Triclamp Parts
150 Liter Collection Vessel with Internal Coil, Coned Bottom, and Baffle in Jacket
150 Liter Collection Vessel with Coned Bottom and Baffle in Jacket (Note: this unit comes bare and does not include any fittings besides the legs with casters.) ***Note: This item will ship via freight ONLY. This massive 304 Stainless Steel Jacketed vessel can hold up to 150L of water (~40 gallons) and multiple connections on top of the vessel and lid. The outer jacket has large ports to allow the circulation of heat transfer fluids and can also be used a vacuum jacket and can hold 21.5L or 5.68 gallons of fluid in the outer jacket. This unit also features 4 stainless steel legs with locking casters to allow the vessel to be moved around easily. This Vessel is rated to 100 PSI MAX
$3,200.00$2,250.00
6" Spool with 4" Tapered Funnel and KF40 Vac Port
This Tri clamp adapter piece can allow you to hook up a vacuum line to a tri clamp column and shielding the vacuum line from and falling liquids or oils. These are commonly used in falling film recovery applications.
$212.00
6" x 4" x 3" x (2) 1/4" FNPT Tri-Clamp Skylight
Specifications: 304 Grade Stainless Steel Reducer 'Skylight' w/ High Polish interior 6" Triclamp x 4" Triclamp x 3" Triclamp (Can be used as viewport to see inside) x (2)1/4" FNPT 7" Tall
$140.00
Tef-Flex PTFE / EPDM Unitized Sanitary Tri-Clamp Gasket
Tef-Flex Sanitary Tri-Clamp Gasket Tef-Flex: A Tef-Flex sanitary gasket’s contact surface is a layer of PTFE grafted to an EPDM rubber inner core. This totally bonded construction provides an exceptionally pure and incredibly flexible seal. By grafting the elastomer with a layer of PTFE, Tef-Flex will behave like an elastomer but will prevent product contamination, service interruptions and clean-up costs associated with traditional elastomer seals. The PTFE grafted elastomer in a Tef-Flex sanitary gasket will maintain I.D. without re-torquing or leaking. Key Features: Excellent resistance to almost all chemicals Excellent Temperature Range Excellent Cleanability due to PTFE (Teflon) Excellent Flexibility Sizes Available: 1.5" 2" 2.5" 3" 4" Chemical Compatibility: Butane A - Excellent Propane (liquified) A - Excellent Alcohols: Amyl A - Excellent Benzyl A - Excellent Butyl A - Excellent Diacetone A - Excellent Ethyl A - Excellent Hexyl A - Excellent Isobutyl A - Excellent Isopropyl A - Excellent Methyl A - Excellent Octyl A - Excellent Propyl A - Excellent Disclaimer: BVV Recommends no more than a -40F Operating Temperature and is not responsible for the user running their system with incompatible chemicals.
$19.00 - $46.00
Jacketed Collection Spool
8"x 52" Jacketed Collection Spool This spool is 8" in diameter x 52" in length with 4" Tri-Clamp ports on either end. The top has 1/4" and 1/2" NPT ports to add a gauge and pressure relief directly to the vessel. The spool has a closed jacket with 1/2" NPT ports that make this spool ideal to use as a collection tank on a rack-mounted system.
$1,100.00$600.00
1/2" Compression End Cap 1.5" Triclamp
1/2" BVV Compression End Caps These End Caps come with a 1/2" Female Compression connection welded to the end cap with a sanitary weld. They allow the user to adapt and connect a 1/2" male tube stub connection to the lid. Specifications Material 304 Stainless Steel Connection Type: Tri-Clamp 1/2" Female Compression Connection Standard: 3A
$58.00
12" Hemispherical Extractor Lid with 6" Triclamp Center
12" Hemispherical Extractor Lid with 6" Triclamp Center This End Cap comes with Four FNPT Threaded connections, two 2" Tri-Clamp ferrules welded to the end cap, and a 6" Tri-Clamp center port. They allow the user to adapt and connect threaded connections to the NPT ports and Tri-Clamp lid connections to the others. These 7 connections are welded on a 12" Hemispherical Tri-Clamp End Cap. Specifications Material: 304 Stainless Steel Connection Types: 2" Tri-Clamp (2x) 6" Center Tri-Clamp Port 12" Tri-Clamp 1/4" - 18 FNPT (x2) 1/2" - 14 FNPT (x2) Standard: 3A
$300.00
Jacketed Collection Column (6in Tri clamps)
This column can be used as a collection or solvent vessel for a larger rack mounted extractor. The top and bottom tri clamp size are 6" to allow for a higher pressure rating on the entire vessel. The jacket of the vessel is baffled and has 1/2" NPT ports to run fluid through for good temperature control. This column is intended to hold 55lbs of hydrocarbon solvent, it can be rack mounted with 12" pipe hangers. Max Pressure: 300psi @70°F (dependent on clamp used) Material: 304 Stainless Steel Capacity: 55 Liters Height: 48"
$1,800.00
Triclamp T
Sanitary Tri-Clamp Tee – 304 Stainless Steel (3A Certified) Upgrade your sanitary processing system with BVV’s high-quality Tri-Clamp Tees, precision-engineered from 304 stainless steel for superior corrosion resistance and long-lasting performance. Manufactured in accordance with 3A sanitary standards, these tees are ideal for use in food, beverage, pharmaceutical, and botanical extraction applications. ✅ 3-Way Tee Design for optimal flow distribution✅ High-Polish 304 Stainless Steel – Durable, hygienic, easy to clean✅ Available Sizes: 1.5", 2", and 6" Tri-Clamp connections✅ Compatible with standard Tri-Clamp fittings, gaskets, and clamps✅ Ideal for sanitary process piping, closed-loop extraction, and lab builds BVV’s Tri-Clamp fittings are trusted by industry professionals for their precision, quality, and performance. Whether you’re building out a new system or upgrading your existing setup, our Tri-Clamp Tees deliver reliability where it matters most.
$25.00 - $200.00
Tri-Clamp Neoprene Insulation Sleeve by BVV
BVV Neoprene Insulation Sleeve's Our Insulation sleeves are made from 3mm durable Neoprene Scuba Fabric and has a rated insulation value of R 1.5 These sleeves are 90% polyester and 10% spandex which makes all of these a snug fit around the spools. The material weighs in at 350 grams per square meter and has a smooth finish and a double stitched side seam. The sleeves can be easily cut with scissors and modified to add custom cutouts. The sleeves are also reversible and the inside color is black. Note: *Customers who order De-Wax or Fully Jacketed spool sleeves will not have pre-cut holes for the side ports. But fear not this material cuts very easily with sharp cutting tools, and you can easily add the small holes for these ports. BVV's Tested Temperatures: -80°C to 105°C (-112°F to 220°F) we have not tested beyond these temperature, it doesn't mean it not capable its just untested by BVV.
$5.83 - $57.81
You have seen 154 out of 154 products