New Products Available at BVV
Model 200 | Laboratory-Grade Vacuum Gauge | Accuracy 0.001 to 6 Torr
Model 200 | Laboratory-Grade Vacuum Gauge | Accuracy 0.001 to 6 Tor DigiVac Model 200 is a laboratory-grade vacuum gauge. The industry’s best value for a rugged digital vacuum gauge for measuring through 6 decades of rough vacuum. Giving wide range accuracy. Laboratory-Grade Vacuum Gauge: The DigiVac Model 200 is housed in a laboratory grade case consisting of vinyl clad metal on an extruded aluminum base ensuring maximum durability This DigVac gauge comes with everything to measure vacuum: Display gauge, cables, power and Agilent 531 thermocouple sensor with NPT Every DigiVac Vacuum gauge is pre-tested and calibrated under actual vacuum against a NIST-standard Highly impact-resistant because of no moving parts requiring infrequent calibration Applications: laboratory, coating, metalizing, distillation, refrigeration, schlenk line vacuum measurement The Model 200 is also available with the DigiVac Thermocouple Plus sensor, which is electrically equivalent to the Agilent 531 at a more economical price point Upgrade to the Agilent 536 sensor series | a thermocouple gauge tube with integrated baffle. Made from welded 304 steel with equivalent accuracy of the 531 sensor but has an additional baffle that protects the thermocouple technology to greatly extend the sensor’s life when exposed to condensable gases This DigiVac gauge measures vacuum in Torr. Technical Specifications Total Range .001-760 Torr Range with Accuracy .001-6 Torr 0 – 0.009 Torr +/-0.002 Torr0.010 – 2.00 Torr +/-15% of reading2.0 – 5.0 Torr +/- 1 Torr5 – 760 Torr – Continuous and monotonic Sensor Type Agilent 531, Agilent 536, Thermocouple Plus Dimensions 1.5” h x 4.25” w x 5.5” d
$549.61 - $748.00
Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25
Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25 The DigiVac Bullseye Precision Gauge with Bluetooth is the world’s first wireless vacuum gauge featuring one-of-a-kind patented vacuum graphing and DigiVac’s ‘Vacuum Gauge’ app Versatile wireless vacuum gauge that you can monitor right from your phone or tablet (Apple ios and android) Enables remote monitoring and troubleshooting Set low and high alarm from your phone Email vacuum data to document leaks, baseline pressure or pump-downs Use battery power or standard microB-USB power Choose standard Thermocouple Plus sensor or the Upgraded Agilent 531 NPT sensor (this sensor configuration is CE and RoHs compliant), or the Agilent 536 NPT sensor which includes an integrated baffle to extend the life of the sensor by helping to protect it from contamination Portable and Precise Rugged thermocouple vacuum gauge ideal for understanding: Leaks, Pump Downs, Out-gassing or Stable Systems Includes a powerful magnet and kickstand to enable hands-free operation Long battery life and versatility with 12 different measuring units (micron, Torr, Inches of Hg, kPa, Inches of H20, millitorr, mbar, Pa, PSIA, mm of Hg, bar, and mm of H2O) Calibrated under actual vacuum against a NIST standard. Graphing and Analysis Patented vacuum graphing displays vacuum and time data Visual graphing right on the display that identifies current system status Vacuum Analytics to quickly identify vacuum pressure trends Graphical display for quick determination of vacuum level Bluetooth Bullseye Gauge Applications Vacuum pump testing Baseline vacuum pump performance Transformer dry-out Schlenk line monitoring Botanical oil processing Distillations Vacuum Process Monitoring Technical Specifications Units Torr, mbar, bar, kPa, inHg, mm Hg, millitorr, microns, inches of water, PSI, Pa Control Range 1E-4 – 1000 Torr Range with Accuracy .001-5 Torr Sensor Type Agilent 531 (NPT), Agilent 536 (NPT, KF15, or KF16), VGT500 Dimensions 6.2”H x 3.7”W x 1.3”D Certifications ROHS and CE
$735.00 - $845.62
Bullseye Precision Gauge-531 | with upgraded Agilent 531 Sensor
Bullseye Precision Gauge-531 | with upgraded Agilent 531 Sensor The Bullseye Precision Gauge-531 is the Bullseye Vacuum Gauge that you trust with the upgraded Agilent 531 sensor The Bullseye Precision Gauge-531 is a rugged and portable vacuum gauge, which features visual graphing to pinpoint problems in real time (leak, pump, outgas, stable). Includes a powerful magnet and kickstand to enable hands-free operation. Benefits of Choosing the Upgraded Agilent 531 sensor option: All metal, sturdy, structure Used in applications requiring higher levels of accuracy Vacuum Interface: 1/8″ NPT but can be easily adapted to KF Total Range: of 1 millitorr to 760 Torr (continuous and monotonic from atmosphere down to 6 Torr) Range with Accuracy: 10 millitorr (.001 Torr) to 6 Torr (1 x 10-3 mbar to to 7.99 mbar) 15% accuracy Electrically identical to Agilent 536 sensors Bullseye Precision Gauge-531 Features Portable and Precise Rugged thermocouple vacuum gauge ideal for understanding: Leaks, Pump Downs, Out-gassing or Stable Systems Includes a powerful magnet and kickstand to enable hands-free operation Long battery life and versatility with 12 different measuring units (micron, Torr, Inches of Hg, kPa, Inches of H20, millitorr, mbar, Pa, PSIA, mm of Hg, bar, and mm of H2O) Calibrated under actual vacuum against a NIST standard. Graphing and Analysis Patented vacuum graphing displays vacuum and time data Visual graphing right on the display that identifies current system status Vacuum Analytics to quickly identify vacuum pressure trends Graphical display for quick determination of vacuum level Bullseye Precision Gauge-531 Applications Vacuum pump testing Baseline vacuum pump performance Transformer dry-out Schlenk line monitoring Botanical oil processing Distillations Vacuum Process Monitorin Technical Specifications Units Torr, mbar, bar, kPa, inHg, mm Hg, millitorr, microns, inches of water, PSI, Pa 1E-4 – 1000 Torr Range with Accuracy .001-5 Torr Sensor Type Agilent 531 NPT Dimensions 6.2”H x 3.7”W x 1.3”D Certifications ROHS and CE
$640.62
Bullseye Precision Gauge with Agilent 536 KF25, NPT or KF16 Sensor | Vacuum Gauge for Processing
Bullseye Precision Gauge with Agilent 536 KF25, NPT or KF16 Sensor | Vacuum Gauge for Processin A rugged portable vacuum gauge for processing applications that pairs unparalleled vacuum measurement with the Agilent 536 sensor that has an integrated baffle which provides protection and helps reduce risk of sensor failure Numeric & Graphical Displays See vacuum readings in either numbers or easy-to-read graphs Has 12 measurement units for implementation in almost any vacuum application Torr, mbar, bar, kPa, inches of Hg, mm Hg, millitorr, microns, inches of water, PSI, Pa Calibrated & Precise Delivered pre-calibrated with Agilent/ Varian 536 thermocouple sensor under actual vacuum against the NIST standard. Note: NIST certification sent with the gauge is an available option here The 536 all stainless steel sensor with baffle has extended sensor life in the presence of condensable gases and improved performance at higher pressures Vacuum Interface: KF25 or NPT or KF16 Wetted materials: 304L Stainless steel, glass, Type P thermocouple Extended Battery Lifespan Portable | Solid state electronics built into a handheld gauge that operates using AA batteries that lasts up to 70 hours In-lab use | Power gauge using the integrated Micro-USB port for long-term use without the need to change batteries Ideal Vacuum Gauge for Processing Applications Laboratory, freeze drying, low pressure distillations, foreline monitoring, Schlenk lines performance, and transformer dry-out Or any application with higher levels of condensables where sensor failure is more likely Units Torr, mbar, kPa, millitorr, microns, Torr, mbar, bar, kPa, inches of Hg, mm Hg, millitorr, microns, inches of water, PSI, Pa 1E-4 – 1000 Torr Range with Accuracy .001 – 5 Torr Sensor Type Agilent 536-KF25 Dimensions 11 x 10 x 4 in Certifications CE, RoHS
$618.75 - $653.00
Lab Armor Peltier Bead Bath
Lab Armor Peltier Bead Bath Lab Armor revolutionizes the scientific bath industry with the Peltier Bead Bath! Utilizing Peltier Thermoelectric Cooler-Heater (TEC-H) technology, the Peltier Bead Bath is an all-in-one unit that efficiently controls the temperature in chilled and heated applications. The air jacketed design is exclusive to the Lab Armor Peltier Bead Bath, and it is the only bead bath on the market with both cooling and heating capabilities. The Peltier Bead Bath works with Beads to deliver exceptional temperature uniformity! The Lab Armor Peltier Bath securely holds lab vessels of various sizes in place. Samples may be conveniently transported using the removable Lab Armor Peltier Bead Baskets. The Bead Bath helps prevent the risk of sample contamination by removing water from many laboratory processes. These design features allow the Peltier Bead Bath to perform the role of multiple appliances, reducing benchtop space requirements.
$3,934.32 - $6,206.61
Lab Armor BEAD BATH
BEAD BATH Unique DESIGN Lab Armor Bead Baths were specifically designed to work with Lab Armor Beads to optimize their performance. Uniform Temperatures With Bead Bath designed expressly for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is +/-1.0 at 37ºC. Always On The bath always stays on, so you don’t have to plan around warmup times. You don’t need to worry about refilling or low water burnout because there is no water to evaporate. Lab Armor Bead Baths are up to 50% more energy efficient than a standard lab water bath. Stays Clean Lab Armor reduces the risk of contamination. Contaminated samples and reagents result in distorted data and unpredictable outcomes. Stays Organized Unlike water baths that require racks, floats, and bottleneck weights, Bead Bath naturally holds things in place without accessories. So no more floating accidents.
$1,428.95 - $2,813.02
Lab Armor Beads
Lab Armor Beads Modern Upgrade Lab Armor Beads are dry metallic beads that replace water/ice/oil/sand in baths, giving old equipment a cool, shiny, state-of-the-art upgrade. Stays clean Lab Armor eliminates water bath contamination, harmful germicides, and unpleasant maintenance. Beads are dry and naturally more resistant to microbial growth than water, and therefore, are less likely to harbor and contribute to transmitting microorganisms in the laboratory. Saves time & Money Lab Armor Beads will help you save time and money. No more hassling with emptying, cleaning, and refilling water baths. Always On The bath stays on so there is no need to plan around warm-up times. Lab Armor Beads eliminate the worry about low water burnout because there is no water to evaporate. Other benefits of using Lab Armor Beads: Cleaner working environment. Greater organization capabilities as samples are held in place. Environmentally friendly. Temperature range -80°C to 180°C. High thermal conductivity. Non-toxic, non-vaporizing, antimicrobial No daily requirement for biocides, germicides, and other cleaners. No gray water. Smooth rounded shape allows fluidity and will conform to many sizes and shapes of vessels. No Racks, floats or weights required to hold items in place. Recyclable.* Weight 4 Lbs. (1.81 kg) per Liter.
$214.49 - $857.93
King Kone Grinder and Commercial Sifter Kit
Get your pre-roll business rolling with the King Kone Pre-Roll Starter Kit. Whether you are small farm or company newly expanding into pre-rolls, this kit gives your business everything it needs to efficiently grind and pack your product. This pre-roll production kit includes a Metal King Kone Pre-roll Cone Filling Machine and an Industrial Cannabis Grinder. This grinder provides a high-quality grind for the highly efficient King Kone Pre-Rolled Cone Filling Machine. Industrial Cannabis Grinder The Industrial Cannabis Grinder comes with different-sized screens to help deliver the perfect grind and even burn for your pre-roll brand. King Kone Filling Machine Perfect for small farms or companies expanding into pre-rolls, the King Kone is budget friendly, versatile, and easy to use. It also has attachments, so it can pack half-gram 84mms, three-quarter gram 98mm, and 1-gram 109mm pre-rolled cones.
$519,799.00
SP BEL-ART POLYETHYLENE POROUS FILTER PLATE; FOR 10.25 IN. I.D. BUCHNER FUNNELS
SP BEL-ART POLYETHYLENE POROUS FILTER PLATE; FOR 10.25 IN. I.D. BUCHNER FUNNELS Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process
$335.00 - $357.00
SP BEL-ART TECHNI-DOME POLYCARBONATE GAS-PURGE DESICCATOR; 2.3 CU. FT.
SP BEL-ART TECHNI-DOME POLYCARBONATE GAS-PURGE DESICCATOR; 2.3 CU. FT. Generous quantities of standards, samples, electronics or other moisture-sensitive items can be protected in the Techni-Dome® 360 Vacuum Desiccator. A traditional style domed desiccator, the Techni-Dome® 360 is made from polycarbonate and offers a clear, unobstructed view of contents, with exceptionally large dry storage space, portability, and ease of use. Spacious 65 liter (4000 cu. in.) internal volume can hold items up to 45cm (18”) tall or wide, including racks, trays and instruments Two gas ports are tapered and accept tubing with ¼ to ⅜” I.D.; easy turning PTFE stopcocks facilitate turbulence-free entrance of gases, minimizing disturbance of contents Polycarbonate construction is resistant to most common chemicals, as well as thermal stress; wipes clean easily Includes two removable, polypropylene, 36.5cm(14.5”) and 22.5cm (9”) diameter shelves Side handles provide easy portability and can be used as a place to affix tamper-evident seals Gas ports can be closed to use desiccator with standard desiccant cartridges, F420450250, F420450200, F420480100
$627.00
SP BEL-ART TECHNI-DOME POLYCARBONATE VACUUM DESICCATOR; 2.3 CU. FT.
SP BEL-ART TECHNI-DOME POLYCARBONATE VACUUM DESICCATOR; 2.3 CU. FT. This domed desiccator provides a roomy interior for large, moisture sensitive materials as well as portability and ease of use. Tapered stopcock accepts ¼" to ⅜” I.D. tubing and has an easy turning PTFE valve which allows for the gentle entrance of air and minimal disturbance to the inside chamber and its contents. Use to degas liquids, porous solids, or silicon molds to eliminate air bubbles Spacious 65 liter (4000 cu. in.) internal volume can hold items up to 45cm (18”) tall or wide, including racks, trays and instruments Holds a full vacuum (29” Hg) at room temperature for 24 hours Laboratory grade polycarbonate provides a clear, unobstructed view of contents; resistant to most common chemicals and thermal stress Side handles provide easy portability and can be used to affix a lock or tamper-evident seals Gas ports can be closed to use desiccator with standard desiccant cartridges, F420450250, F420450200, F420480100 Includes two removable polypropylene shelves; 36.5cm(14.5”) and 22.5cm (9”
$556.00
3.5CFM Dry Floating Scroll Vacuum Pump
3.5CFM Dry Floating Scroll Vacuum Pump Intoducing the DSVF^ Vacuum Pump, equipped with cutting-edge patented floating scroll technology for unparalleled performance. This pump boasts a 3.5CFM (100 L/min) pump speed and an ultimate pressure of 25 Microns (≤ 0.03 mbar), making it a powerhouse in creating and maintaining vacuums. The 100% oil-free design ensures clean and efficient operation, while the brushless DC motor, with 350W motor power and 200W installed power, provides reliability and longevity. With a compact size ideal for portable equipment, this vacuum pump offers unlimited vapor tolerance and a noise level as low as 55 dB(A) with its case. The SVF-E2-100 is maintenance-free, featuring a robust build with inlet/outlet connections in KF-25, air-cooled cooling system, and a wide ambient temperature range from -40ºC to 50ºC. Elevate your vacuum processes with this advanced, compact, and powerful solution. Specifications Model BSVF6 Pump Speed 100 L/min Ultimate Pressure ≤ 0.03 mbar (25 Micron) Motor Power 350 W Installed Power 200 W Motor Type Brushless DC Motor DC Voltage 48 VDC AC Voltage (with adapter) 100 – 240 VAC Maximum Speed 4000 RPM Vapor Tolerance Unlimited Maximum Inlet Speed Unlimited Maximum Outlet Speed 1 barg Noise Level (With Frame) 60 dB(A) Noise Level(With Case) 55 dB(A) Weight (With Frame) 7.5 kg Weight (With Case) 8.5 kg Dimensions (With Frame) 324×225×175mm Dimensions (With Case) 394×236×189mm Inlet/Outlet Connection KF-25 or G 3/8″ Cooling System Air – Cooled Ambient Temperature -40ºC to 50ºC
$1,395.00
SP BEL-ART "SPACE SAVER" POLYCARBONATE VACUUM DESICCATOR
SP BEL-ART "SPACE SAVER" POLYCARBONATE VACUUM DESICCATOR Degas liquids quickly and easily in the laboratory or classroom with this small plastic vacuum desiccator. These strong, shatterproof units provide dry storage and protection for sensitive products. Lighter and less costly than similarly sized glass models; does not chip like glass Holds a full vacuum (29.9" Hg) at room temperature for 24 hours Tapered polypropylene stopcock with PTFE plug (F42040-0000) accepts tubing with ¼ to ⅜” I.D. and allows a controlled entrance of air preventing unnecessary turbulence Neoprene O-ring assures a tight seal down to 0˚C without the need for grease (ring will not be harmed if grease is used) 'Flat Dome,’ clear polycarbonate top with large ribbed knob maximizes interior clearances and provides an average of 13% greater interior volume over standard hemispherical domes All models include a 0.32 cm (⅛") thick perforated plate; disposable or reusable desiccant can be placed on or under this plate White polypropylene bottom models can support incandescent crucibles on Minerit HD High Heat Ceramic Desiccator Plates (series F42038) Clear polycarbonate bottom models offer increased viewing visibility from more angles
$101.00 - $186.00
SP BEL-ART FRIGIMAT JUNIOR DRY ICE MAKER; U.S. MODEL
SP BEL-ART FRIGIMAT JUNIOR DRY ICE MAKER; U.S. MODEL Dry ice flakes are useful for packing around irregularly shaped items and are easily produced as needed with the Frigimat® Junior Dry Ice Maker. When the cylinder valve is opened about ¾ turn, LCO2 expands into the bag to create dry ice snow. The valve is then closed and the bag is ready to be removed and emptied. Brass nozzle screws onto any liquid LCO2 cylinder equipped with a dip tube Makes .77kg (1.7lb) of flakes per bag Cone dimensions: 13cmL (5") x 5.1cm diameter (2") at end Bag dimensions: 15W x 30cmL (6 x 12") Shipping weight: 0.54kg (1.2lbs)
$265.00
SP BEL-ART FRIGIMAT DRY ICE MAKER; U.S. MODEL, 12 X 6.5 X 5 IN.
SP BEL-ART FRIGIMAT DRY ICE MAKER; U.S. MODEL, 12 X 6.5 X 5 IN. The Frigimat® eliminates the need to buy large quantities of dry ice when only a little is needed. It employs the Joule- Thomson effect to produce a solid 454gm (16 oz) block of dry ice in one to two minutes, and the block can be removed in just 30 seconds. Brass relief valve safely vents excess gas Each 50lb. cylinder of liquid CO2 with a dip tube will make 8 or 9 blocks of dry ice, each measuring 8.5cm (3⅜") x 11cm (4⅜") long Made of epoxy-coated steel with an aluminum ice chamber and brass valves with four non-skid rubber feet Includes a 1.8m (6 feet) nickel plated copper connecting tube with standard CGA 320 (0.830"-14) thread couplings for easy attachment to an LCO2 cylinder Dimensions: 30 x 17 x 13cmH (12 x 6½ x 5"); shipping weight: 5.5kg (12lbs)
$1,825.00
SP BEL-ART ECONOMY FRIGIMAT DRY ICE MAKER; U.S. MODEL, 14.75 X 5.5 X 6 IN.
SP BEL-ART ECONOMY FRIGIMAT DRY ICE MAKER; U.S. MODEL, 14.75 X 5.5 X 6 IN. roduces a solid 454gm (16oz) block of dry ice in one to two minutes. Each 50lb. cylinder of liquid CO2 with a dip tube will make 8 or 9 blocks of dry ice measuring 9.2 x 10.4cmL (3⅝ x 4"). Polyethylene ice chamber is held in place by a metal clamping mechanism Porous polyethylene diffusion plate vents excess gas Built-in gas pressure gauge and relief valve Epoxy-coated steel frame has four non-skid rubber feet to prevent sliding Includes a 1.8m (6ft) nickel plated copper connecting tube with standard CGA 320 (0.830"-14) thread couplings for easy attachment to a LCO2 cylinder Overall dimensions: 37 x 14 x 15cmH (14¾ x 5½ x 6"); shipping weight: 3.9kg (8.5lbs)
$1,203.00
SP BEL-ART FRIGIMAT CUB - DRY ICE MAKER; 5⅝ X 7⅝ X 6½ IN
SP BEL-ART FRIGIMAT CUB - DRY ICE MAKER; 5⅝ X 7⅝ X 6½ IN Easy to set up and use, this compact device saves the time and expense of receiving a dry ice delivery. Can be attached to a liquid CO2 cylinder (not included) equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of dry ice in only a few minutes. Each 50lb. cylinder makes from 10-16 blocks of dry ice Dry ice production can be viewed through the transparent polycarbonate body that secures without clamps, screws or tools ensuring easy removal of the solid block of dry ice and disconnection from the CO2 cylinder Lightweight body is never as cold as the dry ice, even when filled; allows safe transport of the unit and contents when wearing appropriate gloves Rugged nickel-plated "pigtail" connects it to the CO2 cylinder valve which is used to regulate gas flow Operates at very low pressure (displayed on the built-in dial gauge); incorporates multiple pressure relief safeguards Includes a 1.8m (6ft) nickel-plated copper connecting tube with standard CGA 320 thread coupling for easy attachment to a LCO2 cylinder
$677.00
King Kone Starter Mini Kit
King Kone Starter Kit Get your pre-roll business rolling with the King Kone Pre-Roll Starter Kit. Whether you are small farm or company newly expanding into pre-rolls, this kit gives your business everything it needs to efficiently grind and pack your product. This pre-roll production kit includes a Metal King Kone Pre-roll Cone Filling Machine and an Industrial Cannabis Grinder. This grinder provides a high-quality grind for the highly efficient King Kone Pre-Rolled Cone Filling Machine. Finally, the $100 store credit gives you a head start on any pre-roll cones you want for your brand. You can also bundle an industrial sifter to the order for additional savings. Spark up your pre-roll business with King Kone Pre-Roll Starter Kit. Industrial Cannabis Grinder The Industrial Cannabis Grinder comes with different-sized screens to help deliver the perfect grind and even burn for your pre-roll brand. King Kone Filling Machine Perfect for small farms or companies expanding into pre-rolls, the King Kone is budget friendly, versatile, and easy to use. It also has attachments, so it can pack half-gram 84mms, three-quarter gram 98mm, and 1-gram 109mm pre-rolled cones.
$4,312.99
Quick Sift - Commercial Sifting Machine - Automatic Sifter
Quick Sift - Commercial Sifting Machine - Automatic Sifter Sifting your cannabis is great way to automatically remove stems and if you are producing a premium pre-roll product, it is always best to sift out any stems! This commercial sifting machine was specifically designed with processors in mind - the stainless steel construction and screens ensure you can easily clean our sifter and the screen sizes are fine tuned for the most common sifting needs. The commercial grade sifter offers a larger diameter coming in at 16 inches compared to the 13.74 inches of the original starter sifter - this means you'll be able to sift more flower in one sitting! Once you've ground your cannabis, all you need to do is pour your flower into the sifter and switch it on. You can now walk away and wait for your flower to be automatically sifted - no more standing around doing manual sifting. Sifting your cannabis will not only ensure no stems make it into your pre-rolls, but will also ensure nothing else makes into your pre-rolls, like large leaves, gravel, or any other foreign matter. Additionally, having a consistent grind will make your pre-rolls burn more evenly and pack more evenly in any cone filling machine. Cannabis Specific Sifter The commercial sifter was specifically designed for cannabis processors and dispensaries. From its stainless steel construction, to multiple screen sizes, our team of Pre-Roll Experts is confident this sifter or our other larger sizes will be the perfect addition to your pre-roll production process. We offer multiple screen sizes, which will allow you to customize the particle size for the flower in your pre-rolls. Depending on the strain or weight of the pre-roll you are making, you may want to experiment with various screen sizes. Multiple Screen Sizes When it comes to sifting your cannabis flower, you will want to have an ideal particle size for your flower in mind. If you are unsure what size screen you need, our team of Pre-Roll Experts is here to help! Depending on the strain and grinder you are using, your ground flower will have a different consistency. Additionally, depending on the size cone you are using and your desired fill weight, the particle size of your flower will play a major role. For example, a smaller particle size will allow you to pack more flower into a small cone, but too small of a particle size may lead to a poor, uneven burn. Machine Starter Kits The QuickSift Pro pairs perfectly with our industrial cannabis grinder and any of our cone filling machines. Although our industrial grinder will grind stems to a small enough size, some brands want to sift all the stems out. The larger grind screen can be used to ensure stems stay big enough to be sifted completely out and then the rest of the material is ground. Hemp processors have great success sifting their hemp post harvest, due to the larger amount of stems and leaves. Specifications PURPOSE: Sifting Ground CannabisCONSTRUCTION: Stainless SteelSCREEN DIAMETER: 16 inchesMACHINE TYPE: SifterPOWER REQUIREMENT: 120vRATED VOLTAGE: 110VRATED FREQUENCY: 60HzRATED POWER: 50W
$1,649.00
Quick Sift Mini - Sifting Machine - Automatic Sifter
Quick Sift Mini - Sifting Machine - Automatic Sifter Sifting your cannabis is great way to automatically remove stems and if you are producing a premium pre-roll product, it is always best to sift out any stems! Our QuickSift was specifically designed with cannabis processors in mind - the stainless steel construction and screens ensure you can easily clean our sifter and the screen sizes are fine tuned for the most common sifting needs. Once you've ground your cannabis, all you need to do is pour your flower into the sifter and switch it on. You can now walk away and wait for your flower to be automatically sifted - no more standing around doing manual sifting. Sifting your cannabis properly will not only ensure no stems make it into your pre-rolls, but will also ensure nothing else makes into your pre-rolls, like large leaves, gravel, or any other foreign matter. Additionally, having a consistent grind will make your pre-rolls burn more evenly and pack more evenly in any cone filling machine. Cannabis Specific Sifter Our QuickSift was specifically designed for cannabis processors and dispensaries. From its stainless steel construction, to multiple screen sizes, our team of Pre-Roll Experts is confident this sifter or our other larger sizes will be the perfect addition to your pre-roll production process. We offer multiple screen sizes, which will allow you to customize the particle size for the flower in your pre-rolls. Depending on the strain or weight of the pre-roll you are making, you may want to experiment with various screen sizes. Multiple Screen Sizes When it comes to sifting your cannabis flower, you will want to have an ideal particle size for your flower in mind. If you are unsure what size screen you need, our team of Pre-Roll Experts is here to help! Depending on the strain and grinder you are using, your ground flower will have a different consistency. Additionally, depending on the size cone you are using and your desired fill weight, the particle size of your flower will play a major role. For example, a smaller particle size will allow you to pack more flower into a small cone, but too small of a particle size may lead to a poor, uneven burn. Machine Starter Kits Our QuickSift pairs perfectly with our industrial cannabis grinder and any of our cone filling machines. Although our industrial grinder will grind stems to a small enough size, some brands want to sift all the stems out. The larger grind screen can be used to ensure stems stay big enough to be sifted completely out and then the rest of the material is ground. Hemp processors have great success sifting their hemp post harvest, due to the larger amount of stems and leaves.
$699.00
Industrial Cannabis Grinder
Industrial Cannabis Grinder Stop blending or shredding your flower into dust! Our Industrial Cannabis Grinder was built with pre-rolls in mind. With 3 screen sizes and multiple blade options, the pre-roll machine will grind your flower to the perfect consistency without destroying the valuable trichomes you worked so hard to grow! Fitting perfectly beside your cone filling machine, our Industrial Cannabis Grinder uses a high torque, low-rpm motor to ensure your cannabinoids and trichomes aren’t damaged due to friction and high heat. This cannabis grinder comes with small, medium and large screen sizes, which allows you to control the particle size of your flower. Whether you want a blend of particle-sizes to create the perfect pre-roll or require a different screen size for different strains - the flexibility of our cannabis grinder is unmatched. The Industrial Cannabis Grinder features stainless steel blades, which are manufactured to reduce residue buildup on the blades. The blades are removable for easy access cleaning, so you never need to worry about excessive downtime for cleaning your preroll machines. Stop turning your flower to dust and get a cannabis grinder that keeps your flower as potent and flavorful as possible while ensuring the perfect size, all with perfect ease! Specifications OUTPUT: 1lb per minute. Continuous grinding system means no loading/downtime on the machine. MACHINE TYPE: Grinder GRINDER SCREEN SIZES: Small: 4mm diameter, Medium: 5.5mm diameter, Large: 6mm diameter. Also available for purchase-Extra Small: 3mm diameter NO MORE DUST: 3 included-Small, Medium, Large. Extra Small available separately) of adjustable screens, so you can control the particle-size of your grind and safely hand over the grinding process to anyone on your team! EASY TO CLEAN: Grinder is made of stainless steel with easily removable parts for cleaning and soaking. CERTIFICATION: UL Listed WARRANTY: 1 Year Warranty Standard. Please see additional details in FAQ. POWER REQUIREMENT: 110V. Please note, if using this machine outside of the U.S. or Canada, a Plug Adapter and/or Step-down transformer may be needed to convert high voltage power to a lower voltage. SIZE: 18in x 18in x 12in Perfect Grind Our Industrial Cannabis Grinder comes with adjustable screens sizes and is fully customizable, so you can create the perfect grind for your flower. Some strains are more dense than others, so the adjustable screens and blade configurations on this pre-roll machine allow you to get the perfect grind every time - no more turning your flower into dust! Once you have the perfect grind, we recommend completing your fleet of pre-roll machines with a sifting machine and packing your cones with our King Kone filling machine! Terpene Preservation The high-torque and low RPM design on this cannabis grinder helps to preserve terpenes and trichomes in the flower material by reducing the amount of heat and stress applied to the flower material. The blades of our cannabis grinder move much slower compared to a high-rpm grinder like a blender or one of the whip style cannabis grinders, but this pre-roll machine still has enough torque to grind dense buds with ease. Industrial Build Made out of stainless steel and all food-grade materials, our Industrial Cannabis Grinder is built like a tank. The stainless steel blades in this preroll machine are removable and easy to clean. The entire pre roll machine can be taken apart quickly and cleaned with alcohol. Plus, each Industrial Cannabis Grinder comes with a 1-Year Warranty and all parts are replaceable.
$2,499.00
SP BEL-ART SAFE-LAB THERMOMETER JOINT ADAPTER FOR TAPERED JOINTS, PTFE
SP BEL-ART SAFE-LAB THERMOMETER JOINT ADAPTER FOR TAPERED JOINTS, PTFE Teflon® PTFE body with Viton® O-ring for air tight vacuum work (Size 10/18 adapter does not have a body O-ring). Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items Rotating the extracting nut removes the adapter from flask Not autoclavable
$84.00 - $107.00
Cascade CVO-10 Vacuum Oven
Cascade CVO-10 Vacuum Oven High production, large vacuum drying system for vacuum purging production quantities, the Cascade CVO-10 is our largest 10 cubic foot vacuum oven. Model CVO-10 offers incredible temperature stability for vacuum drying and purging of pharmaceuticals, botanicals, and slurries – especially temperature sensitive material. This vacuum oven liberates solvents, water, and other unwanted compounds in large batch production environments. Note that this is a 220V vacuum oven. The Cascade Difference Vacuum ovens have been around for decades. Basic vacuum ovens are mass-produced and sold by many large-scale laboratory equipment distributors. But there are key differences between and other inexpensive, often imported vacuum ovens. Exceptional Temperature Control & StabilityThe CVO-10 uses a unique control logic not found in most lab grade vacuum ovens. The temperature probe is INSIDE the oven, which minimizes temperature overshoot and delivers best-in-class temperature stability and uniformity particularly in the low temperature ranges. Accurate, stable temps throughout the CVO-10 eliminate hot and cold spots, making accurate use of every inch of shelf space. Independent Overtemp Failsafe ProtectionThe CVO-10 is equipped with a heating cutoff system that will automatically stop power to the heaters when the oven shelf temps exceed 392°F or 200°C. This protection system will provide peace of mind for overnight processing or unattended vacuum bake outs. Digital Vacuum GaugeThe digital vacuum gauge installed on the CVO-10 is selectable between inches of mercury (“Hg) or torr, mtorr. Equipped for Inert Gas Backfill. Built-In Safety ReliefIntroduce inert gasses such as nitrogen, argon, helium, etc. as part of your process via the ¼” rear vent barb. The maximum backfill pressure is 15PSI. In an overpressure situation, a simple, built-in safety relief allows gasses to escape via a spring loaded tempered window. Flexible Pumping / Feedthru Connection PortsFor faster evaporation, purging or drying the CVO-10 includes MAX EVAP connection kit. The MAX EVAP connection kit secures to the oven’s rear 1” dia KF-25 port located on the back center of the chamber. The MAX EVAP connection never reduces flow by continuing with 1” diameter vacuum rated clear lines, a 1” dia KF-25 side mounted vacuum valve and KF-25 fittings and hardware. This KF-25 port can also be used to run temperature feedthrus, or monitoring sensors inside the vacuum chamber during processing. Ergonomically Designed, Easy Quarter-Turn ValvesFor anyone that has struggled with consistently turning the small, round, low-quality vacuum/vent valves, relief is in sight. You will love our large, quarter-turn vent valve. Your wrists will thank you! Faster Venting With Large ½” Diameter Vent LinesFor large capacity production environments, time is money. The CVO-10 vacuum oven has larger than industry standard vent lines. ½” diameter vent lines means operators spend less time venting the oven. Features CVO-10 PRO Package Includes: Cascade Sciences CVO-10 Vacuum Oven Heavy-Duty Industrial Mobile Cart 9x Total Shelves – 28”W x 24”D MAXEVAP KF-25 Connection for faster purge Agilent IDP15 Oil-Free Vacuum Pump, 9cfm Features: NRTL Certified by TUV 9 sliding, removable shelves that pull out and stay in place for easy load/unload Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven Easy mobility as oven sits on heavy duty industrial cart. Pump sits underneath at base of cart Silicone Door Gasket Bright LED lights in window for visibility of sensitive material Digital vacuum gauge reads in inches of mercury or torr Smooth, quarter-turn vent valve Oven to pump connection: Rear KF-25 line, valve 220V / 1ph / 10AMPS plugs into NEMA 16-5R outlet Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007 156CFR/201 11 SGCC -2577 ½ UA Ergonomic. Turn vacuum pump on/off from oven control panel Fast Venting with larger ½” diameter vent line. Allows for nitrogen or other inert gas connection Touch Panel LED control screen with user settable features (torr, mtorr, Hg, Fahrenheit, Celsius) Walls lined with heat conductive copper for improved temp transfer. Known antimicrobial properties can prevent bacteria buildup Specifications VOLUME:9.3 Cubic Ft. (263 Liters) SHELVES:9 total (max), removableFull-extension, stay in placeIntegrated copper strips optimize temp transferSurface area: 28″W x 24″DWeight Capacity Per Shelf: 50 lb / 22.7 kgApprox 930 cubic inches of volume OVEN INTERIOR:28”W x 24”D x 24”H711mm x 609mm x 609mm OVEN EXTERIOR:(not including rack)42” W x 40” D x 67.4”H1067mm x 1021mm x 1712mm WEIGHT:Shipping: 775 lb/ 352 kgNet Weight: 663.0 lb/ 301 kg TEMPERATURE RANGE:Ambient +26° to 302°F / Ambient +14.4°C to 150°C TEMPERATURE UNIFORMITY:@ 105°F +/- 0.2°F – ±2.0°F@ 200°F +/-0.4°F – ±5.5°F@ 300°F +/- 0.2°F – ±8.0°F @40°C +/- 2°C – ±1.0°C@90°C +/- 3°C – ±3.0°C@150°C +/- 4.5°C – ±4.5°C TEMPERATURE STABILITY:@ 105°F +/- 0.2°F – ±0.2°F@ 200°F +/-0.4°F – ±0.4°F@ 302°F +/- 0.2°F – ±0.2°F @40°C +/- 0.1°C – ±0.1°C@93.3°C +/- 0.2°C – ±0.2°C@150°C +/- 0.1°C – ±0.1°C HEAT UP TIME FROM AMBIENT:@ 105°F / 40.5°C – 42 min@ 200°F / 93.3°C – 94 min@ 302°F / 150°C – 175 min COOL DOWN TIMES:@ 105°F / 40.5°C – 330 min@ 200°F / 93.3°C – 94 min@ 302°F / 150°C – 420 min *Temperature performance specifications are preformed in empty ovens. Performance can vary in ovens containing product. VACUUM VALVE:Side Mounted Round VENT VALVE:¼ Turn Lever½” diameter line GLASS WINDOW:Tempered NGI-US to ANSI Z97.1.2007Interior lighting VACUUM GAUGE:Reads in inches mercury or torr(Selectable) CONTROLLER:Touch ScreenAccurate Within 1°FIndependent Overtemp Failsafe PORTS (REAR):Vacuum = KF-25 PortVent = 1/2” Barb INERT GAS INTRODUCTION:Yes. Via 1/2” Vent Barb15 psi max inlet pressure POWER:220V – 240V / 1ph / 10A 50/60HzCord IncludedNEMA 6-15R Power Outlet(System will run on 208V)Oven BTU Rating at 250ºF: 6980 BTUs/hr at full capacity
$24,997.00 - $31,799.00
SP BEL-ART CELLULOSE FILTER PAPER DISCS (PACK 100)
SP BEL-ART CELLULOSE FILTER PAPER DISCS (PACK 100) These heavy bond grade filter paper discs are custom-sized to fit Table-Top Buchner funnels and have a thickness of 0.30mm. Made from creped white cellulose to improve porosity Flow rate: 90ml per minute Wet burst strength is greater than 68 KPa; able to retain particles as small as 3 microns
$130.00 - $1,236.00
SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH PERFORATED PLATE; 10.25IN. I.D., 8IN. HEIGHT
SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH PERFORATED PLATE; 10.25IN. I.D., 8IN. HEIGHT Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process
$486.00
Cascade CVO-2 Vacuum Oven
Cascade CVO-2 Vacuum Oven Model CVO-2 offers incredible temperature stability for vacuum drying and purging of pharmaceuticals, botanicals, slurries, or any temperature sensitive material. This vacuum oven liberates solvents, water, and other unwanted compounds in small batch, R&D and lab environments. NRTL Certified. Operating Range: Ambient +10ºC to 150°C (Ambient +18°F to 300°F) Benchtop Size: 1.47 Cubic Ft (47.2L) 12″W x 20″D x 12″H Exceptional Temperature Control & Stability The CVO-2 uses a unique control logic not found in most lab grade vacuum ovens. The temperature probe is INSIDE the oven, which minimizes temperature overshoot and delivers best-in-class temperature stability and uniformity particularly in the low temperature ranges. Accurate, stable temps throughout the CVO-2 eliminate hot and cold spots, making accurate use of every inch of shelf space. Independent Over-temp Failsafe Protection The CVO-2 is equipped with a heating cutoff system that will automatically stop power to the heaters when the oven shelf temps exceed 200°C or 392°F. This protection system will provide peace of mind for overnight processing or unattended vacuum bake outs. Digital Vacuum Gauge The digital vacuum gauge installed on the CVO-2 is factory default set to read in inches of mercury (“Hg) with a scale of 0 – 29.9”Hg. Change the unit of vacuum measurement to read in a wide variety of units from mmHg, bar psi, kPa, cm2, mmH20. Zero out the vacuum gauge to calibrate for just above sea level adjustments. Equipped for Inert Gas Backfill. Built-In Safety Relief Introduce inert gasses such as nitrogen, argon, helium, etc. as part of your process via the 1/4″ rear vent barb. The maximum backfill pressure is 15psi at the inlet. In an overpressure situation, a simple, built-in safety relief allows gasses to escape via a spring loaded tempered window. Flexible Pumping / Feedthru Connection Ports The CVO-2 ovens offer two different vacuum oven connection points. The standard connection is a 3/8″ dia barb located at the rear of the oven. It is connected to the vacuum valve level on the front control panel. For even faster evaporation, purging or drying consider upgrading to the MAXEVAP connection kit. The MAXEVAP connection kit secures to the oven’s rear 1″ dia KF-25 port located on the back center of the chamber. The MAXEVAP connection never reduces flow by continuing with 1” diameter vacuum rated clear lines, a 1” dia KF-25 side mounted vacuum valve and KF-25 fittings and hardware. This KF-25 port can also be used to run temperature feedthroughs, or monitoring sensors inside the vacuum chamber during processing. Stackable Shelf Design For Maximum Temperature Conduction Under vacuum, there is no air inside a vacuum oven. Temperatures are achieved by a process of conduction and radiation to move temperatures into the product inside the oven. stackable shelf design makes the most of this opportunity by making the chamber longer and narrower, rather than square and supplies stackable shelves in multiple height configurations to allow for the fastest, most uniform transfer of heat. Ergonomically Designed, Easy Quarter-Turn Valves For anyone that has struggled with consistently turning the small, round, low-quality vacuum/vent valves, relief is in sight. You will love our large, quarter-turn vacuum/vent valves. Your wrists will thank you! Door Gasket Options – Ideal For Your Process Vacuum ovens come standard with a High Temp Silicone Door Gasket. We also offer a Solvent resistant BUNA gasket as well. Ask us about the variety of door gaskets we can supply based on your application: Silicone, BUNA, Viton, Fluorosilicone. Gaskets will eventually wear out. It’s ideal to keep a few spares on hand. Features CVO-2 STANDARD Package Includes: Cascade Sciences CVO-2 (120V) Vacuum Oven Vacuum Oven to Pump Connection Kit Agilent IDP3 Oil-Free Vacuum Pump, 2.1 cfm Features: NRTL Certified by TUV 5 shelves (11.5″W x 19″D) in a flexible configuration. Stack-able and removable Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven Bright LED lights in window for visibility of sensitive material Digital vacuum gauge reports in wide variety of measurement units Simple, set-point control Smooth, quarter-turn vacuum and vent valves Rear KF-25 port allows for rapid MAXEVAP purging or running feedthroughs inside oven for monitoring 120V (220V available) Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007 156CFR/201 11 SGCC -2577 ½ UA Adjustable leveling feet ensure oven sits solid and level in the workspace CVO-2 Connections 3/8″ Barb for Vacuum Pump 1/4″ Barb for Venting (N2 Connection OK) KF-25 Port for feedthroughs or MAXEVAP Connection Kit Specifications Capacity Volume:1.67 Cu Ft (47.2 L) Exterior:20.5″W x 28.8″D x 24.9″H (521mm x 732mm x 633mm) Interior:12.0″W x 20.0″D x 12.0″H (304mm x 508mm x 304mm) Temperature Temperature Range:Ambient +10ºC to 150°C (Ambient +18°F to 300°F) Temperature Uniformity:@ 105°F ±2.5°F@ 200°F ±7.5°F@ 300°F ±16.0°F@ 40°C ±1.4°C@ 90°C ±4.2°C@ 150°C ±8.9°C Temperature Stability:@ 105°F ±0.3°F@ 200°F ±0.3°F@ 300°F ±0.3°F @ 40°C ±0.2°C@ 90°C ±0.2°C@ 150°C ± 0.2°C Heat Up Times:To 105°F 60 minutesTo 200°F 126 minutesTo 300°F 180 minutes To 40°C 60 minutesTo 90°C 126 minutesTo 150°C 180 minutes *Temperature performance specifications are preformed in empty ovens. Performance can vary in ovens containing product and variable ambient conditions. Vacuum Vacuum Valve:1/4 Turn Lever Vent Valve:1/4 Turn Lever Vacuum Gauge:Digital 0 to 29.9″Hg Temperature Controller:Digital Set PointAccurate Within .5ºC (1°F)Independent Overtemp Failsafe Ports (Rear) Vacuum:3/8″ Barb Vent:1/4″ Barb Auxiliary:KF-25 Port Inert Gas Introduction:Use 1/4″ Vent Barb15 psi max inlet pressure Power Options CVO-2 (120V Standard)110V – 120V / 1ph / 8A 50/60Hz (Cord Included)NEMA 5-15R Power OutletFull Power 2456 BTU/hr CVO-2-2 (220V)220 – 240V / 1ph / 4A 50/60 Hz (Cord Included)NEMA 6-15R Power Outlet Shelving Includes 5 aluminum, stackable, removable 1″ High = 1 each2″ High = 2 each3″ high = 2 each Surface Area:11.5″W x 19″D Weight Capacity:50 lbs (22.7 kgs)*Flexible configuration, 4 shelves max Door Interior Lighting:LED Strips (Rated to 150°C) Glass Window:Tempered NGI-US to ANSI Z97.1.2007 Gasket Type:12″ x 12″ High Temp Silicone Standard Gasket Rated to: 230°C (446°F) Gasket Options:Solvent Resistent BUNA Option rated to 105°C (221°F)Viton Option rated to 205°C (401°F) Weight Unit Weight:179 lb (81.2 kg) Shipping Weight:218 lb (99 kg) Shipping Dimensions:33″L x 33″W x 47″D (Class 85) CV0-2 Vacuum Oven Accessories: CVO-2 2″ ShelfCVO-2 3″ ShelfCVO-2 PTFE Sheets
$6,889.00 - $10,499.00
SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH MEDIUM POROSITY REMOVABLE PLATE
SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH MEDIUM POROSITY REMOVABLE PLATE Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process
$486.00 - $4,130.00
SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH MEDIUM POROSITY FIXED PLATE
SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH MEDIUM POROSITY FIXED PLATE Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process
$486.00 - $4,130.00
SP Bel-Art Polyethylene Buchner Table-Top Funnel with Coarse Porosity Removable Plate
SP Bel-Art Polyethylene Buchner Table-Top Funnel with Coarse Porosity Removable Plate Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process
$486.00 - $2,655.00
Cascade Vacuum Oven Door Gaskets
Cascade Vacuum Oven Door Gaskets Gaskets wear out. Remember to clean, rotate and have spares on hand! Our versatile collection of vacuum oven door gaskets is designed to fit the Cascade Sciences CVO-2 , CVO-5, and CVO-10 vacuum oven models, meeting your specific needs. Choose from our Solvent Resistant, VITON, and High Temp Silicone Door Gaskets, each offering superior performance! Features Viton Door Gaskets Available in sizes: 12″ x 12″ (CVO-2) and 18″ X 18″ (CVO-5) Material: VITON (FKM synthetic rubber and fluoropolymer elastomer) Max Temperature: 150°C / 302°F Ideal for Cascade 2 and 5cubic foot vacuum ovens Excellent resistance to solvents, oils, fuels, and mineral acids Low outgassing rate: 1 x 10-6 Torr-liter/cm2-s initial degassing rate Minimal weight loss of 0.07% after over 336 hours of vacuum exposure Exceptional UV resistance, protection against fungus, molds, and oxidation *The name VITON is a registered trademark of The Chemours Company Solvent Resistant Gaskets Available in sizes: 12″ x 12″ (CVO-2) and 18″ X 18″ (CVO-5) Material: BUNA (a material designed to withstand solvents) Max Temperature: 105°C / 221°F Ideal for Cascade 2 and 5 cubic foot vacuum ovens Application: Solvents Excellent resistance to many hydrocarbons, fats, oils, greases, hydraulic fluids, and chemicals High-Temp Silicone Door Gaskets Available in sizes: 12″ x 12″ (CVO-2), 18″ X 18″ (CVO-5), and 24″ X 28″ (CVO-10) Material: Silicone Max Temperature: 230°C / 446°F Ideal for Cascade 2 and 5 cubic foot vacuum ovens Application: General and High Temperature Resists moderate or oxidizing chemicals, ozone, and concentrated sodium hydroxide Specifications Viton Door Gaskets Available in sizes: 12″ x 12″ (CVO-2) and 18″ X 18″ (CVO-5) Color: Black Material: VITON (FKM synthetic rubber and fluoropolymer elastomer) Max Temperature: 150°C / 302°F Solvent Resistant Gaskets Available in sizes: 12″ x 12″ (CVO-2) and 18″ X 18″ (CVO-5) Color: Black Material: BUNA (a material designed to withstand solvents) Max Temperature: 105°C / 221°F High-Temp Silicone Door Gaskets Available in sizes: 12″ x 12″ (CVO-2), 18″ X 18″ (CVO-5), and 24″ x 28″ (CVO-10) Color: Orange Material: Silicone Max Temperature: 230°C / 446°F PRO TIP: Rotate your vacuum oven door gaskets for even wear and longer life.
$245.00 - $962.00
SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH COARSE POROSITY FIXED PLATE
SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH COARSE POROSITY FIXED PLATE Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process
$483.00 - $4,142.00
Welch 2163 6.1 Cfm Full Chemical-Resistant 8-Head Diaphragm Pump
Welch 2163 6.1 Cfm Full Chemical-Resistant 8-Head Diaphragm Pump The Welch 2163 is a high capacity full chemical-resistant, 8-head, oil-free dry diaphragm vacuum pump with all-aluminum contact surfaces and deep vacuum capability. Oil-Free, portable, full chemical-resistant, means less maintenance and no more frequent and costly oil change, or cross-contamination. Ai is now the official dealer of Welch vacuum pumps. These pumps are made in Germany with one year warranty and technical support from Welch Vacuum. Specifications Electrical requirements 110V or 220V, 50/60Hz single phase Pumping rate 7.8 cfm / 222 L/min Gasket material All-PTFE Ultimate vacuum level 6 torr / 8 mbar Maximum vacuum 29.9 in. Hg Inlet/Outlet 10mm hose barb Adjustable vac./gas ballast No Unit dimensions 21.25 x 9.25 x 12" (LxWxH) Package dimensions 28 x 16 x 20" (LxWxH) Shipping dimensions 40 x 48 x 25" (LxWxH) Package weight 90 Lbs Shipping weight 130 Lbs Compliance cUL
$4,169.00
CRVpro30
Welch CRVpro30 Two-Stage Rotary Vane Pumps •Consumes up to 36% less oil than comparable pumps. •Runs 10°C cooler than comparable pumps. Slows corrosion. •Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals. •Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. •Available in 115V/60Hz. •Free air displacement @60Hz: 22.1 cfm (627 L/min) •Ultimate pressure: 3x10-3 mbar (2x10-3 Torr). CRVpro vacuum pumps are two-stage direct-driven vacuum pumps. They are nine models of CRVpro available with free air displacement from 1.8 cfm to 52.5 cfm. Ultimate pressure to 2x10⁻³ torr. Three models of pumps with explosion proof motors, with free air displacements from 2.8 to 12.8 cfm, are available by clicking on the "Explosion Proof" tab below. The benefits of CRVpro pumps are: reduced risk of chemical attacks and oil breakdown by diluting chemical vapors with a larger oil chamber slowing down corrosion by cool running operation provides a measure of protection from sublimed chemical vapors with coating on pump module and oil case. These benefits lead to extended service interval. Depending on model, motor options include 1 Ph TEFC, 3 Ph TEFC, and 1 Ph ex proof motors. Welch vacuum pump oil is specifically formulated for the unique needs of vacuum pumps. Use of non-Welch vacuum pump oil voids any performance claims and product warranties. •In Duoseal belt driven rotary vane pumps, use Welch Duoseal or Welch Gold Oil •In CRVpro rotary vane pumps use Welch premium or Welch gold oil •In Chemstar belt driven rotary vane pumps use Welch gold oil CRVpro vacuum pumps can be used for freeze drying, vacuum ovens, concentrators, glove boxes, schlenk lines, HVAC/refrigeration service, coaters, backing diffusion pumps and turbo molecular pumps, short path, wiped film, metallurgy/vacuum furnaces, lamp manufacture, space simulation, degassing, vessel/chamber evacuation. CRVpro vacuum pumps prepared with perfluoropolyether (PFPE) for oxygen service are available. Contact your local Welch sales representative for details on PFPE prepared pumps and for selecting correct vacuum pump for your application. Weight 99 Ultimate Pressure 3 x10⁻³ Dimensions (mm) 683x384x389 Free Air Desplacement 22.1 (627)
$6,423.00
Silicone Gasket | Tri Clamp 3/8 in. (fits Sight Glass Mini) - FDA
Silicone Gasket | Tri Clamp 3/8 in. (fits Sight Glass Mini) - FDA Sanitary gaskets are used widely in the food, dairy, beverage, biotech, pharmaceutical, and all other sanitary Process industries to seal clamp connections in sanitary pipe lines. Flanged sanitary gaskets are manufactured with flanges to aid in installation. Silicone gaskets offer an economical choice with a wide working temperature (-58°F - 400°F). They are a platinum cured material that meets USP 87, 88 Class VI and USP 87, 88 CLASS VI, 3A. Silicone is almost an industry default and offers very low extractables (leaching characteristics). Rubber Fab's 1"-4" Type I gaskets are: FDA CFR 177.2600 FDA CFR 177.1550 U.S. Pharmacopeia Class VI Certification ADI Free(Animal Derived Ingredient Free) certified Manufactured according to cGMP Guidelines SKU 42RXPX-0375-FDA Back in Stock ETA Mar 29, 2024 Store Location (Aisle-Bay-Shelf) 0-CA1-D Brand Rubber Fab Certifications FDA Connection Type(s) Tri Clamp Connection Size(s) 3/8 in. Item Length 0.984 in. Item Width 0.984 in. Item Height 0.2 in. Material Silicone Warranty Yes FDA Approved Yes Color Clear Resources Chemical Resistance Chart,Rubber Fab Gasket Shelf Life
$3.55
Sight Glass Mini | Glass Replacement - 3/4 in. x 3 in.
Sight Glass Mini | Glass Replacement - 3/4 in. x 3 in. The core of the mini sight glass is the 5/16 in. bore glass tube that fits into the cage. This is the replacement for the glass only and does not include any gaskets, ends, or the cage body. The Female NPT 1/4 inch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. The Male JIC 1/4 inch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. Mini Sight Glass The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size.
$48.57
Sight Glass Mini | End - Tri Clamp 3/4 in. - SS304
Sight Glass Mini | End - Tri Clamp 3/4 in. - SS304 The Tri Clamp 3/4 inch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. Mini Sight Glass The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size. The Sight Glass Assembly - Instructions To build a complete sight glass you will need to Add to Cart the 3 main components: The Core Case + 3/4 in. Glass Tube Two (2) 3/8 inch gaskets of your choice (FKM, Silicone) Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different). Example: 1 x SGM-CORE-G075-003 (case + glass) 2 x 42MPSFY-0375-FDA (2 x FKM gaskets) 1 x SGM-END-GFN6 (female NPT) 1 x SGM-END-GMJ6 (male JIC)
$19.84
Sight Glass Mini | End - Tri Clamp 1 in. - SS304
Sight Glass Mini | End - Tri Clamp 1 in. - SS304 The Tri Clamp 1 in.ch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. Mini Sight Glass The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size. The Sight Glass Assembly - Instructions To build a complete sight glass you will need to Add to Cart the 3 main components: The Core Case + 3/4 in. Glass Tube Two (2) 3/8 inch gaskets of your choice (FKM, Silicone) Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different). Example: 1 x SGM-CORE-G075-003 (case + glass) 2 x 42MPSFY-0375-FDA (2 x FKM gaskets) 1 x SGM-END-GFN6 (female NPT) 1 x SGM-END-GMJ6 (male JIC)
$12.68
Sight Glass Mini | End - Male NPT 3/8 in. - SS304
Sight Glass Mini | End - Male NPT 3/8 in. - SS304 The Male NPT 3/8 inch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. Mini Sight Glass The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size. The Sight Glass Assembly - Instructions To build a complete sight glass you will need to Add to Cart the 3 main components: The Core Case + 3/4 in. Glass Tube Two (2) 3/8 inch gaskets of your choice (FKM, Silicone) Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different). Example: 1 x SGM-CORE-G075-003 (case + glass) 2 x 42MPSFY-0375-FDA (2 x FKM gaskets) 1 x SGM-END-GFN6 (female NPT) 1 x SGM-END-GMJ6 (male JIC) SKU SGM-END-NPT-GMN6 Store Location (Aisle-Bay-Shelf) 4-01R-C6 Brand Glacier Tanks Connection Type(s) MNPT Connection Size(s) 3/8 in. Warranty Yes Stainless Steel SS304
$23.80
Sight Glass Mini | End - Male NPT 1/4 in. - SS304
Sight Glass Mini | End - Male NPT 1/4 in. - SS304 The Male NPT 1/4 inch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. Mini Sight Glass The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size. The Sight Glass Assembly - Instructions To build a complete sight glass you will need to Add to Cart the 3 main components: The Core Case + 3/4 in. Glass Tube Two (2) 3/8 inch gaskets of your choice (FKM, Silicone) Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different). Example: 1 x SGM-CORE-G075-003 (case + glass) 2 x 42MPSFY-0375-FDA (2 x FKM gaskets) 1 x SGM-END-GFN6 (female NPT) 1 x SGM-END-GMJ6 (male JIC) SKU SGM-END-NPT-GMN4 Store Location (Aisle-Bay-Shelf) 4-01R-C5 Brand Glacier Tanks Connection Type(s) MNPT Connection Size(s) 1/4 in. Warranty Yes Stainless Steel SS304
$23.80
Sight Glass Mini | End - Male JIC 3/8 in. - SS304
Sight Glass Mini | End - Male JIC 3/8 in. - SS304 The Male JIC 3/8 inch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. Mini Sight Glass The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size. The Sight Glass Assembly - Instructions To build a complete sight glass you will need to Add to Cart the 3 main components: The Core Case + 3/4 in. Glass Tube Two (2) 3/8 inch gaskets of your choice (FKM, Silicone) Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different). Example: 1 x SGM-CORE-G075-003 (case + glass) 2 x 42MPSFY-0375-FDA (2 x FKM gaskets) 1 x SGM-END-GFN6 (female NPT) 1 x SGM-END-GMJ6 (male JIC) SKU SGM-END-JIC-GMJ6 Store Location (Aisle-Bay-Shelf) 4-01R-C2 Brand Glacier Tanks Connection Type(s) JIC Connection Size(s) 3/8 in. Warranty Yes Stainless Steel SS304
$23.80
Sight Glass Mini | End - Male JIC 1/4 in. - SS304
Sight Glass Mini | End - Male JIC 1/4 in. - SS304 The Male JIC 1/4 inch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. Mini Sight Glass The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size. The Sight Glass Assembly - Instructions To build a complete sight glass you will need to Add to Cart the 3 main components: The Core Case + 3/4 in. Glass Tube Two (2) 3/8 inch gaskets of your choice (FKM, Silicone) Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different). Example: 1 x SGM-CORE-G075-003 (case + glass) 2 x 42MPSFY-0375-FDA (2 x FKM gaskets) 1 x SGM-END-GFN6 (female NPT) 1 x SGM-END-GMJ6 (male JIC) SKU SGM-END-JIC-GMJ4 Store Location (Aisle-Bay-Shelf) 4-01R-C1 Brand Glacier Tanks Connection Type(s) JIC Connection Size(s) 1/4 in. Warranty Yes Stainless Steel SS304
$23.80
Sight Glass Mini | End - Female NPT 3/8 in. - SS304
Sight Glass Mini | End - Female NPT 3/8 in. - SS304 The Female NPT 3/8 inch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. Mini Sight Glass The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size. The Sight Glass Assembly - Instructions To build a complete sight glass you will need to Add to Cart the 3 main components: The Core Case + 3/4 in. Glass Tube Two (2) 3/8 inch gaskets of your choice (FKM, Silicone) Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different). Example: 1 x SGM-CORE-G075-003 (case + glass) 2 x 42MPSFY-0375-FDA (2 x FKM gaskets) 1 x SGM-END-GFN6 (female NPT) 1 x SGM-END-GMJ6 (male JIC) SKU SGM-END-NPT-GFN6 Store Location (Aisle-Bay-Shelf) 4-01R-C4 Brand Glacier Tanks Connection Type(s) FNPT Connection Size(s) 3/8 in. Warranty Yes Stainless Steel SS304 Quantity in stock 35
$19.84
Sight Glass Mini | End - Female NPT 1/4 in. - SS304
Sight Glass Mini | End - Female NPT 1/4 in. - SS304 The Female NPT 1/4 inch end is one of several adapters available with our mini inline sight glass. The 3/4 inch MNPT connection threads into the cage body sealing the gasket against the glass core. Each sight glass will support two same or different ends. Mini Sight Glass The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size. The Sight Glass Assembly - Instructions To build a complete sight glass you will need to Add to Cart the 3 main components: The Core Case + 3/4 in. Glass Tube Two (2) 3/8 inch gaskets of your choice (FKM, Silicone) Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different). Example: 1 x SGM-CORE-G075-003 (case + glass) 2 x 42MPSFY-0375-FDA (2 x FKM gaskets) 1 x SGM-END-GFN6 (female NPT) 1 x SGM-END-GMJ6 (male JIC) SKU SGM-END-NPT-GFN4 Store Location (Aisle-Bay-Shelf) 4-01R-C3 Brand Glacier Tanks Connection Type(s) FNPT Connection Size(s) 1/4 in. Warranty Yes Stainless Steel SS304
$19.84
Sight Glass Mini | Core - Cage Body + Glass - SS304
Sight Glass Mini | Core - Cage Body + Glass - SS304 The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size. The Sight Glass Assembly - Instructions To build a complete sight glass you will need to Add to Cart the 3 main components: The Core Case + 3/4 in. Glass Tube Two (2) 3/8 inch gaskets of your choice (FKM, Silicone) Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different). Example: 1 x SGM-CORE-G075-003 (case + glass) 2 x 42MPSFY-0375-FDA (2 x FKM gaskets) 1 x SGM-END-GFN6 (female NPT) 1 x SGM-END-GMJ6 (male JIC)
$86.75
FKM Gasket | Tri Clamp 3/8 in. (fits Sight Glass Mini) - FDA
FKM Gasket | Tri Clamp 3/8 in. (fits Sight Glass Mini) - FDA FKM is the short form for the fluoroelastomer category according to the American standard ASTM and is generally less expensive than its branded counterpart Viton®, however, FKM is not FDA approved. Both Viton® and FKM are made from the same fluoro rubber, and share the same high acid resistance and temperature range (-20°F - 400°F). Gaskets and Seals are non-returnable. SKU 42MPSFY-0375-FDA Store Location (Aisle-Bay-Shelf) 0-CA1-C Brand Rubber Fab Certifications FDA Connection Type(s) Tri Clamp Connection Size(s) 3/8 in. Item Length 0.984 in. Item Width 0.984 in. Item Height 0.2 in. Material FKM Warranty Yes FDA Approved Yes Color Black Resources Chemical Resistance Chart,Rubber Fab Gasket Shelf Life
$9.23
Order Protection
OrderProtection.com is offered as an additional item at checkout. There’s no extra application process or forms to fill out, customers just checkout and are instantly protected against items: Stolen Delivered Not Received Damaged Item Lost in Transit Wrong Item
$0.98 - $200.00
Check Valve | Tri Clamp 1.5 in. - SS316
Check Valve | Tri Clamp 1.5 in. - SS316 Check valves are an ideal solution along any Tri Clamp fitted system to mitigate backflow. Each Tri Clamp check valve is 3A certified to meet high sanitary standards, has a 1/2 PSI break pressure, and comes with an EPDM seal. Other Tri Clamp sizes are available per special order. SKU B45MP-R150 Store Location (Aisle-Bay-Shelf) 1-09R-F2 Brand Glacier Tanks Certifications 3A Connection Type(s) Tri Clamp Connection Size(s) 1.5 in. Item Length 4.5 in. Item Width 4 in. Item Height 4 in. Warranty Yes Stainless Steel SS316 Quantity in stock 146
$149.03
Diaphragm Valve | Tri Clamp 1.5 in. - SS316 / EPDM / PTFE
Diaphragm Valve | Tri Clamp 1.5 in. - SS316 / EPDM / PTFE Sanitary diaphragm valve are made from stainless steel SS316, and come with double gaskets: EPDM and PTFE. The sanitary design allows precise control of the fluid flow rate with low turbulence and minimal back pressure. SKU DV-R150-EPDM-PTFE Store Location (Aisle-Bay-Shelf) 1-05R-B2 Brand Glacier Tanks Connection Type(s) Tri Clamp Connection Size(s) 1.5 in. Material EPDM, PTFE Warranty Yes Stainless Steel SS316 Quantity in stock 48 Max Temp (C) Min Temp (C) Temp Limiting Material Pressure (Bar) Type of Valve 120 -30 PTFE 2 DIAPHRAGM
$176.22
You have seen 48 out of 58 products