New Products
-
M16x1 F X 1/2" NPT Stainless Steel Adapter (2 pack)
M16x1 F X 1/2" NPT Stainless Steel Adapter (2 pack) This adapter will fit on 16mm x 1mm threads found on many heater and chillers made by Julabo or Huber and adapt these threads to 1/2" NPT
$125.00
-
Lidocaine Hydrochloride Powder USP/DMF Grade
Lidocaine ≥99.0% Complies with USP Testing Specifications Lidocaine Hydrochloride is a professional grade, white crystalline powder intended exclusively for professional, nonclinical laboratory research, chemical analysis, and testing. This product is not marketed, labeled or intended for medical treatment, veterinary applications, pharmaceutical compounding, or administration to humans or animals. It is not intended for incorporation into cosmetics, food, beverages, or dietary supplements, or for personal or household use. Specifications: Assay: 97.5% – 102.5% Melting Range: 66°C – 69°C Water Content (H₂O): 5.0% – 7.0% Residue After Ignition: ≤ 0.1% Sulfate (SO₄): Passes Test Heavy Metals: ≤ 0.002% Storage: Store in a cool, dry place, protected from light and moisture. ** It is the responsibility of the purchaser to ensure that any product they buy complies with their local, state, and national regulations. Chemical Formula: C14H23CIN2O Molecular Weight: 270.80 g/mol CAS Registry Number: 6108-05-0 Appearance White Crystalline Powder Odor: Characteristic Density 0.984 g/mL at 25 °C Boiling Point: 159-160 °C at 2 mmHg Solubility in water: Highly Soluble GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H301, H302 H315, H319, H334, H335, H412 GHS Precautionary Statements P233, P260, P261, P264, P264+P265, P270, P271, P273, P280, P284, P301+P317, P302+P352, P304+P340, P305+P351+P338, P319, P321, P330, P332+P317, P337+P317, P342+P316, P362+P364, P403, P403+P233, P405, P501 UN Identification Number: None Proper Shipping Name: None Transport Hazard Class: None Packing Group: None DOT Placard: None
$24.00 - $720.00
-
Benzocaine Powder 99%
Benzocaine 99% Complies with USP Testing Specifications Our high purity benzocaine is greater than ≥99% purity. It standard testing is meets USP DMF grade It's widely used across various industries, including pharmaceuticals, cosmetics, and research. * USP DMF GRADE : refers to materials, specifically raw materials and active pharmaceutical ingredients (APIs), that meet the quality standards established by the United States Pharmacopeia (USP) and are used in the production of pharmaceutical products. ** It is the responsibility of the purchaser to ensure that any product they buy complies with their local, state, and national regulations. Applications: Pharmaceuticals: Core ingredient in formulating topical anesthetics and pain relief solutions. Cosmetic Manufacturing: Used in skin-soothing and numbing products. Research & Development: Suitable for experimental formulations and chemical studies. Handling and Storage: Store in a cool, dry place away from direct sunlight. Ensure the container is tightly sealed after use. Important Notice: This product is intended for industrial and professional use only. Misuse or unauthorized handling may result in legal or health consequences. Chemical Formula: C9H11NO2 Molecular Weight: 165.19 g/mol CAS Registry Number: 94-09-7 Appearance White Crystalline Powder Odor: Odorless Density 1.17 g/cm3 Boiling Point: 591.3°F (310.7°C) Solubility in water: Slightly Soluble GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H317, H370, H411 GHS Precautionary Statements P260, P261,P264, P270, P272, P273, P280, P302+P352, P308+P316, P333+P317, P362+P364, P391, P405, P501 UN Identification Number: None Proper Shipping Name: None Transport Hazard Class: None Packing Group: None DOT Placard: None
$26.00 - $700.00
-
Oxone PS-16 Monopersulfate (Non-Chlorine Shock)
OxoneTM PS-16 Monopersulfate | Non-Chlorine Shock Oxone PS-16 Compound is used as an active ingredient in disinfectant formulations (not registered as a biocide in USA), and as an oxidizing agent in other formulations, such as pool & spa non-chlorine shock oxidizers, denture cleansers and laundry bleaches. The grade is also used as a wet strength resin paper repulping aid, metal surface treatment agent, selective oxidizer in chemical synthesis, wool shrink-proofing treatment, waste water treatment and odor control agent. Applications: Water Treatment: It can be used to treat water, including drinking water and pool & spa water, due to its ability to kill bacteria and neutralize contaminants. Cleaning and Sanitization: It's used in various industrial cleaning products, especially for disinfecting surfaces or purifying air and water. Oxidation Reactions: In chemical processes, Oxone PS-16 can be used as a strong oxidizing agent to break down pollutants or aid in chemical synthesis. Active Ingredients: Potassium Peroxymonosulfate (KHSO₅) - 45% Other Ingredients - 55% Total -100% Bag Dimensions: 21"x14"x4" (55.1lbs) Chemical Formula: KHSO₅·KHSO₄·K₂SO₄ Molecular Weight: 614.8 g/mol CAS Registry Number: 70693-62-8, 7646-93-7, 7727-21-1 Appearance White Granules Odor: Odorless Density 2.35 g/cm3 (68 °F / 20 °C) Boiling Point: None Solubility in water: Highly and Readily Soluble at 297–357 g/L at 22°C (72°F) GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H302, H314 GHS Precautionary Statements P260, P264, P270, P280, P301 + P312 + P330, P301 + P330 + P331, P303 + P361 + P353, P304 + P340 + P310, P305 + P351 + P338 + P310, P363, P405, P501 UN Identification Number: 3260 Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. (Monopersulfate Compound) Transport Hazard Class: 8 Packing Group: II DOT Placard:
$8.00 - $11,040.00
-
CO2 Tank Filled, 600g E290 Food Grade
CO2 Tank 600g Food Grade E290 - Liquid CO2 Filled Made in Italy Our CO2 tank arrives filled with 600g of compressed liquid CO2. The gas can be removed using our regulator or valve dispenser that attaches to the top of the tank. Tank Thread: M11 x 1.0 Regulator Thread: M11 x 1.0 (Connects to tank) Regulator Output: 1/4" Brass Barb Valve Dispenser Output: 1/4" Brass Barb Valve Dispenser Thread: M11 x 1.0 (Connects to tank) *Tank is non-refillable *At end of use, completely empty the tank for recycling. *Note CO2 Tank Pressure is 855PSI Tank Volume of Helium Product Sku: 600g / 326.8 Liters / 86.3 Gallons CO2-600G Regulator/Dispenser Details (not included with tank only purchase) Regulator - Adjustable via. needle valve, regulated to 80 PSI. Made in Italy. Thread: M11x1 (tank connection). Output: 1/4" Barb to connect to any hose with a 1/4" I.D. (inside diameter) Gauges read in BAR. M11 Valve Dispenser Kit - Includes adjustable pushpin style valve dispenser. Output: 1/4" Brass Barb, NO GAUGES Chemical Formula: CO2 Molecular Weight: 44.009 g/mol CAS Registry Number: 124-38-9 Appearance Colorless Odor: Odorless Density 0.114 lb/ft3 (178.6 g/m3) Boiling Point: N/A Solubility in water: Completely Soluble GHS Pictograms: GHS Signal Word: Warning GHS Hazard Statements: H280, H281 GHS Precautionary Statements P282, P336+P317, P403, and P410+P403 UN Identification Number: 1013 Proper Shipping Name: Carbon Dioxide Transport Hazard Class: 2.2 Packing Group: None DOT Placard:
$26.00 - $105.00
-
Acetonitrile High Purity
Acetonitrile (CH₃CN) is a colorless, volatile, and flammable liquid organic compound with a distinctive, slightly sweet odor. It is the simplest aliphatic nitrile and is commonly used as a solvent in laboratories and industries due to its ability to dissolve a wide range of polar and nonpolar substances. Acetonitrile is highly polar, miscible with water and many organic solvents, and is often used in the production of pharmaceuticals, plastics, and adhesives. Additionally, it plays a key role in the extraction and purification of various compounds, especially in high-performance liquid chromatography (HPLC). Acetonitrile is widely used in various industrial, laboratory, and scientific applications. Some of the key applications of acetonitrile include: Solvent in Organic Synthesis: Acetonitrile is often used as a solvent in organic synthesis due to its ability to dissolve a wide range of both polar and nonpolar substances. It's commonly employed in reactions involving electrophilic substitution, nucleophilic substitution, and polymerization. High-Performance Liquid Chromatography (HPLC): Acetonitrile is a common solvent in HPLC, where it's used in mobile phases for separating and analyzing compounds, particularly in the pharmaceutical and environmental industries. Pharmaceutical Industry: Acetonitrile is used in the production of various pharmaceuticals, particularly in the synthesis of intermediates and active pharmaceutical ingredients (APIs). It helps to purify and isolate compounds in medical formulations. Extraction and Purification: Acetonitrile is used in liquid-liquid extraction to separate or purify chemicals, such as when isolating nucleic acids or proteins, and in the extraction of rare earth metals. Chemical Manufacturing: It is involved in the production of acetic acid, adiponitrile (for nylon production), and various other chemicals, such as dyes, resins, and plastics. Electrochemical Applications: Acetonitrile is used in electrochemical processes due to its high polarity and low viscosity, making it suitable for applications like electroplating and electrochemical cell research. Cleaning and Degreasing: In some industrial applications, acetonitrile serves as a cleaning agent, helping to remove grease, oils, and other contaminants from machinery and equipment. Gas Chromatography (GC): It can be used as a solvent in GC to help in the analysis and separation of volatile organic compounds. Chemical Formula: C2H3N + CH3CN Molecular Weight: 41.05 g/mol CAS Registry Number: 75-05-8 Appearance Colorless Liquid Odor: Sweet, ethereal Density 0.787 at 68 °F (less dense than water) Boiling Point: 82°C /179 °F Solubility in water: 800 g/L at 25 °C GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H225, H302, H312, H332, H319 GHS Precautionary Statements P210, P233, P240, P241, P243, P261, P264, P270, P271, P280, P301, P212, P330, P303, P361, P353, P304, P340, P312, P305, P351, P338, P337, P313, P363, P370,P378, P403, P235, P501 UN Identification Number: 1648 Proper Shipping Name: Acetonitrile Transport Hazard Class: 3 Packing Group: II DOT Placard:
$32.00 - $2,350.00
-
Deionized Water (DI) - Ultrapure Water - Type 1
Deionized Water Ultrapure Water - Type 1 Deionized Water Type 1, also known as ultrapure water, is water that has been processed through ion-exchange methods to remove nearly all of its dissolved ions, such as minerals, salts, and other charged particles. This ultra-purification process results in water with a very low level of conductivity, making it ideal for high-precision applications in laboratories, pharmaceuticals, electronics manufacturing, and scientific research. As defined by the ASTM there are only 4 types of Pure Water. Type 1 being the most pure. Type 1 deionized water is the highest grade of deionized water, ensuring a high level of purity, typically with resistivity values of 18.2 MΩ·cm at 25°C. It is free from contaminants like bacteria, organic material, and particulate matter, making it suitable for critical tasks like reagent preparation, tissue culture, analytical procedures, and cleaning of sensitive equipment. Due to its lack of ions and impurities, Deionized Water Type 1 is non-reactive, ensuring it does not interfere with experiments or sensitive processes, which is essential in fields requiring the highest level of water purity. *Packaged in FDA Compliant HDPE Bottles. Each order is poured directly from the factory drum ensuring you get the freshest stock upon delivery.
$22.00 - $290.00
-
50% Vinegar Technical Grade
Technical Grade Vinegar 50% Made in USA - Industrial Strength *The strength of this vinegar requires Hazmat Shipping Fees* The acidic nature of nontoxic vinegar is so powerful it dissolves mineral deposits, dirt, grease, grime from glass, tile, laminate, and stainless-steel surfaces. It deodorizes, and degreases surfaces in kitchens, laundry rooms, and bathrooms. This lab grade product delivers greater cleaning and descaling performance for industrial applications. Higher concentrations of acetic acid (Vinegar) like this can impair the cell membrane of bacteria and fungi, making this a great choice for disinfection. ***Recommended dilution varies by application. Chemical Formula: CH3COOH Molecular Weight: 60.05 g/mol CAS Registry Number: 64-19-7 Appearance Colorless Odor: Vinegar Density 1.061 - 1.075 g/cm3 Boiling Point: 100 °C (212 °F) Solubility in water: Completely Soluble GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H314 GHS Precautionary Statements P210, P233, P240, P241, P242, P243, P260, P264, P280, P301+P330+P331, P302+P361+P354, P303+P361+P353, P304+P340, P305+P354+P338, P316, P321, P363, P370+P378, P403+P235, P405, and P501 UN Identification Number: 2970 Proper Shipping Name: Acetic Acid Solution Transport Hazard Class: 8 Packing Group: II DOT Placard:
$18.00 - $3,250.00
-
Xylene Technical Grade
Xylene Xylene is a versatile, colorless liquid with a sweet odor, commonly used as a high-performance solvent in various industrial applications. It is a mixture of three isomers—ortho-xylene, meta-xylene, and para-xylene—and is widely recognized for its ability to dissolve oils, resins, and other complex substances. Xylene is commonly used in industries such as coatings, paints, printing, and adhesives, due to its excellent solvency power and ability to improve the quality and consistency of products. Xylene is a vital component in industrial and laboratory settings, ensuring smooth operations and efficient production. While it offers excellent performance in various applications, it should be handled with care due to its flammable nature and potential health risks when inhaled or ingested. Key Features: High solvency power Ideal for use in paints, coatings, adhesives, and varnishes Effective cleaning and degreasing agent Key ingredient in chemical manufacturing Suitable for industrial and laboratory applications Applications: Paints and coatings Printing inks Chemical manufacturing Adhesives and sealants Industrial cleaning Laboratory use Note: Xylene should be stored in a cool, well-ventilated area away from open flames, and proper safety precautions should be followed during use. Chemical Formula: (CH3)2C6H4 Molecular Weight: 106.17 CAS Registry Number: 106-42-3 Appearance Transparent Colorless Odor: Sweet Pungent Aromatic Hydrocarbon Density 7 .25 lbs/gal0.87 g/ml Boiling Point: 276.04 °F (135.58 °C) Solubility in water: Not Soluble GHS Pictograms: GHS Signal Word: Warning GHS Hazard Statements: H226, H312, H315, H332 GHS Precautionary Statements P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P302+P352, P303+P361+P353, P304+P340, P317, P321, P332+P317, P362+P364, P370+P378, P403+P235, and P501 UN Identification Number: 1307 Proper Shipping Name: Xylenes Transport Hazard Class: 3 Packing Group: III DOT Placard:
$22.00 - $700.00
-
16.75" X 6" Screen (No Housing)
AVS-16.75" X 6" Screen Description Please note that this screen is for use with Automtic Vibrating Sifter - Industrial 16.25 x 6" Machines ONLY. It is not compatible with the Automatic Vibrating Sifter - Commercial 15.50 x 4". (Compare to Custom Cones) Specifications: COMPATIBLE WITH: Automtic Vibrating Sifter - Industrial 16.25 x 6" (This is not compatible with the Automatic Vibrating Sifter - Commercial 15.50 x 4".) SCREEN DIAMETER: 16.75 Inches SCREEN DEPTH: 6 Inches HOLE SHAPE: Square
$80.00
-
Industrial Vibrating Sifter - 16.25 x 6"
Automatic Vibrating Sifter - Industrial 16.25 x 6" This item Ships Freight - 88 lbs. Sifting your plant material is a great way to remove stems automatically, and if you are producing a premium pre-roll product, it is always best to sift out any stems! Our Large Automatic Vibrating Sifter was explicitly designed with plant processors in mind - the stainless steel construction and screens ensure you can easily clean our sifter, and the screen sizes are fine-tuned for the most common sifting needs. Once you've ground your plant material, you only need to pour your flower into the sifter and switch it on. You can now walk away and wait for your flower to be automatically sifted - no more standing around doing manual sifting. Sifting your plant material will not only ensure no stems make it into your pre-rolls but will also ensure nothing else makes it into your pre-rolls, like large leaves, gravel, or any other foreign matter. The consistent grind will make your pre-rolls burn more evenly and pack more evenly in any cone-filling machine. (Compare to Custom Cones) Package Dimensions - 19"x21"x35"
$1,500.00
-
15.50" X 4" Screen With Housing
AVS-15.50" X 4" Screen With Housing Description Please note that this screen is for use with Commercial and industrial Sifting Machines ONLY. It is not compatible with the Automatic Vibrating Sifter - Mini 11.75 x 4". (Compare to Custom Cones) Specifications: COMPATIBLE WITH: Automatic Vibrating Sifter - Commercial 15.50 x 4" (This is not compatible with the Automatic Vibrating Sifter - Mini 11.75 x 4".) SCREEN DIAMETER: 15.50 Inches SCREEN DEPTH: 4 Inches HOLE SHAPE: Square
$80.00
-
Commercial Vibrating Sifter - 15.50 x 4"
Automatic Vibrating Sifter - Commercial 15.50 x 4" Sifting your plant material is an excellent way to remove stems automatically. This commercial sifting machine was explicitly designed with processors in mind - the stainless steel construction and screens ensure you can easily clean our sifter, and the screen sizes are fine-tuned for the most common sifting needs. The commercial grade sifter offers a larger diameter, coming in at 15.50 inches, compared to the 11.75 inches of the original starter sifter - this means you'll be able to sift more plants in one sitting! Once you've ground your plant material, you only need to pour it into the sifter and switch it on. You can now walk away and wait for your plants to be automatically sifted - no more standing around doing manual sifting. Sifting your biomass will not only ensure no stems make it into your final product but will also ensure nothing else makes it into your product, like large leaves, gravel, or any other foreign matter. Additionally, consistent grinding will make your product burn more evenly and pack more evenly in any cone-filling machine. (Compare to Custom Cones) Plant Material Specific Sifter The commercial sifter was explicitly designed for plant material processors. From its stainless steel construction to multiple screen sizes, our team of Experts is confident this sifter or our other larger sizes will be the perfect addition to your product production process. We offer multiple screen sizes, allowing you to customize the particle size for the plant material in your product. Depending on the strain or weight of the product you are making, you may want to experiment with various screen sizes. Multiple Screen Sizes When it comes to sifting your plant material, you will want to have an ideal particle size for your plant material in mind. If you are still determining what size screen you need, our team of Experts is here to help! Depending on your strain and grinder, your ground biomass will have a different consistency. Additionally, depending on the size of the cone you are using and your desired fill weight, the particle size of your plant material will play a significant role. For example, a smaller particle size will allow you to pack more plant material into a small cone, but a particle size that is too small may lead to a poor, uneven burn. Specifications PURPOSE: Sifting Ground plant materialCONSTRUCTION: Stainless SteelSCREEN DIAMETER: 15.50 inchesMACHINE TYPE: SifterPOWER REQUIREMENT: 120vRATED VOLTAGE: 110VRATED FREQUENCY: 60HzRATED POWER: 50W
$850.00
-
11.75" X 4" Screen With Housing
AVS-11.75X4 Screen With Housing Description Please note that this screen is for use with the Automatic Vibrating Sifter - Mini 11.75 x 4" ONLY. It is not compatible with the larger Commercial and industrial Sifting Machines. (Compare to Custom Cones) Specifications COMPATIBLE WITH:: Automatic Vibrating Sifter - Mini 11.75 x 4"(Not compatible with larger sifters) SCREEN DIAMETER: 11.75 Inches SCREEN DEPTH: 4 Inches HOLE SHAPE: Square
$50.00
-
Mini Vibrating Sifter - 11.75 x 4" (Compare to Custom Cones)
Automatic Vibrating Sifter - Mini 11.75 x 4" Sifting your plant material is a great way to remove stems automatically, and if you are producing a premium product, it is always best to sift out any stems! Our Automatic Vibrating Sifter- Mini 11.75 x 4" was explicitly designed with plant material processors in mind - the stainless steel construction and screens ensure you can easily clean our sifter and the screen sizes are fine tuned for the most common sifting needs. Once you've ground your plant material, you only need to pour it into the sifter and switch it on. You can now walk away and wait for your plant material to be automatically sifted - no more standing around doing manual sifting. Sifting your plant material properly will not only ensure no stems make it into your product but will also ensure nothing else makes it into your products, like large leaves, gravel, or any other foreign matter. The Consistent grind will make your products burn more evenly and pack more evenly in any cone-filling machine. (Compare to Custom Cones) Plant Material Specific Sifter Our Automatic Vibrating Sifter- Mini 11.75 x 4" was explicitly designed for plant material processors. From its stainless steel construction to multiple screen sizes, our team of Experts is confident this sifter or our other larger sizes will be the perfect addition to your product production process. We offer multiple screen sizes, allowing you to customize the particle size for the plant material in your product. Depending on the strain or weight of the product you are making, you may want to experiment with various screen sizes. Multiple Screen Sizes When it comes to sifting your plant material, you will want to have an ideal particle size for your plant material in mind. If you are still determining what size screen you need, our team of Experts is here to help! Depending on your strain and grinder, your ground plant material will have a different consistency. Additionally, depending on the size of the cone you are using and your desired fill weight, the particle size of your plant material will play a significant role. For example, a smaller particle size will allow you to pack more plant material into a small cone, but a particle size that is too small may lead to a poor, uneven burn.
$550.00
-
CNC Packaging CNC Packaging C- Solo Cartridge Filling Machine
C- Solo Cartridge Filling Machine C-SOLO KEY FEATURES: Hands Free Foot Pedal Operation Fills up to 2200 units per hour Fills pods, disposables, carts, and luer lock syringes Internally Integrated Heating System Fill Volume from 0.1mL to 1.1mL *available in 3ml upon request* Low Maintenance Design Designed and Manufactured in the USA C-SOLO SPECIFICATIONS: 0.1-1.1mL Filling Volume OR 0.3-3.1mL Filling Volume Filling Accuracy +/- 0.02mL 500mL Capacity 2 zone PID Temperature Control Vessel Temperature from 10° to 75° C Syringe Temperature from 10° to 90° C 0-30psi System Purge Up to 750 psi Injection Pressure REQUIREMENTS: 120vAC 3A Single Phase Filtered, Dry and Oil Free Compressed Air, 80psi 20x20x24” Table Area (LxWxH) Plus Foot pedal
$10,500.00
-
50% Hydrogen Peroxide Food Grade H2O2
50% Food Grade Hydrogen Peroxide Our Food-grade 50% peroxide tests at ~50.4%. This the strongest peroxide we offer, next to our 35% Food Grade Peroxide, Our Food Grade 50% hydrogen peroxide is formulated with a special stabilizer package (organophosphonate) that replaces transition metals stabilizers typically found in hydrogen peroxide solutions. Our Peroxide is NSF® Certified. NSF-certified means a product was independently verified for safety, sanitation, and quality by NSF. NSF certification is recognized by health departments, government agencies, and industry associations. *Certified under ANSI/NSF Standard 60 Drinking Water Additives-Health Effects. Dosage levels shall be in accordance with NSF requirements. 55 Gallon Drum weights 548lbs, 270 Gallon Tote weighs 2500lbs. hydrogen peroxide usually loses less than 1% of its initial concentration in one year (0.5% for a 50% solution). Chemical Formula: H2O2 Molecular Weight: 34.015 g/mol CAS Registry Number: 7722-84-1 Appearance Colorless Liquid Odor: None Density 1.196 g/cm3 @ 20 °C (68 °F) Boiling Point: 114 °C (237 °F) Solubility in water: Completely Soluble GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H272, H302 + H332, H314, H335 GHS Precautionary Statements P210, P220, P260, P261, P264, P270, P271, P280, P283, P301+P317, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P306+P360, P316, P317, P321, P330, P363, P370+P378, P371+P380+P375, P405, P420, and P501 UN Identification Number: 2014 Proper Shipping Name: 50% Hydrogen Peroxide, Aqueous Solution Transport Hazard Class: 5.1, 8 Packing Group: II DOT Placard:
$35.00 - $800.00
-
4" Industrial Plant Material Grinder (Compare to Custom Cones)
BVV 4" Industrial Plant Material Grinder The 4" grinder from BVV will grind your dried plant material into a consistent, manageable size. The grinder is easy to use and can power through over 1.5 lbs per minute or as fast as you can feed it! It can grind dense flower or leafy trim , as long as it is pre dried. This machine will help you keep the trichomes and terpenes in the plant where they should be due to the low operating temperature, in comparison to a common blender or food processor. This Grinder is made of food grade aluminum and stainless steel, and can be broken down for cleaning in a matter of seconds. Very few tools are needed to assemble and operate so you can keep your focus on moving material through this step in your production line. Included with the grinder are two stainless steel screens; 3.8mm small 6mm large Specifications Model Number G400 Voltage 115V / 60Hz Wattage 850w External Dimensions 16" x 9" x 20" Weight 42lbs
$2,150.00
-
NPT Stainless Steel Thermowell
NPT Stainless Steel Thermowell These stainless steel thermowells are the perfect addition to an extraction system allowing the user to probe the internal temperate of a system component to know what temperature it is at. This thermowell feature 304 stainless steel and is 2.5" to 6" long with a 1/4" - 1/2" Male NPT threaded connect and a 1/4"-1/2" female NPT threaded connection on the top of the hex head.
$45.00 - $48.00
-
SHEL LAB SHEL LAB SVAC9-2 Vacuum Oven 9.3CF
SHEL LAB SVAC9-2 Vacuum Oven 264L, 230V The SHEL LAB Model SVAC9-2 is one of the largest vacuum ovens on the market, with 9.3 cubic feet of capacity. This unit also features a fully programmable Watlow PM9 Plus controller and a cool touch surface. A digital vacuum gauge shows chamber vacuum level in measurements of Torr and m/Torr. The display range is 760 Torr down to 0 mTorr (Maximum permitted end vacuum is 10 mTorr. Leak rate is 30 mTorr in 30 min). A secondary independent high limit controller provides overtemperature safety protection. This unit includes true vacuum valves and has cross-flow ventilation within the oven chamber to enhance total performance. The vacuum oven is secured to a ruggedly constructed mobile stand to create a vacuum pump at the base. Although the oven is not supplied with a vacuum pump, all vacuum plumbing and KF25 connections are provided. The SHEL LAB SVAC9-2 vacuum oven is equipped with a Viton gasket, which provides an excellent combination of high-temperature performance and chemical resistance. When paired with this oven’s deep-draw capacity and large chamber volume, the SVAC9-2 serves as one of the most robust vacuum work stations available on the market. Features include: Watlow PM9 Plus Controller Capable Of 40 Step Ramp And Soak Profiles, Or 4 Files With 10 Steps Per File Stainless Steel Interior Stainless Steel Exterior Option Available (Ideal For Cleanroom Applications) KF25 Fitting Included Built in Vacuum Pump Mount 24 Month Limited Warranty Temperature Range Ambient +15°C to 220°C Temperature Uniformity ± 6% of Set Point Temperature Stability ± 0.2°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 80 Minutes 150°C: 130 Minutes 220°C: 180 Minutes Operational Vacuum Range 3.0 to 29.9 inHg (101.6 to 1,012.5 mbar) Vacuum Gauge Range 0.0 to 29.9 inHg (0.0 to 1,012.5 mbar) Volume 264.0L (9.30 cu. ft.) Shelves 3 Max. Shelf Capacity 8 Max. Shelf Load 75.0 lb. (34.0 kg) Interior Dimensions (W x D x H) 28.0 x 24.0 x 24.0 in. (71.0 x 60.9 x 60.9 cm) Exterior Dimensions (W x D x H) 38.1 x 46.8 x 63.9 in. (96.5 x 118.9 x 162.4 cm) Weight 492.0 lb. (223.0 kg) Electrical Requirements 230V AC, 50/60Hz, 20.0A
$24,535.00 $19,950.00
-
SHEL LAB SHEL LAB SVAC4 Vacuum Oven 4.5CF
SHEL LAB SVAC4 Vacuum Oven 127.4L Our revamped SHEL LAB SVAC vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. Vacuum ovens prevent residue accumulation on products and use lower temperatures than typical convection ovens. Your products are processed with minimal impact and maximum throughput. SHEL LAB vacuum ovens have stainless steel interiors and provide exceptional durability and stability. Available in 4 sizes, SVAC Vacuum Ovens support a diverse array of applications. To achieve required vacuum levels, users can choose from a 3/8-inch orifice or a KF-25 fitting to withstand heavy use and minimize draw-down time. The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples. SHEL LAB Vacuum Ovens are equipped with silicone gaskets. Features include: Watlow PM9 Plus Controller Generous Usable Shelf Area Achieve Impressive Vacuum Levels Sizes Range from 0.6 – 4.5 Cubic Feet Built-in Overtemperature Protection 24 Month Limited Warranty Temperature Range Ambient +10°C to 220°C Temperature Stability ± 0.25°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 70 Minutes 150°C: 120 Minutes 220°C: 230 Minutes Operational Vacuum Range 3.0 to 29.9 inHg (101.6 to 1,012.5 mbar) Vacuum Gauge Range 0.0 to 29.9 inHg (0.0 to 1,012.5 mbar) Volume 127.4L (4.50 cu. ft.) Shelves 3 Max. Shelf Capacity 6 Max. Shelf Load 35.0 lb. (15.8 kg) Interior Dimensions (W x D x H) 18.0 x 24.0 x 18.0 in. (45.7 x 61.0 x 45.7 cm) Exterior Dimensions (W x D x H) 27.0 x 35.2 x 32.8 in. (68.6 x 89.5 x 83.3 cm) Weight 317.0 lb. (144.0 kg) Electrical Requirements 115V AC, 50/60Hz, 13.0A
$13,500.00 - $13,650.00
-
SHEL LAB SHEL LAB SVAC2 Vacuum Oven 1.67CF
SHEL LAB SVAC2 Vacuum Oven 47.2L Our revamped SHEL LAB SVAC vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. Vacuum ovens prevent residue accumulation on products and use lower temperatures than typical convection ovens. Your products are processed with minimal impact and maximum throughput. SHEL LAB vacuum ovens have stainless steel interiors and provide exceptional durability and stability. Available in 4 sizes, SVAC Vacuum Ovens support a diverse array of applications.To achieve required vacuum levels, users can choose from a 3/8-inch orifice or a KF-25 fitting to withstand heavy use and minimize draw-down time. The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples. SHEL LAB Vacuum Ovens are equipped with silicone gaskets. Features include: Watlow PM9 Plus Controller Generous Usable Shelf Area Achieve Impressive Vacuum Levels Sizes Range from 0.6 – 4.5 Cubic Feet Built-in Overtemperature Protection 24 Month Limited Warranty Please note that this vacuum oven does not include a pump or related accessories. Contact your SHEL LAB distributor for assistance with choosing the ideal pump and accessories for any application. Temperature Range Ambient +10°C to 220°C Temperature Stability ± 0.1°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 70 Minutes 150°C: 120 Minutes 220°C: 200 Minutes Operational Vacuum Range 3.0 to 29.9 inHg (101.6 to 1,012.5 mbar) Vacuum Gauge Range 0.0 to 29.9 inHg (0.0 to 1,012.5 mbar) Volume 47.2L (1.67 cu. ft.) Shelves 3 Max. Shelf Capacity 3 Max. Shelf Load 35.0 lb. (15.8 kg) Interior Dimensions (W x D x H) 12.0 x 20.0 x 12.0 in. (30.4 x 50.8 x 30.4 cm) Exterior Dimensions (W x D x H) 20.8 x 31.3 x 26.8 in. (52.8 x 79.5 x 68.1 cm) Weight 182.0 lb. (83.0 kg) Electrical Requirements 115V AC, 50/60Hz, 10.0A
$7,050.00 - $7,150.00
-
SHEL LAB SHEL LAB SVAC1 Vacuum Oven .56FC
SHEL LAB SVAC1 Vacuum Oven 15.9L Our revamped SHEL LAB SVAC vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. Vacuum ovens prevent residue accumulation on products and use lower temperatures than typical convection ovens. Your products are processed with minimal impact and maximum throughput. SHEL LAB vacuum ovens have stainless steel interiors and provide exceptional durability and stability. Available in 4 sizes, SVAC Vacuum Ovens support a diverse array of applications. To achieve required vacuum levels, users can choose from a 3/8-inch orifice or a KF-25 fitting to withstand heavy use and minimize draw-down time. The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples. SHEL LAB Vacuum Ovens are equipped with silicone gaskets. Features include: Watlow PM9 Plus Controller Generous Usable Shelf Area Achieve Impressive Vacuum Levels Sizes Range from 0.6 – 4.5 Cubic Feet Built-in Overtemperature Protection 24 Month Limited Warranty Please note that this vacuum oven does not include a pump or related accessories. Contact your SHEL LAB distributor for assistance with choosing the ideal pump and accessories for any application. Temperature Range Ambient +10°C to 220°C Temperature Stability ± 0.1°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 40 Minutes 150°C: 70 Minutes 220°C: 120 Minutes Operational Vacuum Range 3.0 to 29.9 inHg (101.6 to 1,012.5 mbar) Vacuum Gauge Range 0.0 to 29.9 inHg (0.0 to 1,012.5 mbar) Volume 15.9L (0.56 cu. ft.) Shelves 3 Max. Shelf Capacity 3 Max. Shelf Load 35.0 lb. (15.8 kg) Interior Dimensions (W x D x H) 9.0 x 12.0 x 9.0 in. (22.8 x 30.4 x 22.8 cm) Exterior Dimensions (W x D x H) 17.5 x 23.0 x 23.7 in. (44.4 x 58.4 x 60.2 cm) Weight 102.0 lb. (47.0 kg) Electrical Requirements 115V AC, 50/60Hz, 5.0A
$5,500.00 - $5,550.00
-
SHEL LAB SHEL LAB SVAC2E Economy Vacuum Oven 1.67CF
SHEL LAB SVAC2E Economy Vacuum Oven 47.2L, 115V SHEL LAB vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. They prevent residue accumulation on products and allow safe drying of materials at lower temperatures than typically required when using convection ovens. These units feature a radiant heating system that optimizes chamber space and provides excellent heat transfer and temperature uniformity. All SHEL LAB vacuum ovens are built with stainless steel chambers that are easy to clean and have exceptional durability. The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples. A selection of gaskets (for specific applications) and a small benchtop footprint increase the versatility of these ovens. The SHEL LAB economy series of vacuum ovens are outstanding in any application. Features include: Analog Temperature Control Stainless-Steel Interior Built-in Overtemperature Protection 24 Month Limited Warranty Temperature Range Ambient +15°C to 210°C Temperature Uniformity ± 9°C at 110°C Temperature Stability ± 0.5°C at 100°C Heat Up Times (From Ambient 20°C) 80°C: 30 Minutes 150°C: 45 Minutes 210°C: 120 Minutes Operational Vacuum Range 3.0 to 29.9 inHg (101.6 to 1,012.5 mbar) Vacuum Gauge Range 0.0 to 30.0 inHg (0.0 to 1,015.9 mbar) Volume 47.2L (1.67 cu. ft.) Shelves 2 Max. Shelf Capacity 2 Max. Shelf Load 35.0 lb. (15.8 kg) Interior Dimensions (W x D x H) 12.0 x 20.0 x 12.0 in. (30.4 x 50.8 x 30.4 cm) Exterior Dimensions (W x D x H) 18.5 x 27.8 x 25.3 in. (47.0 x 70.5 x 64.1 cm) Weight 108.0 lb. (49.0 kg) Electrical Requirements 115V AC, 50/60Hz, 10.0A
$2,950.00 - $3,000.00
-
SHEL LAB SHEL LAB SVAC1E Economy Vacuum Oven .56CF
SHEL LAB SVAC1E Economy Vacuum Oven 15.9L, 115V HEL LAB vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. They prevent residue accumulation on products and allow safe drying of materials at lower temperatures than typically required when using convection ovens. These units feature a radiant heating system that optimizes chamber space and provides excellent heat transfer and temperature uniformity. All SHEL LAB vacuum ovens are built with stainless steel chambers that are easy to clean and have exceptional durability. The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples. A selection of gaskets (for specific applications) and a small benchtop footprint increase the versatility of these ovens. The SHEL LAB economy series of vacuum ovens are outstanding in any application. Features include: Analog Temperature Control Stainless-Steel Interior Built-in Overtemperature Protection 24 Month Limited Warranty Temperature Range Ambient +15°C to 210°C Temperature Uniformity ± 9°C at 110°C Temperature Stability ± 0.5°C at 100°C Heat Up Times (From Ambient 20°C) 80°C: 30 Minutes 150°C: 45 Minutes 210°C: 120 Minutes Operational Vacuum Range 3.0 to 29.9 inHg (101.6 to 1,012.5 mbar) Vacuum Gauge Range 0.0 to 30.0 inHg (0.0 to 1,015.9 mbar) Volume 15.9L (0.56 cu. ft.) Shelves 2 Max. Shelf Capacity 2 Max. Shelf Load 35.0 lb. (15.8 kg) Interior Dimensions (W x D x H) 9.0 x 12.0 x 9.0 in. (22.8 x 30.4 x 22.8 cm) Exterior Dimensions (W x D x H) 15.5 x 19.0 x 22.5 in. (39.4 x 48.3 x 57.2 cm) Weight 59.4 lb. (27.0 kg) Electrical Requirements 115V AC, 50/60Hz, 5.0A
$2,430.00 - $2,480.00
-
SHEL LAB SHEL LAB SMO28-2 Large Capacity Forced Air Convection Oven 27.6CF
SHEL LAB SMO28-2 Large Capacity Forced Air Convection Oven 781L The SHEL LAB Model SMO28-2 is the largest general-purpose oven on the market. The independent overtemperature safety feature is user adjustable and provides added safety. The turbo blower-assisted forced airflow design coupled with a heavy-duty blower motor offers excellent temperature uniformity and fast recovery times. Airflow is directed evenly across all shelves and samples to ensure consistent drying, curing, and baking results. The SMO large capacity units are perfect for high volume sample and drying applications, including production processes. These units are especially ideal for glassware drying. These SHEL LAB ovens Feature: Three-inch Adjustable Exhaust Port Stainless Steel Shelves Independent Overtemperature Safety High-Temperature Silicone Door Seal No Exposed Heating Elements Added docking collars to intake and exhaust ports to allow ducting to be attached for venting exhaust out of the workspace Shelf standards moved to the sides of the unit for easier shelf installation Wrap Around Insulation Durable Powder Coat Paint Exterior Finish Digital Timer 24 Month Limited Warranty Includes 6 Shelves. Holds 16 Total Temperature Range +15°C to 260°C Temperature Uniformity ± 7C at 260°C Temperature Range Ambient +15°C to 260°C Temperature Uniformity ± 1.5°C at 80°C ± 3°C at 150°C ± 7°C at 260°C Temperature Stability ± 0.4°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 12 Minutes 150°C: 25 Minutes 260°C: 60 Minutes Volume 781.0L (27.6 cu. ft.) Shelves 6 Max. Shelf Load 75.0 lb. (34.0 kg) Access Port 1.75 in. (45 mm) Interior Dimensions (W x D x H) 30.8 x 25.0 x 61.0 in. (78.2 x 63.5 x 157.5 cm) Exterior Dimensions (W x D x H) 39.1 x 35.0 x 78.3 in. (99.4 x 88.9 x 198.9 cm) Weight 390.0 lb. (177.3 kg) Electrical Requirements 230V AC, 50/60Hz, 20.0A
$9,947.00 $9,000.00
-
SHEL LAB SHEL LAB SMO14-2 Large Capacity Forced Air Convection Oven 14.6CF
SHEL LAB SMO14-2 Large Capacity Forced Air Convection Oven 413L The SHEL LAB SMO14-2 features 14 cubic feet of economical oven space. The independent overtemperature safety feature is user adjustable and provides added safety. The forced, blower-assisted airflow design offers excellent temperature uniformity and fast recovery. A turbo blower and heavy-duty motor combine to direct air over the shelves and samples for even, constant drying, curing, and baking. The large capacity SMO ovens are perfect for high volume sample and drying applications, including production processes. These units are especially ideal for glassware drying. These SHEL LAB Ovens Feature: Three-inch Adjustable Exhaust Port Stainless Steel Shelves Independent Overtemperature Safety High-Temperature Silicone Door Seal Added docking collars to intake and exhaust ports to allow ducting to be attached for venting exhaust out of the workspace Shelf standards moved to the sides of the unit for easier shelf installation No Exposed Heating Wrap Around Insulation Durable Powder Coat Paint Exterior Finish Digital Timer 24 Month Limited Warranty Includes 3 Shelves. Holds 7 Total Temperature Range +15°C to 260°C Temperature Uniformity ± 7°C at 260°C Temperature Range Ambient +15°C to 260°C Temperature Uniformity ± 1.5°C at 80°C ± 3°C at 150°C ± 7°C at 260°C Temperature Stability ± 0.4°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 10 Minutes 150°C: 25 Minutes 260°C: 85 Minutes Volume 413.0L (14.6 cu. ft.) Shelves 3 Max. Shelf Load 75.0 lb. (34.0 kg) Access Port 1.75 in. (45 mm) Interior Dimensions (W x D x H) 30.8 x 24.8 x 31.0 in. (78.2 x 63.0 x 78.8 cm) Exterior Dimensions (W x D x H) 39.1 x 34.0 x 48.0 in. (99.4 x 86.4 x 121.9 cm) Weight 280.0 lb. (127.3 kg) Electrical Requirements 230V AC, 50/60Hz, 12.0A
$5,750.00
-
SHEL LAB SHEL LAB SMO5 Forced Air Convection Oven 4.9CF
SHEL LAB SMO5 Forced Air Convection Oven 138L The SMO5 is equipped with a stainless-steel interior for long-life operation and easy cleaning. With triple wall construction, this oven’s walls minimize external wall temperature which meets CE requirements to keep work spaces cool. These ovens are recommended for critical and analytical use in laboratory and pilot plant product research. Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing. This unit has a quick ramp-up time to 306°C for faster cycle times. This unit includes an advanced PID temperature control system for sensitive response. The SMO5 forced air oven delivers precise uniformity, air distribution, and the peace of mind expected of the SHEL LAB brand. Features of this oven include: Embedded Microprocessor Control with Countdown Timer Horizontal Forced Airflow 1.75in (45 mm) Access Port UL/CSA Approved CE Approval DIN 12880 Compliant 24 Month Limited Warranty Includes 2 Shelves. Holds 9 Total Temperature Range +20°C to 306°C Temperature Uniformity ± 5.4°C at 306°C Temperature Range Ambient +20°C to 306°C Temperature Uniformity ± 0.6°C at 80°C ± 1.7°C at 150°C ± 3°C at 306°C Temperature Stability ± 0.2°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 8 Minutes 150°C: 22.5 Minutes 306°C: 139 Minutes Volume 138.0L (4.9 cu. ft.) Shelves 2 Max. Shelf Capacity 9 Max. Shelf Load 50.0 lb. (22.6 kg) Access Port 1.75 in. (45 mm) Interior Dimensions (W x D x H) 21.0 x 19.4 x 20.7 in. (53.3 x 49.4 x 52.7 cm) Exterior Dimensions (W x D x H) 31.4 x 28.1 x 38.8 in. (79.8 x 71.4 x 98.6 cm) Weight 208.0 lb. (94.3 kg) Electrical Requirements 110-120V AC, 50/60Hz, 14.0A
$4,200.00 - $4,250.00
-
SHEL LAB SHEL LAB SMO3 Forced Air Convection Oven 3CF
SHEL LAB SMO3 Forced Air Convection Oven 85L The SMO3 has a quick ramp-up time to 306°C for faster cycle times. This unit includes an advanced PID temperature control system for sensitive response. These ovens are recommended for critical and analytical use in laboratory and pilot plant product research. Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing. This unit is equipped with a stainless-steel interior for long-life operation and easy cleaning. Its triple wall construction minimizes external wall temperature which meets CE requirements to keep workspaces cool. The SMO3 forced air oven delivers precise uniformity, air distribution, and the peace of mind expected of the SHEL LAB brand. Features of this oven include: Embedded Microprocessor Control with Countdown Timer Horizontal Forced Airflow 1.75in (45mm) Access Port UL/CSA Approved CE Approval DIN 12880 Compliant 24 Month Limited Warranty Includes 2 Shelves. Holds 7 Total Temperature Range +20°C to 306°C Temperature Uniformity ± 5.4°C at 306°C Options: SMO3: OVEN, FORCED AIR, 3 CU FT, 115V SMO3-2: OVEN, FORCED AIR, 3 CU FT, 230V Temperature Range Ambient +20°C to 306°C Temperature Uniformity ± 0.4°C at 80°C ± 1.8°C at 150°C ± 3.2°C at 306°C Temperature Stability ± 0.3°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 6 Minutes 150°C: 27 Minutes 306°C: 81 Minutes Volume 85.0L (3.0 cu. ft.) Shelves 2 Max. Shelf Capacity 7 Max. Shelf Load 50.0 lb. (22.6 kg) Access Port 1.75 in. (45 mm) Interior Dimensions (W x D x H) 16.5 x 19.5 x 16.2 in. (41.9 x 49.5 x 41.2 cm) Exterior Dimensions (W x D x H) 26.9 x 28.6 x 34.0 in. (68.4 x 72.7 x 84.0 cm) Weight 170.5 lb. (77.3 kg) Electrical Requirements 110-120V AC, 50/60Hz, 14.0A
$3,500.00 - $3,550.00
-
SHEL LAB SHEL LAB SMO1 Forced Air Convection Oven 1.4CF
SHEL LAB SMO1 Forced Air Convection Oven 39.4L The SMO1 has a quick ramp-up time to 306°C for faster cycle times. This unit includes an advanced PID temperature control system for sensitive response. These ovens are recommended for critical and analytical use in laboratory and pilot plant product research. Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing. This unit is equipped with a stainless-steel interior for long-life operation and easy cleaning. Its triple wall construction minimizes external wall temperature which meets CE requirements to keep work spaces cool. The SMO1's forced air ovens deliver precise uniformity, air distribution and the peace of mind expected of the SHEL LAB brand. Features of this oven include: Embedded Microprocessor Control with Countdown Timer Horizontal Forced Airflow 1.75in (45 mm) Access Port UL/CSA Approved CE Approval DIN 12880 Compliant 24 Month Limited Warranty Includes 2 Shelves. Holds 6 Total Temperature Range +20°C to 306°C Temperature Uniformity ± 5.4°C at 306°C Options: SMO1: OVEN, FORCED AIR, 1.4 CU FT, 115V SMO1-2: OVEN, FORCED AIR, 1.4 CU FT, 230V Temperature Range Ambient +20°C to 306°C Temperature Uniformity ± 0.5°C at 80°C ± 1.2°C at 150°C ± 5.4°C at 306°C Temperature Stability ± 0.3°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 5.5 Minutes 150°C: 15 Minutes 306°C: 96 Minutes Volume 39.4L (1.4 cu. ft.) Shelves 2 Max. Shelf Capacity 6 Max. Shelf Load 50.0 lb. (22.6 kg) Access Port 1.75 in. (45 mm) Interior Dimensions (W x D x H) 12.1 x 13.7 x 14.5 in. (30.7 x 34.9 x 36.8 cm) Exterior Dimensions (W x D x H) 22.7 x 23.5 x 31.5 in. (57.7 x 59.6 x 80.0 cm) Weight 126.5 lb. (57.4 kg) Electrical Requirements 110-120V AC, 50/60Hz, 12.0A
$3,200.00 - $3,250.00
-
ChemTek ChemTek - Snow Queen Oil Filtration
ChemTek - Snow Queen Oil Filtration Create isolate in minutes Redissolve and reformulate Dual Mixer
$29,000.00
-
ChemTek ChemTek - Planetary Centrifuge Vacuum Mixer
ChemTek - Planetary Centrifuge Vacuum Mixer The combination of centrifugal force and vacuum in a planetary vacuum centrifuge mixer allows for the rapid and thorough removal of residual solvents from extracts. The vacuum environment lowers the boiling point of solvents, enabling their efficient evaporation without the need for excessive heat. This is crucial for preserving the integrity and potency of heat-sensitive compounds, such as cannabinoids and terpenes, ensuring a purer final product. Pump is included. T-500 Power Supply: 220v 50/60Hz Max Speed: 2500 RPM Max Rotation: 1750 RPM (RPM * 0.7) Max Capacity: 2 x 500ml Noise: ≤65dB Dimensions: L: 25” W: 20” H: 26” Net Weight: 100kg Gross Weight: 140kg Includes: (6) 500ml 304 Stainless steel mixing cups (2) Mesh Baskets (1) ChemTek Backpack (1) Terp Squeeguee T-1000 Power Supply: 220v 50/60Hz Max Speed: 2500 RPM Max Rotation: 1750 RPM (RPM * 0.7) Max Capacity: 2 x 1000ml Noise: ≤65dB Dimensions: L: 32” W: 29” H: 43” Net Weight: 176kg Gross Weight: 151kg Includes: (6) 1000ml 304 Stainless steel mixing cups (2) Mesh Baskets (1) ChemTek Backpack (1) Terp Squeeguee T-1000 Power Supply: 220v 50/60Hz Max Speed: 2500 RPM Max Rotation: 1750 RPM (RPM * 0.7) Max Capacity: 2 x 1000ml Noise: ≤65dB Dimensions: L: 32” W: 29” H: 43” Net Weight: 176kg Gross Weight: 151kg Includes: (6) 1000ml 304 Stainless steel mixing cups (2) Mesh Baskets (1) ChemTek Backpack (1) Terp Squeeguee
$20,000.00 - $27,000.00
-
Fireplace Fuel Clean Burning, Odorless, and Smokeless Grain Ethanol, Fuel for Table Top Fire Pit
Fireplace Fuel Made in USA - From Grain Alcohol Bright Flame fireplace fuel contains two ingredients and were open about sharing our fuel recipe. The mixture is made from grain derived corn based ethanol and there is about 7.8% Isopropyl Alcohol added for enhanced flame ambiance. Compare this to a competitor and we have more isopropyl and will out perform other brands brightness. Ethanol 200 Proof - 87.49% by Wt% (CAS# 64-17-5) Isopropyl Alcohol (IPA) - 7.8% by Wt% (CAS# 67-63-0)
$12.99 - $1,200.00
-
Media Bros Media Bros CRAC Filter Media
COLOR REMEDIATION ACTIVATED CARBON (CRAC) FOR ETHANOL EXTRACTION Our powdered version of the G-CRAC, CRAC, is a highly modified bituminous coal carbon with increased surface area. CRAC is unique because it concentrates reactants via adsorption and then promotes their reaction on the pore's surface, which is best suited for heavy environmental clean-up. PH 7 DESCRIPTION Color Remediation Activated Carbon (CRAC) is a top-shelf carbon powder that has revolutionized extraction. Its high-performance selectivity sets it apart from other filter media and is crucial in producing a high-quality extract free of undesirables and impurities. CRAC stands out due to its meticulous preparation process. Its granular consistency makes it easy to handle and is thoroughly sifted, which minimizes the risk of carbon or dust contamination. This commitment to quality creates a safer, cleaner work environment. CRAC is also environmentally friendly; it's non-toxic, biodegradable, and recyclable. This added layer of safety doesn't compromise its effectiveness; instead, it ensures the integrity of the end product and the health of your workforce. CRAC is pH-neutral double activated, which maximizes the carbon's surface potential, allowing for more efficient adsorption and color remediation. By opting for CRAC, you are choosing a product that has been fine-tuned to deliver the best possible extraction results. CRAC stands out not just for what it contains but also for what it doesn't. CRAC delivers all the microporous, mesoporous, and macroporous media you can handle, providing comprehensive remediation of ethanol extract and oil purity you can count on. At Media Bros, we understand the diverse needs of various operations. Hence, CRAC is available in a 1.5 kg pouch, a 4 kg package, a 10 kg bucket, and a 100 kg drum. Regardless of your operation's size, there is a bag of CRAC tailored to your needs. Wine, cheese, peanut butter, jelly, CRAC, and Activated Alumina. The combination of CRAC and Activated Alumina as a filter bed provides a practical and robust solution for ethanol extraction, creating a superior filter blend that enhances the overall remediation process. NSF Certified Use Media Bros Activated Alumina as an alumina media filter bed for best results. Solvent Type Hydrocarbon + Ethanol Color Remediation Level Heavy/High Pesticide Remediation Level High Selectivity/Polarity Level Less Selective/Most Polar Heavy Metal Remediation Yes Moisture Remediation Level Low Fats/Lipids/Waxes Level Medium Crystal Growth Fast Depth Filtration No Flow Rate Low Flow pH Level Neutral (pH 7) Best For Older Biomass, Low Quality Suitable for Reruns Yes Distillation Clean-up High Scrub
$75.00 - $4,200.00
-
Media Bros Media Bros G-CRAC Filter Media
GRANULAR COLOR REMEDIATION ACTIVATED CARBON (G-CRAC) FOR EXTRACTION This highly modified granular bituminous coal carbon is specifically engineered to tackle the heaviest environmental contaminants like pesticides, heavy metals, and other environmental factors; G-CRAC is unique in that it concentrates reactants via adsorption and then promotes their reaction on the surface of the pores. PH 7 DESCRIPTION Pssst, bro. If you are looking for a non-toxic, environmentally friendly, highly effective solution to remediate pesticides and heavy metals in biomass, check out G-CRAC. This breakthrough granular activated carbon solution is specifically designed to target and eliminate environmental contaminants in your concentrates and revive your bottom line. The standout feature of G-CRAC is its exceptional ability to remove smoke, pesticides, and heavy metals. It can also reanimate older biomass, giving new life to lower-quality yields. Lost all your profits because of environmental factors outside of your control? No, you didn't — because G-CRAC is here to save the day. Just add G-CRAC to your inline extraction process and let it do its thing. It will absorb those pesky environmental contaminants, leaving you with a product that is free of toxins and safe for consumption. Plus, G-CRAC won't disrupt the flavor or aroma of your extract: like its chunky cousin, CRAC, G-CRAC utilizes a double-activated, pH-neutral, granular blend. This unique feature allows efficient inline processing without compromising terpene retention or processing speed. This product doesn't just meet industry standards - it sets them. With G-CRAC, you can be confident that your concentrates are free from harmful contaminants, ensuring a pure, high-quality end product. Like all of Media Bros' premium filter media, G-CRAC is a food-grade, non-toxic, organic formulation. It is safe to use, environmentally friendly, and will not alter the chemical composition of your concentrates. Packaged in: 1.5 kg pouch, 10 kg bucket, and 100 kg drum NSF Certified Solvent Type Hydrocarbon + Ethanol Color Remediation Level Heavy/High Pesticide Remediation Level High Selectivity/Polarity Level Moderately Selective/Medium Polarity Heavy Metal Remediation Yes Moisture Remediation Level Low Fats/Lipids/Waxes Level Medium Crystal Growth Fast Depth Filtration No Flow Rate High Flow pH Level Neutral (pH 7) Best For Older Biomass, Low Quality Suitable for Reruns Yes Distillation Clean-up High Scrub
$75.00 - $3,600.00
-
Media Bros Media Bros CRY+ FILTER MEDIA
Media Bros CRY+ FILTER MEDIA CRY+ is our largest granule size. With a mesh size of 16-x30, this media allows operators to run high-flow processes while maintaining a consistent quality output. DESCRIPTION: CRY+™ Filtration Media: High-Flow, High-Efficiency Filtration CRY+™ is our premium filtration media, designed with a larger granule size (16-30 mesh) to deliver unmatched flow rates without compromising the quality of your extraction. Whether you're processing high volumes or working with challenging biomass, CRY+™ ensures consistent, effective results in every run. Engineered for operators who demand speed and precision, CRY+™ is ideal for high-flow processes where residence time and color remediation are key. With a recommended solvent ratio of 6:1 to 10:1 and the ability to operate at room temperature or below -10°C without clogging, CRY+™ offers flexibility and efficiency for modern extraction setups. Key Features: Larger Granule Size (16-30 mesh): Delivers faster flow rates while maintaining purification performance. Needle Valve Recommended: Fine-tune flow rates for optimal color correction, especially when processing dark or oxidized material. Temperature Resilience: Performs optimally at sub-zero temperatures without clogging. Technical Specs: Use a 4-6” diameter CRC column for best results. Recommended operating pressure: 20-45 psi. Media ratio: 200-300g per 1 lb of biomass. Available Exclusively Through Our Dealer NetworkFind a dealer near you to purchase CRY+™: *A needle valve is recommended on the output (bottom) of the filtration column to properly fine-tune your flow rates. If you are processing dark or oxidized material, a tighter flow restriction will increase residence time, allowing for better color correction. TECHNICAL SPECS Solvent Type Hydrocarbon Color Remediation Level Moderately Heavy/High Pesticide Remediation Level Medium Selectivity/Polarity Level Moderately Selective/Medium Polarity Heavy Metal Remediation Yes Moisture Remediation Level Moderate Fats/Lipids/Waxes Level Medium Crystal Growth Fast Depth Filtration No Flow Rate High Flow pH Level Neutral (pH 7) Best For Fresh Frozen, Nugs, High Quality Suitable for Reruns Yes Distillation Clean-up Moderate Scrub
$90.00 - $900.00
-
Media Bros Media Bros Medium flow CRX-M
Media Bros Medium flow CRX This non-reactive medium flow variant allows operators to increase operating pressures and surface area for a more fine-tuned process. PH 7 Description: Introducing CRX Medium Flow™ (CRX-M™), a not-quite-powder/fine-grain premium filter media formulated for non-reactive, high flow and high-pressure hydrocarbon extraction. Its texture is designed to replace traditional powdered media like B80 without channeling and clogging issues commonly encountered with conventional powders. Extractors accustomed to traditional powders like B80 will find that CRX-M™ offers similar flow properties but with the added benefit of superior terpene retention. Like all of our premium blends, CRX-M™ is non-reactive, ensuring it's safe and easy to handle in your lab setting. It eliminates the need for extensive clean-up, saving you time and effort. CRX-M™ has all the benefits of its more granular twin, the flagship CRX™. It is a "perfect scrub" media, ideal for high-quality biomass and nug run processing. You want total control over flow and ensure the terpenes and flavonoids are retained from plant to extracted oil. Extraction labs vary in size, and so does our range of filter media. Our CRX-M™ product is available in three convenient packaging options: a 1.5 kg pouch, a 10 kg bucket, and a 100 kg drum. Whether operating on a small scale or running an extensive industrial process, we have the perfect packaging to meet your needs. Technical Specs: Solvent Type Hydrocarbon Color Remediation Level Average/Moderate Pesticide Remediation Level Low Selectivity/Polarity Level Moderately Selective/Medium Polarity Heavy Metal Remediation No Moisture Remediation Level Low Fats/Lipids/Waxes Level Medium Crystal Growth Fast Depth Filtration No Flow Rate Moderate Flow pH Level Neutral (pH 7) Best For Fresh Frozen, Nugs, High Quality Suitable for Reruns No Distillation Clean-up Low Scrub Before you get started, please remember this: As CRX™ and CRY™ are not powders designed not to absorb moisture before use, no baking or preparation is needed. For optimal success, ensure your flow is gentle and consistent. RATIOS Solvent to Biomass: ratios range from 6:1 to 10:1, depending on the quality of the plant matter you are distilling—lower ratios for top-tier biomass and higher ratios for older or lower-quality biomass. Media to Biomass: Load 150 - 250 grams of filter media into filtration housing for every 1 lb of biomass. The media quantity used is dependent on the quality of the biomass. Higher-quality biomass requires less media. Lower-quality biomass requires more media. The lookup table can be used as a reference, but because every kind of plant matter is different, you will need to experiment a little bit to achieve the best results. That said, this chart is an excellent baseline from which to start. TEMPS To ensure optimal performance, keep the temperature at -10°C or below while using the media. Our media is designed to prevent clogging. FLOW When transferring from the biomass vessel to the recovery vessel, maintain a maximum flow rate of 1 GPM. Our media performs best with a consistent and gentle flow. To prevent channeling, avoid sudden hydraulic surges through the CRC column. A shower or initial fill of the column is highly recommended for optimal results. YIELD Any lost yield can be fully recovered by flushing the media with solvent. Most users report achieving substantial yield gains by maintaining high solvent-to-biomass ratios or flushing our media after an extraction transfer.
$30.00 - $1,600.00
-
High Purity Paraffin Lamp Oil - Smokeless, Clean Burning- Kosher - 99.5% Pure
Paraffin Lamp Oil 99.5% Pure - Kosher BVV's 99.5% High Purity Lamp oil is great for indoor and outdoor use. It is a clear, water-white, oily liquid with a low viscosity, and will not thicken with age. Our lamp oil has an extremely low sulfur and nitrogen content. It's a highly refined mineral oil that comes from petroleum and is stripped of its odors. The shelf-life of paraffin lamp oil will last indefinitely if stored in a sealed container. Paraffin oil is a fuel source used to power oil lamps, providing light in a situation where electricity is unavailable, making it a valuable item to stockpile for emergency situations due to its ability to provide light without needing batteries or power. If you're a prepper looking for a fuel source that won't sour with age, we recommended our paraffin lamp oil.
$18.27 - $4,509.00
-
SSP Corporation Tube Stub Adapter
Tube Stub Adapter Duolok Tube Stub Adapter, 3/8 Tube Fitting x 1/2 Tube Stub, 316 SS. Body Material 316 SS Connection 1 - Type Tube Fitting Connection 1 - Size 3/8 in Connection 2 - Type Tube Stub Connection 2 - Size 1/2 in Brand Series Duolok Shape Straight End Connections TF x Tube Stub Production Category 1 Handle Type 0 Handle Color
$30.00
-
Caffeine Powder ≥99.0% USP/FCC/Food Grade
Pure Caffeine Powder USP/FCC/Food Grade - ≥99.0% Pure Our Caffeine Powder has a nice fine consistency. It is an anhydrous product free of any water/moisture. Synthetically derived. Chemical Formula: C8H10N4O2 Molecular Weight: 194.19 g/mol CAS Registry Number: 58-8-2 Appearance White Powdery Crystalline Odor: None Density 1.23 g/cm3 @ 20 °C Boiling Point: 178C/352F Solubility in water: Moderately Soluble GHS Pictograms: GHS Signal Word: Warning GHS Hazard Statements: H302 GHS Precautionary Statements P264, P270, P301+P317, P330, P501 Coffee drinks Size in oz. (mL) Caffeine (mg) Brewed 8 (237) 96 Brewed, decaf 8 (237) 2 Espresso 1 (30) 64 Espresso, decaf 1 (30) 0 Instant 8 (237) 62 Instant, decaf 8 (237) 2 Teas Size in oz. (mL) Caffeine (mg) Brewed black 8 (237) 47 Brewed black, decaf 8 (237) 2 Brewed green 8 (237) 28 Ready-to-drink, bottled 8 (237) 19 Sodas Size in oz. (mL) Caffeine (mg) Citrus (most brands) 8 (237) 0 Cola 8 (237) 22 Root beer (most brands) 8 (237) 0 Energy drinks Size in oz. (mL) Caffeine (mg) Energy drink 8 (237) 71.9 Energy shot 2 (60) 215
$23.00 - $830.00
-
10LB+ EVO Certified Closed Loop Extractor
10LB+ EVO Certified Closed Loop Extractor The 10LB+ EVO Certified Closed Loop Extractor builds upon the proven success of the 5LB EVO, pushing the boundaries of performance, capacity, and innovation. Tailored for extractors scaling up their operations, this system retains the advanced features of its predecessor while offering increased throughput and operational efficiency to meet the demands of larger-scale production. With a rugged design suited for both cured and fresh frozen materials, the 10LB+ EVO supports low-temperature extractions and rapid solvent recovery, leveraging 1.5" full-bore recovery lines to reduce cycle times without compromising on extract quality, safety, or ease of operation. Optimized for a 10-pound extraction process at a 5:1 butane-to-biomass ratio, the system includes dual 55LB jacketed and baffled solvent collection/recovery tanks and an additional jacketed material column for pre-packing. This feature enhances efficiency and ensures seamless processing. With 3X 6"x36" jacketed material columns, each equipped with individual inline CRCs (Color Remediation Columns), the 10LB+ EVO guarantees maximum extraction efficiency, exceptional extract purity, terpene preservation, and unmatched filtration flow rates. Engineered for compliance and reliability, the 10LB+ EVO is peer-reviewed and 3P-certified to meet or exceed Class 1 Division 1, NFPA 58, and ASME standards, incorporating 3A sanitary compression and Tri-Clamp fittings for durability and precision. Capable of processing 80+ pounds of biomass per 8-hour shift, this system delivers the scalability, precision, and affordability extractors need to elevate their production capabilities. Key Features 1.5" Full-Bore Recovery LineAccelerate recovery with oversized 1.5” lines, minimizing cycle times and boosting throughput. Inline and Independent Adsorbent Filtration ColumnsEnsure pristine extract clarity and unadulterated terpene profiles with individual inline CRCs for each material column. Optimized for maximum flow rates and minimal retention time to preserve flavor. Independent Solvent InjectionReduce downtime and streamline operations with independant solvent injection for smooth transitions and increased efficiency. Additional Standby Material ColumnIncrease throughput with an extra pre-packed material column, ready to swap in for non-stop processing. Sanitary Compression and Tri-Clamp FittingsBuilt for reliability, the system’s sanitary compression and Tri-Clamp fittings ensure leak-proof assembly and simplified maintenance. Processing Power Capacity Per Batch: 10LB Cycle Time: 30-45 Minutes* Capacity: 80+lb, per 8-hour shift* Extracts: isolate/sauce, distillate, vape pens, shatter, and wax/sugar *Cycle Time & Capacity vary based on heater and chiller pairing* Specifications 3X 6"x36" 5LB Material Column 3X 6"x6" Adsorbent Filtration Column 3X 1-5um Dutch Weave Sintered disk filter stacks 1.5"X 48" Braided Inline molecular sieve recovery line 10X 1.5" Certified Borosilicate Sight Glasses 5X 250 PSI ASME Safety Valves 5X -30hg-250PSI Compound Pressure Gauges 1.5" Full Bore Recovery Lines 1/2" Compression process Flow lines Footprint (DxWxH) 30"x68"x79" Weight: 650 lb Maximum Pressure Rating: 250PSI Compliance Class 1, Division 1 compliant Designed to ASME standards NFPA 58 LPG compliant 3P Certified
$25,000.00
-
24" & 36" Filter Paper (Qualitative, Large Diameter)
Ashless Filter Papers - Qualitative Ashless quantitative and qualitative filter papers provide laboratory grade filtration for extraction systems and are specifically used in combination with a Buchner funnel to remove fats, waxes and any other unwanted contaminants from your solution. These filter papers are used in the pre-processing stage of short path distillation to clean up the material prior to processing. Key Features: ISO 9001 Approved Manufactured from alpha-cellulose and cotton linters High Purity and low background Consistent performance Low ashless content: <0.1% Whatman equivalent quality Pre-Cut for ease of use Specifications: Classification Qualitative Sizes Available: BIO-1 11um - Medium BIO-4 20um - Fast BIO-5 2.5um - Slow BIO-6 3um - Slow Ash Content <0.1% Quantity per Pack 100 Diameter 24 - 36" Technical Data: Grade Particle Retention Appearance Speed Ash Content (%) Basis Weight (g/m2) Wet burst (mm H2O) BIO-1 11um Smooth Medium <0.1 80.0±4.0 >140 BIO-2 8um Smooth Medium <0.1 80.0±4.0 >140 BIO-4 20um Smooth Fast <0.1 80.0±4.0 >120 BIO-5 2.5um Smooth Slow <0.1 80.0±4.0 >180 BIO-6 3um Smooth Slow <0.1 80.0±4.0 >180 BIO-40 8um Smooth Medium <0.007 80.0±4.0 >140 BIO-41 20-25um Smooth Fast <0.007 80.0±4.0 >120 BIO-42 2.5um Smooth Slow <0.007 80.0±4.0 >180 BIO-43 16um Smooth Medium to Fast <0.007 80.0±4.0 >120 BIO-44 3um Smooth Slow <0.007 80.0±4.0 >180
$225.00 - $775.00
-
CGA 320 CO2 Tank Regulator
This tank regulator will control the rate of fluid or gas flow using a butterfly valve. Our BVV butterfly valve is rated to 1000 psi, and is made of 304 stainless steel and features a PTFE valve seat making it compatible with CO2. The output will connect to a 1/2" JIC flare hose (seen here BVV JIC 1/4" Hose).
$125.00
-
CGA 326 Nitrous Oxide Tank Regulator
This tank regulator will control the rate of fluid or gas flow using a butterfly valve. Our BVV butterfly valve is rated to 1000 psi, and is made of 304 stainless steel and features a PTFE valve seat making it compatible with N2O. The output will connect to a 1/4" barb for tubing. (seen here BVV 1/4" Tubing).
$140.00
-
Centrifuge C750
BVV C750 Centrifuge The BVV C750 Centrifuge is a large-capacity desktop centrifuge with broad functionality suitable for various applications. The BVV C750 Centrifuge can be used to separate or concentrate samples by density or utilized to separate solid constituents from liquid constituents. The BVV C750 Centrifuge has a maximum speed of 4000rpm with a maximum centrifugal force is 3354xg which allows for fast separation times. It's user friendly simple to use touch screen interface allows for easy operation even when wearing gloves. With built-in cooling fans, the BVV C750 ensures sample preservation while allowing for heat-assisted separations. While the BVV C750 is not actively heated or refrigerated it typically operates at 130F/54C allowing for quick and efficient separations. For Solid & liquid separations we recommend utilizing our 25 Micron Large Rosin Bags, The BVV C750 comes with 3 sets of centrifuge baskets including: 4X 750ML Stainless Steel Separators (300 Gram Capacity 1,200 Grams Total) 4X 5X 50ML Centrifuge Tube Plastic Inserts (20X 50ML Centrifuge Tube Capacity) *Centrifuge tubes not included* 4X 750ML Polypropylene Bottles 10X Large Rosin Bags 25 Micron Features •Digital LCD display with a user-friendly interface for easy operation. •Microprocessor control, DC brushless motor with low noise and high accuracy. •Dual locking design with lock alarm on the interface. •Centrifuge chamber is made of 304 stainless steel to avoid corrosion. •Can switch RPM/RCF during operation. •Store up to 10 preset programs •Sound and indicator alarm for defaults. •Protection including door closing, malfunction, over-speed, over-heating, imbalance, etc. •Speed is adjustable to avoid sample suspension to ensure the performance. Technical Specifications Model BVVC750 Max Capacity 4*750mL Max Speed 4000rpm Max RCF 3354Xg Speed Accuracy ±10r/min Time Setting 0-99min59s Soft Brake 9 Ramps Noise ≤65dB(A) Power Supply 110V 60HZ Power Consumption 1000W Net Weight 114lb/52kg Dimensions 24"x19"x14"
$5,900.00
-
Synder NFG Membrane (600-800Da MWCO)
Synder NFG Membrane With a pore size ranging between 0.1-10nm,Synder Filtration's nanofiltration membranes enable the passage of water and certain salts through the membrane while effectively retaining multivalent ions, low molecular weight molecules, sugars, proteins, and various organic compounds. A result of extensive research and development, Synder's NFS, NFX, NFW, and NFG nanofiltration membrane products have demonstrated exceptional resistance to fouling, a high level of selectivity, and the physical durability necessary for diverse industrial separation processes. Specifically, NFS, NFX, and NFW exhibit outstanding rejection of MgSO4 and lactose, while NFG is designed to partially remove monosaccharides from oligosaccharides. These nanofiltration membranes, as a whole, have the capacity to significantly reduce levels of hardness, nitrates, sulfates, tannins, turbidity, color, total dissolved solids (TDS), and moderate levels of salt from feed water streams. The proven performance of Synder's nanofiltration membranes makes them well-suited for a broad spectrum of industrial applications including the desolvation of ethanol from botanical extract solutions. BVV utilizes 4X NFS 2540 Membranes inside our Nanofiltration Skid to recovery ethanol at 30 Gallons per hour. Specifications Polymer: Proprietary PA TFC Approx. Molecular Weight Cutoff: 600-800 DA Typical Operating Flux 55-60 GFD Average Lactose Rejection: 60% Average MgSO4 Rejection: 50% Average NaCl Rejection: 10% Maximum Operating Pessure <95F/35C: 600PSI/41.4 Bar Maximum Operating Pressure >95F/35C: 435PSI/30 Bar Maximum Pressure Drop per Element: 15PSI/1.0 Bar Maximum Pressure Drop per hosing: 60PSI/4.1 Bar Maximum continuous Operation Temperature: 122F/50C Maximum CIP Temperature: 104F/40C Maximum Temperature Operating pH Range: 4-9 Ambient Temperature Operating pH Range: 4-10 Maximum Temperature Cleaning pH Range: 3-10 Ambient Temperature Cleaning pH Range: 3-10.5
$577.50 - $1,277.50
-
12" Hemispherical Extractor Lid with 6" Triclamp Center
12" Hemispherical Extractor Lid with 6" Triclamp Center This End Cap comes with Four FNPT Threaded connections, two 2" Tri-Clamp ferrules welded to the end cap, and a 6" Tri-Clamp center port. They allow the user to adapt and connect threaded connections to the NPT ports and Tri-Clamp lid connections to the others. These 7 connections are welded on a 12" Hemispherical Tri-Clamp End Cap. Specifications Material: 304 Stainless Steel Connection Types: 2" Tri-Clamp (2x) 6" Center Tri-Clamp Port 12" Tri-Clamp 1/4" - 18 FNPT (x2) 1/2" - 14 FNPT (x2) Standard: 3A
$350.00
-
1/2" Fractional Tube Fitting Hose
1/2" Fractional Tube Fitting Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications. They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have a tube stub on each end that fits a standard compression fitting. ***Note: Do not exceed the specified hose bend radius or the inner PTFE liner will kink and the hose integrity will become compromised and should not be used. Specifications: Connection Type(s): 1/2" Tube Stub Liner Material PTFE (Teflon) Braid Material 304 Stainless Steel Swivel Material 304 Stainless Steel Temperature Rating -65°F to 450°F (-54°C - 232°C) Pressure Rating 1500 PSI Chemical Resistance Excellent Max Bend Radius 5 1/2"
$85.00 - $130.00
You have seen 192 out of 1540 products