EVERY PRODUCT BUT HYDRO FOR WHOLESALE STORE
NEO Oven Needle Valve
NEO Oven Needle Valve Replacement Needle valve for vacuum shut off for NEOCISION vacuum ovens
$35.00
Chemglass #45 Rodaviss Joint Cap w/ Hole
Chemglass #45 Rodaviss Joint Cap w/ Hole Threaded cap fits CG-172 outer joint, Rodaviss®. When used with CG-305 Viton o-rings, provides for greaseless high vacuum seal.
$18.00
BVV Brewing SS304 Parrot
BVV Brewing SS304 Parrot SS304 Parrot w 3/4" TC Drain Port High quality product collector (also known as parrot or parrot body) made of stainless steel. This essential part of a still can easily be mounted with tri-clamps. Shape and angle of the product outlet take care of a clean fluid friction directly into a collection jar or funnel. Specifications Material: Stainless Steel Weight 1.10 Height 10.11-inch Connection 1 3/4 " Tri-Clamp Connection 2 3/4 " Tri-Clamp (with 3/8" bore)
$90.00$60.00
Beaker & Wrench 40L Complete Dosing System
Beaker & Wrench 40L Complete Dosing System Please note: This Product has 1 week lead time For Wiped Film Evaporators The 40L Complete Dosing System by Beaker & Wrench® is a continuous feed system that connects to any Wiped Film Evaporator effortlessly. Optimize your time and end results by dialing into your feed system. The Feed Gear Pump by Beaker & Wrench® gives the operator control over flow rate and freedom to load material into the flask without breaking deep vacuum. Once attuned with the flow rate, calculations become less of a guessing game and more of a formula. Distill as slow or as fast as needed! The contents of this system include: Heated 40L feed flask Crude Cozy™ Digitally operated, heated Feed Gear Pump 4″ tri-clamp port on feed lid Inlet adapter (for your still) 6′ Heated Transfer Line (not pictured) Wattage: 90/ft, 120 Volts Maximum Temp: 150°C UL Listed 3 Channel PID Temperature Controller UL: E510826 How does it work?Crude is loaded into a heated feed flask, which then flows through the heated Gear Pump. The Gear Pump moves fluid through the gears while maintaining vacuum. Oil is then pulled towards the still body, ready for distillation! Cleaning:Every Operator has their own preference in how they clean their Wiped Film Evaporator. Ethanol, Isopropyl alcohol or vegetable oil are viable options when looking to clean your Wiped Film. Step-by-step instructions are included in the manual! Installation: Are you interested in having a Beaker & Wrench® technician install your Complete Dosing System? Click here for a quote! The advantage with having a technician perform installation is you can ask any and all questions necessary on how to process with your Wiped Film Evaporator! What is the warranty?1 year manufacturer’s warranty on parts for exchange. Customer has 5 days from day of delivery to inspect equipment for breakages or damage. ** Please indicate the inlet size of your still in the Notes section of your purchase. This will help us adapt to your set-up.
$12,500.00
Polyscience 3 HP High Capacity Chiller; Air-Cooled - Up to 10.5kW @ 20°C
Polyscience 3 HP High Capacity Chiller; Air-Cooled - Up to 10.5kW @ 20°C Key Specifications Description: 3 HP Chiller; Air-Cooled; Up to 10.5kW @ 20°C Display: LED Connectivity: Standard: RS232; Optional: RS485 Working Temperature Range °C: 5° to 35° Temperature Stability °C: ±0.5° Temperature Calibration Capability: 1-point Key Features Chillers 2HP and up are not available outside of the United States High capacity cooling for lasers, EDM equipment, injection molding, and other heat removal applications Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled (3 HP models) Wide variety of pump options available Common Specifications Working Temperature Range °F 41° to 95° Working Temperature Range °C 5° to 35° Cooling Capacity Up to 10.5kW @ 20°C Reservoir Capacity (gallons) 7 Reservoir Capacity (liters) 26.5 Reservoir/Tank Material Contact PolyScience for Options Reservoir Cover Screw-on Cap Cleanable Air Filter Yes Cleanable Fluid Filter Yes Temperature Stability °F ±0.9° Temperature Stability °C ±0.5° Display LED Display Resolution (Read) 0.1 Pump Type Contact PolyScience for Options Process Connections 3/4" (F) NPT Over-Temperature Protection / Failsafe Heater Control Yes Reservoir Liquid Level Indicator Yes Cool Command Refrigeration Technology Yes Reservoir Drain Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 30.5 x 37 x 42 in Overall Dimensions (L x W x H) (cm) 78 x 94 x 107 cm Compressor Size (HP) 3 Refrigerant R134a Shipping Weight (pounds) 570.0 Shipping Weight (kilograms) 259.0 Catalog Page Number 105 Operator's Manual PDF Version
$15,350.00
Pump Part - MVP - 60 PSI & Liquid - Access Cover
Pump Part - MVP - 60 PSI & Liquid - Access Cover All sales final
$61.25
Pump Part - MVP - 60 PSI & Liquid - Spider Coupler
Pump Part - MVP - 60 PSI & Liquid - Spider Coupler All sales final
$132.00
Pump Part - MVP - Liquid - Stainless Steel - Ball & O-Ring Set
Pump Part - MVP - Liquid - Stainless Steel - Ball & O-Ring Set All sales final
$249.00
Pump Part - MVP - Liquid - Stainless Steel Seat
Pump Part - MVP - Liquid - Stainless Steel Seat All sales final
$239.50
J-KEM Model 150
J-KEM Model 150 An ideal controller for applications that don’t require the precise regulation of J-KEM’s 200-Series controllers. This compact unit packs 1200 watts of power, sufficient for 5 L heating mantles, many ovens, and other devices. Built with J-KEM’s state-of-the-art PID process controller, but does not contain J-KEM’s power control computer. Specifications: 120vac, 10 amps, 1200 wattsWarranty: 2 Years The temperature range desired determines the probe/thermocouple type: J [black] (0 – 800° C) K [yellow] (-50 – 1200° C) T [blue] (-200 – 250° C) Weight: 4 Dimensions: 5.4 x 3.75 x 2.5 in PURCHASE WITH OR WITHOUT SYSTEM ACCESSORIES Complete system includes: one controller, one Teflon thermocouple (12″ long, 1/8″ diameter), one connecting cord, and one 14/20 joint adapter.
$608.17 - $764.00
Beaker & Wrench Outlet Pump
Beaker & Wrench Outlet Pump Outlet pump comes with: – motor– heater/pump controller– mounting– adapter hose (heated)– pump (heated) – 24/40 adapters. If you need custom please purchase custom adapters separately. Pumps are sold EACH. If you need two, the total is $14,000.
$7,200.00
So-Low Cryogenic Storage Systems 47 liters LN2 Tank w/ Fiberboard Boxes
So-Low Cryogenic Storage Systems 47 liters LN2 Tank w/ Fiberboard Boxes Please note: This Product may carry up to an 8 week lead time! Description These Dewars are designed for the storing of cryovials in racks containing 25-cell or 100-cell boxes in liquid nitrogen. Easy to operate, the snap on cap and necktube core assure positive closure and easy access without unnecessary exposures to the cryogen. Constructed from materials of the highest performance and quality including an aluminum exterior, these containers are not only rugged, robust, and dependable, but also have very high thermal efficiencies. Numbered rack system allows easy location and quick retrieval of samples. Limited opening maintain low vapor temperatures of -185°C and provides economical evaporation rates. A locking provision for the lid is supplied for added security. These units are backed by a one year parts and labor warranty and a three year vacuum warranty. Units come complete with stainless steel racks and either polycarbonate or fiberboard boxes. Product Specifications 47 Liter Cryogenic Storage System. Designed for the storage of cryovials in racks containing 25-cell or 100-cell boxes. Numbered rack system allows easy location and quick retrieval of samples. Limited opening maintain low vapor temperatures of -185°C and provides economical evaporation rates. A locking provision for the lid is supplied for added security. These units are backed by a one year parts and labor warranty and a three year vacuum warranty. Units come complete with stainless steel racks and either polycarbonate or fiberboard boxes. Features Capacity 47 Liters Vail Capacity 750 (2ML) Box Capacity 30 Rack Capacity 6 (Included) Vial Per Box 25 Evaporate Rate .39 Liters/ Day Working Time 76 Days Neck Diameter 5inch Exterior Height 26.5inch Exterior Diameter 20inch
$3,610.00
So-Low Explosion Proof Refrigerators (Manual Defrost) 30 cubic ft. DHH4-30SDRX
So-Low Explosion Proof Refrigerators (Manual Defrost) 30 cubic ft. DHH4-30SDRX Please note: This Product may carry up to an 8 week lead time! Description Hazardous Location Refrigerators(+4°C) are designed to meet National Fire Protection Agency (NFPA) and OSHA guidelines for the refrigerated storage of volatile and non-volatile materials in Hazardous Locations, Class 1, Division II, Group C & D. Power cord is not included. Final power connections at site must be hardwired to meet local codes. All spark generating electrical components and connections (compressor, thermostat) are isolated and sealed in vapor-proof enclosures. Electrical wiring is hardwired for additional safety measures. So-Low's various Explosion Proof / Manual Defrost Freezers, Refrigerators, and Combination units, offer a diverse range of options to fit your needs for Explosion Proof products. Ranging from 11 cubic feet to 30 cubic feet, these units are ideal for products of any size. Two inch solid urethane foam insulated doors, sturdy cam-lift hinges, and "lock-open" feature for "hands-free" access provide a secure and sturdy environment. Features 22 Gauge Cold Roll Steel Exterior 26 Gauge Galvanized Steel Interior High Luster Baked Enamel Surface Coating 2-3/8 inch (6cm) Urethane insultation 2-Inch Solid Urethane Foam Insulated Doors Sturdy Cam-Lift Hinges With Lock-Open Feature Adjustable Cantilever Shelves (Epoxy Coated) 6-Inch Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat Manual Defrost UL Listed Product Specification Manufacturer So-Low Temperature Range 1°C to 10°C Capacity 30 cubic ft. Exterior w x d x h (inches) 35'' x 35'' x 72'' Interior w x d x h (inches) 32'' x 22.5'' x 65'' Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves Five adjustable epoxy coated Insulation Polyurethane foam Refrigerant R134A CFC free Compressor 1/2 hp Evaporator Cold Wall Thermostat Exterior adjustable Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 7/15 Supply Plug none/ hardwired Shipping weight 575 lbs
$8,440.00
So-Low Flammable Material Storage Freezer 30 cubic ft. DHH20-30SDFMS
So-Low Flammable Material Storage Freezer 30 cubic ft. DHH20-30SDFMS Please note: This Product may carry up to an 8 week lead time! Description: Flammable Freezers are designed to meet National Fire Protection Agency NFPA and OSHA guidelines for the frozen (-20°C) storage of flammable (volatile) material storage in general laboratory work areas.Upright and undercounter models. Designed exclusively to control flammable material, The So-Low Flammable Material Storage Freezers and Refrigerators are ideal for storage of any flammable material products. There are no electrical components located in the interior of the unit and the compressor's electrical components have been sealed in a vapor-proof enclosure for additional safety. Units are supplied with a power cord to ease installation. Temperature control and temperature recorder options allow for an individualized intensity of temperature control and monitoring. Adjustable legs and shelves add more availability and storage options to fit your laboratories needs. Features: Solid Polyurethane Foam Insulated Doors Epoxy Coated Shelves Adjustable Shelves Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat Manual Defrost UL Listed Product Specification Manufacturer So-Low Temperature Range -15°C to -20°C Capacity 30 cubic ft. Exterior w x d x h (inches) 35'' x 35'' x 72'' Interior w x d x h (inches) 32'' x 22.5'' x 65'' Temperature Control Exterior Adjustable Mechanical Door Single Solid, locking Interior Finish Anodized aluminum Casters Four Leveling Legs Shelves Three, Fixed Shelves Insulation Polyurethane foam Refrigerant R404A CFC free Compressor 1/3 hp Condenser Hot Wall Evaporator Cold Wall Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 7/15 Supply Plug 5-15P NEMA UL listed Shipping weight 375 lbs. Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor. Specification Data Sheet
$9,500.00
So-Low Flammable Material Storage Refrigerators 1°C to 10°C, 14 Cu.Ft, MV4-6UCFMSR
So-Low Flammable Material Storage Refrigerators 1°C to 10°C, 14 Cu.Ft, MV4-6UCFMSR Please note: This Product may carry up to an 11 week lead time! Our Flammable Refrigerators and Freezers are designed to meet National Fire Protection Agency NFPA and OSHA guidelines for the refrigerated storage of flammable (volatile) material storage in general laboratory work areas. Designed exclusively to control flammable material, The So-Low Flammable Material Storage Freezers and Refrigerators are ideal for storage of any flammable material products. There are no electrical components located in the interior of the unit and the compressor's electrical components have been sealed in a vapor-proof enclosure for additional safety. Units are supplied with a power cord to ease installation. Temperature control and temperature recorder options allow for an individualized intensity of temperature control and monitoring. Adjustable legs and shelves add more availability and storage options to fit your laboratories needs. Features Solid Polyurethane Foam Insulated Doors Epoxy Coated Shelves Adjustable Shelves Adjustable Legs CFC-Free Refrigerant and Insulation Adjustable Thermostat Manual Defrost UL Listed Product Specification Manufacturer So-Low Temperature Range 1°C to 7°C Capacity 6.1 Cufic Feet Exterior w x d x h (inches) 23.625" x 24.25" x 32.187" Exterior w x d x h (cm) 68 x 62 x 82 Door Single Solid, locking Interior Finish Anodized aluminum Leg Four Leveling Legs Insulation Polyurethane foam Refrigerant R134A CFC free Compressor 1/5 hp Condenser Static Defrost Manual Voltage:Domestic 115/60/1 Running Amps/Breaker 2.5/15 Supply Plug 5-15P NEMA UL listed Shipping weight 150lbs Warranty -(Domestic) 12 months parts and labor Compressors additional 4 years, no labor. Specification Data Sheet
$2,160.00
Julabo CORIO CP-201F
Julabo CORIO CP-201F Call for lead time Refrigerated Circulators from the CORIO CP range are suitable for applications with a temperature range up to +200°C. The enhanced pump performance ensures they are suitable for easy temperature control tasks in combination with external applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over (internal and external circulation) External pump connections (M16x1) USB & RS232 connection Space-saving cooling coil design yields more usable space in the bath tank Bath lid and drain tap included Removable ventilation grid Refrigeration unit without side vents Class III (FL) according to DIN 12876-1 Technical Data Order No. 9013702 Model series CORIO Category Refrigerated - Heating Circulators Working temperature range (°C) -20 ... +200 Temperature control PID Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0-1 °C Temperature Display LED Heating capacity (kW) 1 Cooling capacity (Medium Ethanol) °C 200 20 10 0 -10 -20 kW 0.2 0.2 0.17 0.15 0.1 0.02 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 5.1 x 5.9 / 5.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 3 ... 4 Refrigerant stage 1 R134a Filling volume refrigerant stage 1 (g) 70 Global Warming Potential for 1430 Carbon dioxide equivalent stage 1 (t) 0.1 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 17.3 x 16.1 x 17.3 Weight (LBS) 54.5 Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Bath tank Stainless steel Bath cover integrated Cooling of compressor Air Manual
$6,206.83
Julabo CORIO CP-BC12
Julabo CORIO CP-BC12 Call for lead time CORIO heating circulators feature professional technology for high standards. These units facilitate internal temperature control in the bath tank or control of externally connected applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over between internal and external circulation USB & RS232 connection High-quality bath tanks made of stainless steel with bath lid and drain tap Integrated cooling coil for counter-cooling Technical Data Order No. 9013512 Model series CORIO Category Heating Circulators Working temperature range (°C) +20 ... +200 Temperature stability (°C) ±0.02 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 8.7 x 5.9 / 7.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 8.5 ... 12 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 29.9 x 52 Weight (LBS) 13 x 19.3 x 18.5 Description Built-in cooling coil for tap water connection for temperature applications below or near ambient temperatures are integrated. Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Cooling coil integrated Bath tank Stainless steel Bath cover integrated Manual
$4,653.00
Julabo CORIO CD-200F
Julabo CORIO CD-200F Call for lead time Refrigerated / Heating Circulators of the new CORIO series distinguish themselves with a great price-to-performance ratio. They are ideal for all standard tasks and routine work in laboratories and industry. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over (internal and external circulation) External pump connections (M16x1) USB connection Space-saving cooling coil design yields more usable space in the bath tank Bath lid and drain tap included Removable ventilation grid Refrigeration unit without side vents Class III (FL) according to DIN 12876-1 Specifications Order No. 9012701 Model series CORIO Category Refrigerated - Heating Circulators Working temperature range (°C) -20 ... +150 Temperature control PID Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Cooling capacity (Medium Ethanol) °C 20 0 -20kW 0.22 0.17 0.06 Pump capacity flow rate (l/min) 15 Pump capacity flow pressure (psi) 5.08 Bath opening / bath depth (W x L / D inch) 5.1 x 5.9 / 5.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 3 ... 4 Refrigerant stage 1 R134a Filling volume refrigerant stage 1 (g) 70 Global Warming Potential for 1430 Carbon dioxide equivalent stage 1 (t) 0.1 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 9.1 x 15.4 x 25,6 Weight (LBS) 57.4 Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Bath tank Stainless steel Bath cover integrated Cooling of compressor Air Product Data Sheet Manual
$5,999.00
Cascade CVO-5 DOUBLE UP Vacuum Package
Cascade CVO-5 DOUBLE UP Vacuum Package Cascade’s CVO-5 DOUBLE UP Vacuum Package is ideal for large volume production with the flexibility of small batch management. The package offers incredible temperature stability for vacuum drying and purging of pharmaceuticals, botanicals, slurries, or any temperature sensitive material. Typically ships in 3-5 weeks 2x Cascade Sciences CVO-5 Vacuum Ovens 1x Heavy-Duty Industrial Mobile Cart 10x Adjustable, Removable Shelves 2x Adjustable Side Shelves 2x MAXEVAP Connection Kits 1x Agilent IDP15 Oil-Free Vacuum Pump, 9cfm Model CVO-5 VOLUME:4.5 Cubic Ft. (127 Cubic Liters) SHELVING:Includes 5 removable, adjustable (recommend 8 MAX)Surface Area: 18″W x 24″DWeight Capacity: 50 lbs (22.7Kg)Aluminum OVEN INTERIOR:18”W x 24”D x 18”H457mm x 609mm x 457mm OVEN EXTERIOR:33.3” W x 38.6” D x 31.8”H846mm x 980mm x 808mm WEIGHT:360 lbs / 163.3 Kg TEMPERATURE RANGE:Operating Range: Ambient +14.4°C to 150°C / +26°F to 302°F TEMPERATURE UNIFORMITY:@ 105°F +/- 2.0°F@ 200°F +/- 3.6°F@ 300°F +/- 5.5°F @ 40°C +/- 1.0°C@ 90°C +/- 2.0°C@ 150°C +/- 3.0°C TEMPERATURE STABILITY:@ 105°F +/- 0.2°F@ 200°F +/- 0.4°F@ 300°F +/- 0.2°F @ 40°C +/- 0.1°C@ 90°C +/- 0.2°C@ 150°C +/- 0.1°C HEAT UP FROM AMBIENT TO STABILIZATION TIME:To 105°F (40°C) 60 minutesTo 200°F (90°C) 126 minutesTo 300°F (150°C) 180 minutes (170 minutes for 220V version) COOL DOWN TIME:From 105°F (40°C) 345 minutesFrom 200°F (90°C) 285 minutesTo 300°F (150°C) 335 minutes (460 minutes for 220V version) *Temperature performance specifications are preformed in empty ovens. Performance can vary in ovens containing product, ambient lab conditions. VACUUM VALVE:¼ Turn Lever VENT VALVE:¼ Turn Lever INTERIOR LIGHTING:LED Strips (Rated to 150°C) GLASS WINDOW:Tempered NGI-US to ANSI Z97.1.2007 VACUUM GAUGE:Digital, selectable to read in inches mercury (Hg) or torr, barr CONTROLLER:Touch ScreenAccurate Within 1°FIndependent Overtemp FailsafeEasy updates with USB port PORTS (REAR):Vacuum = 3/8th BarbVent = ¼” BarbAuxiliary KF-25 Port INERT GAS INTRODUCTION:¼” Vent Barb15 psi max inlet pressure POWER:110V – 120V / 1ph / 14A 50/60HzCord IncludedNEMA 5-15 Power Outlet 1105 BTU/hrRating at max power 220V – 240V / 1ph / 7A 50/60Hz AvailableCord IncludedNEMA 6-15R Power Outlet 1228 BTU/hrRating at max power INCLUDED ACCESSORIES:5 Shelves20 Clips4 Leveling FeetPower Cord DOOR GASKET:18” x 18” Cured SiliconeTemp Silicone rated to 446°F(230°C) SHIPPING DIMENSIONS:41”L x 41”W x 45”HClass 85Shipping Weight: 449 lbs / 204 Kg User Manual CVO-5 DOUBLEUP Package with MAXTRAP Spec Sheet
$29,859.50
Cascade CVO-2 Vacuum Oven
Cascade CVO-2 Vacuum Oven (Oven Only) This item carries up to a 1-2 week lead time. Model CVO-2 offers incredible temperature stability for vacuum drying and purging of pharmaceuticals, botanicals, slurries, or any temperature sensitive material. This vacuum oven liberates solvents, water, and other unwanted compounds in small batch, R&D and lab environments. NRTL Certified. CVO-2 Vacuum Oven Features NRTL Certified by TUV 5 shelves (11.5″W x 19″D) in a flexible configuration. Shelves are stackable and removable Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven Solvent resistant BUNA door gasket Bright LED lights in window for visibility of sensitive material Digital vacuum gauge reads in inches of mercury Simple, set-point control Smooth, quarter-turn vacuum and vent valves Rear KF-25 port allows for rapid MAXEVAP purging or running feedthroughs inside oven for monitoring 120V (220V available) Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007 156CFR/201 11 SGCC -2577 ½ UA Adjustable leveling feet ensure oven sits solid and level in the workspace CVO-2 Connections 3/8″ Barb for Vacuum Pump 1/4″ Barb for Venting (N2 Connection OK) KF-25 Port for feedthroughs or MAXEVAP Connection Kit Need A Complete CVO-2 Vacuum Package? Cascade has taken the guess work out of pairing the right vacuum oven with the proper pump. We offer two complete CVO-2 vacuum oven packages with everything you need for vacuum drying. Both packages feature clean, quiet, Agilent oil-free scroll pumps. The CVO-2 STANDARD Package is an ideal package for vacuum drying or purging requiring a steady, gentle, non-turbulent purge. The CVO-2 PRO Package is ideal for higher thru-put, faster purge times pulling deeper vacuum. CVO-2 Comes In Low & High Temp Models Low & High Temp Specifications CVO-2 (Low Temp) Temperature Processing Range -3ºC to 121°C (26°F to 250°F) Temperature Uniformity +/- 1ºC at 40.5°C (+/- 1.5°F at 105°F) Temperature Stability +/- 0.5°C at 40.5°C (+/- 0.4 at 105°F) CVO-2-HT (High Temp) Temperature Processing Range Up to 220°C (428°F) Temperature Uniformity +/- 6.5% of setpoint The Cascade Difference Vacuum ovens have been around for decades. Basic vacuum ovens are mass-produced and sold by many large scale laboratory equipment distributors. But there are key differences between Cascade and other inexpensive, often imported vacuum ovens. Exceptional Temperature Control & Stability The Cascade CVO-2 uses a unique control logic not found in most lab grade vacuum ovens. The temperature probe is INSIDE the oven, which minimizes temperature overshoot and delivers best-in-class temperature stability and uniformity particularly in the low temperature ranges. Accurate, stable temps throughout the CVO-2 eliminate hot and cold spots, making accurate use of every inch of shelf space. Independent Over-temp Failsafe Protection The Cascade Sciences CVO-2 is equipped with a heating cutoff system that will automatically stop power to the heaters when the oven shelf temps exceed 200°C or 392°F. This protection system will provide peace of mind for overnight processing or unattended vacuum bake outs. NRTL Certification #U8 170464972 077. No Extra cost. The CVO-2 Vacuum Oven comes certified by the Nationally Recognized Test Lab, TUV. This certification is a requirement by many municipalities. CAN/CSA-C22.2 No. 61010-1:2012 +UPD No. 1:2015-07 + UPD No. 2:2016-04 CAN/CSA-C22.2 No. 61010-2-010:2015 UL 61010-1:2012/R:2016-04 UL 61010-2-010:2015 EN 61010-1:2010 EN 61010-2-010:2014 Rigorous Quality Assurance in an ISO Certified, USA Manufacturing Facility Cascade Sciences manufactures our ovens in Oregon, USA. We are proud of our ISO 9001 Certification/Accreditation. Each oven completes a series of quality assurance procedures before shipment: Chambers are vacuum tested after welding for vacuum integrity Electrical & mechanical safety is thoroughly tested in compliance with TUV requirements Functional testing verifies user settable items consistent with most lab protocols/usage models Temperature verification includes calibration & temp chamber uniformity following ASTM standards Units are cleaned and packed in ISTA tested, certified packaging materials Digital Vacuum Gauge The digital vacuum gauge installed on the CVO-2 is factory default set to read in inches of mercury (“Hg) with a scale of 0 – 29.9”Hg. Change the unit of vacuum measurement to read in a wide variety of units from mmHg, bar psi, kPa, cm2, mmH20. Zero out the vacuum gauge to calibrate for just above sea level adjustments. Equipped for Inert Gas Backfill. Built-In Safety Relief Introduce inert gasses such as nitrogen, argon, helium, etc. as part of your process via the 1/4″ rear vent barb. The maximum backfill pressure is 15PSI. In an overpressure situation, a simple, built-in safety relief allows gasses to escape via a spring loaded tempered window. Flexible Pumping / Feedthru Connection Ports The CVO-2 ovens offer two different vacuum oven connection points. The standard connection is a 3/8″ dia barb located at the rear of the oven. It is connected to the vacuum valve level on the front control panel. For even faster evaporation, purging or drying consider upgrading to the MAXEVAP connection kit. The MAXEVAP connection kit secures to the oven’s rear 1″ dia KF-25 port located on the back center of the chamber. The MAXEVAP connection never reduces flow by continuing with 1” diameter vacuum rated clear lines, a 1” dia KF-25 side mounted vacuum valve and KF-25 fittings and hardware. This KF-25 port can also be used to run temperature feedthroughs, or monitoring sensors inside the vacuum chamber during processing. Stackable Shelf Design For Maximum Temperature Conduction Under vacuum, there is no air inside a vacuum oven. Temperatures are achieved by a process of conduction and radiation to move temperatures into the product inside the oven. Cascade’s stackable shelf design makes the most of this opportunity by making the chamber longer and narrower, rather than square and supplies stackable shelves in multiple height configurations to allow for the fastest, most uniform transfer of heat. Ergonomically Designed, Easy Quarter-Turn Valves For anyone that has struggled with consistently turning the small, round, low-quality vacuum/vent valves, relief is in sight. You will love our large, quarter-turn vacuum/vent valves. Your wrists will thank you! ANSI Rated Tempered Glass + USA Made Steel Cascade ovens are made in Oregon, USA with high quality materials. Our glass is NGI-USA Tempered and certified to ANSI Z97.1.2007 16CFR / 201 11. Our door handles are rugged brushed steel, not plastic. Our vacuum vessels are constructed with American made steel. We’ve tried lower cost, imported steel, but over time, vacuum chambers made of lesser quality/lower tolerance material cannot withstand the flex and pressure changes of vacuum pumping/venting/purging. This can deteriorate vacuum integrity and the oven will lose its ability to hold vacuum. Door Gasket Options – Ideal For Your Process Cascade’s vacuum ovens come standard with a solvent resistant BUNA door gasket. For higher temp applications, we offer a cured Silicone gasket as well. Ask us about the variety of door gaskets we can supply based on your application: Silicone, BUNA, Viton, Fluorosilicone. Gaskets will eventually wear out. It’s ideal to keep a few spares on hand. Model CVO-2 Vacuum Oven Specifications: Capacity Volume 1.67 Cu Ft (47.2 L) Interior 12″W x 20″D x 12″H (305mm x 508mm x 305mm) Exterior 18.8″W x 24.5″D x 24.5″H (478mm x 622mm x 622mm) Product Weight 148 lbs (67.1 kgs) Temperature Temperature Range -3ºC to 121°C (26°F to 250°F) Temperature Uniformity +/- 1ºC at 40.5°C (+/- 1.5°F at 105°F) Temperature Stability +/- 0.5 at 40.5°C (+/- 0.4°F at 105°F) Vacuum Vacuum Valve 1/4 Turn Lever Vent Valve 1/4 Turn Lever Vacuum Gauge Digital. 0 to 29.9″Hg Temperature Controller Digital Set Point Accurate Within .5ºC (1°F) Independent Overtemp Failsafe Ports (Rear) Vacuum 3/8″ Barb Vent 1/4″ Barb Auxiliary KF-25 Port Inert Gas Introduction Use 1/4″ Vent Barb 15 psi max inlet pressure Power Options 110V – 120V / 1ph / 6A 50/60Hz (Cord Included) NEMA 5 – 15 Power Outlet Full Power 2456 BTU/hr *(220V Optional) Shelving Includes 5 shelves in a flexible configurationShelves are stackable and removable1″ High = 1 each2″ High = 2 each3″ high = 2 each Surface Area 11.5″W x 19″D Weight Capacity 50 lbs (22.7 kgs) Door Interior Lighting LED Strips (Rated to 150°C) Glass Window Tempered NGI-US to ANSI Z97.1.2007 Gasket Type 12″ x 12″ Solvent Resistant BUNA Standard Gasket Rated to 105°C (221°F) Gasket Options: High Temp Silicone Option rated to 30°C (446°F)Viton Option rated to 205°C (401°F) Shipping & Weights Unit Weight 179 lb (81.2 kg) Shipping Weight 218 lbs (99 kg) Shipping Dimensions 33″L x 33″W x 47″D (Class 85) Product Certifications: NRTL TUV #U8 170464972 077CAN/CSA-C22.2 No. 61010-1:2012+ UPD No. 1:2015-07 + UPD No. 2:2016-04CAN/CSA-C22.2 No. 61010-2-010:2015UL 61010-1:2012/R:2016-04UL 61010-2-010:2015EN 61010-1:2010EN 61010-2-010:2014 Warranty: 1 Year (Gaskets not included) *Temperature performance specifications are preformed in empty ovens. Performance can vary in ovens containing product. NTRL Certification PDF Manual Vacuum Pressure Chart Vacuum Gauge Manual Calibration
$6,889.00
Raschig Ring 1LB
Raschig Ring 1LB Raschig rings are pieces of tube used in large numbers as a packed bed within columns for distillation. These glass rings provide a large surface area within the volume of the column for interaction between liquid and gas vapors. Our rings are made from borosilicate glass and are food grade quality. 8mm X 8mm *BVV recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. *BVV is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal.
$120.00
PolyScience Floating Ball Cover; 3/4" (19 mm) diameter
PolyScience Floating Ball Cover; 3/4" (19 mm) diameter Description Covers top of any open tank. Reduces fumes, splashing hazard and heat loss by 75% and evaporation by 87%. Usable to 95°C. Package of 400 Quantity: 1 pkg Part Number: 060301 For use with: Circulating Baths Stainless Steel Open Bath Systems Polycarbonate Open Bath Systems General Purpose Water Baths
$133.00
PolyScience External Pressure Reducer (for Chillers with P or T pump)
PolyScience External Pressure Reducer (for Chillers with P or T pump) Description: For use with 6000 Series Chillers with Positive Displacement or Turbine Pumps. Reduces chiller output to adjustable range of 10-45 psi (0.69-3.10 bar) Quantity: 1 each Part Number: 060302 For use with: Chillers & Coolers 6000 Series Chiller
$926.00
Welch Explosion Proof CRVpro8 Direct Drive Rotary Vane Vacuum Pump
Welch Explosion Proof CRVpro8 Direct Drive Rotary Vane Vacuum Pump ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits: Runs 10°C cooler than comparable pumps. Slows corrosion. Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals. Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection. Suitable applications include freeze drying, degassing, vacuum ovens and concentrators. 3086E-01 comes with an explosion proof motor. Conduit wiring installation required. No cord, plug, or switch provided. Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr Specifications Application CRVpro8 Free Air Displacement @ 60 Hz, cfm (L/min) 5.6 (158) Free Air Displacement @ 50 Hz, m³/hr (L/min) 8 (133) Ultimate Pressure, torr (mbar) 5x10⁻⁴ (4x10⁻⁴) Noise Level, dBA 50 Motor Speed, RPM, @60Hz, @50Hz 1740 (1450) Motor Power, HP (kW) 0.4 (0.5) Oil Capacity, mL 1000 Connection Flanges NW 16 Inlet Hose Connection* 5/8" to 3/4" Weight, lbs (kg) 49.6 (22.5) Dimensions, LxWxH, in (mm) 18.2x6.1x9.1 (463x157x230)
$5,270.00
5L Solvent Pro Rotary Evaporator Bump Trap
5L Solvent Pro Rotary Evaporator Bump Trap Replacement Bump Trap for 5L Solvent Pro Rotary Evaporator
$400.00
10L Solvent Pro Rotary Evaporator Main Condenser
10L Solvent Pro Rotary Evaporator Main Condenser 10L Solvent Pro Rotary Evaporator Main Condenser *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.
$350.00
Welch WOB-L Pump 2522
Welch WOB-L Pump 2522 Product Details Economical Oil Free Adjustable Vacuum / Pressure Reliable WOB-L Piston pumps are perfect for many common laboratory vacuum applications. Features: Vacuum and Pressure - to 100 Torr (26"Hg). Includes Vacuum and Pressure Regulators and Gauges - simple to adjust and monitor vacuum level and delivery pressure. Inlet Water Trap - float ball rises to seal off pump from accidental ingestion of water. Muffler quiets pump and filters discharge air. For use with dry or aqueous vapor applications only. Specifications Model Number 2522 Application Filtration (1 to 2 funnels), Aspiration, Desiccation, SPE, Replace water aspirator, Vacuum Drying Type Laboratory Vacuum Pump Free Air Displacement cfm (l/min.) @60Hz 0.76(22) Free Air Displacement m3/hr (l/min.) @50Hz 1.1(18) Ultimate Pressure 100(133) Maximum Vacuum 26 Max Pressure PSIG (pascal) 100(106) Motor Horsepower (watts) 1/8(93) Adjustable Vac. / Gas Ballast Yes Tubing Needed 3/16(5) Intake Thread NPT 1/4 Overall Dimensions LxWxH in. (cm) 8.1x8.8x10 (20.6x22.4x25.4) Ship Weight 17(7.7) Shipping Carton Dimensions LxWxH in. (cm) 15.3x12.3x12.7 (39x31x32) Intake Catch Jar Yes Exhaust Catch Jar Yes Adjustable Vacuum Knob Adjustable Pressure Yes Vacuum Gauge Dial Pressure Gauge Dial
$655.00
Huber Minichiller 600 OLÉ
Huber Minichiller 600 OLÉ (Please Note: There is a 2 -3 weeks lead time) Description: The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are available as both air and water cooled models and use natural refrigerants. The new OLÉ controller combines state-of-the-art technology with simple operation. OLÉ models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge) Environmentally-friendly, economic cooling solution High efficiency Precise temperature control Simple operation with menu navigation Robust stainless construction Reliable continuously operation with warning functions Easy to fill and empty Illuminated filling level indicator Bright, large OLED display USB and RS232 interfaces Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range -20...40 °C Temperature stability ±0.5 °C Temperature Display OLED Display Display resolution 0.1 °C Alarm message optical, acoustical Controller OLÉ Safety class I / NFL Protection class IP20 Dimensions (W x D x H) 280 x 490 x 424 mm | 11.02 x 19.29 x 16.69 inches Weight 36 kg | 79.38 pounds Heating / Cooling Capacity Cooling capacity 15 0 -10 -20 ° C0,6 0,5 0,35 15 kW Cooling machine air-cooled Refrigerant R290 (A3, H220) (0,085 kg) Circulation Pump Pressure pump max. 24 lpm ; 0.7 bar | 6.34 gpm ; 10.15 psi Suction pump max. 18 lpm ; 0.4 bar | 4.76 gpm ; 5.8 psi Pump connection M16x1 AG male Connections Digital interface USB, RS232 Operating Data Old sku 3006.0097.98 Noise Level 56 dB(A) Filling Volume min 2.8 Liters | 0.74 gal Volume of expansion 2.2 Liters | 0.58 gal Power supply 110-120V 1~ 60Hz Current max. 8,5 A
$6,990.00 - $7,490.00
Welch High Capacity Diaphragm Pumps 2062
Welch High Capacity Diaphragm Pumps 2062 ***Note: This item has a possible 1-2 week lead time depending on stock availability*** High Capacity dry diaphragm vacuum pump. PTFE contact surfaces, deep vacuum at with high flow. PTFE Pump, 8 heads. 115V 60HZ 1.5 TORR 119 LPM Specifications Includes 1/4" OD hose barb Common accessory, not included Vacuum Controller Pumping Speed 119 Lit/min. (4.2 CFM) Max. Vacuum 1.5 Torr (2 mbar) 29.9" Hg Tubing Needed 1/4" ID Inlet Connection UNIBARB Exhaust 1/4" OD Dimensions LxWxH inches 21x11x12 Weight 72 LBS Wiring 115V, 60 hz
$5,261.00
Welch WOB-L Pump 2581
Welch-L Pump 2581 ***Note: This item has a possible 1-2 week lead time depending on stock availability.*** Product Details Economical Oil Free Adjustable Vacuum Reliable WOB-L Piston pump is perfect for many common laboratory vacuum applications. Features: Vacuum to 5 Torr (29.8"Hg). Includes Vacuum Regulator and Gauge - simple to adjust and monitor vacuum level. Inlet Water Trap - float ball rises to seal off pump from accidental ingestion of water. Muffler quiets pump and filters discharge air. For use with dry or aqueous vapor applications only. Specifications Model 2581 Free Air Displacement @ 60 Hz, cfm (L/min) 3.5 (100) Ultimate Pressure, torr 5 Motor Power, HP (kW) at 60 Hz 1/3 (0.25) Inlet (Exhaust) Connection Thread NPT 3/8 Tubing Needed, I.D. in. (mm) 1/4 (7) Weight, lbs (kg) 24.5 (11.1) Dimensions, LxWxH, in (mm) 17x7.5x12 (430x420x190) 115V Order Number 2581B-50 / 2581B-24
$2,279.00 - $2,612.00
Agilent IDP-7 5.4 cfm Oil-Free Compact Dry Scroll Pump
Agilent IDP-7 5.4 cfm Oil-Free Compact Dry Scroll Pump Overview The new Agilent IDP-7 dry scroll pump is a compact, high performance, oil-free vacuum pump, delivering large pumping speed capacity and simple maintenance. Agilent IDP dry scroll pumps are oil-free, compact, quiet, high performance vacuum pumps. IDP pumps use a single-sided scroll design that allows for a straightforward 15 minute maintenance procedure with simple tools. Large pumping speeds and compact sizes are ideal for many applications in the research, analytical instrument, and laboratory markets. IDP pumps are hermetic, with the motor and all bearings completely isolated from the vacuum path. This design extends the bearing life and provides clean, dry vacuum to the application. An inlet isolation valve is available as an integral option that adds no additional height to the pump.
$6,074.00 - $6,429.00
J-Kem Gemini-2 Dual Temperature Controller
J-Kem Gemini-2 Dual Temperature Controller Gemini-2 Dual Temperature Controller displays two temperature controllers in a single cabinet to regulate two independent reactions. Each channel is 1200 Watts MAX (1800 Watts total), 15 Amps @ 120VAC, The Gemini is one of J-KEM’s most versatile controllers featuring high power outlets and a 100 hour digital timer (on channel 1) to turn heating OFF (or ON) at a user entered time. Features Included: Over-temperature protection circuits with audible alarms, dual temperature displays, selectable operating modes, double fused, and 100% solid state design. The USB port on the back panel of the controller is an interface to J-KEM’s KEM-Net software. Safety features include: 100% solid state, double fused, audible error alarm, and over temperature circuitry that disconnects power if an over temperature condition occurs. Specifications: Dimensions: 3.5" H x 7.75" W x 8.75" D Power: 15 Amps @ 120VAC, 1200 Watts MAX/Channel, 1800 Watts (Total) Weight: 7 lbs Complete System Includes: One controller Two Teflon thermocouples (12″ long, 1/8″ diameter) Two connecting cords Two 14/20 joint adapters
$1,569.00 - $1,921.00
HUBER CC-902 208V Refrigerator Bath Circulator
HUBER CC-902 Refrigerator Bath Circulator (Please Note: There is up to 3 weeks Shipping lead time) The Refrigeration Bath Circulators are created to control the temperature of externally connected. Applications are: photometers, refractometers, viscometers, double-jacketed reaction vessels and autoclaves. the units can be used, for determining the freezing point, for deep temperature calibration, for petroleum tests, for temperature control of measuring devices and experimental setups as well as for materials testing and quality control. Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products General information & Temperature Controller Temperature range -90...200 °C Temperature stability ±0.02 °C ±0.02 °C Controller Pilot ONE (E-grade "Basic") Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 550 x 600 x 911 mm | 21.65 x 23.62 x 35.87 inches Weight 139 kg | 306.5 pounds Heating / Cooling Capacity Heating capacity 1,2 kW Cooling capacity 100 20 0 -20 -40 -60 -80 °C1,2 1,2 1,2 1,1 0,9 0,6 0,2 kW Cooling machine air-cooled Refrigerant 1. stage R452A (A1, H280) (0,78 kg) Refrigerant 2. stage R508B (A1, H280) (0,46 kg) Circulation Pump Pressure pump max. 25 lpm ; 0.7 bar | 6.6 gpm ; 10.15 psi Suction pump max. 18.5 lpm ; 0.4 bar | 4.89 gpm ; 5.8 psi Pump Connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Permissible ambient temp. 5...40 °C Bath opening W x D / BD 120 x 110 / 150 mm | 4.72 x 4.33 / 5.91 inches Bath volume 5 Liters | 1.32 gal Power supply 208V 2~ 60Hz Current max. 18 A Fusing 2x20 A
$37,500.00 - $37,900.00
So-Low -85°C Ultra-Low Upright Freezer - 18 Cubic Ft.
So-Low -85°C Ultra-Low Upright Freezer - 18 Cubic Ft. Please note: This Product may carry up to an 8 week lead time! So-Low Ultra-Low Upright Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low U85-18 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Product Specifications Temperature Control Digital control with two temperatures displays. one display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Dimensions: Exterior: 40"" x 36" x 79.5" Interior: 23" x 26" x 51.25" Capacity 18 Cubic Ft. / 505 Liters Temperature Range -40°C to -85°C / -40°F to -121°F Shelving 4 Adjustable Shelves (5 Compartments) Inventory Rack Capacity 20 Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval Specification Data Sheet Diagram Data Sheet
$9,995.00 - $11,544.50
So-Low -80°C Ultra-Low Chest Freezer - 21 Cubic Ft.
So-Low -80°C Ultra-Low Chest Freezer - 21 Cubic Ft. Please note: This Product may carry up to an 8 week lead time! So-Low Ultra-Low Chest Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low C80-21 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch Product Specifications Temperature Control Digital Control with two temperature displays. One display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Dimensions: Exterior: 91" x 36" x 49" Interior: 81" x 21.5" x 21" Capacity 21 Cubic ft. / 594 Liters Temperature Range -40°C to -80°C / -40°F to -112°F Shelving N/A Inventory Rack Capacity 36 Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval Specification Data Sheet Diagram Data Sheet
$12,995.00 - $14,844.50
So-Low -85°C Ultra-Low Chest Freezer - 9 Cubic Ft.
So-Low -85°C Ultra-Low Chest Freezer - 9 Cubic Ft. Please note: This Product may carry up to an 8 week lead time! So-Low Ultra-Low Chest Freezers are second to none in low temp applications to suit any laboratory or application needs. These Ultra-Low Temp freezers feature digital temperature control with 2 temperature displays. One shows the set temperature and the other shows the actual temperature in the freezer. The So-Low C85-9 features a battery operated alarm system that will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Product Specifications Temperature Control Digital Control with two temperature displays. One display shows the set temperature, the other shows the actual temperature in the freezer. Alarm System Battery operated alarm system will emit an audible and visual signal when there is a mechanical or electrical failure. The alarm has an over and under temperature setting, alarm silencing switch, and battery test switch. Dimensions: Exterior: 57.5" x 29" x 46.5" Interior: 46" x 16" x 20" Capacity 9 Cubic Ft. / 255 Liters Temperature Range -40°C to -85°C / -40°F to -121°F Remote Alarm Relay A relay for a remote alarm hook-up is also provided. Refrigeration System So-Low cascade type. Two hermetic compressors. CFC & HCFC free refrigerants. Construction Chamber is 14-ga. zinc coated galvanized steel. Exterior is 16-ga. steel. Powder coated cool gray finish. Voltages Available 115/60/1 - 220/50/1 Technical Support Supplied by Nation-Wide-Network of service companies. ETL Electrical Approval Specification Data Sheet Diagram Data Sheet
$7,995.00 - $9,344.50
5L Solvent Pro Series Glass Axis
5L Solvent Pro Series Glass Axis. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$45.00
1.5 Gallon Tall Stainless Steel SIDEMOUNT - POT ONLY
1.5 Gallon Tall Stainless Steel SIDEMOUNT - POT ONLY ***Note: 'with Hardware' Option only includes the side-mount manifold with gauge pre-installed. (Does Not Include Lid or Gasket) This is a replacement part for the following Vacuum Chambers: Glass Vac 1.5 Gallon Tall Stainless Steel Vacuum Chamber Dimensions: 8-5/8"" Tall x 7-1/8"" Diameter Hole Size: 21/64 Material: 304 - 2B Stainless Steel
$58.00 - $70.00
50L Auxiliary Condenser
Auxiliary condenser for 50L Best Value Rotary Evaporator. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$370.00
BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid
BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid This End Cap comes with (4) Compression connections and (2) 1.5" and (1) Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid. They allow the user to adapt and connect a tube stub connection to the (1) 1/4", (2) 3/8", and (1) 1/2" port on a Tri-Clamp lid and the Tri-Clamp Connections. These 7 connections are welded on a 10" Hemispherical Tri-Clamp End Cap. Specifications Material: 304 Stainless Steel Connection Types: (2) 2" and (1) 1.5" Tri-Clamp with 3" Tube Extension Below Lid on Center Tri-Clamp Port 10" Tri-Clamp (1)1/4", (2) 3/8" and (1)1/2" Female Compression Connections Standard: 3A
$355.00
BVV Replacement Centrifuge EX Motors
BVV replacement centrifuge EX motors for BVV 45L and 475L centrifuges.
$550.00 - $1,450.00
Swivel Bosshead
This swivel boss head is made out of die-cast alloy is nickel plated and will fit rod diameters up to 16mm. The boss head can be adjusted and locked to any angle (360°). It is also designed to carry heavy loads and prevent torque damage. Note:Clamps and rods are NOT included.
$14.00
Throttle Valves for Pneumatic Presses
Throttle Valves for Pneumatic Presses Throttle Valve used to control the speed of your pneumatic press. Replace the fitting on the output side of your regulator. Thread Size: 1/2" NPT, Quick Connect Air Hose Size: 12mm
$20.00
Gas Plug L-5 Bentonite Clay
Purify and prepare your oil with Bentonite Clay ‘L-5’ Gas Plug L-5 Bentonite Clay SDS
$78.00$45.00
Gas Plug U42 Activated Bleaching Clay
Purify and prepare your oil with U42 Activated Bleaching Clay. Gas Plug U42 Activated Bleaching Clay SDS
$100.00
HUBER Unistat 815 Dynamic Temperature Control / Circulation Thermostat
HUBER Unistat 815 Dynamic Temperature Control (Please Note: There is a 2 - 3 weeks lead time) Unistat Circulators are an ideal solution for fast and precise thermal control of externally connected applications. These systems offer rapid temperature change and a wide temperature range without having to change fluid. The new Pilot ONE controller features a navigation system with easily remembered icons and menus which are sorted by color to make routine work simpler. An amazing software guides you through your set up ensuring all the necessary settings are correct. Unistat 815 208V Data sheet Unistat 815 460V Data sheet 3 Year Warranty Extension General Information & Temperature Controller Unistat 815208V Unistat 815460V Temperature range -85...250 °C -85...250 Temperature stability ±0.01 °C ±0.01 Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Alarm message optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL Protection class IP20 IP20 Dimensions (W x D x H) 18.11 x 23.78 x 65.55 inches 18.11 x 23.78 x 57.68 inches Weight 331 kg | 729.86 pounds 229 kg | 504.94 pounds Heating / Cooling Capacity Heating capacity 2 kW 2,6 kW Cooling machine air-cooled air-cooled Refrigerant 1. stage R452A (A1, H280) (1,8 kg) R452A (A1, H280) (1,8 kg) Refrigerant 2. stage R23 (A1, H280) (0,39 kg) R23 (A1, H280) (0,39 kg) Circulation Pump Pressure pump max. 40 lpm ; 0.9 bar | 10.57 gpm ; 13.05 psi 40 lpm ; 0.9 bar | 10.57 gpm ; 13.05 psi Pump connection M30x1,5 AG male M30x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Analogue input via optional Com.G@te via optional Com.G@te Analogue output via optional Com.G@te via optional Com.G@te Operating Data Old Sku 1014.0054.01 1014.0055.01 Permissible ambient temp. 5 to 40 °C 5 to 40 °C Noise Level 64 dB(A) 64 dB(A) Filling volume min. 3.8 Liters / 1 gal 3.8 Liters / 1 gal Volume of expansion 3.3 Liters / 0.87 gal 3.3 Liters / 0.87 gal Power supply 208V 3~ 60Hz 460V 3~ 60Hz Current max 21,5 A 11 A
$55,550.00 - $63,250.00
HUBER KISS 202C Heating Circulation
HUBER KISS 202C Heating Circulation (Please Note: There is a 6 weeks lead time) Heating circulation thermostats are specially designed for temperature control of externally attached applications with a small volume. The units are fitted with bath tanks made of stainless steel or polycarbonate. The thermostats have M16x1 pump connections at the rear side as well as a stainless steel bath cover with a filling opening. All models are fitted with an overtemperature and low level protection system according to safety class III/FL (DIN 12876) for use with flammable fluids. A powerful circulation pump ensures optimal heat transfer to external attached applications. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge). KISS temperature controller Bright, large OLED display Simple operation with menu navigation Simultaneous display of setpoint, Tmin, Tmax and actual temperature Status displays for pump, cooling and heating Overtemperature and low level protection Safety class III/FL (DIN 12876) USB and RS232 interfaces Autostart function for power failure 3 colour versions available: grey (standard), blue, red Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range (-30) 45...200 °C Temperature stability ±0,05 °C Temperature display OLED Display Alarm message optical, acoustical Controller KISS Safety class III / FL Protection class IP20 Dimensions (W x D x H) 178 x 260 x 355 mm | 7.01 x 10.24 x 13.98 inches Weight 8 kg | 17.64 pounds Heating / Cooling Capacity Heating capacity 1 - 1,5 kW Circulation Pump Pressure pump max. 14 lpm ; 0.25 bar | 3.7 gpm ; 3.62 psi Suction pump max. 10.5 lpm ; 0.17 bar | 2.77 gpm ; 2.47 psi Pump connection M16x1 AG male Connections Digital interface USB, RS232 Operating Data Old Sku 2039.0010.98 Permissible ambient temp. 5 to 40 °C Bath opening WxD/BD Ø = 25 / 150 mm | Ø = 0.98 / 5.91 inches Bath volume 2 Liters | 0.53 gal Power supply 100-115V 1~ 50/60Hz Current max 15 A Fusing 15 A
$3,330.00 - $3,830.00
Compressor Head BARE for BVV Recovery Pump/ CMEP Retrofit
This is a replacement compressor head for the BVV2CYL, BVV4CYL, and BVVCMEP-RETRO. It is a full stainless steel head and has all the proper holes drilled to fit on our recovery pumps.
$35.00
You have seen 1536 out of 1903 products