Shop Equipment

740 products


  • BVV 2540 Nanofiltration Skid

    BVV 2540 Nanofiltration Skid

    BVV 2540 Nanofiltration Skid Note: This product carries 8 - 12 week lead time   Perform organic solvent recovery or botanical extract purification with ease with our 2540 nanofiltration skid. Replace up to 7X 50L Rotary evaporators with a single Skid. BVV's 2540 Nanofiltration Skid is designed to meet Class 1 Division 1 standards. With the ability to recover 30 gallons of ethanol per hour without the application of heat, preserving target compounds and utilizing a fraction of the energy consumption of a traditional falling film qualifying our 2540 Nanofiltration Skid for energy saving rebates.  Processing Power Capacity: 15 GPH or 30 GPH of solvent recovery.  Solvents:  Ethanol, Methanol Specifications 4X 2540 nanofiltration housings Stainless steel 6GPM pump with PTFE seals 7.5HP C1D1 1750 RPM Motor 7.5HP VFD 1/60/230 NEMA 4X enclosure (13A) Insulated 2"x18" Heat Exchanger Polyscience 1.5HP Chiller 230/60/1/23.1 700PSI Pressure Relief Valve C1D1 Flowmeter 2X 0-1000 PSI Pressure Gauges 1.5" Intake & Retentate Lines 1/2" Permeate & Pressure Relief Lines Footprint (DxWxH) 30"x39"x79" Weight: 400 lb Maximum Pressure Rating: 700PSI Performance Variable Frequency Drive-based flow control Complete pressure control with manual pressure controls  Retentate cooling with inline Heat exchanger & chiller 700PSI pressure relief valve with diversion line *Components shown are subject to change**This unit is meant for bulk solvent recovery, 90% of the total volume of solvent an additional solvent recovery apparatus is recommended to evaporate to dryness*

    $41,000.00 - $45,000.00

  • Jacketed Reactor with Motor and Collection Vessel

    Jacketed Reactor with Motor and Collection Vessel

    Jacketed Reactor with Motor and Collection Vessel This jacketed reactor kit includes your choice of a C1D1 motor, standard motor, or non-electric air powered motor (air compressor required). If using an electric motor it will require wiring to the included speed controller. Using the jacketed reactor to heat your solution, use your reactor to mix your solution during the heating process. The condenser and collection vessel allow you to recover residual solvents up to 100L. The collection vessel includes a dip tube to empty the vessel and a 1/4" JIC flare to input pressure into the base to assist in emptying the tank through the dip tube.  This system does NOT include a heater or chiller, please inquire with your account representative for recommendations based on your application! Jacket connections are 1/2" hose barbs.     Mixer Type Pneumatic Electric C1D1 Electric Horsepower 3/4 HP 3/4 HP 1 HP Power Air Compressor 120V 220V 1ph Reactor Size 150L Collection Size 50L / 100L Jacket Connections 1/2" Hose Barb

    $7,022.00 - $13,690.00

  • 65 Gallon All-Mesh Bubble Wash Bags

    65 Gallon All-Mesh Bubble Wash Bags

    65 Gallon All-Mesh Bubble Wash Bags The Press Club Wash Bags are the last set of bubble wash bags you'll ever own!  Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. The Press Clubs bubble wash bags are hand sewn with their proprietary pink stitching, making them 2x stronger than competitors.  You can be confident their bags will perform the same no matter if it's your 1st or 1000th wash.  They are so confident their bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, they will be more than happy to replace the bag for you!  KEY FEATURES Fits All Standard 65 Gallon Vessels Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag)

    $149.95

  • Hubbell Process Water Heater 240V 3P

    J636T Hubbell Process Water Heater 240V 3P with Pump

    Hubbell Process Water Heater 240V 3P   Process Water Heater 6 Gallon Stainless Steel ASME Vessel 36 kW, 240 volt, 3 phase  Complete with electrical operating controls including the following: magnetic contactor, immersion elements, digital temperature controller with safety hi-temperature cut out, low water cut out, and an ASME rated combination temperature and pressure relief valve. Unit is factory assembled, insulated, jacketed, wired, and tested. Unit is ready for electrical and plumbing service connections. This kit includes a stainless steel pump to continuously circulate water through a closed loop system, an expansion chamber may be needed. Professional installation of water lines by a certified plumber is recommended.  Water Heater Features Industrial Grade Construction Stainless steel pressure vessel provides maximum service life ASME Section VIII stamped vessel ensures high quality construction Heavy duty construction withstands demanding industrial use Packaged with all electrical operating controls for efficient installation Small reserve capacity lowers peak power demand and reduces operating costs in systems with ON / OFF cyclical demand     Hubbell V636T Heater Specs Model J636T Voltage 240V Current Draw (A) 87 Heating Wattage (kW) 36 Storage Capacity (Gal) 6 Inlet / Outlet Connections 3/4" MNPT     Circulation Pump Specs Model AHWS-25-60-180 Material Stainless Steel Power 40 W Max Head (Ft.) 18 Max Flow (GPM) 15.8 Max Water Temp (°C) 110 Voltage  220VAC / 1ph Current Draw (A) .2 Max Ambient Temp (°C) 40  

    $6,600.00

  • SDA 3A (100% ABV) Lab Grade

    SDA 3A (100% ABV) Lab Grade

    Product Description: Ethanol 200 Proof SDA 3A  Ethanol 200 Proof SDA 3A is a premium-grade denatured alcohol commonly used across industrial, laboratory, and commercial applications. Formulated with 200 proof ethanol (100% pure ethyl alcohol) and denatured with methanol, SDA 3A is non-consumable while retaining its exceptional solvency and evaporative properties.  Key Features:  High Purity: 200 proof ethanol ensures maximum concentration and efficacy.  Specially Denatured: Denatured with methanol, making it suitable for industrial and laboratory use without beverage tax requirements.  Versatile Solvent: Ideal for use in cosmetics, pharmaceuticals, and cleaning formulations, as well as industrial cleaning and manufacturing.  Fast Drying: Evaporates quickly and leaves minimal residue, making it excellent for precision cleaning and preparation.  Typical Applications:  Personal Care Products: Used as a solvent in cosmetics and fragrances.  Pharmaceuticals: Key ingredient in antiseptics, sanitizers, and medicinal preparations.  Industrial Use: A go-to solvent for cleaning, degreasing, and chemical processing.  Laboratory Reagent: Suitable for chromatography, chemical synthesis, and sample preparation.  Specifications:  Ethyl Alcohol Content: 100% (200 proof)  Denaturant: Methanol  Chemical Formula: C2H6OH Molecular Weight: 46.07 CAS Registry Number: 64-17-5 Appearance Colorless Liquid Odor: Characteristic Density 0.78-0.8 g/cm3 Boiling Point: 64.7 °cat 1,013 hPa  Solubility in water: Completely Soluble GHS Pictograms:    GHS Signal Word: Danger GHS Hazard Statements: H225 GHS Precautionary Statements P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 UN Identification Number: 1170 Proper Shipping Name: Ethanol Solutions  Transport Hazard Class: 3 Packing Group: II DOT Placard: SDA 3A 200 Proof Tech Grade Safety Data Sheet (SDS) SDA 3A 200 Proof Tech Grade Certificate of Analysis (COA)

    $14.00 - $1,890.00

  • Ai DigiM 10L 300C 1200 RPM Digital Heating & Stirring Mantle

    Ai DigiM 10L 300C 1200 RPM Digital Heating & Stirring Mantle

    Ai DigiM 10L 300C 1200 RPM Digital Heating & Stirring Mantle Across International heating and stirring mantles come standard with a digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds.The DigiM mantle has two sets of thermocouples for proper temperature and speed detection. The heating jacket is pre-treated before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment. Model  DigiM10  Electrical requirements  110V 60Hz 1-Phase, 2050 watts, 24A or 220V 50/60Hz 1-Phase, 2050 watts, 12A  Heating  Ambient to 300°C  Stirring  Min. speed: 110 rpm, max. speed: 1200 rpm  Motor power: 40 watts Motor type: brushless DC motor  Controller  PID control with digital temperature and rotation speed display  External thermocouple  Type: PT100 Cable length: 43 inches Stainless steel probe length: 15 inches Stainless steel probe diameter: 5 mm  Flask holder  Maximum flask capacity: 10 liters Top opening diameter: 11.75 inches Depth: 6.5 inches  Dimensions (WxDxH)  Unit: 18 x 17.5 x 13 inches, shipping: 22 x 21 x 18 inches  Weight  Unit: 30 lbs, shipping: 40 lbs  Safety  Thermocouple failure protection  Certification  ETL tested to UL and CSA standards (optional), CE (standard)  Warranty  One year   Standard package    Part description  Quantity Part image  Ai DigiM 10L digital heating & stirring mantle 1 pc   External temperature probeDigiM05, DigiM2, DigiM5: Cable Length: 40”,  Probe Length: 9” DigiM10, DigiM20: Cable  Length: 43”, Probe Length: 15” 1 pc  Internal temperature plug 1 pc   Boss head DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs   Stainless steel support rod DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs    PTFE-coated stir bar 2 pcs    PTFE-coated magnetic stir bar remover 1 pc 4 prong stainless steel clamp opens to 3 1/2" DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs  User's manual 1 pc

    $1,190.00 - $1,990.00

  • NRE 5L Main Condenser

    NRE 5L Main Condenser

    NRE 5L Main Condenser This condenser directly connects to our 5L Neocision ETL Lab Certified Rotary Evaporator (SKU: NRE-5L).  NOTE: Condenser does not come with GL caps and barbs or gaskets.   Specifications Connection Type and Size To Bump Trap Flange ID32/OD50 (mm) To Collection Flask Flange ID22/OD37.5 (mm) Condenser Input/Output GL14 Vacuum GL14

    $420.00

  • Sale -17% Sheldon Manufacturing - FORCED AIR OVEN, 13.8 CUBIC FEET, 230V

    Sheldon Manufacturing - FORCED AIR OVEN, 13.8 CUBIC FEET, 230V

    Sheldon Manufacturing - FORCED AIR OVEN, 13.8 CUBIC FEET, 230V The SHEL LAB SMO14-2 features 14 cubic feet of economical oven space. The independent overtemperature safety feature is user adjustable and provides added safety. The forced, blower-assisted airflow design offers excellent temperature uniformity and fast recovery. A turbo blower and heavy-duty motor combine to direct air over the shelves and samples for even, constant drying, curing, and baking.    The large capacity SMO ovens are perfect for high volume sample and drying applications, including production processes. These units are especially ideal for glassware drying.   These SHEL LAB Ovens Feature: Three-inch Adjustable Exhaust Port Stainless Steel Shelves Independent Overtemperature Safety High-Temperature Silicone Door Seal Added docking collars to intake and exhaust ports to allow ducting to be attached for venting exhaust out of the workspace Shelf standards moved to the sides of the unit for easier shelf installation  No Exposed Heating Wrap Around Insulation Durable Powder Coat Paint Exterior Finish Digital Timer 24 Month Limited Warranty

    $6,755.00$5,600.00

  • 10LB+ EVO Certified Closed Loop Extractor

    10LB+ EVO Certified Closed Loop Extractor

    10LB+ EVO Certified Closed Loop Extractor The 10LB+ EVO Certified Closed Loop Extractor builds upon the proven success of the 5LB EVO, pushing the boundaries of performance, capacity, and innovation. Tailored for extractors scaling up their operations, this system retains the advanced features of its predecessor while offering increased throughput and operational efficiency to meet the demands of larger-scale production. With a rugged design suited for both cured and fresh frozen materials, the 10LB+ EVO supports low-temperature extractions and rapid solvent recovery, leveraging 1.5" full-bore recovery lines to reduce cycle times without compromising on extract quality, safety, or ease of operation. Optimized for a 10-pound extraction process at a 5:1 butane-to-biomass ratio, the system includes dual 55LB jacketed and baffled solvent collection/recovery tanks and an additional jacketed material column for pre-packing. This feature enhances efficiency and ensures seamless processing. With 3X 6"x36" jacketed material columns, each equipped with individual inline CRCs (Color Remediation Columns), the 10LB+ EVO guarantees maximum extraction efficiency, exceptional extract purity, terpene preservation, and unmatched filtration flow rates. Engineered for compliance and reliability, the 10LB+ EVO is peer-reviewed and 3P-certified to meet or exceed Class 1 Division 1, NFPA 58, and ASME standards, incorporating 3A sanitary compression and Tri-Clamp fittings for durability and precision. Capable of processing 80+ pounds of biomass per 8-hour shift, this system delivers the scalability, precision, and affordability extractors need to elevate their production capabilities. Key Features 1.5" Full-Bore Recovery LineAccelerate recovery with oversized 1.5” lines, minimizing cycle times and boosting throughput. Inline and Independent Adsorbent Filtration ColumnsEnsure pristine extract clarity and unadulterated terpene profiles with individual inline CRCs for each material column. Optimized for maximum flow rates and minimal retention time to preserve flavor. Independent Solvent InjectionReduce downtime and streamline operations with independant solvent injection for smooth transitions and increased efficiency. Additional Standby Material ColumnIncrease throughput with an extra pre-packed material column, ready to swap in for non-stop processing. Sanitary Compression and Tri-Clamp FittingsBuilt for reliability, the system’s sanitary compression and Tri-Clamp fittings ensure leak-proof assembly and simplified maintenance. Processing Power Capacity Per Batch: 10LB Cycle Time: 30-45 Minutes* Capacity: 80+lb, per 8-hour shift* Extracts: isolate/sauce, distillate, vape pens, shatter, and wax/sugar *Cycle Time & Capacity vary based on heater and chiller pairing* Specifications 3X 6"x36" 5LB Material Column 3X 6"x6" Adsorbent Filtration Column 3X 1-5um Dutch Weave Sintered disk filter stacks 1.5"X 48" Braided Inline molecular sieve recovery line 10X 1.5" Certified Borosilicate Sight Glasses 5X 250 PSI ASME Safety Valves 5X -30hg-250PSI Compound Pressure Gauges 1.5" Full Bore Recovery Lines 1/2" Compression process Flow lines Footprint (DxWxH) 30"x68"x79" Weight: 650 lb Maximum Pressure Rating: 250PSI   Compliance Class 1, Division 1 compliant Designed to ASME standards NFPA 58 LPG compliant 3P Certified 

    $23,000.00

  • Synder NFG Membrane (600-800Da MWCO)

    Synder NFG Membrane (600-800Da MWCO)

    Synder NFG Membrane With a pore size ranging between 0.1-10nm,Synder Filtration's nanofiltration membranes enable the passage of water and certain salts through the membrane while effectively retaining multivalent ions, low molecular weight molecules, sugars, proteins, and various organic compounds. A result of extensive research and development, Synder's NFS, NFX, NFW, and NFG nanofiltration membrane products have demonstrated exceptional resistance to fouling, a high level of selectivity, and the physical durability necessary for diverse industrial separation processes. Specifically, NFS, NFX, and NFW exhibit outstanding rejection of MgSO4 and lactose, while NFG is designed to partially remove monosaccharides from oligosaccharides. These nanofiltration membranes, as a whole, have the capacity to significantly reduce levels of hardness, nitrates, sulfates, tannins, turbidity, color, total dissolved solids (TDS), and moderate levels of salt from feed water streams. The proven performance of Synder's nanofiltration membranes makes them well-suited for a broad spectrum of industrial applications including the desolvation of ethanol from botanical extract solutions. BVV utilizes 4X NFS 2540 Membranes inside our Nanofiltration Skid to recovery ethanol at 30 Gallons per hour.   Specifications Polymer: Proprietary PA TFC Approx. Molecular Weight Cutoff: 600-800 DA Typical Operating Flux 55-60 GFD Average Lactose Rejection: 60% Average MgSO4 Rejection: 50% Average NaCl Rejection: 10% Maximum Operating Pessure <95F/35C: 600PSI/41.4 Bar Maximum Operating Pressure >95F/35C: 435PSI/30 Bar Maximum Pressure Drop per Element: 15PSI/1.0 Bar Maximum Pressure Drop per hosing: 60PSI/4.1 Bar Maximum continuous Operation Temperature: 122F/50C Maximum CIP Temperature: 104F/40C Maximum Temperature Operating pH Range: 4-9 Ambient Temperature Operating pH Range: 4-10 Maximum Temperature Cleaning pH Range: 3-10 Ambient Temperature Cleaning pH Range: 3-10.5  

    $577.50 - $1,277.50

  • Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25

    Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25

    Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25 The DigiVac Bullseye Precision Gauge with Bluetooth is the world’s first wireless vacuum gauge featuring one-of-a-kind patented vacuum graphing and DigiVac’s ‘Vacuum Gauge’ app Versatile wireless vacuum gauge that you can monitor right from your phone or tablet (Apple ios and android) Enables remote monitoring and troubleshooting Set low and high alarm from your phone Email vacuum data to document leaks, baseline pressure or pump-downs Use battery power or standard microB-USB power Choose standard Thermocouple Plus sensor or the Upgraded Agilent 531 NPT sensor (this sensor configuration is CE and RoHs compliant), or the Agilent 536 NPT sensor which includes an integrated baffle to extend the life of the sensor by helping to protect it from contamination Portable and Precise Rugged thermocouple vacuum gauge ideal for understanding: Leaks, Pump Downs, Out-gassing or Stable Systems Includes a powerful magnet and kickstand to enable hands-free operation Long battery life and versatility with 12 different measuring units (micron, Torr, Inches of Hg, kPa, Inches of H20, millitorr, mbar, Pa, PSIA, mm of Hg, bar, and mm of H2O) Calibrated under actual vacuum against a NIST standard.  Graphing and Analysis Patented vacuum graphing displays vacuum and time data Visual graphing right on the display that identifies current system status Vacuum Analytics to quickly identify vacuum pressure trends Graphical display for quick determination of vacuum level Bluetooth Bullseye Gauge Applications Vacuum pump testing Baseline vacuum pump performance Transformer dry-out Schlenk line monitoring Botanical oil processing Distillations Vacuum Process Monitoring Technical Specifications Units Torr, mbar, bar, kPa, inHg, mm Hg, millitorr, microns, inches of water, PSI, Pa Control Range 1E-4 – 1000 Torr Range with Accuracy .001-5 Torr Sensor Type Agilent 531 (NPT), Agilent 536 (NPT, KF15, or KF16), VGT500 Dimensions 6.2”H x 3.7”W x 1.3”D Certifications ROHS and CE

    $735.00 - $845.62

  • Sale -9% DigiVac SNAP Vacuum Controller | Simple, Nimble, Automatic Process Control | Up to 8 Recipes

    DigiVac SNAP Vacuum Controller | Simple, Nimble, Automatic Process Control | Up to 8 Recipes

      DigiVac SNAP Vacuum Controller | Simple, Nimble, Automatic Process Control | Up to 8 Recipes   Description SNAP Vacuum Controller | Simple, Nimble, Automatic Process Controller with up to 8 Recipes SNAP: Automatic Vacuum Process Controller | Vacuum control and venting with the touch of a button or twist of a dial Vent your vacuum chamber or equalize your system with the touch of a button instead of pulling hoses or turning valves Treat material in chamber more gently by implementing kinder ramp rate controls which is ideal for freeze drying, vacuum drying or lyophilization applications Vacuum Controller with onboard ramp rate recipe control. Set up to 8 recipes based on time and pressure setpoints. Dashboard pushbutton control for START, STOP functionality for each channel allows you to automatically vent or isolate your system with a push of a button Ideal for automating and simplifying vacuum chamber pressure control. SIMPLE – SIMPLIFY YOUR LAB & CONTROL MORE WITH LESS Applications: vacuum chamber (from 1 liter to 1000 liters) research, vacuum ovens/vacuum drying, vacuum furnaces, large scale food processing, microwave drying, composites, rotary evaporators, falling film systems Fine control of target vacuum pressure for more precise processing and research Enables using reliable and long lasting rotary vane pumps & dry scroll pumps in applications where diaphragmpumps were previously required Keeps vacuum pumps near their base pressure resulting in greater longevity NIMBLE – MAXIMIZES THROUGHPUT & PUMPDOWN SPEED Largest flow paths available to insure maximum flow for faster evaporation Maximize throughput and pump down speed with a 20 mm vacuum path (almost full KF25 orifice) AUTOMATIC PROCESS – PRECISION CONTROL & INTUITIVE DESIGN Automatic Vacuum Process Controller | precise automated control with programmable recipes and graphing of vacuum levels Innovative valve control performs both proportional throttle and bleed vacuum control (vent to atmosphere) The integrated bleed design allows you to quickly vent to atmosphere to stop bumping during processing Numerical readings right on the LCD screen and one touch buttons: VENT, CLOSE (isolate, close all valves) and FULL VAC (fully opens the valve for vacuum pump and closes the vent valve) SNAP Vacuum Controller Wetted Material Options Aluminum (6061) wetted surfaces Stainless steel (304) wetted surfaces Measurement and Control Range: 1 Torr to 775 Torr (standard) Need millitorr range?: SNAP has a RJ45 Port for adding an additional sensor to extend the measurement range. We recommend the addition of the DCP Quantum to be able to monitor and control from 0.01 Torr to 1000 Torr.   DigiVac SNAP Data Sheet  DigiVac SNAP Operational Manual  DigiVac SNAP Quick Start Guide 

    $5,100.00$4,650.00

  • So-Low Explosion Proof Refrigerators (Manual Defrost) 30 cubic ft. DHH4-30SDRX

    So-Low Explosion Proof Refrigerators (Manual Defrost) 30 cubic ft. DHH4-30SDRX

    So-Low Explosion Proof Refrigerators (Manual Defrost) 30 cubic ft. DHH4-30SDRX   Please note: This Product may carry up to an 8 week lead time!   Description Hazardous Location Refrigerators(+4°C) are designed to meet National Fire Protection Agency (NFPA) and OSHA guidelines for the refrigerated storage of volatile and non-volatile materials in Hazardous Locations, Class 1, Division II, Group C & D. Power cord is not included. Final power connections at site must be hardwired to meet local codes.  All spark generating electrical components and connections (compressor, thermostat) are isolated and sealed in vapor-proof enclosures. Electrical wiring is hardwired for additional safety measures.  So-Low's various Explosion Proof / Manual Defrost Freezers, Refrigerators, and Combination units, offer a diverse range of options to fit your needs for Explosion Proof products. Ranging from 11 cubic feet to 30 cubic feet, these units are ideal for products of any size. Two inch solid urethane foam insulated doors, sturdy cam-lift hinges, and "lock-open" feature for "hands-free" access provide a secure and sturdy environment. Features 22 Gauge Cold Roll Steel Exterior 26 Gauge Galvanized Steel Interior High Luster Baked Enamel Surface Coating 2-3/8 inch (6cm) Urethane insultation 2-Inch Solid Urethane Foam Insulated Doors Sturdy Cam-Lift Hinges With Lock-Open Feature Adjustable Cantilever Shelves (Epoxy Coated) 6-Inch Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat Manual Defrost UL Listed   Product Specification Manufacturer So-Low Temperature Range 1°C to 10°C Capacity 30 cubic ft. Exterior w x d x h (inches) 35'' x 35'' x 72'' Interior w x d x h (inches) 32'' x 22.5'' x 65'' Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves Five adjustable epoxy coated Insulation Polyurethane foam Refrigerant R134A CFC free Compressor 1/2 hp Evaporator Cold Wall Thermostat Exterior adjustable Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 7/15 Supply Plug none/ hardwired Shipping weight 575 lbs

    $8,790.00

  • J-KEM Model 150

    J-KEM Model 150

    J-KEM Model 150  An ideal controller for applications that don’t require the precise regulation of J-KEM’s 200-Series controllers. This compact unit packs 1200 watts of power, sufficient for 5 L heating mantles, many ovens, and other devices. Built with J-KEM’s state-of-the-art PID process controller, but does not contain J-KEM’s power control computer. Specifications: 120vac, 10 amps, 1200 wattsWarranty: 2 Years The temperature range desired determines the probe/thermocouple type:   J [black] (0 – 800° C) K [yellow] (-50 – 1200° C) T [blue]  (-200 – 250° C)   Weight: 4 Dimensions: 5.4 x 3.75 x 2.5 in PURCHASE WITH OR WITHOUT SYSTEM ACCESSORIES Complete system includes: one controller, one Teflon thermocouple (12″ long, 1/8″ diameter), one connecting cord, and one 14/20 joint adapter.

    $754.00 - $868.00

  • J-Kem Gemini-2 Dual Temperature Controller

    J-Kem Gemini-2 Dual Temperature Controller

    J-Kem Gemini-2 Dual Temperature Controller  Gemini-2 Dual Temperature Controller displays two temperature controllers in a single cabinet to regulate two independent reactions. Each channel is 1200 Watts MAX (1800 Watts total), 15 Amps @ 120VAC, The Gemini is one of J-KEM’s most versatile controllers featuring high power outlets and a 100 hour digital timer (on channel 1) to turn heating OFF (or ON) at a user entered time. Features Included: Over-temperature protection circuits with audible alarms, dual temperature displays, selectable operating modes, double fused, and 100% solid state design. The USB port on the back panel of the controller is an interface to J-KEM’s KEM-Net software.  Safety features include: 100% solid state, double fused, audible error alarm, and over temperature circuitry that disconnects power if an over temperature condition occurs. Specifications: Dimensions: 3.5" H x 7.75" W x 8.75" D Power: 15 Amps @ 120VAC, 1200 Watts MAX/Channel, 1800 Watts (Total) Weight: 7 lbs Complete System Includes: One controller Two Teflon thermocouples (12″ long, 1/8″ diameter) Two connecting cords Two 14/20 joint adapters

    $1,569.00 - $1,921.00

  • The Press Club 5" x 5" ROSIN BAGS

    The Press Club 5" x 5" ROSIN BAGS

     5" x 5" ROSIN BAGS  The Press Club brings science to the art of rosin pressing. We pride ourselves in making the toughest and strongest rosin bags on the market. After years of research and lab testing, all our rosin bags are now made with our proprietary pink stitch and come with a ZERO BLOWOUT GUARANTEE™. If you ever get one, we'll replace the bag. It's that simple. Available in 25, 37, 50, 75, 90, 120, 160 and 220 micron. 5” x 5” Inch 25-Pack Pre-Flipped Inside-Out 100% Food-Grade Nylon Solvent & Boil Resistant High Pressure Resistance (Over 20 Tons) High Heat Resistance (Up To 375° F) Reusable Over 5x (Simply Wash With Alcohol) Covered By The Press Club’s Zero Blowout Guarantee Satisfaction Guarantee & 365-Day Return Policy Made In USA General Micron Guideline: Dry Sift & Bubble (5, 10, 15, 25, 37, 50) | Flower (75, 90, 120, 160, 220)

  • Sale -10% True Terpenes Lemon Kush

    True Terpenes Lemon Kush

    True Terpenes Lemon Kush   Fragrance:  Lemon Mango Pepper Florals   Effects:  Soothing Focused   Lemon Kush brings the tangy sweet of lemons together with the skunky, earthy flavors that Kush is known for. The blending continues to the effects. Lemon Kush may put you on the couch, but you’ll be ready to talk.   Storage Requirements:  Keep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. Dilution:  Terpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:  The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With Care:  Can cause skin irritation, do not use PRIOR to dilution.       Lemon Kush-Specific Certificates: Product Specification   All Natural  Certificate of Analysis    Safety Data Sheet    Food Safety  Company-Specific Certificates: ISO 9001:2015     GMP Certification     FSSC 22000  

    $121.50 - $2,250.00

  • Sale -10% True Terpenes Jack

    True Terpenes Jack

    True Terpenes Jack All sales are final. Orders can be refunded prior to fulfillment and shipping but once the order has been fulfilled and/or shipped, no refunds will be issued. Due to the hazardous nature of our product, we are unable to accept returns. (Please Note: This product has 2 week  lead time)     Fragrance:  Gas Lemon Clove   Effects:  Uplifting Insightful   Named for a legendary activist, this profile is a legend itself. Heavy fuel aroma spills out with pepper, citrus balancing it out.   Storage Requirements:  Keep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. Dilution:  Terpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:  The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With Care:  Can cause skin irritation, do not use PRIOR to dilution.       Jack-Specific Certificates: Product Specification   Certificate of Analysis    Safety Data Sheet    Food Safety    Company-Specific Certificates: ISO 9001:2015     GMP Certification     FSSC 22000  

    $121.50 - $2,250.00

  • Sale -10% True Terpenes Grape Ape

    True Terpenes Grape Ape

    True Terpenes Grape Ape   Fragrance:  Grape Berry Lavender Pine   Effects:  Peaceful Serene   The Grape Ape cultivar that inspired our terpene profile is descended from cultivars as varied as Mendocino Purps, Skunk, and a legendary Afghani landrace. The combination of these parents has created a profile that gives the aroma of grapes, tropical fruit, earth and a pine forest. These varied smells merge into a soothing wave. Linalool and ocimene lend a hand with floral, fruity tones and enhance the chill vibe of myrcene.   Storage Requirements:  Keep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. Dilution:  Terpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:  The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With Care:  Can cause skin irritation, do not use PRIOR to dilution.     Grape Ape-Specific Certificates: Product Specification    Certificate of Analysis    Safety Data Sheet    Food Safety    Company-Specific Certificates: ISO 9001:2015     GMP Certification     FSSC 22000  

    $121.50 - $2,250.00

  • Sale -10% True Terpenes Grandaddy Purple

    True Terpenes Grandaddy Purple

    True Terpenes Grandaddy Purple   Fragrance:  Sweet Floral Earth   Effects:  Soothed Tired Hungry Euphoria   Grandaddy Purple (GDP) is a low from California with deep purple blooms. It is a cross between Big Bud and Purple Urkle. The effects of this sweet, grape/berry flavored, powerful strain are both euphoric and soothing. In addition to feeling soothed, patients describe feeling tired, happy, and hungry.   Storage Requirements:  Keep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. Dilution:  Terpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:  The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With Care:  Can cause skin irritation, do not use PRIOR to dilution.     Grandaddy Purple-Specific Certificates: Product Specification   All Natural  Certificate of Analysis    Safety Data Sheet    Food Safety    Company-Specific Certificates: ISO 9001:2015     GMP Certification     FSSC 22000  

    $121.50 - $2,250.00

  • Sale -10% True Terpenes God's Gift

    True Terpenes God's Gift

    True Terpenes God's Gift     Fragrance:  Earthy Pine Berry   Effects:  Soothing Couch-Lock   God’s Gift is as the name implies descended from heaven. It’ll put your head in the clouds. Earthy musk and pine aromas mix with a floral, berry sweetness. Storage Requirements:  Keep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. Dilution:  Terpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:  The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With Care:  Can cause skin irritation, do not use PRIOR to dilution.     God's Gift-Specific Certificates: Product Specification     Certificate of Analysis    Safety Data Sheet    Food Safety    Company-Specific Certificates: ISO 9001:2015     GMP Certification     FSSC 22000  

    $121.50 - $2,250.00

  • Sale -10% True Terpenes Forbidden Guava

    True Terpenes Forbidden Guava

    True Terpenes Forbidden Guava   Fragrance:  Hybrid Fruity Citrus Effects:  Rest Calm   Bold and juicy, Forbidden Guava fills the nose with guava, cherry, and papaya. The complex profile marries sweetness, warm florals, and a distinctly tropical richness, from the aroma’s yeasty cheese base.   Storage Requirements:  Keep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. Dilution:  Terpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:  The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With Care:  Can cause skin irritation, do not use PRIOR to dilution.     Forbidden Guava-Specific Certificates: Product Specification  Certificate of Analysis   Safety Data Sheet  Food Safety  Company-Specific Certificates: ISO 9001:2015    GMP Certification    FSSC 22000  

    $121.50 - $2,250.00

  • Sale -10% True Terpenes Sugar Cookie

    True Terpenes Sugar Cookie

    True Terpenes Sugar Cookie Get your holiday baking off to a sweet start with Sugar Cookie terpene strain. Notes of soft sugar cookies fresh from the oven lead this dessert strain profile. We then added a swirl of blueberry frosting, a handful of juicy berries, and a hint of soft lavender florals to the mix for a tempting take on the sweet, fruity cross between Crystal Gayle, Blue Hawaiian, and Sensi Star. Recommended Use and Restrictions on Use This product is concentrated and should not be used undiluted. Based on your use of this product, determine appropriate warnings and directions for your products and applications; also determine safety standards and conduct testing. Avoid contact between this undiluted product and skin, eyes, wood surfaces, and fabrics. Keep this undiluted product away from children and pets. Discontinue use if any adverse reaction occurs. This product has not been evaluated for safe use in e-cigarettes, or in any nicotine-containing or smoking-cessation product. Not for use with tobacco or nicotine. This product is not intended for use by those who are pregnant, nursing, or by those with serious health conditions including but not limited to high blood pressure and diabetes. This product is not intended to diagnose, treat, cure or prevent any disease. Store in original container, sealed tightly, in a cool, dry place away from sunlight or heat sources. This product should not be used beyond its stated expiry date. Products made with this item should be tested to determine suitable shelf life. WARNING True Terpenes cannot anticipate all conditions under which this information and this product, or the products of other manufacturers in combination with this product, may be used. It is the user’s responsibility to stay current with respect to applicable laws and regulatory investigations and findings, and to ensure safe conditions for use, handling, storage and disposal of the product. The user assumes all liability for loss, injury, damage or expense due to unauthorized or improper use, and True Terpenes disclaims all such liability. The information in this sheet was written based on knowledge and experience currently available. To date, True Terpenes has not received any evidence confirming that this product has caused any adverse health consequences. The above information relates only to this product and not to its use in combination with any other material or any particular process, and is designed only as guidance for the handling, use, processing, storage, transportation, and disposal. It should not be considered as a guarantee or quality specification. True Terpenes has performed no testing on this product in e-cig/vaping applications. Applying heat to a compound or mixture of compounds may promote new product formation by thermal degradation. New products could include harmful or potentially harmful compounds. It is the sole responsibility of the individual(s) purchasing this product to assess its safety in the final application. The above information is based on data provided by and collected from recognized sources such as distributors, manufacturers, and technical groups and is considered to be accurate to the best of True Terpenes’ knowledge, based upon current information as of the publish date of this document. It is the responsibility of the user to review all safety information about this product and determine its safety and suitability in their own uses, processes, and operations. Appropriate warnings and safe handling procedures should be provided to all handlers and users of this product, taking into account the intended use and the specific conditions and factors relating to such use in accordance with all applicable laws and regulations. COA & Ingredient Disclaimer This Certificate of Analysis contains specifications and results provided by contract laboratories external to True Terpenes. This document does not relieve the purchaser from conducting their own tests in order to verify the suitability of this product for its application and to comply with all relevant legal requirements for any goods into which this product is incorporated. Botanically derived and/or synthetic compounds found in this product may contain trace compounds which can potentially result in a slight variance between lots. The limits in this Certificate of Analysis may not be inclusive of all compound regulations in your region. Shelf Life Disclaimer Unless otherwise stated on the label, COA, or SDS, the intended use for this product is one year from the date of purchase or listed manufacturing date. It is crucial to observe product label directions and store terpenes properly to maintain product integrity. Terpenes are volatile organic compounds (VOCs) and may degrade over time. Customers may contact our quality department at info@trueterpenes.com to obtain further information regarding a specific production lot. Nutritional Statement True Terpenes certifies that, to the best of our knowledge, the product listed above does not contribute to the nutritional value of flavors due to their extremely low usage levels and therefore falls under the nutritional labeling exemption defined in Section 101.9(a) and (j) of Title 21 of the Code of Federal Regulations. Testimonial Disclaimer In accordance with the FTC guidelines concerning the use of endorsements and testimonials in advertising, please be aware of the following: Testimonials appearing on this website are received in various forms via a variety of submission methods. To the best of True Terpenes’ knowledge, the testimonials reflect the real-life experiences of individuals who used our products and/or services. However, individual results may vary. We do not claim, nor should the reader assume, that any individual experience recounted is typical or representative of what any other consumer might experience. Testimonials are not necessarily representative of what anyone else using our products and/or services may experience. The testimonials displayed are given verbatim except for grammatical or typing error corrections. Some testimonials may have been edited for clarity, or shortened in cases where the original testimonial included extraneous information of no relevance to the general public. True Terpenes is not responsible for the opinions or comments posted on this website, and does not necessarily share the opinions, views, or commentary of postings on this website. All opinions expressed are strictly the views of the poster or reviewer. Testimonials on this website are not intended, nor should they be construed, as claims that the products or services mentioned can be used to diagnose, treat, cure, mitigate or prevent any disease. To the contrary, our products are not intended to diagnose, treat, cure, or prevent any disease. No testimonial has been clinically proven or evaluated, and no health, functional or structural claims whatsoever were made and no statements on this website have been evaluated by the FDA or any other regulatory agencies. Intended Purchasers; Dilution Before Use The products offered on this website are intended for purchase by lawfully operating businesses. These products are not intended for purchase by consumers. Each of these products should be carefully diluted prior to use. COA Sugar Cookie COA Lot# 23081108 Sugar Cookie COA Lot# 23080917 Sugar Cookie COA Lot# 23080918 Sugar Cookie COA Lot# 23081608 Sugar Cookie COA Lot# 23081609 SDS Sugar Cookie SDS PDS Sugar Cookie PDS Company Certificates ISO 9001:2015 GMP Certification FSSC 22000 Food Safety True Grade Quality TRUE GRADE™ It is our promise to you. Our isolated terpenes are triple-distilled making them the cleanest terpenes in the world. Fresh out of the bottle, undiluted, every single one of our products bests the most rigorous consumer safety standards. GMP | ISO-9001:2015 | FSSC 22000 Blended in cGMP facilities adhering to the requirements for a Quality Management System (QMS) specified by ISO 9001:2015 and FSSC 22000 standards. Analyzed Tested and passed True Grade™ safety specifications for residual solvents, pesticides and heavy metals. Stability Tested Rigorously tested with mid-grade distillate against separation, cloudiness and unacceptable levels of color change. We Qualify True Terpenes implements supply-chain control for all raw materials and is proud to provide True Terpenes’ qualification documents such as certificates, licenses and registrations to be qualified as your supplier. Undiluted We do not add PG, VG, PEG, MCT or Vitamin E Acetate to any of our products. Food Grade Manufactured in cGMP facilities using food grade ingredients. UV Protected This product is packaged in a cobalt blue, UV deterrent and food grade bottle with tamper evident seal. Made in the USA Formulated, blended, manufactured and fulfilled in the United States. Ships Worldwide True Terpenes ships its botanical aromatic blends worldwide. Refined Isolates This product contains ultra-pure, molecularly-refined terpene isolates. Only the best.   Storage RequirementsKeep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. DilutionTerpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With CareCan cause skin irritation, do not use PRIOR to dilution.

    $121.50 - $2,250.00

  • 4" Sweating Baskets

    4" Sweating Baskets

    4" Sweating Baskets     Sweat the terpene sauce o  of your crystallized compounds or dry out wet sugars using a tri-clamp spool.     Specifications:  304 Stainless Steel 25 Micron W: 4” H: 5”

    $17.00 - $55.00

  • ChemTek Wide Mouth Basket Support - Large

    ChemTek Wide Mouth Basket Support - Large

    ChemTek Wide Mouth Basket Support Support for the stainless micron mesh baskets.

    $100.00 - $350.00

  • ChemTek L550 Centrifuge

    ChemTek L550 Centrifuge

    ChemTek L550 Centrifuge L550 centrifuges provide excellent performance and easy operation in a compact design that saves valuable time and laboratory space. Specifications:  Power Supply:110V 50/60Hz Max Speed:4000 RPM Max RCF:3040xg Max Capacity:4x500ml Time Setting Range:1min - 99min Speed Accuracy:± 10r/min Noise: ≤65dB Power Consumption:750W Net Weight:115lbs   Comes with: (16) 50ml Tube (4) Regular Mouth Basket (4) Regular Mouth Stainless Jar Lid/Band (4) Four 50ml Tube Holder Insert (4) Regular Mouth Jar Spacer Insert (1) 50-pack 5”x 7” Double Stitched Fuge Bags (1) Terp SqueeGee (1) 100-Pack of Large Diamond Grip Gloves   ChemTek L550 Centrifuge User Manual ChemTek L550 Centrifuge SDS

    $4,700.00

  • Adapter M30x1.5 male to male

    Adapter M30x1.5 male to male

    Adapter M30x1.5 male to male   Adapter M30x1.5 male to male

    $238.00

  • Huber adapter M16x1f-1/2"m

    Huber adapter M16x1f-1/2"m

    Huber adapter M16x1f-1/2"m Adapter M16x1 f - R1/2 m Adapter M16x1 f - R1/2 m M16x1 female thread to R1/2 male thread

    $135.00

  • PTFE WFE Wipers - 3 Pack

    PTFE WFE Wipers - 3 Pack

    PTFE WFE Wipers   These wipers are designed for wiped film evaporators spinning counterclockwise. Pack of 3 Dimensions: 15.375L x .38W x .42D

    $350.00

  • Chemglass #45 Rodaviss Joint Cap w/ Hole

    Chemglass #45 Rodaviss Joint Cap w/ Hole

    Chemglass #45 Rodaviss Joint Cap w/ Hole   Threaded cap fits CG-172 outer joint, Rodaviss®. When used with CG-305 Viton o-rings, provides for greaseless high vacuum seal.

    $20.00

  • Beaker & Wrench 40L Complete Dosing System

    Beaker & Wrench 40L Complete Dosing System

    Beaker & Wrench 40L Complete Dosing System  Please note: This Product has 1 week lead time    For Wiped Film Evaporators  The 40L Complete Dosing System by Beaker & Wrench® is a continuous feed system that connects to any Wiped Film Evaporator effortlessly. Optimize your time and end results by dialing into your feed system. The Feed Gear Pump by Beaker & Wrench® gives the operator control over flow rate and freedom to load material into the flask without breaking deep vacuum. Once attuned with the flow rate, calculations become less of a guessing game and more of a formula. Distill as slow or as fast as needed!   The contents of this system include: Heated 40L feed flask Crude Cozy™ Digitally operated, heated Feed Gear Pump 4″ tri-clamp port on feed lid Inlet adapter (for your still) 6′ Heated Transfer Line (not pictured) Wattage: 90/ft, 120 Volts Maximum Temp: 150°C UL Listed 3 Channel PID Temperature Controller UL: E510826   How does it work?Crude is loaded into a heated feed flask, which then flows through the heated Gear Pump. The Gear Pump moves fluid through the gears while maintaining vacuum. Oil is then pulled towards the still body, ready for distillation!   Cleaning:Every Operator has their own preference in how they clean their Wiped Film Evaporator. Ethanol, Isopropyl alcohol or vegetable oil are viable options when looking to clean your Wiped Film. Step-by-step instructions are included in the manual!     Installation: Are you interested in having a Beaker & Wrench® technician install your Complete Dosing System? Click here for a quote! The advantage with having a technician perform installation is you can ask any and all questions necessary on how to process with your Wiped Film Evaporator!   What is the warranty?1 year manufacturer’s warranty on parts for exchange. Customer has 5 days from day of delivery to inspect equipment for breakages or damage.     ** Please indicate the inlet size of your still in the Notes section of your purchase. This will help us adapt to your set-up.  

    $13,500.00

  • Polyscience 3 HP High Capacity Chiller; Air-Cooled - Up to 10.5kW @ 20°C

    Polyscience 3 HP High Capacity Chiller; Air-Cooled - Up to 10.5kW @ 20°C

    Polyscience 3 HP High Capacity Chiller; Air-Cooled - Up to 10.5kW @ 20°C Key Specifications Description: 3 HP Chiller; Air-Cooled; Up to 10.5kW @ 20°C Display: LED Connectivity: Standard: RS232; Optional: RS485 Working Temperature Range °C: 5° to 35° Temperature Stability °C: ±0.5° Temperature Calibration Capability: 1-point  Key Features Chillers 2HP and up are not available outside of the United States High capacity cooling for lasers, EDM equipment, injection molding, and other heat removal applications Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled (3 HP models) Wide variety of pump options available     Common Specifications Working Temperature Range °F 41° to 95° Working Temperature Range °C 5° to 35° Cooling Capacity Up to 10.5kW @ 20°C Reservoir Capacity (gallons) 7 Reservoir Capacity (liters) 26.5 Reservoir/Tank Material Contact PolyScience for Options Reservoir Cover Screw-on Cap Cleanable Air Filter Yes Cleanable Fluid Filter Yes Temperature Stability °F ±0.9° Temperature Stability °C ±0.5° Display LED Display Resolution (Read) 0.1 Pump Type Contact PolyScience for Options Process Connections 3/4" (F) NPT Over-Temperature Protection / Failsafe Heater Control Yes Reservoir Liquid Level Indicator Yes Cool Command Refrigeration Technology Yes Reservoir Drain Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 30.5 x 37 x 42 in Overall Dimensions (L x W x H) (cm) 78 x 94 x 107 cm Compressor Size (HP) 3 Refrigerant R134a Shipping Weight (pounds) 570.0 Shipping Weight (kilograms) 259.0 Catalog Page Number 105   Operator's Manual  PDF Version 

    $15,350.00

  • Beaker & Wrench Outlet Pump

    Beaker & Wrench Outlet Pump

    Beaker & Wrench Outlet Pump Outlet pump comes with: – motor – heater/pump controller – mounting – pump (heated) – If you need custom please purchase custom adapters separately.  

    $7,200.00

  • So-Low Flammable Material Storage Freezer 30 cubic ft. DHH20-30SDFMS

    So-Low Flammable Material Storage Freezer 30 cubic ft. DHH20-30SDFMS

    So-Low Flammable Material Storage Freezer 30 cubic ft. DHH20-30SDFMS Please note: This Product may carry up to an 8 week lead time!     Description: Flammable Freezers are designed to meet National Fire Protection Agency  NFPA and OSHA guidelines for the frozen (-20°C) storage of flammable (volatile) material storage in general laboratory work areas.Upright and undercounter models. Designed exclusively to control flammable material, The So-Low Flammable Material Storage Freezers and Refrigerators are ideal for storage of any flammable material products. There are no electrical components located in the interior of the unit and the compressor's electrical components have been sealed in a vapor-proof enclosure for additional safety.  Units are supplied with a power cord to ease installation. Temperature control and temperature recorder options allow for an individualized intensity of temperature control and monitoring. Adjustable legs and shelves add more availability and storage options to fit your laboratories needs. Features: Solid Polyurethane Foam Insulated Doors Epoxy Coated Shelves Adjustable Shelves Adjustable Legs CFC-Free Refrigerant and Insulation  Adjustable Thermostat  Manual Defrost UL Listed     Product Specification Manufacturer So-Low Temperature Range -15°C to -20°C Capacity 30 cubic ft. Exterior w x d x h (inches) 35'' x 35'' x 72'' Interior w x d x h (inches) 32'' x 22.5'' x 65'' Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves Three, Fixed Shelves Insulation Polyurethane foam Refrigerant R404A CFC free Compressor 1/3 hp Condenser Hot Wall Evaporator Cold Wall Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 7/15 Supply Plug 5-15P NEMA UL listed Shipping weight 375 lbs. Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor.   Specification Data Sheet 

    $7,880.00

  • HUBER Unistat 815 Dynamic Temperature Control / Circulation Thermostat

    HUBER Unistat 815 Dynamic Temperature Control / Circulation Thermostat

    HUBER Unistat 815 Dynamic Temperature Control  (Please Note: There is a 2 - 3 weeks lead time)               Unistat Circulators are an ideal solution for fast and precise thermal control of externally connected applications. These systems offer rapid temperature change and a wide temperature range without having to change fluid. The new Pilot ONE controller features a navigation system with easily remembered icons and menus which are sorted by color to make routine work simpler. An amazing software guides you through your set up ensuring all the necessary settings are correct.   Unistat 815 208V Data sheet  Unistat 815 460V Data sheet  3 Year Warranty Extension    General Information & Temperature Controller Unistat 815208V Unistat 815460V Temperature range -85...250 °C -85...250 Temperature stability ±0.01 °C ±0.01 Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Alarm message optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL Protection class IP20 IP20 Dimensions (W x D x H) 18.11 x 23.78 x 65.55 inches 18.11 x 23.78 x 57.68 inches Weight 331 kg | 729.86 pounds 229 kg | 504.94 pounds Heating / Cooling Capacity Heating capacity 2 kW 2,6 kW Cooling machine air-cooled air-cooled Refrigerant 1. stage R452A (A1, H280) (1,8 kg) R452A (A1, H280) (1,8 kg) Refrigerant 2. stage R23 (A1, H280) (0,39 kg) R23 (A1, H280) (0,39 kg) Circulation Pump Pressure pump max. 40 lpm ; 0.9 bar | 10.57 gpm ; 13.05 psi 40 lpm ; 0.9 bar | 10.57 gpm ; 13.05 psi Pump connection M30x1,5 AG male M30x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Analogue input via optional Com.G@te via optional Com.G@te Analogue output via optional Com.G@te via optional Com.G@te Operating Data Old Sku 1014.0054.01 1014.0055.01 Permissible ambient temp. 5 to 40 °C 5 to 40 °C Noise Level 64 dB(A) 64 dB(A) Filling volume min. 3.8 Liters / 1 gal 3.8 Liters / 1 gal Volume of expansion 3.3 Liters / 0.87 gal 3.3 Liters / 0.87 gal Power supply 208V 3~ 60Hz 460V 3~ 60Hz Current max 21,5 A 11 A

    $57,250.00 - $65,200.00

  • So-Low -85°C Ultra-Low Upright Freezer - 18 Cubic Ft.

    So-Low -85°C Ultra-Low Upright Freezer - 18 Cubic Ft.

    So-Low -85°C Ultra-Low Upright Freezer - 18 Cubic Ft. Please note: This Product may carry up to an 8 week lead time!    So-Low Ultra-Low Upright Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low U85-18 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch.   Product Specifications Temperature Control Digital control with two temperatures displays. one display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Dimensions: Exterior: 40"" x 36" x 79.5" Interior: 23" x 26" x 51.25" Capacity 18 Cubic Ft. / 505 Liters Temperature Range -40°C to -85°C / -40°F to -121°F Shelving 4 Adjustable Shelves (5 Compartments) Inventory Rack Capacity 20 Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval   Specification Data Sheet   Diagram Data Sheet

    $10,200.00

  • So-Low -80°C Ultra-Low Chest Freezer - 21 Cubic Ft.

    So-Low -80°C Ultra-Low Chest Freezer - 21 Cubic Ft.

    So-Low -80°C Ultra-Low Chest Freezer - 21 Cubic Ft. Please note: This Product may carry up to an 8 week lead time!  So-Low Ultra-Low Chest Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low C80-21 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch     Product Specifications Temperature Control Digital Control with two temperature displays. One display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Dimensions: Exterior: 91" x 36" x 49" Interior: 81" x 21.5" x 21" Capacity 21 Cubic ft. / 594 Liters Temperature Range -40°C to -80°C / -40°F to -112°F Shelving N/A Inventory Rack Capacity 36 Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval   Specification Data Sheet   Diagram Data Sheet 

    $13,750.00

  • So-Low -85°C Ultra-Low Chest Freezer - 9 Cubic Ft.

    So-Low -85°C Ultra-Low Chest Freezer - 9 Cubic Ft.

    So-Low -85°C Ultra-Low Chest Freezer - 9 Cubic Ft. Please note: This Product may carry up to an 8 week lead time!    So-Low Ultra-Low Chest Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low C85-9 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch.   Product Specifications Temperature Control Digital Control with two temperature displays. One display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Dimensions: Exterior: 57.5" x 29" x 46.5" Interior: 46" x 16" x 20" Capacity 9 Cubic Ft. / 255 Liters Temperature Range -40°C to -85°C / -40°F to -121°F Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval   Specification Data Sheet   Diagram Data Sheet

    $8,300.00 - $8,800.00

  • 1.5 Gallon Tall Stainless Steel SIDEMOUNT - POT ONLY

    1.5 Gallon Tall Stainless Steel SIDEMOUNT - POT ONLY

    1.5 Gallon Tall Stainless Steel SIDEMOUNT - POT ONLY ***Note: 'with Hardware' Option only includes the side-mount manifold with gauge pre-installed. (Does Not Include Lid or Gasket) This is a replacement part for the following Vacuum Chambers: Glass Vac 1.5 Gallon Tall Stainless Steel Vacuum Chamber   Dimensions: 8-5/8"" Tall x 7-1/8"" Diameter Hole Size: 21/64 Material: 304 - 2B Stainless Steel

    $52.00 - $70.00

  • The Press Club 1.25" x 4" ROSIN BAGS

    The Press Club 1.25" x 4" ROSIN BAGS

    1.25" x 4" Rosin Bags  The Press Club brings science to the art of rosin pressing. The Press Club Prides themselves in making the toughest and strongest rosin bags on the market. After years of research and lab testing, their rosin bags are now made with our proprietary pink stitch and come with a ZERO BLOWOUT GUARANTEE™. If you ever get one, They will replace the bag. It's that simple. Available in 25, 37, 50, 75, 90, 120, 160 and 220 micron. 1.25” x 4” Inch 10-Pack Pre-Flipped Inside-Out 100% Food-Grade Nylon Solvent & Boil Resistant High Pressure Resistance (Over 20 Tons) High Heat Resistance (Up To 375° F) Reusable Over 5x (Simply Wash With Alcohol) Covered By The Press Club’s Zero Blowout Guarantee Satisfaction Guarantee & 365-Day Return Policy Made In USA General Micron Guideline: Dry Sift & Bubble (5, 10, 15, 25, 37, 50) | Flower (75, 90, 120, 160, 220)   

  • 36" Buchner Filtration Kit

    36" Buchner Filtration Kit

     Buchner Filtration Kit This filtration kit is operated by using a vacuum pump to pull the solution through the filter paper to remove particulate. The funnel has a 36" perforated plate to support the filter paper. The 150 liter collection vessel has multiple sight glass ports so that you can easily view inside the vessel as well as hold up a flashlight if needed. The standard lid includes a pressure gauge, KF-25 vacuum port, and a valve to release vacuum pressure or add positive pressure to the vessel. The vessel has a surrounding jacket that can be used to heat or cool the solution within the main vessel, it can even be outfitted with a mixer and recovery system if desired! To build your custom setup, talk to our experienced team of account representatives. This kit includes: 36" Filtration Funnel  150L Jacketed Reactor 1.5" Butyl hose Diaphragm vacuum pump (optional)

    $9,500.00

  • Caster Wheels for Reactors

    Caster Wheels for Reactors

    Heavy duty replacement wheels to be used on 50L, 150L, and 300L BVV Stainless Steel Reactors.

    $30.00

  • Sale -50% Micro-Cap Filters

    Micro-Cap Filters

    ErtelAlsop Micro-Cap Filters 1 Micron Grade M-503P Diatomaceous Earth Micro-Cap 1 Micron Grade MC-55CP Carbon Filled Micro-cap With single-use technology on the rise, our new ErtelAlsop MicroCap Laboratory Cabinet has been created to simplify filtration and separation trials for research and development, as well as, process development laboratories.  This attractive and well organized Cabinet easily stores the filters you require. The MicroCap™ suite of single-use capsules provide a uniquely flexible line of disposable depth filter products designed for optimizing and developing processes during scale-up and scale-down studies. The MicroCap 22 capsule enables quick and efficient determination of appropriate media grades in providing the best filtration performance as well as required filtration area to meet process volumes. Each MicroCap Laboratory Cabinet is supplied with forty-eight MicroCap 22 capsules in twelve different grades ranging from a nominal 15 micron to 0.2 micron.  All supplied capsules contain 22.5 cm2 (3.48 in2) of filtration area per capsule.  These easy to use capsules allow users to test a comprehensive range of depth filter media and efficiently determine the right solution for their process needs.   Applications MicroCap capsules are designed for small volume processing of: Primary separations/prefiltration Secondary clarification Cell culture harvest Cell culture clarification DNA removal Endotoxin reduction Host Cell Protien (HCP) reduction Protein aggregate removal Decolorization   Performance The MicroCap Laboratory Cabinet incorporates ErtelAlsop’s MicroCap capsules each containing our high performance XL Series, and select MicroMedia series grades of depth filter media to provide the optimum balance of dirt holding capacity and throughput. Containing a high performance grade of diatomaceous earth filter aid, coupled with a strong positive zeta potential, ErtelAlsop’s XL media capsules provide superior contaminant retention. The XL Series of depth filter media exhibits 2-5 times the throughput of competitive media while maintaining equivalent or better product clarity.   Reliability As with all ErtelAlsop depth filter products the MicroCap capsules provide performance consistency and lot to lot traceability all in an easy-to-use format. All MicroCap capsules are batch tested in order to meet all quality requirements and meet all applicable USP requirements including the Class VI Plastics.    Scalability The MicroCap series of single-use capsules contain six easily scalable sizes of capsules. Additionally each of these capsules readily scale to ErtelAlsop’s 12” and 16” diameter lenticular depth filter modules.  

    $10.00 - $15.00

  • Neocision Spectra Veg 500W LED Grow Light

    Neocision Spectra Veg 500W LED Grow Light

    Neocision Veg 500 LED Grow Light Neocision Veg 500 LED grow light fixtures are designed for commercial growers seeking enhanced yield and canopy coverage as compared to 600W metal halide or 630W ceramic metal halide lights. Increasing PPFD can help you accelerate growth for your mother plants before and after you take cuttings.  Features: Tested efficacy of 2.62 μmols/J at 240 VAC Industry Leading Horticulture LEDs RJ Port for Plug and Play Control Systems Folding Design for Fast and Easy Installation 5 Year Limited Warranty

    $228.00

  • Neocision Elite 750W LED Grow Light

    Neocision Elite 750W LED Grow Light

    Neocision Elite 750 LED Grow Light Neocision Elite 750 led grow light fixtures feature a 21% blue spectra and 44% red spectra with a peak at 660nm for your flowering plants. This unique spectra mix creates stronger plants for nutrient uptake with maximized red for increased photosynthesis. Ideal for hanging over benches. Features: PPE 2.88 Micromoles / J 2146 PPF per Fixture Industry Leading Horticulture LEDs RJ Port for Plug and Play Control Systems Folding Design for Fast and Easy Installation 7 Year Limited Warranty

    $452.00

  • Sale -29% 2 Lowtemp V2 Press Medusa System - PA1500 BVA Air Pump - NEW Open Box

    2 Lowtemp V2 Press Medusa System - PA1500 BVA Air Pump - NEW Open Box

    2 Lowtemp V2 Press Medusa System - PA1500 BVA Air Pump - Open Box Description The Medusa system from Lowtemp Industries gives the ability to link up to FIVE 4x7 Lowtemp Presses together for a single operator! Press an easy 500g of sift or 300g of flower per squish with five linked presses. Scale anywhere from 2-5 presses as your needs require! This system keeps the small batch quality that the Lowtemp V2 system is known for, but is perfect for scaling up production to almost any level.  Pump Options Explained P1000 Premium Hand Pump- Available up to 3 presses. This option is great for those looking for the delicate precision our hand pumps are known for while still having massive processing power.   PA1500 Air Pump- Available up to 4 presses. The air pump option is fantastic for people looking for automation. Since the PA1500 moves a lot of oil pretty quickly, we don't recommend using it for bubble flower pressing under 2-3 presses. However, when split across multiple presses, it's actually really great for bubble Flower pressing and becomes very easy to press Flower with. We recommend at least a 30 gallon air compressor with 110-175 psi. Bigger is better in regards to your air compressor in this case.    PE102 Electric Pump- Available up to 4 presses. The electric option is also automated, and pressure is applied with the flick of a switch. Again, we do not recommend using 1 or 2 presses on Flower or other concentrates since the flow rate is relatively high (quick pressure application), unless you have a lot of experience pressing. Using proper bagging techniques makes it entirely possible. No air compressor is needed, only a 110v plug! Super simple and very quiet.    Number of Presses Explained Manifolds come in 2 port, 4 port, and 5 port. Every port comes with a quick connect already attached, which makes the ability to disconnect and add more presses in the future as easy as threading a quick connect! Please keep in mind, due to high pressure fluid dynamics, multiple presses may not close at the exact same time, however they will not start to apply any considerable amount of force until all the presses have caught up to each other.  Individual Press Specs The last press you buy: Period. We designed this press with your space and portability constraints in mind. All the while, creating a system that will last you a lifetime. We kept the pressure options entirely open source so you can select the press style that works for you. For more budget friendly options, a simple $40 bottle jack can be used. If you want the best of the best, we carry High End BVA and SPX Hydraulics which come assembled, bled, and tested with pressure gauges installed.  Our unique modular design makes any possible electronic warranty work extremely cheap to ship for fulfilment. Our competitors make you ship an entire press in for a simple electronic component failure or loose wire which can cost you hundreds in shipping fees.  The Lowtemp V2 is the final solution to any large scale solventless lab. One operator can use up to 5 presses at once via a single pump. Specs Sturdy and Ultra Compact design. 10" tall, 10" long, 6" wide 58 lbs Complete Modular design Food Grade Anodized and insulated 4"x7" plates Powder coated steel Made in Denver, Colorado with Certified American alloys Lifetime Warranty on the press  1 year full warranty on the electronics Universal force options up to 20 tons Horizontal pressing capabilities

    $3,961.30$2,800.00

  • 4" Hybrid Wiped Film Evaporator (WFE) Distillation Turn Key System - USA MADE

    4" Hybrid Wiped Film Evaporator (WFE) Distillation Turn Key System - USA MADE

    4" Hybrid Wiped Film Evaporator The BVV™ 4" Wiped Film Evaporator (WFE) is a full turnkey distillation kit that will allow anyone to run a molecular distillation. With the magnetically driven wiper and high vacuum seals this system is able to achieve vacuum levels below 10 mtorr. The system has multiple temperature control apparatuses that allow the user to dial in specific settings that works best for their application. The maximum operating temperature of the outer jacket is 200°C with the standard circulators shown below. The maximum feed rate is up to 7LPH. On average, you can expect to flow 500-1000ml per hour. All heated circulators can be tailored to your specific needs, just ask our team of experienced account representatives!  The temperature controlled circulators will need thermal fluid that corresponds with the temperatures needed. Click here to browse fluids.  *Heating and Chilling Fluids are not included* Duratherm S - 7 Gallons - Bottom heater (wiper body) Therminol XP Heat Transfer Fluid - 5 Gallons -  Top and middle heater *Propylene Glycol - 5 Gallons - Fluid for the diffusion pump option chiller.  Ethanol 99% or Isopropyl 99% - 2 Gallons - Cold Trap / Cold Finger.    This listing picture reflects the upgraded vacuum/ outlet systems. For a full list of ancillary equipment included in each kit please see the table below: KIT Part of System Component Electrical Requirements (V / Ph / A) WFE04HYB-TK-01 -Standard Model Wiper Assembly BVV™ Stirring motor 120V / 1Φ Vacuum System BVV™ Pro Series 35.3CFM Rotary Vane Vacuum PumpDigiVac Bullseye Precision Vacuum Gauge 220V / 1ΦAA    Batteries (4x) Temperature Controlled Circulators BVV 5 Liter BVV 19 Liter (2x) 120V / 1Φ / 8.3A 220V / 1Φ / 18.1A Injection Beaker and Wrench 7LPH PeristalticHeated Hose 120V / 1Φ120V / 1Φ WFE04HYB-TK-02   -Upgraded Vacuum System -Upgraded Cold Trap Wiper Assembly BVV™ Stirring motor 120V / 1Φ Vacuum System BVV™ Pro Series 35.3CFM Rotary Vane Vacuum PumpULVAC Diffusion Pump (ULK-04A)*DigiVac Bullseye Precision Vacuum Gauge 220V / 1Φ 180-264V / 1Φ / 10.5 AAA Batteries (4x) Temperature Controlled Circulators BVV 5 Liter BVV 19 Liter (2x) 120V / 1Φ / 8.3A 220V / 1Φ / 18.1A Injection Beaker and Wrench 7LPH PeristalticHeated Hose 120V / 1Φ 120V / 1Φ Cold Trap Polyscience IP100 120V / 1Φ / 11.5A WFE04HYB-TK-03   -Upgraded Vacuum System -Upgraded Cold Trap -Outlet Pumps Wiper Assembly BVV™ Stirring motor 120V / 1Φ Temperature Controlled Circulators BVV 5 Liter   BVV 19 Liter (2x) 120V / 1Φ / 8.3A 220V / 1Φ / 18.1A Injection Beaker and Wrench 7LPH PeristalticHeated Hose 120V / 1Φ 120V / 1Φ Cold Trap Polyscience IP100 120V / 1Φ / 11.5A Outlet Pumps Beaker and Wrench Gear Pump (2x)Beaker and Wrench Heat Pad PID Controller 120V / 1Φ 120V / 1Φ Notes: *The ULVAC diffusion pump must be water cooled, if facility water cooling is not an option an additional chiller may be needed, a Polyscience 1HP Durachill is recommended as a recirculating option. Filtered well water is typically sufficient as a cooling method if available.

    $36,500.00 - $60,500.00

  • Truffly Made - Automatic Candy Demolder

    Truffly Made - Automatic Candy Demolder

    Automatic Candy Demolder Fully Electric! Plug & Play Anywhere – No Compressed Air Required The Automatic Candy Demolder is designed to remove a full sheet of candies from molds in one “pop”. Unmold your trays in second! Ideal for Hard Candy, Gummies, Caramels, Chocolate, Caramel, Taffy and more! The automatic mold “Popper” includes one standard mold frame to match the Truffly Made mold you are using. Please note that molds are not included. Custom mold plates are available for additional 1,699 USD to work with your silicone molds* Unmolding Rate: 15,000+ pieces per hour Adjustable Speed Dimensions:  27.16” W x 38.58” L x 27.56” H *The Automatic Candy Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities. Maximum cavities per mold = 80 Maximum Mold size = 11.5 x 15” Please contact info@trufflymade.com for a custom quote LARGE PIN FITTINGS AVAILABLE HERE ☜ Please select the type of mold you are using from the list, All Truffly Made molds listed are compatible with the demolder. For any silicone mold not listed, or is from a different manufacturer, please contact us before placing an order to verify compatibility. The Truffly Made Automatic Demolder. Easy to use, just one press to pop out a full mold sheet of candies within seconds!. Works best if the candies are cooled off and hardened. Select the mold frame that matches the mold you are using. Place the mold frame in to the Demolder. Add your filled mold on top of frame. Slide the frame in the Demolder Press the pedal. DONE! All your candies are unmolded. PLEASE NOTE THAT THE UNMOLDING EFFICIENCY IS VARIABLE DEPENDING ON PRODUCT STICKINESS. . WE RECOMMAND TO UNMOLD WITHIN 3 HOURS AFTER DEPOSITNG FOR BETTER EFFICIENCY. . SILICONE MOLDS CAN BE PRE-COATED USING MCT OIL , MINERAL OIL OR COOKING SPRAY TO INCREASE UNMOLDING EFFICIENCY. . Specifications: Height: 700mm / 27.56” Width: 690mm / 27.16” Length: 980mm / 38.58” Weight: approx. 32 kg / 70 lbs with pusher and frame Material: Stainless Steel / Aluminum Power input: 100-240V AC / 50-60Hz Power Output: 24V DC / max.320W Electric motor: 7 amps, force: 10Nm, speed infinitely adjustable up to 70rpm; Change of direction of rotation Treble-bass adjustment; Penetration depth setting: 15mm Foot or Hand Pedal Activated Made in Germany  

    $10,468.00 - $12,167.00


You have seen 624 out of 740 products

Closed Loop Extractors, Vacuum Ovens, Solvent Recovery Equipment

We make it easy to achieve peak performance and purity with our selection of botanical extraction equipment. All of our closed loop extractors are engineered for efficiency and reliability, ideal for professionals seeking high-yield, solvent-based extraction systems. Pair your extractor with our high-performance vacuum ovens, designed to gently remove residual solvents while preserving the integrity of your final product.

We also carry useful equipment like purification and solvent recovery systems that allows you to refine your product while reclaiming and reusing solvents efficiently, saving you time and resources during the extraction process. Whether you're operating a small-scale lab or a full production facility, BVV has the advanced tools and supplies you need for successful botanical processing.

Login

Forgot your password?

Don't have an account yet?
Create account