Specialty Chemicals

65 products

Filter

Show previous products

  • 6% Hydrogen Peroxide Food Grade H2O2 6% Hydrogen Peroxide Food Grade H2O2

    View options

    6% Hydrogen Peroxide Food Grade H2O2

    6% Hydrogen Peroxide Food Grade is double the strength of the peroxide that is typically found in retail stores across the country.  6% peroxide is a stronger disinfectant than the typical 3%.  It's great for stronger household cleaning.  It has more power to lift stains, kill mold, whiten grout lines, and whiten the whites in the laundry.  Our peroxide is USA made, sourced locally and we replenish the stock frequently to provide the freshest delivered peroxide. Made with high purity deionized water.  6% peroxide is the preferred by hairstylists/hairdressers to lift color and open up the cuticle to allow pigment to penetrate.  If you want to dilute this to 3% you will need add 1x the volume of 6%.  Example: If you had 1 gallon of 6% and wanted to make 3% you will need 1 gallon of distilled or R.O. water to mix in with your 1 gallon of 6%.  You will end with 2 total gallons and the concentration will drop to 3%. Hydrogen Peroxide 6% Safety Data Sheet (SDS) Hydrogen Peroxide 6% Certificate of Analysis (Example) COA

    Read more

    $14.00 - $480.00

    View options

  • Inland 56 Vacuum Pump Oil (LVO 200) Inland 56 Vacuum Pump Oil (LVO 200)

    View options

    Inland Vacuum Inland 56 Vacuum Pump Oil (LVO 200)

    Inland 56 Vacuum Pump Oil The Inland 56 is an equivalent to the Leybold LVO 200 oil. This oil can be used in pumps specifically designed for pumps that use the Leybold LVO 200 oil. Inland 56 Vacuum Pump Oil Safety Data Sheet SDS

    Read more

    $23.00 - $3,815.00

    View options

  • Julabo C5 Thermal Bath Fluid - 10 Liters

    Julabo Julabo C5 Thermal Bath Fluid - 10 Liters

    Julabo C5 Thermal Bath Fluid JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for best results in temperature control. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are specifically matched with each JULABO temperature control unit. C5 Thermal Bath Fluid SDS C5 Thermal Bath Fluid Product Data Sheet JULABO Thermal bath fluids have been carefully selected and are optimized for maximum performance with JULABO instruments. Benefits Low toxicity Low viscosity High stability Minimum odor Good heat conductivity Low corrosion tendency Wide temperature ranges Technical Data Order no. 10 liters 8891402 Working temperature (°C) -60...+110 Flash point (°C) > +135 Fire point (°C) > +443 Viscosity (kinematic at 20 °C in mm²/s) 5 Density (at 20 °C in g/cm³) 0.918 Pour point (°C) -100 Boiling point (°C) >205 Ignition temperature (°C) 443 Color clear

    Read more

    $2,114.00

  • Lacquer Thinner - Reclaimed Lacquer Thinner - Reclaimed

    View options

    Lacquer Thinner - Reclaimed

    Lacquer thinner thins lacquers and epoxies.  Its great for cleaning tools and equipment.  This is a medium - fast drying solvent.  The lacquer thinner we carry is LT-R which stands for lacquer thinner - reclaimed.  Lacquer Thinner Certificate of Analysis (Example) COA Lacquer Thinner Safety Data Sheet SDS

    Read more

    $9.00 - $550.00

    View options

  • Julabo Thermal C10

    View options

    Julabo Julabo Thermal C10

    Julabo Thermal C10  JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for the best temperature control results. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are matched specifically with each JULABO temperature control unit. JULABO Thermal bath fluids have been carefully selected and optimized for maximum performance with JULABO instruments. Thermal C10 is a clear 10 cSt silicone fluid rated for use in open bath JULABO units with a working temperature range of -20…+160 °C. Care should be taken to observe atmospheric moisture condensation in the bath fluid with prolonged sub-ambient operation in humid environments. Water and silicone fluids are not miscible. Operation at the maximum temperature for heating applications will result in vapor formation. Vapor formation at elevated temperatures is a normal occurrence for silicone fluids. The upper temperature limit of the fluid is lower than the fluid flashpoint.    

    Read more

    $1,596.00 - $3,170.00

    View options

  • Huber SynOil M10.120.08, Heat transfer fluid -10 to 120°C

    View options

    Huber Huber SynOil M10.120.08, Heat transfer fluid -10 to 120°C

    Huber SynOil M10.120.08, Heat transfer fluid -10 to 120°C SynOil is a low viscosity Poly-alpha-olefin based fluid with a strongly enhanced low temperature characteristic. SynOil has excellent thermal stability as well as a very low tendency to evaporate. The fluid has a high viscosity index, which enables the product to flow, even at low temperatures, and not to build a disruptive film at high temperatures.   Safety Data Sheet    Advantages: High thermal stability Low evaporation rate Low tendency to evaporate Transparent, clear     Heat transfer fluid M10.120.08 Working temperature °C -10 to 120 Flash Point °C 145 Fire Point °C 176 Viscosity mm2/s (kinematic at 25 °C) 8 Density g/cm3 (at 20 °C) 0,8 Pour Point °C -66 Ignition temperature °C not specified Colour colourless, clear Thermal expansion coefficient 10-5/K not specified Heat conductivity W/(m·K) at 25 °C not specified Material incompatibility Natural Rubber®Silicone Rubber®

    Read more

    $740.00 - $1,180.00

    View options

  • Methyl Propyl Ketone (MPK) Methyl Propyl Ketone (MPK)

    View options

    Methyl Propyl Ketone (MPK)

    MPK Methyl Propyl Ketone is a medium evaporating solvent. Its commonly used to dissolve synthetic resins in paints, coatings, adhesives and inks.  Compared to MEK, MPK has the slower evaporation rate and lower density which helps prevent solvent trapping.  Solvent trapping is when the solvent in the paint doesn't evaporate before the surface "skins" over. MPK is used in the extraction of oils and fats, offering high solubility for resins and other compounds.  The boiling point is ~ 101°C. MPK is used widely in industrial hemp oil extraction. MPK also known as 2-Pentanone is a clear, flammable liquid with a strong fruity odor.  MPK Certificate of Analysis (Example COA) MPK Safety Data Sheet (SDS)

    Read more

    $14.00 - $1,350.00

    View options

  • Inland 15A Vacuum Pump Oil Inland 15A Vacuum Pump Oil

    View options

    Inland Vacuum Inland 15A Vacuum Pump Oil

    Inland 15A Vacuum Pump Oil     Inland 15A Vacuum Pump Oil Safety Data Sheet SDS

    Read more

    $15.00 - $1,395.00

    View options

  • Huber SilOil M90.055/170.03, Heat transfer fluid -90 to 170 °C

    View options

    Huber Huber SilOil M90.055/170.03, Heat transfer fluid -90 to 170 °C

    Huber SilOil M90.055/170.03, Heat transfer fluid -90 to 170 °C Low viscous, linear polydimethylsiloxane particularly suitable as environmentally friendly cold- and heat transfer media. SilOil M90.055/170.02 can be used in the range from -90 °C to 55 °C (for open systems) and to 170 °C in connection with externally sealed systems (for Unistats) SilOil M90.055/170.02 is characterised by a unique combination of low viscosity and a relatively high flash point. In contrast to competitive products, SilOil M90.055/170.02 oil is not classified as dangerous good and hazardous substance. It allows an economic use even at low temperatures due to its low viscosity. Since the SilOil M90.055/170.02 is based on polydimethylsiloxane this material is easily miscible with other media on the basis of polydimethylsiloxane. SilOil M90.055/170.02 oil is colorless, odorless and non-toxic.   Safety Data Sheet  Technical DataSheet      Heat transfer fluid M90.055/170.02 Working temperature °C -90 to 55/170 open/closed systems: -90°C…55°C Unistats (only closed): -90°C…170°C Material: silicon oil Viscosity at 25°C: 2 mm²/s Color colorless, clear Material incompatibility Silicone rubber

    Read more

    $2,130.00 - $4,190.00

    View options

  • Apiezon T grease

    Apiezon Apiezon T grease

    Apiezon T grease Apiezon T Grease is a silicone-free medium temperature vacuum grease renowned for its quality and tenacity. Apiezon T Grease has gained approval from prestigious organisations including NATO and the US Navy. Apiezon T Grease is a silicone-free medium temperature vacuum grease which: performs well under a wide range of temperatures, from +10 to +120°C is not recommended for highly stressed bearings has added cushioning exhibits good ‘stiction’ or sticking power has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents exhibits a vapour pressure of 4.6 x 10-9 Torr at 20°C As a vacuum grease, Apiezon T Grease is specifically designed for use in the low to medium vacuum range, yet is suitable to be used in the high vacuum range at lower temperatures. We specifically recommend that Apiezon T Grease is used for both sealing and lubrication in medium temperature environments (but not for highly stressed bearings). T Grease confers excellent cohesive strength and therefore when joints are mated they stay mated, forming an extremely efficient, gas tight seal. Apiezon T Grease provides extra cushioning between mated surfaces, and is highly effective in protecting fragile glass to glass joints. The strong absorption properties of Apiezon T Grease give it a powerful ‘gettering’ action . This is of considerable value in the electronics industry where scrupulous cleanliness of metal surfaces is required. Apiezon T Grease has also found a niche as a barrier to oxygen transmission in both vacuum and non-vacuum situations. Apiezon T Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $295.00

  • Thermal P90

    View options

    Julabo Thermal P90

    Thermal P90 JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for the best temperature control results. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are matched specifically with each JULABO temperature control unit. JULABO Thermal bath fluids have been carefully selected and optimized for maximum performance with JULABO instruments. Thermal P90 is a clear 2 cSt silicone fluid rated for use in JULABO PRESTO units only with a working temperature range of -90…+170 °C. This temperature range is only valid when used in PRESTO systems! The internal PRESTO cold oil overlay technology enables for safe operation above the fluid flashpoint. Low Toxicity Low viscosity High stability Minimum odor Good heat conductivity Low corrosion tendency Wide temperature ranges Working Temperature:  90 … +170

    Read more

    $1,218.00 - $2,346.00

    View options

  • Apiezon Q Sealing Compound

    Apiezon Apiezon Q Sealing Compound

    Apiezon Q Sealing Compound Apiezon Q Compound sealant can be used to seal around the edges of flat unground joints, to blank off parts of an apparatus temporarily or to seal glass cylinders to metal plates to produce temporary vacuum enclosures. Whether sealing joints, filling in holes or filling gaps in a vacuum system, it is extremely versatile and is the ideal leak sealant in a wide array of uses and industries. Temporary vacuum sealant Versatile product suitable for a multitude of uses Excellent waterproof medium Easy to use and to remove Ambient temperatures (10 to 30°C) 10 year shelf life MSDS Technical Data Sheet

    Read more

    $300.00

  • Apiezon M grease

    View options

    Apiezon Apiezon M grease

    Apiezon M grease Apiezon M Grease is a silicone and halogen-free high vacuum grease and is ideally suited to all manner of high vacuum applications. Its inherent versatility means M Grease is also frequently used for non-vacuum purposes in both scientific and industrial settings and it is approved for use by NATO. Apiezon M Grease is designed for use in high vacuum environments at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon M Grease is a silicone- and halogen-free high vacuum grease which: does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures exhibits a vapour pressure of 1.7 x 10-9 Torr at 20°C has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As a high vacuum grease with excellent lubrication properties and radiation resistance, Apiezon M Grease is used for many diverse applications. In particular, M Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon M Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon M Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon M Grease this is not a problem. As a halogen-free product, Apiezon M Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, M Grease maintains excellent lubrication properties in high radiation applications, despite a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. Apiezon M Grease has strong powers of absorption, particularly for other hydrocarbon molecules due to its complex hydrocarbon structure and very high molecular weight. Consequently it is frequently used as a stationary phase in gas chromatography. Apiezon M Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $145.00 - $240.00

    View options

  • Apiezon L grease. 25g tube

    Apiezon Apiezon L grease. 25g tube

    Apiezon L grease. 25g tube Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease suitable for use scientific and industrial applications. Apiezon L Grease has the best vapour pressure properties of all the Apiezon products and is therefore suitable for use in ultra-high vacuum applications. L Grease is regularly used by highly respected organisations such as The European Space Agency, NASA and NATO. Apiezon L Grease is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease which: exhibits an extremely low vapour pressure of 7 x 10-11 Torr at 20°C does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As an ultra-high vacuum grease with excellent lubrication properties and radiation resistance Apiezon L Grease is used for many diverse applications. In particular, L Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon L Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon L Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon L Grease this is not a problem. As a halogen-free product Apiezon L Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, L Grease maintains excellent lubrication properties in high radiation applications, demonstrating only a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. To find out more about Apiezon L Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon L Grease Vapour Pressure Graph MSDA Techinical Data Sheet

    Read more

    $210.00

  • Apiezon AP101 grease. 50g tube

    Apiezon Apiezon AP101 grease. 50g tube

    Apiezon AP101 grease. 50g tube Apiezon AP101 is a silicone-free, excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications. Apiezon AP101 is a specialist, anti-seize vacuum grease, containing PTFE, which confers superior anti-seize properties providing glass and metal surfaces with long-lasting lubrication and protection from fusing and corrosion. Apiezon AP101 is a silicone-free anti-seize vacuum grease which: is ideally suited for use in low to medium vacuum ranges having a vapour pressure of <10-5 Torr at 20°C has anti-seize properties, making it an effective protector and lubricant for metal surfaces which may be subject to seizure or corrosion is a critical lubricant is insoluble in most solvents, is resistant to water, alcohols, ketones and esters resists attack from aqueous acid and alkali solutions, alcoholic alkali solutions and corrosive gases. is suitable for use over a wide temperature range does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents. Apiezon AP101 with its superior anti-seize properties is typically used to maintain the smooth operation of stopcocks and taps in scientific and industrial settings. Coupled with easy separation of ground or polished glass joints AP101 is an excellent general purpose grease for laboratory use. The value of Apiezon AP101 anti-seize properties is not limited to laboratory or glassware use, but is equally effective when used on metal equipment which may be subject to seizure or corrosion. Just a small amount of AP101 on fastenings which, when exposed to corrosive environments would normally jam solid, will ensure they are protected. Apiezon AP101 is an excellent general purpose grease for sealing joints and is ideal for use in critical lubrication conditions such as highly stressed bearings. Being hydrocarbon based, Apiezon AP101 does not suffer from the problems of “creep” or “carry over” which is traditionally associated with silicone greases. It reduces sample contamination and consequently the risk of interference in analytical techniques such as infra-red and mass spectrometry. Additionally AP101 can be used with confidence in paint spraying and metal deposition processes. To find out more about Apiezon AP101 Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP101 Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $145.00

  • Apiezon AP100 grease. 50g tube

    Apiezon Apiezon AP100 grease. 50g tube

    Apiezon AP100 grease Apiezon AP100 vacuum grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely high levels of lubricity and has been shown to provide eight times the level of lubrication offered by standard, petroleum-based lubricating greases. Apiezon AP100 is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon AP100 Grease is a silicone-free ultra high vacuum lubricating grease which: has anti-seize properties, making it an effective protector and lubricant in ultra-high vacuums exhibits extremely high levels of lubricity demonstrates an extremely low vapour pressure of 7 x 10-11 Torr at 20°C is recommended for use at ambient temperatures does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents The unique properties of Apiezon AP100 lubricating vacuum grease mean it is frequently used to protect stepping motors and gearboxes from corrosion and abrasion, particularly when they are subjected to high load conditions. AP100 is also used to prevent seizure in stopcocks, taps and small metal fastenings. The creep resistance of Apiezon AP100 benefits scientific and semiconductor users alike. AP100 helps to increase the accuracy of analytical techniques and improve yields in semiconductor manufacture by contamination avoidance. In addition, AP100 is used for surface coating applications where silicone contamination can lead to poor surface adhesion and incomplete coating defects. To find out more about Apiezon AP100 grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP100 Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $290.00

  • Mineral Spirits (<1% Aromatic) Low Odor Mineral Spirits (<1% Aromatic) Low Odor

    View options

    Mineral Spirits (<1% Aromatic) Low Odor

    Ideal for cleanup after painting, Mineral spirits thin oil based paints, stains, and varnishes.  This product also works and an excellent household and automotive degreaser.  Mineral Spirits Certificate of Analysis (Example) COA Mineral Spirits Safety Data Sheet SDS

    Read more

    $9.00 - $745.00

    View options

You have seen 65 out of 65 products

Back to top

BVV’s Specialty Chemicals collection features a curated selection of specialty compounds used in laboratory, analytical, industrial, and formulation applications where specificity, purity, and controlled performance are essential. This collection includes specialty materials such as caffeine, benzocaine, lidocaine, formaldehyde, mercury, sodium metabisulfite, and Oxone, supporting a wide range of technical and research-driven workflows.

Carefully sourced and quality-controlled, BVV specialty chemicals are selected to meet professional standards for consistency, documentation, and reliable chemical behavior. With in-stock availability and knowledgeable technical support, BVV provides trusted specialty chemical solutions for controlled use in precision-focused environments.

Login

Forgot your password?

Don't have an account yet?
Create account