Made by BVV
2L Rotary Evaporator Power Cable
Replacement Power cable for BVV 2L Rotary Evaporator.
$15.00
BVV 2 & 4 Cylinder Recovery Pump Replacement Fan
BVV 2 & 4 Cylinder Recovery Pump Replacement Fan Replacement fan for BVV2CYL and BVV4CYL Recovery pumps.
$50.00
Swivel Bosshead
This swivel boss head is made out of die-cast alloy is nickel plated and will fit rod diameters up to 16mm. The boss head can be adjusted and locked to any angle (360°). It is also designed to carry heavy loads and prevent torque damage. Note:Clamps and rods are NOT included.
$10.00
Siemens Touch Screen Controller with Explosion Proof Housing for Centrifuges
Siemens Touch Screen Controller with Explosion Proof Housing for Centrifuges Disclaimer: When bought separately and NOT with our Centrifuge this item will have no warranty and all sales are final. Industrial Centrifuges are used to separating liquids from solids and this style of centrifuge excels at alcohol extraction by forcefully separating the alcohol from the biomass. Controller: This centrifuge is controlled by a Siemens Smart Line PLC. This PLC is pre-programmed to have both a soaking cycle, shown as AGITATION TIME on the screen, and a spin drying cycle, made of 4 separate specifications. SPIN TIME 1 through 4 allow the user to choose four different speeds and however long they wish to be at each speed. All four parameters labeled as SPIN TIME combine to make one spin cycle when the Spin button is pressed. To change a parameter, simply tap on the number to be changed and type in the desired value when prompted on screen. Any number displayed within a white box can be adjusted. SPEED SET: This number represents the RPM as a percentage of the machine max speed. In this case the max speed is 1500RPM. SET: This column will dictate how long the centrifuge spins for a cycle or at a specified speed within the cycle. For the Agitation Time, the Set value will control the total length of the agitation cycle. The FWD/REV TIME will control how long the basket will spin in one direction before reversing to cause agitation. The “current” value will only count up while at the set speed for the agitation cycle. CURRENT: The “current” column will give a readout of how long the basket has been spinning at the set speed. This value will not increase while the centrifuge is increasing speed between SPIN TIME values. When running the agitation cycle, it will be complete when the count of seconds in the CURRENT reaches the value in the SET column. The centrifuge will stop automatically. For the spin cycle, the centrifuge will go through all 4 set SPIN TIME values, the CURRENT column will only begin to count when the centrifuge is at the set speed. The cycle time will not account for time taken to get up to speed. Temperature: Shows a live readout of the temperature inside the centrifuge.Inlet Valve and Drain Valve: These are two pre-programmed buttons that can be used with electronic valves. This unit does not come standard with these valves, but leaves the option open for them to be added. Electrical Power Size Specification 45L Input: 240V 1ΦOutput: 240V 3Φ 4kW 160L Input: 240V 1ΦOutput: 460V 3Φ 7kW 280L Input: 240V 1ΦOutput: 460V 3Φ 11kW 475L Input: 240V 3ΦOutput: 460V 3Φ 11kW
$7,900.00 - $9,500.00
Block Manifold with 8 - 1/2" FNPT ports
Block Manifold with 8 - 1/2" FNPT ports This Manifold has 8x 1/2" FNPT ports that are commonly used for connecting multiple columns or different tanks to one input of vacuum and/or nitrogen. It has six ports on top and one on each end. The manifold has two 5/16 holes that can be used to easily mount on one of our extruded aluminum rack systems.
$300.00
Flexible Rubber Foam Pipe Insulation Tee, 1/2" Thick Wall, 1-3/8" ID
Flexible Rubber Foam Pipe Insulation Tee Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint. For Use On Pipe Insulation Type Tee Wall Thickness 1/2" ID 1 3/8" OD 2 3/8" For Pipe Size 1 For Copper Tube Size 1 1/4 Temperature Range -295° to 220° F Heat Flow Rate 0.25 Btu @ 75° F Density 4.5 lbs./cu. ft. Material Buna-N/PVC Foam Color Black Flexibility Flexible Cell Type Closed Tube Style Slit Specifications Met ASTM E84 25/50 for Flame and Smoke, ASTM C534 Performance Properties Moisture Resistant R Value 2 Additional Specifications SDS RoHS RoHS 3 (2015/863/EU) Compliant REACH REACH (EC 1907/2006) (01/17/2022, 223 SVHC) Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 392690.9988 ECCN EAR99
$15.00
Flexible Rubber Foam Pipe Insulation Elbow, 1/2" Thick Wall, 1-3/8" ID
Flexible Rubber Foam Pipe Insulation Elbow Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint. For Use On Pipe Insulation Type Elbow Elbow Bend 90° Wall Thickness 1/2" ID 1 3/8" OD 2 3/8" For Pipe Size 1 For Copper Tube Size 1 1/4 Temperature Range -295° to 220° F Heat Flow Rate 0.25 Btu @ 75° F Density 4.5 lbs./cu. ft. Material Buna-N/PVC Foam Color Black Flexibility Flexible Cell Type Closed Tube Style Slit Specifications Met ASTM E84 25/50 for Flame and Smoke, ASTM C534 Performance Properties Moisture Resistant R Value 2 Additional Specifications SDS RoHS RoHS 3 (2015/863/EU) Compliant REACH REACH (EC 1907/2006) (01/17/2022, 223 SVHC) Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 392690.9988 ECCN EAR99
$11.50
Flexible Rubber Foam Pipe Insulation Tube Slit, 1/2" Thick Wall, 1-7/8" ID, 6 Feet Long
Flexible Rubber Foam Pipe Insulation Tube Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint. Slit tubes have an adhesive strip closure. For Use On Pipe Insulation Type Tube Wall Thickness 1/2" ID 1 7/8" OD 2 7/8" For Pipe Size 1 1/2 Length 6 ft. Temperature Range -295° to 180° F Heat Flow Rate 0.25 Btu @ 75° F Density 4.5 lbs./cu. ft. Material Buna-N/PVC Foam Color Black Closure Type Adhesive Strip Flexibility Flexible Cell Type Closed Tube Style Slit Specifications Met ASTM E84 25/50 for Flame and Smoke, ASTM C534 Performance Properties Moisture Resistant R Value 2 Additional Specifications SDS RoHS RoHS 3 (2015/863/EU) Compliant REACH REACH (EC 1907/2006) (06/10/2022, 224 SVHC) Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 400911.0000 ECCN EAR99
$42.00
12" Tri-Clamp Dewaxer Columns
12" Tri-Clamp/ Tri Clover Dewaxing Columns This is a 12" Tri-Clamp BVV™ Tri-Clamp Dewaxing Spool. It is intended to have dry ice put into the sleeve to chill the material inside the column. **Note: When selecting a Pipe Hanger choose the size that correlates to the Sleeve OD NOT Spool OD Sizes Available: 12" x 12" Tri-Clamp Dewaxer Column Specifications: Tri-Clamp Size 3" Material 304 Stainless Steel Standard 3A High Polish Sleeve OD 14.000" Spool ID 11.732" Spool OD 12" Flange OD 12.57" Bead Center 12.17" Drain Port 1/4"-18 FNPT (Drain Plug Included) OD = Outer Dimension ID = Inner Dimension Disclaimer to Customer: User assumes all responsibility and risks of the system for all Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractors. They DO NOT come with a standard 1 year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.
$305.00$200.00
2L Full Bore Short Path Distillation Turnkey Kit with P2 Distillation Head
2L Full Bore Short Path Distillation Turnkey Kit with P2 Distillation Head This unit carries a 2-day lead time The 2L Full Bore Short Path Distillation Turnkey Kit with P2 Distillation Head is a great setup for smaller scale processors that want a budget friendly system without sacrificing quality on the main components that make a short path great. We understand that as an operator our customers want to be able to start their system and operate in ideal conditions run after run. That is why we paired a full-bore setup with a 14.1CFM pump that will assure the lowest vacuum depth will be pulled every time. Main components such as the distillation head, vacuum valve adapter, and cold trap are all American blown glass. These components allow us to present this system that will repeat in performance time after time. For a in depth analysis of this system please view the following videos. Here you will see the system setup, component explanation, and even see it perform in a first and second distillation pass. These runs were all performed in our lab and the data was used to help fine tune the system. The unit's max internal temperature cannot exceed 380C. The recommended max set temperature should not exceed 250C Video 1 - Setup and Component Explanation Video 2 - Setup Addendum Video 3 - Fist pass Distillation Video 4 - Second Pass Distillation The 2L Full Bore Short Path Distillation Turnkey Kit with P2 Distillation Head Includes: 1 First Pass Distillation Operating Procedure 1 P2 Distillation Kit 1 2L Double Neck Boiling Flask 1 Full Bore Vacuum Valve Adapter 1 BVV MP7H Heater 1 2L Heating Mantle 1 Ribbed Glass Cold Trap 1 Bullseye Precision Vacuum Gauge 1 BVV Pro Series 14.1CFM Rotary Vane Pump (Comes filled with oil. Recommend purchasing additional Ultra 19 Vacuum Pump Oil. SKU: INLAND19-ULTRS-1G) 1 Oil Mist Filter Trap for Rotary Vane Pump 1 24/40 250ml Single Neck Round Bottom Flask 3 24/40 500ml Single Neck Round Bottom Flask 1 24/40 Glass Funnel 1 Vacuum Manifold for Rotary Vane Pump 1 1 Meter Bellow Hose 1 PTFE Magnetic Stirring Bar Retriever 1 24/40 Metal Keck Clip 6 24/40 Plastic Keck Clips 3 250-500ml Cork Stands 2 Chain Clamps 1 Boss Head with 3 Finger Clamp 1 BVV Lab Stand 10 Fiber Glass Insulation Rope 1 Dow Corning High Vacuum Grease 1 10/30 Non-Mercury Glass Thermometers 1 24/40 – 10/30 Glass Adapter Bushing 1 24/40 – 1/8” Thermometer Adapter 1 24/40 Straight Adapter 2 6”x6” Scissor Jack 3 36” Threaded Lab Stand Rod 2 Gl14 – 8mm Barb 6 ¼” Silicone Tubing 2 PTFE Magnetic Stirring Bar 4 Hose Clamp with Butterfly Key ***Note: This entire setup will ship via motor freight.*** ***Note: All units are inspected for broken glass or parts before unit is shipped. If unit arrives damaged or glass is broken (this does not include minor imperfections or scuffs in glassware), Customer MUST contact BVV™ within 3 days of delivery to file a claim and receive a replacement part. If customer DOES NOT contact BVV™ within 3 days of delivery responsibility for replacement parts falls on the customer and they must pay for replacement pieces.*** ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.***
$7,500.00
Duster Valve
This duster valve fits our 14.6 Liter Argon Canister (Sold separately.)
$95.00
J636T Hubbell Process Water Heater 240V 3P with Pump
Hubbell Process Water Heater 240V 3P Process Water Heater 6 Gallon Stainless Steel ASME Vessel 36 kW, 240 volt, 3 phase Complete with electrical operating controls including the following: magnetic contactor, immersion elements, digital temperature controller with safety hi-temperature cut out, low water cut out, and an ASME rated combination temperature and pressure relief valve. Unit is factory assembled, insulated, jacketed, wired, and tested. Unit is ready for electrical and plumbing service connections. This kit includes a stainless steel pump to continuously circulate water through a closed loop system, an expansion chamber may be needed. Professional installation of water lines by a certified plumber is recommended. Water Heater Features Industrial Grade Construction Stainless steel pressure vessel provides maximum service life ASME Section VIII stamped vessel ensures high quality construction Heavy duty construction withstands demanding industrial use Packaged with all electrical operating controls for efficient installation Small reserve capacity lowers peak power demand and reduces operating costs in systems with ON / OFF cyclical demand Hubbell V636T Heater Specs Model J636T Voltage 240V Current Draw (A) 87 Heating Wattage (kW) 36 Storage Capacity (Gal) 6 Inlet / Outlet Connections 3/4" MNPT Circulation Pump Specs Model AHWS-25-60-180 Material Stainless Steel Power 40 W Max Head (Ft.) 18 Max Flow (GPM) 15.8 Max Water Temp (°C) 110 Voltage 220VAC / 1ph Current Draw (A) .2 Max Ambient Temp (°C) 40
$6,600.00
SDA 3A (100% ABV) Lab Grade
Product Description: Ethanol 200 Proof SDA 3A Ethanol 200 Proof SDA 3A is a premium-grade denatured alcohol commonly used across industrial, laboratory, and commercial applications. Formulated with 200 proof ethanol (100% pure ethyl alcohol) and denatured with methanol, SDA 3A is non-consumable while retaining its exceptional solvency and evaporative properties. Key Features: High Purity: 200 proof ethanol ensures maximum concentration and efficacy. Specially Denatured: Denatured with methanol, making it suitable for industrial and laboratory use without beverage tax requirements. Versatile Solvent: Ideal for use in cosmetics, pharmaceuticals, and cleaning formulations, as well as industrial cleaning and manufacturing. Fast Drying: Evaporates quickly and leaves minimal residue, making it excellent for precision cleaning and preparation. Typical Applications: Personal Care Products: Used as a solvent in cosmetics and fragrances. Pharmaceuticals: Key ingredient in antiseptics, sanitizers, and medicinal preparations. Industrial Use: A go-to solvent for cleaning, degreasing, and chemical processing. Laboratory Reagent: Suitable for chromatography, chemical synthesis, and sample preparation. Specifications: Ethyl Alcohol Content: 100% (200 proof) Denaturant: Methanol Chemical Formula: C2H6OH Molecular Weight: 46.07 CAS Registry Number: 64-17-5 Appearance Colorless Liquid Odor: Characteristic Density 0.78-0.8 g/cm3 Boiling Point: 64.7 °cat 1,013 hPa Solubility in water: Completely Soluble GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H225 GHS Precautionary Statements P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 UN Identification Number: 1170 Proper Shipping Name: Ethanol Solutions Transport Hazard Class: 3 Packing Group: II DOT Placard: SDA 3A 200 Proof Tech Grade Safety Data Sheet (SDS) SDA 3A 200 Proof Tech Grade Certificate of Analysis (COA)
$14.00 - $1,890.00
KF-40 Tee
This is a KF-40 Flanged Tee for High Vacuum Applications. The Material is 304SS and it has a maximum vacuum rating of 10^-7 torr @ 72F.
$55.00
Glycerin Compound Compression Gauge - 1/4" Tube Stub
Glycerin Filled Compound Gauge is available with either a 1/4" stainless steel compression connection and features a readout range of -30 to 300 PSI.
$22.00
STIR BARS, MAGNETIC, PTFE, EGG-SHAPED
Egg-shaped magnetic stirring bar provides its own pivot point without separate ring or abrupt change in contour. Designed for use in round bottom vessels, it is shaped to spin freely, unrestricted by the vessel contour. Manufactured with FDA-grade and USP Class VI PTFE. Stir Bar, Magnetic, Egg-shaped, fits 12000mL-22000mL flask, Length x Dia. in inches: 3 x 3/4
$37.30
Buchner Funnel - Fritted 650ML
24/40 Joint
$45.00$20.00
Angled Compression Ball Valve
BVV manually operated two-way ball valves provide quick ¼ turn directional flow control of fluids in instrumentation and process systems. This Valve body has a 90 degree angle to combine the utility of a ball valve and shape of a compression elbow to eliminate extra parts in the system. Features: Directional handle indicates flow direction Panel Mountable 90-degree actuation Straight through flow path Micro-finished ball provides positive seal Free-floating ball design provides compensation for seat wear for repetitive sealing Blow-out proof ball & stem BVV™ Compression Ball Valve - Data Sheet Specifications Body Material 316L Stainless Steel Pressure Rating @ 100F 1000 PSIG Connection Type 1 Double Ferrule Tube Fitting Connection Size 1 Specified by User Connection Type 2 Double Ferrule Tube Fitting Connection Size 2 Specified by User Handle Type Nylon-Stainless Steel Insert Handle Color Black Packing Material PTFE
$130.00 - $200.00
Commercial Vibrating Sifter - 15.50 x 4" (Compare to Custom Cones)
Automatic Vibrating Sifter - Commercial 15.50 x 4" Sifting your plant material is an excellent way to remove stems automatically. This commercial sifting machine was explicitly designed with processors in mind - the stainless steel construction and screens ensure you can easily clean our sifter, and the screen sizes are fine-tuned for the most common sifting needs. The commercial grade sifter offers a larger diameter, coming in at 15.50 inches, compared to the 11.75 inches of the original starter sifter - this means you'll be able to sift more plants in one sitting! Once you've ground your plant material, you only need to pour it into the sifter and switch it on. You can now walk away and wait for your plants to be automatically sifted - no more standing around doing manual sifting. Sifting your biomass will not only ensure no stems make it into your final product but will also ensure nothing else makes it into your product, like large leaves, gravel, or any other foreign matter. Additionally, consistent grinding will make your product burn more evenly and pack more evenly in any cone-filling machine. Plant Material Specific Sifter The commercial sifter was explicitly designed for plant material processors. From its stainless steel construction to multiple screen sizes, our team of Experts is confident this sifter or our other larger sizes will be the perfect addition to your product production process. We offer multiple screen sizes, allowing you to customize the particle size for the plant material in your product. Depending on the strain or weight of the product you are making, you may want to experiment with various screen sizes. Multiple Screen Sizes When it comes to sifting your plant material, you will want to have an ideal particle size for your plant material in mind. If you are still determining what size screen you need, our team of Experts is here to help! Depending on your strain and grinder, your ground biomass will have a different consistency. Additionally, depending on the size of the cone you are using and your desired fill weight, the particle size of your plant material will play a significant role. For example, a smaller particle size will allow you to pack more plant material into a small cone, but a particle size that is too small may lead to a poor, uneven burn. Specifications PURPOSE: Sifting Ground plant materialCONSTRUCTION: Stainless SteelSCREEN DIAMETER: 15.50 inchesMACHINE TYPE: SifterPOWER REQUIREMENT: 120vRATED VOLTAGE: 110VRATED FREQUENCY: 60HzRATED POWER: 50W
$1,000.00
10LB+ EVO Certified Closed Loop Extractor
10LB+ EVO Certified Closed Loop Extractor The 10LB+ EVO Certified Closed Loop Extractor builds upon the proven success of the 5LB EVO, pushing the boundaries of performance, capacity, and innovation. Tailored for extractors scaling up their operations, this system retains the advanced features of its predecessor while offering increased throughput and operational efficiency to meet the demands of larger-scale production. With a rugged design suited for both cured and fresh frozen materials, the 10LB+ EVO supports low-temperature extractions and rapid solvent recovery, leveraging 1.5" full-bore recovery lines to reduce cycle times without compromising on extract quality, safety, or ease of operation. Optimized for a 10-pound extraction process at a 5:1 butane-to-biomass ratio, the system includes dual 55LB jacketed and baffled solvent collection/recovery tanks and an additional jacketed material column for pre-packing. This feature enhances efficiency and ensures seamless processing. With 3X 6"x36" jacketed material columns, each equipped with individual inline CRCs (Color Remediation Columns), the 10LB+ EVO guarantees maximum extraction efficiency, exceptional extract purity, terpene preservation, and unmatched filtration flow rates. Engineered for compliance and reliability, the 10LB+ EVO is peer-reviewed and 3P-certified to meet or exceed Class 1 Division 1, NFPA 58, and ASME standards, incorporating 3A sanitary compression and Tri-Clamp fittings for durability and precision. Capable of processing 80+ pounds of biomass per 8-hour shift, this system delivers the scalability, precision, and affordability extractors need to elevate their production capabilities. Key Features 1.5" Full-Bore Recovery LineAccelerate recovery with oversized 1.5” lines, minimizing cycle times and boosting throughput. Inline and Independent Adsorbent Filtration ColumnsEnsure pristine extract clarity and unadulterated terpene profiles with individual inline CRCs for each material column. Optimized for maximum flow rates and minimal retention time to preserve flavor. Independent Solvent InjectionReduce downtime and streamline operations with independant solvent injection for smooth transitions and increased efficiency. Additional Standby Material ColumnIncrease throughput with an extra pre-packed material column, ready to swap in for non-stop processing. Sanitary Compression and Tri-Clamp FittingsBuilt for reliability, the system’s sanitary compression and Tri-Clamp fittings ensure leak-proof assembly and simplified maintenance. Processing Power Capacity Per Batch: 10LB Cycle Time: 30-45 Minutes* Capacity: 80+lb, per 8-hour shift* Extracts: isolate/sauce, distillate, vape pens, shatter, and wax/sugar *Cycle Time & Capacity vary based on heater and chiller pairing* Specifications 3X 6"x36" 5LB Material Column 3X 6"x6" Adsorbent Filtration Column 3X 1-5um Dutch Weave Sintered disk filter stacks 1.5"X 48" Braided Inline molecular sieve recovery line 10X 1.5" Certified Borosilicate Sight Glasses 5X 250 PSI ASME Safety Valves 5X -30hg-250PSI Compound Pressure Gauges 1.5" Full Bore Recovery Lines 1/2" Compression process Flow lines Footprint (DxWxH) 30"x68"x79" Weight: 650 lb Maximum Pressure Rating: 250PSI Compliance Class 1, Division 1 compliant Designed to ASME standards NFPA 58 LPG compliant 3P Certified
$23,000.00
Synder NFG Membrane (600-800Da MWCO)
Synder NFG Membrane With a pore size ranging between 0.1-10nm,Synder Filtration's nanofiltration membranes enable the passage of water and certain salts through the membrane while effectively retaining multivalent ions, low molecular weight molecules, sugars, proteins, and various organic compounds. A result of extensive research and development, Synder's NFS, NFX, NFW, and NFG nanofiltration membrane products have demonstrated exceptional resistance to fouling, a high level of selectivity, and the physical durability necessary for diverse industrial separation processes. Specifically, NFS, NFX, and NFW exhibit outstanding rejection of MgSO4 and lactose, while NFG is designed to partially remove monosaccharides from oligosaccharides. These nanofiltration membranes, as a whole, have the capacity to significantly reduce levels of hardness, nitrates, sulfates, tannins, turbidity, color, total dissolved solids (TDS), and moderate levels of salt from feed water streams. The proven performance of Synder's nanofiltration membranes makes them well-suited for a broad spectrum of industrial applications including the desolvation of ethanol from botanical extract solutions. BVV utilizes 4X NFS 2540 Membranes inside our Nanofiltration Skid to recovery ethanol at 30 Gallons per hour. Specifications Polymer: Proprietary PA TFC Approx. Molecular Weight Cutoff: 600-800 DA Typical Operating Flux 55-60 GFD Average Lactose Rejection: 60% Average MgSO4 Rejection: 50% Average NaCl Rejection: 10% Maximum Operating Pessure <95F/35C: 600PSI/41.4 Bar Maximum Operating Pressure >95F/35C: 435PSI/30 Bar Maximum Pressure Drop per Element: 15PSI/1.0 Bar Maximum Pressure Drop per hosing: 60PSI/4.1 Bar Maximum continuous Operation Temperature: 122F/50C Maximum CIP Temperature: 104F/40C Maximum Temperature Operating pH Range: 4-9 Ambient Temperature Operating pH Range: 4-10 Maximum Temperature Cleaning pH Range: 3-10 Ambient Temperature Cleaning pH Range: 3-10.5
$577.50 - $1,277.50
3000mL Single Neck RBF, 35/25 Socket Joint
3000mL Single Neck RBF, 35/25 Socket Joint Round bottom, HEAVY WALL single short neck flask with a spherical socket joint. Flasks having a 35/20 socket joint are used as replacements for the collection flask on rotary evaporators.
$249.00
1000mL Single Neck RBF, 35/25 Socket Joint
1000mL Single Neck RBF, 35/25 Socket Joint Round bottom, HEAVY WALL single short neck flask with a spherical socket joint. Flasks having a 35/20 socket joint are used as replacements for the collection flask on rotary evaporators.
$79.00
36" Buchner Filtration Kit
Buchner Filtration Kit This filtration kit is operated by using a vacuum pump to pull the solution through the filter paper to remove particulate. The funnel has a 36" perforated plate to support the filter paper. The 150 liter collection vessel has multiple sight glass ports so that you can easily view inside the vessel as well as hold up a flashlight if needed. The standard lid includes a pressure gauge, KF-25 vacuum port, and a valve to release vacuum pressure or add positive pressure to the vessel. The vessel has a surrounding jacket that can be used to heat or cool the solution within the main vessel, it can even be outfitted with a mixer and recovery system if desired! To build your custom setup, talk to our experienced team of account representatives. This kit includes: 36" Filtration Funnel 150L Jacketed Reactor 1.5" Butyl hose Diaphragm vacuum pump (optional)
$9,500.00
Chromatography Column
Chromatography Column Chromatography Column This 3”x24” chromatography column features an internal volume of 2.7L. It’s commonly used for removing pesticides, separating components, and cleaning different chemical compounds. Additional consumables or accessories will be needed depending on the application. Capacity can be increased with an additional reservoir adapted to the top 45/50 Rodaviss joint. Rodaviss joints are great for disconnecting any stubborn joints. Light grease is still recommended when assembling joints. Light grease is still recommended when assembling joints. Features: Needle control valve 3”x24” column with 2.7L capacity 45/50 Rodaviss joint Sintered disk Stop cock For additional information or questions regarding this kit, accessories, and consumables contact our customer support line. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$350.00
XL 1-Micron Refinement Filter
XL 1-Micron Refinement Filter Filter large volumes of solutions with ease with our XL 1-micron Refinement filter. complete with our 1-micron Dutch Weave sintered disk these refinement filters provide complete retentionof the filter paper making it impossible for suspended particles to bypass the filter paper. Made from the highest quality 304 stainless steel parts this XL Refinement Filter is built to last making it a great alternative to polypropylene filter trolleys. Processing Power Funnel Capacity: 44.48 Liters/11.75 Gallons Collection Capacity: 100 Liters/26.41 Gallons Specifications 12"x24" Funnel Body 12" 1um Dutch Weave Sintered Disk 12" Hemispherical Ring stand 1/2" " JIC Drain Valve 100 Liter Stainless Steel Carboy Collection Base -30Hg Vacuum Gauge 1/2" JIC Vacuum Valve 3/8" JIC Diptube Valve 1/4" JIC Butterfly Accessory Valve 350MM Ashless Filter Paper Silicone Gaskets
$2,750.00
Caster Wheels for Reactors
Heavy duty replacement wheels to be used on 50L, 150L, and 300L BVV Stainless Steel Reactors.
$30.00
4" Tri-Clamp U-Bend with 2" Side Port
This 4" Tri-Clamp U-Bend is 14" in length from center to center of the 4" ports. There is a 2" port in the middle that is useful to mount sensors, gauges, or sight glasses. The material of this part is 304 Stainless steel.
$275.00
Part A 2" Stubby Metric Cam Lock Adaptor
Part A 2" Stubby Metric Cam Lock Adaptor This adapter converts 2" (50mm) male buttress pipe threads to a 2" male camlock. The adapter incorporates female buttress threads on one end and a male Camlock (also known as a quick-disconnect or QD) on the other for connecting pipes and valves with different ends. Made of tough polypropylene (PP), this adapter also incorporates an ethylene propylene diene monomer (EPDM) gasket for a leak-tight connection. Shallow profile ensures valve does not protrude past IBC tote cage. Key benefits: Converts 2" male buttress pipe thread to a 2" male quick-disconnect 2" long profile does not protrude past IBC cage during transport Combo camlock/NPT end allows use of a shallow NPT cap Made of PP EPDM gasket ensures a secure seal Suitable for use in a wide variety of liquid handling applications Proudly Made in the USA Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Disclaimer: This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. Material PP Dimensions 2.4" Dia. x 1.02" H Weight 0.1 lbs. Case Pack 200 ea. Case Dimensions 15" L x 15" W x 16" H Case Weight 20 lbs. Pallet Pack 4,800 ea. (24 Cases) Pallet Dimensions 40" L x 48" W x 60" H Pallet Weight 480 lbs. Country of Manufacture United States Gasket EPDM Rubber Gasket
$14.00
2" Stubby Buttress to NPT Adaptor
2" Stubby Buttress to NPT Adaptor This adapter converts 2" (50mm) male buttress pipe threads to 2" male NPT pipe threads. The adapter incorporates female buttress threads on one end and male NPT threads on the other for connecting pipes and valves with different ends. Made of tough polypropylene (PP), this adapter also incorporates an ethylene propylene diene monomer (EPDM) gasket for a leak-tight connection. Shallow profile ensures valve does not protrude past IBC tote cage. Key benefits: Converts 2" male buttress pipe thread to a 2" male NPT pipe thread 2" long profile does not protrude past IBC cage during transport Made of PP EPDM gasket ensures a secure seal Suitable for use in a wide variety of liquid handling applications Proudly Made in the USA Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Disclaimer: This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. Material PP Dimensions 2.4" Dia. x 1.02" H Weight 0.135 lbs. Case Pack 200 ea. Case Dimensions 15" L x 15" W x 16" H Case Weight 27 lbs. Pallet Pack 4,800 ea. (24 Cases) Pallet Dimensions 40" L x 48" W x 60" H Pallet Weight 648 lbs. Country of Manufacture United States Gasket EPDM Rubber Gasket Note: Color may vary.
$12.00
BVV M24 - 1/2" MNPT Huber Adapter
BVV M24 - 1/2" MNPT Huber Adapter This zinc plated adapter is meant to be used on Huber Unistats with male M24 threads to adapt to 1/2" MNPT. These fittings must be used in conjunction with M24 Bonded seal washers to create a complete seal. Bonded Seal Specifications For Thread Type Metric For Gender Male For Thread Size M24 Washer Material Steel Gasket Material Buna-N Rubber Temperature Range -20° to 230° F Thickness 2mm RoHS RoHS 3 (2015/863/EU) compliant with exemption 6(a)-I - Lead as an alloying element in steel
$285.00
Compressor Head BARE for BVV Recovery Pump/ CMEP Retrofit
This is a replacement compressor head for the BVV2CYL, BVV4CYL, and BVVCMEP-RETRO. It is a full stainless steel head and has all the proper holes drilled to fit on our recovery pumps.
$35.00$23.00
BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid
BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid This End Cap comes with (4) Compression connections and (2) 1.5" and (1) Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid. They allow the user to adapt and connect a tube stub connection to the (1) 1/4", (2) 3/8", and (1) 1/2" port on a Tri-Clamp lid and the Tri-Clamp Connections. These 7 connections are welded on a 10" Hemispherical Tri-Clamp End Cap. Specifications Material: 304 Stainless Steel Connection Types: (2) 2" and (1) 1.5" Tri-Clamp with 3" Tube Extension Below Lid on Center Tri-Clamp Port 10" Tri-Clamp (1)1/4", (2) 3/8" and (1)1/2" Female Compression Connections Standard: 3A
$320.00
BVV Replacement Centrifuge EX Motors
BVV replacement centrifuge EX motors for BVV 45L and 475L centrifuges.
$750.00 - $1,750.00
NRE 5L Main Condenser
NRE 5L Main Condenser This condenser directly connects to our 5L Neocision ETL Lab Certified Rotary Evaporator (SKU: NRE-5L). NOTE: Condenser does not come with GL caps and barbs or gaskets. Specifications Connection Type and Size To Bump Trap Flange ID32/OD50 (mm) To Collection Flask Flange ID22/OD37.5 (mm) Condenser Input/Output GL14 Vacuum GL14
$420.00
PTFE WFE Wipers - 3 Pack
PTFE WFE Wipers These wipers are designed for wiped film evaporators spinning counterclockwise. Pack of 3 Dimensions: 15.375L x .38W x .42D
$350.00
6" Spool with 4" Tapered Funnel and KF40 Vac Port
This Tri clamp adapter piece can allow you to hook up a vacuum line to a tri clamp column and shielding the vacuum line from and falling liquids or oils. These are commonly used in falling film recovery applications.
$212.00
Throttle Valves for Pneumatic Presses
Throttle Valves for Pneumatic Presses Throttle Valve used to control the speed of your pneumatic press. Replace the fitting on the output side of your regulator. Thread Size: 1/2" NPT, Quick Connect Air Hose Size: 12mm
$20.00
1.5 Gallon Tall Stainless Steel SIDEMOUNT - POT ONLY
1.5 Gallon Tall Stainless Steel SIDEMOUNT - POT ONLY ***Note: 'with Hardware' Option only includes the side-mount manifold with gauge pre-installed. (Does Not Include Lid or Gasket) This is a replacement part for the following Vacuum Chambers: Glass Vac 1.5 Gallon Tall Stainless Steel Vacuum Chamber Dimensions: 8-5/8"" Tall x 7-1/8"" Diameter Hole Size: 21/64 Material: 304 - 2B Stainless Steel
$52.00 - $70.00
Mercury 99.99995%
Our mercury is virgin quadruple distilled. Its purity is 99.99995%. This product ships as Hazardous material in any quantity, even small vial is required to ship as a regulated hazardous material and carries all the additional handling fees associated. ACS Grade MCT Grade (crystal growth) Dental Grade Reagent Grade Instrument Grade Made in USA Product Shipping and packaging detail. 1lb size ships in a 2oz HDPE bottle 5LB size ships in a 8oz bottle not entirely filled 10lb ships as 2x 5oz bottles.
$0.00 - $1,380.00
Sodium Metabisulfite
Sodium metabisulfite has many major and niche uses. It is widely used for preserving food and beverages.
$16.00 - $61.00
Neocision Spectra Veg 500W LED Grow Light
Neocision Veg 500 LED Grow Light Neocision Veg 500 LED grow light fixtures are designed for commercial growers seeking enhanced yield and canopy coverage as compared to 600W metal halide or 630W ceramic metal halide lights. Increasing PPFD can help you accelerate growth for your mother plants before and after you take cuttings. Features: Tested efficacy of 2.62 μmols/J at 240 VAC Industry Leading Horticulture LEDs RJ Port for Plug and Play Control Systems Folding Design for Fast and Easy Installation 5 Year Limited Warranty
$228.00
Neocision Elite 750W LED Grow Light
Neocision Elite 750 LED Grow Light Neocision Elite 750 led grow light fixtures feature a 21% blue spectra and 44% red spectra with a peak at 660nm for your flowering plants. This unique spectra mix creates stronger plants for nutrient uptake with maximized red for increased photosynthesis. Ideal for hanging over benches. Features: PPE 2.88 Micromoles / J 2146 PPF per Fixture Industry Leading Horticulture LEDs RJ Port for Plug and Play Control Systems Folding Design for Fast and Easy Installation 7 Year Limited Warranty
$452.00
2 Lowtemp V2 Press Medusa System - PA1500 BVA Air Pump - NEW Open Box
2 Lowtemp V2 Press Medusa System - PA1500 BVA Air Pump - Open Box Description The Medusa system from Lowtemp Industries gives the ability to link up to FIVE 4x7 Lowtemp Presses together for a single operator! Press an easy 500g of sift or 300g of flower per squish with five linked presses. Scale anywhere from 2-5 presses as your needs require! This system keeps the small batch quality that the Lowtemp V2 system is known for, but is perfect for scaling up production to almost any level. Pump Options Explained P1000 Premium Hand Pump- Available up to 3 presses. This option is great for those looking for the delicate precision our hand pumps are known for while still having massive processing power. PA1500 Air Pump- Available up to 4 presses. The air pump option is fantastic for people looking for automation. Since the PA1500 moves a lot of oil pretty quickly, we don't recommend using it for bubble flower pressing under 2-3 presses. However, when split across multiple presses, it's actually really great for bubble Flower pressing and becomes very easy to press Flower with. We recommend at least a 30 gallon air compressor with 110-175 psi. Bigger is better in regards to your air compressor in this case. PE102 Electric Pump- Available up to 4 presses. The electric option is also automated, and pressure is applied with the flick of a switch. Again, we do not recommend using 1 or 2 presses on Flower or other concentrates since the flow rate is relatively high (quick pressure application), unless you have a lot of experience pressing. Using proper bagging techniques makes it entirely possible. No air compressor is needed, only a 110v plug! Super simple and very quiet. Number of Presses Explained Manifolds come in 2 port, 4 port, and 5 port. Every port comes with a quick connect already attached, which makes the ability to disconnect and add more presses in the future as easy as threading a quick connect! Please keep in mind, due to high pressure fluid dynamics, multiple presses may not close at the exact same time, however they will not start to apply any considerable amount of force until all the presses have caught up to each other. Individual Press Specs The last press you buy: Period. We designed this press with your space and portability constraints in mind. All the while, creating a system that will last you a lifetime. We kept the pressure options entirely open source so you can select the press style that works for you. For more budget friendly options, a simple $40 bottle jack can be used. If you want the best of the best, we carry High End BVA and SPX Hydraulics which come assembled, bled, and tested with pressure gauges installed. Our unique modular design makes any possible electronic warranty work extremely cheap to ship for fulfilment. Our competitors make you ship an entire press in for a simple electronic component failure or loose wire which can cost you hundreds in shipping fees. The Lowtemp V2 is the final solution to any large scale solventless lab. One operator can use up to 5 presses at once via a single pump. Specs Sturdy and Ultra Compact design. 10" tall, 10" long, 6" wide 58 lbs Complete Modular design Food Grade Anodized and insulated 4"x7" plates Powder coated steel Made in Denver, Colorado with Certified American alloys Lifetime Warranty on the press 1 year full warranty on the electronics Universal force options up to 20 tons Horizontal pressing capabilities
$3,961.30$2,800.00
2-1/2" Oil Filled Vacuum Pressure Gauge - Stainless Steel Case, Brass, 1/4" NPT, Center Back Mount Connection -30HG/30PSI
2-1/2" Oil Filled Vacuum Pressure Gauge - Stainless Steel Case, Brass, 1/4" NPT, Center Back Mount Connection -30HG/30PSI 2-1/2" Liquid Filled Pressure Gauges - Stainless Steel Case, Brass, 1/4" NPT, Center Back Mount Connection Dial Size: 1-1/2", 2", 2-1/2" or 4" Dial Sizes (Crimped Casing)Accuracy: +/- 3/2/3%Scale: Dual Scale - PSI/BarMovement: Copper Alloy*Bourdon Tube: Copper Alloy*Window: Poly CarbonateCase: Stainless Steel case for protection in harsh environmentsConnection: Copper Alloy Center Back Mount*; 1/8” NPT for 1-1/2” dial, 1/4” NPT for 2 and 2-1/2” dials, and 1/4" NPT, 3/8" NPT, or 1/2” NPT for 4” dialsNormal Ambient Temp: -4°F to 140°F (-20°C to 60°C)Liquid Filling: Glycerin oil filled to enhance reliability and integrity; helps dampen the effect of vibration and pulsation; lubricates the movement and extends the life of the gauge. 2-1/2" Liquid Filled Vacuum Pressure Gauge - Stainless Steel Case, Brass, 1/4" NPT, Center Back Mount Connection, -30HG/30PSI
$12.00
1/2 in. Tube Fitting x 1/4-18 MNPT, 316 SS
Body Material 316 SS Connection 1 - Type Tube Fitting Connection 1 - Size 1/2 in Connection 2 - Type Male National Pipe Thread Connection 2 - Size 1/4-18 Brand Series Duolok Shape Elbow End Connections TF x MNPT Production Category 1 End Connection Type Duolok Tube End by Male National Pipe Thread
$25.00$15.00
Union Tee, 1/2 Tube Fitting x 1/2 Tube Fitting x 1/2 Tube Fitting, 316 SS
Body Material 316 SS Connection 1 - Type Tube Fitting Connection 1 - Size 1/2 in Connection 2 - Type Tube Fitting Connection 2 - Size 1/2 in Connection 3 - Type Tube Fitting Connection 3 - Size 1/2 in Brand Series Duolok Shape Tee End Connections TF x TF x TF Production Category 1 End Connection Type Duolok Tube End
$60.00$25.00
Female Elbow, 3/8-18 FNPT x 3/8-18 FNPT, 316 SS
Body Material 316 SS Connection 1 - Type Female National Pipe Thread Connection 1 - Size 3/8-18 Connection 2 - Type Female National Pipe Thread Connection 2 - Size 3/8-18 Brand Series TruFit Shape Elbow End Connections FNPT x FNPT Production Category 4 End Connection Type Female National Pipe Thready by Female National Pipe Thread
$20.00$8.00
You have seen 1056 out of 1090 products