The 1lb closed loop hydrocarbon extractor performs incredible botanical extraction within a sealed, vacuumed system. With the help of a top-fill input, solvent washes through the material column, collecting oils as it passes over the material. The oil-bearing solvent is collected in the collection base under the material column. Once collected, the solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent.
***Note: Solvent not included with systems unless ordered separately. Any order with butane WILL NOT SHIP EXPEDITED.***
***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors.
KEY BENEFITS
Meets or exceeds all industry listed standards
Versatile in running butane, propane, and other blended solvents
Faster run times and less degradation in the process
Extractor Configuration:
Explorer: Our standard, most economical setup, perfect for the entry level extractor on a budget. Comes with a welded bottom base and standard LP tank. This model has minimal features to keep cost low, while providing the necessary equipment to get the job done.
Professional: This model features upgrades to help produce a higher quality extract. Solvent is input into the material column with a showerhead endcap, ensuring the full material column is saturated with solvent. The Professional comes with a sleeved spool, allowing users to utilize dry ice to freeze the material column. This will help lock in fats and waxes to the material. An inline ball valve is used to allow solvent to be suspended in the material column, as well as closing the collection base off during recovery. Upon completion of the run, extract removal is made simple by adding a removable bottom to the collection base.
Elite: The Elite series is the premium version of the Professional. It features all American made instrumentation valves by SSP, an AVCO ultra-low temperature inline ball valve, jacketed collection base, and all high-pressure clamps. The jacketed collection gives precision during recovery, allowing a heated fluid to be circulated around the base. This method keeps temperature both accurate and consistent. The elite series adds a level of dependability needed for those seeking to produce the highest quality extracts. *NOTE* This model requires a heater circulator or chiller
Explorer
Professional
Elite
BVV 316SS Full Bore Valves
Welded Bottom Base
BVV 316SS Full Bore Valves
Showerhead
Dewaxer
Ball Valve
Splatter Platter Base
SSP Valves
Showerhead
Dewaxer
AVCO Ball Valve
HP Clamps
Jacketed Base/Platter
Unit Includes:
6"x6" Welded Bottom Base
6"x6" Open Spool
Assembled 6" extractor lid
3"x24" Material column with reducer & top cap
Mastercool 6LB Solvent Recovery Tank
(1) 1/4" 48" FJIC Stainless Steel hose
(1) 1/4" 60" FJIC Stainless Steel hose
(1) 1/4" FJIC HVAC hose
Standard pressure single pin clamp
Instruction Manual
Specifications:
3"x 24" 304 Stainless Steel Material Column-1lb capacity (450g)
304 Stainless Steel Base Container 6" diameter by 12" tall
Tri-Clamps at all interfaces make for a high pressure/standard pressure, easy clean unit
BUNA-N Gaskets are designed for Oil Processing Temp range -40-200F, and have superior solvent resistance
Base unit Maximum Capacity: 395 cubic inches, (6.472 Liters)
Construction: All components made of 304 Stainless Steel.
Max Vacuum -29.9inHg
High Polish Interior
*Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.
Cylinder Volume
Select Material
How Much Will Fit in Cylinder
Formula Volume x Weight of Water x Specific Gravity
Constants Weight of Water = 0.0360 (lbs / in3) Specific Gravity of =
The 1lb closed loop hydrocarbon extractor performs incredible botanical extraction within a sealed, vacuumed system. With the help of a top-fill input, solvent washes through the material column, collecting oils as it passes over the material. The oil-bearing solvent is collected in the collection base under the material column. Once collected, the solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent.
***Note: Solvent not included with systems unless ordered separately. Any order with butane WILL NOT SHIP EXPEDITED.***
***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors.
KEY BENEFITS
Meets or exceeds all industry listed standards
Versatile in running butane, propane, and other blended solvents
Faster run times and less degradation in the process
Extractor Configuration:
Explorer: Our standard, most economical setup, perfect for the entry level extractor on a budget. Comes with a welded bottom base and standard LP tank. This model has minimal features to keep cost low, while providing the necessary equipment to get the job done.
Professional: This model features upgrades to help produce a higher quality extract. Solvent is input into the material column with a showerhead endcap, ensuring the full material column is saturated with solvent. The Professional comes with a sleeved spool, allowing users to utilize dry ice to freeze the material column. This will help lock in fats and waxes to the material. An inline ball valve is used to allow solvent to be suspended in the material column, as well as closing the collection base off during recovery. Upon completion of the run, extract removal is made simple by adding a removable bottom to the collection base.
Elite: The Elite series is the premium version of the Professional. It features all American made instrumentation valves by SSP, an AVCO ultra-low temperature inline ball valve, jacketed collection base, and all high-pressure clamps. The jacketed collection gives precision during recovery, allowing a heated fluid to be circulated around the base. This method keeps temperature both accurate and consistent. The elite series adds a level of dependability needed for those seeking to produce the highest quality extracts. *NOTE* This model requires a heater circulator or chiller
Explorer
Professional
Elite
BVV 316SS Full Bore Valves
Welded Bottom Base
BVV 316SS Full Bore Valves
Showerhead
Dewaxer
Ball Valve
Splatter Platter Base
SSP Valves
Showerhead
Dewaxer
AVCO Ball Valve
HP Clamps
Jacketed Base/Platter
Unit Includes:
6"x6" Welded Bottom Base
6"x6" Open Spool
Assembled 6" extractor lid
3"x24" Material column with reducer & top cap
Mastercool 6LB Solvent Recovery Tank
(1) 1/4" 48" FJIC Stainless Steel hose
(1) 1/4" 60" FJIC Stainless Steel hose
(1) 1/4" FJIC HVAC hose
Standard pressure single pin clamp
Instruction Manual
Specifications:
3"x 24" 304 Stainless Steel Material Column-1lb capacity (450g)
304 Stainless Steel Base Container 6" diameter by 12" tall
Tri-Clamps at all interfaces make for a high pressure/standard pressure, easy clean unit
BUNA-N Gaskets are designed for Oil Processing Temp range -40-200F, and have superior solvent resistance
Base unit Maximum Capacity: 395 cubic inches, (6.472 Liters)
Construction: All components made of 304 Stainless Steel.
Max Vacuum -29.9inHg
High Polish Interior
*Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.
Cylinder Volume
Select Material
How Much Will Fit in Cylinder
Formula Volume x Weight of Water x Specific Gravity
Constants Weight of Water = 0.0360 (lbs / in3) Specific Gravity of =
