70A Hardness Rating Soft Flexibility Very Flexible Bend Radius 1-3/4" Maximum Pressure 20psi @ 72°F Compatible Tube Fittings Barbed Formulation 2475 Standards Meets USP Class VI FDA CFR21 177.1520 standards for quality assurance Chemical Resistance: Excellent Acetic Acid (10% in Water) Acetic Acid (30% in Water) Deionized Water Hydrochloric Acid (10% in Water) Hydrochloric Acid (30% in Water) Hydrogen Peroxide (10% in Water) Hydrogen Peroxide (30% in Water) Isopropyl Alcohol Methanol (Methyl Alcohol) Nitric Acid (Up to 50% Concentration) Phosphoric Acid (25% in Water) Phosphoric Acid (85% in Water) Sodium Hydroxide (Caustic Soda) (10% in Water) Sodium Hydroxide (Caustic Soda) (30% in Water) Sodium Hypochlorite (Bleach) Sulfuric Acid (10% in Water) Sulfuric Acid (30% in Water) Moderate Acetone, Methyl Ethyl Ketone (MEK) Vegetable Oil Not Recommended Mineral Oil Note Chemical compatibility must be determined by the customer based on the conditions in which the product is being used, including the presence of other chemicals, temperature, and consistency. Safety Data SDS RoHS Compliant

    $20.00 - $200.00

  • Tygon 2475 Smooth Bore High Purity PVC Tubing - 1/4" Shop All Categories Tygon 5 Feet

    Tygon 2475 Smooth Bore High Purity PVC Tubing - 1/4"

    1/4" Tygon 2475 Smooth Bore High Purity PVC Tubing Formulation 2475 Tygon tubing is the ultimate in performance PVC tubing this tubing is free of plasticizers, made of FDA listed materials, rated for vacuum, and has a minimum temperature range of -90°F all the way up to 120°F. This tubing is meant for sensitive transfer fluids, pharmaceutical solutions, biotechnological applications because of its high performance and smooth bore. Formulation 2475 also resistance damage from aggressive chemical cleaners and sanitizers and contains no plasticizers which could contaminate the transferred fluids. The smooth non-wetting inner bore prevents the build-up of particulates and limits absorption and adsorption to further preserve fluid purity and integrity. When burned for disposal this tubing will not release any hazardous byproducts such as chlorine and will only release carbon dioxide and water for a less toxic means of disposal it can also be sterilized with ethylene oxide (ETO), chemicals, or radiation. The tubing has a working temperature of -90 to 120°F and a durometer of 70a and a pressure rating of 30 psi at 72F. this tubing meets U.S. Pharmacopoeia (USP) Class VI criteria for medical grade plastic materials and U.S. Food and Drug Administration (FDA) 21 CFR 177.1520 criteria for food contact for quality assurance. Tygon 2475 Brochure Key Features: Plasticizer-free plastic tubing for transferring fluids in medical, pharmaceutical, and biotechnological applications Clear Tygon formulation 2475 plastic for visually monitoring transfer of fluids Smooth bore to allow full drainage and prevent absorption and particulate build-up for preserving fluid integrity Working temperature range of -90 to 120°F and durometer (hardness) of 70A Meets USP Class VI and FDA CFR21 177.1520 standards for quality assurance Vacuum Rated to 29inHG Specifications ID 1/4" OD 3/8" Wall Thickness 1/16" Temperature Rating -90° to 120°F Vacuum Rating 29 in. of HG @ 72°F Durometer 70A Hardness Rating Soft Flexibility Very Flexible Bend Radius 3/4" Maximum Pressure 30psi @ 72°F Compatible Tube Fittings Barbed Formulation 2475 Standards Meets USP Class VI FDA CFR21 177.1520 standards for quality assurance Chemical Resistance: Excellent Acetic Acid (10% in Water) Acetic Acid (30% in Water) Deionized Water Hydrochloric Acid (10% in Water) Hydrochloric Acid (30% in Water) Hydrogen Peroxide (10% in Water) Hydrogen Peroxide (30% in Water) Isopropyl Alcohol Methanol (Methyl Alcohol) Nitric Acid (Up to 50% Concentration) Phosphoric Acid (25% in Water) Phosphoric Acid (85% in Water) Sodium Hydroxide (Caustic Soda) (10% in Water) Sodium Hydroxide (Caustic Soda) (30% in Water) Sodium Hypochlorite (Bleach) Sulfuric Acid (10% in Water) Sulfuric Acid (30% in Water) Moderate Acetone, Methyl Ethyl Ketone (MEK) Vegetable Oil Not Recommended Mineral Oil Note Chemical compatibility must be determined by the customer based on the conditions in which the product is being used, including the presence of other chemicals, temperature, and consistency. Safety Data SDS RoHS Compliant

    $17.00 - $181.00

  • Tygon 2475 Smooth Bore High Purity PVC Tubing - 1/2" Shop All Categories Tygon 5 Feet

    Tygon 2475 Smooth Bore High Purity PVC Tubing - 1/2"

    1/2" Tygon 2475 Smooth Bore High Purity PVC Tubing Formulation 2475 Tygon tubing is the ultimate in performance PVC tubing this tubing is free of plasticizers, made of FDA listed materials, rated for vacuum, and has a minimum temperature range of -90°F all the way up to 120°F. This tubing is meant for sensitive transfer fluids, pharmaceutical solutions, biotechnological applications because of its high performance and smooth bore. Formulation 2475 also resistance damage from aggressive chemical cleaners and sanitizers and contains no plasticizers which could contaminate the transferred fluids. The smooth non-wetting inner bore prevents the build-up of particulates and limits absorption and adsorption to further preserve fluid purity and integrity. When burned for disposal this tubing will not release any hazardous byproducts such as chlorine and will only release carbon dioxide and water for a less toxic means of disposal it can also be sterilized with ethylene oxide (ETO), chemicals, or radiation. The tubing has a working temperature of -90 to 120°F and a durometer of 70a and a pressure rating of 29.9 psi at 72F. this tubing meets U.S. Pharmacopoeia (USP) Class VI criteria for medical grade plastic materials and U.S. Food and Drug Administration (FDA) 21 CFR 177.1520 criteria for food contact for quality assurance. Tygon 2475 Brochure Key Features: Plasticizer-free plastic tubing for transferring fluids in medical, pharmaceutical, and biotechnological applications Clear Tygon formulation 2475 plastic for visually monitoring transfer of fluids Smooth bore to allow full drainage and prevent absorption and particulate build-up for preserving fluid integrity Working temperature range of -90 to 120°F and durometer (hardness) of 70A Meets USP Class VI and FDA CFR21 177.1520 standards for quality assurance Vacuum Rated to 29.9inHG Specifications ID 1/2" OD 3/4" Wall Thickness 1/8" Temperature Rating -90° to 120°F Vacuum Rating 29 in. of HG @ 72°F Durometer 70A Hardness Rating Soft Flexibility Very Flexible Bend Radius 1-1/2" Maximum Pressure 29psi @ 72°F Compatible Tube Fittings Barbed Formulation 2475 Standards Meets USP Class VI FDA CFR21 177.1520 standards for quality assurance Chemical Resistance: Excellent Acetic Acid (10% in Water) Acetic Acid (30% in Water) Deionized Water Hydrochloric Acid (10% in Water) Hydrochloric Acid (30% in Water) Hydrogen Peroxide (10% in Water) Hydrogen Peroxide (30% in Water) Isopropyl Alcohol Methanol (Methyl Alcohol) Nitric Acid (Up to 50% Concentration) Phosphoric Acid (25% in Water) Phosphoric Acid (85% in Water) Sodium Hydroxide (Caustic Soda) (10% in Water) Sodium Hydroxide (Caustic Soda) (30% in Water) Sodium Hypochlorite (Bleach) Sulfuric Acid (10% in Water) Sulfuric Acid (30% in Water) Moderate Acetone, Methyl Ethyl Ketone (MEK) Vegetable Oil Not Recommended Mineral Oil Note Chemical compatibility must be determined by the customer based on the conditions in which the product is being used, including the presence of other chemicals, temperature, and consistency. Safety Data SDS RoHS Compliant

    $45.00 - $450.00

  • 1" ID Heavy Wall Spiral Wire Reinforced Clear PVC Vacuum Hose Shop All Categories BVV

    1" ID Heavy Wall Spiral Wire Reinforced Clear PVC Vacuum Hose

    1" ID Heavy Wall Spiral Wire Reinforced Clear PVC Vacuum Hose Crystal clear Phthalate Free PVC compound, formulated with ingredients in compliance with applicable FDA requirements, meets USDA, 3A, NSF, UL, RoHS and USP Class VI criteria. Reinforced with spiraled polyester yarn and longitudinal orange tracer yarns for identification. Key Features: Constructed with Phthalate Free compounds. NSF-51 certified material. Crystal clear - allows visual confirmation of product flow. Longitudinally reinforced to reduce elongation under pressure. Light weight. Self-extinguishing. Non-marking. Silicone-free. Non-conductive. One-piece lengths. Resistant to chemicals (see chemical-resistance chart). Compound hardness 73 ±3 Shore "A". Phthalate Free! Common Applications: Food & beverage dispensing. Deionized water. Liquid food products. Air and water lines. Powdered food products. Potable water transfer. Air breathing lines. Pneumatic lines. Packaging machines. Specifications Series K7130 Sized Code 16 Service Temperature Range 25 to 150°F (-4 to 65°C) Nominal ID 1" (25.4mm) Nominal OD 1.375" (34.9mm) Max Working Pressure @ 70°F (20°C) 100 Psi Max Working Pressure @ 122°F (50°C) 50 Psi Standard Length Coils 100ft Approx. Wt. per Pkg. 44lb Brand Kuri Tec® Packaging Coils Material PVC Min. Bend Radius @ 70°F 1" Type Reinforced Water Supply and Food Grade Hose Reinforcement Material Helically-wound spring steel wire Color Crystal Clear Weight per Foot 0.44lbs/ft Performance Heavy Wall Clear PVC wire reinforced for vacuum

    $40.00 - $400.00

  • Texcel 1.5" Tri-Clamp FDA Grade Growler Hose -40 to 248°F New Products BVV

    Texcel 1.5" Tri-Clamp FDA Grade Growler Hose -40 to 248°F

    Texcel 1.5" Tri-Clamp FDA Grade Growler Hose -40 to 248°F GROWLER™ brewery hose is a heavy-duty hose formulated for the suction and delivery of beer, wine, alcohol, and soft drinks. The GROWLER™ hose has a white, smooth BIIR (butyl) rubber tube to ensure food quality and is odorless and does not alter taste. Its high working temperature allows for the sterilization of the hose with steam at 230°F for 30 minutes. Meets FDA title 21 part.177.2600(e) for liquid foods, BfR, ADI free, EC 1935 / 2004.Key Features and Specifications: Vacuum Rated to 29" HG White smooth BIIR (butyl) inner ruber tube High working temperature for Steam Sterilization FDA, USDA compliant Grade title 21 part.177.2600(e) for liquid foods, BfR, ADI Free, ec 1935 / 2004 High strength synthetic plies with steel wire spirals ID: 1-1/2" OD: 1-31/31" Working Pressure: 150 psi Bend Radius: 4" Lbs./Ft.: 0.97 End Connections: 1.5" Tri-Clamp

    $315.00 - $435.00

  • 1/4" ID 3/8" OD Clear PVC Tubing New Products BVV

    1/4" ID 3/8" OD Clear PVC Tubing

    1/4" ID 3/8" OD Clear PVC Tubing Features: High gloss crystal clear appearance with glass smooth interior to reduce sediment buildup Blue tint to enhance clarity NSF-51 certified material Self-extinguishing Compound hardness 73 ±3 Shore "A" Phthalate Free! Applications: Tubing for laboratories Water distillation lines Deionized water systems Air conditioning drainage Refrigeration drainage Air lines Bottling plants Beverage dispensing units Ice making machines Printing press equipment High efficiency furnace drainage Transfer of weak chemicals and acids Temperature Range: 25 ºF (-4 ºC) to 150 ºF (65 ºC) Specifications: Nominal ID: 1/4 in6.4 mm Nominal OD: 3/8 in9.5 mm Nominal Wall: 1/16 in1.6 mm Working Pressure @ 70F: 55 psi  

    $5.00 - $40.00

  • 3/8" Compression Tube Stub Stainless Steel Hose New Products USA Lab

    3/8" Compression Tube Stub Stainless Steel Hose

    3/8" Compression Tube Stub Stainless Steel Hose   Our Male Compression Tube Stub Hosing is made of high-quality materials that are built to last. This hosing is lined with a Teflon coating and wrapped in braded steel. These Hoses DO NOT require Teflon tape to create a seal and they should always be tightened and untightened using 2 wrenches.

    $47.00 - $106.00

  • 1/2" Compression Tube Stub Stainless Steel Hose New Products USA Lab

    1/2" Compression Tube Stub Stainless Steel Hose

    1/2" Compression Tube Stub Stainless Steel Hose Our Male Compression Tube Stub Hosing is made of high-quality materials that are built to last. This hosing is lined with a Teflon coating and wrapped in braded steel. Don't cheap out when it comes to hosing. These Hoses DO NOT require Teflon tape to create a seal and they should always be tightened and untightened using 2 wrenches.       Specifications Connection Male Tube Stub Liner Material PTFE (Teflon) Braid Material 304 Stainless Steel Swivel Material 304 Stainless Steel Temperature Rating -65°F (-54°C) to 450°F (230°C) Pressure Rating 1000 PSI Chemical Resistance Excellent Max Bend Radius 2"

    $59.00 - $149.00

  • 1/4" Compression Tube Stub Stainless Steel Hose New Products USA Lab

    1/4" Compression Tube Stub Stainless Steel Hose

    1/4" Compression Tube Stub Stainless Steel Hose   Our Male Compression Tube Stub Hosing is made of high-quality materials that are built to last. This hosing is lined with a Teflon coating and wrapped in braded steel. Don't cheap out when it comes to hosing. These Hoses DO NOT require Teflon tape to create a seal and they should always be tightened and untightened using 2 wrenches.   Specifications Connection Male Tube Stub Liner Material PTFE (Teflon) Braid Material 304 Stainless Steel Swivel Material 304 Stainless Steel Temperature Rating -65°F (-54°C) to 450°F (230°C) Pressure Rating 1000 PSI Chemical Resistance Excellent Max Bend Radius 2"

    $37.00 - $82.00

  • 1/4" Stainless Steel Brass Hose Barb Union Shop All Categories BVV

    1/4" Brass Hose Barb Union

    1/4" Brass Hose Barb Union    This union will connect two 1/4" ID hoses.

    $1.50

  • 1/4" Insulon Vacuum Jacketed Hose, Low Pressure New Products BVV

    1/4" Insulon Vacuum Jacketed Hose, Low Pressure

    1/4" Insulon Vacuum Jacketed Hose, Low Pressure   Due to vendor policies, any of these Insulon Vacuum Jacketed Hoses are final sale, non-returnable, and non-refundable.   Technical Specifications:   Hose Size 1/4" ID DN (ISO 10380) 6 Product Category LP (Low Pressure) Inner Hose ID 0.236” Tube Stub OD 0.250” Tube Stub Thickness 0.035” Outer Hose OD 1.05” Static Bend Radius 2.65” Dynamic Bend Radius 8.86” Lengths 2 – 20’ Operating Temperature -270°C to 900°C (-454°F to 1652°F) Material 316L stainless steel       Maximum Allowable Working Pressure (MAWP) by Temperature: Product Category Hose Size Max Temperature (C) Max Temperature (F) MAWP (PSI) Low Pressure (LP) 1/4" ID 21 70 72 Low Pressure (LP) 1/4" ID 66 150 67 Low Pressure (LP) 1/4" ID 93 200 64 Low Pressure (LP) 1/4" ID 121 250 62 Low Pressure (LP) 1/4" ID 149 300 60 Low Pressure (LP) 1/4" ID 166 330 58 Low Pressure (LP) 1/4" ID 204 400 56 Low Pressure (LP) 1/4" ID 232 450 56 Low Pressure (LP) 1/4" ID 260 500 55 Low Pressure (LP) 1/4" ID 316 600 55 Low Pressure (LP) 1/4" ID 371 700 55 Low Pressure (LP) 1/4" ID 427 800 54 Low Pressure (LP) 1/4" ID 482 900 53 Low Pressure (LP) 1/4" ID 538 1000 53 Low Pressure (LP) 1/4" ID 593 1100 48 Low Pressure (LP) 1/4" ID 649 1200 44 Low Pressure (LP) 1/4" ID 704 1300 40 Low Pressure (LP) 1/4" ID 760 1400 35 Low Pressure (LP) 1/4" ID 816 1500 28 Low Pressure (LP) 1/4" ID 899 1650 18

    $240.00 - $1,008.00

  • 1/2" Insulon Vacuum Jacketed Hose, Low Pressure New Products BVV

    1/2" Insulon Vacuum Jacketed Hose, Low Pressure

    1/2" Insulon Vacuum Jacketed Hose, Low Pressure       Technical Specifications: Hose Size 1/2” ID DN (ISO 10380) 12 Product Category LP (Low Pressure) Inner Hose ID 0.472” Tube Stub OD 0.500” Tube Stub Thickness 0.035” Outer Hose OD 1.27” Static Bend Radius 3.33” Dynamic Bend Radius 10.24” Lengths 2 – 20’ Operating Temperature -270°C to 900°C (-454°F to 1652°F) Material 316L stainless steel       Maximum Allowable Working Pressure (MAWP) by Temperature: Product Category Hose Size Max Temperature (C) Max Temperature (F) MAWP (PSI) Low Pressure (LP) 1/2" ID 21 70 72 Low Pressure (LP) 1/2" ID 66 150 67 Low Pressure (LP) 1/2" ID 93 200 64 Low Pressure (LP) 1/2" ID 121 250 62 Low Pressure (LP) 1/2" ID 149 300 60 Low Pressure (LP) 1/2" ID 166 330 58 Low Pressure (LP) 1/2" ID 204 400 56 Low Pressure (LP) 1/2" ID 232 450 56 Low Pressure (LP) 1/2" ID 260 500 55 Low Pressure (LP) 1/2" ID 316 600 55 Low Pressure (LP) 1/2" ID 371 700 55 Low Pressure (LP) 1/2" ID 427 800 54 Low Pressure (LP) 1/2" ID 482 900 53 Low Pressure (LP) 1/2" ID 538 1000 53 Low Pressure (LP) 1/2" ID 593 1100 48 Low Pressure (LP) 1/2" ID 649 1200 44 Low Pressure (LP) 1/2" ID 704 1300 40 Low Pressure (LP) 1/2" ID 760 1400 35 Low Pressure (LP) 1/2" ID 816 1500 28 Low Pressure (LP) 1/2" ID 899 1650 18

    $260.00 - $1,172.00

  • 3/4" Insulon Vacuum Jacketed Hose, Low Pressure New Products BVV

    3/4" Insulon Vacuum Jacketed Hose, Low Pressure

    3/4" Insulon Vacuum Jacketed Hose, Low Pressure       Technical Specifications: Hose Size 3/4” ID DN (ISO 10380) 20 Product Category LP (Low Pressure) Inner Hose ID 0.787” Tube Stub OD 0.750” Tube Stub Thickness 0.049” Outer Hose OD 1.62” Static Bend Radius 4.1” Dynamic Bend Radius 11.81” Lengths 2 – 20’ Operating Temperature -270°C to 900°C (-454°F to 1652°F) Material 316L stainless steel     Maximum Allowable Working Pressure (MAWP) by Temperature: Product Category Hose Size Max Temperature (C) Max Temperature (F) MAWP (PSI) Low Pressure (LP) 3/4" ID 21 70 43 Low Pressure (LP) 3/4" ID 66 150 40 Low Pressure (LP) 3/4" ID 93 200 38 Low Pressure (LP) 3/4" ID 121 250 37 Low Pressure (LP) 3/4" ID 149 300 36 Low Pressure (LP) 3/4" ID 166 330 35 Low Pressure (LP) 3/4" ID 204 400 34 Low Pressure (LP) 3/4" ID 232 450 34 Low Pressure (LP) 3/4" ID 260 500 33 Low Pressure (LP) 3/4" ID 316 600 33 Low Pressure (LP) 3/4" ID 371 700 33 Low Pressure (LP) 3/4" ID 427 800 32 Low Pressure (LP) 3/4" ID 482 900 32 Low Pressure (LP) 3/4" ID 538 1000 31 Low Pressure (LP) 3/4" ID 593 1100 29 Low Pressure (LP) 3/4" ID 649 1200 26 Low Pressure (LP) 3/4" ID 704 1300 24 Low Pressure (LP) 3/4" ID 760 1400 21 Low Pressure (LP) 3/4" ID 816 1500 17 Low Pressure (LP) 3/4" ID 899 1650 11

    $289.00 - $1,375.00

  • 1" Insulon Vacuum Jacketed Hose, Low Pressure New Products BVV

    1" Insulon Vacuum Jacketed Hose, Low Pressure

    1" Insulon Vacuum Jacketed Hose, Low Pressure     Technical Specifications: Hose Size 1” ID DN (ISO 10380) 25 Product Category LP (Low Pressure) Inner Hose ID 0.984” Tube Stub OD 1.000” Tube Stub Thickness 0.065” Outer Hose OD 1.95” Static Bend Radius 5.08” Dynamic Bend Radius 13.39” Lengths 2 – 20’ Operating Temperature -270°C to 900°C (-454°F to 1652°F) Material 316L stainless steel    Maximum Allowable Working Pressure (MAWP) by Temperature: Product Category Hose Size Max Temperature (C) Max Temperature (F) MAWP (PSI) Low Pressure (LP) 1" ID 21 70 43 Low Pressure (LP) 1" ID 66 150 40 Low Pressure (LP) 1" ID 93 200 38 Low Pressure (LP) 1" ID 121 250 37 Low Pressure (LP) 1" ID 149 300 36 Low Pressure (LP) 1" ID 166 330 35 Low Pressure (LP) 1" ID 204 400 34 Low Pressure (LP) 1" ID 232 450 34 Low Pressure (LP) 1" ID 260 500 33 Low Pressure (LP) 1" ID 316 600 33 Low Pressure (LP) 1" ID 371 700 33 Low Pressure (LP) 1" ID 427 800 32 Low Pressure (LP) 1" ID 482 900 32 Low Pressure (LP) 1" ID 538 1000 31 Low Pressure (LP) 1" ID 593 1100 29 Low Pressure (LP) 1" ID 649 1200 26 Low Pressure (LP) 1" ID 704 1300 24 Low Pressure (LP) 1" ID 760 1400 21 Low Pressure (LP) 1" ID 816 1500 17 Low Pressure (LP) 1" ID 899 1650 11

    $311.00 - $1,559.00

  • 3/8" Insulon Vacuum Jacketed Hose, Low Pressure

    3/8" Insulon Vacuum Jacketed Hose, Low Pressure

    3/8 Insulin Vaccum Jacketed Hose, Low Pressure   nsulon vacuum jacketed hoses for cryogenic and high temperature applications from -270 to 900°C (-454 to 1652°F). High-performance thermal insulation helps fluid transfer systems improve efficiency, safety, and performance. Insulon Hose LP is engineered for low-pressure applications. Insulon Hose LP, 3/8″ ID has a maximum allowable working pressure of 72 psi (4.96 bar) at 23°C. Lengths from 2 to 66 feet.

    $249.00 - $1,056.00

BVV carries a variety of vacuum hose accessories. Shop for a vacuum hose extension, rubber tubing, bellow hose, splitting accessories, vacuum hose adapters, and more.

Login

Forgot your password?

Don't have an account yet?
Create account