Shop Components

722 products

Show previous products

  • Sale -50% Glas-Col Vapor Monitor

    Glas-Col Glas-Col Vapor Monitor

    Glas-Col Vapor Monitor motor vapor temperature or other processes  audible alarm - high, low, t/c break  digital display  Specifications TC Type "J" MUST BE ORDERED SEPARATELY Range 0 - 999 C Dimensions 4" W x 4" D x 4" H Volts 120 Includes: 6' attached power cord and grid support bracket

    Read more

    $250.00 $125.00

  • Pump Part - MVP - 60 PSI & Liquid - Alignment Housing Kit

    Master Vapor Pumps Pump Part - MVP - 60 PSI & Liquid - Alignment Housing Kit

    Pump Part - MVP - 60 PSI & Liquid - Alignment Housing Kit All sales final

    Read more

    $439.00

  • Pump Part - MVP - 60 PSI & Liquid - Spider Coupler

    Master Vapor Pumps Pump Part - MVP - 60 PSI & Liquid - Spider Coupler

    Pump Part - MVP - 60 PSI & Liquid - Spider Coupler All sales final

    Read more

    $190.00

  • Pump Part - MVP - Liquid - Stainless Steel Seat

    Master Vapor Pumps Pump Part - MVP - Liquid - Stainless Steel Seat

    Pump Part - MVP - Liquid - Stainless Steel Seat All sales final

    Read more

    $358.00

  • Beaker and Wrench Explosion Proof Oil Pump Beaker and Wrench Explosion Proof Oil Pump

    Beaker and Wrench Explosion Proof Oil Pump

    Explosion Proof Oil Pump Optimized for Falling Film Evaporators C1D2 VFD (variable frequency drive, not C1D2 rated) cord is approximately 15′ Motor: 1/4 Horsepower Customizable mounting   When ordering: Please indicate in the Note section what machine you will be attaching the Explosion Proof Oil Pump to. We need this information to assure the correct Inlet Adapter is provided and also the dimensions of the mounting configuration you will need. Hazardous Location Clas 1 C,D / 2 E,F,G Nominal Efficiency 85.5% Frame 56CZ Motor Application Hazardous Location Lead Length 6" RPM Range 1101-1200 Standards UL listed (E12044), CSA Certified (LR47504) Frame Material Rolled Steel Duty Continuous HP 1/4 Voltage Compatibility 115/208-230, 120/240 Length Less Shaft 11-7/8" Includes Conduit Box (Unmounted), Leads Through 1" NPT Nipple Motor Shaft Design Keyed Shaft Length 2-1/4" Item Harazardous Location Motor Motor Service Factor: 1.00 1.00 Motor Thermal Protection auto Motor Shaft Rotation CW/CCW Full Load Amps 6.8/3.1-3.4 Overall Length 14-5/16" Voltage 115/208-230 Motor Frame Material Rolled Steel Ins. Class B Motor Mounting Type Face Motor Design Capacitor- Start Shaft Dia 5/8" Hz 60 Motor Bearing Ball Temp. Code T3B Motor Enclosure Design Totally Enclosed Fan-Cooled Nameplate RPM 1140 Max. Ambient Temp 40 Degrees C Phase 1

    Read more

    $7,600.00

  • Fisher American 8′ Fume Hood w/ Acid Storage Cabinets Fisher American 8′ Fume Hood w/ Acid Storage Cabinets

    View options

    Fisher American Fisher American 8′ Fume Hood w/ Acid Storage Cabinets

    Fisher American 8′  Fume Hood w/ Acid Storage Cabinets  (Please Note:  2 weeks Lead Time)  8′ Fisher American Scientific Chemical Laboratory Fume Hood  with Flammable & Acid cabinets  (NLS-804)  Unit does Not include blower  Add Blower, The blower is ¾ HP Hazardous Location blower C1D1  Call in for Non-Hazardous Blower Pricing Information & Dimensions below:   Fume Hood (Exterior) Dimensions: Width: 96″ Depth: 31 1/2″ Height: 54 1/2″ and 89 1/2″ with cabinet   Work Area (Interior) Dimensions: Width: 86″ Depth: 23″ Height: 45″   Door opening: 26″ Sash Doors:  4   Fume Hood Accessories: Light on/off Switch 5 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 Flammable Cabinet 1 Acid Cabinet  *Polyply Composites U.L. Listed ChemBlok CR-900 laminates are glass reinforced, UV inhibited composites sheet that offer excellent Chemical and flame resistance wherever a cost effective general-purpose corrosion material is required.  Typical Properties General Information ASTM Polyply Composites CR-900 U.L Recognition File Number E31703 Meets U.L. Standards 1805 Color (Standards) White Sheet Size 48'' x 96'' length Sheet Thinkness 3/16'' Other Sizes upon Request Specific Gravity 1.8 D-792 Water Absorption (%by weight) 0.093 D-792 Flame Spread 20.2 UL 723/E-84 Smoke Generation, Tunnel Test 166 E-84 Flame Resistance Self Extinguishing Tensile Strength, psi 8,300 D-638 Flexural Strength,psi 20,400 D-790 Compressive Strength 29,200 D-695 IZOD Impact Strength 8.1 D-256 Barcol 50     REAGENT RESISTANCE - PANEL CR900 LOT 07-1087,88 No. Reagent Rating No. Reagent Rating 1 Amyl Acetate 0 26 Iodine, Tincture 2 2 Ethyl Acetate 0 27 Methyl Ethyl Ketone 1 3 Acetic Acid 98% 1 28 Methylene Chloride 2 4 Acetone 1 29 Mono Chlorobenzene 0 5 Acid Dichromate 5% 2 30 Naphthalene 0 6 Butyl Alcohol 0 31 Nitric Acid 20% 0 7 Ethyl Alcohol 0 32 Nitric Acid 30% 0 8 Methyl Alcohol 0 33 Nitric Acid 70% 2 9 Ammonium Hydroxide 28% 0 34 Phenol 90% 0 10 Benzene 1 35 Phosphoric Acid 85% 0 11 Carbon Tetrachloride 1 36 Silver Nitrate Saturated 0 12 Chloroform 1 37 Sodium Hydroxide 10% 0 13 Chromic Acid 60% 2 38 Sodium Hydroxide 30% 0 14 Cresol 1 39 Sodium Hydroxide 40% 0 15 Dichloroacetic Acid 1 40 Sodium Hydroxide, Flake 0 16 Dimethyl Formamide 1 41 Sodium Sulfide, Saturated 0 17 1,4-Dioxane 0 42 Sulfuric Acid 33% 0 18 Ethyl Ether 0 43 Sulfuric Acid 77% 1 19 Formaldehyde 37% 0 44 Sulfuric Acid 96% 3 20 Formic Acid 90% 1 45 Sulfuric Acid 77% + Nitric Acid 70% (50/50) 2 21 Furfural 2 46 Toluene 0 22 Gasoline 0 47 Trichloroethylene 0 23 Hydrochloric Acid 37% 0 48 Xylenes 0 24 Hydrochloric Acid 48% 3 49 Zinc Chloride, Saturated   0 25 Hydrogen Peroxide 3% 0   Unless otherwise indicated, all properties are based on tests performed on standard ASTM Test Samples and according to ASTM test methods  Values Shown are for test Samples Made from production materials and are believed to be typical. No warranty is expressed or implied.

    Read more

    $14,825.00 - $20,297.00

    View options

  • Beaker & Wrench Outlet Pump Beaker & Wrench Outlet Pump

    View options

    Beaker & Wrench Beaker & Wrench Outlet Pump

    Beaker & Wrench Outlet Pump Outlet pump comes with: – motor – heater/pump controller – mounting – pump (heated) – If you need custom please purchase custom adapters separately.  

    Read more

    $7,200.00

    View options

  • BVV Compression Union Tee BVV Compression Union Tee

    View options

    BVV Compression Union Tee

    BVV Compression Union Tee This stainless steel tube stub adapter can be used to connect 3 compression fittings. The tube stub size will be the OD of the compression pipe fitting. This will fit with Swagelok, Yor-Lok, or other comparable compression fittings. BVV™ Compression Union Tee - Data Sheet

    Read more

    $35.00 - $55.00

    View options

  • Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Across International Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps cross International glass trap for Ai 1st Gen T series -40C and -80C cold traps. Features Fully openable for easy cleaning Inlet and outlet: 3/8" hose barb Joint type: 34/45 standard taper 2" OD x 10" height Glass material: high borosilicate glass 3.3

    Read more

    $120.00

  • Apiezon Q Sealing Compound

    Apiezon Apiezon Q Sealing Compound

    Apiezon Q Sealing Compound Apiezon Q Compound sealant can be used to seal around the edges of flat unground joints, to blank off parts of an apparatus temporarily or to seal glass cylinders to metal plates to produce temporary vacuum enclosures. Whether sealing joints, filling in holes or filling gaps in a vacuum system, it is extremely versatile and is the ideal leak sealant in a wide array of uses and industries. Temporary vacuum sealant Versatile product suitable for a multitude of uses Excellent waterproof medium Easy to use and to remove Ambient temperatures (10 to 30°C) 10 year shelf life MSDS Technical Data Sheet

    Read more

    $300.00

  • Apiezon T grease

    Apiezon Apiezon T grease

    Apiezon T grease Apiezon T Grease is a silicone-free medium temperature vacuum grease renowned for its quality and tenacity. Apiezon T Grease has gained approval from prestigious organisations including NATO and the US Navy. Apiezon T Grease is a silicone-free medium temperature vacuum grease which: performs well under a wide range of temperatures, from +10 to +120°C is not recommended for highly stressed bearings has added cushioning exhibits good ‘stiction’ or sticking power has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents exhibits a vapour pressure of 4.6 x 10-9 Torr at 20°C As a vacuum grease, Apiezon T Grease is specifically designed for use in the low to medium vacuum range, yet is suitable to be used in the high vacuum range at lower temperatures. We specifically recommend that Apiezon T Grease is used for both sealing and lubrication in medium temperature environments (but not for highly stressed bearings). T Grease confers excellent cohesive strength and therefore when joints are mated they stay mated, forming an extremely efficient, gas tight seal. Apiezon T Grease provides extra cushioning between mated surfaces, and is highly effective in protecting fragile glass to glass joints. The strong absorption properties of Apiezon T Grease give it a powerful ‘gettering’ action . This is of considerable value in the electronics industry where scrupulous cleanliness of metal surfaces is required. Apiezon T Grease has also found a niche as a barrier to oxygen transmission in both vacuum and non-vacuum situations. Apiezon T Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $295.00

  • Apiezon L grease. 25g tube

    Apiezon Apiezon L grease. 25g tube

    Apiezon L grease. 25g tube Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease suitable for use scientific and industrial applications. Apiezon L Grease has the best vapour pressure properties of all the Apiezon products and is therefore suitable for use in ultra-high vacuum applications. L Grease is regularly used by highly respected organisations such as The European Space Agency, NASA and NATO. Apiezon L Grease is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease which: exhibits an extremely low vapour pressure of 7 x 10-11 Torr at 20°C does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As an ultra-high vacuum grease with excellent lubrication properties and radiation resistance Apiezon L Grease is used for many diverse applications. In particular, L Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon L Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon L Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon L Grease this is not a problem. As a halogen-free product Apiezon L Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, L Grease maintains excellent lubrication properties in high radiation applications, demonstrating only a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. To find out more about Apiezon L Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon L Grease Vapour Pressure Graph MSDA Techinical Data Sheet

    Read more

    $210.00

  • Sale -33% Glas-Col Thermocouple Type "J"

    Glas-Col Glas-Col Thermocouple Type "J"

    Glas-Col Thermocouple Type "J" A thermocouple is a sensor that measures temperature. This type of sensor consists of two different types of metals that when welded together create a junction and small voltage which is then read by an indicator or control.  Glas-Col offers thermocouples in various types, diameters and probe lengths.  Type J: is the most frequently used thermocouple, and it consists of a positive (Iron) and a negative (Constantan) leg.   Specifications D x L 1/4" x 18" Lead Length 72"

    Read more

    $285.00 $190.00

  • Flexible Rubber Foam Pipe Insulation Sheet with Plain Backing, 4 Feet Long x 36" Wide x 1/2" Thick

    Flexible Rubber Foam Pipe Insulation Sheet with Plain Backing, 4 Feet Long x 36" Wide x 1/2" Thick

    Temperature Range:Plain Backing: -295° to 220° FAdhesive Backing: 20° to 180° F Heat Flow Rate: See Table Density: See Table Color: See Table Specifications Met: See Table

    Read more

    $80.00

  • Flexible Rubber Foam Pipe Insulation Tube Slit, 1/2" Thick Wall, 1-5/8" ID, 6 Feet Long

    Flexible Rubber Foam Pipe Insulation Tube Slit, 1/2" Thick Wall, 1-5/8" ID, 6 Feet Long

    Temperature Range: -295° to 220° F Heat Flow Rate: 0.25 Btu @ 75° F Density: 4.5 lbs./cu. ft. Color: Black Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534

    Read more

    $38.00

  • Sale -58% Union Tee, 1/2 Tube Fitting x 1/2 Tube Fitting x 1/2 Tube Fitting, 316 SS

    SSP Corporation Union Tee, 1/2 Tube Fitting x 1/2 Tube Fitting x 1/2 Tube Fitting, 316 SS

    Body Material 316 SS Connection 1 - Type Tube Fitting Connection 1 - Size 1/2 in Connection 2 - Type Tube Fitting Connection 2 - Size 1/2 in Connection 3 - Type Tube Fitting Connection 3 - Size 1/2 in Brand Series Duolok Shape Tee End Connections TF x TF x TF Production Category 1 End Connection Type Duolok Tube End

    Read more

    $60.00 $25.00

  • Sale -60% Female Elbow, 3/8-18 FNPT x 3/8-18 FNPT, 316 SS

    SSP Corporation Female Elbow, 3/8-18 FNPT x 3/8-18 FNPT, 316 SS

    Body Material 316 SS Connection 1 - Type Female National Pipe Thread Connection 1 - Size 3/8-18 Connection 2 - Type Female National Pipe Thread Connection 2 - Size 3/8-18 Brand Series TruFit Shape Elbow End Connections FNPT x FNPT Production Category 4 End Connection Type Female National Pipe Thready by Female National Pipe Thread

    Read more

    $20.00 $8.00

  • Sale -33% Pipe Reducing Adapter, 1/2-14 FNPT x 3/8-18 MNPT, 316 SS

    SSP Corporation Pipe Reducing Adapter, 1/2-14 FNPT x 3/8-18 MNPT, 316 SS

    Body Material 316 SS Connection 1 - Type Female National Pipe Thread Connection 1 - Size 1/2-14 Connection 2 - Type Male National Pipe Thread Connection 2 - Size 3/8-18 Brand Series TruFit 10K Shape Straight End Connections FNPT x MNPT Production Category 1 End Connection Type Female National Pipe Thread by Male National Pipe Thread

    Read more

    $15.00 $10.00

  • Sale -50% 44 Gallon Boldtbags Full Mesh Stacker Lock-Top w/ Belt Lock 44 Gallon Boldtbags Full Mesh Stacker Lock-Top w/ Belt Lock

    Boldtbags 44 Gallon Boldtbags Full Mesh Stacker Lock-Top w/ Belt Lock

    44 Gallon Boldtbags Full Mesh Stacker Lock-Top w/ Belt Lock Lock top bags are the new product made with you in mind. Adjust your bag to the height you need and lock it in for easier product washing and collection. Custom designed with Full Mesh, these bags provide exceptional ice water sieving properties and award winning purity thanks to the large functional surface area and lightweight construction that allows for easy use and award winning results. Ideal purchase for Laboratories. Have a variety of bags to choose from and mix and match for perfect trichlome extraction. Diameter 23.5″ Depth 28.25″ 4 bag kit includes: 190 micron bag (green) 160 micron bag (red) 90 micron bag (black) 45 micron bag (white) Additional belt lock Scraping card 8 bag kit includes: 220 micron bag (blue) 190 micron bag (green) 160 micron bag (red) 120 micron bag (orange) 90 micron bag (black) 73 micron bag (yellow) 45 micron bag (white) 25 micron bag (purple) Additional belt lock Scraping card

    Read more

    $400.00 $200.00

  • Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25 Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25

    View options

    DigiVac Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25

    Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25 The DigiVac Bullseye Precision Gauge with Bluetooth is the world’s first wireless vacuum gauge featuring one-of-a-kind patented vacuum graphing and DigiVac’s ‘Vacuum Gauge’ app Versatile wireless vacuum gauge that you can monitor right from your phone or tablet (Apple ios and android) Enables remote monitoring and troubleshooting Set low and high alarm from your phone Email vacuum data to document leaks, baseline pressure or pump-downs Use battery power or standard microB-USB power Choose standard Thermocouple Plus sensor or the Upgraded Agilent 531 NPT sensor (this sensor configuration is CE and RoHs compliant), or the Agilent 536 NPT sensor which includes an integrated baffle to extend the life of the sensor by helping to protect it from contamination Portable and Precise Rugged thermocouple vacuum gauge ideal for understanding: Leaks, Pump Downs, Out-gassing or Stable Systems Includes a powerful magnet and kickstand to enable hands-free operation Long battery life and versatility with 12 different measuring units (micron, Torr, Inches of Hg, kPa, Inches of H20, millitorr, mbar, Pa, PSIA, mm of Hg, bar, and mm of H2O) Calibrated under actual vacuum against a NIST standard.  Graphing and Analysis Patented vacuum graphing displays vacuum and time data Visual graphing right on the display that identifies current system status Vacuum Analytics to quickly identify vacuum pressure trends Graphical display for quick determination of vacuum level Bluetooth Bullseye Gauge Applications Vacuum pump testing Baseline vacuum pump performance Transformer dry-out Schlenk line monitoring Botanical oil processing Distillations Vacuum Process Monitoring Technical Specifications Units Torr, mbar, bar, kPa, inHg, mm Hg, millitorr, microns, inches of water, PSI, Pa Control Range 1E-4 – 1000 Torr Range with Accuracy .001-5 Torr Sensor Type Agilent 531 (NPT), Agilent 536 (NPT, KF15, or KF16), VGT500 Dimensions 6.2”H x 3.7”W x 1.3”D Certifications ROHS and CE

    Read more

    $791.00 - $941.00

    View options

  • Welch WOB-L Pump 2561

    Welch Vacuum - Gardner Denver Welch WOB-L Pump 2561

     Welch WOB-L Pump 2561 Reliable WOB-L Piston pump is perfect for many common laboratory vacuum applications. Features: Vacuum to 5 Torr (29.8"Hg). Includes Vacuum Regulator and Gauge - simple to adjust and monitor vacuum level. Inlet Water Trap - float ball rises to seal off pump from accidental ingestion of water. Muffler quiets pump and filters discharge air. For use with dry or aqueous vapor applications only. Features: Economical Oil Free Adjustable Vacuum Applications: Vacuum Filtration Many filtrations require only minimal vacuum to proceed; deep vacuum is not required. Vacuum pump flow required is roughly proportional to the total surface area of filters being used. Filtration of particulate-clogging samples can be improved somewhat with deeper vacuum, but a combination of larger filter surface area, smaller samples, and sequential use of decreasing porosity filter papers may also be required for timely filtration. Choose a standard duty vacuum pump for aqueous vapors; use a PTFE pump for resistance to harsh chemicals.  Specifications: Applications Vacuum filtration up to 6 funnel manifold; Lab automation - aspiration of systems utilizing 96 / 256 well format; Welchnet lab installations up to 10 outlet fixtures (geneneral use, filtration) Type Laboratory Vacuum Pump Free Air Displacement cfm (l/min.) @60Hz 3.5(100) Free Air Displacement m3/hr (l/min.) @50Hz 4.9(83) Ultimate Pressure 60(80) Maximum Vacuum 27.6 Max Pressure PSIG (pascal) Motor Horsepower (watts) 1/3(250) Adjustable Vac. / Gas Ballast Yes Tubing Needed 1/4(7) Intake Thread NPT 1/4 Overall Dimensions LxWxH in. (cm) 15.0x10x10 (38.1x25.4x25.4) Ship Weight 24(10.9) Shipping Carton Dimensions LxWxH in. (cm) 21x12x15 (53x30x38) Intake Catch Jar Yes Adjustable Vacuum Knob Vacuum Gauge Dial

    Read more

    $2,000.00

  • Exhaust Silencer Filter For Edwards NXDS Series Vacuum Pumps

    Edwards Exhaust Silencer Filter For Edwards NXDS Series Vacuum Pumps

      Exhaust Silencer Filter For Edwards NXDS Series Vacuum Pumps   Edwards vacuum exhaust silencer for nXDS series vacuum pumps, including nXDS6i(C), nXDS10i(C), nXDS15i(C) and nXDS20i(C) dry scroll pumps when they are not connected to a house exhaust system. These silencers also offer exhaust filtration. Features Compact design combines both filtration efficiency and noise reduction Integrated inlet diffuser optimizes sound attenuation Multi-stage noise reducing features including final stage sound absorbent insert Tubular silencing design - tube is positions to maximize attenuation and air flow while minimizing pressure drop Patented high grade element with built-in butterfly gasket seal which creates positive seal between housing hemispheres and a new seal with each element Seamless drawn housings - no welds to rust or vibrate apart Durable carbon steel construction with black powder coated finish Ability to mount vertically or horizontally   Applications Dry Scroll, Piston, Vane and Venturi Vacuum Pumps Prevent tip seal dust and debris from contaminating the environment Silence irritating pump exhaust noise

    Read more

    $547.00

  • SCILOGEX SCI6-Pro LCD Digital 5.5 x 5.5 in. Magnetic Stirrer, ceramic plate, 110-240V, 50/60Hz US Plug

    Scilogex SCILOGEX SCI6-Pro LCD Digital 5.5 x 5.5 in. Magnetic Stirrer, ceramic plate, 110-240V, 50/60Hz US Plug

    SCILOGEX SCI6-Pro 5.5 x 5.5 in. LCD Digital Magnetic Stirrer, 200-1500rpm SCILOGEX SCI6-Pro 5.5 x 5.5 in. LCD Digital Magnetic Stirrer, 110-240V, 50/60 Hz. SCILOGEX SCIS6-Pro 5.5 x 5.5 in. LCD Digital Magnetic Stirrer Features: Easy to read backlit LCD display, with independent heat and stir display Ceramic plate for chemical resistance and easy clean Brushless DC motor is maintenance free Aluminum cover with ceramic work plate, allows for immediate heat transfer External temperature control is possible with temperature sensor PT1000 Electronic speed control for constant speed even during changes in load Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar Max. stirring quantity of H2O at 5L Digital speed control with max. speed up to 1500rpm cTUVus approved for UL and CSA 2 Year Warranty The new MS6-Pro magnetic stirrer is a very economically priced LCD digital stirrer. Digital Magnetic Stirrer Specifications:   Work plate dimensions (WXD) 140x140mm Work plate material Aluminum cover with ceramic coating Motor type Brushless DC motor Motor input power 2.4W Motor output power 1.8W Power 10W Voltage 100-240V, 50/60Hz Stirring positions 1 Max. stirring quantity[H2O] 5L Max. magnetic bar[length] 50mm Speed range 200-1500rpm Speed display LCD Protection class IP21 Dimension[WxDxH] 320x180×108mm Weight 2.2kg Permissible ambient temperature and humidity 5-40°C, 80%RH Control accuracy of sensor ±20rpm   Additional Resources and Information Downloadable PDFs SCILOGEX Hotplate-Stirrers brochure SCILOGEX SCI6-Pro manual

    Read more

    $320.00

  • SCILOGEX SCI-Spin Stirrer, 100-240V, 50/60Hz, US Plug

    Scilogex SCILOGEX SCI-Spin Stirrer, 100-240V, 50/60Hz, US Plug

    SCILOGEX SCI-Spin Stirrer, 15-1500rpm SCILOGEX SCI-Spin Stirrer, 100-240V, 50/60Hz, US plug Product Features  A wide range of speed from 15-1000rpm Automatic reverse rotation for excellent stirring Protection class (IP65)  PET top provides excellent chemical resistance  Slip-proof and stable Ultra silence and vibration-free  Multi-voltage cTUVus approved for UL and CSA 2 YEAR WARRANTY The Scilogex SCI-Spin Stirrer is an ultra-flat compact stirrer ideal for stirring applications. Its space saving design minimizes bench space and portable due to its light weight. With excellent stirring functionality, the compact shape of FlatSpin takes less bench space and makes storage easier. Product Specifications    Work plate dimension Φ90mm Work plate material PET Motor type Motorless Motor output power 3W Power 5W Voltage 100-120/200-240V,50/60Hz Stirring positions 1 Max. stirring quantity[H2O] 0.8L Max. magnetic bar[length] 40mm Speed range 15-1500rpm Speed display button Protection class IP65 Dimension[WxDxH] 175x120x15mm Weight 0.3kg Permissible ambient temperature and humidity 5-40°C, 80%RH   Additional Resources and Information Downloadable PDFs​  SCI-Spin Stirrer Manual  Hotplate-Stirrers Brochure SCILOGEX SCI-Spin Magnetic Stirrer.mp4 from SCILOGEX on Vimeo.  

    Read more

    $175.00

  • SCILOGEX SCI40-S Overhead LED Digital Stirrer, with s/steel cross stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug SCILOGEX SCI40-S Overhead LED Digital Stirrer, with s/steel cross stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug

    Scilogex SCILOGEX SCI40-S Overhead LED Digital Stirrer, with s/steel cross stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug

    SCILOGEX SCI40-S (40L) LED Digital Overhead Stirrer 50-2200rpm SCILOGEX SCI40-S Overhead LED Digital Stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug (including steel cross-stirrer Part# 1890007, stand sold separately) Product Features A wide range of speed from 50 to 2200rpm Brushless DC motor for long life and maintenance free Analog speed controls displayed on the LED display for monitoring actual speed High torque for viscous medium stirring Over torque protection automatically stops the motor Safety circuits allow for safe stop function in anti-stall or overload condition A through-shaft design allows for easy adjustment of the impeller position  In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns Pass through stirrer rods accepted cTUVus approved for UL and CSA 2 YEAR WARRANTY Product Specifications   Maximum stirring capacity 40L Maximum torque 60Ncm Viscosity maximum 50000mPas Speed range 50-2200rpm Speed display accuracy ± 50rpm Speed display resolution ± 10rpm Chuck diameter range 0.5-10mm Dimensions 3.3W x 8.7H x 7.3D in (83W x.220H x 186D mm) Motor rating input 120W Motor rating output 100W Weight 5.5lbs Motor type brushless DC motor Voltage/Power 100-220V, 50/60 Hz/ 130W Speed/Torque display LED Overload protection display LED lights Protection class IP42 Permissible ambient temperature and humidity 5-40°C, 80%RH   Additional Resources and Information Downloadable PDFs SCI40-S manual SCILOGEX OverheadStirrers brochure SCILOGEX OverheadStirrers Software SCILOGEX SCI20/40-S LED Digital Overhead Stirrer.mp4 from SCILOGEX on Vimeo.  

    Read more

    $1,013.00

  • Packing Rod Extension Screws

    Packing Rod Extension Screws

    Packing Rod Extension Screw This packing rod extension screw allows you to combine our 24" Packing Rod Extension to our standard Stainless Steel Packing Rods making it easier to pack material columns greater than 36" in length.

    Read more

    $2.50

  • Neo Diaphragm Replacement Membrane Neo Diaphragm Replacement Membrane

    Neo Diaphragm Replacement Membrane

    These replacement diaphragms are used in the BVV V-40 diaphragm vacuum pumps. The V-40 has two diaphragms and will need one two pack to do a rebuild on it.

    Read more

    $125.00

  • Sale -63% High-Polish Quick-Clamp Sanitary Tube Fitting, 304 Stainless Steel Straight Adapter For 2" Tube Od x 2 Npt Male

    High-Polish Quick-Clamp Sanitary Tube Fitting, 304 Stainless Steel Straight Adapter For 2" Tube Od x 2 Npt Male

    For Use With: Air, Water Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM 270

    Read more

    $120.00 $45.00

  • High-Polish Quick-Clamp Sanitary Tube Fitting, 304 Stainless Steel Adapter For 2" Tube Od x 2" Barbed Hose Id

    High-Polish Quick-Clamp Sanitary Tube Fitting, 304 Stainless Steel Adapter For 2" Tube Od x 2" Barbed Hose Id

    For Use With:3-A Certified Fittings: Air, Beverage, Food, WaterAll Other Fittings: Air, Water Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM 270 Specifications Met: See table Fittings with barbed hose end connect flexible hose or tubing to your system. Secure with a hose clamp (sold separately).

    Read more

    $80.00

  • Huber adapter M16x1f-1/2"m

    Huber Huber adapter M16x1f-1/2"m

    Huber adapter M16x1f-1/2"m Adapter M16x1 f - R1/2 m Adapter M16x1 f - R1/2 m M16x1 female thread to R1/2 male thread

    Read more

    $155.00

  • Throttle Valves for Pneumatic Presses Throttle Valves for Pneumatic Presses

    Throttle Valves for Pneumatic Presses

    Throttle Valves for Pneumatic Presses Throttle Valve used to control the speed of your pneumatic press. Replace the fitting on the output side of your regulator. Thread Size: 1/2" NPT, Quick Connect Air Hose Size: 12mm

    Read more

    $20.00

  • Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump

    Welch Vacuum - Gardner Denver Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump

    Welch Explosion Proof  CRVpro4 Direct Drive Rotary Vane Vacuum Pump  ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details Explosion Proof Motor 110-120V/208-240V 60Hz 1 Phase The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits:  Runs 10°C cooler than comparable pumps. Slows corrosion.  Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals.  Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts.  The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection.  Suitable applications include freeze drying, degassing, vacuum ovens and concentrators.   3046E-01 comes with an explosion proof motor. Conduit wiring installation required. No cord, plug, or switch provided.  Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr.   Specifications Application CRVpro4 Free Air Displacement @ 60 Hz, cfm (L/min) 2.8 (78) Free Air Displacement @ 50 Hz, m³/hr (L/min) 4 (67) Ultimate Pressure, torr (mbar) 5x10⁻⁴ (4x10⁻⁴) Noise Level, dBA 50 Motor Speed, RPM, @60Hz, @50Hz 1740 (1450) Motor Power, HP (kW) 0.4 (0.5) Oil Capacity, mL 1150 Connection Flanges NW 16 Inlet Hose Connection* 5/8" to 3/4" Weight, lbs (kg) 46.3 (21) Dimensions, LxWxH, in (mm) 18.2x6.1x9.1 (463x157x230)

    Read more

    $5,100.00

  • Sale -34% Compressor Head BARE for BVV Recovery Pump/ CMEP Retrofit Compressor Head BARE for BVV Recovery Pump/ CMEP Retrofit

    Compressor Head BARE for BVV Recovery Pump/ CMEP Retrofit

    This is a replacement compressor head for the BVV2CYL, BVV4CYL, and BVVCMEP-RETRO. It is a full stainless steel head and has all the proper holes drilled to fit on our recovery pumps.

    Read more

    $35.00 $23.00

  • Pump Part - MVP - 60 PSI & Liquid - Access Cover

    Master Vapor Pumps Pump Part - MVP - 60 PSI & Liquid - Access Cover

    Pump Part - MVP - 60 PSI & Liquid - Access Cover All sales final     

    Read more

    $88.00

  • 3′ Fisher American Fume Hood 3′ Fisher American Fume Hood

    View options

    Fisher American 3′ Fisher American Fume Hood

    3′ Fisher American Fume Hood   sku NLS - 301 NLS - 302 NLS - 303 NLS - 304 NLS - 305 NLS-306 Color White White White Blue Blue Blue Fume Hood Exterior Dimensions: Width: 36″ 36″ 36″ 36″ 36″ 36″ Depth: 31 1/2″ 31 1/2″ 31 1/2″ 31.5″ 31 1/2″ 31 1/2″ Height: 54 1/2″ and 89 1/2″ with cabinet 54 1/2″ and 89 1/2″ with cabinet 54 1/2″ and 89 1/2″ with cabinet 54.5″ 54 1/2″ and 89 1/2″ with cabinet 54 1/2″ and 89 1/2″ with cabinet Work Area (Interior) Dimensions: Width: 26″ 26″ 26″ 26″ 26″ 26″ Depth: 23″ 23″ 23″ 23″ 23″ 23″ Height: 46″ 46″ 46″ 46″ 46″ 46″ Fume Hood Accessories: Light on/off Switch Light on/off Switch Light on/off Switch 1 Light on/off Switch Light on/off Switch Light on/off Switch 1 AC Power Plug 1 AC Power Plug 1 AC Power Plug 1 AC Power Plug 1 AC Power Plug 1 AC Power Plug 1 Cold Water Valve 1 Cold Water Valve 1 Cold Water Valve 1 Cold Water Valve 1 Cold Water Valve 1 Cold Water Valve 1 Gas Valve 1 Gas Valve 1 Gas Valve 1 Gas Valve 1 Gas Valve 1 Gas Valve 1 Horizontal sliding glass door 1 Horizontal sliding glass door 1 Horizontal sliding glass door 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 Horizontal sliding glass door 1 Horizontal sliding glass door 1 General Storage 1 ACID Storage 1 Flammable Storage 1 Flammable Storage 1 Acid Storage 1 General Storage

    Read more

    $6,825.00 - $8,525.00

    View options

  • Beaker & Wrench 40L Complete Dosing System

    Beaker & Wrench Beaker & Wrench 40L Complete Dosing System

    Beaker & Wrench 40L Complete Dosing System  Please note: This Product has 1 week lead time    For Wiped Film Evaporators  The 40L Complete Dosing System by Beaker & Wrench® is a continuous feed system that connects to any Wiped Film Evaporator effortlessly. Optimize your time and end results by dialing into your feed system. The Feed Gear Pump by Beaker & Wrench® gives the operator control over flow rate and freedom to load material into the flask without breaking deep vacuum. Once attuned with the flow rate, calculations become less of a guessing game and more of a formula. Distill as slow or as fast as needed!   The contents of this system include: Heated 40L feed flask Crude Cozy™ Digitally operated, heated Feed Gear Pump 4″ tri-clamp port on feed lid Inlet adapter (for your still) 6′ Heated Transfer Line (not pictured) Wattage: 90/ft, 120 Volts Maximum Temp: 150°C UL Listed 3 Channel PID Temperature Controller UL: E510826   How does it work?Crude is loaded into a heated feed flask, which then flows through the heated Gear Pump. The Gear Pump moves fluid through the gears while maintaining vacuum. Oil is then pulled towards the still body, ready for distillation!   Cleaning:Every Operator has their own preference in how they clean their Wiped Film Evaporator. Ethanol, Isopropyl alcohol or vegetable oil are viable options when looking to clean your Wiped Film. Step-by-step instructions are included in the manual!     Installation: Are you interested in having a Beaker & Wrench® technician install your Complete Dosing System? Click here for a quote! The advantage with having a technician perform installation is you can ask any and all questions necessary on how to process with your Wiped Film Evaporator!   What is the warranty?1 year manufacturer’s warranty on parts for exchange. Customer has 5 days from day of delivery to inspect equipment for breakages or damage.     ** Please indicate the inlet size of your still in the Notes section of your purchase. This will help us adapt to your set-up.  

    Read more

    $13,500.00

  • 4" Tri-Clamp U-Bend with 2" Side Port 4" Tri-Clamp U-Bend with 2" Side Port

    4" Tri-Clamp U-Bend with 2" Side Port

    This 4" Tri-Clamp U-Bend is 14" in length from center to center of the 4" ports. There is a 2" port in the middle that is useful to mount sensors, gauges, or sight glasses. The material of this part is 304 Stainless steel.

    Read more

    $300.00

  • BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid

    Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid

    Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid This End Cap comes with (4) Compression connections and (2) 1.5" and (1) Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid. They allow the user to adapt and connect a tube stub connection to the (1) 1/4", (2) 3/8", and (1) 1/2" port on a Tri-Clamp lid and the Tri-Clamp Connections. These 7 connections are welded on a 10" Hemispherical Tri-Clamp End Cap. Specifications Material: 304 Stainless Steel Connection Types: (2) 2" and (1) 1.5" Tri-Clamp with 3" Tube Extension Below Lid on Center Tri-Clamp Port 10" Tri-Clamp (1)1/4", (2) 3/8" and (1)1/2" Female Compression Connections Standard: 3A

    Read more

    $320.00

  • Sale -25% P10 BVV™ Distillation Head - USA Made

    P10 Distillation Head - USA Made

    P10 BVV™ Distillation Head P10 Distillation Head has 2 sets of vigreux in the distillation column with 45/50 lower joint, 24/40 Thermometer Joint, and 34/45 side joint and includes GL-14 barb connections. MADE IN THE USA Designed for 10 Liter Flasks Set of 2 vigreux to allow for more packing media Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media Increased condenser length and diameter for more efficient condensation of vapor with zero clogging *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.  **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    Read more

    $800.00 $600.00

  • Sale -30% Refurbished GRACO Pneumatic Diaphragm Pump -40C

    Refurbished GRACO Pneumatic Diaphragm Pump -40C

    Graco Pneumatic Diaphragm Pump for Ethanol NOTE: This product has been refurbished and tested to be in good working order. The product may show cosmetic signs of use such as discoloration or minor scratches. This air driven diaphragm pump is designed to be used with ethanol filtration, pumping processes, and BVV Centrifuges. It's unique rugged design can withstand temperatures from -40C to -80C. The inner diaphragms are made out of PTFE and the main body of the pump is made out of 316 Stainless Steel. Specifications -40C -80C Power Source Air Operated 100PSI 28CFM Certification Required No Certifications ATEX Fluid Section Material Stainless Steel Pump Inlet/Outlet 716-3/4 Inc, 16gpm (19mm, 61lpm) Center Section Polypropylene Standard Air Vale (NPT) Porting SST Standard Porting (NPT) Seats 316 SST Balls PTFE Diaphragms PTFE  PTFE Overmolded Manifold O-rings PTFE Max Operating Temp. 220°F (105°C)

    Read more

    $4,000.00 $2,800.00

  • Sale -20% Refurbished - Graco TE30-0342 Electric Driven Double Diaphragm Pump Refurbished - Graco TE30-0342 Electric Driven Double Diaphragm Pump

    Refurbished - Graco TE30-0342 Electric Driven Double Diaphragm Pump

    QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The stainless-steel fluid section is designed to provide a high level of abrasion and corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this electric pump is an energy-saving workhorse that also delivers lower lifetime costs than less efficient pump technologies and is ideal for applications involving materials that are highly abrasive, paints, solvents or heated materials. This additional resilience means less downtime, which in turn provides a new opportunity to improve your bottom line. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback Quiet operation reduces plant noise and improves employee safety and health Smart pump control provides more accurate flow set points and built-in I/O Efficient Electric Motor Powder-coated aluminum electric drive 120 VAC 1Ph motor with 15 ft flying leads CID1 Groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval Materials of Construction Stainless steel fluid section with NPT end port Internal components include 316 stainless steel seat, PTFE ball, PTFE overmold diaphragm and PTFE manifold o-ring

    Read more

    $5,303.00 $4,242.00

  • Sale -30% Industrial filter system with a yellow background

    Refurbished - Pressure Filtration System - 6 x 28 - Bare

    This filter system is designed for high flow rates to filter unwanted precipitates from your oleoresin. The housing provides full enclosure of your filter bags, which are fully supported by the strainer basket within the housing to prevent blowouts. Pressure and high flow rates may be applied to get the fastest flow through filter bags. Using the housing allows full exhaustion of a bag prior to changing it without the sacrifice in filtering time.These filter bag housings use an eye-bolt clamp style to allow for high pressure without leakage, while still maintaining an easy to remove cover. When one filter bag gets filled, it can easily be swapped out by removing the lid while not under pressure and pulling the old bag out. The main seal on the housing is Buna-n rubber. The liquid pump is of 316 Stainless Steel Construction with PTFE seals and runs on compressed air or nitrogen. Built options Include: 1x 304 Stainless Steel Filter Bag Housing 1x 304 Stainless Steel Basket 1x 304 Stainless Steel Displacement Cylinder With Pump options Include: 1x 304 Stainless Steel Filter Bag Housing 1x 304 Stainless Steel Basket 1x 304 Stainless Steel Displacement Cylinder 1x 316 Stainless Steel Liquid pump Connecting hose or hardline tubing 4x Nomex Filter Bags (1μm, 5μm, 25μm, and 100μm)   Specifications PFS-790-15 PFS-790-45 Flow Rate (GPM) ≤15 ≤45 Max Pressure (PSI) 100 @28 CFM Volume (in^3) 790 Working Temperature (°C) -40 - 100 Air Hose Connection ¼” JIC Flare ½” JIC Flare Filter Bag Housing Dimensions (LxWxH) 14” x 11” x 41” Filter Bag Trade Size #8 Included PVC Hose size ID ¾” 1”   *This unit requires an air compressor for operation (not included)

    Read more

    $680.00 $475.00

  • Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps

    Across International Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps

    Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps Across International 500mL glass trap for Ai 2nd Gen T40 -40C cold traps. Upward hose barb ports give you safer and easier vacuum tubing connection and removal. Features Fully openable for easy cleaning Inlet and outlet: 3/8" hose barb Joint type: 45/50 standard taper 2" OD x 15" height Glass material: high borosilicate glass 3.3

    Read more

    $200.00

  • TRS21 Anti-spark/explosion pump Standard

    TRS21 Anti-spark/explosion pump Standard

    The TRS21 is an Anti-Spark/Explosion pump designed and built specifically for R-600, Ignition Proof Construction meets ANSI/ISA 12:12.1 The pump can be used to recirculate the solvent through the system increasing speed of processing and yield, or just to reclaim the solvent to greatly increase recovery time to minutes.   Key Features: • CPS TRS21 R-600 Recovery Pump, 2 Cylinder Oil-Less Compressor Specifications:• Recovery Rates: Vapor- 2.5lb/min, Liquid-12lb/min• Ignition Proof Construction ANSI/ISA 12:12.1• Power : 115 VAC, 60 Hz, 10 Amps• Power: 850 watts • Filtration: Internal 100 mesh Screen integrated into Suction Port• Weight : 24 LBS MaintenancePlease note regular maintenance and replacement of seals is NOT covered under warranty as these are normal wear and tear items. Compressor Seals will require re-build after 200-240hrs of operation, depending on use. We stock the following compatible rebuild kits for your convenience: Upgraded TRS21 Rebuild Kits: TRS21 Upgraded Top Piston Assembly TRS21 Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction TRS21 Upgraded Compressor head SS ¼” SAE 45D IN and OUT fittings TRS21 Complete Connecting Rod Assembly Upgrade Kit TRS21 2 Piece Piston Tool CPS Rebuild Kits: TR21X1 Valve Rebuild Kit TR21X2 Complete Rebuild Kit TR21X3 Piston Rebuild Kit TR21X4 Head Rebuild Kit ***DISCLAIMER TO CUSTOMER: Running any solvent that is not authorized by CPS voids all warranty. Running any solvent mixed with any organic plant material will instantly void all warranty. Any Odor coming from the pump or organic plant residuals will also void all warranty.  

    Read more

    $875.00

  • Ai 1-Piece Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Across international Ai 1-Piece Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Ai 1-Piece Glass Trap For Ai T Series -40°C & -80°C Cold Traps Across International one-piece glass trap for Ai 1st Gen T series -40C and -80C cold traps. Features Inlet and outlet: 3/8" hose barb 2" OD x 10" height Glass material: high borosilicate glass 3.3

    Read more

    $50.00

  • Apiezon M grease

    View options

    Apiezon Apiezon M grease

    Apiezon M grease Apiezon M Grease is a silicone and halogen-free high vacuum grease and is ideally suited to all manner of high vacuum applications. Its inherent versatility means M Grease is also frequently used for non-vacuum purposes in both scientific and industrial settings and it is approved for use by NATO. Apiezon M Grease is designed for use in high vacuum environments at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon M Grease is a silicone- and halogen-free high vacuum grease which: does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures exhibits a vapour pressure of 1.7 x 10-9 Torr at 20°C has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As a high vacuum grease with excellent lubrication properties and radiation resistance, Apiezon M Grease is used for many diverse applications. In particular, M Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon M Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon M Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon M Grease this is not a problem. As a halogen-free product, Apiezon M Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, M Grease maintains excellent lubrication properties in high radiation applications, despite a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. Apiezon M Grease has strong powers of absorption, particularly for other hydrocarbon molecules due to its complex hydrocarbon structure and very high molecular weight. Consequently it is frequently used as a stationary phase in gas chromatography. Apiezon M Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $145.00 - $240.00

    View options

  • Apiezon AP101 grease. 50g tube

    Apiezon Apiezon AP101 grease. 50g tube

    Apiezon AP101 grease. 50g tube Apiezon AP101 is a silicone-free, excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications. Apiezon AP101 is a specialist, anti-seize vacuum grease, containing PTFE, which confers superior anti-seize properties providing glass and metal surfaces with long-lasting lubrication and protection from fusing and corrosion. Apiezon AP101 is a silicone-free anti-seize vacuum grease which: is ideally suited for use in low to medium vacuum ranges having a vapour pressure of <10-5 Torr at 20°C has anti-seize properties, making it an effective protector and lubricant for metal surfaces which may be subject to seizure or corrosion is a critical lubricant is insoluble in most solvents, is resistant to water, alcohols, ketones and esters resists attack from aqueous acid and alkali solutions, alcoholic alkali solutions and corrosive gases. is suitable for use over a wide temperature range does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents. Apiezon AP101 with its superior anti-seize properties is typically used to maintain the smooth operation of stopcocks and taps in scientific and industrial settings. Coupled with easy separation of ground or polished glass joints AP101 is an excellent general purpose grease for laboratory use. The value of Apiezon AP101 anti-seize properties is not limited to laboratory or glassware use, but is equally effective when used on metal equipment which may be subject to seizure or corrosion. Just a small amount of AP101 on fastenings which, when exposed to corrosive environments would normally jam solid, will ensure they are protected. Apiezon AP101 is an excellent general purpose grease for sealing joints and is ideal for use in critical lubrication conditions such as highly stressed bearings. Being hydrocarbon based, Apiezon AP101 does not suffer from the problems of “creep” or “carry over” which is traditionally associated with silicone greases. It reduces sample contamination and consequently the risk of interference in analytical techniques such as infra-red and mass spectrometry. Additionally AP101 can be used with confidence in paint spraying and metal deposition processes. To find out more about Apiezon AP101 Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP101 Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $145.00

  • Apiezon AP100 grease. 50g tube

    Apiezon Apiezon AP100 grease. 50g tube

    Apiezon AP100 grease Apiezon AP100 vacuum grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely high levels of lubricity and has been shown to provide eight times the level of lubrication offered by standard, petroleum-based lubricating greases. Apiezon AP100 is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon AP100 Grease is a silicone-free ultra high vacuum lubricating grease which: has anti-seize properties, making it an effective protector and lubricant in ultra-high vacuums exhibits extremely high levels of lubricity demonstrates an extremely low vapour pressure of 7 x 10-11 Torr at 20°C is recommended for use at ambient temperatures does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents The unique properties of Apiezon AP100 lubricating vacuum grease mean it is frequently used to protect stepping motors and gearboxes from corrosion and abrasion, particularly when they are subjected to high load conditions. AP100 is also used to prevent seizure in stopcocks, taps and small metal fastenings. The creep resistance of Apiezon AP100 benefits scientific and semiconductor users alike. AP100 helps to increase the accuracy of analytical techniques and improve yields in semiconductor manufacture by contamination avoidance. In addition, AP100 is used for surface coating applications where silicone contamination can lead to poor surface adhesion and incomplete coating defects. To find out more about Apiezon AP100 grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP100 Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $290.00

You have seen 672 out of 722 products

Show more products

Stainless Steel Fittings, Triclamp Parts, Vacuum Pumps

Our stainless steel fittings and triclamp parts are precision-machined to ensure leak-free connections and secure assembly across a wide range of systems. Whether you're building a custom extractor or upgrading your current setup, these parts are engineered for strength and chemical resistance.

Need reliable vacuum power? Our selection of vacuum pumps includes oil-free and rotary vane models, delivering strong, steady suction for filtration, degassing, or vacuum oven operation. Beyond vacuum pumps, we also offer a variety of circulation pumps, recovery pumps, and the parts and filters you need to keep your pumps running smoothly.

Find the lab hardware you need to support safe, scalable, and repeatable extraction processes: all from a single trusted supplier.

Login

Forgot your password?

Don't have an account yet?
Create account