Come See Us At MJBiz Con! Booth #1828

Cascade CVO-2 Vacuum Oven

Description

Cascade CVO-2 Vacuum Oven

Model CVO-2 offers incredible temperature stability for vacuum drying and purging of pharmaceuticals, botanicals, slurries, or any temperature sensitive material. This vacuum oven liberates solvents, water, and other unwanted compounds in small batch, R&D and lab environments. NRTL Certified.

Operating Range:  Ambient +10ºC to 150°C (Ambient +18°F to 300°F)

Benchtop Size: 1.47 Cubic Ft (47.2L) 12″W x 20″D x 12″H

Exceptional Temperature Control & Stability

The CVO-2 uses a unique control logic not found in most lab grade vacuum ovens. The temperature probe is INSIDE the oven, which minimizes temperature overshoot and delivers best-in-class temperature stability and uniformity particularly in the low temperature ranges. Accurate, stable temps throughout the CVO-2 eliminate hot and cold spots, making accurate use of every inch of shelf space.

Independent Over-temp Failsafe Protection

The CVO-2 is equipped with a heating cutoff system that will automatically stop power to the heaters when the oven shelf temps exceed 200°C or 392°F. This protection system will provide peace of mind for overnight processing or unattended vacuum bake outs.

Digital Vacuum Gauge

The digital vacuum gauge installed on the CVO-2 is factory default set to read in inches of mercury (“Hg) with a scale of 0 – 29.9”Hg. Change the unit of vacuum measurement to read in a wide variety of units from mmHg, bar psi, kPa, cm2, mmH20. Zero out the vacuum gauge to calibrate for just above sea level adjustments.

Equipped for Inert Gas Backfill. Built-In Safety Relief

Introduce inert gasses such as nitrogen, argon, helium, etc. as part of your process via the 1/4″ rear vent barb. The maximum backfill pressure is 15psi at the inlet. In an overpressure situation, a simple, built-in safety relief allows gasses to escape via a spring loaded tempered window.

Flexible Pumping / Feedthru Connection Ports

The CVO-2 ovens offer two different vacuum oven connection points. The standard connection is a 3/8″ dia barb located at the rear of the oven. It is connected to the vacuum valve level on the front control panel. For even faster evaporation, purging or drying consider upgrading to the MAXEVAP connection kit. The MAXEVAP connection kit secures to the oven’s rear 1″ dia KF-25 port located on the back center of the chamber. The MAXEVAP connection never reduces flow by continuing with 1” diameter vacuum rated clear lines, a 1” dia KF-25 side mounted vacuum valve and KF-25 fittings and hardware. This KF-25 port can also be used to run temperature feedthroughs, or monitoring sensors inside the vacuum chamber during processing.

Stackable Shelf Design For Maximum Temperature Conduction

Under vacuum, there is no air inside a vacuum oven. Temperatures are achieved by a process of conduction and radiation to move temperatures into the product inside the oven. stackable shelf design makes the most of this opportunity by making the chamber longer and narrower, rather than square and supplies stackable shelves in multiple height configurations to allow for the fastest, most uniform transfer of heat.

Ergonomically Designed, Easy Quarter-Turn Valves

For anyone that has struggled with consistently turning the small, round, low-quality vacuum/vent valves, relief is in sight. You will love our large, quarter-turn vacuum/vent valves. Your wrists will thank you!

Door Gasket Options – Ideal For Your Process

Vacuum ovens come standard with a High Temp Silicone Door Gasket. We also offer a Solvent resistant BUNA gasket as well. Ask us about the variety of door gaskets we can supply based on your application: Silicone, BUNA, Viton, Fluorosilicone. Gaskets will eventually wear out. It’s ideal to keep a few spares on hand.

Features

CVO-2 STANDARD Package Includes:

Features:

  • NRTL Certified by TUV
  • 5 shelves (11.5″W x 19″D) in a flexible configuration. Stack-able and removable
  • Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven
  • Bright LED lights in window for visibility of sensitive material
  • Digital vacuum gauge reports in wide variety of measurement units
  • Simple, set-point control
  • Smooth, quarter-turn vacuum and vent valves
  • Rear KF-25 port allows for rapid MAXEVAP purging or running feedthroughs inside oven for monitoring
  • 120V (220V available)
  • Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007  156CFR/201 11  SGCC -2577 ½ UA
  • Adjustable leveling feet ensure oven sits solid and level in the workspace

CVO-2 Connections

  • 3/8″ Barb for Vacuum Pump
  • 1/4″ Barb for Venting (N2 Connection OK)
  • KF-25 Port for feedthroughs or MAXEVAP Connection Kit

Specifications

Capacity

Volume:
1.67 Cu Ft (47.2 L)

Exterior:
20.5″W x 28.8″D x 24.9″H (521mm x 732mm x 633mm)

Interior:
12.0″W x 20.0″D x 12.0″H (304mm x 508mm x 304mm)

Temperature

Temperature Range:
Ambient +10ºC to 150°C (Ambient +18°F to 300°F)

Temperature Uniformity:
@ 105°F ±2.5°F
@ 200°F ±7.5°F
@ 300°F ±16.0°F
@ 40°C ±1.4°C
@ 90°C ±4.2°C
@ 150°C ±8.9°C

Temperature Stability:
@ 105°F ±0.3°F
@ 200°F ±0.3°F
@ 300°F ±0.3°F

@ 40°C ±0.2°C
@ 90°C ±0.2°C
@ 150°C ± 0.2°C

Heat Up Times:
To 105°F 60 minutes
To 200°F 126 minutes
To 300°F 180 minutes

To 40°C 60 minutes
To 90°C 126 minutes
To 150°C 180 minutes

*Temperature performance specifications are preformed in empty ovens. Performance can vary in ovens containing product and variable ambient conditions.

Vacuum

Vacuum Valve:
1/4 Turn Lever

Vent Valve:
1/4 Turn Lever

Vacuum Gauge:
Digital 0 to 29.9″Hg

Temperature Controller:
Digital Set Point
Accurate Within .5ºC (1°F)
Independent Overtemp Failsafe

Ports (Rear)

Vacuum:
3/8″ Barb

Vent:
1/4″ Barb

Auxiliary:
KF-25 Port

Inert Gas Introduction:
Use 1/4″ Vent Barb
15 psi max inlet pressure

Power Options

CVO-2 (120V Standard)
110V – 120V / 1ph / 8A  50/60Hz (Cord Included)
NEMA 5-15R Power Outlet
Full Power 2456 BTU/hr

CVO-2-2 (220V)
220 – 240V / 1ph / 4A 50/60 Hz (Cord Included)
NEMA 6-15R Power Outlet

Shelving

Includes 5 aluminum, stackable, removable

1″ High = 1 each
2″ High = 2 each
3″ high = 2 each

Surface Area:
11.5″W x 19″D

Weight Capacity:
50 lbs (22.7 kgs)
*Flexible configuration, 4 shelves max

Door

Interior Lighting:
LED Strips (Rated to 150°C)

Glass Window:
Tempered NGI-US to ANSI Z97.1.2007

Gasket Type:
12″ x 12″ High Temp Silicone Standard

Gasket Rated to:
 230°C (446°F)

Gasket Options:
Solvent Resistent BUNA Option rated to 105°C (221°F)
Viton Option rated to 205°C (401°F)

Weight

Unit Weight:
179 lb (81.2 kg)

Shipping Weight:
218 lb (99 kg)

Shipping Dimensions:
33″L x 33″W x 47″D (Class 85)

CV0-2 Vacuum Oven Accessories:

CVO-2 2″ Shelf
CVO-2 3″ Shelf
CVO-2 PTFE Sheets


Cascade CVO-2 Vacuum Oven

Product form

SKU: CS-1901010061

$6,889.00

You will earn 6,889 points for this purchase.
  • Want it cheaper? Call us for a wholesale or processor discount. 331-281-0154
  • Join Loyalty+ and save 10-15% *Select items

Price Match

    This is a Sample Product Title
    Was $200.00 Now $100.00

    Login

    Forgot your password?

    Don't have an account yet?
    Create account