Shop Equipment

624 products

Filter

Show previous products

  • Synder NFX Membrane (150-300Da MWCO) Synder NFX Membrane (150-300Da MWCO)

    View options

    Synder NFX Membrane (150-300Da MWCO)

    Synder NFS Membrane With a pore size ranging between 0.1-10nm, Synder Filtration's nanofiltration membranes enable the passage of water and certain salts through the membrane while effectively retaining multivalent ions, low molecular weight molecules, sugars, proteins, and various organic compounds. A result of extensive research and development, Synder's NFS, NFX, NFW, and NFG nanofiltration membrane products have demonstrated exceptional resistance to fouling, a high level of selectivity, and the physical durability necessary for diverse industrial separation processes. Specifically, NFS, NFX, and NFW exhibit outstanding rejection of MgSO4 and lactose, while NFG is designed to partially remove monosaccharides from oligosaccharides. These nanofiltration membranes, as a whole, have the capacity to significantly reduce levels of hardness, nitrates, sulfates, tannins, turbidity, color, total dissolved solids (TDS), and moderate levels of salt from feed water streams. The proven performance of Synder's nanofiltration membranes makes them well-suited for a broad spectrum of industrial applications including the desolvation of ethanol from botanical extract solutions. BVV utilizes 4X NFS 2540 Membranes inside our Nanofiltration Skid to recovery ethanol at 30 Gallons per hour.   Specifications Polymer: Proprietary PA TFC Approx. Molecular Weight Cutoff: 200-300 DA Typical Operating Flux 30-40 GFD Average Lactose Rejection: 99.7% Average MgSO4 Rejection: 99.5% Average NaCl Rejection: 50-55% Maximum Operating Pressure <95F/35C: 600PSI/41.4 Bar Maximum Operating Pressure >95F/35C: 435PSI/30 Bar Maximum Pressure Drop per Element: 15PSI/1.0 Bar Maximum Pressure Drop per hosing: 60PSI/4.1 Bar Maximum continuous Operation Temperature: 122F/50C Maximum CIP Temperature: 104F/40C Maximum Temperature Operating pH Range: 3-9.5 Ambient Temperature Operating pH Range: 3-10.5 Maximum Temperature Cleaning pH Range: 2-11 Ambient Temperature Cleaning pH Range: 2-11

    Read more

    $577.50 - $3,829.00

    View options

  • 4" Wiped Film Evaporator (WFE) Distillation Turn Key System - USA MADE

    View options

    4" Wiped Film Evaporator (WFE) Distillation Turn Key System - USA MADE

    4" Hybrid Wiped Film Evaporator The BVV 4" Wiped Film Evaporator (WFE) is a full turnkey distillation kit that will allow anyone to run a molecular distillation. With the magnetically driven wiper and high vacuum seals this system is able to achieve vacuum levels below 10 mtorr. The system has multiple temperature control apparatuses that allow the user to dial in specific settings that works best for their application. The maximum operating temperature of the outer jacket is 200°C with the standard circulators shown below. The maximum feed rate is up to 7LPH. On average, you can expect to flow 500-1000ml per hour. All heated circulators can be tailored to your specific needs, just ask our team of experienced account representatives!  The temperature controlled circulators will need thermal fluid that corresponds with the temperatures needed. Click here to browse fluids.  *Heating and Chilling Fluids are not included* Duratherm S - 7 Gallons - Bottom heater (wiper body) Therminol XP Heat Transfer Fluid - 5 Gallons -  Top and middle heater *Propylene Glycol - 5 Gallons - Fluid for the diffusion pump option chiller.  Ethanol 99% or Isopropyl 99% - 2 Gallons - Cold Trap / Cold Finger.    This listing picture reflects the upgraded vacuum/ outlet systems. For a full list of ancillary equipment included in each kit please see the table below: KIT Part of System Component Electrical Requirements (V / Ph / A) WFE04HYB-TK-01 -Standard Model Wiper Assembly BVV™ Stirring motor 120V / 1Φ Vacuum System BVV™ Pro Series 35.3CFM Rotary Vane Vacuum PumpDigiVac Bullseye Precision Vacuum Gauge 220V / 1ΦAA    Batteries (4x) Temperature Controlled Circulators BVV 5 Liter BVV 19 Liter (2x) 120V / 1Φ / 8.3A 220V / 1Φ / 18.1A Injection Beaker and Wrench 7LPH PeristalticHeated Hose 120V / 1Φ120V / 1Φ WFE04HYB-TK-02   -Upgraded Vacuum System -Upgraded Cold Trap Wiper Assembly BVV™ Stirring motor 120V / 1Φ Vacuum System BVV™ Pro Series 35.3CFM Rotary Vane Vacuum PumpULVAC Diffusion Pump (ULK-04A)*DigiVac Bullseye Precision Vacuum Gauge 220V / 1Φ 180-264V / 1Φ / 10.5 AAA Batteries (4x) Temperature Controlled Circulators BVV 5 Liter BVV 19 Liter (2x) 120V / 1Φ / 8.3A 220V / 1Φ / 18.1A Injection Beaker and Wrench 7LPH PeristalticHeated Hose 120V / 1Φ 120V / 1Φ Cold Trap Polyscience IP100 120V / 1Φ / 11.5A WFE04HYB-TK-03   -Upgraded Vacuum System -Upgraded Cold Trap -Outlet Pumps Wiper Assembly BVV™ Stirring motor 120V / 1Φ Temperature Controlled Circulators BVV 5 Liter   BVV 19 Liter (2x) 120V / 1Φ / 8.3A 220V / 1Φ / 18.1A Injection Beaker and Wrench 7LPH PeristalticHeated Hose 120V / 1Φ 120V / 1Φ Cold Trap Polyscience IP100 120V / 1Φ / 11.5A Outlet Pumps Beaker and Wrench Gear Pump (2x)Beaker and Wrench Heat Pad PID Controller 120V / 1Φ 120V / 1Φ Notes: *The ULVAC diffusion pump must be water cooled, if facility water cooling is not an option an additional chiller may be needed, a Polyscience 1HP Durachill is recommended as a recirculating option. Filtered well water is typically sufficient as a cooling method if available.

    Read more

    $29,000.00 - $57,000.00

    View options

  • Automatic Candy Demolder Automatic Candy Demolder

    View options

    Truffly Made Automatic Candy Demolder

    Automatic Candy Demolder Fully Electric! Plug & Play Anywhere – No Compressed Air Required The Automatic Candy Demolder is designed to remove a full sheet of candies from molds in one “pop”. Unmold your trays in second! Ideal for Hard Candy, Gummies, Caramels, Chocolate, Caramel, Taffy and more! The automatic mold “Popper” includes one standard mold frame to match the Truffly Made mold you are using. Please note that molds are not included. Custom mold plates are available for additional 1,699 USD to work with your silicone molds* Unmolding Rate: 15,000+ pieces per hour Adjustable Speed Dimensions:  27.16” W x 38.58” L x 27.56” H *The Automatic Candy Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities. Maximum cavities per mold = 80 Maximum Mold size = 11.5 x 15” Please contact info@trufflymade.com for a custom quote LARGE PIN FITTINGS AVAILABLE HERE ☜ Please select the type of mold you are using from the list, All Truffly Made molds listed are compatible with the demolder. For any silicone mold not listed, or is from a different manufacturer, please contact us before placing an order to verify compatibility. The Truffly Made Automatic Demolder. Easy to use, just one press to pop out a full mold sheet of candies within seconds!. Works best if the candies are cooled off and hardened. Select the mold frame that matches the mold you are using. Place the mold frame in to the Demolder. Add your filled mold on top of frame. Slide the frame in the Demolder Press the pedal. DONE! All your candies are unmolded. PLEASE NOTE THAT THE UNMOLDING EFFICIENCY IS VARIABLE DEPENDING ON PRODUCT STICKINESS. WE RECOMMAND TO UNMOLD WITHIN 3 HOURS AFTER DEPOSITNG FOR BETTER EFFICIENCY. SILICONE MOLDS CAN BE PRE-COATED USING MCT OIL , MINERAL OIL OR COOKING SPRAY TO INCREASE UNMOLDING EFFICIENCY.   Specifications: Height: 700mm / 27.56” Width: 690mm / 27.16” Length: 980mm / 38.58” Weight: approx. 32 kg / 70 lbs with pusher and frame Material: Stainless Steel / Aluminum Power input: 100-240V AC / 50-60Hz Power Output: 24V DC / max.320W Electric motor: 7 amps, force: 10Nm, speed infinitely adjustable up to 70rpm; Change of direction of rotation Treble-bass adjustment; Penetration depth setting: 15mm Foot or Hand Pedal Activated Made in Germany

    Read more

    $11,300.00 - $13,142.00

    View options

  • Compact Universal Depositor Compact Universal Depositor

    Truffly Made Compact Universal Depositor

    Compact Universal Depositor   This Compact Universal Depositor comes with a digital control unit to regulate the temperature from 70F to 300F,  4 adjustable nozzles and a 3 liters / 3.15 quart hopper. It has been designed to work with most of the standard molds on the market, including silicone and polycarbonate products. Use your existing molds or simply adjust molds to fit. Maximum mold size that can fit is 6.5 x 15 inches. Ideal for Gelatin and Pectin gummy. Certified to work with LorAnn Oils Gummy MixCertified to work with Melt To Make™Certified to work with Candy Pros The Compact Universal Depositor delivers accurately metered fillings to the gram with great flexibility.Stainless steel construction with POM case. Four adjustable depositing nozzles, which can be easily positioned or removed to work with any mold layout.   Compact Tabletop Confectionery Depositor 3 Liters The Truffly Made Compact Universal Depositor is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. The Compact Universal Depositor heats for chocolate, gummies and candy Easily adjustable shot size to the exact gram. 3 Liters / 3.15 qt. Hopper Size The four nozzles have adjustable centerlines to accommodate various mold configuration. Nozzles are removable to accommodate molds with less cavities. The heated pistons and hopper maintain temperature and flow. Bottom Hopper heated through pistons while lever bar is down. Front Hopper heated through a heating panel Hygienic stainless steel construction, metal nozzles, POM case. Adjustable temperature digital control panel. The Depositor can work with molds up to 6.5 inches wide. Made in Germany. The complete machine may be disassembled without tools for easy cleaning. Specifications Width:  9.75” Length:  16.5” Height:  11.5” Weight:  23 lbs Hopper Capacity:  3.15 quarts/ 3 Liters Filling Capacity: 1,000+ hourly Power:  110v – 240v Molds up to:  6.5″ wide Material:  Stainless Steel/POM Heat Settings: 70F / 21C to 300F / 150C Guarantee:  12 Months from date of purchase.

    Read more

    $5,400.00

  • Automatic Depositor 20L Automatic Depositor 20L

    View options

    Truffly Made Automatic Depositor 20L

    Automatic Depositor 20L   The Automatic Depositor comes with the 20 liters hopper with heated panels for chocolate, gummy, caramel and hard candy.10 depositing pistons for maximum efficiency and productivity; Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout.Touchscreen Unit Control that allow you to set the required temperature and volume before and during live production.This depositor is designed to work with all the Truffly Made silicone molds and most polycarbonate molds, it delivers accurately metered fillings with great flexibility and can deposit 10,000+ pieces per hour. This system is designed to work with all Truffly Made silicone molds, as well non-Truffly Made molds (Programming fee applies), it delivers accurately metered fillings with great flexibility and can deposit 10,000+ pieces per hour. REMELTING PRODUCT SUCH AS “Albanese Gummies®” IS NOT COMPATIBLE WITH THIS SYSTEM DUE TO VISCOSITY BEING TOO HIGH. For a Professional and Certified remelting process please refer to: – LorAnn Oils Gummy Mix– Melt To Make™– Candy Pros Automatic Confectionery Depositor Truffly Made Automatic Universal Candy Depositor For Gummies, Caramel, Hard Candy: The Truffly Made,  Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery ingredients such as chocolate and ganache, as well as high heat candy ingredients such as caramel, gummies and hard candy. The Automatic Depositor has a large 20L hopper with heated panels Easily adjustable shot size control. Ten nozzles have adjustable centerlines to accommodate various mold configurations. The Automatic Depositor works with molds up to 11.5 inches wide and 15 inches long. Nozzles are removable to accommodate molds with less cavities. Heated panels help chocolate, caramel or gummy products maintain temperature to flow properly. Variable temperature control through Touchscreen Unit Control 40mm L nozzles Compact, space saving design CE certified Made in Germany. The Automatic  Depositor ships with: 10 pistons assembly Complete Heating System 40mm L nozzles stainless steel 20L hopper with cover stainless steel balls stainless steel pallet carrier spare o-rings Width:  19.0” Length:  27.5” Height:  22.5” Weight:  143 lbs Dosage : 1.5 to 7 ml / 0.05 to 0.20 fl oz per pull Accuracy: 0.1 gram / 0.003 fl oz. Capacity : 5.3 gal / 20 liter Filling Capacity: 10,000+ hourly Power Input : 100-240V AC  /  50-60Hz Power Output : 24V DC / max.600W Material: Stainless Steel Maximum Heat : 302°F / 150°C Guarantee:  12 Months from date of purchase. The complete Automatic Depositor can be disassembled without tools for cleaning purposes. Technical Specs

    Read more

    $37,700.00 - $39,700.00

    View options

  • Universal Candy Demolder Universal Candy Demolder

    View options

    Truffly Made Universal Candy Demolder

    Universal Candy Demolder Universal Candy Demolder is designed to remove a full sheet of candies from molds in one “pop”. Demold your trays in second! Ideal for Hard Candies, Gummies, Caramels, Chocolate and Fruit Jelly! The mold “Popper” includes one standard mold frame to match the mold you are using. Please note that the mold is not included. Custom mold plates are available for additional 911 USD to work with your silicone molds. Dimensions:  19.75” w x 19.25” L x 8.25” H The Universal Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities. Maximum cavities per mold = 80 Maximum Mold size = 11.5 x 15” Please contact info@trufflymade.com for a custom quote LARGE PIN FITTINGS AVAILABLE HERE ☜ Please select the type of mold you are using from the list, All Truffly Made molds listed are compatible with the demolder. For any silicone mold not listed, or is from a different manufacturer, please contact us before placing an order to verify compatibility. The Truffly Made Universal Demolder. Easy to use, just one pull to pop out a full mold sheet of candies. Works best if the candies are cooled off and hardened! Select the mold frame that matches the mold you are using. Place the mold frame on to the Demolder. Add your filled mold on top of frame. Pull lever. DONE! All your candies are demolded. PLEASE NOTE THAT THE UNMOLDING EFFICIENCY IS VARIABLE DEPENDING ON PRODUCT STICKINESS. WE RECOMMAND TO UNMOLD WITHIN 3 HOURS AFTER DEPOSITNG FOR BETTER EFFICIENCY. SILICONE MOLDS CAN BE PRE-COATED USING MCT OIL , MINERAL OIL OR COOKING SPRAY TO INCREASE UNMOLDING EFFICIENCY.

    Read more

    $3,231.00 - $4,213.00

    View options

  • Semi-Automatic Depositor - Push & Go Semi-Automatic Depositor - Push & Go

    Truffly Made Semi-Automatic Depositor - Push & Go

    Semi-Automatic Depositor - Push & Go Ideal for novice and experienced operators! The 8 Pistons Semi-Automatic Candy Depositor for chocolate, gummies, taffy, caramel and hard candy is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. The Semi-automatic Depositor comes with a complete heating system with temperatures ranging from 68F to 320F. Filling Capacity: 5,000 – 8,000+ hourly Semi-Automatic 8 Pistons Tabletop Confectionery Depositor Truffly Made Semi-Automatic Candy Depositor For Gummies, Caramel, Hard Candy. The Truffly Made, Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery ingredients such as chocolate and ganache, as well as high heat candy ingredients such as caramel, gummies and hard candy. The Universal Candy Depositor comes with the hopper with heated panels. This Confectionery Depositor has a large hopper with heated panels Easily adjustable shot size control. Eight nozzles have adjustable centerlines to accommodate various mold configurations. The Semi-Automatic Depositor works with molds up to 11.5 inches wide. Nozzles are removable to accommodate molds with less cavities. Heated panels help chocolate, caramel or gummy products maintain temperature to flow properly. Variable temperature control Heavy Duty nozzles Compact, space saving design CE certified Made in Germany. The Universal Semi-Automatic Candy Depositor ships with: 8 piston assemblies Complete Heating System Heavy Duty nozzles stainless steel hopper with cover stainless steel balls aluminum pallet carrier spare o-rings Specifications Width:  18.75” Length:  26.5” Height:  17.5” Weight:  88 lbs Dosage : 1.5 to 7 ml / 0.05 to 0.20 fl oz per pull Capacity : 3.2 gal / 12 liter Filling Capacity: 5,000 - 8,000+ hourly Power Input : 100-240V AC  /  50-60Hz Power Output : 24V DC / max.600W Material: Stainless Steel Maximum Heat : 320°F / 160°C Warranty:  12 Months from date of purchase. The complete Universal Semi-Automatic Depositor can be disassembled without tools for cleaning.

    Read more

    $21,500.00

  • Universal Depositor XL Universal Depositor XL

    Truffly Made Universal Depositor XL

    Universal Depositor XL   he XL Universal Candy Depositor comes with the extra large hopper with heated panels for gummies and hard candies is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with eight adjustable depositing nozzles that can be easily positioned to each mold layout. Comes with 8 Pistons setup with Heavy Duty Nozzles Tabletop XL Confectionery Depositor Truffly Made XL Universal Candy Depositor For Gummies, Caramel, Hard Candy. The Truffly Made, XL Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery ingredients such as chocolate and ganache, as well as high heat candy ingredients such as caramel, gummies and hard candy. This Confectionery Depositor has a extra large 12 liter/3.2 gal hopper with heated panels Easily adjustable shot size control. Eight nozzles have adjustable centerlines to accommodate various mold configurations. The Universal Depositor works with molds up to 11.5 inches wide. Nozzles are removable to accommodate molds with less cavities. Heated panels help chocolate, caramel or gummy products maintain temperature to flow properly. Digital, variable temperature control Additional pistons and nozzles available Heavy Duty nozzles Compact, space saving design CE certified Made in Germany. The Universal Candy Depositor ships with: 8 piston assembly Complete Heating System Heavy Duty nozzles stainless steel XL hopper with cover stainless steel balls aluminum pallet carrier spare o-rings service pack Specifications Width:  15.75” Length:  20.5” Height:  17.5” Weight:  49 lbs Dosage : 1.5 to 7 ml / 0.05 to 0.20 fl oz per pull Capacity: 3.2 gal / 12 liter Filling Capacity: 5,000+ hourly Power Input : 100-240V AC  /  50-60Hz Power Output : 24V DC / max.600W Material: Stainless Steel Maximum Heat : 320°F / 160°C Guarantee:  12 Months from date of purchase. The complete XL Universal Depositor can be disassembled without tools for cleaning.  

    Read more

    $16,739.00

  • Universal Depositor 6L Universal Depositor 6L

    Truffly Made Universal Depositor 6L

    Universal Depositor 6L     The Universal Candy Depositor for gummies and hard candies is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. The Universal Candy Depositor comes with the hopper with heated panels. Comes with 8 Pistons setup with Heavy Duty Nozzles Tabletop Confectionery Depositor The Truffly Made, Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery ingredients such as chocolate and ganache, as well as high heat candy ingredients such as caramel, gummies and hard candy. The Universal Candy Depositor comes with the hopper with heated panels. This Confectionery Depositor has a large hopper with heated panels Easily adjustable shot size control. Eight nozzles have adjustable centerlines to accommodate various mold configurations. The Universal Depositor works with molds up to 11.5 inches wide. Nozzles are removable to accommodate molds with less cavities. Heated panels help chocolate, caramel or gummy products maintain temperature to flow properly. Digital, variable temperature control Additional pistons and nozzles available Heavy Duty nozzles Compact, space saving design CE certified Made in Germany. The Universal Candy Depositor ships with: 8 Pistons assembly Complete Heating System Heavy Duty nozzles stainless steel hopper with cover stainless steel balls aluminum pallet carrier spare o-rings Specifications Width:  15.75” Length:  20.5” Height:  14.5” Weight:  49 lbs Dosage : 1.5 to 7 ml / 0.05 to 0.20 fl oz per pull Capacity : 1.3 gal / 6 liter Filling Capacity: 2,000+ hourly Power Input : 100-240V AC  /  50-60Hz Power Output : 24V DC / max.600W Material: Stainless Steel Maximum Heat : 320°F / 160°C Guarantee:  12 Months from date of purchase. The complete Universal Depositor can be disassembled without tools for cleaning. Instructions for Use

    Read more

    $13,499.00

  • Gumdrop 80 Mold Gumdrop 80 Mold

    Truffly Made Gumdrop 80 Mold

    Gumdrop 80 Mold Candy Mold Specifications: 3.0ml Gumdrop Mold – 80 CavitiesReference: TM-GD-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 10 x 8Cavities Per Mold: 80Cavity Size:  20 x 18 x 12 mm   (0.78″ x  0.70″ x 0.47” )Cavity volume: 3.0 mL  (0.10 fl oz)Approximate Weight: 3.5 – 4.0 grams (0.12 – 0.14 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

    Read more

    $76.95

  • Flat Pin Fittings for Universal Demolder - 80 Count Flat Pin Fittings for Universal Demolder - 80 Count

    Truffly Made Flat Pin Fittings for Universal Demolder - 80 Count

    Flat Pin Fittings for Universal Demolder - 80 Count The pin fittings can be added on the original pins of the Universal Candy Demolder to increase the diameter and improve efficiency of unmolding with larger cavity size molds such as Button 80, Diamond 80, Rounded Triangle 80, or custom molds.Food contact safe and easy to clean using dish soap and hot water. Pins fittings are easy to add on and can be removed for cleaning purposes. Pack of 80 Pin Fittings Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

    Read more

    $331.99

  • Drop 80 Mold Drop 80 Mold

    Truffly Made Drop 80 Mold

    Drop 80 Mold Candy Mold Specifications: 1.85ml Drop Mold – 80 CavitiesReference: TM-DP-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 10 x 8Cavities Per Mold: 80Cavity Size:  12.5 x 14 mm Ø  (0.49″ x  0.55” Ø)Cavity volume: 1.85 mL  (0.06 fl oz)Approximate Weight: 2.0 – 2.5 grams (0.07 – 0.09 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

    Read more

    $76.95

  • Dice 80 Mold Dice 80 Mold

    Truffly Made Dice 80 Mold

    Dice 80 Mold Candy Mold Specifications: Reference: TM-DC-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 8 x 10Cavities Per Mold: 80Cavity Size:   15 x 15 x 15 mm (19/32 x 10/32 x 19/32″)Cavity volume:  3.5 mL  (0.12 fl oz)Approximate Weight: 4 – 4.5 grams (0.14 – 0.16 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.  

    Read more

    $76.95

  • Diamond 80 Mold Diamond 80 Mold

    Truffly Made Diamond 80 Mold

    Diamond 80 Mold Candy Mold Specifications: Reference: TM-DD-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 8 x 10Cavities Per Mold: 80Cavity Size:   10 x 15 x 20 mm (0.39″ x 0.59″ x 0.79″)Cavity volume:  2.0 mL  (0.07 fl oz)Approximate Weight: 2.5 – 3 grams (0.08 – 0.11 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

    Read more

    $76.95

  • Classic Round 80 Mold Classic Round 80 Mold

    Truffly Made Classic Round 80 Mold

    Classic Round 80 Mold Reference: TM-RD-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 8 x 10Cavities Per Mold: 80Cavity Size:  27 dia x 22 mm (1.06 dia x 0.86”)Cavity volume:  11 mL  (0.37 fl oz)Approximate Weight: 13 – 15 grams  (0.45 – 0.53 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.  

    Read more

    $76.95

  • Button 80 Mold Button 80 Mold

    Truffly Made Button 80 Mold

    Button 80 Mold Candy Mold Specifications: Reference: TM-BN-080Mold Size : 292 x 381 mm (11.5” x 15”)Mold Layout: 8 x 10Cavities Per Mold: 80Cavity Size:   21.5mm Ø x 9.5mm (0.85 Ø x 0.37″)Cavity volume:  2.5 mL  (0.085 fl oz)Approximate Weight: 3.0 – 3.5 grams (0.10 – 0.12 oz) Additional information 100% Platinum Cured Silicone Sheet Certified Food Grade and FDA Approved One mold sized to perfectly fill half of an 18 x 26 inch industrial sheet pan Bake or freeze with temperatures from -40°F up to 450°F. Flexible, durable and reliable. High grade silicone with strong resistance to warping, tearing or shrinking and flexible enough to allow for hassle free release of each candy. 12 month Warranty. Truffly Made silicone molds gives a precisely formed shaped candy. Can be used with chocolate, ganache, caramel, gummy, praline and hard candy. Eliminating the need for hand-manufacture and creates uniform candies every time. Truffly Made molds are the most advanced in professional confectionery products making and are the only molds that allows you to easily pop out candies in a one step process. These food grade non-stick silicone candy molds are simple to use, easy to clean, and saves on labor costs. They are designed for commercial use and are temperature resistant from -40°F. to 450°F to allow you to work with blast freezer and oven.

    Read more

    $76.95

  • ChemTek CL5 Centrifuge

    ChemTek ChemTek CL5 Centrifuge

    ChemTek CL5 Centrifuge CL5 centrifuges provide excellent performance and greater capacity. Each unit comes with 2 rotors for (6)500ml or (4)1000ml bucket options. Specifications:  Power Supply: 110V 50/60Hz Max Speed: 5000 RPM Max RCF: 6100xg Max Capacity: 4x1000ml Time Setting Range: Speed Accuracy: ± 10r/min Noise:  65dB Power Consumption: 3 kW Dimensions: Net Weight: 600lbs   Comes with: (20) 50ml Tubes (4) Regular Mouth Basket (4) Wide Mouth Baskets (4) Regular Mouth Stainless Jar Lid/Band (4) Wide Mouth Stainless Jar Lid/Band (4) Five 50ml Tube Holder Inserts (4) Regular Mouth Jar Spacer Inserts (4) Wide Mouth Jar Spacer Inserts (1) 50-pack 5”x 7” Double Stitched Fuge Bags (1) 50-pack 6.5”x 7” Double Stitched Fuge Bags (1) Terp SqueeGee (1) 100-Pack of Large Diamond Grip Gloves

    Read more

    $18,000.00

  • Ai DigiM 20L 300C 1200 RPM Heating & Stirring Mantle - 220V Ai DigiM 20L 300C 1200 RPM Heating & Stirring Mantle - 220V

    View options

    Across International Ai DigiM 20L 300C 1200 RPM Heating & Stirring Mantle - 220V

    Ai DigiM 20L 300C 1200 RPM Heating & Stirring Mantle - 220V Across International heating and stirring mantles come standard with digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds.The DigiM mantle is equipped with two sets of thermocouples for proper temperature and speed detection. The heating jacket is pre-treated before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment.  Model  DigiM20  Electrical requirements  220V 50/60Hz 1-Phase, 2900 watts, 13.2 A  Heating  Ambient to 300°C  Stirring  Min. speed: 110 rpm, max. speed: 1200 rpm  Motor power: 40 watts Motor type: brushless DC motor  Controller  PID control with digital temperature and rotation speed display  External thermocouple  Type: PT100 Cable length: 43 inches Stainless steel probe length: 15 inches Stainless steel probe diameter: 5 mm  Flask holder  Maximum flask capacity: 20 liters Top opening diameter: 14.5 inches Depth: 7.5 inches  Dimensions (WxDxH)  Unit: 20.5 x 20.5 x 13 inches, shipping: 24 x 24 x 18 inches  Weight  Unit: 40 lbs, shipping: 50 lbs  Safety  Thermocouple failure protection  Certification  ETL tested to UL and CSA standards (optional), CE (standard)  Warranty  One year   Standard package    Part description  Quantity Part image  Ai DigiM 20L digital heating & stirring mantle 1 pc   DigiM20: Cable Length: 43”, Probe Length: 15” 1 pc  Internal temperature plug 1 pc    Boss head DigiM20: 2 pcs 2 pcs    Stainless steel support rod DigiM20: 2 pcs 2 pcs    PTFE coated stir bar 2 pcs    PTFE coated magnetic stir bar remover 1 pc   4 prong stainless steel clamp opens to 3 1/2" DigiM20: 2 pcs 2 pcs  User's manual 1 pc

    Read more

    $1,590.00 - $2,140.00

    View options

  • SHEL LAB SMO5 Forced Air Convection Oven 4.9CF SHEL LAB SMO5 Forced Air Convection Oven 4.9CF

    View options

    SHEL LAB SHEL LAB SMO5 Forced Air Convection Oven 4.9CF

    SHEL LAB SMO5 Forced Air Convection Oven 138L The SMO5 is equipped with a stainless-steel interior for long-life operation and easy cleaning. With triple wall construction, this oven’s walls minimize external wall temperature which meets CE requirements to keep work spaces cool. These ovens are recommended for critical and analytical use in laboratory and pilot plant product research. Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing.   This unit has a quick ramp-up time to 306°C for faster cycle times. This unit includes an advanced PID temperature control system for sensitive response. The SMO5 forced air oven delivers precise uniformity, air distribution, and the peace of mind expected of the SHEL LAB brand.   Features of this oven include: Embedded Microprocessor Control with Countdown Timer Horizontal Forced Airflow 1.75in (45 mm) Access Port UL/CSA Approved CE Approval DIN 12880 Compliant 24 Month Limited Warranty Includes 2 Shelves. Holds 9 Total Temperature Range +20°C to 306°C Temperature Uniformity ± 5.4°C at 306°C Temperature Range Ambient +20°C to 306°C Temperature Uniformity ± 0.6°C at 80°C ± 1.7°C at 150°C ± 3°C at 306°C Temperature Stability ± 0.2°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 8 Minutes 150°C: 22.5 Minutes 306°C: 139 Minutes Volume 138.0L (4.9 cu. ft.) Shelves 2 Max. Shelf Capacity 9 Max. Shelf Load 50.0 lb. (22.6 kg) Access Port 1.75 in. (45 mm) Interior Dimensions (W x D x H) 21.0 x 19.4 x 20.7 in. (53.3 x 49.4 x 52.7 cm) Exterior Dimensions (W x D x H) 31.4 x 28.1 x 38.8 in. (79.8 x 71.4 x 98.6 cm) Weight 208.0 lb. (94.3 kg) Electrical Requirements 110-120V AC, 50/60Hz, 14.0A

    Read more

    $4,200.00 - $4,250.00

    View options

  • SHEL LAB SMO3 Forced Air Convection Oven 3CF SHEL LAB SMO3 Forced Air Convection Oven 3CF

    View options

    SHEL LAB SHEL LAB SMO3 Forced Air Convection Oven 3CF

    SHEL LAB SMO3 Forced Air Convection Oven 85L The SMO3 has a quick ramp-up time to 306°C for faster cycle times. This unit includes an advanced PID temperature control system for sensitive response. These ovens are recommended for critical and analytical use in laboratory and pilot plant product research. Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing.   This unit is equipped with a stainless-steel interior for long-life operation and easy cleaning. Its triple wall construction minimizes external wall temperature which meets CE requirements to keep workspaces cool. The SMO3 forced air oven delivers precise uniformity, air distribution, and the peace of mind expected of the SHEL LAB brand.   Features of this oven include: Embedded Microprocessor Control with Countdown Timer Horizontal Forced Airflow 1.75in (45mm) Access Port UL/CSA Approved CE Approval DIN 12880 Compliant 24 Month Limited Warranty Includes 2 Shelves. Holds 7 Total Temperature Range +20°C to 306°C Temperature Uniformity ± 5.4°C at 306°C Options: SMO3: OVEN, FORCED AIR, 3 CU FT, 115V SMO3-2: OVEN, FORCED AIR, 3 CU FT, 230V Temperature Range Ambient +20°C to 306°C Temperature Uniformity ± 0.4°C at 80°C ± 1.8°C at 150°C ± 3.2°C at 306°C Temperature Stability ± 0.3°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 6 Minutes 150°C: 27 Minutes 306°C: 81 Minutes Volume 85.0L (3.0 cu. ft.) Shelves 2 Max. Shelf Capacity 7 Max. Shelf Load 50.0 lb. (22.6 kg) Access Port 1.75 in. (45 mm) Interior Dimensions (W x D x H) 16.5 x 19.5 x 16.2 in. (41.9 x 49.5 x 41.2 cm) Exterior Dimensions (W x D x H) 26.9 x 28.6 x 34.0 in. (68.4 x 72.7 x 84.0 cm) Weight 170.5 lb. (77.3 kg) Electrical Requirements 110-120V AC, 50/60Hz, 14.0A

    Read more

    $3,500.00 - $3,550.00

    View options

  • SHEL LAB SMO1 Forced Air Convection Oven 1.4CF SHEL LAB SMO1 Forced Air Convection Oven 1.4CF

    View options

    SHEL LAB SHEL LAB SMO1 Forced Air Convection Oven 1.4CF

    SHEL LAB SMO1 Forced Air Convection Oven 39.4L The SMO1 has a quick ramp-up time to 306°C for faster cycle times. This unit includes an advanced PID temperature control system for sensitive response.   These ovens are recommended for critical and analytical use in laboratory and pilot plant product research. Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing.   This unit is equipped with a stainless-steel interior for long-life operation and easy cleaning. Its triple wall construction minimizes external wall temperature which meets CE requirements to keep work spaces cool.   The SMO1's forced air ovens deliver precise uniformity, air distribution and the peace of mind expected of the SHEL LAB brand.   Features of this oven include: Embedded Microprocessor Control with Countdown Timer Horizontal Forced Airflow 1.75in (45 mm) Access Port UL/CSA Approved CE Approval DIN 12880 Compliant 24 Month Limited Warranty Includes 2 Shelves. Holds 6 Total Temperature Range +20°C to 306°C Temperature Uniformity ± 5.4°C at 306°C Options: SMO1: OVEN, FORCED AIR, 1.4 CU FT, 115V SMO1-2: OVEN, FORCED AIR, 1.4 CU FT, 230V Temperature Range Ambient +20°C to 306°C Temperature Uniformity ± 0.5°C at 80°C ± 1.2°C at 150°C ± 5.4°C at 306°C Temperature Stability ± 0.3°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 5.5 Minutes 150°C: 15 Minutes 306°C: 96 Minutes Volume 39.4L (1.4 cu. ft.) Shelves 2 Max. Shelf Capacity 6 Max. Shelf Load 50.0 lb. (22.6 kg) Access Port 1.75 in. (45 mm) Interior Dimensions (W x D x H) 12.1 x 13.7 x 14.5 in. (30.7 x 34.9 x 36.8 cm) Exterior Dimensions (W x D x H) 22.7 x 23.5 x 31.5 in. (57.7 x 59.6 x 80.0 cm) Weight 126.5 lb. (57.4 kg) Electrical Requirements 110-120V AC, 50/60Hz, 12.0A

    Read more

    $3,200.00 - $3,250.00

    View options

  • SHEL LAB SVAC4 Vacuum Oven 4.5CF SHEL LAB SVAC4 Vacuum Oven 4.5CF

    View options

    SHEL LAB SHEL LAB SVAC4 Vacuum Oven 4.5CF

    SHEL LAB SVAC4 Vacuum Oven 127.4L Our revamped SHEL LAB SVAC vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. Vacuum ovens prevent residue accumulation on products and use lower temperatures than typical convection ovens. Your products are processed with minimal impact and maximum throughput.  SHEL LAB vacuum ovens have stainless steel interiors and provide exceptional durability and stability. Available in 4 sizes, SVAC Vacuum Ovens support a diverse array of applications. To achieve required vacuum levels, users can choose from a 3/8-inch orifice or a KF-25 fitting to withstand heavy use and minimize draw-down time. The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples.   SHEL LAB Vacuum Ovens are equipped with silicone gaskets.   Features include: Watlow PM9 Plus Controller Generous Usable Shelf Area Achieve Impressive Vacuum Levels Sizes Range from 0.6 – 4.5 Cubic Feet Built-in Overtemperature Protection 24 Month Limited Warranty Temperature Range Ambient +10°C to 220°C Temperature Stability ± 0.25°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 70 Minutes 150°C: 120 Minutes 220°C: 230 Minutes Operational Vacuum Range 3.0 to 29.9 inHg (101.6 to 1,012.5 mbar) Vacuum Gauge Range 0.0 to 29.9 inHg (0.0 to 1,012.5 mbar) Volume 127.4L (4.50 cu. ft.) Shelves 3 Max. Shelf Capacity 6 Max. Shelf Load 35.0 lb. (15.8 kg) Interior Dimensions (W x D x H) 18.0 x 24.0 x 18.0 in. (45.7 x 61.0 x 45.7 cm) Exterior Dimensions (W x D x H) 27.0 x 35.2 x 32.8 in. (68.6 x 89.5 x 83.3 cm) Weight 317.0 lb. (144.0 kg) Electrical Requirements 115V AC, 50/60Hz, 13.0A

    Read more

    $13,500.00 - $13,575.00

    View options

  • SHEL LAB SVAC2 Vacuum Oven 1.67CF SHEL LAB SVAC2 Vacuum Oven 1.67CF

    View options

    SHEL LAB SHEL LAB SVAC2 Vacuum Oven 1.67CF

    SHEL LAB SVAC2 Vacuum Oven 47.2L Our revamped SHEL LAB SVAC vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials.   Vacuum ovens prevent residue accumulation on products and use lower temperatures than typical convection ovens. Your products are processed with minimal impact and maximum throughput.    SHEL LAB vacuum ovens have stainless steel interiors and provide exceptional durability and stability. Available in 4 sizes, SVAC Vacuum Ovens support a diverse array of applications.To achieve required vacuum levels, users can choose from a 3/8-inch orifice or a KF-25 fitting to withstand heavy use and minimize draw-down time.   The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples.   SHEL LAB Vacuum Ovens are equipped with silicone gaskets.   Features include: Watlow PM9 Plus Controller Generous Usable Shelf Area Achieve Impressive Vacuum Levels Sizes Range from 0.6 – 4.5 Cubic Feet Built-in Overtemperature Protection 24 Month Limited Warranty Please note that this vacuum oven does not include a pump or related accessories. Contact your SHEL LAB distributor for assistance with choosing the ideal pump and accessories for any application. Temperature Range Ambient +10°C to 220°C Temperature Stability ± 0.1°C at 150°C Heat Up Times (From Ambient 20°C) 80°C: 70 Minutes 150°C: 120 Minutes 220°C: 200 Minutes Operational Vacuum Range 3.0 to 29.9 inHg (101.6 to 1,012.5 mbar) Vacuum Gauge Range 0.0 to 29.9 inHg (0.0 to 1,012.5 mbar) Volume 47.2L (1.67 cu. ft.) Shelves 3 Max. Shelf Capacity 3 Max. Shelf Load 35.0 lb. (15.8 kg) Interior Dimensions (W x D x H) 12.0 x 20.0 x 12.0 in. (30.4 x 50.8 x 30.4 cm) Exterior Dimensions (W x D x H) 20.8 x 31.3 x 26.8 in. (52.8 x 79.5 x 68.1 cm) Weight 182.0 lb. (83.0 kg) Electrical Requirements 115V AC, 50/60Hz, 10.0A

    Read more

    $7,050.00 - $7,150.00

    View options

  • SHEL LAB SVAC2E Economy Vacuum Oven 1.67CF SHEL LAB SVAC2E Economy Vacuum Oven 1.67CF

    View options

    SHEL LAB SHEL LAB SVAC2E Economy Vacuum Oven 1.67CF

    SHEL LAB SVAC2E Economy Vacuum Oven 47.2L, 115V SHEL LAB vacuum ovens provide exceptional capabilities for fast and gentle drying of heat-sensitive materials. They prevent residue accumulation on products and allow safe drying of materials at lower temperatures than typically required when using convection ovens.   These units feature a radiant heating system that optimizes chamber space and provides excellent heat transfer and temperature uniformity. All SHEL LAB vacuum ovens are built with stainless steel chambers that are easy to clean and have exceptional durability.   The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. The tempered glass viewing window allows for safe, continuous monitoring of samples. A selection of gaskets (for specific applications) and a small benchtop footprint increase the versatility of these ovens.      The SHEL LAB economy series of vacuum ovens are outstanding in any application. Features include: Analog Temperature Control Stainless-Steel Interior Built-in Overtemperature Protection 24 Month Limited Warranty Temperature Range Ambient +15°C to 210°C Temperature Uniformity ± 9°C at 110°C Temperature Stability ± 0.5°C at 100°C Heat Up Times (From Ambient 20°C) 80°C: 30 Minutes 150°C: 45 Minutes 210°C: 120 Minutes Operational Vacuum Range 3.0 to 29.9 inHg (101.6 to 1,012.5 mbar) Vacuum Gauge Range 0.0 to 30.0 inHg (0.0 to 1,015.9 mbar) Volume 47.2L (1.67 cu. ft.) Shelves 2 Max. Shelf Capacity 2 Max. Shelf Load 35.0 lb. (15.8 kg) Interior Dimensions (W x D x H) 12.0 x 20.0 x 12.0 in. (30.4 x 50.8 x 30.4 cm) Exterior Dimensions (W x D x H) 18.5 x 27.8 x 25.3 in. (47.0 x 70.5 x 64.1 cm) Weight 108.0 lb. (49.0 kg) Electrical Requirements 115V AC, 50/60Hz, 10.0A

    Read more

    $2,950.00 - $3,000.00

    View options

  • ChemTek - Snow Queen Oil Filtration

    ChemTek ChemTek - Snow Queen Oil Filtration

    ChemTek - Snow Queen Oil Filtration Create isolate in minutes Redissolve and reformulate Dual Mixer

    Read more

    $27,000.00

  • Huber Unistat T402 with Pilot ONE Huber Unistat T402 with Pilot ONE

    View options

    Huber Huber Unistat T402 with Pilot ONE

    Huber Unistat T402 with Pilot ONE    The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen color display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapors and oxidation, further saving resources. Unistats are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated.     Precise and reproducible temperature control results   Wide temperature ranges with no fluid change   Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation Adaptive temperature control, self-optimizing  Efficient circulation pump 2 x USB (Host and Device), Ethernet and RS232 interfaces   Efficient operation saves working time and operating costs  Proven functionality for the process industry  E-grade "Professional" included   General Information & Temperature Controller Temperature range 65...300 °C Temperature stability ±0.05 °C Temperature control TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C Alarm message optical, acoustical Controller Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 505 x 400 x 765 mm | 19.88 x 15.75 x 30.12 inches Weight 54 kg | 119.07 pounds Heating / Cooling Capacity Heating capacity 4,8 kW Circulation Pump Pressure pump max. 45 lpm ; 0.9 bar | 11.89 gpm ; 13.05 psi Pump connection M24x1,5 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old sku 1038.0004.01 Permissible ambient temp. 5 to 40 °C Filling volume min. 1.45 Liters | 0.38 gal Volume of expansion 2.8 Liters | 0.74 gal Power supply 208V 3~ 60Hz Cooling water Connection G1/2 AG

    Read more

    $55,650.00 - $56,150.00

    View options

  • Huber Unistat Tango with Pilot ONE Huber Unistat Tango with Pilot ONE

    View options

    Huber Huber Unistat Tango with Pilot ONE

    Huber Unistat Tango with Pilot ONE (Please Note: There is  2-3  weeks Shipping  lead time)          Unistats are predestined for applications in process and chemical engineering, such as temperature control of reactors, autoclaves, Miniplant/Pilot systems, reactor blocks and calorimeters. Unistat temperature control systems with their unique thermodynamics provide highly accurate and reproducible results, guaranteeing the shortest heating and cooling times and a wide temperature range without fluid change. Environmentally and economically Unistats stand out, offering natural refrigerants and an efficient energy management system for reduced operating costs. .  Precise and reproducible temperature control results Fastest heating and cooling rates Wide temperature ranges with no fluid change Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation Adaptive temperature control, self-optimising Efficient circulation pump 2 x USB (Host and Device), Ethernet and RS232 interfaces Efficient operation saves working time and operating costs Proven functionality for the process industry E-grade "Professional" included      Download Data sheet Unistat tango  Download Data Sheet Unistat tango w Download Data Sheet Unistat tango wl Operating Manual  Click here 3 year Warranty Register    General Information & Temperature Controller Unistat Tango Unistat Tango w Unistat Tango wl Temperature range -45...250 °C -45...250 °C -45...250 °C Temperature stability ±0.01 °C ±0.01 ±0.01 °C Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C 0.01 °C 0.01 °C Alarm message optical, acoustical optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL III / FL Protection class IP20 IP20 IP20 Dimensions (W x D x H) 16.77 x 12.87 x 24.84 inches 16.77 x 12.87 x 24.84 inches 16.77 x 12.87 x 24.84 inches Weight 141.12 pounds 119.07 pounds 132.3 pounds Heating / Cooling Capacity Heating capacity 3 kW 3 kW 3 kW Cooling capacity 250 200 100 0 -20 -40 °C0,7 0,7 0,7 0,7 0,4 0,06 kW 250 200 100 0 -20 -40 °C0,7 0,7 0,7 0,7 0,4 0,06 kW 250 200 100 0 -20 -40 °C0,7 0,7 0,7 0,7 0,4 0,06 kW Cooling machine air-cooled water-cooled air- and water-cooled Refrigerant R1270 (0,15 kg) R1270 (0,09 kg R1270 (0,15 kg) Circulation Pump Pressure pump max. 55 lpm ; 0.9 bar | 14.53 gpm ; 13.05 psi 55 lpm ; 0.9 bar | 14.53 gpm ; 130.5 psi 55 lpm ; 0.9 bar | 14.53 gpm ; 130.5 psi Pump connection M24x1,5 AG male M24x1,5 AG male M24x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Pt100 Analogue input via optional Com.G@te via optional Com.G@te via optional Com.G@te Analogue outpu via optional Com.G@te via optional Com.G@te via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Operating Data Permissible ambient temp. 5 to 40 °C 5 to 40 °C 5 to 40 °C Noise level 62 dB(A) - 62 dB(A) Filling volume min. 1.5 Liters | 0.4 gal 1.5 Liters | 0.4 gal 1.5 Liters | 0.4 gal Volume of expansion 2.8 Liters | 0.74 gal 2.8 Liters | 0.74 gal 2.8 Liters | 0.74 gal Cooling water connection - G1/2 AG G1/2 AG Cooling water consumption - 24 l/h 30 l/h Cooling water differential pressure min. - 0,5 bar | 72.5 psi 0,5 bar | 72.5 psi Cooling water pressure max. - 6 bar | 87 psi 6 bar | 87 psi Power supply 208V 2~ 60Hz 208V 2~ 60Hz 208V 2~ 60Hz Current max 18 A 16,5 A 17,5 A Fusing 20 A 2x20 A 2x20 A

    Read more

    $33,200.00 - $36,100.00

    View options

  • 5L ECO V2 Rotary Evaporator Motor 5L ECO V2 Rotary Evaporator Motor

    5L ECO V2 Rotary Evaporator Motor

    5L ECO V2 Rotary Evaporator Motor   This replacement motor fits on 5L rotary evaporators with manual lift baths. The controller connection must have the same 5 pin configuration as the plug shown in the pictures.

    Read more

    $425.00

  • 5L ECO V2 Rotary Evaporator Speed Controller Box 5L ECO V2 Rotary Evaporator Speed Controller Box

    5L ECO V2 Rotary Evaporator Speed Controller Box

    5L ECO V2 Rotary Evaporator Speed Controller Box This is a replacement speed controller for 5L rotary evaporators with a manual lift bath. The cord attaching to your motor must have the same 5 pin orientation shown in the pictures.

    Read more

    $350.00

  • ChemTek CHT210R Centrifuge

    ChemTek ChemTek CHT210R Centrifuge

    ChemTek CHT210R Centrifuge CHT210R centrifuges provide excellent performance and easy operation in a compact design that saves valuable time and laboratory space. Each unit comes with 2 rotors for high speed(20x15ml) or large capacity94x750ml) options for refrigerated centrifuging. Specifications: Power Supply: 110V 50/60Hz Max Speed: 21,000 RPM Max RCF: 32, 752 x G Max Capacity:4x750ml Cooling Capacity: -20C to -40C Time Setting Range: 1 - 99min Speed Accuracy: ± 10r/min Noise: ≤65dB Power Consumption: 6Kw Net Weight: 170lbs Comes with: (20) 50ml Tubes (4) Regular Mouth Basket (4) Wide Mouth Baskets (4) Regular Mouth Stainless Jar Lid/Band (4) Wide Mouth Stainless Jar Lid/Band (4) Five 50ml Tube Holder Inserts (4) Regular Mouth Jar Spacer Inserts (4) Wide Mouth Jar Spacer Inserts (1) 50-pack 5”x 7” Double Stitched Fuge Bags (1) 50-pack 6.5”x 7” Double Stitched Fuge Bags (1) Terp SqueeGee (1) 100-Pack of Large Diamond Grip Gloves (1) Power converter

    Read more

    $13,200.00

  • Huber Unistat T330 with Pilot ONE Huber Unistat T330 with Pilot ONE

    Huber Huber Unistat T330 with Pilot ONE

    Huber Unistat T330 with Pilot ONE   The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen colour display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapours and oxidation, further saving resources. Unistats are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated.       General information & temperature controller Temperature range 65...300 °C Temperature stability ±0,01 °C Temperature control TAC, self-optimizing (True Adaptive Control) Display resolution 0,01 °C Alarm message optical, acoustical Controller Pilot ONE (E-grade "Professional") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 540 x 678 x 1174 mm Weight -- kg Heating / cooling capacity Heating capacity 21 - 24 kW Circulation pump Pressure pump max. 96 l/min ; 3,5 bar Pump connection M30x1,5 AG male Permissible viscosity 50 mm²/s Pump speed adjustable Yes Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating data Permissible ambient temp. 5...40 °C Volume of expansion 24 Litres Power supply 380-460V 3~ 50/60Hz

    Read more

    $73,700.00

  • Chemglass Adapter, Bushing

    Chemglass Chemglass Adapter, Bushing

    Chemglass Adapter, Bushing   Chemglass Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.    __________________________________________________________________________________________ ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.*** ***All units are inspected for broken glass or parts before unit is shipped. If unit arrives damaged or glass is broken (this does not include minor imperfections or scuffs in glassware), Customer MUST contact BVV™ within 3 days of delivery to file a claim and receive a replacement part. If customer DOES NOT contact BVV™ within 3 days of delivery responsibility for replacement parts falls on the customer and they must pay for replacement pieces

    Read more

    $53.00

  • Huber Unistat 510 with Pilot ONE 460V 3~ 60Hz Huber Unistat 510 with Pilot ONE 460V 3~ 60Hz

    View options

    Huber Huber Unistat 510 with Pilot ONE 460V 3~ 60Hz

    Huber Unistat 510 with Pilot ONE   The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen color display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapours and oxidation, further saving resources. Unistats are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated.   The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favorite menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission.   FEATURES: Precise and reproducible temperature control results        Fastest heating and cooling rates                Wide temperature ranges with no fluid change     Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation         Adaptive temperature control, self-optimizing       Efficient circulation pump                2 x USB (Host and Device), Ethernet and RS232 interfaces                 Efficient operation saves working time and operating costs              Proven functionality for the process industry          E-grade "Professional" include   Data Sheet 3 Year Warranty Extension Notes on Installation      General information & temperature controller Temperature range -50...250 °C Temperature stability ±0.01 °C Temperature stability TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C Alarm message optical, acoustical Controller Pilot ONE (E-grade "Professional") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 560 x 754 x 1457 mm | 22.05 x 29.68 x 57.36 inches Weight 233 kg | 513.76 pounds Heating / cooling capacity Heating capacity 6 kW Cooling capacity 250 200 100 0 -20 -40 -50 C5,3 5,3 5,3 5,3 2,8 0,9 0,25 kW Cooling machine air-cooled Refrigerant (ASHRAE, GHS) R452A (A1, H280) (2,8 kg) Circulation pump Pressure pump max. 112 lpm ; 1.5 bar | 29.59 gpm ; 21.75 psi Pump connection M30x1,5 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating data Permissible ambient temp. 5...40 °C Filling volume min. 4.1 Liters | 1.08 gal Volume of expansion 5.5 Liters | 1.45 gal Power supply 460V 3~ 60Hz Current max. 16 A

    Read more

    $68,300.00 - $68,800.00

    View options

  • Huber Unistat 510 with Pilot ONE 208V 3~ 60Hz Huber Unistat 510 with Pilot ONE 208V 3~ 60Hz

    View options

    Huber Huber Unistat 510 with Pilot ONE 208V 3~ 60Hz

    Huber Unistat 510 with Pilot ONE   The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen color display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapours and oxidation, further saving resources. Unistats are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated.   The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favorite menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission.   FEATURES: Precise and reproducible temperature control results        Fastest heating and cooling rates                Wide temperature ranges with no fluid change     Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation         Adaptive temperature control, self-optimising       Efficient circulation pump                2 x USB (Host and Device), Ethernet and RS232 interfaces                 Efficient operation saves working time and operating costs              Proven functionality for the process industry          E-grade "Professional" include    Data Sheet  3 Year Warranty Extension  Note of Installation    General information & temperature controller Temperature range -50...250 °C Temperature stability ±0.01 °C Temperature stability TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C Alarm message optical, acoustical Controller Pilot ONE (E-grade "Professional") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 560 x 754 x 1457 mm | 22.05 x 29.68 x 57.36 inches Weight 348 kg | 767.34 pounds Heating / cooling capacity Heating capacity 6 kW Cooling capacity 250 200 100 0 -20 -40 -50 C5,3 5,3 5,3 5,3 2,8 0,9 0,25 kW Cooling machine air-cooled Refrigerant (ASHRAE, GHS) R452A (A1, H280) (2,8 kg) Circulation pump Pressure pump max. 112 lpm ; 1.5 bar | 29.59 gpm ; 21.75 psi Pump connection M30x1,5 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating data Permissible ambient temp. 5...40 °C Filling volume min. 4.1 Liters | 1.08 gal Volume of expansion 5.5 Liters | 1.45 gal Power supply 208V 3~ 60Hz Current max. 36 A

    Read more

    $82,950.00 - $83,450.00

    View options

  • Sale -50% Glas-Col 2 L Stir Mantle

    Glas-Col Glas-Col 2 L Stir Mantle

    Glas-Col 2 L Stir Mantle Specifications Material aluminum housed Max temperature C 400 Height (in) 6 Outside Diameter (od)(in) 12 Capacity 2 L Volts 115 Watts 500 Includes: Separable 4-ft., 2-wire cord and locking connector.

    Read more

    $1,100.00 $550.00

  • Sale -33% Glas-Col Thermocouple Type "J"

    Glas-Col Glas-Col Thermocouple Type "J"

    1/4" x 12" 72" leads, mini plug

    Read more

    $135.00 $90.00

  • Sale -44% Candyworx Depositmore™ JR - Gummy Depositor USA Made Candyworx Depositmore™ JR - Gummy Depositor USA Made

    CandyWorx Candyworx Depositmore JR - Gummy Depositor USA Made

    An efficient, repeatable, flexible depositor for “anything that pours!” This single pump unit is capable of 720-1020* pieces per hour. Works great for dispensing gelatin based product, soft candy, chocolate, and more! The DM JR includes heated components to prevent any clogging and its easy-to-build design makes disassembly a breeze. The unit can be operated both automated or manually. Made in the USA.  Check out our Cut Sheet for more info! Depositmore™ Cut Sheet

    Read more

    $8,000.00 $4,500.00

  • So-Low Flammable Material Storage Freezer 4.5 Cubic Feet MV23-4UCFMSF

    So-Low So-Low Flammable Material Storage Freezer 4.5 Cubic Feet MV23-4UCFMSF

    So-Low Flammable Material Storage Freezer 4.5 Cubic Feet MV23-4UCFMSF Please note: This Product may carry up to an 8 week lead time!     Description: Flammable Freezers are designed to meet National Fire Protection Agency  NFPA and OSHA guidelines for the frozen (-20°C) storage of flammable (volatile) material storage in general laboratory work areas.Upright and undercounter models. Designed exclusively to control flammable material, The So-Low Flammable Material Storage Freezers and Refrigerators are ideal for storage of any flammable material products. There are no electrical components located in the interior of the unit and the compressor's electrical components have been sealed in a vapor-proof enclosure for additional safety.  Units are supplied with a power cord to ease installation. Temperature control and temperature recorder options allow for an individualized intensity of temperature control and monitoring. Adjustable legs and shelves add more availability and storage options to fit your laboratories needs. Features: Solid Polyurethane Foam Insulated Doors Epoxy Coated Shelves Adjustable Shelves Adjustable Legs CFC-Free Refrigerant and Insulation  Adjustable Thermostat  Manual Defrost UL Listed   Product Specification Manufacturer So-Low Temperature Range -15°C to -17°C Capacity 4.5 Cubic Fee Exterior w x d x h (inches) 23.625" x 24.25" x 32.187" Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Insulation Polyurethane foam Refrigerant R134A CFC free Compressor 1/5 hp Condenser Static Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 2.5/15 Supply Plug 5-15P NEMA UL listed Shipping weight 150 lbs. Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor.   Specification Data Sheet

    Read more

    $2,500.00

  • Huber Unistat 915w with Pilot ONE Huber Unistat 915w with Pilot ONE

    View options

    Huber Huber Unistat 915w with Pilot ONE

    Huber Unistat 915w with Pilot ONE (Please Note: There is a 2 - 3 weeks lead time)               Unistat Circulators are an ideal solution for fast and precise thermal control of externally connected applications. These systems offer rapid temperature change and a wide temperature range without having to change fluid. The new Pilot ONE controller features a navigation system with easily remembered icons and menus which are sorted by color to make routine work simpler. An amazing software guides you through your set up ensuring all the necessary settings are correct.   Precise and reproducible temperature control results Fastest heating and cooling rate Wide temperature ranges with no fluid change Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation Adaptive temperature control, self-optimising  Efficient circulation pump Data communication via LAN, internet, USB, RS232 and RS485 Efficient operation saves working time and operating costs Proven functionality for the process industry  E-grade "Professional" included     Download Data Sheet  Click Here for 3 Year Warranty Online Registration  Download Operating Manual      General information & Temperature Controller Temperature range -90...250 °C Temperature stability ±0.02 °C ±0.01 °C Temperature control TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C Alarm message optical, acoustical Controller Pilot ONE (E-grade "Professional") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 630 x 704 x 1565 mm | 24.8 x 27.72 x 61.61 inches Weight 364 kg | 802.62 pounds Heating / Cooling Capacity Heating capacity 6 kW Cooling capacity 250 200 100 0 -20 -40 -60 -80 -90 °C 6,5 7,5 9 11 11 11 8,2 4,2 1,3 0,6 kW Cooling machine water-cooled Refrigerant 1. stage R507 (A1, H280) (2,9 kg) Refrigerant 2. stage R23 (A1, H280) (1,23 kg) Circulation Pump Pressure pump max. 110 lpm ; 1.5 bar | 29.06 gpm ; 21.75 psi Pump Connection M30x1,5 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old sku 1055.0011.01 Permissible ambient temp. 5...40 °C Noise level 64 dB(A) Filling volume min. 3.9 Liters | 1.03 gal Volume of expansion 6.5 Liters | 1.72 gal Cooling water connection G3/4 AG Cooling water differential pressure min. 1 bar | 14.5 psi Cooling water pressure max. 6 bar | 87 psi Power supply 460V 3~ 60Hz Current max. 29 A

    Read more

    $152,800.00 - $153,300.00

    View options

  • Polyscience 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled

    View options

    Polyscience Polyscience 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled

    Polyscience 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled Description: 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled Display: LED Connectivity: Optional: RS232, RS485 Working Temperature Range °C: 5° to 35° Temperature Stability °C: ±0.5° Temperature Calibration Capability: 1-point Pump Type: Positive Displacement   Key Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available   Common Specifications Working Temperature Range °F 41° to 95° Working Temperature Range °C 5° to 35° Reservoir Capacity (gallons) 3.5 Reservoir Capacity (liters) 13.25 Reservoir/Tank Material Polyethylene Reservoir Cover Screw-on Cap Cleanable Air Filter Yes Cleanable Fluid Filter Yes Temperature Stability °F ±0.9° Temperature Stability °C ±0.5° Display LED Display Resolution (Read) 0.1 Pump Type Positive Displacement Process Connections 1/2" (F) NPT Over-Temperature Protection / Failsafe Heater Control Yes Reservoir Liquid Level Indicator Yes Reservoir Drain Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 30.5 x 19 x 26 in Overall Dimensions (L x W x H) (cm) 78 x 48 x 66 cm Compressor Size (HP) 1.5 Refrigerant R134a Shipping Weight (pounds) 340.0 Shipping Weight (kilograms) 154.0 Catalog Page Number 104     Hz (Hertz) 60 Hz Only 50 Hz Only Part Number 6860P46A270D 6850P46A270E Maximum Pressure (psi) 100.0 83.0 Maximum Pressure (bar) 6.90 5.72 Maximum Pressure Flow Rate (gpm) 3.50 2.90 Maximum Pressure Flow Rate (l/min) 13.2 11.0 Cooling Capacity @ +10°C (W) 4420 3715 Cooling Capacity @ +20°C (W) 5200 4371 Cooling Capacity @ +30°C (W) 5980 5027 Heater Wattage 1000 1000 Electrical Requirements (VAC/Hz/Ph/A) 230/60/1/21.1 240/50/1/20.8 Regulatory Approvals TUV CSA, CUL, CE

    Read more

    $10,700.00

    View options

  • HUBER Unistat 905 Dynamic Temperature Control / Circulation Thermostat HUBER Unistat 905 Dynamic Temperature Control / Circulation Thermostat

    View options

    Huber HUBER Unistat 905 Dynamic Temperature Control / Circulation Thermostat

    HUBER Unistat 905 Dynamic Temperature Control  (Please Note: There is 8 week shipping lead time) Disclaimer: This item is Non-Refundable once ordered. Unistat Circulators are an ideal solution for fast and precise thermal control of externally connected applications. These systems offer rapid temperature change and a wide temperature range without having to change fluid. The new Pilot ONE controller features a navigation system with easily remembered icons and menus which are sorted by color to make routine work simpler. An amazing software guides you through your set up ensuring all the necessary settings are correct.   Unistat 905 208V Data sheet  Unistat 905 460V Data sheet      General Information & Temperature Controller Unistat 905 208V Unistat 905 460V Temperature range -90 to 250 °C -90 to 250 °C Temperature stability ±0.01 °C ±0.01 Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C 0.01 °C Alarm message optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL Protection class IP20 IP20 Dimensions (W x D x H) 540 x 654 x 1738 mm | 21.26 x 25.75 x 68.43 inches 540 x 654 x 1500 mm | 21.26 x 25.75 x 59.06 inches Weight 396 kg | 873.18 pounds 275 kg | 606.38 pounds Heating / Cooling Capacity Heating capacity 6 kW 6 kW Cooling machine air-cooled air-cooled Refrigerant 1. stage R452A (A1, H280) (2,5 kg) R452A (A1, H280) (2,5 kg) Refrigerant 2. stage R23 (A1, H280) (0,75 kg) R23 Circulation Pump Pressure pump max. 48 lpm ; 0.9 bar | 12.68 gpm ; 13.05 psi 10.57 gpm ; 13.05 psi Pump connection M30x1,5 AG male M30x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Analogue input via optional Com.G@te via optional Com.G@te Analogue output via optional Com.G@te via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Operating Data Old sku 1035.0013.01 1035.0014.01 Permissible ambient temp. 5...35 °C 5...35 °C Filling volume min. 3.2 Liters | 0.85 gal 3.2 Liters | 0.85 gal Volume of expansion 5.3 Liters | 1.4 gal 5.3 Liters | 1.4 gal Power supply 208V 3~ 60Hz 460V 3~ 60Hz Current max 40 A 23,5 A

    Read more

    $118,100.00 - $131,900.00

    View options

  • So-Low -85°C Ultra-Low Upright Freezer - 22 Cubic Ft. So-Low -85°C Ultra-Low Upright Freezer - 22 Cubic Ft.

    View options

    So-Low So-Low -85°C Ultra-Low Upright Freezer - 22 Cubic Ft.

    So-Low -85°C Ultra-Low Upright Freezer - 22 Cubic Ft. Please note: This Product may carry up to an 8 week lead time!    So-Low Ultra-Low Upright Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low U85-22 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch.   Product Specifications Temperature Control Digital Control with two temperature displays. One display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Dimensions: Exterior: 43" x 37" x 79.25" Interior: 28.5" x 26" x 51.25" Capacity 22 Cubic Ft. / 626 Liters Temperature Range -40°C to -85°C / -40°F to -121°F Shelving 4 Adjustable Shelves (5 Compartments) Inventory Rack Capacity 25 Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval     Specification Data Sheet   Diagram Data Sheet

    Read more

    $11,600.00

    View options

  • So-Low -85°C Ultra-Low Upright Freezer - 13 Cubic Ft. So-Low -85°C Ultra-Low Upright Freezer - 13 Cubic Ft.

    View options

    So-Low So-Low -85°C Ultra-Low Upright Freezer - 13 Cubic Ft.

    So-Low -85°C Ultra-Low Upright Freezer - 13 Cubic Ft. Please note: This Product may carry up to an 8 week lead time!  So-Low Ultra-Low Upright Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low U85-13 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Product Specifications Temperature Control Digital Control with two temperature displays. One display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing feature, and battery test feature. Dimensions: Exterior: 35" x 34.5" x 79.5" Interior: 20" x 22" x 51.25" Capacity 13 Cubic Ft. / 370 Liters Temperature Range -40°C to -85°C / -40°F to -121°F Shelving 4 Adjustable Shelves (5 Compartments) Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 208/60/1 - 230/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval   Specification Data Sheet   Diagram Data Sheet

    Read more

    $10,300.00

    View options

  • So-Low -85°C Ultra-Low Chest Freezer - 22 Cubic Ft.

    View options

    So-Low So-Low -85°C Ultra-Low Chest Freezer - 22 Cubic Ft.

    So-Low -85°C Ultra-Low Chest Freezer - 22 Cubic Ft. Please note: This Product may carry up to an 8 week lead time!    So-Low Ultra-Low Chest Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low C85-22 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch.     Product Specifications Temperature Control Digital Control with two temperature displays. One display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Dimensions: Exterior: 98" x 36" x 43.5" Interior: 67" x 19" x 30" Capacity 22 Cubic Ft. / 626 Liters Temperature Range -40°C to -85°C / -40°F to -121°F Shelving N/A Inventory Rack Capacity 36 Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval   Specification Data Sheet   Diagram Data Sheet

    Read more

    $16,900.00

    View options

  • So-Low -85°C Ultra-Low Chest Freezer - 14 Cubic Ft.

    View options

    So-Low So-Low -85°C Ultra-Low Chest Freezer - 14 Cubic Ft.

    So-Low -85°C Ultra-Low Chest Freezer - 14 Cubic Ft. Please note: This Product may carry up to an 8 week lead time!    So-Low Ultra-Low Chest Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low C85-14 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch.   Product Specifications Temperature Control Digital Control with two temperature displays. One display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Dimensions: Exterior: 72.5" x 33" x 47.5" Interior: 62" x 20" x 20" Capacity 14 Cubic ft. / 400 Liters Temperature Range -40°C to -85°C / -40°F to -121°F Shelving N/A Inventory Rack Capacity 30 Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval      Specification Data Sheet   Diagram Data Sheet

    Read more

    $10,900.00

    View options

  • The Press Club 3" x 5" Easy Drip Rosin Press

    View options

    The Press Club The Press Club 3" x 5" Easy Drip Rosin Press

    3" x 5" Easy Drip Rosin Press  Available in two sizes (3” x 5” and 4” x 7”), each press is thoughtfully designed and handcrafted by top solventless experts in the industry. We even developed our own in-house hydraulic ram and pump. WHAT’S INCLUDED WITH EACH KIT -  3" x 5" Rosin Press Kit - 10 Ton Hydraulic Ram / Pump (Hard Case Included), Dual PID Controller, Integrated Easy Drip Tech Tilting Base, Stickers and more 4" x 7" Rosin Press Kit - 20 Ton Hydraulic Ram / Pump (Hard Case Included), Dual PID Controller, Integrated Easy Drip Tech Tilting Base, Stickers and more KEY FEATURES MADE FROM HIGH-QUALITY, INDUSTRIAL-GRADE MATERIALS (Certified American 6061 Aluminum & 304 Stainless Steel) UNDER 45LBS / PORTABLE / TOP HANDLE FOR EASY TRAVELING ULTRA COMPACT & STURDY (measures less than 12” in L x W x H) PATENTED EASY DRIP TECHNOLOGY (go from horizontal to tilted press in less than 3-secs) TOP OF THE LINE INSULATION TO PREVENT HEAT DISSIPATION FROM TOP / BOTTOM PLATES DUAL HEAT CONTROLLER W/ AUTOMATIC SAFETY SWITCH (easily control each top and bottom plate with our easy 2 button set and forget it operation) THE PRESS CLUB BRAND HYDRAULIC RAM / PUMP (HARD CASE INCLUDED) LIFETIME WARRANTY / 2-YEAR WARRANTY ON ELECTRICAL COMPONENTS  HANDMADE IN NORTH AMERICA 1018 Cold Rolled Steel w/ Black Zinc Nickel Plating 6061 Aluminum Plates Press Plates

    Read more

    $3,500.00 - $4,500.00

    View options

  • 20L Turnkey Reactor Kit

    View options

    20L Turnkey Reactor Kit

    20L Turnkey Reactor Kit The BVV 20L Double Jacketed Glass Reactor Kit is the ideal solution for small to medium-sized solvent recovery and decarboxylation applications. This kit includes everything to get you up and running including a Single 20L triple-layer Glass Reactor with Condenser, either a BVV 19L Heated circulator capable of heating to 220C or  a UL-listed Huber CC-315B capable of heating up to 300C, a 1HP Polyscience 6160T for chilling the condenser, a Welch BTpro100 for vacuum, 25ft of 3/8" Gum rubber tubing for vacuum connections, 20ft of reinforced PVC hose for the chiller, 1/2" Stainless Steel JIC Hoses for the heater,  5 Gallons of Therminol Heat transfer fluid and 5 Gallons of Propylene glycol. 20L Double Jacketed Glass Reactor Specifications Glass Material: GG-17 High Borosilicate Glass Internal Volume: 20L 6.75L Jacket Capacity Shelf Material: Aluminum Alloy Homogenizer Power: 110V/60Hz Homogenizer Speed: 0-400 RPM Digital Homogenizer Control Digital temperature probe readout included Double Jacket 3/4" Jacket Connections 1/4" and 3/8" Vacuum Connections Length: 20 in. Width: 30 in. Height: 76 in. Polyscience 6100 1 HP Chiller Specifications 6100 Series 1 HP Chiller with Turbine Pump, 100psi; 13.2l/min Display: LED Working Temperature Range C: -10 to 40 Temperature Stability: +/-0.1 Temperature Calibration Capability: 1-point Pump Type: Turbine Working Temperature Range F: 14 to 104 Working Temperature Range C: -10 to 40 Reservoir Capacity (gallons): 1.11 Reservoir Capacity (liters): 4.2 Reservoir Cover: Screw-on cap Cleanable Air Filter: Yes Cleanable Fluid Filter: Yes Temperature Stability F: +/-0.2 Temperature Stability C: +/-0.1 Display: LED Display Resolution (Read): 0.1 Pump Type: Turbine Process Connections: 1/2" FNPT Over-Temperature Protection / Failsafe Heater Control: Yes Reservoir Liquid Level Indicator: Yes Reservoir Drain: Yes Cool Command Refrigeration Technology: Yes WhisperCool Environmental Control Technology: Yes Maximum Ambient Temperature F: 95 Maximum Ambient Temperature C: 35 Overall Dimensions (LxWxH inches): 27.6 x 14.5 x 22.6 Overall Dimensions (LxWxH cm): 70 x 36.8 x 57.5 Compressor Size (HP): 1 Refrigerant: R134a Shipping Weight (pounds): 199 Shipping Weight (kilograms): 90 Welch BTpro100 Specifications Model BTpro100 Free Air Displacement@60Hz,lpm(CFM) 100(3.5) Ultimate Vacuum Pressure, Torr 6 Maximum Vacuum, in. Hg 29.7 Horsepower, HP (watts) 0.5(390) Built-in adjustable vacuum - Gas Ballast Yes Head Material PTFE Diaphragm PTFE Inlet/outlet Connection NW16 flange1 Agency (National Recognized Lab) cUL Weight, lbs (kg) 40.3(18.3) Overall DimensionsLxWxH in.(cm) 9x15x7(23x38x18) Shipping Weight, lbs(kg) 48.5 (22) Shipping Carton DimensionsLxWxH in.(cm) 18.9x12.6x11.8(48x32x30)    HUBER CC-315B Specifications Common Specifications Temperature range (-20) 28...300 °C Temperature stability ±0.02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 13.19 x 15.04 x 17.05 inches Weight 48.51 pounds Heating / cooling capacity Heating capacity 3 - 3,5 kW Circulation pump Pressure pump max. 25 lpm : 0,7 bar | 6.6 gpm ; 10.15 psi Suction pump max. 18.5 lpm : 0,4 bar | bar 4.89 gpm ; 5.8 psi Pump connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating data Old sku 2007.0003.01 Permissible ambient temp. 5...40 °C Bath opening W x D / BD 10.63 x 5.71 / 7.87 inches Bath volume 15 Liters | 3.96 gal Filling volume min. 11.5 Liters | 3.04 gal Power supply 208V 2~ 60Hz Current max. 16 A Fusing 20 A

    Read more

    $23,500.00 - $31,500.00

    View options

  • BVV 6" Falling Film Evaporator BVV 6" Falling Film Evaporator

    6" Falling Film Evaporator (Up to 24 GPH)

    6" Falling Film Evaporator **This item carries a 2 week build time** Is your lab floor filled with a fleet of rotary evaporators? Looking to increase solvent recovery throughput? Our new and compact 20GPH Falling Film Evaporator (FFE) has the capability to maximize throughput and replace up to five 50L Rotary Evaporators. The BVV™ 20GPH Falling Film Evaporator is designed to evaporate ethanol that has been diluted in crude oil during a filtration or extraction process. By reducing the vapor pressure inside the system and metering the injection valve, the user can set the heat exchangers to the appropriate temperatures to efficiently evaporate solvent from their crude oil. We paired our FFE with reliable equipment that will keep operations running. End users are required to plumb the process inlet and outlet connections for both heat exchangers. They are supplied with 1.5” sanitary tri-clamp connections. BVV™ can assist with necessary parts needed for a permanent or temporary installation. Temporary installations may be necessary if your lab has limited fume hoods or space which is shared with other processing equipment. Below you will find key features, additional equipment included with the system and the power requirements for each, and real-life efficiencies that were tested. Key Features: · Compact rack design for use in fume hoods (39”x30”x75.5”) · Vernier scale metering valve for controlled injection · Accurate heater and chiller temperature control · Deep vacuum for effective solvent removal · Discharge pumps to eliminate constant reservoir draining and down time · Chemical resistant vacuum pump · Adaptable discharge outlets to customer preference · Insulation to limit thermal loses and reduce condensation (Not Pictured) · Sanitary tri-clamp and compression fittings · Pre-heat injection coil · Injection distribution plate · Tube in shell heat exchanger for efficient evaporation and condensation · Packable vapor path for reduction of contaminants and cleaner separation · Water reservoir for priming the heating system and expansion during operation Crude Discharge Pump Easily control discharge speed and collect your extract directly from the 3/8" tube via a collection vessel or swage on a fitting of your preference to pump collected extract to a secondary location. Eliminate constant reservoir draining and operate continuously. Metered Solvent Injection Effectively repeat efficiency and throughput with our vernier scale metering valve. Easy to dial in the desired efficiency and throughput desired by the user. Distribution Plate Directs the injected solvent to be evenly distributed across all tubes in the heat exchanger which maximizes the effective heating surface area. Solvent Discharge and Vacuum Pump The solvent discharge pump eliminates the need for a reservoir and allows you to pump recovered solvent to any desired secondary location. The vacuum pump manifold gives you easy vacuum control during the complete operation.   POWER REQUIREMENTS The equipment listed below is included with the system. Check power requirements and amp draw prior to purchasing. Equipment Purpose Power Requirement Amp Draw Notes 2GPM Ethanol Recovery Pump for Vacuum Pump for Ethanol Recovery Discharge 230V 1-Phase 2.4 2GPM Max Flow Rate, Vacuum Check Valve Beaker and Wrench Explosion Proof Oil Pump Pump for Oil Recovery Discharge 230V 1-Phase 1.1 90L/hr. Max Flow Rate, Vacuum Check Valve Welch BTpro100 Diaphragm Pump Vacuum Pump for System 115 1-Phase 3.4 3.5 CFM, 6 Torr Ultimate Vacuum Total Amp Draw 6.9   EFFICIENCY We are proud to present real data with running parameters and efficiencies that reflect the actual operation of our system. Below you will find the tested throughputs and efficiencies that our FFE is capable of handling. Throughput 11 GPH 18 GPH 20 GPH 22 GPH 24 GPH Efficiency 98% 97% 94% 90% 85% ** Efficiency calculated at 10:1 ratio (Ethanol : Crude Oil) with heater temperature of 160°F. Crude is fully dewaxed when going into the falling film evaporator. Solution starts at room temperature. Speeds may differ based on dilution ratio, crude quality, and running parameters. ** BVV 6" Falling Film Evaporator Cutsheet

    Read more

    $30,500.00

You have seen 624 out of 624 products

Back to top

Closed Loop Extractors, Vacuum Ovens, Solvent Recovery Equipment

We make it easy to achieve peak performance and purity with our selection of botanical extraction equipment. All of our closed loop extractors are engineered for efficiency and reliability, ideal for professionals seeking high-yield, solvent-based extraction systems. Pair your extractor with our high-performance vacuum ovens, designed to gently remove residual solvents while preserving the integrity of your final product.

We also carry useful equipment like purification and solvent recovery systems that allows you to refine your product while reclaiming and reusing solvents efficiently, saving you time and resources during the extraction process. Whether you're operating a small-scale lab or a full production facility, BVV has the advanced tools and supplies you need for successful botanical processing.

Login

Forgot your password?

Don't have an account yet?
Create account