Cascade CDO-28 Dry & Decarb Oven

VendorCascade Sciences
Share
- WhatsApp
- Deel
- X
- Pin it
- Messenger
- Email

Description

Cascade CDO-28 Dry & Decarb Oven

This item carries up to a 2 week lead time.

Cascade’s CDO-28 is purpose-built for large-scale, industrial decarboxylation of material with additional features:

28 Cu. Ft.

Built-in Humidity Sensor assists in dryness targets

Stay in place sliding extension shelves

NRTL Certification

6 each FDA & temperature rated fine micron mesh bags for ground material – Mesh bags are required to prevent oven contamination and material loss.

This powerful, large capacity forced air laboratory oven uses heated air to remove unwanted compounds from products that are not temperature sensitive. Our ovens feature horizontal airflow that enables more consistent distribution of air. They are designed to have uniform temperatures and airflow across the shelf space from right to left.

The CDO-28 includes a built-in humidity sensor and fine micron mesh bags for drying or decarboxylating powders or ground material.

Ideal Uses:

Industrial scale forced-air convection drying below 149ºC / 300ºF

Decarboxylation processes

Drying organic material. Drier material will yield better results than processing wet material. Removing as much moisture as possible pre-processing will save time in the post process of vacuum purge and winterization.

Lab glassware dryer

Model CDO-28 Features

Horizontal Airflow. The airflow moves uniformity across the shelf space from right to left

Digital set-point control, timer and overtemp failsafe protection

Humidity sensor displays relative humidity levels during process

Includes 6 sliding, extend and stay in place shelves for ease of loading. Stainless Steel.

Includes 6 temp-rated, fine micron mesh bags for easy loading & uniform drying of messy powders, ground up or turbulent materials

Fast heat-up: 24 Minutes to 149ºC (300°F) / Uniformity: +/- 2ºC (3.5°F)

Stainless steel interior / Food lab grade construction. 301 SST Shelves

Triple wall construction meets CE, UL and TUV requirements to keep work-spaces cool.

Quality Made in Oregon USA

1 Year Warranty

The Cascade Difference

Basic forced-air lab ovens are mass-produced and sold by many large scale laboratory equipment distributors. But there are key differences between Cascade and other less costly, often imported lab ovens:

Independent Overtemp Failsafe Protection

The Cascade Sciences CDO-28 is equipped with a heating cutoff system that will automatically stop power to the heaters when the overtemp setting is tripped. This protection system will provide peace of mind for overnight or unattended drying processing.

NRTL Certification. No Extra cost.

The CDO-28 Oven comes certified by the Nationally Recognized Test Lab, TUV. This certification is a requirement by many municipalities.

CAN/CSA-C22.2 No. 61010-1:2012
+UPD No. 1:2015-07 + UPD No. 2:2016-04
CAN/CSA-C22.2 No. 61010-2-010:2015
UL 61010-1:2012-05
UL 61010-2-010:2015
EN 61010-1:2010
EN 61010-2-010:2014

Rigorous Quality Assurance in an ISO Certified, USA Manufacturing Facility

Cascade Sciences manufactures our ovens in Oregon, USA. We are proud of our ISO 9001 Certification/Accreditation. Each oven completes a series of quality assurance procedures before shipment:

Electrical & mechanical safety is thoroughly tested in compliance with TUV requirements

Functional testing verifies user settable items consistent with most lab protocols/usage models

Temperature verification includes calibration & temp chamber uniformity following ASTM standards

Units are cleaned and packed in ISTA tested, certified packaging materials

Specifications
Capacity	Volume	28 Cubic Ft. (793 Cubic Liters)
	Interior	31.5″W x 60.5″H x 26″D
	Interior	800mm x 1,537mm x 661mm
	Exterior	43”W x 85.5”H x 34.3”D
		1,092mm x 2,171mm x 871mm
		1,092mm x 2,171mm x 871mm
Temperature	Temperature Range	2.2ºC (36°F) above room temp to 148ºC (300°F)
	Temperature Stability	+/- 2ºC (+/-3.5°F)
	Temp Recovery @ 240°F Load Dependent	Door Open 30 Seconds: 3 min to stabilize
	Temp Recovery @ 240°F Load Dependent	Door Open 60 Seconds: 5 min to stabilize
Power	230V – 240V / 1ph / 26AMP
	Oven Must Be Hardwired By Electrician
	Oven will also run on 208V
	BTUs Per Hour at Max Power	18,425 BTUs
Air Stats	Air Intake	Adjustable. Top 2.75” Diameter
	Air Exhaust	Adjustable. Top 2.75” Diameter
	Linear Shelf Space Airflow	17.1 cubic ft per min
Shelving	Quantity Included	6 each. Height adjustable.
	Surface Area	31”W x 23”D (787mm x 584mm)
	Weight Capacity	75 lbs (34 kg)
Mesh Bags	Quantity Included	Comes with 6 Temp Rated Mesh Bags
	Quantity Included	Comes with 6 Temp Rated Mesh Bags
	Dimensions	27.5″W x 21.5″D (699mm x 546mm)
Polypropylene (PP)	Melt Temperature	161°C (363°F)
	Softening Point	152°C (305°F)
	Heat Deflection Temperature	90°C (194°F)
	Glass Transition Temperature	0°C (32°F)
* Mesh bags are REQUIRED to prevent oven contamination and ground material loss.
* Polypropylene products produced for some filtration applications are made from resin that complies with FDA regulations for food contact. The regulation compliance is product number dependent / specific.
* Impact at cold temperatures is likely to cause strand cracking or breakage
Weight	Product Weight	565 lbs (256 kg)
Weight	Shipping Weight	640 lbs (290 kg)
Certifications	ISO 9001 NRTL TUV #U8 170464972 077 CAN/CSA-C22.2 No. 61010-1:2012 + UPD No. 1:2015-07 + UPD No. 2:2016-04 CAN/CSA-C22.2 No. 61010-2-010:2015 UL 61010-1:2012/R:2016-04 UL 61010-2-010:2015 EN 61010-1:2010 EN 61010-2-010:2014
Warranty	1 Year