3/8" x 1/8" Wall - Heavy Duty Silicone Tubing For Flow

Description

SILCON® Silicone Tubing

(**Note: This tubing is only for flow and is NOT vacuum rated)

    • The most outstanding properties of SILCON tubing are its flexibility and resistance to temperature extremes. These, plus its good electrical properties and ability to self-extinguish, make SILCON tubing an excellent choice for appliances and computers
    • Peroxide-cured SILCON contains no sulfur or other acid-producing chemicals, thereby eliminating the possibility of staining, corroding, or deteriorating materials it contacts. It is extremely resistant to ozone and U.V. over long time periods.
    • Care is recommended in the selection of fittings and clamps for SILCON as sharply barbed fittings or unlined metal clamps could tear into the tubing wall and possibly cause a failure.
    • SILCON may be low-pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.
    • Please call or email Best Value Vacs to request different sizes and thickness (1/16" to 3/4"ID) - Colors for industrial applications are available through minimum order.

Key Features:

    • Made from FDA-sanctioned ingredients
    • Able to resist extreme temperature variation: -100°F to 500°F
    • Translucent natural color for visual contact with the flow
    • resilient, stretchable, and resistance to compression set
    • Odorless, tasteless and inert
    • Good electrical and weatherability properties - resists U.V., ozone, gases, and moisture
    • Certified by the National Sanitation Foundation (NSF-51) for food equipment materials
    • MADE IN THE U.S.A.
Specifications/Physical Properties
Hardness, Shor A +/-5 50
Tensile Strength, PSI 1100
Elongation at Break % 375
Brittle Temperature °F -100
Max Operating Temperature °F 500
Max Operating Temperature for NSF °F 350
Comp. Set 22 Hrs. at 177°F, % 35
Tear Resistance (PPI minimum) 100


 

Tubing Specifications Chart
ID (IN.) OD (IN.) STANDARD LENGTH WORKING PSI @ 70°F BURST PSI @ 70°F LBS PER 100FT
1/16 1/8 100 10 30 0.50
1/16 3/16 100 20 60 1.34
3/32 5/32 100 10 30 0.66
3/32 7/32 100 15 45 1.58
1/8 3/16 100 10 30 0.88
1/8 1/4 100 20 60 2.00
1/8 5/16 100 25 75 3.32
1/8 3/8 100 28 84 4.92
5/32 9/32 100 20 60 2.14
5/32 11/32 100 20 60 3.64
3/16 1/4 100 5 15 1.22
3/16 5/16 100 20 60 2.64
3/16 3/8 100 20 60 4.12
3/16 7/16 100 15 45 6.14
1/4 5/16 100 10 30 1.50
1/4 3/8 100 5 15 3.34
1/4 7/16 100 20 60 5.12
1/4 1/2 100 15 45 7.50
5/16 7/16 100 10 30 3.66
5/16 1/2 100 10 30 6.30
3/8 1/2 100 10 30 4.32
3/8 9/16 100 10 30 7.15
3/8 5/8 100 10 30 10.16
3/8 3/4 100 15 45 16.72
7/16 5/8 100 10 30 7.70
1/2 5/8 100 5 15 5.84
1/2 11/16 100 5 15 9.50
1/2 3/4 100 10 30 13.12
1/2 7/8 100 10 30 15.00
5/8 3/4 100 5 15 6.86
5/8 13/16 100 5 15 11.34
5/8 7/8 100 5 15 13.38
5/8 1 100 10 30 22.86
3/4 1 50 5 15 17.64
3/4 1-1/8 50 10 30 26.56

3/8" x 1/8" Wall - Heavy Duty Silicone Tubing For Flow

Product form

SKU: 2802086-6

$38.00

    • Unlock Bulk & Wholesale Pricing. Call 331-281-0154 for special discounts.
    Financing Available

    Use one of partners to pay over time. Click here for our financing options beyond Shopify payments.

    Description

    SILCON® Silicone Tubing

    (**Note: This tubing is only for flow and is NOT vacuum rated)

      • The most outstanding properties of SILCON tubing are its flexibility and resistance to temperature extremes. These, plus its good electrical properties and ability to self-extinguish, make SILCON tubing an excellent choice for appliances and computers
      • Peroxide-cured SILCON contains no sulfur or other acid-producing chemicals, thereby eliminating the possibility of staining, corroding, or deteriorating materials it contacts. It is extremely resistant to ozone and U.V. over long time periods.
      • Care is recommended in the selection of fittings and clamps for SILCON as sharply barbed fittings or unlined metal clamps could tear into the tubing wall and possibly cause a failure.
      • SILCON may be low-pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.
      • Please call or email Best Value Vacs to request different sizes and thickness (1/16" to 3/4"ID) - Colors for industrial applications are available through minimum order.

    Key Features:

      • Made from FDA-sanctioned ingredients
      • Able to resist extreme temperature variation: -100°F to 500°F
      • Translucent natural color for visual contact with the flow
      • resilient, stretchable, and resistance to compression set
      • Odorless, tasteless and inert
      • Good electrical and weatherability properties - resists U.V., ozone, gases, and moisture
      • Certified by the National Sanitation Foundation (NSF-51) for food equipment materials
      • MADE IN THE U.S.A.
    Specifications/Physical Properties
    Hardness, Shor A +/-5 50
    Tensile Strength, PSI 1100
    Elongation at Break % 375
    Brittle Temperature °F -100
    Max Operating Temperature °F 500
    Max Operating Temperature for NSF °F 350
    Comp. Set 22 Hrs. at 177°F, % 35
    Tear Resistance (PPI minimum) 100


     

    Tubing Specifications Chart
    ID (IN.) OD (IN.) STANDARD LENGTH WORKING PSI @ 70°F BURST PSI @ 70°F LBS PER 100FT
    1/16 1/8 100 10 30 0.50
    1/16 3/16 100 20 60 1.34
    3/32 5/32 100 10 30 0.66
    3/32 7/32 100 15 45 1.58
    1/8 3/16 100 10 30 0.88
    1/8 1/4 100 20 60 2.00
    1/8 5/16 100 25 75 3.32
    1/8 3/8 100 28 84 4.92
    5/32 9/32 100 20 60 2.14
    5/32 11/32 100 20 60 3.64
    3/16 1/4 100 5 15 1.22
    3/16 5/16 100 20 60 2.64
    3/16 3/8 100 20 60 4.12
    3/16 7/16 100 15 45 6.14
    1/4 5/16 100 10 30 1.50
    1/4 3/8 100 5 15 3.34
    1/4 7/16 100 20 60 5.12
    1/4 1/2 100 15 45 7.50
    5/16 7/16 100 10 30 3.66
    5/16 1/2 100 10 30 6.30
    3/8 1/2 100 10 30 4.32
    3/8 9/16 100 10 30 7.15
    3/8 5/8 100 10 30 10.16
    3/8 3/4 100 15 45 16.72
    7/16 5/8 100 10 30 7.70
    1/2 5/8 100 5 15 5.84
    1/2 11/16 100 5 15 9.50
    1/2 3/4 100 10 30 13.12
    1/2 7/8 100 10 30 15.00
    5/8 3/4 100 5 15 6.86
    5/8 13/16 100 5 15 11.34
    5/8 7/8 100 5 15 13.38
    5/8 1 100 10 30 22.86
    3/4 1 50 5 15 17.64
    3/4 1-1/8 50 10 30 26.56

    Returns & Delivery

    When will my order be delivered?

    We ship worldwide. Your order will be packaged really carefully and delivered wherever you want. Delivery takes between 2-4 business days. You will receive an e-mail after ordering with more information about the delivery.

    Can I return my product?

    Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition. Hazmat and consumable products are non-returnable. Please take a look at our policies in the website footer, for the list of exceptions and more details about our return policy.

    What can I do if my item (or part of it) is damaged?

    We work hard to deliver your items without damage. Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

    Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account