3 products

  • Alumilite Dye

    Alumilite Dye

    Use Alumilite’s Dyes to color your casting resin. Can be used in the water clear resin to make a translucent colored casting. The dyes are added to the “A” side by weight up to 5%. Use the Flesh tones according to your preference of shade (flesh tones are typically used in Alumilite White to achieve the best results). NOTE: 1 oz. bottle dispensing tip must be cut to dispense dye. Tip may also be removed completely.   Disclaimer: Bottle style/label may vary from what is pictured due to mfr. labeling update. Otherwise it is still the same product.  

  • Alumilite White 2 gal.

    Alumilite White 2 gal.

    Alumilite White (also known and sold as Amazing Casting Resin) is an easy to use white urethane resin that creates a durable casting with perfect cosmetics and intricate details. Transitions from clear to opaque white when curing Easily dyed or painted   Technical Data Sheet Safet Data Sheet TECHNICAL SPECIFICATIONS Product: Alumilite White Color: White Mix Ratio: 1:1 by weight or volume Pot Life: 2 minutes Demold Time (100 gram mass): 5-10 minutes Mixed Viscosity (cps): 90 Specific Gravity: 1.05 Shore Hardness (ASTM D2240): 72 D Shrinkage (in./in.): .006 Tensile Strength (ASTM D638, psi): 4500 Elongation (in./in.): 10% Temperature Resistance: 185º F


  • Sale -16% Amazing Clear Cast

    Amazing Clear Cast

    Please note: Signature required by legal adult   Clear Casting and Coating System Alumilite's Amazing Clear Cast is a clear casting and coating system that cures to a rigid, durable, clear plastic. Use Amazing Clear Cast for coating or finishing applications such as bar tops, floors, taxidermy scenery, lenses, and all sorts of other clear casting or coating applications. Amazing Clear Cast is an easy to use, 1:1 mix ratio system that cures overnight which allows time for air bubbles to evacuate prior to curing. Amazing Clear Cast can be colored with Alumilite dyes, alcoholic inks, or other non-water base colorants. Complies with FDA CFR 177.2600 Continue to utilize a 1:1 Ratio of the Clear Cast even if the item may appear different as Side A & Side B are determined by weight.Temperature changes cause volumes to look different between Side A & Side B however this does not change the weight of the item.The Resin may cure faster when utilizing this product as heat will be produced.To slow down curing time refrigerate before use.   Shelf Life ACC has a shelf life of 1 year. Once ACC is opened, this time can be shorter based on moisture contamination from humidity. Amazing Clear Cast B side will naturally yellow over time and when exposure to air. While this can cause a yellow hue to cured coatings, it does not have an effect on the ultimate cure of the product. *Alumilite warns that this epoxy can begin to yellow as soon as 30-60 days after pouring. So, this epoxy is recommended for use over colorful backgrounds where slight yellowing won’t be noticed. Pouring over a stark white background may show the yellowing of the epoxy more.*   Specifications: Product Amazing Clear Cast Color Clear Mix Ratio 1:1 by **VOLUME** Pot Life 30-40 mins Demold Time(100 gr Mass) 24-48 hrs Mixed Viscosity (cps.) 2600 Specific Gravity 1.08 Shore Hardness (ASTM D-2240) 80 D Shrinkage (in./in.) .003 Tensile Strength (ASTM D-638)(psi) 8,000 Elongation (in./in.) 1-3% Temp Resistance n/a    * Item cannot be returned or exchanged

    $16.00 - $110.00

A small selection of the most sold Alumilite products at BVV.