Your Shopping Cart

It appears that your cart is currently empty!

CONTINUE SHOPPING

Edwards nXDS6iC 4.0 cfm Chemical-Resistant Dry Scroll Pump

MFR: Edwards

SKU: A73502983 1 Year Limited Warranty
$5,020.99

Free Ground Shipping at $420


Flat Rate Shipping On Orders Under $420!


*some exclusions may apply


Ships Separately

You will earn 0 points for this purchase.


0
Price Match

Description - Click to Expand

Edwards nXDS6iC 4.0 cfm Chemical-Resistant Dry Scroll Pump

 

The Edwards nXDSiC pumps are specifically designed for vacuum outgassing of material that is aggressive, acidic, or corrosive. The “C” designation means that this chemically resistant pump is fitted with Chemraz® internal valves and stainless steel fittings.

 

 

Features and Benefits

  • Chemical and corrosion resistant with Chemraz® internal valves and stainless steel fittings for extra protection from the pumped media
  • Lubricant-free within the vacuum envelope and hermetically sealed means totally clean and dry vacuum to prevent cross contamination
  • No atmosphere to vacuum shaft seals means bearings are completely isolated, which prevents process attack and means the bearings run cooler and last longer
  • Simple single sided scroll arrangement combined with an innovative motor and bearing design allows for easy field service with a minimum of special tooling for low cost of ownership and maximum up-time
  • Improved motor and drive efficiencies for reduced power and cost of ownership
  • Advanced interface provides a variety of traditional, analogue and digital control methods enabling remote control/monitoring via USB, RS232 or RS485
  • One year warranty, as well as technical support from Edwards

 

Applications

  • General clean pumping applications
  • Scanning Electron Microscopes - SEM
  • Beam lines and high energy physics
  • Backing turbo pumps
  • Centrifuges, ultra-high speed
  • Coating
  • Cryogenics
  • Degassing/curing - oil, epoxy resin
  • Distillation/extraction/filtration
  • Freeze drying
  • Furnaces
  • Gel drying
  • Laboratory bench top vacuum
  • Lasers, gas recovery and recirculation
  • Leak detectors, Helium
  • Load locks and transfer chambers
  • Rare gas recirculation
  • Rare gas recovery
  • Refrigeration manufacture
  • Research and development
  • Rotary, centrifugal evaporators
  • SEM/FIB (ion beam repair)
  • Solvent recovery
  • Surface science instruments

 

 

Specifications
Power requirements 100-127V~10A or 200-240V~6A, 50/60 Hz, 260 watts
Nominal rotational speed 1800 rpm
Displacement

6.2 m3h-1 / 3.6 ft3min-1

Peak pumping speed

6.2 m3h-1 / 3.6 ft3min-1

Ultimate vacuum (total pressure) 0.020 mbar  /  0.015 Torr / 15 micron
Minimum standby rotational speed 1200 rpm
Speed control resolution (% of full speed) 1%
Maximum inlet pressure for water vapour 35 mbar
Maximum water vapour pumping rate

110 gh-1

Maximum continuous inlet pressure 200 mbar
Power connector 1-ph IEC EN60320 C13
Recommended fuse 10A, 250Vac rms
Unit/shipping weight 58 Lb / 63 Lb
Unit/shipping dimensions 16.5x10x12" / 20.5x13x14" (DxWxH)
Inlet flange NW25 (KF25)
Exhaust flange NW25 (KF25)
Noise level 52 dB(A)
Vibration at inlet flange

< 4.5 mms-1   (rms)

Leak tightness (static)

< 1x10-6 mbar ls-1

Operating temperature range 10 to 40 °C  /  41 to 104 °F
Edwards part number A73502983
Certification CE, UL, CSA