Shop Equipment

Lighting (6)

Pre-Processing (28)

Extraction (77)

Filtration (76)

Solvent Recovery (23)

Drying & Purging (231)

Distillation (126)

Isolation (29)

Infusion (43)

Temperature Control (124)

 

Show previous products

• 

  Quantity Add to cart

  Truffly Made - Compact Universal Depositor

  Compact Universal Depositor   This Compact Universal Depositor comes with a digital control unit to regulate the temperature from 70F to 300F,  4 adjustable nozzles and a 3 liters / 3.15 quart hopper. It has been designed to work with most of the standard molds on the market, including silicone and polycarbonate products. Use your existing molds or simply adjust molds to fit. Maximum mold size that can fit is 6.5 x 15 inches. Ideal for Gelatin and Pectin gummy. Certified to work with LorAnn Oils Gummy MixCertified to work with Melt To Make™Certified to work with Candy Pros The Compact Universal Depositor delivers accurately metered fillings to the gram with great flexibility.Stainless steel construction with POM case. Four adjustable depositing nozzles, which can be easily positioned or removed to work with any mold layout.   Compact Tabletop Confectionery Depositor 3 Liters The Truffly Made Compact Universal Depositor is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. The Compact Universal Depositor heats for chocolate, gummies and candy Easily adjustable shot size to the exact gram. 3 Liters / 3.15 qt. Hopper Size The four nozzles have adjustable centerlines to accommodate various mold configuration. Nozzles are removable to accommodate molds with less cavities. The heated pistons and hopper maintain temperature and flow. Bottom Hopper heated through pistons while lever bar is down. Front Hopper heated through a heating panel Hygienic stainless steel construction, metal nozzles, POM case. Adjustable temperature digital control panel. The Depositor can work with molds up to 6.5 inches wide. Made in Germany. The complete machine may be disassembled without tools for easy cleaning. Specifications Width:  9.75” Length:  16.5” Height:  11.5” Weight:  23 lbs Hopper Capacity:  3.15 quarts/ 3 Liters Filling Capacity: 1,000+ hourly Power:  110v – 240v Molds up to:  6.5″ wide Material:  Stainless Steel/POM Heat Settings: 70F / 21C to 300F / 150C Guarantee:  12 Months from date of purchase.

  Read more less

  $5,248.00

  Quantity Add to cart

• 

  View options

  Truffly Made - Automatic Depositor 20L

  Automatic Depositor 20L   The Automatic Depositor comes with the 20 liters hopper with heated panels for chocolate, gummy, caramel and hard candy.10 depositing pistons for maximum efficiency and productivity; Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout.Touchscreen Unit Control that allow you to set the required temperature and volume before and during live production.This depositor is designed to work with all the Truffly Made silicone molds and most polycarbonate molds, it delivers accurately metered fillings with great flexibility and can deposit 10,000+ pieces per hour. This system is designed to work with all Truffly Made silicone molds, as well non-Truffly Made molds (Programming fee applies), it delivers accurately metered fillings with great flexibility and can deposit 10,000+ pieces per hour. REMELTING PRODUCT SUCH AS “Albanese Gummies®” IS NOT COMPATIBLE WITH THIS SYSTEM DUE TO VISCOSITY BEING TOO HIGH. For a Professional and Certified remelting process please refer to: – LorAnn Oils Gummy Mix– Melt To Make™– Candy Pros Automatic Confectionery Depositor Truffly Made Automatic Universal Candy Depositor For Gummies, Caramel, Hard Candy: The Truffly Made,  Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery ingredients such as chocolate and ganache, as well as high heat candy ingredients such as caramel, gummies and hard candy. The Automatic Depositor has a large 20L hopper with heated panels Easily adjustable shot size control. Ten nozzles have adjustable centerlines to accommodate various mold configurations. The Automatic Depositor works with molds up to 11.5 inches wide and 15 inches long. Nozzles are removable to accommodate molds with less cavities. Heated panels help chocolate, caramel or gummy products maintain temperature to flow properly. Variable temperature control through Touchscreen Unit Control 40mm L nozzles Compact, space saving design CE certified Made in Germany. The Automatic  Depositor ships with: 10 pistons assembly Complete Heating System 40mm L nozzles stainless steel 20L hopper with cover stainless steel balls stainless steel pallet carrier spare o-rings Width:  19.0” Length:  27.5” Height:  22.5” Weight:  143 lbs Dosage : 1.5 to 7 ml / 0.05 to 0.20 fl oz per pull Accuracy: 0.1 gram / 0.003 fl oz. Capacity : 5.3 gal / 20 liter Filling Capacity: 10,000+ hourly Power Input : 100-240V AC  /  50-60Hz Power Output : 24V DC / max.600W Material: Stainless Steel Maximum Heat : 302°F / 150°C Guarantee:  12 Months from date of purchase. The complete Automatic Depositor can be disassembled without tools for cleaning purposes. Technical Specs

  Read more less

  $36,740.00 - $38,740.00

  View options

• 

  View options

  Truffly Made - Universal Candy Demolder

  Universal Candy Demolder Universal Candy Demolder is designed to remove a full sheet of candies from molds in one “pop”. Demold your trays in second! Ideal for Hard Candies, Gummies, Caramels, Chocolate and Fruit Jelly! The mold “Popper” includes one standard mold frame to match the mold you are using. Please note that the mold is not included. Custom mold plates are available for additional 911 USD to work with your silicone molds. Dimensions:  19.75” w x 19.25” L x 8.25” H The Universal Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities. Maximum cavities per mold = 80 Maximum Mold size = 11.5 x 15” Please contact info@trufflymade.com for a custom quote LARGE PIN FITTINGS AVAILABLE HERE ☜ Please select the type of mold you are using from the list, All Truffly Made molds listed are compatible with the demolder. For any silicone mold not listed, or is from a different manufacturer, please contact us before placing an order to verify compatibility. The Truffly Made Universal Demolder. Easy to use, just one pull to pop out a full mold sheet of candies. Works best if the candies are cooled off and hardened! Select the mold frame that matches the mold you are using. Place the mold frame on to the Demolder. Add your filled mold on top of frame. Pull lever. DONE! All your candies are demolded. PLEASE NOTE THAT THE UNMOLDING EFFICIENCY IS VARIABLE DEPENDING ON PRODUCT STICKINESS. WE RECOMMAND TO UNMOLD WITHIN 3 HOURS AFTER DEPOSITNG FOR BETTER EFFICIENCY. SILICONE MOLDS CAN BE PRE-COATED USING MCT OIL , MINERAL OIL OR COOKING SPRAY TO INCREASE UNMOLDING EFFICIENCY.

  Read more less

  $3,140.00 - $3,901.00

  View options

• 

  Quantity Add to cart

  Truffly Made - Semi-Automatic Depositor - Push & Go

  Semi-Automatic Depositor - Push & Go Ideal for novice and experienced operators! The 8 Pistons Semi-Automatic Candy Depositor for chocolate, gummies, taffy, caramel and hard candy is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. The Semi-automatic Depositor comes with a complete heating system with temperatures ranging from 68F to 320F. Filling Capacity: 5,000 – 8,000+ hourly Semi-Automatic 8 Pistons Tabletop Confectionery Depositor Truffly Made Semi-Automatic Candy Depositor For Gummies, Caramel, Hard Candy. The Truffly Made, Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery ingredients such as chocolate and ganache, as well as high heat candy ingredients such as caramel, gummies and hard candy. The Universal Candy Depositor comes with the hopper with heated panels. This Confectionery Depositor has a large hopper with heated panels Easily adjustable shot size control. Eight nozzles have adjustable centerlines to accommodate various mold configurations. The Semi-Automatic Depositor works with molds up to 11.5 inches wide. Nozzles are removable to accommodate molds with less cavities. Heated panels help chocolate, caramel or gummy products maintain temperature to flow properly. Variable temperature control Heavy Duty nozzles Compact, space saving design CE certified Made in Germany. The Universal Semi-Automatic Candy Depositor ships with: 8 piston assemblies Complete Heating System Heavy Duty nozzles stainless steel hopper with cover stainless steel balls aluminum pallet carrier spare o-rings Specifications Width:  18.75” Length:  26.5” Height:  17.5” Weight:  88 lbs Dosage : 1.5 to 7 ml / 0.05 to 0.20 fl oz per pull Capacity : 3.2 gal / 12 liter Filling Capacity: 5,000 - 8,000+ hourly Power Input : 100-240V AC  /  50-60Hz Power Output : 24V DC / max.600W Material: Stainless Steel Maximum Heat : 320°F / 160°C Warranty:  12 Months from date of purchase. The complete Universal Semi-Automatic Depositor can be disassembled without tools for cleaning.

  Read more less

  $20,906.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Universal Depositor XL

  Universal Depositor XL   he XL Universal Candy Depositor comes with the extra large hopper with heated panels for gummies and hard candies is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with eight adjustable depositing nozzles that can be easily positioned to each mold layout. Comes with 8 Pistons setup with Heavy Duty Nozzles Tabletop XL Confectionery Depositor Truffly Made XL Universal Candy Depositor For Gummies, Caramel, Hard Candy. The Truffly Made, XL Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery ingredients such as chocolate and ganache, as well as high heat candy ingredients such as caramel, gummies and hard candy. This Confectionery Depositor has a extra large 12 liter/3.2 gal hopper with heated panels Easily adjustable shot size control. Eight nozzles have adjustable centerlines to accommodate various mold configurations. The Universal Depositor works with molds up to 11.5 inches wide. Nozzles are removable to accommodate molds with less cavities. Heated panels help chocolate, caramel or gummy products maintain temperature to flow properly. Digital, variable temperature control Additional pistons and nozzles available Heavy Duty nozzles Compact, space saving design CE certified Made in Germany. The Universal Candy Depositor ships with: 8 piston assembly Complete Heating System Heavy Duty nozzles stainless steel XL hopper with cover stainless steel balls aluminum pallet carrier spare o-rings service pack Specifications Width:  15.75” Length:  20.5” Height:  17.5” Weight:  49 lbs Dosage : 1.5 to 7 ml / 0.05 to 0.20 fl oz per pull Capacity: 3.2 gal / 12 liter Filling Capacity: 5,000+ hourly Power Input : 100-240V AC  /  50-60Hz Power Output : 24V DC / max.600W Material: Stainless Steel Maximum Heat : 320°F / 160°C Guarantee:  12 Months from date of purchase. The complete XL Universal Depositor can be disassembled without tools for cleaning.  

  Read more less

  $16,273.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Universal Depositor 6L

  Universal Depositor 6L     The Universal Candy Depositor for gummies and hard candies is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. The Universal Candy Depositor comes with the hopper with heated panels. Comes with 8 Pistons setup with Heavy Duty Nozzles Tabletop Confectionery Depositor The Truffly Made, Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery ingredients such as chocolate and ganache, as well as high heat candy ingredients such as caramel, gummies and hard candy. The Universal Candy Depositor comes with the hopper with heated panels. This Confectionery Depositor has a large hopper with heated panels Easily adjustable shot size control. Eight nozzles have adjustable centerlines to accommodate various mold configurations. The Universal Depositor works with molds up to 11.5 inches wide. Nozzles are removable to accommodate molds with less cavities. Heated panels help chocolate, caramel or gummy products maintain temperature to flow properly. Digital, variable temperature control Additional pistons and nozzles available Heavy Duty nozzles Compact, space saving design CE certified Made in Germany. The Universal Candy Depositor ships with: 8 Pistons assembly Complete Heating System Heavy Duty nozzles stainless steel hopper with cover stainless steel balls aluminum pallet carrier spare o-rings Specifications Width:  15.75” Length:  20.5” Height:  14.5” Weight:  49 lbs Dosage : 1.5 to 7 ml / 0.05 to 0.20 fl oz per pull Capacity : 1.3 gal / 6 liter Filling Capacity: 2,000+ hourly Power Input : 100-240V AC  /  50-60Hz Power Output : 24V DC / max.600W Material: Stainless Steel Maximum Heat : 320°F / 160°C Guarantee:  12 Months from date of purchase. The complete Universal Depositor can be disassembled without tools for cleaning. Instructions for Use

  Read more less

  $13,123.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Gumdrop 80 Mold

  Gumdrop 80 Mold Candy Mold Specifications: 3.0ml Gumdrop Mold – 80 CavitiesReference: TM-GD-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 10 x 8Cavities Per Mold: 80Cavity Size:  20 x 18 x 12 mm   (0.78″ x  0.70″ x 0.47” )Cavity volume: 3.0 mL  (0.10 fl oz)Approximate Weight: 3.5 – 4.0 grams (0.12 – 0.14 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

  Read more less

  $74.68

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Flat Pin Fittings for Universal Demolder - 80 Count

  Flat Pin Fittings for Universal Demolder - 80 Count The pin fittings can be added on the original pins of the Universal Candy Demolder to increase the diameter and improve efficiency of unmolding with larger cavity size molds such as Button 80, Diamond 80, Rounded Triangle 80, or custom molds.Food contact safe and easy to clean using dish soap and hot water. Pins fittings are easy to add on and can be removed for cleaning purposes. Pack of 80 Pin Fittings Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

  Read more less

  $306.34

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Drop 80 Mold

  Drop 80 Mold Candy Mold Specifications: 1.85ml Drop Mold – 80 CavitiesReference: TM-DP-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 10 x 8Cavities Per Mold: 80Cavity Size:  12.5 x 14 mm Ø  (0.49″ x  0.55” Ø)Cavity volume: 1.85 mL  (0.06 fl oz)Approximate Weight: 2.0 – 2.5 grams (0.07 – 0.09 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

  Read more less

  $74.68

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Dice 80 Mold

  Dice 80 Mold Candy Mold Specifications: Reference: TM-DC-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 8 x 10Cavities Per Mold: 80Cavity Size:   15 x 15 x 15 mm (19/32 x 10/32 x 19/32″)Cavity volume:  3.5 mL  (0.12 fl oz)Approximate Weight: 4 – 4.5 grams (0.14 – 0.16 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.  

  Read more less

  $74.68

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Diamond 80 Mold

  Diamond 80 Mold Candy Mold Specifications: Reference: TM-DD-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 8 x 10Cavities Per Mold: 80Cavity Size:   10 x 15 x 20 mm (0.39″ x 0.59″ x 0.79″)Cavity volume:  2.0 mL  (0.07 fl oz)Approximate Weight: 2.5 – 3 grams (0.08 – 0.11 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

  Read more less

  $74.68

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Classic Round 80 Mold

  Classic Round 80 Mold Reference: TM-RD-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 8 x 10Cavities Per Mold: 80Cavity Size:  27 dia x 22 mm (1.06 dia x 0.86”)Cavity volume:  11 mL  (0.37 fl oz)Approximate Weight: 13 – 15 grams  (0.45 – 0.53 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.  

  Read more less

  $74.68

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Classic Cube 54 Mold

  Classic Cube 54 Mold Candy Mold Specifications: 11ml Classic Cube – 54 CavitiesReference: TM-CC-020Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 9 x 6Cavities Per Mold: 54Cavity Size:  25 x 25 x 19 mm  (1 x 1 x 3/4”)Cavity volume: 11 mL  (0.37 fl oz)Approximate Weight: 13 – 15 grams (0.45 – 0.53 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

  Read more less

  $74.68

  Quantity Add to cart

• 

  Quantity Add to cart

  Truffly Made - Button 80 Mold

  Button 80 Mold   Candy Mold Specifications: Reference: TM-BN-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 8 x 10Cavities Per Mold: 80Cavity Size:   21.5mm Ø x 9.5mm (0.85 Ø x 0.37″)Cavity volume:  2.5 mL  (0.085 fl oz)Approximate Weight: 3.0 – 3.5 grams (0.10 – 0.12 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

  Read more less

  $74.68

  Quantity Add to cart

• 

  Quantity Add to cart

  Elbow fittings 90°/M30x1.5 female/male, pair

  Elbow fittings 90°/M30x1.5 female/male, pair   Replacement for 8890121 Accessories Part Number: 8891721 2 Elbow fittings 90°/M30x1.5 female/male  

  Read more less

  $575.00

  Quantity Add to cart

• Sale -10%

  View options

  True Terpenes 24K Gold Punch

  True Terpenes 24K Gold Punch     Fragrance:  Sweet Coconut Tropical Fruit   Effects:  Relaxing Happy Uplifting   With hints of grapefruit, citrus and fruit punch, our Flavor Infused take on this classic is a show stopper in both the scent and flavor department.   Storage Requirements:  Keep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. Dilution:  Terpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:  The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With Care:  Can cause skin irritation, do not use PRIOR to dilution.     24K Gold Punch-Specific Certificates: Product Specification     Certificate of Analysis   Safety Data Sheet  Food Safety    Company-Specific Certificates: ISO 9001:2015   GMP Certification     FSSC 22000 

  Read more less

  $121.50 - $2,250.00

  View options

• 

  View options

  Ai DigiM 20L 300C 1200 RPM Heating & Stirring Mantle - 220V

  Ai DigiM 20L 300C 1200 RPM Heating & Stirring Mantle - 220V Across International heating and stirring mantles come standard with digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds.The DigiM mantle is equipped with two sets of thermocouples for proper temperature and speed detection. The heating jacket is pre-treated before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment.  Model  DigiM20  Electrical requirements  220V 50/60Hz 1-Phase, 2900 watts, 13.2 A  Heating  Ambient to 300°C  Stirring  Min. speed: 110 rpm, max. speed: 1200 rpm  Motor power: 40 watts Motor type: brushless DC motor  Controller  PID control with digital temperature and rotation speed display  External thermocouple  Type: PT100 Cable length: 43 inches Stainless steel probe length: 15 inches Stainless steel probe diameter: 5 mm  Flask holder  Maximum flask capacity: 20 liters Top opening diameter: 14.5 inches Depth: 7.5 inches  Dimensions (WxDxH)  Unit: 20.5 x 20.5 x 13 inches, shipping: 24 x 24 x 18 inches  Weight  Unit: 40 lbs, shipping: 50 lbs  Safety  Thermocouple failure protection  Certification  ETL tested to UL and CSA standards (optional), CE (standard)  Warranty  One year   Standard package    Part description  Quantity Part image  Ai DigiM 20L digital heating & stirring mantle 1 pc   DigiM20: Cable Length: 43”, Probe Length: 15” 1 pc  Internal temperature plug 1 pc    Boss head DigiM20: 2 pcs 2 pcs    Stainless steel support rod DigiM20: 2 pcs 2 pcs    PTFE coated stir bar 2 pcs    PTFE coated magnetic stir bar remover 1 pc   4 prong stainless steel clamp opens to 3 1/2" DigiM20: 2 pcs 2 pcs  User's manual 1 pc

  Read more less

  $1,590.00 - $2,140.00

  View options

• 

  Quantity Add to cart

  So-Low Explosion Proof-ManualDefrost Freezer, 20 Cu. Ft, 115V

  So-Low Explosion Proof-ManualDefrost Freezer, 20 Cu. Ft, 115V SPECIFICATION SHEET USER MANUAL  SET-UP / STORAGE GUIDE Electrical Specifications Voltages Available 115 Volts 60 Hertz 1 Phase Amperage 6 Running Amps Supply Plug Not Supplied. Must be Hardwired. Certification(s) ETL Listed     Energy Star Rated Control Specifications Temperature Control Adjustable Mechanical Thermostat General Specifications Defrost Manual Air Circulation Gravity Flow Compressor(s) Hermetic Compressor Refrigeration R290 Insulation High Density Urethane Opening 1 Front Door Opening Type Hinged Door Material Insulated Steel Lockable Door Keyed Lock Storage 6 Fixed Shelves Exterior Painted Steel Interior Painted Steel Leveling Legs 4 Warranty 2 Years Parts and Labor

  Read more less

  $5,190.00

  Quantity Add to cart

• 

  Quantity Add to cart

  So-Low Explosion Proof Freezers (Manual Defrost) 17 cubic ft. Upright DHH20-17SDFX

   So-Low Explosion Proof Freezers (Manual Defrost) 17 cubic ft. Upright DHH20-17SDFX SPECIFICATION SHEET USER MANUAL SET-UP / STORAGE GUIDE Electrical Specifications Voltages Available 115 Volts 60 Hertz 1 Phase Amperage 6 Running Amps Supply Plug Not Supplied. Must be Hardwired. Certification(s) ETL Listed     Energy Star Rated Control Specifications Temperature Control Digital Display Min / Max Temperature Display and Reset Temperature Alarm Audible High / Low Alarm Alarm Relay Dry Contacts General Specifications Defrost Manual Air Circulation Gravity Flow Compressor(s) Hermetic Compressor Refrigeration R290 Insulation High Density Urethane Opening 1 Front Door Opening Type Hinged Door Material Insulated Steel Lockable Door Keyed Lock Storage 6 Fixed Shelves Exterior Painted Steel Interior Painted Steel Leveling Legs 4 Warranty 2 Years Parts and Labor

  Read more less

  $5,000.00

  Quantity Add to cart

• 

  Quantity Add to cart

  So-Low Explosion Proof Freezers (Manual Defrost) 14 Cubic Ft. Upright DHH20-14SDFX

  So-Low Explosion Proof Freezers (Manual Defrost) 14 Cubic Ft. Upright DHH20-14SDFX SPECIFICATION USER MANUAL  SETUP / STORAGE GUIDE Electrical Specifications Voltages Available 115 Volts 60 Hertz 1 Phase Amperage 3.5 Running Amps Supply Plug Not Supplied. Must be Hardwired. Certification(s) ETL Listed     Energy Star Rated Control Specifications Temperature Control Digital Display Min / Max Temperature Display and Reset Temperature Alarm Audible High / Low Alarm Alarm Relay Dry Contacts General Specifications Defrost Manual Air Circulation Gravity Flow Compressor(s) Hermetic Compressor Refrigeration R290 Insulation High Density Urethane Opening 1 Front Door Opening Type Hinged Door Material Insulated Steel Lockable Door Keyed Lock Storage 6 Fixed Shelves Exterior Painted Steel Interior Painted Steel Leveling Legs 4 Warranty 2 Years Parts and Labor    

  Read more less

  $4,810.00

  Quantity Add to cart

• Sale -25%

  Quantity Add to cart

  Sheldon Manufacturing - FORCED AIR OVEN, 27.6 CUBIC FEET

  Sheldon Manufacturing - FORCED AIR OVEN, 27.6 CUBIC FEET The SHEL LAB Model SMO28-2 is the largest general-purpose oven on the market. The independent overtemperature safety feature is user adjustable and provides added safety. The turbo blower-assisted forced airflow design coupled with a heavy-duty blower motor offers excellent temperature uniformity and fast recovery times. Airflow is directed evenly across all shelves and samples to ensure consistent drying, curing, and baking results.   The SMO large capacity units are perfect for high volume sample and drying applications, including production processes. These units are especially ideal for glassware drying.   These SHEL LAB ovens Feature: Three-inch Adjustable Exhaust Port Stainless Steel Shelves Independent Overtemperature Safety High-Temperature Silicone Door Seal No Exposed Heating Elements Added docking collars to intake and exhaust ports to allow ducting to be attached for venting exhaust out of the workspace Shelf standards moved to the sides of the unit for easier shelf installation  Wrap Around Insulation Durable Powder Coat Paint Exterior Finish Digital Timer 24 Month Limited Warranty

  Read more less

  $9,496.00$7,130.00

  Quantity Add to cart

• Sale -16%

  View options

  Sheldon Manufacturing - OVEN, FORCED AIR, 5 CUFT

  Sheldon Manufacturing - OVEN, FORCED AIR, 5 CUFT The SMO5 is equipped with a stainless-steel interior for long-life operation and easy cleaning. With triple wall construction, this oven’s walls minimize external wall temperature which meets CE requirements to keep work spaces cool. These ovens are recommended for critical and analytical use in laboratory and pilot plant product research. Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing.   This unit has a quick ramp-up time to 306°C for faster cycle times. This unit includes an advanced PID temperature control system for sensitive response. The SMO5 forced air oven delivers precise uniformity, air distribution, and the peace of mind expected of the SHEL LAB brand.   Features of this oven include: Embedded Microprocessor Control with Countdown Timer Horizontal Forced Airflow 1.75in (45 mm) Access Port UL/CSA Approved CE Approval DIN 12880 Compliant 24 Month Limited Warranty

  Read more less

  $4,090.00 - $4,150.00

  View options

• Sale -16%

  View options

  Sheldon Manufacturing - OVEN, FORCED AIR, 3 CUFT

  Sheldon Manufacturing - OVEN, FORCED AIR, 3 CUFT The SMO3 has a quick ramp-up time to 306°C for faster cycle times. This unit includes an advanced PID temperature control system for sensitive response. These ovens are recommended for critical and analytical use in laboratory and pilot plant product research. Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing.   This unit is equipped with a stainless-steel interior for long-life operation and easy cleaning. Its triple wall construction minimizes external wall temperature which meets CE requirements to keep workspaces cool. The SMO3 forced air oven delivers precise uniformity, air distribution, and the peace of mind expected of the SHEL LAB brand.   Features of this oven include: Embedded Microprocessor Control with Countdown Timer Horizontal Forced Airflow 1.75in (45mm) Access Port UL/CSA Approved CE Approval DIN 12880 Compliant 24 Month Limited Warranty Options: SMO3: OVEN, FORCED AIR, 3 CU FT, 115V SMO3-2: OVEN, FORCED AIR, 3 CU FT, 230V

  Read more less

  $3,425.00 - $3,475.00

  View options

• Sale -16%

  View options

  Sheldon Manufacturing - OVEN, FORCED AIR, 1.5 CUFT

  Sheldon Manufacturing - OVEN, FORCED AIR, 1.5 CUFT The SMO1 has a quick ramp-up time to 306°C for faster cycle times. This unit includes an advanced PID temperature control system for sensitive response.   These ovens are recommended for critical and analytical use in laboratory and pilot plant product research. Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing.   This unit is equipped with a stainless-steel interior for long-life operation and easy cleaning. Its triple wall construction minimizes external wall temperature which meets CE requirements to keep work spaces cool.   The SMO1's forced air ovens deliver precise uniformity, air distribution and the peace of mind expected of the SHEL LAB brand.   Features of this oven include: Embedded Microprocessor Control with Countdown Timer Horizontal Forced Airflow 1.75in (45 mm) Access Port UL/CSA Approved CE Approval DIN 12880 Compliant 24 Month Limited Warranty   Options: SMO1: OVEN, FORCED AIR, 1.5 CU FT, 115V SMO1-2: OVEN, FORCED AIR, 1.5 CU FT, 230V  

  Read more less

  $3,100.00 - $3,175.00

  View options

• 

  View options

  Chilled Water Skid 300gal

  Chilled Water Skid 300gal Input room temp tap water, and get out ice cold ~35f RO water on demand!  Our 300gal Chilled Water Skid setups include the complete turnkey system for your chilled water management. Our system will include all necessary fittings, valves, hoses, pumps, sprayer, chiller, and 300gal storage tank for efficient cold-water management. This product includes: x1 - 18,000 BTU Chiller x1 - Food Grade Chiller Recirculation Pump  (LT Built) x1 - Auto Pressurizing Pump for spraying and filling Osprey x1 - 300 Gal Water Tank 34" D x 83" H x1 - 25' Stainless Steel Garden Hose x1 - (Optional*) 1000 Gallon/Day RO System And all related insulated hoses, connections, etc!

  Read more less

  $7,350.00 - $8,000.00

  View options

• 

  View options

  Recycle Kits

  Recycle Kits Recycle Kits contain a bundle of all necessary pumps, hoses, remotes, ball valves, filters, clamps, gaskets to achieve sanitary hash water recirculation. There are two configurations:  Nest Recycle Kit - This is plug and play on any Osprey Nest. Contains: 1 Sanitary Recycle Pump 1 Remote 4 Ball Valves to Sanitary 1 7ft Hash Hose 2 Sanitary Filters 11 Clamps and Gaskets 1 90 elbow 25 ft Clear Tubing 1 Sanitary 3 Way   DIY Recycle Kit - Used to create your own recycle system with 20/32 gallon plastic cans. 1 Sanitary Recycle Pump 1 Remote 1 Step Bit 1 Stainless Steel Bulk head with Stainless Ball Valve to Sanitary 1 7ft Hash Hose 1 4ft Hash Hose 7 Clamps and Gaskets 1 90 elbow  

  Read more less

  $975.00 - $1,380.00

  View options

• 

  Quantity Add to cart

  The Nest - Recirculation Collection Tank

  The Nest - Recirculation Collection Tank The Partner in Crime for The Osprey™! The Nest is an 85 gallon Stainless Steel Collection and recirculation vessel, essentially creating a "Closed Loop" environment for your process. Simply drain the Osprey into the Nest, which features a slot for your 32 gallon bags, and fire up the pump to move the water back into your Osprey for the next wash.  No need to wrangle multiple buckets, lifting buckets, etc to recirculate your water!  Features: 85 gallon capacity Sloped Floor to Sanitary 1.5" Tri Clamp Drain Passivated 304 ss Food Grade Welds throughout Integrated Sightglasses to check fill points 360 casters throughout Quick connects to secure/disconnect from The Osprey Environmentally Friendly Solution Simplified Resin collection 250lbs dry weight 27"W x 23"H x 83"L Nest Recycle Kit sold separately* Want to see The Osprey and The Nest working together? Watch this video from Hash Fight. Is The Nest absolutely required for an Osprey? Nope, The Osprey is still an absolute game changer even if you drain to waste or recirculate with a series of buckets. However, The Nest will make your life easier, and save you significant money/time! The biggest downside to The Nest is the cost. We're not going to lie, it's pretty pricey. This cost comes from the rising Stainless Steel cost, limited supply of commodities, and the total distance of food grade welds throughout the vessel. There is actually a longer total distance of food grade welds in the Nest than The Osprey itself.  With the price being addressed, that's not to say this piece of equipment is only going to cost you money. We are seeing many of our Osprey clients upgrade to the Nest post purchase, because they see the efficiencies that the Nest can bring into their process. Between the labor savings and resource savings, it's a no brainer solution for most commercial outfits operating enough material! Please see the below ROI sheet to see how The Nest can help your operation.   

  Read more less

  $9,995.00

  Quantity Add to cart

• 

  View options

  The Osprey™ - 75 Gallon Commercial Washing Machine

  The Osprey - 75 Gallon Commercial Washing Machine We're proud to announce the introduction of our 75 gallon commercial washing machine, the Osprey™! We've crafted this with the collaboration of hash makers for over 2 years.  The Osprey™ is our answer to the bottleneck of commercial processing operations: Hash Washing. With a 21,000g Fresh Frozen Capacity, or 4,200g-4,600g Dry Flower, it's designed to gently, but thoroughly extract all the resin from your material. We saw other options on the market, and too many had aggressive blades designed to chop up material like a blender, nooks and crannies for mold and bacteria growth, and cheap components. We set out to fix that at an aggressive price and impeccable reliability. Food Grade Passivated 304 Stainless Steel with Sanitary Welds makes for an extremely simple, easy, and automated cleaning cycle. Made in USA, as always. 21,000g Fresh Frozen or 4,200g Dry Weight Capacity.  1,000g Fresh Frozen or 200g Dry Weight Minimum Capacity. 25-30 gallons minimum water input.  Volumetric marking inside the tank allows for easy measurements of water and ice volumes. Quick Clamp Sanitary fittings on the left and right side allow for a fresh water hookup, and recycle water hookup on the other. Both fittings can simply be plugged if the user wishes to add water in manually from the top. A food grade Plexiglass lid locks into place with a seal to avoid leaking if using while full, and allowing the user to watch/tune the water agitation. Easy Water Management via Quick Clamp Sanitary fittings allow for easy filling and draining of the machine. Plumb your filtered water line directly through a sanitary fitting on the sidewall with a valve for a super simple and safe way to get water into the wash vessel. Utilize a pump of your preference to pump water from the drain bucket back into the Osprey, or out into a drain. Drain sits at a perfect level for 32 gallon buckets/wash bags, however 20 gallon buckets on casters can also be used.  Full Washdown Rated PLC Smart Controller. 110v with 5a continuous draw. UL 508a Control Panel. Control/Save RPM speed, Total Run Time, Run Time Each Direction, and Rest Time between switching directions on a waterproof 7” touchscreen computer controller. Save parameters with Recipes. 20 amp dedicated circuit required with no GFCI.  An Integrated Thermocouple ensures proper temperature control. For an 8hr shift, expect to use around 250lbs of ice per day.  Hard Food Grade Anodized Monolithic Billet Aluminum Impeller with smooth ridges Does not chop up/blend material, rather it gently but thoroughly mixes the material, washing the trichome heads off of their stalks. This imitates the hand washing, full melt results that some desire. The Lightweight Monolithic Impeller also gives us a perfectly balanced impeller, which extends the life of the motor, transmission, seals, etc drastically. Hard Anodizing seals the impeller from oxidization, and creates a harder than steel coating. Incorporated Floor Locks and Wheel Locks ensure safe operation during use, and simply unlock with the click of a foot for easy workability inside flex spaces. A very critical part of our design when we created the Osprey, was to ensure that it would fit between conventional 3ft door frames so the entire machine doesn’t have to be disassembled just to transfer between rooms or stowaway in a closet, etc. Slightly sloped floor for easy, efficient drainage of trichome filled water. The drain is positioned at a height that allows for drainage into a 32 gallon trash can with conventional 32 gallon wash bags.  An optional "Nest" is available, and can be added to any order. This low profile stainless steel Recycle Reservoir sits underneath the machine, and can hold up to 85 gallons of water with a sloped floor leading to a drain. This drain can connect to a pump to move the drained/filtered water back into the main vessel for recycled usage, or to a sink, floor drain, etc for drainage/waste water. Sieving columns are in development as well, and will be available as an attachment to the Nest Tank. They will be backwards compatible on all Nest Tanks. The goal with these is to eliminate the heartache of washing bubble bags, and the finesse required to collect hash off of floppy screen. Simply drain all of the wash into a column that sieves out different microns.  Available in 110v power or 230v power and Insulated and Chilled Options of both power configurations.  110v power top speed - 420 RPM 230v power top speed - 600 RPM 230v configuration is recommended for countries and locations that utilize 230v power, along with operations requiring higher capacity. The step up in power allows more material to be run at higher speeds, great for food grade/cartridge manufacturing.  Spec Sheet Compliance

  Read more less

  $28,495.00 - $33,995.00

  View options

• Sale -21%

  Quantity Add to cart

  Sheldon Manufacturing - VAC OVEN, 9.3 CUFT, 230V

  Sheldon Manufacturing - VAC OVEN, 9.3 CUFT, 230V The SHEL LAB Model SVAC9-2 is one of the largest vacuum ovens on the market, with 9.3 cubic feet of capacity. This unit also features a fully programmable Watlow PM9 Plus controller and a cool touch surface. A digital vacuum gauge shows chamber vacuum level in measurements of Torr and m/Torr. The display range is 760 Torr down to 0 mTorr (Maximum permitted end vacuum is 10 mTorr. Leak rate is 30 mTorr in 30 min). A secondary independent high limit controller provides overtemperature safety protection. This unit includes true vacuum valves and has cross-flow ventilation within the oven chamber to enhance total performance. The vacuum oven is secured to a ruggedly constructed mobile stand to create a vacuum pump at the base. Although the oven is not supplied with a vacuum pump, all vacuum plumbing and KF25 connections are provided. The SHEL LAB SVAC9-2 vacuum oven is equipped with a Viton gasket, which provides an excellent combination of high-temperature performance and chemical resistance. When paired with this oven’s deep-draw capacity and large chamber volume, the SVAC9-2 serves as one of the most robust vacuum work stations available on the market. Features include: Watlow PM9 Plus Controller Capable Of 40 Step Ramp And Soak Profiles, Or 4 Files With 10 Steps Per File Stainless Steel Interior Stainless Steel Exterior Option Available (Ideal For Cleanroom Applications) KF25 Fitting Included Built in Vacuum Pump Mount 24 Month Limited Warranty

  Read more less

  $23,422.00$18,500.00

  Quantity Add to cart

• Sale -18%

  View options

  Sheldon Manufacturing - VACUUM OVEN, 4.5 CUFT

  Sheldon Manufacturing - VACUUM OVEN, 4.5 CUFT Our revamped SHEL LAB SVAC vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. Vacuum ovens prevent residue accumulation on products and use lower temperatures than typical convection ovens. Your products are processed with minimal impact and maximum throughput.  SHEL LAB vacuum ovens have stainless steel interiors and provide exceptional durability and stability. Available in 4 sizes, SVAC Vacuum Ovens support a diverse array of applications. To achieve required vacuum levels, users can choose from a 3/8-inch orifice or a KF-25 fitting to withstand heavy use and minimize draw-down time. The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples.   SHEL LAB Vacuum Ovens are equipped with silicone gaskets.   Features include: Watlow PM9 Plus Controller Generous Usable Shelf Area Achieve Impressive Vacuum Levels Sizes Range from 0.6 – 4.5 Cubic Feet Built-in Overtemperature Protection 24 Month Limited Warranty Extended Warranties Available* (Ask Your SHEL LAB Sales Rep) Please note that this vacuum oven does not include a pump or related accessories. Contact your SHEL LAB distributor for assistance with choosing the ideal pump and accessories for any application.

  Read more less

  $12,750.00 - $13,975.00

  View options

• Sale -20%

  View options

  Sheldon Manufacturing - VACUUM OVEN, 1.67 CUBIC FEET

  Sheldon Manufacturing - VACUUM OVEN, 1.67 CUBIC FEET Our revamped SHEL LAB SVAC vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials.   Vacuum ovens prevent residue accumulation on products and use lower temperatures than typical convection ovens. Your products are processed with minimal impact and maximum throughput.    SHEL LAB vacuum ovens have stainless steel interiors and provide exceptional durability and stability. Available in 4 sizes, SVAC Vacuum Ovens support a diverse array of applications.To achieve required vacuum levels, users can choose from a 3/8-inch orifice or a KF-25 fitting to withstand heavy use and minimize draw-down time.   The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples.   SHEL LAB Vacuum Ovens are equipped with silicone gaskets.   Features include: Watlow PM9 Plus Controller Generous Usable Shelf Area Achieve Impressive Vacuum Levels Sizes Range from 0.6 – 4.5 Cubic Feet Built-in Overtemperature Protection 24 Month Limited Warranty Extended Warranties Available (Ask Your SHEL LAB Sales Rep) Please note that this vacuum oven does not include a pump or related accessories. Contact your SHEL LAB distributor for assistance with choosing the ideal pump and accessories for any application.

  Read more less

  $6,500.00 - $7,150.00

  View options

• Sale -18%

  View options

  Sheldon Manufacturing - VACUUM OVEN, 0.6 CUBIC FEET

  Sheldon Manufacturing - VACUUM OVEN, 0.6 CUBIC FEET Our revamped SHEL LAB SVAC vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. Vacuum ovens prevent residue accumulation on products and use lower temperatures than typical convection ovens. Your products are processed with minimal impact and maximum throughput.    SHEL LAB vacuum ovens have stainless steel interiors and provide exceptional durability and stability. Available in 4 sizes, SVAC Vacuum Ovens support a diverse array of applications. To achieve required vacuum levels, users can choose from a 3/8-inch orifice or a KF-25 fitting to withstand heavy use and minimize draw-down time.   The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples.   SHEL LAB Vacuum Ovens are equipped with silicone gaskets.   Features include: Watlow PM9 Plus Controller Generous Usable Shelf Area Achieve Impressive Vacuum Levels Sizes Range from 0.6 – 4.5 Cubic Feet Built-in Overtemperature Protection 24 Month Limited Warranty Extended Warranties Available (Ask Your SHEL LAB Sales Rep) Please note that this vacuum oven does not include a pump or related accessories. Contact your SHEL LAB distributor for assistance with choosing the ideal pump and accessories for any application.

  Read more less

  $5,200.00 - $5,650.00

  View options

• Sale -22%

  View options

  Sheldon Manufacturing - ECONOMY VACUUM OVEN, 1.7 CUFT, NON CE

  Sheldon Manufacturing - ECONOMY VACUUM OVEN, 1.7 CUFT, NON CE SHEL LAB vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. They prevent residue accumulation on products and allow safe drying of materials at lower temperatures than typically required when using convection ovens.   These units feature a radiant heating system that optimizes chamber space and provides excellent heat transfer and temperature uniformity. All SHEL LAB vacuum ovens are built with stainless steel chambers that are easy to clean and have exceptional durability.   The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples. A selection of gaskets (for specific applications) and a small benchtop footprint increase the versatility of these ovens.      The SHEL LAB economy series of vacuum ovens are outstanding in any application. Features include: Analog Temperature Control Stainless-Steel Interior Built-in Overtemperature Protection 24 Month Limited Warranty

  Read more less

  $2,650.00 - $2,900.00

  View options

• Sale -25%

  View options

  Sheldon Manufacturing - ECONOMY VACUUM OVEN, 0.6 CUFT, NON CE

  Sheldon Manufacturing - ECONOMY VACUUM OVEN, 0.6 CUFT, NON CE HEL LAB vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. They prevent residue accumulation on products and allow safe drying of materials at lower temperatures than typically required when using convection ovens.   These units feature a radiant heating system that optimizes chamber space and provides excellent heat transfer and temperature uniformity. All SHEL LAB vacuum ovens are built with stainless steel chambers that are easy to clean and have exceptional durability.   The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples. A selection of gaskets (for specific applications) and a small benchtop footprint increase the versatility of these ovens.    The SHEL LAB economy series of vacuum ovens are outstanding in any application. Features include: Analog Temperature Control Stainless-Steel Interior Built-in Overtemperature Protection 24 Month Limited Warranty

  Read more less

  $2,110.00 - $2,310.00

  View options

• 

  Quantity Add to cart

  ChemTek - Snow Queen Oil Filtration

  ChemTek - Snow Queen Oil Filtration Create isolate in minutes Redissolve and reformulate Dual Mixer

  Read more less

  $22,000.00

  Quantity Add to cart

• 

  View options

  3x5 V2 Rosin Press Bundle with Hydraulics

  V2 Rosin Press 4x7 Bundle with Hydraulics   Description We designed this press with your space and portability constraints in mind. All the while, creating a press that will last you a lifetime. We kept the pressure options entirely open source so you can select the press style that works for you. For more budget friendly options, a simple $40 bottle jack can be used. If you want the best of the best, we carry High End BVA Hydraulics which come assembled, bled, and tested with pressure gauges installed.  Our modular design makes any possible electronic warranty work extremely cheap to ship for fulfillment. Our competitors make you ship an entire press in for a simple electronic component failure or loose wire which can cost you hundreds in shipping fees. LT2 vs LT3 Heat Controllers: LT2 is a basic interface proprietary dual zone heat controller tuned for our presses. Simply utilize a dial and buttons to interface with the device, set your temperatures, and let it run! Only available with 110v North American Power. LT3 is a brand new heat controller that is capable of much much more. Record presses via Bluetooth connection to our software, receive over-the-air updates, record recipes, and track automatically calculated Platen PSI with a bright touchscreen interface. Available in 110v and 230v international.  Specs Sturdy and Ultra Compact design. 10" tall, 7" long, 5" wide 40 lbs Complete Modular design Anodized and insulated 3"x5" plates Powder coated steel Made in Denver, Colorado with Certified American alloys Lifetime Warranty on the press  1 year full warranty on the electronics. After the one year, we fix everything at cost of parts and shipping. No labor. Universal force options up to 20 tons Horizontal pressing capabilities   This product includes: 3x5 Lowtemp Press backed with our Lifetime Warranty Top and bottom legs (used to bolt the press to the table or used to turn press horizontally)  LT2 Heat Controller which features Dual PID controls, enhanced safety user interface, double function as an enail, and incredibly precise custom programming specifically for rosin Mounting hardware to secure the legs to the press FREE shipping via UPS Ground/Fedex Ground Optional assembled and tested hydraulics of your choice   Options: Press only: This option is for customers who already own a Lowtemp Plate or Cage kit, upgrading to our new Lowtemp Press with their current controller and adding their own hydraulics. All mounting accessories and hardware included. 4" taller to support bottle jacks. Press with Controller: This option includes the Lowtemp Press with Controller. This is a full kit, which allows you to add your own bottle jack ($40). Great for high quality, portable, reliable, budget builds! This system's structure support rods are 4" longer to fit bottle jacks.   Press with Controller and BVA Hand Pump: This solution is out of the box, plug and play. All hydraulics come assembled, bled, and tested. Includes a 20 ton low profile BVA cylinder, ultra compact 2 speed aluminum pump, pressure gauge included.  **Option to upgrade for +$250 to our premium, high flow BVA P1000 pump. This features more travel per stroke and a longer handle for extra leverage. Ideal for high workloads**   Press with Controller and BVA Air pump: Requires an Air compressor. The pump is technically a foot pedal that is operated by stepping on a pedal, but can also be operated by hand pressure. 20 ton low profile cylinder, pressure gauge included.   Press with Controller and SPX Electric pump: Fully automated Electric over hydraulic system with very little noise. Great for large scale operations or anyone looking for a press to run itself at the touch of a button. 20 ton low profile cylinder, pressure gauge included.    Additional Options Already own a set of our 3x5 or 4x7 plates/cage? Purchase our press without a controller to save some money. The controllers are the exact same! We will still include all hardware, legs, etc with the press. If you choose to include a High End hydraulics kit, the components will come assembled. These kits consist of a low profile 20 ton cylinder, pump of your choice, hose, all necessary couplings, and a pressure gauge.    NOTE: All color options are Limited Edition, and subject to quick stock changes. We will do everything possible to fulfill the color choice you choose, however they can cycle quickly.   This product cannot be shipped to a PO Box due to it's size/weight. For Domestic 48 state orders, we ship UPS or Fedex, which won't deliver to a PO Box. 

  Read more less

  $1,175.00 - $3,155.00

  View options

• 

  Quantity Add to cart

  So-Low Explosion Proof Dual Temp Freezer/Refrigerator 30 Cubic Feet DHH-30RFX

  So-Low Explosion Proof Dual Temp Freezer/Refrigerator 30 Cubic Feet DHH-30RFX SPECIFICATION SHEET USER MANUAL SET-UP / STORAGE GUIDE Temperature Specifications   Refrigerator 1°C to 10°C 33°F to 55°F Freezer -18°C to -25°C 0°F to -13°F Electrical Specifications Voltages Available 115 Volts 60 Hertz 1 Phase Amperage 15 Amp Dedicated Line     6 Running Amps NEMA Configuration NEMA 5-15 Certification(s) UL Listed Control Specifications Temperature Control Adjustable Mechanical Thermostat General Specifications     REFRIGERATOR FREEZER Defrost Manual Manual Air Circulation Gravity Flow Gravity Flow Compressor(s) Hermetic Compressor Hermetic Compressor Refrigeration R404A R404A Insulation Polyurethane Foam Polyurethane Foam Opening 1 Front Door 1 Front Door Opening Type Hinged Hinged Door Material Insulated Steel Insulated Steel Lockable Door Keyed Lock Keyed Lock Storage 3 Adjustable Shelves None Exterior Painted Steel Painted Steel Interior Painted Steel Painted Steel Leveling Legs 4   Warranty 2 Years Parts and Labor  

  Read more less

  $10,720.00

  Quantity Add to cart

• 

  Quantity Add to cart

  So-Low Explosion Proof Refrigerators (Manual Defrost) 20 cubic ft. DHH4-20SDRX

  So-Low Explosion Proof Refrigerators (Manual Defrost) 20 cubic ft. DHH4-20SDRX Please note: This Product may carry up to an 8 week lead time!     Description Hazardous Location Refrigerators(+4°C) are designed to meet National Fire Protection Agency (NFPA) and OSHA guidelines for the refrigerated storage of volatile and non-volatile materials in Hazardous Locations, Class 1, Division II, Group C & D. Power cord is not included. Final power connections at site must be hardwired to meet local codes.  All spark generating electrical components and connections (compressor, thermostat) are isolated and sealed in vapor-proof enclosures. Electrical wiring is hardwired for additional safety measures.  So-Low's various Explosion Proof / Manual Defrost Freezers, Refrigerators, and Combination units, offer a diverse range of options to fit your needs for Explosion Proof products. Ranging from 11 cubic feet to 30 cubic feet, these units are ideal for products of any size. Two inch solid urethane foam insulated doors, sturdy cam-lift hinges, and "lock-open" feature for "hands-free" access provide a secure and sturdy environment. Features 22 Gauge Cold Roll Steel Exterior 26 Gauge Galvanized Steel Interior High Luster Baked Enamel Surface Coating 2-3/8 inch (6cm) Urethane insultation 2-Inch Solid Urethane Foam Insulated Doors Sturdy Cam-Lift Hinges With Lock-Open Feature Adjustable Cantilever Shelves (Epoxy Coated) 6-Inch Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat Manual Defrost UL Listed   Product Specification Manufacturer So-Low Temperature Range 1°C to 10°C Capacity 20 cubic ft. Exterior w x d x h (inches) 32'' x 34'' x 71'' Interior w x d x h (inches) 27'' x 20'' x 57''c Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves One adjustable, 3 Fixed Epoxy Coated Insulation Polyurethane foam Refrigerant R404A CFC free Compressor 1/2 hp Evaporator Cold Wall Thermostat Exterior adjustable Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 4/15 Supply Plug none/ hardwired Shipping weight 500 lbs Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor.

  Read more less

  $5,510.00

  Quantity Add to cart

• 

  Quantity Add to cart

  So-Low Explosion Proof Refrigerators (Manual Defrost) 17cubic ft DHH4-17SDRX

  So-Low Explosion Proof Refrigerators 17cubic ft DHH4-17SDRX   Please note: This Product may carry up to an 8 week lead time!   Description Hazardous Location Refrigerators(+4°C) are designed to meet National Fire Protection Agency (NFPA) and OSHA guidelines for the refrigerated storage of volatile and non-volatile materials in Hazardous Locations, Class 1, Division II, Group C & D. Power cord is not included. Final power connections at site must be hardwired to meet local codes.  All spark generating electrical components and connections (compressor, thermostat) are isolated and sealed in vapor-proof enclosures. Electrical wiring is hardwired for additional safety measures.  So-Low's various Explosion Proof / Manual Defrost Freezers, Refrigerators, and Combination units, offer a diverse range of options to fit your needs for Explosion Proof products. Ranging from 11 cubic feet to 30 cubic feet, these units are ideal for products of any size. Two inch solid urethane foam insulated doors, sturdy cam-lift hinges, and "lock-open" feature for "hands-free" access provide a secure and sturdy environment. Features 22 Gauge Cold Roll Steel Exterior 26 Gauge Galvanized Steel Interior High Luster Baked Enamel Surface Coating 2-3/8 inch (6cm) Urethane insultation 2-Inch Solid Urethane Foam Insulated Doors Sturdy Cam-Lift Hinges With Lock-Open Feature Adjustable Cantilever Shelves (Epoxy Coated) 6-Inch Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat Manual Defrost UL Listed   Product Specification Manufacturer So-Low Temperature Range 1°C to 10°C Capacity 17cubic ft. Exterior w x d x h (inches) 32'' x 32'' x 65'' Interior w x d x h (inches) 26'' x 17'' x 51'' Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves One adjustable, 2 Fixed Epoxy Coated Insulation Polyurethane foam Refrigerant R404A CFC free Compressor 1/2 hp Evaporator Cold Wall Thermostat Exterior adjustable Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 4/15 Supply Plug none/ hardwired Shipping weight 500 lbs Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor.

  Read more less

  $5,110.00

  Quantity Add to cart

• 

  Quantity Add to cart

  So-Low Flammable Material Refrigerator 30 cubic ft. DHH4-30SDFMS

  So-Low Flammable Material Refrigerator  30 cubic ft. DHH4-30SDFMS Please note: This Product may carry up to an 8 week lead time!   Description Flammable Refrigerators are designed to meet National Fire Protection Agency NFPA andOSHA guidelines for the refrigerated (+4°C) storage of flammable (volatile) material storage in general laboratory work areas. Upright and undercounter models. Designed exclusively to control flammable material, The So-Low Flammable Material Storage Freezers and Refrigerators are ideal for storage of any flammable material products. There are no electrical components located in the interior of the unit and the compressor's electrical components have been sealed in a vapor-proof enclosure for additional safety.  Units are supplied with a power cord to ease installation. Temperature control and temperature recorder options allow for an individualized intensity of temperature control and monitoring. Adjustable legs and shelves add more availability and storage options to fit your laboratories needs.   Features Solid Polyurethane Foam Insulated Doors Epoxy Coated Shelves Adjustable Shelves Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat Manual Defrost UL Listed     Product Specification Manufacturer So-Low Temperature Range 1°C to 10°C Capacity 30 cubic ft. Exterior w x d x h (inches) 35'' x 35'' x 72'' Interior w x d x h (inches) 32'' x 22.5'' x 65'' Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves One Adjustable / Two Fixed Shelves Insulation Polyurethane foam Refrigerant R404A CFC free Compressor 1/3 hp Condenser Hot Wall Evaporator Cold Wall Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 7/15 Supply Plug 5-15P NEMA UL listed Shipping weight 375 lbs. Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor.   Specification Data Sheet 

  Read more less

  $7,790.00

  Quantity Add to cart

• 

  Quantity Add to cart

  So-Low Flammable Material Storage Refrigerators 20 cubic ft. DHH4-20SDFMS

  So-Low Flammable Material Storage Refrigerators  20 cubic ft. DHH4-20SDFMS Please note: This Product may carry up to an 8 week lead time!     Description Our Flammable Refrigerators and Freezers are desinged to meet National Fire Protection Agency NFPA and OSHA guidelines for the refrigerated storage of flammable (volatile) material storage in general laboratory work areas.  Designed exclusively to control flammable material, The So-Low Flammable Material Storage Freezers and Refrigerators are ideal for storage of any flammable material products. There are no electrical components located in the interior of the unit and the compressor's electrical components have been sealed in a vapor-proof enclosure for additional safety.  Units are supplied with a power cord to ease installation. Temperature control and temperature recorder options allow for an individualized intensity of temperature control and monitoring. Adjustable legs and shelves add more availability and storage options to fit your laboratories needs.   Features Solid Polyurethane Foam Insulated Doors Epoxy Coated Shelves Adjustable Shelves Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat  Manual Defrost  UL Listed Product Specification Manufacturer So-Low Temperature Range 1°C to 10°C Capacity 20 cubic ft. Exterior w x d x h (inches) 32'' x 34'' x 71'' Interior w x d x h (inches) 27'' x 20'' x 57'' Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves One Adjustable / Two Fixed Shelves Insulation Polyurethane foam Refrigerant R404A CFC free Compressor 1/3 hp Condenser Hot Wall Evaporator Cold Wall Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 7/15 Supply Plug 5-15P NEMA UL listed Shipping weight 325 lbs. Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor.   Specification Data Sheet 

  Read more less

  $4,260.00

  Quantity Add to cart

• 

  Quantity Add to cart

  So-Low Flammable Material Storage Refrigerators 14 cubic ft DHH4-14SDFMS

  So-Low Flammable Refrigerators/ Freezers 14 cubic ft  DHH4-14SDFMS Please note: This Product may carry up to an 8 week lead time! Description Flammable Refrigerators are designed to meet National Fire Protection Agency NFPA andOSHA guidelines for the refrigerated (+4°C) storage of flammable (volatile) material storage in general laboratory work areas. Upright and undercounter models.  Designed exclusively to control flammable material, The So-Low Flammable Material Storage Freezers and Refrigerators are ideal for storage of any flammable material products. There are no electrical components located in the interior of the unit and the compressor's electrical components have been sealed in a vapor-proof enclosure for additional safety.  Units are supplied with a power cord to ease installation. Temperature control and temperature recorder options allow for an individualized intensity of temperature control and monitoring. Adjustable legs and shelves add more availability and storage options to fit your laboratories needs.   Features Solid Polyurethane Foam Insulated Doors Epoxy Coated Shelves Adjustable Shelves Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat Manual Defrost UL Listed       Product Specification Manufacturer So-Low Temperature Range 1°C to 10°C Capacity 14 cubic ft Exterior w x d x h (inches) 32'' x 32'' x 60' Interior w x d x h (inches) 23'' x 20'' x 46'' Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves One Adjustable / Two Fixed Shelves Insulation Polyurethane foam Refrigerant R404A CFC free Compressor 1/3 hp Condenser Hot Wall Evaporator Cold Wall Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 4/15 Supply Plug 5-15P NEMA UL listed Shipping weight 250Lbs Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor.   Specification Data Sheet 

  Read more less

  $3,740.00

  Quantity Add to cart

• 

  Quantity Add to cart

  So-Low Flammable Material Refrigerator 17 Cu.Ft, DHH4-17SDFMS

  So-Low Flammable Material Refrigerator 17 Cu.Ft, DHH4-17SDFMS Please note: This Product may carry up to an 8 week lead time!   Description Flammable Refrigerators are designed to meet National Fire Protection Agency NFPA andOSHA guidelines for the refrigerated (+4°C) storage of flammable (volatile) material storage in general laboratory work areas. Upright and undercounter models. Designed exclusively to control flammable material, The So-Low Flammable Material Storage Freezers and Refrigerators are ideal for storage of any flammable material products. There are no electrical components located in the interior of the unit and the compressor's electrical components have been sealed in a vapor-proof enclosure for additional safety.  Units are supplied with a power cord to ease installation. Temperature control and temperature recorder options allow for an individualized intensity of temperature control and monitoring. Adjustable legs and shelves add more availability and storage options to fit your laboratories needs.   Features Solid Polyurethane Foam Insulated Doors Epoxy Coated Shelves Adjustable Shelves Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat Manual Defrost UL Listed   Product Specification Manufacturer So-Low Temperature Range 1°C to 10°C Capacity 14 cubic ft Exterior w x d x h (inches) 2'' x 32'' x 65'' Interior w x d x h (inches) 26'' x 17'' x 51'' Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves One Adjustable / Two Fixed Shelves Insulation Polyurethane foam Refrigerant R404A CFC free Compressor 1/3 hp Condenser Hot Wall Evaporator Cold Wall Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 4/15 Supply Plug 5-15P NEMA UL listed Shipping weight 275Lbs Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor.   Specifications Data Sheet 

  Read more less

  $4,030.00

  Quantity Add to cart

• 

  View options

  J-KEM DVM-100

  J-kem DVM-100  The DVM-100 continuously displays the pressure in a connected piece of equipment on a large digital display. The vapor path of the DVM-100 is 100% stainles steel to provide long life and chemical compatibility. Comes with J-KEM’s KEM-Net software to provide data logging and a real time graphical display of system pressure. The DVM-100 provides vacuum monitoring but not vacuum regulation.  

  Read more less

  $1,320.00

  View options

• 

  View options

  Huber Unistat T402 with Pilot ONE

  Huber Unistat T402 with Pilot ONE    The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen color display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapors and oxidation, further saving resources. Unistats are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated.     Precise and reproducible temperature control results   Wide temperature ranges with no fluid change   Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation Adaptive temperature control, self-optimizing  Efficient circulation pump 2 x USB (Host and Device), Ethernet and RS232 interfaces   Efficient operation saves working time and operating costs  Proven functionality for the process industry  E-grade "Professional" included   General Information & Temperature Controller Temperature range 65...300 °C Temperature stability ±0.05 °C Temperature control TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C Alarm message optical, acoustical Controller Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 505 x 400 x 765 mm | 19.88 x 15.75 x 30.12 inches Weight 54 kg | 119.07 pounds Heating / Cooling Capacity Heating capacity 4,8 kW Circulation Pump Pressure pump max. 45 lpm ; 0.9 bar | 11.89 gpm ; 13.05 psi Pump connection M24x1,5 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old sku 1038.0004.01 Permissible ambient temp. 5 to 40 °C Filling volume min. 1.45 Liters | 0.38 gal Volume of expansion 2.8 Liters | 0.74 gal Power supply 208V 3~ 60Hz Cooling water Connection G1/2 AG

  Read more less

  $48,500.00 - $49,000.00

  View options

• 

  View options

  Huber Unistat Tango with Pilot ONE

  Huber Unistat Tango with Pilot ONE (Please Note: There is  2-3  weeks Shipping  lead time)          Unistats are predestined for applications in process and chemical engineering, such as temperature control of reactors, autoclaves, Miniplant/Pilot systems, reactor blocks and calorimeters. Unistat temperature control systems with their unique thermodynamics provide highly accurate and reproducible results, guaranteeing the shortest heating and cooling times and a wide temperature range without fluid change. Environmentally and economically Unistats stand out, offering natural refrigerants and an efficient energy management system for reduced operating costs. .  Precise and reproducible temperature control results Fastest heating and cooling rates Wide temperature ranges with no fluid change Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation Adaptive temperature control, self-optimising Efficient circulation pump 2 x USB (Host and Device), Ethernet and RS232 interfaces Efficient operation saves working time and operating costs Proven functionality for the process industry E-grade "Professional" included      Download Data sheet Unistat tango  Download Data Sheet Unistat tango w Download Data Sheet Unistat tango wl Operating Manual  Click here 3 year Warranty Register    General Information & Temperature Controller Unistat Tango Unistat Tango w Unistat Tango wl Temperature range -45...250 °C -45...250 °C -45...250 °C Temperature stability ±0.01 °C ±0.01 ±0.01 °C Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C 0.01 °C 0.01 °C Alarm message optical, acoustical optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL III / FL Protection class IP20 IP20 IP20 Dimensions (W x D x H) 16.77 x 12.87 x 24.84 inches 16.77 x 12.87 x 24.84 inches 16.77 x 12.87 x 24.84 inches Weight 141.12 pounds 119.07 pounds 132.3 pounds Heating / Cooling Capacity Heating capacity 3 kW 3 kW 3 kW Cooling capacity 250 200 100 0 -20 -40 °C0,7 0,7 0,7 0,7 0,4 0,06 kW 250 200 100 0 -20 -40 °C0,7 0,7 0,7 0,7 0,4 0,06 kW 250 200 100 0 -20 -40 °C0,7 0,7 0,7 0,7 0,4 0,06 kW Cooling machine air-cooled water-cooled air- and water-cooled Refrigerant R1270 (0,15 kg) R1270 (0,09 kg R1270 (0,15 kg) Circulation Pump Pressure pump max. 55 lpm ; 0.9 bar | 14.53 gpm ; 13.05 psi 55 lpm ; 0.9 bar | 14.53 gpm ; 130.5 psi 55 lpm ; 0.9 bar | 14.53 gpm ; 130.5 psi Pump connection M24x1,5 AG male M24x1,5 AG male M24x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Pt100 Analogue input via optional Com.G@te via optional Com.G@te via optional Com.G@te Analogue outpu via optional Com.G@te via optional Com.G@te via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Operating Data Permissible ambient temp. 5 to 40 °C 5 to 40 °C 5 to 40 °C Noise level 62 dB(A) - 62 dB(A) Filling volume min. 1.5 Liters | 0.4 gal 1.5 Liters | 0.4 gal 1.5 Liters | 0.4 gal Volume of expansion 2.8 Liters | 0.74 gal 2.8 Liters | 0.74 gal 2.8 Liters | 0.74 gal Cooling water connection - G1/2 AG G1/2 AG Cooling water consumption - 24 l/h 30 l/h Cooling water differential pressure min. - 0,5 bar | 72.5 psi 0,5 bar | 72.5 psi Cooling water pressure max. - 6 bar | 87 psi 6 bar | 87 psi Power supply 208V 2~ 60Hz 208V 2~ 60Hz 208V 2~ 60Hz Current max 18 A 16,5 A 17,5 A Fusing 20 A 2x20 A 2x20 A

  Read more less

  $28,900.00 - $31,450.00

  View options

• 

  Quantity Add to cart

  12" Wiped-Film

   Beaker & Wrench 12" Wiped-Film   Beaker & Wrench continues to be an industry leader, bringing together scientific expertise and real-world industry experience. Take the guess-work out of large scale distillation with their Wiped-Film Evaporation Turn-Key System. It arrives fully functional, meaning you can take advantage of the latest technology immediately and without additional installation or training costs. Other control processes can be subjective and vulnerable to user error, but their automated Wiped-Film Evaporation Turn-Key System will help maximize your product outcomes with greater productivity and maximum purity. 12” Wiped Film Measurements:76”[1.9m] x 30”[0.762m] x 85”[2.16m] Integrated 23″ Touch-Screen Control 200LFeed Tank ACS 100 60 CFMDry Screw Vacuum Pump Dual Stage Cold Trap-50/-100C Inlet and Outlet Gear Pumps(continuous flow) Single-Plug 240V Three-Phase to power the entire machine Six Zone Evaporator Body(1.1m² evaporative area) Consistency is Key Get greater consistency, purity, and confidence in every cannabis oil distillation when you use our system to monitor and optimize flow rate, temperature, pressure, and wiper speed (RPM) in real time. Then… NRTL Certified Each system is 6“ or 12” and constructed with fully compliant USA NRTL-certified components, including a display unit and two sensors to track the contents of both streams of fluid as it continuously travels through the glassware. Get started rapidly with… Set it and Forget it Fully continuous flow leaves behind less advanced methods with a dependable output of 15-30 liters per hour; maximizing efficiency and minimizing complications. Be assured of the quality of your system because we’re… Easy Installation Your system arrives ready to use immediately with all components primed for use. Just roll it off the lift gate and let it get to work. Meet demand and feel confident in the quality of your output with this turn-key system. Don’t make it complicated. Get it right. Lead time: 8-12 weeks from date of payment of 50% deposit, 50% due prior to shipping Specifications Skid Frame: + Dimensions (LxWxH): 76”[1.9m] x 30”[0.762m] x 85”[2.16m] + Weight:1,000 lbs [450Kg] + Material: Extruded Aluminum + 6” castors w/ brakes Shipping Information: + Dimensions (LxWxH): 82.5”[2.01m] x 36.5”[0.93m] x 87.5”[2.22m] + Total Weight: 1200 lbs [545Kg] Electrical Power Distribution Box: + Plug: SCAME SCM563P6W + Input Voltage: 240VAC 3 Phase with Neutral 60 Hz + External Circuit breaker: 60 amp + Nominal current: 24 amps Control Interface + Custom 27” high definition touch screen interface + automated controls + recipe folder +automated sensors and safeties +Error reporting +Software controlled Emergency shutdown Feed Tank: + Volume: 200 Liter + Material: 316 Stainless Steel + double jacketed + Max Temp: [95°C] + Heater: water jacket with 2500kW heater Feed Hose: + Length: 7’-0” [2.13m] + Voltage: 120VAC + Amps: 4.5 Amps + Max Temp: 450°F[220°C] + K-type sensor Rotor: + Wipers: PTFE (Polytetrafluoroethylene) + Mesh Baffles: 316 Stainless Steel + Motor Voltage: 240VAC + Motor Amps: 4(Max) + Motor Watts: 1kw (Continuous) + Speed: 0-400RPM + Dust and Splash Resistant Still Body / Wiped Film Evaporator: + Evaporation Surface Area: 1.1m² + Materials: 316 Stainless Steel + Heat Source: multi-zone Heat Band with independent thermocouples and control + Maximum Power: 12kWatts + Feed Inlet: KF25 + Top and Bottom Connections: 12” sanitary flange + Insulation jacket included Internal condenser: + multi-finger hairpin condenser + Materials: 316 Stainless Steel + Vacuum port: NW80 + Distillate port: KF25 + Residue port: 1.50” Tri-clamp + 2,500w heater + Cooling capacity 8,000w @80c Residue heater: 120VAC, 0.78 amp, 150°C Max Temp, K-type sensor 90W, UR Recognized Heat Pad Residue Outlet Conical shaped Mesh cleanable filter Dual heat pads Clog SensorLiquid level sensor Led lights Condenser Circulator: + Model: BWC-A120 + Bath Volume: ~12L + Bath Fluid: Beaker Kool + multi-fan & Radiator cooling system + Temperature range: 25 to 90°C + Temperature stability: ±1 °C + Heating capacity: 2.5 kW +Cooling capacity: 8kw @80c Gear Pumps: + Voltage: 48VDC + Amperage: 5A + Max Rate: 50.0 L/Hr + Heater: 120v, 0.5amp, 120°C Max Temp, K-type sensor + 45w, UL Recognized Heat Pad + Check Valve Included Dual Stage Cold Trap: + 2 stage cold trap optimized for maximum vacuum protection + Model: Huber TC100 & -100C + CC 508 -50C (1.5kw cooling @ 0c) + Temperature Range: -100 to 100°C Vacuum Gauge: + Model: KJ Lesker

  Read more less

  $475,000.00

  Quantity Add to cart

• 

  View options

  True Terpenes Tangie Sunrise

  True Terpenes Tangie Sunrise   Fragrance:  Floral Fruity Effects:  Creative Focus A burst of fresh lemon skin leads this fresh, bright flavor experience, followed by clean, piney notes, herbaceous green aromas, and a light floral background.   Storage Requirements:  Keep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. Dilution:  Terpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:  The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With Care:  Can cause skin irritation, do not use PRIOR to dilution.     Tangie Sunrise-Specific Certificates: Product Specification    Certificate of Analysis    Safety Data Sheet Food Safety    Company-Specific Certificates: ISO 9001:2015   GMP Certification     FSSC 22000  

  Read more less

  $135.00 - $2,250.00

  View options

Show more products