Master Vapor Recovery Pumps

31 products


  • Master Vapor Pumps - MVP Recovery Pump - XL 150 PSI Shop All Categories Master Vapor Pumps

    Master Vapor Pumps - MVP Recovery Pump - XL 150 PSI

    Master Vapor Pumps - MVP Recovery Pump - XL 150 PSI   The Master Vapor Pump Model MVP-150XL is a certified gas recovery pump designed to operate at 150 PSI. It can handle over three times the volume of vapor as our standard MVP-150.  This pump is designed specifically for LP-Gas vapor recovery and is ideal for butane or butane / propane mixtures. Please note that this model of the MVP 150 only comes with Three-phase power options available.    Engineering Specifications: Recover LP-Gas vapor at OVER 18 CFM (cubic feet per minute) Recover butane at up to 4.5 LB/MIN (pounds per minute) Recover and re-condense butane between 35-50 GPH (gallons per hour) Electric motor: explosion proof for C1D1 hazardous areas; rated Class I Gr C & D, Class II Gr F&G Electric motor: 5 HP, 1800 RPM, 30 HZ Pump speed: 174 CPM (cycles per minute) at 60 HZ Size: 17.0” x 22.8” base x 46.4” tall Weight: 360.5 lb (163 kg)  All sales final  

    $18,480.00

  • Master Vapor MVP150 Explosion Proof Recovery Pump Shop All Categories Master Vapor Pumps Single Phase UL

    Master Vapor MVP150 Explosion Proof Recovery Pump

    Master Vapor MVP Recovery Pump - 150 PSI (This item may carry up to a 2-4 week lead time) (This item is limited to a maximum of 10% discount during sales) The Master Vapor Pump Model MVP-150-1PH is a certified gas recovery pump designed to operate at 150 PSI. This pump is designed specifically for LP-Gas vapor recovery and is ideal for butane or butane / propane mixtures.  Please note that the standard Single Phase and Three Phase models are UL Certified and that the ATEX Three Phase is CE Certified.  Engineering Specifications: Recover LP-Gas vapor at OVER 6 CFM (cubic feet per minute). Recover butane at up to 1.5 LB/MIN (pounds per minute) Recover and recondense butane at OVER 18 GPH (gallons per hour) Electric motor: explosion proof for C1D1 hazardous areas; rated Class I Gr C & D, Class II Gr F&G Electric motor: 2 HP, 3600 RPM, 60 HZ. Pump speed: 220 CPM (cycles per minute) at 60 HZ. Size: 17.0” x 19.9” base x 46” tall Weight: 182.5 lb (82.8 kg)   Motor Option: Model MVP-150-1PH : Single-phase: 115/208-230V, 20/10 FLA (full load amps) - UL Certification Model Model MVP-150-3PH : Three-phase: 208-230/460V, 5.2/2.6A FLA, Inverter-rated - UL Certification   Compliance Details: Compliant with NFPA and UL standards for C1D1 motors and LPG vapor recovery Meets Class 1 Division 1 hazardous area facility requirements (when installed correctly) One year manufacturer’s warranty (see Operation Manual) Made in the USA   Documentation: Product Manual Technical Data Sheet  Features and Benefits sheet 

    $12,580.00

  • Master Vapor MVP Liquid Recovery Pump Shop All Categories Master Vapor Pumps Model MVP Liquid 3 ph Inverter rated

    Master Vapor MVP Liquid Recovery Pump

    Master Vapor MVP Liquid Recovery Pump  THE NEW LIQUID Pumps solvent in liquid state Hydrocarbon and ethanol compatible C1D1 and 3rd party Certified Drastically increases evaporation byexpanding surface area andcreating turbulence Electric Driven FDA Food Grade Compliant MADE IN THE USA   Engineering Specifications: Maximum pumping outlet pressure - 70 PSI Center Section CO2 charge range 5 to 80 PSI(10-15psi over inlet pressure recommended) CO2 Inlet Size: 1 /4 in. npt(f) Maximum Pump Speed 135 cpm (cycle per minute) Process Inlet and Outlet Size: 1 in. npt  Electric Motor: Explosion proof for C101 Hazardous areas Motor Specifications: 2HP, 3,600 rpm, 60Hz Size: 18.3” x 15.4” base x 42.3” tall Weight: 173.2 lb  All sales final Technical Data sheet US Metric Maximum Pumping outlet Pressure 70 PSI 0.48 MPa, 4.8 bar Center section CO2 Change range 6 to 80 PSI 0.03-0.55 MPa 0.3-5.5 bar Equipment Withstand Pressure 350 PSI 2.41 MPa, 24.1 bar Maximum CO2 Consumption <0.2 scfh <0.006 cubic meters/hour CO2 inlet size 1/4 in. npt(f) Maximum Pump Speed 135 cpm Process intel and outlet size 1 in. npt Model MVP Liquid, 3 ph, Inverter Rated Power 2 HP 1.5kW Speed 3600 rp, (60 Hz) Gear Ratio 25.85 Voltage 1-phase 208-230/460V Maximum Amperaage Load 5.2 A (230V / 2.6 A (460V) Model MVP Liquid 1PH Power 2 HP 1.5kW Speed 3600 rpm (60 Hz) Gear Ratio 25.85 Maximum Amperaage Load 5.2 A (115V / 10 A (230V) Noise Data Sound Power (measured per ISO-9614-2 88.5 dBa Sound Pressure {Tested 3.28ft (1m) From Equipment} 80.5dBa Materials Process Pressure Section and Reed Valves Stainless Steel Diaphragms Standard: FKM Fluoroelastomer Optional:PTFE Process Vapor Temperature Range FKM: -40 to 275 °F (-40 to 135 C)PTFE: +40 to 220 °F 9+4 to 104 C

    $13,700.00 - $14,250.00

  • Sale -24% Refurbished MVP Liquid 1PH Shop All Categories Master Vapor Pumps

    Refurbished MVP Liquid 1HP

    Refurbished MVP Liquid 1HP   ***NOTE: Refurbished products are 100% re-tested at our warehouse to be fully functional. The customer acknowledges that by buying a refurbished product the item may have imperfections or slight damage to the product such as: Major/Minor Scratches Major/Minor Dents Smells or Odors (Cleaned as much as possible at warehouse)   THE NEW LIQUID Pumps solvent in liquid state Hydrocarbon and ethanol compatible C1D1 and 3rd party Certified Drastically increases evaporation byexpanding surface area andcreating turbulence Electric Driven FDA Food Grade Compliant MADE IN THE USA   Engineering Specifications: Maximum pumping outlet pressure - 70 PSI Center Section CO2 charge range 5 to 80 PSI(10-15psi over inlet pressure recommended) CO2 Inlet Size: 1 /4 in. npt(f) Maximum Pump Speed 135 cpm (cycle per minute) Process Inlet and Outlet Size: 1 in. npt  Electric Motor: Explosion proof for C101 Hazardous areas Motor Specifications: 2HP, 3,600 rpm, 60Hz Size: 18.3” x 15.4” base x 42.3” tall Weight: 173.2 lb  All sales final     Technical Data sheet US Metric Maximum Pumping outlet Pressure 70 PSI 0.48 MPa, 4.8 bar Center section CO2 Change range 6 to 80 PSI 0.03-0.55 MPa0.3-5.5 bar Equipment Withstand Pressure 350 PSI 2.41 MPa, 24.1 bar Maximum CO2 Consumption <0.2 scfh <0.006 cubic meters/hour CO2 inlet size 1/4 in. npt(f) Maximum Pump Speed 135 cpm Process intel and outlet size 1 in. npt Model MVP Liquid, 3 ph, Inverter Rated Power 2 HP 1.5kW Speed 3600 rp, (60 Hz) Gear Ratio 25.85 Voltage 1-phase 208-230/460V Maximum Amperaage Load 5.2 A (230V / 2.6 A (460V) Model MVP Liquid 1PH Power 2 HP 1.5kW Speed 3600 rpm (60 Hz) Gear Ratio 25.85 Maximum Amperaage Load 5.2 A (115V / 10 A (230V) Noise Data Sound Power (measured per ISO-9614-2 88.5 dBa Sound Pressure {Tested 3.28ft (1m) From Equipment} 80.5dBa Materials Process Pressure Section and Reed Valves Stainless Steel Diaphragms Standard: FKM FluoroelastomerOptional:PTFE Process Vapor Temperature Range FKM: -40 to 275 °F (-40 to 135 C)PTFE: +40 to 220 °F 9+4 to 104 C

    $8,500.00$6,500.00

  • Master Vapor MVP Recovery Pump - 60 PSI Shop All Categories Master Vapor Pumps Single Phase

    Master Vapor MVP Recovery Pump - 60 PSI

    Master Vapor MVP Recovery Pump - 60 PSI    The Master Vapor Pump Model MVP-6CFM is a certified gas recovery pump designed to operate at 60 PSI. This pump is designed specifically for LP-Gas vapor recovery and is ideal for butane or butane / propane mixtures.  Engineering Specifications: Recover LP-Gas vapor at OVER 6 CFM (cubic feet per minute) Recover butane at up to 1 LB/MIN (pounds per minute) Recover and recondense butane at OVER 12 GPH (gallons per hour) Electric motor: explosion proof for C1D1 hazardous areas; rated Class I Gr C & D, Class II Gr F&G Electric motor: 1 HP, 1800 RPM, 60 HZ Pump speed: 190 CPM (cycles per minute) at 60 HZ Size: 17.0” x 19.9” base x 46” tall Weight: 182.5 lb (82.8 kg) Motor Option: Model MVP-6CFM-1PH: Single-phase: 115/208-230V, 13.4/6.7 FLA (full load amps) Model MVP-6CFM-3PH: Three-phase: 208-230/460V, 3.3/1.65 FLA, Inverter-rated Documentation: Product Manual  Technical Data Sheet  Features and Benefits Sheet 

    $9,370.00 - $9,380.00

  • Enclosed Motor Switch Hazardous-Location - UL Listed / CSA Certified for MVP Recovery Pumps New Products BVV

    Enclosed Motor Switch Hazardous-Location - UL Listed / CSA Certified for MVP Recovery Pumps

    Enclosed Motor Switch Hazardous-Location - UL Listed / CSA Certified for MVP Recovery Pumps This motor switch is designed for hazardous environments where ignitable gas and dust may be present. They're rated NEMA 7 and 9 for hazardous locations. Use them to turn motors on and off, or with other circuits such as lighting and electric heat circuits. They do not provide overload protection. This item also includes a 1" Male x 3/4" Female NPSM bushing and 1/2" Pipe nipple for steel conduit.   Specifications Switch Type Motor Control Reversing Capability Nonreversing Number of Circuits Controlled 2 Electrical Phase (hp) Single (3 hp @ 240 V AC) Switch Starting Position 2 Off (Normally Open) Switch Action Stays Switched (Maintained) Industry Designation DPST-NO Switching: Current 30 A Voltage 600V AC Housing: Material Painted Aluminum Color Gray Height 6.5" Width 3" Depth 4.3" Number of Mounting Holes 2 Mounting Hole Diameter 0.31" Mounting Fasteners Included No Wire Connection Type Screw Terminals Environment Hazardous Location Environment Rating NEMA 7, NEMA 9 Specifications Met UL Listed, CSA Certified RoHS Not Compliant REACH Not Compliant DFARS Specialty Metals COTS-Exempt Country of Origin Mexico

    $400.00

  • MVP 6CFM 60 PSI Check Valve Replacement Kit Shop All Categories Mastor Vapor Pumps

    MVP 6CFM 60 PSI Check Valve Replacement Kit

    MVP 6CFM 60 PSI Check Valve Replacement Kit This is a replacement check valve kit for the MVP 6CFM Explosion Proof Recovery Pump. It comes with 4 replacement O-rings, 4 replacement screws and 4 replacement shims. All sales final  

    $71.25

  • MVP - Fuego 240v Heater - Ethanol Shop All Categories Master Vapor Pumps

    MVP - Fuego 240v Heater - Ethanol

    MVP - Fuego 240v Heater - Ethanol All sales final

    $4,995.00

  • Pump Part - MVP - Liquid - Gear Reducer Shop All Categories Master Vapor Pumps

    Pump Part - MVP - Liquid - Gear Reducer

    Pump Part - MVP - Liquid - Gear Reducer All sales final

    $2,150.00

  • Pump Part - MVP - Liquid - Center Section Shop All Categories Master Vapor Pumps

    Pump Part - MVP - Liquid - Center Section

    Pump Part - MVP - Liquid - Center Section All sales final

    $1,750.00

  • Pump Part - MVP - Liquid - Manifold Assembly Kit Shop All Categories Master Vapor Pumps

    Pump Part - MVP - Liquid - Manifold Assembly Kit

    Pump Part - MVP - Liquid - Manifold Assembly Kit All sales final

    $1,600.00

  • Pump Part - MVP - Liquid - Fluid Cover Kit Shop All Categories Master Vapor Pumps

    Pump Part - MVP - Liquid - Fluid Cover Kit

    Pump Part - MVP - Liquid - Fluid Cover Kit All sales final

    $1,360.00

  • Pump Part - MVP - 60 PSI & Liquid - Shaft Assembly Kit Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI & Liquid - Shaft Assembly Kit

    Pump Part - MVP - 60 PSI & Liquid - Shaft Assembly Kit All sales final

    $1,260.00

  • Pump Part - MVP - 150 PSI & Liquid - Stand Legs Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 150 PSI & Liquid - Stand Legs

    Pump Part - MVP - 150 PSI & Liquid - Stand Legs All sales final     

    $630.00

  • Pump Part - MVP - 60 PSI, 150 PSI, & Liquid - Diaphragm Replacement Shop All Categories Master Vapor Pumps PTFE

    Pump Part - MVP - 60 PSI, 150 PSI, & Liquid - Diaphragm Replacement

    Pump Part - MVP - 60 PSI, 150 PSI, & Liquid - Diaphragm Replacement All sales final

    $385.00 - $602.00

  • Master Vapor MVP-150XL Diaphragm Shop All Categories Master Vapor Pumps

    Master Vapor MVP-150XL Diaphragm

    Master Vapor MVP-150XL Diaphragm Diaphragm replacement kit for use with the MVP-150XL recovery pump. Unit of Measure: EA Height: 2 IN   |  5.08 CM Length: 12 IN   |  30.48 CM Width: 12 IN   |  30.48 CM Volume: .167 FT3   |  .005 M3 Chargeable Weight: 2.58 LBS  | 1.17 KG

    $399.00

  • Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - CO2 Regulator Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - CO2 Regulator

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - CO2 Regulator All sales final

    $389.00

  • Pump Part - MVP - 60 PSI & Liquid - Alignment Housing Kit Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI & Liquid - Alignment Housing Kit

    Pump Part - MVP - 60 PSI & Liquid - Alignment Housing Kit All sales final

    $304.00

  • Pump Part - MVP - 150 PSI & Liquid - Stand Bracket Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 150 PSI & Liquid - Stand Bracket

    Pump Part - MVP - 150 PSI & Liquid - Stand Bracket All sales final

    $270.50

  • Pump Part - MVP - Liquid - Stainless Steel - Ball & O-Ring Set Shop All Categories Master Vapor Pumps

    Pump Part - MVP - Liquid - Stainless Steel - Ball & O-Ring Set

    Pump Part - MVP - Liquid - Stainless Steel - Ball & O-Ring Set All sales final

    $249.00

  • Pump Part - MVP - Liquid - Stainless Steel Seat Shop All Categories Master Vapor Pumps

    Pump Part - MVP - Liquid - Stainless Steel Seat

    Pump Part - MVP - Liquid - Stainless Steel Seat All sales final

    $239.50

  • Pump Part - MVP - Liquid - Check Valve Kit Shop All Categories Master Vapor Pumps

    $226.00

  • Pump Part - MVP - 60 PSI, 150 PSI, & Liquid - SS&S - Fluid Plate Kit Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI, 150 PSI, & Liquid - SS&S - Fluid Plate Kit

    Pump Part - MVP - 60 PSI, 150 PSI, & Liquid - SS&S - Fluid Plate Kit All sales final

    $205.50

  • Pump Part - MVP - Liquid - Viton Seat Shop All Categories Master Vapor Pumps

    Pump Part - MVP - Liquid - Viton Seat

    Pump Part - MVP - Liquid - Viton Seat All sales final

    $120.50

  • Pump Part - MVP - 60 PSI & Liquid - Spider Coupler Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI & Liquid - Spider Coupler

    Pump Part - MVP - 60 PSI & Liquid - Spider Coupler All sales final

    $132.00

  • Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - Fill/Vent Fitting Kit Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - Fill/Vent Fitting Kit

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - Fill/Vent Fitting Kit All sales final     

    $132.20

  • Pump Part - MVP - Shaft Seal Kit Shop All Categories Master Vapor Pumps 60 PSI & Liquid

    Pump Part - MVP - Shaft Seal Kit

    Pump Part - MVP - Shaft Seal Kit All sales final     

    $121.50 - $418.00

  • Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - Diaphragm Cover Bolts - 8 pack Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - Diaphragm Cover Bolts - 8 pack

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - Diaphragm Cover Bolts - 8 pack All sales final     

    $96.25

  • Pump Part - MVP - 60 PSI & Liquid - Access Cover Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI & Liquid - Access Cover

    Pump Part - MVP - 60 PSI & Liquid - Access Cover All sales final     

    $61.25

  • Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - PTFE CO2 Regulator Gasket Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - PTFE CO2 Regulator Gasket

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - PTFE CO2 Regulator Gasket All sales final     

    $6.00

  • Pump Part - MVP - 60 PSI, 150 PSI & Liquid - Cap Screw - Hex Head - M6x16mm Shop All Categories Master Vapor Pumps

    Pump Part - MVP - 60 PSI, 150 PSI & Liquid - Cap Screw - Hex Head - M6x16mm

    Pump Part - MVP - 60 PSI, 150 PSI & Liquid - Cap Screw - Hex Head - M6x16mm All sales final

    $5.50

Login

Forgot your password?

Don't have an account yet?
Create account