Shop Components

719 products

Filter

Show previous products

  • 350C 2000RPM 1-Gallon PID Magnetic Stirrer With 7" Heated Plate 350C 2000RPM 1-Gallon PID Magnetic Stirrer With 7" Heated Plate

    View options

    Across International 350C 2000RPM 1-Gallon PID Magnetic Stirrer With 7" Heated Plate

    350C 2000RPM 1-Gallon PID Magnetic Stirrer With 7" Heated Plate A magnetic stirrer or magnetic mixer is a laboratory device that employs a rotating magnetic field to cause a stir bar (also called "flea") immersed in a liquid to spin quickly, thus stirring it. A rotating magnet or a set of stationary electromagnets placed beneath the vessel with the liquid may create a rotating field. Since glass does not affect a magnetic field appreciably (it is transparent to magnetism), and most chemical reactions take place in glass vessels (i.e., see beaker (glassware) or laboratory flasks), magnetic stir bars work well in glass vessels. On the other hand, the limited size of the bar means that magnetic stirrers can only be used for relatively small experiments. They also have difficulty dealing with viscous liquids or thick suspensions. Mechanical stirring is typically needed for larger volumes or more viscous fluids. Magnetic stirrers are often used in chemistry and biology. They are preferred over gear-driven motorized stirrers because they are quieter, more efficient, and have no moving external parts to break or wear out (other than the simple bar magnet itself). Because of its small size, a stirring bar is more easily cleaned and sterilized than other stirring devices. They do not require lubricants, which could contaminate the reaction vessel and the product. They can be used inside hermetically closed vessels or systems without complicated rotary seals. Magnetic stirrers may also include a hot plate or other liquid heating methods.  Model  HP7  Electrical requirements  110V 60Hz 1-Phase, 450 watts  Temperature range  Ambient to 350°C  Heating plate  Diameter: 7 inches Material: ceramic-coated aluminum  Stirring  Min. speed: 110 rpm, max. speed: 2000 rpm Motor power: 40 watts Motor type: brush-less DC motor Max. stirring volume: 1 gallon (3.8 liters, water as media)  Controller  PID control with digital temperature and rotation speed display  External thermocouple  Type: PT100 Cable length: 35 inches Stainless steel probe length: 11 inches Stainless steel probe diameter: 5 mm  Dimensions (WxDxH)  Unit: 7 x 12.5 x 4.5 inches, shipping: 10 x 16 x 9 inches  Weight  Unit: 10 lbs, shipping: 20 lbs  Safety  Thermocouple failure protection Built-in fuse protection  Certification  ETL tested to UL and CSA standards (optional), CE (standard)  Warranty  One year   Standard package    Part description  Quantity Part image  Ai HP7 digital heated magnetic stirrer 1 set  External temperature probe Cable Length: 35”, Probe Length 11” 1 pc  Internal temperature plug 1 pc    Boss head 1 pc    Stainless steel support rod (16 inches) 1 pc    PTFE-coated stir bar 2 pcs    PTFE-coated magnetic stir bar remover 1 pc  4 prong stainless steel clamp opens to 3 1/2" 1 pc    User's manual 1 pc

    Read more

    $450.00 - $600.00

    View options

  • Tube Stub Adapter Tube Stub Adapter

    SSP Corporation Tube Stub Adapter

    Tube Stub Adapter Duolok Tube Stub Adapter, 3/8 Tube Fitting x 1/2 Tube Stub, 316 SS. Body Material 316 SS Connection 1 - Type Tube Fitting Connection 1 - Size 3/8 in Connection 2 - Type Tube Stub Connection 2 - Size 1/2 in Brand Series Duolok Shape Straight End Connections TF x Tube Stub Production Category 1 Handle Type 0 Handle Color  

    Read more

    $30.00

  • Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25 Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25

    View options

    DigiVac Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25

    Bullseye Precision Gauge with Bluetooth | Wireless Vacuum Gauge NPT, KF25 The DigiVac Bullseye Precision Gauge with Bluetooth is the world’s first wireless vacuum gauge featuring one-of-a-kind patented vacuum graphing and DigiVac’s ‘Vacuum Gauge’ app Versatile wireless vacuum gauge that you can monitor right from your phone or tablet (Apple ios and android) Enables remote monitoring and troubleshooting Set low and high alarm from your phone Email vacuum data to document leaks, baseline pressure or pump-downs Use battery power or standard microB-USB power Choose standard Thermocouple Plus sensor or the Upgraded Agilent 531 NPT sensor (this sensor configuration is CE and RoHs compliant), or the Agilent 536 NPT sensor which includes an integrated baffle to extend the life of the sensor by helping to protect it from contamination Portable and Precise Rugged thermocouple vacuum gauge ideal for understanding: Leaks, Pump Downs, Out-gassing or Stable Systems Includes a powerful magnet and kickstand to enable hands-free operation Long battery life and versatility with 12 different measuring units (micron, Torr, Inches of Hg, kPa, Inches of H20, millitorr, mbar, Pa, PSIA, mm of Hg, bar, and mm of H2O) Calibrated under actual vacuum against a NIST standard.  Graphing and Analysis Patented vacuum graphing displays vacuum and time data Visual graphing right on the display that identifies current system status Vacuum Analytics to quickly identify vacuum pressure trends Graphical display for quick determination of vacuum level Bluetooth Bullseye Gauge Applications Vacuum pump testing Baseline vacuum pump performance Transformer dry-out Schlenk line monitoring Botanical oil processing Distillations Vacuum Process Monitoring Technical Specifications Units Torr, mbar, bar, kPa, inHg, mm Hg, millitorr, microns, inches of water, PSI, Pa Control Range 1E-4 – 1000 Torr Range with Accuracy .001-5 Torr Sensor Type Agilent 531 (NPT), Agilent 536 (NPT, KF15, or KF16), VGT500 Dimensions 6.2”H x 3.7”W x 1.3”D Certifications ROHS and CE

    Read more

    $772.21 - $1,127.21

    View options

  • Welch WOB-L Pump 2561

    Welch Vacuum - Gardner Denver Welch WOB-L Pump 2561

     Welch WOB-L Pump 2561 Reliable WOB-L Piston pump is perfect for many common laboratory vacuum applications. Features: Vacuum to 5 Torr (29.8"Hg). Includes Vacuum Regulator and Gauge - simple to adjust and monitor vacuum level. Inlet Water Trap - float ball rises to seal off pump from accidental ingestion of water. Muffler quiets pump and filters discharge air. For use with dry or aqueous vapor applications only. Features: Economical Oil Free Adjustable Vacuum Applications: Vacuum Filtration Many filtrations require only minimal vacuum to proceed; deep vacuum is not required. Vacuum pump flow required is roughly proportional to the total surface area of filters being used. Filtration of particulate-clogging samples can be improved somewhat with deeper vacuum, but a combination of larger filter surface area, smaller samples, and sequential use of decreasing porosity filter papers may also be required for timely filtration. Choose a standard duty vacuum pump for aqueous vapors; use a PTFE pump for resistance to harsh chemicals.  Specifications: Applications Vacuum filtration up to 6 funnel manifold; Lab automation - aspiration of systems utilizing 96 / 256 well format; Welchnet lab installations up to 10 outlet fixtures (geneneral use, filtration) Type Laboratory Vacuum Pump Free Air Displacement cfm (l/min.) @60Hz 3.5(100) Free Air Displacement m3/hr (l/min.) @50Hz 4.9(83) Ultimate Pressure 60(80) Maximum Vacuum 27.6 Max Pressure PSIG (pascal) Motor Horsepower (watts) 1/3(250) Adjustable Vac. / Gas Ballast Yes Tubing Needed 1/4(7) Intake Thread NPT 1/4 Overall Dimensions LxWxH in. (cm) 15.0x10x10 (38.1x25.4x25.4) Ship Weight 24(10.9) Shipping Carton Dimensions LxWxH in. (cm) 21x12x15 (53x30x38) Intake Catch Jar Yes Adjustable Vacuum Knob Vacuum Gauge Dial

    Read more

    $2,000.00

  • Exhaust Silencer Filter For Edwards NXDS Series Vacuum Pumps

    Edwards Exhaust Silencer Filter For Edwards NXDS Series Vacuum Pumps

      Exhaust Silencer Filter For Edwards NXDS Series Vacuum Pumps   Edwards vacuum exhaust silencer for nXDS series vacuum pumps, including nXDS6i(C), nXDS10i(C), nXDS15i(C) and nXDS20i(C) dry scroll pumps when they are not connected to a house exhaust system. These silencers also offer exhaust filtration. Features Compact design combines both filtration efficiency and noise reduction Integrated inlet diffuser optimizes sound attenuation Multi-stage noise reducing features including final stage sound absorbent insert Tubular silencing design - tube is positions to maximize attenuation and air flow while minimizing pressure drop Patented high grade element with built-in butterfly gasket seal which creates positive seal between housing hemispheres and a new seal with each element Seamless drawn housings - no welds to rust or vibrate apart Durable carbon steel construction with black powder coated finish Ability to mount vertically or horizontally   Applications Dry Scroll, Piston, Vane and Venturi Vacuum Pumps Prevent tip seal dust and debris from contaminating the environment Silence irritating pump exhaust noise

    Read more

    $547.00

  • SCILOGEX SCI6-Pro LCD Digital 5.5 x 5.5 in. Magnetic Stirrer, ceramic plate, 110-240V, 50/60Hz US Plug

    Scilogex SCILOGEX SCI6-Pro LCD Digital 5.5 x 5.5 in. Magnetic Stirrer, ceramic plate, 110-240V, 50/60Hz US Plug

    SCILOGEX SCI6-Pro 5.5 x 5.5 in. LCD Digital Magnetic Stirrer, 200-1500rpm SCILOGEX SCI6-Pro 5.5 x 5.5 in. LCD Digital Magnetic Stirrer, 110-240V, 50/60 Hz. SCILOGEX SCIS6-Pro 5.5 x 5.5 in. LCD Digital Magnetic Stirrer Features: Easy to read backlit LCD display, with independent heat and stir display Ceramic plate for chemical resistance and easy clean Brushless DC motor is maintenance free Aluminum cover with ceramic work plate, allows for immediate heat transfer External temperature control is possible with temperature sensor PT1000 Electronic speed control for constant speed even during changes in load Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar Max. stirring quantity of H2O at 5L Digital speed control with max. speed up to 1500rpm cTUVus approved for UL and CSA 2 Year Warranty The new MS6-Pro magnetic stirrer is a very economically priced LCD digital stirrer. Digital Magnetic Stirrer Specifications:   Work plate dimensions (WXD) 140x140mm Work plate material Aluminum cover with ceramic coating Motor type Brushless DC motor Motor input power 2.4W Motor output power 1.8W Power 10W Voltage 100-240V, 50/60Hz Stirring positions 1 Max. stirring quantity[H2O] 5L Max. magnetic bar[length] 50mm Speed range 200-1500rpm Speed display LCD Protection class IP21 Dimension[WxDxH] 320x180×108mm Weight 2.2kg Permissible ambient temperature and humidity 5-40°C, 80%RH Control accuracy of sensor ±20rpm   Additional Resources and Information Downloadable PDFs SCILOGEX Hotplate-Stirrers brochure SCILOGEX SCI6-Pro manual

    Read more

    $320.00

  • SCILOGEX SCI-Spin Stirrer, 100-240V, 50/60Hz, US Plug

    Scilogex SCILOGEX SCI-Spin Stirrer, 100-240V, 50/60Hz, US Plug

    SCILOGEX SCI-Spin Stirrer, 15-1500rpm SCILOGEX SCI-Spin Stirrer, 100-240V, 50/60Hz, US plug Product Features  A wide range of speed from 15-1000rpm Automatic reverse rotation for excellent stirring Protection class (IP65)  PET top provides excellent chemical resistance  Slip-proof and stable Ultra silence and vibration-free  Multi-voltage cTUVus approved for UL and CSA 2 YEAR WARRANTY The Scilogex SCI-Spin Stirrer is an ultra-flat compact stirrer ideal for stirring applications. Its space saving design minimizes bench space and portable due to its light weight. With excellent stirring functionality, the compact shape of FlatSpin takes less bench space and makes storage easier. Product Specifications    Work plate dimension Φ90mm Work plate material PET Motor type Motorless Motor output power 3W Power 5W Voltage 100-120/200-240V,50/60Hz Stirring positions 1 Max. stirring quantity[H2O] 0.8L Max. magnetic bar[length] 40mm Speed range 15-1500rpm Speed display button Protection class IP65 Dimension[WxDxH] 175x120x15mm Weight 0.3kg Permissible ambient temperature and humidity 5-40°C, 80%RH   Additional Resources and Information Downloadable PDFs​  SCI-Spin Stirrer Manual  Hotplate-Stirrers Brochure SCILOGEX SCI-Spin Magnetic Stirrer.mp4 from SCILOGEX on Vimeo.  

    Read more

    $175.00

  • SCILOGEX SCI40-S Overhead LED Digital Stirrer, with s/steel cross stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug SCILOGEX SCI40-S Overhead LED Digital Stirrer, with s/steel cross stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug

    Scilogex SCILOGEX SCI40-S Overhead LED Digital Stirrer, with s/steel cross stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug

    SCILOGEX SCI40-S (40L) LED Digital Overhead Stirrer 50-2200rpm SCILOGEX SCI40-S Overhead LED Digital Stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug (including steel cross-stirrer Part# 1890007, stand sold separately) Product Features A wide range of speed from 50 to 2200rpm Brushless DC motor for long life and maintenance free Analog speed controls displayed on the LED display for monitoring actual speed High torque for viscous medium stirring Over torque protection automatically stops the motor Safety circuits allow for safe stop function in anti-stall or overload condition A through-shaft design allows for easy adjustment of the impeller position  In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns Pass through stirrer rods accepted cTUVus approved for UL and CSA 2 YEAR WARRANTY Product Specifications   Maximum stirring capacity 40L Maximum torque 60Ncm Viscosity maximum 50000mPas Speed range 50-2200rpm Speed display accuracy ± 50rpm Speed display resolution ± 10rpm Chuck diameter range 0.5-10mm Dimensions 3.3W x 8.7H x 7.3D in (83W x.220H x 186D mm) Motor rating input 120W Motor rating output 100W Weight 5.5lbs Motor type brushless DC motor Voltage/Power 100-220V, 50/60 Hz/ 130W Speed/Torque display LED Overload protection display LED lights Protection class IP42 Permissible ambient temperature and humidity 5-40°C, 80%RH   Additional Resources and Information Downloadable PDFs SCI40-S manual SCILOGEX OverheadStirrers brochure SCILOGEX OverheadStirrers Software SCILOGEX SCI20/40-S LED Digital Overhead Stirrer.mp4 from SCILOGEX on Vimeo.  

    Read more

    $1,013.00

  • Neo Diaphragm Replacement Membrane Neo Diaphragm Replacement Membrane

    View options

    Neo Diaphragm Replacement Membrane

    These replacement diaphragms are used in the BVV V-40 diaphragm vacuum pumps. The V-40 has two diaphragms and will need one two pack to do a rebuild on it.

    Read more

    $125.00 - $250.00

    View options

  • Sale -63% High-Polish Quick-Clamp Sanitary Tube Fitting, 304 Stainless Steel Straight Adapter For 2" Tube Od x 2 Npt Male

    High-Polish Quick-Clamp Sanitary Tube Fitting, 304 Stainless Steel Straight Adapter For 2" Tube Od x 2 Npt Male

    For Use With: Air, Water Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM 270

    Read more

    $120.00 $45.00

  • High-Polish Quick-Clamp Sanitary Tube Fitting, 304 Stainless Steel Adapter For 2" Tube Od x 2" Barbed Hose Id

    High-Polish Quick-Clamp Sanitary Tube Fitting, 304 Stainless Steel Adapter For 2" Tube Od x 2" Barbed Hose Id

    For Use With:3-A Certified Fittings: Air, Beverage, Food, WaterAll Other Fittings: Air, Water Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM 270 Specifications Met: See table Fittings with barbed hose end connect flexible hose or tubing to your system. Secure with a hose clamp (sold separately).

    Read more

    $80.00

  • Sale -33% 2" Stubby Buttress to NPT Adaptor 2" Stubby Buttress to NPT Adaptor

    2" Stubby Buttress to NPT Adaptor

     2" Stubby Buttress to NPT Adaptor This adapter converts 2" (50mm) male buttress pipe threads to 2" male NPT pipe threads. The adapter incorporates female buttress threads on one end and male NPT threads on the other for connecting pipes and valves with different ends. Made of tough polypropylene (PP), this adapter also incorporates an ethylene propylene diene monomer (EPDM) gasket for a leak-tight connection. Shallow profile ensures valve does not protrude past IBC tote cage. Key benefits: Converts 2" male buttress pipe thread to a 2" male NPT pipe thread 2" long profile does not protrude past IBC cage during transport Made of PP EPDM gasket ensures a secure seal Suitable for use in a wide variety of liquid handling applications Proudly Made in the USA   Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Disclaimer:  This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. Material PP Dimensions 2.4" Dia. x 1.02" H Weight 0.135 lbs. Case Pack 200 ea. Case Dimensions 15" L x 15" W x 16" H Case Weight 27 lbs. Pallet Pack 4,800 ea. (24 Cases) Pallet Dimensions 40" L x 48" W x 60" H Pallet Weight 648 lbs. Country of Manufacture United States Gasket EPDM Rubber Gasket Note: Color may vary.

    Read more

    $12.00 $8.00

  • Huber adapter M16x1f-1/2"m

    Huber Huber adapter M16x1f-1/2"m

    Huber adapter M16x1f-1/2"m Adapter M16x1 f - R1/2 m Adapter M16x1 f - R1/2 m M16x1 female thread to R1/2 male thread

    Read more

    $155.00

  • Throttle Valves for Pneumatic Presses Throttle Valves for Pneumatic Presses

    Throttle Valves for Pneumatic Presses

    Throttle Valves for Pneumatic Presses Throttle Valve used to control the speed of your pneumatic press. Replace the fitting on the output side of your regulator. Thread Size: 1/2" NPT, Quick Connect Air Hose Size: 12mm

    Read more

    $20.00

  • Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump

    Welch Vacuum - Gardner Denver Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump

    Welch Explosion Proof  CRVpro4 Direct Drive Rotary Vane Vacuum Pump  ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details Explosion Proof Motor 110-120V/208-240V 60Hz 1 Phase The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits:  Runs 10°C cooler than comparable pumps. Slows corrosion.  Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals.  Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts.  The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection.  Suitable applications include freeze drying, degassing, vacuum ovens and concentrators.   3046E-01 comes with an explosion proof motor. Conduit wiring installation required. No cord, plug, or switch provided.  Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr.   Specifications Application CRVpro4 Free Air Displacement @ 60 Hz, cfm (L/min) 2.8 (78) Free Air Displacement @ 50 Hz, m³/hr (L/min) 4 (67) Ultimate Pressure, torr (mbar) 5x10⁻⁴ (4x10⁻⁴) Noise Level, dBA 50 Motor Speed, RPM, @60Hz, @50Hz 1740 (1450) Motor Power, HP (kW) 0.4 (0.5) Oil Capacity, mL 1150 Connection Flanges NW 16 Inlet Hose Connection* 5/8" to 3/4" Weight, lbs (kg) 46.3 (21) Dimensions, LxWxH, in (mm) 18.2x6.1x9.1 (463x157x230)

    Read more

    $5,100.00

  • Sale -34% Compressor Head BARE for BVV Recovery Pump/ CMEP Retrofit Compressor Head BARE for BVV Recovery Pump/ CMEP Retrofit

    Compressor Head BARE for BVV Recovery Pump/ CMEP Retrofit

    This is a replacement compressor head for the BVV2CYL, BVV4CYL, and BVVCMEP-RETRO. It is a full stainless steel head and has all the proper holes drilled to fit on our recovery pumps.

    Read more

    $35.00 $23.00

  • Pump Part - MVP - 60 PSI & Liquid - Access Cover

    Master Vapor Pumps Pump Part - MVP - 60 PSI & Liquid - Access Cover

    Pump Part - MVP - 60 PSI & Liquid - Access Cover All sales final     

    Read more

    $88.00

  • 3′ Fisher American Fume Hood 3′ Fisher American Fume Hood

    View options

    Fisher American 3′ Fisher American Fume Hood

    3′ Fisher American Fume Hood   sku NLS - 301 NLS - 302 NLS - 303 NLS - 304 NLS - 305 NLS-306 Color White White White Blue Blue Blue Fume Hood Exterior Dimensions: Width: 36″ 36″ 36″ 36″ 36″ 36″ Depth: 31 1/2″ 31 1/2″ 31 1/2″ 31.5″ 31 1/2″ 31 1/2″ Height: 54 1/2″ and 89 1/2″ with cabinet 54 1/2″ and 89 1/2″ with cabinet 54 1/2″ and 89 1/2″ with cabinet 54.5″ 54 1/2″ and 89 1/2″ with cabinet 54 1/2″ and 89 1/2″ with cabinet Work Area (Interior) Dimensions: Width: 26″ 26″ 26″ 26″ 26″ 26″ Depth: 23″ 23″ 23″ 23″ 23″ 23″ Height: 46″ 46″ 46″ 46″ 46″ 46″ Fume Hood Accessories: Light on/off Switch Light on/off Switch Light on/off Switch 1 Light on/off Switch Light on/off Switch Light on/off Switch 1 AC Power Plug 1 AC Power Plug 1 AC Power Plug 1 AC Power Plug 1 AC Power Plug 1 AC Power Plug 1 Cold Water Valve 1 Cold Water Valve 1 Cold Water Valve 1 Cold Water Valve 1 Cold Water Valve 1 Cold Water Valve 1 Gas Valve 1 Gas Valve 1 Gas Valve 1 Gas Valve 1 Gas Valve 1 Gas Valve 1 Horizontal sliding glass door 1 Horizontal sliding glass door 1 Horizontal sliding glass door 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 Horizontal sliding glass door 1 Horizontal sliding glass door 1 General Storage 1 ACID Storage 1 Flammable Storage 1 Flammable Storage 1 Acid Storage 1 General Storage

    Read more

    $6,825.00 - $8,525.00

    View options

  • Beaker & Wrench 40L Complete Dosing System

    Beaker & Wrench Beaker & Wrench 40L Complete Dosing System

    Beaker & Wrench 40L Complete Dosing System  Please note: This Product has 1 week lead time    For Wiped Film Evaporators  The 40L Complete Dosing System by Beaker & Wrench® is a continuous feed system that connects to any Wiped Film Evaporator effortlessly. Optimize your time and end results by dialing into your feed system. The Feed Gear Pump by Beaker & Wrench® gives the operator control over flow rate and freedom to load material into the flask without breaking deep vacuum. Once attuned with the flow rate, calculations become less of a guessing game and more of a formula. Distill as slow or as fast as needed!   The contents of this system include: Heated 40L feed flask Crude Cozy™ Digitally operated, heated Feed Gear Pump 4″ tri-clamp port on feed lid Inlet adapter (for your still) 6′ Heated Transfer Line (not pictured) Wattage: 90/ft, 120 Volts Maximum Temp: 150°C UL Listed 3 Channel PID Temperature Controller UL: E510826   How does it work?Crude is loaded into a heated feed flask, which then flows through the heated Gear Pump. The Gear Pump moves fluid through the gears while maintaining vacuum. Oil is then pulled towards the still body, ready for distillation!   Cleaning:Every Operator has their own preference in how they clean their Wiped Film Evaporator. Ethanol, Isopropyl alcohol or vegetable oil are viable options when looking to clean your Wiped Film. Step-by-step instructions are included in the manual!     Installation: Are you interested in having a Beaker & Wrench® technician install your Complete Dosing System? Click here for a quote! The advantage with having a technician perform installation is you can ask any and all questions necessary on how to process with your Wiped Film Evaporator!   What is the warranty?1 year manufacturer’s warranty on parts for exchange. Customer has 5 days from day of delivery to inspect equipment for breakages or damage.     ** Please indicate the inlet size of your still in the Notes section of your purchase. This will help us adapt to your set-up.  

    Read more

    $13,500.00

  • 4" Tri-Clamp U-Bend with 2" Side Port 4" Tri-Clamp U-Bend with 2" Side Port

    4" Tri-Clamp U-Bend with 2" Side Port

    This 4" Tri-Clamp U-Bend is 14" in length from center to center of the 4" ports. There is a 2" port in the middle that is useful to mount sensors, gauges, or sight glasses. The material of this part is 304 Stainless steel.

    Read more

    $300.00

  • BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid

    Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid

    Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid This End Cap comes with (4) Compression connections and (2) 1.5" and (1) Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid. They allow the user to adapt and connect a tube stub connection to the (1) 1/4", (2) 3/8", and (1) 1/2" port on a Tri-Clamp lid and the Tri-Clamp Connections. These 7 connections are welded on a 10" Hemispherical Tri-Clamp End Cap. Specifications Material: 304 Stainless Steel Connection Types: (2) 2" and (1) 1.5" Tri-Clamp with 3" Tube Extension Below Lid on Center Tri-Clamp Port 10" Tri-Clamp (1)1/4", (2) 3/8" and (1)1/2" Female Compression Connections Standard: 3A

    Read more

    $320.00

  • Chemglass #45 Rodaviss Joint Cap w/ Hole

    Chemglass Chemglass #45 Rodaviss Joint Cap w/ Hole

    Chemglass #45 Rodaviss Joint Cap w/ Hole   Threaded cap fits CG-172 outer joint, Rodaviss®. When used with CG-305 Viton o-rings, provides for greaseless high vacuum seal.

    Read more

    $20.00

  • Sale -25% P10 BVV™ Distillation Head - USA Made

    P10 Distillation Head - USA Made

    P10 BVV™ Distillation Head P10 Distillation Head has 2 sets of vigreux in the distillation column with 45/50 lower joint, 24/40 Thermometer Joint, and 34/45 side joint and includes GL-14 barb connections. MADE IN THE USA Designed for 10 Liter Flasks Set of 2 vigreux to allow for more packing media Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media Increased condenser length and diameter for more efficient condensation of vapor with zero clogging *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.  **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    Read more

    $800.00 $600.00

  • Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE

    View options

    Across international Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE

    Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE * UL certification NOT available for the 220V model The new corrosion resistant Ai SuperVac 21 cfm commercial grade vacuum pumps are now UL certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area. SMF-020 Exhaust filter thread size: M24X1.5  

    Read more

    $3,490.00 - $3,590.00

    View options

  • Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump

    View options

    Across International Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump

    Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump   *UL certification NOT available for the 230V model The new Ai SuperVac 11.3 cfm commercial grade vacuum pumps are now UL certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. They are also more powerful (1,100kW vs 750W) and corrosion resistant. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area. SMF-020 Exhaust filter thread size: M24x1.5

    Read more

    $2,590.00 - $2,690.00

    View options

  • Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump

    View options

    Across International Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump

    Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump Ai SuperVac-5C 5.6 cfm commercial grade vacuum pump now come standard with UL certified, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan.  Ai SuperVac-5 dual-stage vacuum pump will take your vacuum down to 0.3 micron in minutes. These pumps are designed for reliable long time continuous operation. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Adjustable gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area.

    Read more

    $1,890.00

    View options

  • Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE

    View options

    Across International Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE

    Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE Vac 9 CFM vacuum pumps are now 110V/220V 50/60Hz switchable and ETL and CE certified. Ai EV9 are dual-stage high speed sliding-vane rotary compact vacuum pump with KF25 vacuum connector. Comes with all necessary fittings and a exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. It is important to note that pumps should always be ran in a well ventilated area. Free KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included.

    Read more

    $790.00

    View options

  • AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE

    View options

    Across International AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE

    AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE Across International EasyVac 7 single-stage sliding-vane rotary compact vacuum pump with 3/8" hose barb vacuum connector. Comes with a 3-foot food grade silicone hose and a exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. It is important to note that pumps should always be ran in a well ventilated area. Free three feet 3/8" white premium food grade silicone vacuum tubing (a $19.99 value) included.  

    Read more

    $590.00

    View options

  • Sale -30% Refurbished GRACO Pneumatic Diaphragm Pump -40C

    Refurbished GRACO Pneumatic Diaphragm Pump -40C

    Graco Pneumatic Diaphragm Pump for Ethanol NOTE: This product has been refurbished and tested to be in good working order. The product may show cosmetic signs of use such as discoloration or minor scratches. This air driven diaphragm pump is designed to be used with ethanol filtration, pumping processes, and BVV Centrifuges. It's unique rugged design can withstand temperatures from -40C to -80C. The inner diaphragms are made out of PTFE and the main body of the pump is made out of 316 Stainless Steel. Specifications -40C -80C Power Source Air Operated 100PSI 28CFM Certification Required No Certifications ATEX Fluid Section Material Stainless Steel Pump Inlet/Outlet 716-3/4 Inc, 16gpm (19mm, 61lpm) Center Section Polypropylene Standard Air Vale (NPT) Porting SST Standard Porting (NPT) Seats 316 SST Balls PTFE Diaphragms PTFE  PTFE Overmolded Manifold O-rings PTFE Max Operating Temp. 220°F (105°C)

    Read more

    $4,000.00 $2,800.00

  • Sale -20% Refurbished - Graco TE30-0342 Electric Driven Double Diaphragm Pump Refurbished - Graco TE30-0342 Electric Driven Double Diaphragm Pump

    Refurbished - Graco TE30-0342 Electric Driven Double Diaphragm Pump

    QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The stainless-steel fluid section is designed to provide a high level of abrasion and corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this electric pump is an energy-saving workhorse that also delivers lower lifetime costs than less efficient pump technologies and is ideal for applications involving materials that are highly abrasive, paints, solvents or heated materials. This additional resilience means less downtime, which in turn provides a new opportunity to improve your bottom line. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback Quiet operation reduces plant noise and improves employee safety and health Smart pump control provides more accurate flow set points and built-in I/O Efficient Electric Motor Powder-coated aluminum electric drive 120 VAC 1Ph motor with 15 ft flying leads CID1 Groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval Materials of Construction Stainless steel fluid section with NPT end port Internal components include 316 stainless steel seat, PTFE ball, PTFE overmold diaphragm and PTFE manifold o-ring

    Read more

    $5,303.00 $4,242.00

  • Sale -30% Industrial filter system with a yellow background

    Refurbished - Pressure Filtration System - 6 x 28 - Bare

    This filter system is designed for high flow rates to filter unwanted precipitates from your oleoresin. The housing provides full enclosure of your filter bags, which are fully supported by the strainer basket within the housing to prevent blowouts. Pressure and high flow rates may be applied to get the fastest flow through filter bags. Using the housing allows full exhaustion of a bag prior to changing it without the sacrifice in filtering time.These filter bag housings use an eye-bolt clamp style to allow for high pressure without leakage, while still maintaining an easy to remove cover. When one filter bag gets filled, it can easily be swapped out by removing the lid while not under pressure and pulling the old bag out. The main seal on the housing is Buna-n rubber. The liquid pump is of 316 Stainless Steel Construction with PTFE seals and runs on compressed air or nitrogen. Built options Include: 1x 304 Stainless Steel Filter Bag Housing 1x 304 Stainless Steel Basket 1x 304 Stainless Steel Displacement Cylinder With Pump options Include: 1x 304 Stainless Steel Filter Bag Housing 1x 304 Stainless Steel Basket 1x 304 Stainless Steel Displacement Cylinder 1x 316 Stainless Steel Liquid pump Connecting hose or hardline tubing 4x Nomex Filter Bags (1μm, 5μm, 25μm, and 100μm)   Specifications PFS-790-15 PFS-790-45 Flow Rate (GPM) ≤15 ≤45 Max Pressure (PSI) 100 @28 CFM Volume (in^3) 790 Working Temperature (°C) -40 - 100 Air Hose Connection ¼” JIC Flare ½” JIC Flare Filter Bag Housing Dimensions (LxWxH) 14” x 11” x 41” Filter Bag Trade Size #8 Included PVC Hose size ID ¾” 1”   *This unit requires an air compressor for operation (not included)

    Read more

    $680.00 $475.00

  • 48" Jacketed Collection Column (6" Tri-Clamp) 48" Jacketed Collection Column (6" Tri-Clamp)

    48" Jacketed Collection Column (6" Tri-Clamp)

    This column can be used as a collection or solvent vessel for a larger rack mounted extractor. The top and bottom tri clamp size are 6" to allow for a higher pressure rating on the entire vessel. The midsection of the spool expands from 6" at the tri-clamp connection to a 10" column. The jacket of the vessel is baffled and has 1.5" Tri-Clamp* ports to run fluid through for good temperature control. This column is intended to hold 55lbs of hydrocarbon solvent, it can be rack mounted with 12" pipe hangers. Max Pressure: 300psi @70°F (dependent on clamp used) Material: 304 Stainless Steel Capacity: 55 Liters Height: 48" BVV™ 600E1000X48FJ - Drawing  *Photos show a different jacket connection, please see the above drawing for changes to this item

    Read more

    $1,800.00

  • 1.5" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner 1.5" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner

    View options

    2" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner

    2" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner This premium industrial hose assembly delivers superior performance in chemical processing and high-pressure fluid transfer applications. The convoluted PTFE liner provides exceptional chemical compatibility and flexibility, while the 304 stainless steel braid ensures structural strength and durability. Tri-Clamp end connections enable quick, reliable system integration. Performance Specifications: Connection Type 2" Tri-Clamp Liner Material PTFE (Teflon) Braid & Flanges 304 Stainless Steel Temperature Range -65°F to 450°F Pressure Rating 580 PSI Chemical Resistance Excellent Bend Radius 13" (24" length) / 5.5" (48"-96" lengths) Critical Operating Guidelines: Maintain bend radius specifications to prevent PTFE liner kinking and loss of hose integrity. The 24" version accommodates 90-degree bends only.

    Read more

    $275.00 - $525.00

    View options

  • Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps

    Across International Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps

    Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps Across International 500mL glass trap for Ai 2nd Gen T40 -40C cold traps. Upward hose barb ports give you safer and easier vacuum tubing connection and removal. Features Fully openable for easy cleaning Inlet and outlet: 3/8" hose barb Joint type: 45/50 standard taper 2" OD x 15" height Glass material: high borosilicate glass 3.3

    Read more

    $200.00

  • Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Across International Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps cross International glass trap for Ai 1st Gen T series -40C and -80C cold traps. Features Fully openable for easy cleaning Inlet and outlet: 3/8" hose barb Joint type: 34/45 standard taper 2" OD x 10" height Glass material: high borosilicate glass 3.3

    Read more

    $120.00

  • TRS21 Anti-spark/explosion pump Standard

    TRS21 Anti-spark/explosion pump Standard

    The TRS21 is an Anti-Spark/Explosion pump designed and built specifically for R-600, Ignition Proof Construction meets ANSI/ISA 12:12.1 The pump can be used to recirculate the solvent through the system increasing speed of processing and yield, or just to reclaim the solvent to greatly increase recovery time to minutes.   Key Features: • CPS TRS21 R-600 Recovery Pump, 2 Cylinder Oil-Less Compressor Specifications:• Recovery Rates: Vapor- 2.5lb/min, Liquid-12lb/min• Ignition Proof Construction ANSI/ISA 12:12.1• Power : 115 VAC, 60 Hz, 10 Amps• Power: 850 watts • Filtration: Internal 100 mesh Screen integrated into Suction Port• Weight : 24 LBS MaintenancePlease note regular maintenance and replacement of seals is NOT covered under warranty as these are normal wear and tear items. Compressor Seals will require re-build after 200-240hrs of operation, depending on use. We stock the following compatible rebuild kits for your convenience: Upgraded TRS21 Rebuild Kits: TRS21 Upgraded Top Piston Assembly TRS21 Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction TRS21 Upgraded Compressor head SS ¼” SAE 45D IN and OUT fittings TRS21 Complete Connecting Rod Assembly Upgrade Kit TRS21 2 Piece Piston Tool CPS Rebuild Kits: TR21X1 Valve Rebuild Kit TR21X2 Complete Rebuild Kit TR21X3 Piston Rebuild Kit TR21X4 Head Rebuild Kit ***DISCLAIMER TO CUSTOMER: Running any solvent that is not authorized by CPS voids all warranty. Running any solvent mixed with any organic plant material will instantly void all warranty. Any Odor coming from the pump or organic plant residuals will also void all warranty.  

    Read more

    $875.00

  • Ai 1-Piece Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Across international Ai 1-Piece Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Ai 1-Piece Glass Trap For Ai T Series -40°C & -80°C Cold Traps Across International one-piece glass trap for Ai 1st Gen T series -40C and -80C cold traps. Features Inlet and outlet: 3/8" hose barb 2" OD x 10" height Glass material: high borosilicate glass 3.3

    Read more

    $50.00

  • Apiezon Q Sealing Compound

    Apiezon Apiezon Q Sealing Compound

    Apiezon Q Sealing Compound Apiezon Q Compound sealant can be used to seal around the edges of flat unground joints, to blank off parts of an apparatus temporarily or to seal glass cylinders to metal plates to produce temporary vacuum enclosures. Whether sealing joints, filling in holes or filling gaps in a vacuum system, it is extremely versatile and is the ideal leak sealant in a wide array of uses and industries. Temporary vacuum sealant Versatile product suitable for a multitude of uses Excellent waterproof medium Easy to use and to remove Ambient temperatures (10 to 30°C) 10 year shelf life MSDS Technical Data Sheet

    Read more

    $300.00

  • Apiezon M grease

    View options

    Apiezon Apiezon M grease

    Apiezon M grease Apiezon M Grease is a silicone and halogen-free high vacuum grease and is ideally suited to all manner of high vacuum applications. Its inherent versatility means M Grease is also frequently used for non-vacuum purposes in both scientific and industrial settings and it is approved for use by NATO. Apiezon M Grease is designed for use in high vacuum environments at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon M Grease is a silicone- and halogen-free high vacuum grease which: does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures exhibits a vapour pressure of 1.7 x 10-9 Torr at 20°C has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As a high vacuum grease with excellent lubrication properties and radiation resistance, Apiezon M Grease is used for many diverse applications. In particular, M Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon M Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon M Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon M Grease this is not a problem. As a halogen-free product, Apiezon M Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, M Grease maintains excellent lubrication properties in high radiation applications, despite a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. Apiezon M Grease has strong powers of absorption, particularly for other hydrocarbon molecules due to its complex hydrocarbon structure and very high molecular weight. Consequently it is frequently used as a stationary phase in gas chromatography. Apiezon M Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $145.00 - $240.00

    View options

  • Apiezon L grease. 25g tube

    Apiezon Apiezon L grease. 25g tube

    Apiezon L grease. 25g tube Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease suitable for use scientific and industrial applications. Apiezon L Grease has the best vapour pressure properties of all the Apiezon products and is therefore suitable for use in ultra-high vacuum applications. L Grease is regularly used by highly respected organisations such as The European Space Agency, NASA and NATO. Apiezon L Grease is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease which: exhibits an extremely low vapour pressure of 7 x 10-11 Torr at 20°C does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As an ultra-high vacuum grease with excellent lubrication properties and radiation resistance Apiezon L Grease is used for many diverse applications. In particular, L Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon L Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon L Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon L Grease this is not a problem. As a halogen-free product Apiezon L Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, L Grease maintains excellent lubrication properties in high radiation applications, demonstrating only a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. To find out more about Apiezon L Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon L Grease Vapour Pressure Graph MSDA Techinical Data Sheet

    Read more

    $210.00

  • Apiezon AP101 grease. 50g tube

    Apiezon Apiezon AP101 grease. 50g tube

    Apiezon AP101 grease. 50g tube Apiezon AP101 is a silicone-free, excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications. Apiezon AP101 is a specialist, anti-seize vacuum grease, containing PTFE, which confers superior anti-seize properties providing glass and metal surfaces with long-lasting lubrication and protection from fusing and corrosion. Apiezon AP101 is a silicone-free anti-seize vacuum grease which: is ideally suited for use in low to medium vacuum ranges having a vapour pressure of <10-5 Torr at 20°C has anti-seize properties, making it an effective protector and lubricant for metal surfaces which may be subject to seizure or corrosion is a critical lubricant is insoluble in most solvents, is resistant to water, alcohols, ketones and esters resists attack from aqueous acid and alkali solutions, alcoholic alkali solutions and corrosive gases. is suitable for use over a wide temperature range does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents. Apiezon AP101 with its superior anti-seize properties is typically used to maintain the smooth operation of stopcocks and taps in scientific and industrial settings. Coupled with easy separation of ground or polished glass joints AP101 is an excellent general purpose grease for laboratory use. The value of Apiezon AP101 anti-seize properties is not limited to laboratory or glassware use, but is equally effective when used on metal equipment which may be subject to seizure or corrosion. Just a small amount of AP101 on fastenings which, when exposed to corrosive environments would normally jam solid, will ensure they are protected. Apiezon AP101 is an excellent general purpose grease for sealing joints and is ideal for use in critical lubrication conditions such as highly stressed bearings. Being hydrocarbon based, Apiezon AP101 does not suffer from the problems of “creep” or “carry over” which is traditionally associated with silicone greases. It reduces sample contamination and consequently the risk of interference in analytical techniques such as infra-red and mass spectrometry. Additionally AP101 can be used with confidence in paint spraying and metal deposition processes. To find out more about Apiezon AP101 Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP101 Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $145.00

  • Apiezon AP100 grease. 50g tube

    Apiezon Apiezon AP100 grease. 50g tube

    Apiezon AP100 grease Apiezon AP100 vacuum grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely high levels of lubricity and has been shown to provide eight times the level of lubrication offered by standard, petroleum-based lubricating greases. Apiezon AP100 is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon AP100 Grease is a silicone-free ultra high vacuum lubricating grease which: has anti-seize properties, making it an effective protector and lubricant in ultra-high vacuums exhibits extremely high levels of lubricity demonstrates an extremely low vapour pressure of 7 x 10-11 Torr at 20°C is recommended for use at ambient temperatures does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents The unique properties of Apiezon AP100 lubricating vacuum grease mean it is frequently used to protect stepping motors and gearboxes from corrosion and abrasion, particularly when they are subjected to high load conditions. AP100 is also used to prevent seizure in stopcocks, taps and small metal fastenings. The creep resistance of Apiezon AP100 benefits scientific and semiconductor users alike. AP100 helps to increase the accuracy of analytical techniques and improve yields in semiconductor manufacture by contamination avoidance. In addition, AP100 is used for surface coating applications where silicone contamination can lead to poor surface adhesion and incomplete coating defects. To find out more about Apiezon AP100 grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP100 Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $290.00

  • Viton O-Ring For 24/40 Ground Joint

    Viton O-Ring For 24/40 Ground Joint

    Replacement viton (FKM) o-ring for 24/40 ground glass joints with an o-ring style seal

    Read more

    $4.00

  • Sale -25% 6" - 4" Hemi Reducing Elbow 6" - 4" Hemi Reducing Elbow

    6" - 4" Hemi Reducing Elbow

    This tri clamp 6” - 4” reducing end cap has a 90 degree bed that works well for the base of heat exchangers and also in falling film evaporators. 

    Read more

    $200.00 $150.00

  • Sale -33% Glas-Col Thermocouple Type "J"

    Glas-Col Glas-Col Thermocouple Type "J"

    1/4" x 12" 72" leads, mini plug

    Read more

    $135.00 $90.00

  • Sale -36% Mastercool 5 CFM Dual Stage Vacuum Pump--USA Made

    Mastercool Mastercool 5 CFM Dual Stage Vacuum Pump--USA Made

    The Mastercool 90065 2-Stage Vacuum Pump is durable and time-tested to stand up to the most grueling conditions and will provide years of reliable service. This model is an excellent choice for small to medium-sized systems with a 2.5 lb. to 10 lb. charge capacity. Electrical: 110V, 60 Hz Stages: 2 Free Air Displacement: 5 CFM Motor: 1/3 HP Oil Capacity: 18 oz.

    Read more

    $350.00 $225.00

  • Sale -40% 1/2 in. Tube Fitting x 1/4-18 MNPT, 316 SS

    SSP Corporation 1/2 in. Tube Fitting x 1/4-18 MNPT, 316 SS

    Body Material 316 SS Connection 1 - Type Tube Fitting Connection 1 - Size 1/2 in Connection 2 - Type Male National Pipe Thread Connection 2 - Size 1/4-18 Brand Series Duolok Shape Elbow End Connections TF x MNPT Production Category 1 End Connection Type Duolok Tube End by Male National Pipe Thread

    Read more

    $25.00 $15.00

  • 350C 2000RPM 0.8-Gallon PID Magnetic Stirrer 5.5" Heated Plate 350C 2000RPM 0.8-Gallon PID Magnetic Stirrer 5.5" Heated Plate

    View options

    Across International 350C 2000RPM 0.8-Gallon PID Magnetic Stirrer 5.5" Heated Plate

    350C 2000RPM 0.8-Gallon PID Magnetic Stirrer 5.5" Heated Plate A magnetic stirrer or magnetic mixer is a laboratory device that employs a rotating magnetic field to cause a stir bar (also called "flea") immersed in a liquid to spin quickly, thus stirring it. A rotating magnet or a set of stationary electromagnets placed beneath the vessel with the liquid may create a rotating field. Since glass does not affect a magnetic field appreciably (it is transparent to magnetism), and most chemical reactions take place in glass vessels (i.e., see beaker (glassware) or laboratory flasks), magnetic stir bars work well in glass vessels. On the other hand, the limited size of the bar means that magnetic stirrers can only be used for relatively small experiments. They also have difficulty dealing with viscous liquids or thick suspensions. Mechanical stirring is typically needed for larger volumes or more viscous fluids. Magnetic stirrers are often used in chemistry and biology. They are preferred over gear-driven motorized stirrers because they are quieter, more efficient, and have no moving external parts to break or wear out (other than the simple bar magnet itself). Because of its small size, a stirring bar is more easily cleaned and sterilized than other stirring devices. They do not require lubricants, which could contaminate the reaction vessel and the product. They can be used inside hermetically closed vessels or systems without complicated rotary seals. Magnetic stirrers may also include a hot plate or other liquid heating methods.    Model  HP5  Electrical requirements  110V 60Hz 1-Phase, 450 watts  Temperature range  Ambient to 350°C  Heating plate  Diameter: 5.5 inches Material: ceramic-coated aluminum  Stirring  Min. speed: 110 rpm, max. speed: 2000 rpm Motor power: 40 watts Motor type: brush-less DC motor Max. stirring volume: 0.8 gallons (3 liters, water as media)  Controller  PID control with digital temperature and rotation speed display  External thermocouple  Type: PT100 Cable length: 35 inches Stainless steel probe length: 11 inches Stainless steel probe diameter: 5 mm  Dimensions (WxDxH)  Unit: 6.5 x 12 x 4.25 inches, shipping: 16 x 9.5 x 7.5 inches  Weight  Unit: 9 lbs, shipping: 18 lbs  Safety  Thermocouple failure protection Built-in fuse protection  Certification  ETL tested to UL and CSA standards (optional), CE (standard)  Warranty  One year     Standard package    Part description  Quantity Part image  Ai HP5 digital heated magnetic stirrer 1 set    External temperature probe Cable Length: 35", Probe Length 11" 1 pc  Internal temperature plug 1 pc    Boss head 1 pc    Stainless steel support rod (16 inches) 1 pc    PTFE coated stir bar 2 pcs    PTFE-coated magnetic stir bar remover 1 pc  4 prong stainless steel clamp opens to 3 1/2" 1 pc    User's manual 1 pc

    Read more

    $380.00 - $530.00

    View options

You have seen 672 out of 719 products

Show more products

Stainless Steel Fittings, Triclamp Parts, Vacuum Pumps

Our stainless steel fittings and triclamp parts are precision-machined to ensure leak-free connections and secure assembly across a wide range of systems. Whether you're building a custom extractor or upgrading your current setup, these parts are engineered for strength and chemical resistance.

Need reliable vacuum power? Our selection of vacuum pumps includes oil-free and rotary vane models, delivering strong, steady suction for filtration, degassing, or vacuum oven operation. Beyond vacuum pumps, we also offer a variety of circulation pumps, recovery pumps, and the parts and filters you need to keep your pumps running smoothly.

Find the lab hardware you need to support safe, scalable, and repeatable extraction processes: all from a single trusted supplier.

Login

Forgot your password?

Don't have an account yet?
Create account