Chemglass Glassware

14 products


  • Sale -13% Chemglass Thermometer Inlet Adapter 14/20 w/ #7 Thread Shop All Categories Chemglass

    Chemglass Thermometer Inlet Adapter 14/20 w/ #7 Thread

    Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermo-meters or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon® compression cap and Viton o-ring. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    $30.00$26.00

  • Chemglass Hollow stopper with closed bottom Shop All Categories Chemglass Pennyhead Stopper Hollow 10/18

    Chemglass Hollow stopper with closed bottom

    Chemglass Hollow stopper with closed bottom   ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.*** ***All units are inspected for broken glass or parts before unit is shipped. If unit arrives damaged or glass is broken (this does not include minor imperfections or scuffs in glassware), Customer MUST contact BVV™ within 3 days of delivery to file a claim and receive a replacement part. If customer DOES NOT contact BVV™ within 3 days of delivery responsibility for replacement parts falls on the customer and they must pay for replacement pieces.

    $15.00 - $20.00

  • Sale -29% Chemglass Straight Connecting Adapter 24/40 Shop All Categories Chemglass

    Chemglass Straight Connecting Adapter 24/40

    Chemglass Straight Connecting Adapter 24/40 This Chemglass adapter allows you to connect 2 female jointed pieces together.       ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.*** ***All units are inspected for broken glass or parts before unit is shipped. If unit arrives damaged or glass is broken (this does not include minor imperfections or scuffs in glassware), Customer MUST contact BVV™ within 3 days of delivery to file a claim and receive a replacement part. If customer DOES NOT contact BVV™ within 3 days of delivery responsibility for replacement parts falls on the customer and they must pay for replacement pieces.    

    $52.00$37.00

  • Chemglass Glass Thermometer Bushing Kit Shop All Categories Chemglass Default Title

    Chemglass Glass Thermometer Bushing Kit

    Glass Thermometer Bushing Kit This non-mercury glass thermometer has a 10/30 ground glass joint and is 14" long with a temperature range of -10°C to 250°C with 1-degree increments. This thermometer is made in Germany and is Serialized and Calibrated. Chemglass Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.     ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.*** ***All units are inspected for broken glass or parts before unit is shipped. If unit arrives damaged or glass is broken (this does not include minor imperfections or scuffs in glassware), Customer MUST contact BVV™ within 3 days of delivery to file a claim and receive a replacement part. If customer DOES NOT contact BVV™ within 3 days of delivery responsibility for replacement parts falls on the customer and they must pay for replacement pieces.

    $110.00

  • Sale -33% Chemglass Column, Chromatography, 45/50 Outer Rodaviss Joint New Products Chemglass

    Chemglass Column, Chromatography, 45/50 Outer Rodaviss Joint

    Column, Chromatography, 45/50 Outer Rodaviss Joint Specifications: Inside Diameter (Inch): 3 Length (Inch): 24 Outer Rodaviss Joint: 45/50         The General purpose column having a PTFE stopcock and a top Rodaviss® outer joint. Can be used as a gravity eluted column or a flash columm, when used with optional CG-1195 flow controller and CG-1194 reservoir. Column is constructed using MEDIUM WALL TUBING. Glass wool (not supplied) is used to support column packing. Lower end of the column has a round bottom. Connections between the column, reservoir and flow control adapter are made using Rodaviss® joints. The unique design of the Rodaviss® joint affords a grease free seal while holding glassware together without clamps. Column is supplied complete with a CG-182 open top cap and o-ring.     ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.*** ***All units are inspected for broken glass or parts before unit is shipped. If unit arrives damaged or glass is broken (this does not include minor imperfections or scuffs in glassware), Customer MUST contact BVV™ within 3 days of delivery to file a claim and receive a replacement part. If customer DOES NOT contact BVV™ within 3 days of delivery responsibility for replacement parts falls on the customer and they must pay for replacement pieces.

    $225.00$150.00

  • 500mL Single Neck RBF, 24/40 Outer Joint Shop All Categories Chemglass

    500mL Single Neck RBF, 24/40 Outer Joint

    Chemglass 500mL Single Neck RBF, 24/40 Outer Joint Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. 

    $40.00

  • Sale -47% 10mm OD Serrrated Hose Barb, #15 O-Ring Joint Shop All Categories 0

    10mm OD Serrrated Hose Barb, #15 O-Ring Joint

     10mm OD Serrrated Hose Barb, #15 O-Ring Joint     Adapters, Airfree, Schlenk, Style "B", 15mm O-Ring Joint to 10mm Serrated Hose Connection   The AF-0070 adapters are to be used with either a Cajon® fitting on the main ports or at the ends of the manifold with heavy wall rubber vacuum tubing. Serrated hose connection adapters list the OD of the hose connection at the middle ring. Each adapter is supplied complete with one #116 Viton o-ring. Adapters are to be attached to the manifold via a CG-150-05 S.S. pinch clamp.

    $30.00$16.00

  • Sale -40% Cap Stopper, O-Ring #15 Shop All Categories 0

    Cap Stopper, O-Ring #15

    Cap Stopper, O-Ring #15     Stopper, #15 O-Ring Joint, Airfree, Schlenk For use with the AF-0060 or AF-0061 manifolds or any Airfree® component with an o-ring as a closure. Supplied complete with one Viton O-Ring.

    $25.00$15.00

  • Flask, Round Bottom, 1000mlL, 24/40, Heavy Wall, Single Neck Shop All Categories Chemglass

    Flask, Round Bottom, 1000mlL, 24/40, Heavy Wall, Single Neck

    Flask, Round Bottom, 1000mlL, 24/40, Heavy Wall, Single Neck Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. 

    $52.00

  • Sale -54% Chemglass Flushing Airfree Adapter Shop All Categories Chemglass

    Chemglass Flushing Airfree Adapter

    Chemglass Flushing Airfree Adapter    Similar to AF-0509 but having a top outer joint and lower inner joint of the same size. Addition of the outer joint permits use of the larger sizes of the CG-3022 septum stoppers for repeated needle penetrations. Adapter also allows for evacuation and transfer of product into another vessel with the same size standard taper joints. Available with a choice of a 4mm glass high vacuum stopcock having a S.S. constant pressure retention device or 4mm PTFE stopcock.    PLEASE NOTE: NOT SUPPLIED WITH SEPTUM STOPPER.

    $80.00 - $95.00

  • Sale -52% Vacuum Gauge Adapter, #15 O-Ring, AirFree New Products Chemglass

    Vacuum Gauge Adapter, #15 O-Ring, AirFree

    A 0-12mm Chem-Vac™ Chem-Cap® valve having an o-ring joint for connection to the right hand side of AF-0300-03 vacuum manifold. Adapter is  #15 o-ring joints. Complete gauge consists of a glass portion, a S.S. bushing drilled and tapped for 1/8” NPT permitting direct connection to gauge tube, and an open top GL-25 screw cap.

    $230.00$110.00

  • Sale -39% VACUUM MANIFOLDS, INERT GAS, AIRFREE®, SCHLENK with Clamps New Products Chemglass

    VACUUM MANIFOLDS, INERT GAS, AIRFREE®, SCHLENK

    Double bank manifold available in 3port configuration. Forward facing 0-8mm Chem-Vac™ Chem-Cap® valves permit easy operation of manifold inside of a fume hood. Main ports are spaced 100mm center to center with an additional 2 ports on the upper bank that can be used for gauging or sealed with AF-0210 stoppers. All connection ports are #15 o-ring joint connections that incorporate a greaseless o-ring seal. Manifold is modular in design allowing the user tremendous flexibility in performing experiments. Adapters from #15 o-ring joints to standard taper components, serrated hose connections or 3/8" Cajon® fittings are available to allow the ports to be used with existing glassware. Replacement Chem-Vac™ Chem-Cap® plug is listed below.

    $1,561.00$950.00

  • Sale -32%