All products
Active Aqua Straight Connector, pack of 10
10 pieces per pack
$3.81
Autopilot - Cooling Thermostat
The Autopilot Cooling Thermostat is a compact and easy-to-use controller for air conditioners and exhaust fans. Simply plug it into a power receptacle and then plug your cooling device into its outlet, then choose your preferred room temperature setpoint with the rotary knob. When its built-in sensor senses that the room temperature has exceeded the setpoint by at least 1°F, it will automatically activate your cooling device by powering the outlet. Digital screen displays current room temperature. Its green LED light illuminates when the outlet is activated to on. When the temperature in the room has dropped at least 1°F, the Autopilot Cooling Thermostat will cut power to the cooling device. It has a built-in 1-degree deadband and is ETL-listed. Max power handling 15A. Features: Easy to use analog control Maintains desired room temperature Controls air conditioner or exhaust fan Temperature control range: 40 - 95°F Digital display shows current room temperature
$50.59$40.87
LightRail - 5.0 Add-A-Bar Kit
The Light Rail 5 Add-A-Bar kit allows for an additional (3) light maximum expansion to existing Light Rail 5 complete systems. Add-A-Bar kits may need an additional 4' Auxiliary rail (LR5AUXRAIL) for systems that demand more than 2 total crossbar setups. Kit Contains: Adjustable Crossbar (81", 87", 93") Light Rail 5 Auxiliary Trolley Sectioned Push-Pull Rod Mounting Hardware Instructions
$234.99$187.57
LightRail - 3.5 IntelliDrive 10 RPM Kit
For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 3.5 Intelli-Drive is without question the finest linear lamp mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail works great with all reflectors! Light Rail 3.5 is rated to 35 lbs Light Rail 5.0 is rated to 100 lbs
$395.99$268.36
Coast of Maine Stonington Blend Organic Growers Mix, 1.5 cu ft
Best Soil for Growing Potted & Container Plants Stonington Blend™ Organic Grower’s Mix is an OMRI listed, complex “Super Soil” designed for high performance growing in containers and large pots. It is for all growers who want a rich, seedling-to-harvest mix. Packed with nutrients from ocean-based bi-products, and formulated with amendments known to boost budding, blooming, and root development, this perfectly balanced mix can sustain a plant for a full growing season and give you tremendous results without any additional nutrients added! Made with: mycorrhizal fungi, lobster compost, worm castings, perlite, dehydrated hen manure, coco fiber (coir), lime, and a mixture of meals (kelp, alfalfa, and fishbone.) Just add water – This soil has everything already in it! OMRI Listed for Organic Use Designed for high-performance Potted & container plants Formulated from organic ingredients to provide an ideal balance between water retention, soil texture, drainage, and aeration in a consistent growing medium such as: mycorrhizal fungi, kelp, fishbone meal, alfalfa meal, worm castings, peat, and coir Helps develop strong roots Grows healthy vegetation, big blooms, and buds
$48.95$34.32
Glas-Col Thermocouple Type "J" Mini Plug
Glas-Col Thermocouple Type "J" Mini Plug D x L : 1/4" x 4" Lead Length: 72"
$70.00
Glas-Col Vapor Monitor
Glas-Col Vapor Monitor motor vapor temperature or other processes audible alarm - high, low, t/c break digital display Specifications TC Type "J" MUST BE ORDERED SEPARATELY Range 0 - 999 C Dimensions 4" W x 4" D x 4" H Volts 120 Includes: 6' attached power cord and grid support bracket
$280.00
Flexible Rubber Foam Pipe Insulation Elbow, 1/2" Thick Wall, 1-3/8" ID
Flexible Rubber Foam Pipe Insulation Elbow Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint. For Use On Pipe Insulation Type Elbow Elbow Bend 90° Wall Thickness 1/2" ID 1 3/8" OD 2 3/8" For Pipe Size 1 For Copper Tube Size 1 1/4 Temperature Range -295° to 220° F Heat Flow Rate 0.25 Btu @ 75° F Density 4.5 lbs./cu. ft. Material Buna-N/PVC Foam Color Black Flexibility Flexible Cell Type Closed Tube Style Slit Specifications Met ASTM E84 25/50 for Flame and Smoke, ASTM C534 Performance Properties Moisture Resistant R Value 2 Additional Specifications SDS RoHS RoHS 3 (2015/863/EU) Compliant REACH REACH (EC 1907/2006) (01/17/2022, 223 SVHC) Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 392690.9988 ECCN EAR99
$11.50
Flexible Rubber Foam Pipe Insulation Tube Slit, 1/2" Thick Wall, 1-7/8" ID, 6 Feet Long
Flexible Rubber Foam Pipe Insulation Tube Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint. Slit tubes have an adhesive strip closure. For Use On Pipe Insulation Type Tube Wall Thickness 1/2" ID 1 7/8" OD 2 7/8" For Pipe Size 1 1/2 Length 6 ft. Temperature Range -295° to 180° F Heat Flow Rate 0.25 Btu @ 75° F Density 4.5 lbs./cu. ft. Material Buna-N/PVC Foam Color Black Closure Type Adhesive Strip Flexibility Flexible Cell Type Closed Tube Style Slit Specifications Met ASTM E84 25/50 for Flame and Smoke, ASTM C534 Performance Properties Moisture Resistant R Value 2 Additional Specifications SDS RoHS RoHS 3 (2015/863/EU) Compliant REACH REACH (EC 1907/2006) (06/10/2022, 224 SVHC) Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 400911.0000 ECCN EAR99
$42.00
5L Rotary Evaporator 2L Evaporating Flask (2L Flask that is swap able with the RT5L-V2)
This 2L evaporating flask is made out of borosilicate and designed to fit BVV 5L rotary evaporators. Overall length is about 10-3/4".
$105.00
GL-18 Cap with Aperture, High Temperature
GL-18 Cap with Aperture, High Temperature Open top cap for use with GL screw threads. The cap combined with the CG-197 sealing ring will accommodate tubing of the listed diameter. Cap is made from PPS (polyphenylsiloxan) and will withstand temperatures up to 250°C.
$8.00
Kuritech 3/4 ID PVC Reinforced Braided Hose
Kuritech 3/4 ID PVC Reinforced Braided Hose 3/4" Flexible hose that is ideal for heat transfer applications utilizing mixtures of water and propylene glycol. Specifications: Max Pressure: 150 PSI @ 20° Working Temperature: -4°C - 65°C
$12.50 - $250.00
30L ECO Rotary Evaporator Nut and Washer Flask Set
30L ECO Rotary Evaporator Nut and Washer Flask Set This nut and washer set will fit 30L BVV ECO rotary evaporators produced before 2019.
$65.00
ECO Replacement 50L Main Condenser (V1)
ECO Replacement 50L Main Condenser (V1) Replacement main condenser for ECO rotary evaporators made before 2019. 60/80 Lower Flange 40/60 Top Flange 1/2" Barb connections for cooling coil
$895.00
Caffeine Powder USP/FCC/Food Grade 99.8% Pure
99.8% Pure Caffeine Powder USP/FCC/Food Grade Our Caffeine Powder has a nice fine consistency. Similar to powdered sugar. It is an anhydrous product so it's free of any water/moisture. Chemical Formula: C8H10N4O2 Molecular Weight: 194.19 g/mol CAS Registry Number: 58-8-2 Appearance White Powdery Crystalline Odor: None Density 1.23 g/cm3 @ 20 °C Boiling Point: 178C/352F Solubility in water: Moderately Soluble GHS Pictograms: Irritant GHS Signal Word: Warning GHS Hazard Statements: H302 GHS Precautionary Statements P264, P270, P301+P317, P330, P501 What is Caffeine? Caffeine is a natural stimulant most commonly found in coffee, tea, and certain plants like cacao. It works by stimulating the brain and central nervous system, helping to reduce fatigue and enhance alertness and focus. Chemically classified as a psychoactive drug, caffeine blocks the action of adenosine, a neurotransmitter that promotes relaxation and sleepiness. In addition to its natural sources, caffeine is also added to many soft drinks, energy drinks, and over-the-counter medications. As the world's most widely consumed psychoactive substance, moderate consumption of caffeine has been linked to various health benefits, including improved cognitive function and mood. However, excessive intake can lead to side effects such as insomnia, jitteriness, and increased heart rate. How Much Caffeine is found in coffee, tea, soda, & etc? Coffee drinks Size in oz. (mL) Caffeine (mg) Brewed 8 (237) 96 Brewed, decaf 8 (237) 2 Espresso 1 (30) 64 Espresso, decaf 1 (30) 0 Instant 8 (237) 62 Instant, decaf 8 (237) 2 Teas Size in oz. (mL) Caffeine (mg) Brewed black 8 (237) 47 Brewed black, decaf 8 (237) 2 Brewed green 8 (237) 28 Ready-to-drink, bottled 8 (237) 19 Sodas Size in oz. (mL) Caffeine (mg) Citrus (most brands) 8 (237) 0 Cola 8 (237) 22 Root beer (most brands) 8 (237) 0 Energy drinks Size in oz. (mL) Caffeine (mg) Energy drink 8 (237) 71.9 Energy shot 2 (60) 215 How Much Caffeine should I take? The recommended dosage of caffeine varies based on individual tolerance, age, and health factors. For most healthy adults, a moderate daily intake of 100-200 mg of caffeine is considered safe. This equates to about 1-2 cups of brewed coffee or 2-3 cups of tea. Consuming caffeine in moderate amounts can enhance alertness, boost mood, and improve focus. However, exceeding 200 mg per day may lead to side effects like restlessness, insomnia, rapid heart rate, and headaches. For sensitive individuals or those with certain health conditions, even lower doses can cause adverse effects. It’s important to monitor caffeine intake from all sources, including coffee, tea, energy drinks, and supplements, to ensure safe consumption levels.
$60.00 - $875.00
Mastercool Blue 60" HVAC Hose
This HVAC hose will fit 1/4" SAE or JIC fittings. One end of the hose has a fitting made to depress a Schrader valve within the male fitting, the other end of the hose is a standard connection.
$15.00
CGA 326 Nitrous Oxide Tank Regulator
This tank regulator will control the rate of fluid or gas flow using a butterfly valve. Our BVV butterfly valve is rated to 1000 psi, and is made of 304 stainless steel and features a PTFE valve seat making it compatible with N2O. The output will connect to a 1/4" barb for tubing. (seen here BVV 1/4" Tubing).
$88.48
BVVC750 Centrifuge
BVV C750 Centrifuge The BVV C750 Centrifuge is a large-capacity desktop centrifuge with broad functionality suitable for various applications. The BVV C750 Centrifuge can be used to separate or concentrate samples by density or utilized to separate solid constituents from liquid constituents. The BVV C750 Centrifuge has a maximum speed of 4000rpm with a maximum centrifugal force is 3354xg which allows for fast separation times. It's user friendly simple to use touch screen interface allows for easy operation even when wearing gloves. With built-in cooling fans, the BVV C750 ensures sample preservation while allowing for heat-assisted separations. While the BVV C750 is not actively heated or refrigerated it typically operates at 130F/54C allowing for quick and efficient separations. For Solid & liquid separations we recommend utilizing our 25 Micron Large Rosin Bags, The BVV C750 comes with 3 sets of centrifuge baskets including: 4X 750ML Stainless Steel Separators (300 Gram Capacity 1,200 Grams Total) 4X 5X 50ML Centrifuge Tube Plastic Inserts (20X 50ML Centrifuge Tube Capacity) *Centrifuge tubes not included* 4X 750ML Polypropylene Bottles 10X Large Rosin Bags 25 Mircron Features •Digital LCD display with a user-friendly interface for easy operation. •Microprocessor control, DC brushless motor with low noise and high accuracy. •Dual locking design with lock alarm on the interface. •Centrifuge chamber is made of 304 stainless steel to avoid corrosion. •Can switch RPM/RCF during operation. •Store up to 10 preset programs •Sound and indicator alarm for defaults. •Protection including door closing, malfunction, over-speed, over-heating, imbalance,etc. •Speed is adjustable to avoid sample suspension to ensure the performance. Technical Specifications Model BVVC750 Max Capacity 4*750mL Max Speed 4000rpm Max RCF 3354Xg Speed Accuracy ±10r/min Time Setting 0-99min59s Soft Brake 9 Ramps Noise ≤65dB(A) Power Supply 110V 60HZ Power Consumption 1000W Net Weight 114lb/52kg Packing Size 24"x19"x*14"
$5,000.00
3/8" Fractional Tube Fitting Hose
3/8" Fractional Tube Fitting Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications. They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have a tube stub on each end that fits a standard compression fitting. ***Note: Do not exceed the specified hose bend radius or the inner PTFE liner will kink and the hose integrity will become compromised and should not be used. Specifications: Connection Type(s): 3/8" Tube Stub Liner Material PTFE (Teflon) Braid Material 304 Stainless Steel Swivel Material 304 Stainless Steel Temperature Rating -94°F to 500°F (-70°C - 260°C) Pressure Rating 1500 PSI Chemical Resistance Excellent Max Bend Radius 4"
$51.00 - $106.00
Exhaust Silencer Filter For Edwards NXDS Series Vacuum Pumps
Exhaust Silencer Filter For Edwards NXDS Series Vacuum Pumps Edwards vacuum exhaust silencer for nXDS series vacuum pumps, including nXDS6i(C), nXDS10i(C), nXDS15i(C) and nXDS20i(C) dry scroll pumps when they are not connected to a house exhaust system. These silencers also offer exhaust filtration. Features Compact design combines both filtration efficiency and noise reduction Integrated inlet diffuser optimizes sound attenuation Multi-stage noise reducing features including final stage sound absorbent insert Tubular silencing design - tube is positions to maximize attenuation and air flow while minimizing pressure drop Patented high grade element with built-in butterfly gasket seal which creates positive seal between housing hemispheres and a new seal with each element Seamless drawn housings - no welds to rust or vibrate apart Durable carbon steel construction with black powder coated finish Ability to mount vertically or horizontally Applications Dry Scroll, Piston, Vane and Venturi Vacuum Pumps Prevent tip seal dust and debris from contaminating the environment Silence irritating pump exhaust noise
$456.00
SCILOGEX SCI380HS-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plate, 110V, 50/60Hz US Plug
SCILOGEX SCI380HS-Pro 5.5 x 5.5 in. LCD Digital Magnetic Hotplate Stirrer 380ºC/1500rpm Max Product Description The new SCI380HS-Pro hotplate-stirrer is a very economically priced LCD digital hotplate-stirrer ideal for temperatures below 380°C. This compact unit can be used as a hotplate, stirrer or combination. SCILOGEX 380°C magnetic hotplate stirrers include all leading safety standards and is chemically resistant with white ceramic work plate. They can be used in physical, chemical, analytical and biological laboratories. Product Features Heat only, stir only or heat and stir together functions. Digital temperature control with max. temperature at 380°C Digital speed control with max. speed up to 1500rpm High resolution LCD displays actual temperature and speed. Brushless DC motor is maintenance free. Ceramic plate for chemical resistance and easy clean Aluminum cover with ceramic work plate, allows for immediate heat transfer. Electronic speed control for constant speed even during changes in load External temperature control is possible with temperature sensor PT1000. Hot warning sign if temperature is above 50°C. Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar. Max. stirring quantity of H2O at 5L. cTUVus approved for UL and CSA 2 Year Warranty Work plate dimension 140x140mm Work plate material Aluminum cover with ceramic coating Motor type Brushless DC motor Motor input power 2.4W Motor output power 1.8W Power 510W Heating output 500W Voltage 100-120V 60Hz Stirring positions 1 Max. stirring quantity 5L Max. magnetic bar[length] 50mm Speed range 20-1500rpm Speed display LCD Temperature display LCD Heating temperature range Room Temp.+5°C. - 380°C Overheat protection 420°C Temperature control accuracy ±1°C External temperature sensor PT1000 (accuracy ±0.5°C) Control accuracy of sensor ±20rpm Protection class IP21 Dimension[WxDxH] 320x180×108mm Weight 2.2kg Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI380HS Hotplate& Stirrer manual Hotplates & Stirrers Brochure Hotplate & Stirrers Accessories
$356.00 - $403.00
SCILOGEX SCI6-Pro LCD Digital 5.5 x 5.5 in. Magnetic Stirrer, ceramic plate, 110-240V, 50/60Hz US Plug
SCILOGEX SCI6-Pro 5.5 x 5.5 in. LCD Digital Magnetic Stirrer, 200-1500rpm SCILOGEX SCI6-Pro 5.5 x 5.5 in. LCD Digital Magnetic Stirrer, 110-240V, 50/60 Hz. SCILOGEX SCIS6-Pro 5.5 x 5.5 in. LCD Digital Magnetic Stirrer Features: Easy to read backlit LCD display, with independent heat and stir display Ceramic plate for chemical resistance and easy clean Brushless DC motor is maintenance free Aluminum cover with ceramic work plate, allows for immediate heat transfer External temperature control is possible with temperature sensor PT1000 Electronic speed control for constant speed even during changes in load Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar Max. stirring quantity of H2O at 5L Digital speed control with max. speed up to 1500rpm cTUVus approved for UL and CSA 2 Year Warranty The new MS6-Pro magnetic stirrer is a very economically priced LCD digital stirrer. Digital Magnetic Stirrer Specifications: Work plate dimensions (WXD) 140x140mm Work plate material Aluminum cover with ceramic coating Motor type Brushless DC motor Motor input power 2.4W Motor output power 1.8W Power 10W Voltage 100-240V, 50/60Hz Stirring positions 1 Max. stirring quantity[H2O] 5L Max. magnetic bar[length] 50mm Speed range 200-1500rpm Speed display LCD Protection class IP21 Dimension[WxDxH] 320x180×108mm Weight 2.2kg Permissible ambient temperature and humidity 5-40°C, 80%RH Control accuracy of sensor ±20rpm Additional Resources and Information Downloadable PDFs SCILOGEX Hotplate-Stirrers brochure SCILOGEX SCI6-Pro manual
$259.00
BVV-100 3.5CFM Dry Floating Scroll Vacuum Pump
BVV-100 3.5CFM Dry Floating Scroll Vacuum Pump Introducing the BVV-E2-100 Vacuum Pump, equipped with cutting-edge patented floating scroll technology for unparalleled performance. This pump boasts a 3.5CFM (100 L/min) pump speed and an ultimate pressure of 25 Microns (≤ 0.03 mbar), making it a powerhouse in creating and maintaining vacuums. The 100% oil-free design ensures clean and efficient operation, while the brushless DC motor, with 350W motor power and 200W installed power, provides reliability and longevity. With a compact size ideal for portable equipment, this vacuum pump offers unlimited vapor tolerance and a noise level as low as 55 dB(A) with its case. The BVV-E2-100 is maintenance-free, featuring a robust build with inlet/outlet connections in KF-25, air-cooled cooling system, and a wide ambient temperature range from -40ºC to 50ºC. Elevate your vacuum processes with this advanced, compact, and powerful solution. Specifications Model BVV-E2-100 Pump Speed 100 L/min Ultimate Pressure ≤ 0.03 mbar (3Pa) Motor Power 350 W Installed Power 200 W Motor Type Brushless DC Motor DC Voltage 48 VDC AC Voltage (with adapter) 100 – 240 VAC Maximum Speed 4000 RPM Vapor Tolerance Unlimited Maximum Inlet Speed Unlimited Maximum Outlet Speed 1 barg Noise Level (With Frame) 60 dB(A) Noise Level(With Case) 55 dB(A) Weight (With Frame) 7.5 kg Weight (With Case) 8.5 kg Dimensions (With Frame) 324×225×175mm Dimensions (With Case) 394×236×189mm Inlet/Outlet Connection KF-25 or G 3/8″ Cooling System Air – Cooled Ambient Temperature -40ºC to 50ºC
$3,600.00
True Terpenes Sugar Cookie
True Terpenes Sugar Cookie Get your holiday baking off to a sweet start with Sugar Cookie terpene strain. Notes of soft sugar cookies fresh from the oven lead this dessert strain profile. We then added a swirl of blueberry frosting, a handful of juicy berries, and a hint of soft lavender florals to the mix for a tempting take on the sweet, fruity cross between Crystal Gayle, Blue Hawaiian, and Sensi Star. Recommended Use and Restrictions on Use This product is concentrated and should not be used undiluted. Based on your use of this product, determine appropriate warnings and directions for your products and applications; also determine safety standards and conduct testing. Avoid contact between this undiluted product and skin, eyes, wood surfaces, and fabrics. Keep this undiluted product away from children and pets. Discontinue use if any adverse reaction occurs. This product has not been evaluated for safe use in e-cigarettes, or in any nicotine-containing or smoking-cessation product. Not for use with tobacco or nicotine. This product is not intended for use by those who are pregnant, nursing, or by those with serious health conditions including but not limited to high blood pressure and diabetes. This product is not intended to diagnose, treat, cure or prevent any disease. Store in original container, sealed tightly, in a cool, dry place away from sunlight or heat sources. This product should not be used beyond its stated expiry date. Products made with this item should be tested to determine suitable shelf life. WARNING True Terpenes cannot anticipate all conditions under which this information and this product, or the products of other manufacturers in combination with this product, may be used. It is the user’s responsibility to stay current with respect to applicable laws and regulatory investigations and findings, and to ensure safe conditions for use, handling, storage and disposal of the product. The user assumes all liability for loss, injury, damage or expense due to unauthorized or improper use, and True Terpenes disclaims all such liability. The information in this sheet was written based on knowledge and experience currently available. To date, True Terpenes has not received any evidence confirming that this product has caused any adverse health consequences. The above information relates only to this product and not to its use in combination with any other material or any particular process, and is designed only as guidance for the handling, use, processing, storage, transportation, and disposal. It should not be considered as a guarantee or quality specification. True Terpenes has performed no testing on this product in e-cig/vaping applications. Applying heat to a compound or mixture of compounds may promote new product formation by thermal degradation. New products could include harmful or potentially harmful compounds. It is the sole responsibility of the individual(s) purchasing this product to assess its safety in the final application. The above information is based on data provided by and collected from recognized sources such as distributors, manufacturers, and technical groups and is considered to be accurate to the best of True Terpenes’ knowledge, based upon current information as of the publish date of this document. It is the responsibility of the user to review all safety information about this product and determine its safety and suitability in their own uses, processes, and operations. Appropriate warnings and safe handling procedures should be provided to all handlers and users of this product, taking into account the intended use and the specific conditions and factors relating to such use in accordance with all applicable laws and regulations. COA & Ingredient Disclaimer This Certificate of Analysis contains specifications and results provided by contract laboratories external to True Terpenes. This document does not relieve the purchaser from conducting their own tests in order to verify the suitability of this product for its application and to comply with all relevant legal requirements for any goods into which this product is incorporated. Botanically derived and/or synthetic compounds found in this product may contain trace compounds which can potentially result in a slight variance between lots. The limits in this Certificate of Analysis may not be inclusive of all compound regulations in your region. Shelf Life Disclaimer Unless otherwise stated on the label, COA, or SDS, the intended use for this product is one year from the date of purchase or listed manufacturing date. It is crucial to observe product label directions and store terpenes properly to maintain product integrity. Terpenes are volatile organic compounds (VOCs) and may degrade over time. Customers may contact our quality department at info@trueterpenes.com to obtain further information regarding a specific production lot. Nutritional Statement True Terpenes certifies that, to the best of our knowledge, the product listed above does not contribute to the nutritional value of flavors due to their extremely low usage levels and therefore falls under the nutritional labeling exemption defined in Section 101.9(a) and (j) of Title 21 of the Code of Federal Regulations. Testimonial Disclaimer In accordance with the FTC guidelines concerning the use of endorsements and testimonials in advertising, please be aware of the following: Testimonials appearing on this website are received in various forms via a variety of submission methods. To the best of True Terpenes’ knowledge, the testimonials reflect the real-life experiences of individuals who used our products and/or services. However, individual results may vary. We do not claim, nor should the reader assume, that any individual experience recounted is typical or representative of what any other consumer might experience. Testimonials are not necessarily representative of what anyone else using our products and/or services may experience. The testimonials displayed are given verbatim except for grammatical or typing error corrections. Some testimonials may have been edited for clarity, or shortened in cases where the original testimonial included extraneous information of no relevance to the general public. True Terpenes is not responsible for the opinions or comments posted on this website, and does not necessarily share the opinions, views, or commentary of postings on this website. All opinions expressed are strictly the views of the poster or reviewer. Testimonials on this website are not intended, nor should they be construed, as claims that the products or services mentioned can be used to diagnose, treat, cure, mitigate or prevent any disease. To the contrary, our products are not intended to diagnose, treat, cure, or prevent any disease. No testimonial has been clinically proven or evaluated, and no health, functional or structural claims whatsoever were made and no statements on this website have been evaluated by the FDA or any other regulatory agencies. Intended Purchasers; Dilution Before Use The products offered on this website are intended for purchase by lawfully operating businesses. These products are not intended for purchase by consumers. Each of these products should be carefully diluted prior to use. COA Sugar Cookie COA Lot# 23081108 Sugar Cookie COA Lot# 23080917 Sugar Cookie COA Lot# 23080918 Sugar Cookie COA Lot# 23081608 Sugar Cookie COA Lot# 23081609 SDS Sugar Cookie SDS PDS Sugar Cookie PDS Company Certificates ISO 9001:2015 GMP Certification FSSC 22000 Food Safety True Grade Quality TRUE GRADE™ It is our promise to you. Our isolated terpenes are triple-distilled making them the cleanest terpenes in the world. Fresh out of the bottle, undiluted, every single one of our products bests the most rigorous consumer safety standards. GMP | ISO-9001:2015 | FSSC 22000 Blended in cGMP facilities adhering to the requirements for a Quality Management System (QMS) specified by ISO 9001:2015 and FSSC 22000 standards. Analyzed Tested and passed True Grade™ safety specifications for residual solvents, pesticides and heavy metals. Stability Tested Rigorously tested with mid-grade distillate against separation, cloudiness and unacceptable levels of color change. We Qualify True Terpenes implements supply-chain control for all raw materials and is proud to provide True Terpenes’ qualification documents such as certificates, licenses and registrations to be qualified as your supplier. Undiluted We do not add PG, VG, PEG, MCT or Vitamin E Acetate to any of our products. Food Grade Manufactured in cGMP facilities using food grade ingredients. UV Protected This product is packaged in a cobalt blue, UV deterrent and food grade bottle with tamper evident seal. Made in the USA Formulated, blended, manufactured and fulfilled in the United States. Ships Worldwide True Terpenes ships its botanical aromatic blends worldwide. Refined Isolates This product contains ultra-pure, molecularly-refined terpene isolates. Only the best. Storage RequirementsKeep in original container, lid securely tightened and away from heat, open flames, sunlight, combustible materials and hot surfaces. No Smoking. Store in a cool dry place. Improper storage can cause terpenes to degrade. DilutionTerpene Strain & Flavor-Infused Strain Profiles, Effects-Based Terpene Profiles & Terpene Flavors:The Terpene products above must be diluted prior to use. (1-5% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Viscosity Extract Modifier:The Terpene product above must be diluted prior to use. (1-3% by total volume). Terpenes are oil soluble and mix well with plant extracts, coconut oil, and more. Handle With CareCan cause skin irritation, do not use PRIOR to dilution.
$121.50 - $2,250.00
1000mL Single Neck RBF, 35/25 Socket Joint
1000mL Single Neck RBF, 35/25 Socket Joint Round bottom, HEAVY WALL single short neck flask with a spherical socket joint. Flasks having a 35/20 socket joint are used as replacements for the collection flask on rotary evaporators.
$79.00
Extend Protection Plan
Extend Protection Plan
$54.99 - $99.99
65 Gallon All-Mesh Bubble Wash Bags
65 Gallon All-Mesh Bubble Wash Bags The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. The Press Clubs bubble wash bags are hand sewn with their proprietary pink stitching, making them 2x stronger than competitors. You can be confident their bags will perform the same no matter if it's your 1st or 1000th wash. They are so confident their bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, they will be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 65 Gallon Vessels Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag)
$149.95
Superfine Agar Powder for Mushrooms Mycology Petri Dishes
Superfine Agar Powder Bacteriological, Food Grade, USP-NF Our Agar Powder is extracted from Red Seaweed. Our agar is a complex polysaccharide and is a top choice for mycology cultures. This superfine agar dissolves quickly and has a high gel strength making it an excellent choice for a variety of applications an petri dishes. Gel Strength (1.5%) : 1020 gm/cm² Gel Temperature: 38-40°C (100-104°F) CAS# 9002-18-0 Gluten Free Allergen Free Vegan & Vegetarian approved Non-GMO Shelf Life: 2 years pH: 5.5-8.5 Superfine Agar Powder Certificate of Analysis
$21.00 - $210.00
Dark City Molds Gumdrop Gummy Molds
Dark City Molds Gumdrop Gummy Molds Available Sizes: 1.3mL 2.15mL 3.6mL MOLD PROPERTIES 100% FDA Approved Food-Contact Safe Platinum Silicone Temperature Resistant - Freezer, Dishwasher & Oven Safe Half Sheet Molds Are Optimized to Fit 2 Molds Per 18” x 26” Full Size Baking Sheet Strategically Designed Geometry Optimized For Rapid Extraction Proprietary Natural Slip Finish For Oil Free Workflow Precision Diamond Tooled Masters For Superior Detail & Finish Guaranteed Highest Resolution Designs On The Market Rapid Demolding Rates - Extract up to 1000+ Gummies Per Minute Perfect for Gummies, Hard Candies, Caramels, Chews, Chocolates, and More 6-10 Year Expected Lifetime with Proper Care & Use OUR PROMISE Every mold that leaves our facility is covered by DCM’s 18 Month Gold Standard Warranty. If you experience any issues within that period, we'll immediately exchange the mold in question. No hassle. No fuss. Committed to creating the highest quality platinum silicone molds in the world. Whether you’re manufacturing gummies, hard candies, caramels, chews, or other confections, our diamond tooled molds will provide superior finish and detail to ensure maximal aesthetic clarity and operational efficiency for your manufacturing workflow. We’re proud to offer best-in-industry performance with our Rose Pro Series™ silicones as well as the most competitive price points on translucent platinum molds currently available. *Assumes a 1ml : 1.4g recipe ratio. Since weight is a metric of a recipe's specific density, we cannot exactly determine the weight of your specific recipe. Please consult the designated volume (ml) specification above to calculate a more exact weight (g) reading. All Dark City Gold Standard SOPs yield a 1ml : 1.4g ratio. Mold Specifications Sizes Avaliable (Volume) Shape Pieces Per Mold Weight Material Options Mold Dimensions Compatibility Square Molds 2.5mL Square 134 3.5g Rose Pro Series, Translucent 280mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 2.85mL Square 234 3.5g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 3.57mL Square 120 5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 192 5.6g Rose Pro Series, Translucent 290mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 6mL Square 165 8.4g Rose Pro Series, Translucent 391.6mm x 286.5mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 1.5g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor, Baker Perkins ServoForm Mini 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Triangle Molds 2.66mL Triangle 210 3.7g Rose Pro Series, Translucent 280mm x 379.7mm Hand Fill, Flood & Scrape, Universal Depositor 2.8mL Tetrahedron 95 3.9g Rose Pro Series, Translucent 135mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 4.1mL Triangle 160 5.7g Rose Pro Series, Translucent 285mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor Mutidose Molds 2.25mL Cube 144 3.2g Rose Pro Series, Translucent 254mm x 355mm Hand Fill, Flood & Scrape, Universal Depositor 3.3mL Rhombus 209 4.6g(each segment: 2.3g*) Rose Pro Series, Translucent 284mm x 375.4mm Hand Fill, Flood & Scrape, Universal Depositor 4mL Square 165 5.5g Rose Pro Series, Translucent 289mm x 380mm Hand Fill, Flood & Scrape, Universal Depositor 12.5mL Rectangle 60 17.5g Rose Pro Series, Translucent 279.3mm x 385.2mm Hand Fill, Flood & Scrape, Universal Depositor 23.5mL Square Rope 20 32g (each segment: 3.2g*) Rose Pro Series, Translucent 258mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 42.4mL Rectangle 18 59.4g Rose Pro Series, Translucent 240.9mm x 381.3mm Hand Fill, Flood & Scrape, Universal Depositor Cube Molds 1mL Cube 609 15.g Rose Pro Series, Translucent 286mm x 398mm Hand Fill, Flood & Scrape, Universal Depositor 1.6mL Cube 275 2.2g Rose Pro Series, Translucent 289mm x 384mm Hand Fill, Flood & Scrape, Universal Depositor 2.2mL Cube 209 3g Rose Pro Series, Translucent 289mm x 365mm Hand Fill, Flood & Scrape, Universal Depositor 3.4mL Cube 280 4.8g Rose Pro Series, Translucent 275.9mm x 394.7mm Hand Fill, Flood & Scrape, Universal Depositor Coin Mold 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 2.17mL Coin 176 3g Rose Pro Series, Translucent 289mm x 374mm Hand Fill, Flood & Scrape, Universal Depositor 2.5mL Coin 120 3.5g Rose Pro Series, Translucent 276mm x 387mm Hand Fill, Flood & Scrape, Universal Depositor 3.26mL Coin 165 4.6g Rose Pro Series, Translucent 289mm x 385mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL Puck 88 9.9g Rose Pro Series, Translucent 283.2mm x 390.2mm Hand Fill, Flood & Scrape, Universal Depositor 7.1mL (Bit) Coin 88 9.9g Rose Pro Series, Translucent 280.2mm x 386.1mm Hand Fill, Flood & Scrape, Universal Depositor 34.3mL Coin 35 48g Rose Pro Series, Translucent 268.1mm x 371.7mm Hand Fill, Flood & Scrape, Universal Depositor 45.2mL Coin 20 63.3g Rose Pro Series, Translucent 293.0mm x 365.3mm Hand Fill, Flood & Scrape, Universal Depositor Gum Drop 1.3mL Gum Drop 388 1.82g Rose Pro Series, Translucent 286mm x 390mm Hand Fill, Flood & Scrape, Universal Depositor 2.15mL Gum Drop 176 3g Rose Pro Series, Translucent 289mm x 392mm Hand Fill, Flood & Scrape, Universal Depositor 3.6mL Gum Drop 140 5g Rose Pro Series, Translucent 259mm x 363.6mm Hand Fill, Flood & Scrape, Universal Depositor
$150.00 - $250.00
1/4" Insulon Vacuum Jacketed Hose, Low Pressure
1/4" Insulon Vacuum Jacketed Hose, Low Pressure Due to vendor policies, any of these Insulon Vacuum Jacketed Hoses are final sale, non-returnable, and non-refundable. Technical Specifications: Hose Size 1/4" ID DN (ISO 10380) 6 Product Category LP (Low Pressure) Inner Hose ID 0.236” Tube Stub OD 0.250” Tube Stub Thickness 0.035” Outer Hose OD 1.05” Static Bend Radius 2.65” Dynamic Bend Radius 8.86” Lengths 2 – 20’ Operating Temperature -270°C to 900°C (-454°F to 1652°F) Material 316L stainless steel Maximum Allowable Working Pressure (MAWP) by Temperature: Product Category Hose Size Max Temperature (C) Max Temperature (F) MAWP (PSI) Low Pressure (LP) 1/4" ID 21 70 72 Low Pressure (LP) 1/4" ID 66 150 67 Low Pressure (LP) 1/4" ID 93 200 64 Low Pressure (LP) 1/4" ID 121 250 62 Low Pressure (LP) 1/4" ID 149 300 60 Low Pressure (LP) 1/4" ID 166 330 58 Low Pressure (LP) 1/4" ID 204 400 56 Low Pressure (LP) 1/4" ID 232 450 56 Low Pressure (LP) 1/4" ID 260 500 55 Low Pressure (LP) 1/4" ID 316 600 55 Low Pressure (LP) 1/4" ID 371 700 55 Low Pressure (LP) 1/4" ID 427 800 54 Low Pressure (LP) 1/4" ID 482 900 53 Low Pressure (LP) 1/4" ID 538 1000 53 Low Pressure (LP) 1/4" ID 593 1100 48 Low Pressure (LP) 1/4" ID 649 1200 44 Low Pressure (LP) 1/4" ID 704 1300 40 Low Pressure (LP) 1/4" ID 760 1400 35 Low Pressure (LP) 1/4" ID 816 1500 28 Low Pressure (LP) 1/4" ID 899 1650 18
$240.00 - $1,008.00
6" Jacketed Hemispherical Reducer Compression
6" Jacketed Hemispherical Reducer Compression This hemispherical reducer will go from a 6" tri clamp to a 1/2" Compression fitting. The compression fitting is the preferred choice for sanitary connections to eliminate possible contamination from particles getting stuck within threads. The jacket around the outside of the reducer has 2x 1/2" NPT ports to connect to a temperature controlled circulator.
$325.00
Micro-Cap Filters
ErtelAlsop Micro-Cap Filters 1 Micron Grade M-503P Diatomaceous Earth Micro-Cap 1 Micron Grade MC-55CP Carbon Filled Micro-cap With single-use technology on the rise, our new ErtelAlsop MicroCap Laboratory Cabinet has been created to simplify f iltration and separation trials for research and development, as well as, process development laboratories. This attractive and well organized Cabinet easily stores the filters you require. The MicroCap™ suite of single-use capsules provide a uniquely f lexible line of disposable depth filter products designed for optimizing and developing processes during scale-up and scale-down studies. The MicroCap 22 capsule enables quick and efficient determination of appropriate media grades in providing the best filtration performance as well as required f iltration area to meet process volumes. Each MicroCap Laboratory Cabinet is supplied with forty-eight MicroCap 22 capsules in twelve different grades ranging from a nominal 15 micron to 0.2 micron. All supplied capsules contain 22.5 cm2 (3.48 in2) of filtration area per capsule. These easy to use capsules allow users to test a comprehensive range of depth filter media and efficiently determine the right solution for their process needs. Applications MicroCap capsules are designed for small volume processing of: Primary separations/prefiltration Secondary clarification Cell culture harvest Cell culture clarification DNA removal Endotoxin reduction Host Cell Protien (HCP) reduction Protein aggregate removal Decolorization Performance The MicroCap Laboratory Cabinet incorporates ErtelAlsop’s MicroCap capsules each containing our high performance XL Series, and select MicroMedia series grades of depth filter media to provide the optimum balance of dirt holding capacity and throughput. Containing a high performance grade of diatomaceous earth filter aid, coupled with a strong positive zeta potential, ErtelAlsop’s XL media capsules provide superior contaminant retention. The XL Series of depth filter media exhibits 2-5 times the throughput of competitive media while maintaining equivalent or better product clarity. Reliability As with all ErtelAlsop depth filter products the MicroCap capsules provide performance consistency and lot to lot traceability all in an easy-to-use format. All MicroCap capsules are batch tested in order to meet all quality requirements and meet all applicable USP requirements including the Class VI Plastics. Scalability The MicroCap series of single-use capsules contain six easily scalable sizes of capsules. Additionally each of these capsules readily scale to ErtelAlsop’s 12” and 16” diameter lenticular depth filter modules.
$27.00
BVV Centrifuge Belt
Centrifuge Belt Replacement Belt for the 160L & 45L Centrifuge. *Each centrifuge may have multiple belts
$95.00 - $125.00
Nitrogen Saver Ball Valve
The Nitrogen Saver Ball Balve can be added to the end of a hose used to prevent loss of solvent or nitrogen when disconnecting a hose. The Nitrogen Saver allows you to seamlessly transfer your nitrogen supply from one vessel to another allowing you to switch from solvent transfer to clearing out the material column with ease. This item is available in 1/4", 3/8", and 1/2" JIC attachments. **Disclaimer: a hose completely filled with solvent should not be left closed on both ends, the solvent can warm up and build extreme pressure very quickly.
$70.00 - $80.00
ChemTek L550 Centrifuge
ChemTek L550 Centrifuge L550 centrifuges provide excellent performance and easy operation in a compact design that saves valuable time and laboratory space. Specifications: Power Supply:110V 50/60Hz Max Speed:4000 RPM Max RCF:3040xg Max Capacity:4x500ml Time Setting Range:1min - 99min Speed Accuracy:± 10r/min Noise: ≤65dB Power Consumption:750W Net Weight:115lbs Comes with: (16) 50ml Tube (4) Regular Mouth Basket (4) Regular Mouth Stainless Jar Lid/Band (4) Four 50ml Tube Holder Insert (4) Regular Mouth Jar Spacer Insert (1) 50-pack 5”x 7” Double Stitched Fuge Bags (1) Terp SqueeGee (1) 100-Pack of Large Diamond Grip Gloves ChemTek L550 Centrifuge User Manual ChemTek L550 Centrifuge SDS
$4,700.00
CHEMTEK ChloroSorb Neutral
CHEMTEK ChloroSorb Neutral ChloroSorb Neutral is an acid-activated bentonite/carbon adsorbent that has been neutralized to a neutral pH of 7. General uses are bleaching, deodorizing, or heavy metal removal. ChloroSorb Neutral SDS
$50.00 - $2,000.00
BVV™ Extraction RACK #7
BVV™ Extraction RACK # 7 Rack 7 has 4.5" thick vertical support bars and 3x horizontal bars to complete our strongest standard extraction rack. This rack includes 4x locking caster wheels that can also be adjusted to be level on uneven surfaces. For ease of mounting equipment, we recommend our pipe hangers with hang on brackets Rack Dimensions (L x W x H) 30" x 39" x 60" (Assembled units come with a 30-day warranty) Note: The unit does not come assembled - select "pre-assembled" from the drop-down menu to have the unit assembled by BVV before shipping Pipe hangers are not included There is no warranty on unassembled units Shipping Notice: If the customer orders the rack as assembled, then the item will only ship via freight and there will be additional shipping charges.
$2,250.00
2L Standard Short Path Parts Kit
Short Path Distillation Setup Short path distillation is used for compounds that are not stable at high temperatures. It can also be used to purify small amounts of a compound. The 2L Distillation Kit gives users an easy to use system that will get them up and running at an affordable price. It includes all stands, clamps, clips, This Kit Does NOT include a vacuum pump, circulator, or heating source. Please see the below recommendations for both as well as recommended add-ons. Or check out our 2L Standard Distillation Turnkey Setup which includes vacuum pump, circulator, and mantle. Recommended Vacuum Pumps: Pro Series 5.6CFM Corrosion Resistant Two Stage Vacuum Pump (recommended option) Just Better 6 CFM 2 Stage Deep Vacuum Pump (economy option) Best Value Vacs VE280 9CFM Two Stage Vacuum Pump (economy option) Recommended Circulators: Polyscience 7 Liter MX Heated Circulator (economy option) Polyscience 7 Liter MX Refrigerated Circulator (premium option with chilling capability) Recommended Heating Mantle: BVV 2L Heating Mantle Recommended Add-Ons: Glass Dewar Style Cold Trap (recommended cold trap) Bullseye Precison Vacuum Gauge (premium vacuum gauge for measuring depth) CT40 or CT80 Electronic Cold Trap (electronic cold trap, dry ice replacement) Short Path Distillation Kit Specifications: Boiling Flask Size: 2L Recieving Flask Size: 250ml Batch Capacity approximate: 2L = 400-1000 grams Run time: 4 to 8 hours dependent upon material composition and throughput Distillation Temperature Range: 140-250C (Do not exceed 250C) Recommended Condenser Temperature: 40-50C This Kit Comes Standard With The Following: Glass Components: 2L 2-Neck Boiling Flask Short Path Head Triple Neck Cow 3x 250mL Single Neck Receiving Flask 1/8" 14/20 PTFE Thermometer Adapter 1/4" 24/40 PTFE Thermometer Adapter 120mm Glass Funnel Accessories: Magnetic PTFE Stirring Bar Retriever Keck Clips 3 Finger Clamp Adjustable 0-70mm Boss head 6" x 6" Scissor Jack 250-500ml Cork Stand Traceable Kangaroo Thermometer - Digital Distillation Quick Start Guide This guide gives basic quick start instructions for distillation systems. It is intended to provide a starting point for learning the process. Parameters should be adjusted to suit specific needs. Before beginning distillation, ensure the following steps have been taken: Vacuum Pump is in good working order. Pump should be run against dry load to allow internals to warm up. Oil should be clear. Cloudy or dark oil should be changed. All glass components are in good working order and ready to be assembled A winterization and degassing procedure has been done to prepare oil for distillation The unit's max internal temperature cannot exceed 380C. The recommended max set temperature should not exceed 250C Once all three of these steps have been completed, you are ready to begin distilling. Begin by placing stir bar in boiling flask and then load your material. This should be done using a funnel. A small amount of alcohol in the oil will give it a thinner consistency making it easier to transfer. Assemble all glassware and ensure each joint is properly greased. Do not use too much, as the vacuum pressure might pull some grease into the system. To ensure a full seal, spread grease in a circular motion by rotating glassware Attach circulator to condenser and set temperature to 50C. Allow circulator to reach temperature before beginning distillation. Connect vacuum pump to manifold. The manifold will allow you to isolate each individual component as well as let atmosphere into and out of the system. Connect receiving cow to cold trap. Connect cold trap to manifold. Connect vacuum gauge to manifold. At this point, ensure all connections are correct. Also ensure receiving cow is positioned to collect the first fraction in the far-left receiving flask. Circulator should be at its set temperature. Turn on vacuum pump to begin process. Turn on heat and set to 60C. Vacuum pump will begin to pull down and temperature will begin to rise. Watch the gauge to monitor vacuum pressure and stability. Start stir slower and increase speed with temperature. Once you are close to 60C, increase the temperature 20 degrees. Continue to raise the heat incrementally in 20-degree steps, increasing the set temperature as you near your set point. Increase temperatures incrementally until you reach 220C. You will see your first fraction somewhere between 180C and 190C or slightly before. This is the “heads” fraction. You will move to your second fraction when you see an increased reaction in the head, a slight color change toward golden, as well as a thickening of distillate. When this fraction hits, allow the distillate to “self-clean” the head for a minute or two then, rotate the cow to the middle receiving flask. Collect your “main body” fraction. You will see temps between 190-220C during this fraction. Continue to increase stirring speed as necessary. Reaction in the head may vary but it should never stop. As fluid level in the boiling flask decreases, increase stir speed. The final “tails” fraction is a mixture of the first and second fractions and should be saved for re-distillation later. Ideally, you want to turn the cow to the final flask before the tails fraction hits. The “tails” fraction has an obvious color change and will be darker than the “main body” fraction. You will see temps between 200-250C during this fraction. As fluid level in the boiling flask decreases even more, set stirring RPM higher (1000+ RPM). You may need to compensate with a bit more heat to finish of the final fraction as well. Once process is complete, stop heat, stop stir, and stop vacuum. Let atmosphere into the system. Be sure to properly store your distillate as exposure to air and light can cause oxidation. Learn more about short path distillation components and FAQs with this distillation guide. *Notice to Customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. BVV™ is not responsible for the failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail, which can cause bodily harm or damage to the surrounding area.
$475.00
Chemical-Resistant Viton® Fluoroelastomer O-Ring
Chemical-Resistant Viton® Fluoroelastomer O-Ring 1/16 Fractional Width, Dash Number 006
$0.95
Large 1-Micron Refinement Filter
Large 1-Micron Refinement Filter Filter large volumes of solutions with ease with our Large 1-micron Refinement filter. complete with our 1-micron Dutch Weave sintered disk these refinement filters provide complete retention of the filter paper making it impossible for suspended particles to bypass the filter paper. Made from the highest quality 304 stainless steel parts this large refinement filter is built to last making it a great alternative to polypropylene filter trolleys. Our Large 1-Micron Refinement filter is available as a complete kit with and without the a Welch BTpro100 Diaphragm Pump. Processing Power Funnel Capacity: 22.24 Liters/5.88 Gallons Collection Capacity: 50 Liters/13.2 Gallons Specifications 12"x12" Funnel Body 12" 1um Dutch Weave Sintered Disk 12" Hemispherical Ring stand 1/2" JIC Drain Valve 50L Stainless Steel Carboy Collection base -30Hg Vacuum Gauge 1/2" JIC Vacuum Port 3/8" JIC Diptube Valve 1/4" JIC Butterfly Accessory Valve 350MM Ashless Filter Paper Silicone Gaskets
$2,300.00 - $5,600.00
3 Gallon Stainless Steel collection Base
3 Gallon Stainless Steel Collection Base The standard collection base for our benchtop 1-micron Refinement filter. This 3-Gallon Collection Base is made from the highest quality 304 stainless steeland can be adapted to collect filtrate from a variety of small scale filtration apparatuses from traditional buchner funnels to refinment filters. Comprised of glass & stainles steel components this collection base is compatible with a variety of different solvents & solutions. This Collection base pairs nicely with our 1 Micron Refinement filters, diaphragm vacuum pumps or our line of spark-free vacuum pumps when paired with a cold trap. Specifications Collection Capacity: 11.35 Liters/3 Gallons 3 Gallon Stainless Steel Collection Base 10.75" Glass Lid with silicone gasket 1/4" JIC Collection Port 1/4" JIC Butterfly Vacuum Valve Back Mount Vacuum Gauge
$190.00
BVV Gift Certificate
Don't know what to get for Christmas? Give a gift certificate
$10.00 - $500.00
Caster Wheels for Reactors
Heavy duty replacement wheels to be used on 50L, 150L, and 300L BVV Stainless Steel Reactors.
$30.00
Ice Water Extraction Kit
BVV's Ice Water Extraction Kit Designed with our solventless extractors in mind BVV's Ice Water Extraction Kit was engineered for durability and ease of use. Comprised of our sanitary grade seamless 55-gallon 304 stainless steel washing vessels. Our easy drain barrels come complete with 4X 1.5" Triclamp drains mounted as low as possible for effortless draining of its 55-gallon volume capacity. Perfect for medium to large-scale ice water extraction labs this kit comes complete with industry-leading Boldtbags Lock-top Full mesh stacker grading bags and a 20lb capacity Large BoldtBags Open Top Washing Bag for unbridled durability and ease of use. The ice Water Extraction Kit comes with your choice of either a low shear Multi-stage pump ideal for gravity draining or a hash-safe pneumatically driven diaphragm pump. Processing Power Material Capacity Per Batch: 20-30LB Water Capacity: 55 Gallons Cycle Time: 60-90 Minutes Daily Extraction Capacity: Up to 60 lb, per 8-hour shift Specifications 2X 23"x36" 55-gallon Stainless Steel Washing Vessel 4X 1.5" Tri-clamp ports 4X BoldtBags Lock-top Full mesh stacker grading bags (190um(Green),160um(Red),90um(Black),45um(White)) 1X Large Boltd Open Top Wash Bag (20lb Capacity) 1X Food grade PTFE mixing paddle 1X 27 GPM Low shear Multistage pump or 16 GPM hash-safe pneumatically driven diaphragm pump. 1X 25Ft 1" Clear Braided PVC Hose 1X 1.5" Tri-clamp Thermometer (0-220F/0-100C) 4X Polycarbonate Sight glasses 2X 1.5" Tri-Clamp Butterfly valves with 1" barbed fittings Performance Seamless sanitary construction Low-mounted drain ports for complete draining Tri-Clamp Thermometer for water temperature measurement Polycarbonate sight glasses for visual monitoring of the process Open Top Wash Bag for easy loading & unloading Low-shear force Multistage pump for gentle water transfer or a hash safe pneumatically driven diaphragm pump
$5,750.00 - $7,400.00
Leader Ecoplus Horizontal Multistage Pump 240 3/4 HP - 115v
Leader Ecoplus Horizontal Multistage Pump 240 3/4 HP - 115V Applications Multi-stage, self priming centrifugal pump with horizontal shaft, with optimal liquid aspiration even in the presence of air bubbles, featuring extremely quiet operation suitable for domestic water supply and pressurization, irrigation of gardens and general water movement. Constructional features of the pump Technopolymer pump body and motor support. Technopolymer impeller, diffuser, self-priming disc. Carbon/ceramic mechanical seal. Constructional features of the motor Induction motor, closed and cooled with external ventilation. Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and a long life. Built-in thermal and current overload protection on ECOPLUS230 Bult-in thermal and resettable overload protection on ECOPLUS 240/250 Capacitor permanently in circuit. Manufactured according to UL 778 -2010 & CSA 108-1 Motor protection: NEMA3 Terminal Box protection: NEMA3 Insulation class: F Standard voltage: 115v 60Hz Technical data Operating Range From 1 to 27gpm with a head up to 197ft (85 psi) Liquid quality requirements: clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized, chemically neutral, close to the characteristics of water Liquid temperature Range: From 32°F to 95° Maximum Suction depth: 26 ft Maximum ambient temp: 104°F Maximum operating pressure: 116 psi Installation: fixed or portable in a horizontal position Special version on request other voltages and/or frequencies Leader Ecoplus Pump Data sheet EcoPlus Pump Instructions
$460.00
Haier Ultralow -86C freezer, Energy Star 828L (29f), 220V/60Hz
Haier Ultralow -86C freezer, Energy Star 828L (29f), 220V/60Hz Haier Ultra-Low Temperature Freezers Microprocessor-controlled system designed for controllable range of -40°C to -86°C for cabinet space with 1°C increment Large LED display for cabinet temperature, set temperature, ambient temperature, and input voltage Settable high temperature and low temperature alarms Automatic clean-filter alarm and sensor error alert Adjustable storage shelf height Can be connected with network, and remote alarm systems Optional temperature recorder, storage racks and storage boxes Field Proven Reliability Refrigeration system designed and manufactured with best known practice, and components with highest possible quality Reliability test performed and passed on all models including aging test on control electronics at 85°C and 85% humidity environment Unique insulated inner door design for four separate storage compartments to minimize frost buildup inside the chamber Specialized control system design for a well-balanced operation of cascade refrigeration system Safety Equipped with a complete alarm system with optional remote network monitoring system UL and CE certified for application safety Malfunction alarms including high and low temperature, power outage, sensor errors, high voltage and low voltage, clean-filter, and extremely high ambient, door ajar feature standard on DW-86L486/728/828 models Capable of producing two types of alarm outputs: audible buzzer and visible flashing light Multiple built-in system protection features including user-settable protection code for controls, user settable delay to start, voltage compensation system, and protection against extreme high voltages USB port for temperature data downloading Safety padlock compatible on outer door Installation and Application Wide range operating voltage system from 185V to 260V designed to allow units installed in areas with poor voltage condition Suitable for 10°C to 32°C Ambient temperature Input voltage and ambient temperature shown simultaneously for ease of monitoring environmental conditions Freezer design for global installations Robust door latch designed for secure door closing and compact casters for ease of maneuvering Low Sound Level Specialized refrigeration system design using whisper quiet fan and compressors Freezer chassis designed to absorb vibration and sound 'J' Series Energy Saving Models Advanced Features (for models ending in 'J') Unique door seal and breaker design for the minimum loss of cold temperature during a door opening High performance VIP insulation panels to minimize cabinet heat gain and to improve temperature stability Patented cabinet insulation system designed for optimal performance of cold storage temperature and minimal frost buildup Condensator can intelligently start-stop to reduce power consumption Unique design of independent insulated inner door systems for independent access of storage space to provide the maximum protection of stored samples and save energy Energy star rated Energy saving models: Hydrocarbon natural environment friendly refrigerants refrigeration system make super low energy consumption Model DW-86L728J Technical Data Cabinet Type Upright Climate Class N Cooling Type Direct Cooling Defrost Mode Direct Cooling Refrigerant HC Noise Lever(dB) 51.5 Performance Cooling performance (°C) -86 Temperature Range(°C) -40~-86 Control Controller Microprocessor Display LED Electrical Data Power Supply (V/Hz) 220-240/50 Power 1000 Electrical Current (A) 10 Functions High/Low Temperature Y Remote Alarm Y Hot Condenser Y Power Failure Y Sensor Error Y Low Battery Y High Ambient temp Y Door Ajar Y Accessories Caster Y Foot Y Test Hole Y/2 Shelves/Inner Doors 3/4 Temperature Recorder Optional USB Interface Y Rs232?485 Interface Optional CO₂ Backup System Optional LN₂ Backup System Optional Racks & Boxes Optional Dimensions Capacity(L/Cu.Ft) 828/29.2 Net/Gross Weight(approx) 380/410(kg) 837.7/903.9（lbs） Interior Dimensions(W*D*H) 870*716*1310（mm） 34.3*28.2*51.6（in） Exterior Dimensions(W*D*H) 1145*980*1980（mm） 45.1*38.6*78.0（in） Packing Dimensions(W*D*H) 1190*1045*2150（mm） 46.9*41.1*84.6(in) Container load (20'/40'/40'H 8/20/20 Others Certificate CE
$14,369.00
5/16-18 Grade 2 Steel Nylon Locknut - 5 Pack
5/16-18 Grade 2 Steel Nylon Locknut 5/16 - 18 Low Profile Lock Nut. This nut fits on vacuum chamber gauges and manifolds. SOLD AS A 5PACK
$4.00
10' PVC Hose Kit, PP Nozzle, 1" Female Camlock, for Drums or IBC Totes
10' PVC Hose Kit, PP Nozzle, 1" Female Camlock, for Drums or IBC Totes The 26BNZ1 is an IBC Kit with a 10' PVC hose and Polypropylene (PP) 1" nozzle with 1" camlock couple that dispenses liquids from drums. The kit needs to be used with the 26BNZ4. The 1" OD nozzle has a Viton O-Ring. The dispensing nozzle is hand operated and both the hose and nozzle are resistant towards chemicals. Disclaimer: This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
$160.00
You have seen 1776 out of 2684 products