Products
-
The Press Club THE "EASY WHIP" TOOL
🛑 PSA: If you're still whipping with a drill, STOP IMMEDIATELY! 🛑 Terpenes are extremely volatile compounds that are easily broken down with the introduction of oxygen. Drill whipping pulls air into your rosin much quicker than hand whipping which causes rapid oxidization and terpene loss. At The Press Club, we're all about preserving terpenes so when it comes to whipping to homogenize your rosin, we always recommend hand whipping vs. drill whipping. Similar to baking, using your hands puts you much closer to your craft and gives you much more control compared to using a machine to do the work for you. That's why we're excited to finally introduce our patented "Easy-Whip" handle and stainless steel whip tool. Using our "Easy-Whip" handle and stainless steel whip tool gives you the ability to gently fold and homogenize your rosin without overworking it with oxygen, preserving more terpenes. The "Easy-Whip" handle is compatible with all stainless steel tools and is ergonomically designed to give you a firm hold on any tool and help fight wrist fatigue too! Our stainless steel whip tools are rust-proof and handmade from 100% German stainless steel. ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$19.95 - $59.95
-
The Press Club THE HASH BASKET
Introducing The Hash Basket – the ultimate multipurpose stainless steel tool for enhancing both your cleaning and strain testing process. Made to be compatible with all 1/2-pint and pint sized wide-mouth jars, transform any glass jar into a cleaning basket or test jar in seconds. The days of soaking your glass in questionable plastic is over! Whether you need a reliable method for cleaning bangers, carb caps, pearls, pills, dab tools and even wash tools (like spoons) or a convenient way to test wash strains, the Hash Basket has you covered. Crafted from premium, food-grade stainless steel, the perforated mesh design allows for quick draining with minimal mess. Each stainless steel basket includes an integrated wide lip to hold the basket a few inches off the bottom of the jar, keeping your pieces extra clean and test heads protected. Use the small top tab to easily remove the basket from the ISO and use the side hang tab to drain and dry your pieces quickly. If using the Hash Basket to test wash, use the convenient side hang tab to drain your test material, allowing for closer and more accurate inspections. KET FEATURES Two Size Options: Small (for 1/2-pint wide-mouth jars) and Large (for pint wide-mouth jars) Dual-Purpose Functionality: Ideal for cleaning bangers, terp pearls, and more; doubles as a test washer to assess strain washability Premium Stainless Steel Construction: Durable, rust-resistant, and easy to clean for long-lasting use Perforated Mesh Design: Ensures thorough cleaning and effective testing with minimal mess Top Tab for Easy Removal: use the small top tab to effortlessly lift the basket from inside the jar Side Hang Tab: use the side hang tab to easily drain the basket ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$24.95 - $34.95
-
The Icarus Extractor Base
DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well ventilated areas. Check with your local fire marshal for guidance when operating indoors This is a Pre-built Extractor Base for 5LB Icarus with BVV 316SS Full bore valves rated from -40F to 450F.
$1,180.00 - $1,770.00
-
The Mini Extractor 135G Upgrade Kit
The Mini Extractor 135G Upgrade Kit This upgrade kit will increase the capacity of your existing Mini Extractor to a Maximum of 135G This Upgrade Kit Includes: (2) 4" x 4" Spools (2) 4" Single Pin Tri-Clamps (2) 4" BUNA-N Gaskets (1) 1.5" x 18" Stainless Steel Material Column
$198.00 - $244.00
-
The Press Club The Press Club 3" x 5" Easy Drip Rosin Press
3" x 5" Easy Drip Rosin Press Available in two sizes (3” x 5” and 4” x 7”), each press is thoughtfully designed and handcrafted by top solventless experts in the industry. We even developed our own in-house hydraulic ram and pump. WHAT’S INCLUDED WITH EACH KIT - 3" x 5" Rosin Press Kit - 10 Ton Hydraulic Ram / Pump (Hard Case Included), Dual PID Controller, Integrated Easy Drip Tech Tilting Base, Stickers and more 4" x 7" Rosin Press Kit - 20 Ton Hydraulic Ram / Pump (Hard Case Included), Dual PID Controller, Integrated Easy Drip Tech Tilting Base, Stickers and more KEY FEATURES MADE FROM HIGH-QUALITY, INDUSTRIAL-GRADE MATERIALS (Certified American 6061 Aluminum & 304 Stainless Steel) UNDER 45LBS / PORTABLE / TOP HANDLE FOR EASY TRAVELING ULTRA COMPACT & STURDY (measures less than 12” in L x W x H) PATENTED EASY DRIP TECHNOLOGY (go from horizontal to tilted press in less than 3-secs) TOP OF THE LINE INSULATION TO PREVENT HEAT DISSIPATION FROM TOP / BOTTOM PLATES DUAL HEAT CONTROLLER W/ AUTOMATIC SAFETY SWITCH (easily control each top and bottom plate with our easy 2 button set and forget it operation) THE PRESS CLUB BRAND HYDRAULIC RAM / PUMP (HARD CASE INCLUDED) LIFETIME WARRANTY / 2-YEAR WARRANTY ON ELECTRICAL COMPONENTS HANDMADE IN NORTH AMERICA 1018 Cold Rolled Steel w/ Black Zinc Nickel Plating 6061 Aluminum Plates Press Plates
$3,500.00 - $4,500.00
-
Julabo Thermal P90
Thermal P90 JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for the best temperature control results. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are matched specifically with each JULABO temperature control unit. JULABO Thermal bath fluids have been carefully selected and optimized for maximum performance with JULABO instruments. Thermal P90 is a clear 2 cSt silicone fluid rated for use in JULABO PRESTO units only with a working temperature range of -90…+170 °C. This temperature range is only valid when used in PRESTO systems! The internal PRESTO cold oil overlay technology enables for safe operation above the fluid flashpoint. Low Toxicity Low viscosity High stability Minimum odor Good heat conductivity Low corrosion tendency Wide temperature ranges Working Temperature: 90 … +170
$1,218.00 - $2,346.00
-
Therminol 55 Moderate Heat Transfer Fluid (570°F)
Therminol 55 is a synthetic heat transfer fluid used in moderate-temperature applications. It's designed for use in nonpressurized/low-pressure, indirect heating systems. It delivers efficient, dependable, uniform process heat with no need for high pressures. Performance Benefits Long Life—You will get years of reliable, cost-effective performance, even when operating your system continuously at 300°C (570°F). This means you do not have to overspecify your fluid. Excellent resistance to fouling— Because Therminol 55 is a synthetic fluid, it resists the effects of oxidation 10 times better than mineral oils, meaning less oxidation and solids formation. For systems without nitrogen inerting, the performance advantages are significant. Excellent Low-Temperature Pumpability—Therminol 55 is still pumpable at –28°C (–18°F ), compared to some mineral oils that will not pump at temperatures below –7°C (20°F ). With Therminol 55, your heat transfer fluid system can start up quickly and easily. Therminol 55 Sample Certificate of Analysis COA Therminol 55 Safety Data Sheet SDSTherminol 55 Technical Data Sheet TDS
$85.00 - $3,050.00
-
Therminol 66 High Temperature Heat Transfer Fluid (650°F)
Therminol 66 is the world’s most popular high-temperature, liquid-phase heat transfer fluid. Therminol 66 is pumpable at low temperatures, and offers high temperature thermal stability. Performance Benefits Experience—Therminol 66 is the most popular high-temperature, liquid-phase heat transfer fluid in the world. No heat transfer fluid material in the world has a higher degree of customer satisfaction than Therminol 66. Proven Fluid—In a wide variety of applications and thousands of systems around the world, Therminol 66 delivers excellent performance. True 650° F (345° C) Performance—Therminol 66 sets the performance standard for high-temperature, liquid-phase fluids. Users can expect many years of reliable, trouble-free operation even when operating continuously at the recommended bulk temperature. Fouling Resistant—Therminol 66 is specifically engineered to resist solids formation and system fouling, providing more reliable operation and potential cost savings. Therminol 66 Sample Certificate of Analysis COA Therminol 66 Safety Data Sheet SDSTherminol 66 Technical Data Sheet TDS
$240.00 - $8,900.00
-
Therminol Therminol XP Heat Transfer Fluid (600°F)
Therminol XP Heat Transfer Fluid Premium heat transfer solution engineered for industrial excellence. Therminol XP is an exceptionally pure white mineral oil designed to deliver superior thermal performance, extended equipment life, and regulatory compliance across food, chemical, and specialty manufacturing applications. Why Choose Therminol XP Low FoulingPrecisely formulated chemical composition minimizes oxidation and degradation, reducing system fouling and extending maintenance intervals for lower operational costs. Thermal StabilityContinuous operation at bulk temperatures up to 315°C (600°F) with years of reliable, trouble-free performance—no thermal degradation concerns. Food-Grade SafetyMeets U.S. FDA Regulation 21 CFR 172.878 and NSF International registration (HT-1 category). Practically non-toxic formulation suitable for food contact and sensitive processing environments. Environmental ComplianceOutstanding regulatory status with minimal environmental reporting requirements, supporting corporate sustainability and ESG objectives. Applications Adhesives Desalination Dryer heating Fatty acid HTF - bakery HTF - deodorizing HTF - deodorizing oil and fat HTF - edible oil HTF - food production HTF - food/feed/beverage processing HTF - production of bioalcohol HTF - production of biodiesel Industrial Peek (polyether ether ketone) Phthalic anhydride Polyester (PET) Specialty and batch chemical production Specialty chemicals Technical Resources Safety Data Sheet | Technical Data Sheet
$165.00 - $4,500.00
-
DigiVac Thermocouple Plus | 531 Equivalent Vacuum Sensor - .001 to 6 Torr Accuracy
531 Thermocouple Plus Use for applications that require a better accuracy than others gauges can provide. Excellent for dirty applications where a replaceable sensor is desirable. Design for years of use Applications for Freeze-drying, low pressure distillations, fore line monitoring, and transformer dry out. Weight 1 lbs Shipping Dimensions 6 x 4 x 4 in Isolated no Vacuum Reference Absolute Display No Units Torr, mbar, bar, kPa, inches of Hg, mm Hg, millitorr, microns, inches of water, PSI, Pa Total Range .001-760 Range with Accuracy .001 – 6.0 Torr Sensor Type Thermocouple
$120.00
-
Thermometer Adapter
Glass Thermometer Adapters Glass thermometer adapters are used in conjunction with 1/4" temperature probes, these adapters allow the user to maintain a vacuum on their glassware system while being able to have a consistent readout of the internal temperature of the system. These adapters have a flexible gasket to seal around most temperature probes 3/16"-1/4" (4mm-7mm) in diameter. Joint Sizes Available: 14/20 Joint Size 24/40 Joint Size *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$15.00 - $17.00
-
Threaded Lab Stand Rod
Stainless Steel Threaded Rod 10 x 1.5mm Thread, 10mm Diameter rod, and is 24" in length and can be used as extra lattice supports in a any application.
$10.00 - $15.00
-
Throttle Valves for Pneumatic Presses
Throttle Valves for Pneumatic Presses Throttle Valve used to control the speed of your pneumatic press. Replace the fitting on the output side of your regulator. Thread Size: 1/2" NPT, Quick Connect Air Hose Size: 12mm
$20.00
-
Toluene ACS Reagent Grade 99.9%
Toluene ACS Reagent Grade 99.9% Toluene, also called methylbenzene is a colorless liquid with a flash point 40 °F. It is Less dense than water (7.2 lb / gal) and insoluble in water. Hence floats on water. This is an aromatic hydrocarbon that has a smell you would associate with paint thinners. It is a naturally occurring hydrocarbon found in crude oil. Toluene is volatile, flammable, and evaporates quickly. Toluene is the simplest member of the class toluenes consisting of a benzene core which bears a single methyl substituent. It is a non-polar solvent, Due to the presence of the methyl group, toluene is more reactive compared to benzene alone in the presence of electrophiles. Chemical Formula: C6H5CH3 Molecular Weight: 92.141 CAS Registry Number: 108-88-3 Appearance: Colorless Liquid Odor: sweet, pungent, benzene-like Density 0.8623 g/ml Boiling Point: 110.60C/231.08F Solubility in water: 0.519 g/L (25 °C) GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H225, H304, H315, H336, H361d, H373 GHS Precautionary Statements: P210, P240, P301+P310, P302+P352, P308+P313, P314, P403+P233 UN Identification Number: 1294 Proper Shipping Name: Toluene Transport Hazard Class: 3 Packing Group: II DOT Placard: What's The Difference Between Reagent Grade & Lab Grade Toluene? The terms "reagent grade" and "lab grade" are often used to describe the purity and quality of chemicals used in laboratory settings. While there isn't a universal standard definition for these terms, they generally indicate different levels of purity and suitability for specific laboratory applications. Here's the difference between reagent grade and lab grade toluene: Reagent Grade Toluene: Reagent grade chemicals are typically of higher purity compared to lab grade chemicals. Reagent grade toluene is purified to meet strict quality standards, with impurity levels kept to a minimum. Reagent grade toluene is suitable for use in analytical and research applications where precise measurements and high purity are required. It is commonly used in chromatography, spectroscopy, and other analytical techniques where impurities could interfere with the results. Reagent grade toluene may also undergo additional testing and quality control measures to ensure consistency and reliability in laboratory experiments. Lab Grade Toluene: Lab grade chemicals are generally of lower purity compared to reagent grade chemicals. Lab grade toluene may contain higher levels of impurities, although it still meets basic quality standards for laboratory use. Lab grade toluene is suitable for general laboratory applications where high levels of purity are not critical. It may be used in routine experiments, sample preparation, and other non-critical applications where the presence of impurities is acceptable. Lab grade toluene is often more cost-effective than reagent grade toluene, making it a suitable choice for educational institutions, industrial laboratories, and other settings where budget constraints may be a consideration. In summary, the main difference between reagent grade and lab grade toluene lies in the level of purity and suitability for specific laboratory applications. Reagent grade toluene is of higher purity and is suitable for analytical and research purposes, while lab grade toluene is of lower purity and is used in general laboratory applications where high purity is not critical. It's important to choose the appropriate grade of toluene based on the specific requirements of the experiment or application. Toluene ACS Reagent Grade Safety Data Sheet (SDS)
$24.00 - $825.00
-
Toluene Lab Grade 99.8% Purity
Toluene Lab Grade 99.8% Purity Toluene, also called methylbenzene is a colorless liquid with a flash point 40 °F. It is Less dense than water (7.2 lb / gal) and insoluble in water. Hence floats on water. This is an aromatic hydrocarbon that has a smell you would associate with paint thinners. It is a naturally occurring hydrocarbon found in crude oil. Toluene is volatile, flammable, and evaporates quickly. Toluene is the simplest member of the class toluenes consisting of a benzene core which bears a single methyl substituent. It is a non-polar solvent, Due to the presence of the methyl group, toluene is more reactive compared to benzene alone in the presence of electrophiles. Chemical Formula: C6H5CH3 Molecular Weight: 92.141 CAS Registry Number: 108-88-3 Appearance Colorless Liquid Odor: sweet, pungent, benzene-like Density 0.8623 g/ml Boiling Point: 110.60C/231.08F Solubility in water: 0.519 g/L (25 °C) GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H225, H304, H315, H336, H361d, H373 GHS Precautionary Statements P210, P240, P301+P310, P302+P352, P308+P313, P314, P403+P233 UN Identification Number: 1294 Proper Shipping Name: Toluene Transport Hazard Class: 3 Packing Group: II DOT Placard: What is Toluene? Toluene is a colorless, volatile, and flammable liquid aromatic hydrocarbon. It has a benzene ring substituted with a methyl group (-CH3), making its chemical formula C6H5CH3. Toluene is also known by other names such as methylbenzene or phenylmethane. It has a sweet, pungent odor and is miscible with many organic solvents but only slightly soluble in water. How Is Toluene Produced? Toluene is primarily produced as a byproduct of the petroleum refining process, specifically during the catalytic reforming of naphtha fractions. The main steps involved in the production of toluene include: Naphtha Fractionation: The process begins with the distillation of crude oil to separate it into various fractions, including naphtha. Naphtha is a mixture of hydrocarbons with carbon chain lengths typically ranging from C5 to C12. Catalytic Reforming: The naphtha fraction undergoes catalytic reforming, which is a process that involves subjecting the hydrocarbons to high temperature and pressure in the presence of a catalyst. The catalyst, often composed of platinum or platinum-rhenium on an alumina support, promotes various reactions such as dehydrogenation, isomerization, and cyclization. Aromatic Hydrocarbon Formation: During catalytic reforming, some of the naphtha molecules undergo dehydrogenation and cyclization reactions, leading to the formation of aromatic hydrocarbons, including benzene, toluene, and xylene (BTX). Toluene is specifically formed through the methylation of benzene, where a methyl group (-CH3) is added to the benzene ring. Separation and Purification: After catalytic reforming, the product stream is subjected to fractionation to separate the various components, including toluene, from other hydrocarbons. Distillation and other separation techniques are used to isolate and purify toluene from the mixture. Further Processing: The purified toluene can undergo further processing, such as hydrogenation to produce other chemicals like benzene or mixed xylenes. Toluene itself is used as a feedstock in the production of chemicals such as benzene, toluene diisocyanate (TDI), and polyurethanes. Overall, the production of toluene is closely linked to the refining of crude oil, with catalytic reforming being the primary method for its synthesis from petroleum-derived feedstocks. Other sources of toluene include coal tar and certain biomass conversion processes, although these are less common compared to petroleum-based production. What is Toluene used for? Toluene is a versatile chemical compound with numerous industrial and commercial applications. Some of the common uses of toluene include: Solvent: Toluene is primarily used as a solvent in various industries, including paint manufacturing, coatings, adhesives, and printing. It effectively dissolves other substances, making it valuable in these applications. Fuel Additive: Toluene is used as an octane booster in gasoline, improving its performance and reducing knocking in internal combustion engines. It is sometimes added to racing fuels and aviation fuels for this purpose. Production of Chemicals: Toluene serves as a precursor in the production of various chemicals, including benzene, which is used in the manufacture of plastics, synthetic fibers, and rubber. It's also used in the synthesis of toluene diisocyanate (TDI), which is a precursor to polyurethane foams. Rubber and Tire Manufacturing: Toluene is used in the production of rubber and tires as a solvent and as a component of rubber adhesives. Ink Manufacturing: Toluene is used as a solvent in the formulation of printing inks for newspapers, magazines, and packaging materials. Cleaning Products: It's used in some cleaning products, such as degreasers and spot removers, due to its excellent solvent properties. Nail Polish and Nail Polish Removers: Toluene is used as a solvent in nail polish and nail polish removers to dissolve and suspend other ingredients. Dye Production: Toluene is used in the production of dyes and as a solvent in the dyeing process for textiles and leather. Medicinal Uses: In some cases, toluene is used in pharmaceutical manufacturing processes as a solvent or as a precursor to certain drugs. These are just a few examples of the diverse range of applications for toluene. Its versatility and effectiveness as a solvent make it an essential chemical in many industries. However, Is Toluene Dangerous? Toluene poses several potential dangers to human health and the environment, especially when handled improperly or in high concentrations. Some of the key dangers associated with toluene include: Health Effects: Toluene vapor can be harmful if inhaled in high concentrations over a prolonged period. Short-term exposure to high levels of toluene vapor can cause symptoms such as headaches, dizziness, nausea, fatigue, confusion, and irritation of the eyes, nose, and throat. Long-term exposure to toluene may lead to more serious health issues, including damage to the central nervous system, liver, kidneys, and respiratory system. Flammability: Toluene is highly flammable and can form explosive mixtures with air. It has a low flash point, which means it can ignite easily in the presence of a spark, flame, or heat source. Handling toluene near open flames, hot surfaces, or other ignition sources can result in fires or explosions. Environmental Hazards: Toluene can contaminate soil, water, and air if released into the environment. It is volatile and can evaporate quickly from spills or during use, leading to air pollution. Toluene is also persistent in the environment and can bioaccumulate in aquatic organisms, potentially causing harm to ecosystems. Occupational Hazards: Workers in industries where toluene is used, such as paint manufacturing, printing, and chemical production, may be at risk of exposure to high levels of toluene vapor. Proper safety measures, including ventilation, personal protective equipment, and training on safe handling practices, are essential to minimize occupational exposure and prevent health issues. Reproductive and Developmental Effects: There is evidence to suggest that exposure to toluene may have adverse effects on reproductive health and fetal development. Pregnant women exposed to high levels of toluene may be at increased risk of miscarriage, premature birth, or birth defects in their offspring. Addiction Potential: Toluene abuse, primarily through intentional inhalation of its vapors for recreational purposes (known as "huffing" or "sniffing"), poses significant health risks, including addiction, neurological damage, and sudden death due to cardiac arrest or asphyxiation. Given these dangers, it is important to handle toluene with care, follow safety guidelines and regulations, and take appropriate precautions to minimize exposure to protect both human health and the environment. What Gaskets are recommended for Toluene? Toluene is a chemical solvent that can have compatibility issues with certain gasket materials, especially over prolonged exposure or at elevated temperatures. Some gasket materials that are generally considered compatible with toluene include: PTFE (Polytetrafluoroethylene): PTFE gaskets, commonly known as Teflon gaskets, are highly resistant to a wide range of chemicals, including toluene. They offer excellent chemical resistance and can withstand high temperatures, making them suitable for many toluene applications. Viton (Fluoroelastomer): Viton gaskets are known for their excellent chemical resistance and can often withstand exposure to toluene. They are commonly used in applications requiring resistance to fuels, oils, and solvents. Fluorocarbon (FKM): FKM gaskets are known for their exceptional chemical resistance, high temperature stability, and resistance to oils and fuels. They are often used in applications where exposure to toluene and other aggressive chemicals is expected, such as in the automotive, aerospace, and chemical processing industries. Is Toluene Polar or Nonpolar? Toluene is considered to be a nonpolar molecule.The reason for this is its symmetrical molecular structure. Toluene consists of a benzene ring (which is a hexagonal ring of carbon atoms with alternating single and double bonds) with a methyl group (-CH3) attached. The bonds between carbon and hydrogen in the methyl group are nonpolar, and the carbon-carbon bonds in the benzene ring are relatively nonpolar due to the similar electronegativities of carbon and hydrogen.Because of this symmetrical arrangement and the similar electronegativities of the atoms involved, the overall distribution of charge in the molecule is relatively uniform, resulting in a nonpolar molecule. As a nonpolar solvent, toluene is often used to dissolve nonpolar substances and is immiscible with polar solvents such as water Toluene Lab Grade Safety Data Sheet (SDS)
$19.00 - $750.00
-
Tool-Less Adapter Assembly
Tool-Less Adapter Assembly This adapter fits on 30mm OD glass flanges. The other side is 1/2" MNPT to connect to various fittings for attaching hoses and like items.
$85.00
-
The Press Club TPC x BYRD EXTRACTS TEMPLE BALL ROLLER
Temple balls have been made for centuries by using various traditional techniques from pressing the hash by hand (charas) or by using homemade tools such as wine bottles to homogenize the hash. Learn the full history of a temple ball from past to present here. After numerous broken wine bottles and burnt hands from making temple balls, we realized it was time to innovate and create a better solution for the community. Crafted in collaboration with Byrd Extracts Co and tested by leading hashishins like Cherry Blossom Belle —our new temple ball roller is equipped with every feature a hashishin might need: 🍎MATERIAL: Made of 100% borosilicate glass for enhanced durability and safety 🍎DOUBLE-SIDES HANDLES: Ensures even pressure during pressing 🍎VACUUM SEALED HANDLES: Heat barrier to prevent burns from boiling water 🍎LEAK-PROOF DESIGN: Custom branded stopper from The Press Club x Byrd Extract ensures a perfect, leak-free seal 🍎WIDER MIDDLE BODY DESIGN: Holds more boiling water = press longer = fewer water changes = improved efficiency 🍎ANTI-ROLL SUPPORTS: Wooden supports to prevent rolling when not in use 🍎HARD CASE INCLUDED: Includes a travel-friendly case 🍎HEAVY-DUTY STYROFOAM: Protects the roller during transport 🍎BOTTOM STORAGE COMPARTMENT: Integrated underneath for storing accessories and aging temple balls on the go ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$149.95
-
CPS Products TR21X2 Complete Rebuild Kit
TR21X2 Complete Rebuild Kit. Please note: this item may be backordered at any time due to high volume ordering through CPS. Please excuse this inconvenience. TR21X2 CPS TR21 Oil-less Compressor Rebuild Kit. Includes TR21X4 Head, Pistons, Bearings, Eccentrics, Cylinders, O rings And Bolts. Oil-less Compressor Head Assembly Includes valves assembled ready to install. This kit is compatible with the following CPS pump(s): TRS 21 Recovery Pump TRS 600 Recovery Pump
$390.00
-
CPS Products TR21X4 Compressor Head Complete Replacement
TR21X4 Compressor Head Complete Replacement TR21X4 CPS TR21 Oil-less Compressor Head Assembly. Includes valves assembled ready to install. Does not include a high pressure switch. This kit is compatible with the following CPS pumps: TRS 21 Recovery Pump TRS 19 Recovery Pump
$125.00
-
Thermo Scientific Traceable Kangaroo Thermometer - Digital
Digital Thermometer Traceable Kangaroo™ Thermometer comes equipped with the 42-inch probe cable in a reel-compartment pouch in the back of the unit. As a perfect “carry-around” unit, this thermometer can fit easily in any pocket, or you can use the convenient flip-open stand to place upright. The dual-range digital thermometer measures temperature in test tubes, beakers, and other scientific laboratory equipment and is especially effective for rugged applications with high-impact ABS cases. Additionally, digital thermometers can measure the temperature of many substances from air to liquids to surfaces—all electronically. The best thing about this thermometer? It’s easy to use! Any user can record identical results with this intuitive unit. The range is –58.0 to 572°F and –50.0 to 300°C with a resolution of 0.1° (between –19.9 to 199.9°) otherwise 1° and an accuracy of ±1°C (between –30 and 250°C) otherwise ±2°C. This unit automatically captures and recalls minimum and maximum temperature readings over any time period. Its high and low alarm may be programmed in 1° increments. The alarm sounds every minute until temperature returns to non-alarm condition. Pressing the HOLD key freezes the display to record a current reading. To assure accuracy, an individually serial-numbered Traceable® Certificate is provided from its ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). The stainless-steel probe has a diameter of 0.14 inches x 7-1/2 inch length and is resistant to most chemicals. The supplied silver-oxide battery runs continuously for one year. Large 3/4-inch digits are readable from 20 feet. Compact size is 2-1/2 x 4-3/4 x 1/2 inches, and weight is 2-3/4 ounces. Each product goes through an intense vetting process before carrying the Traceable name, which means you’ll save both time and money by not having to calibrate separately. The Traceable Kangaroo Thermometer applies to various unique applications such as the storage, laboratory, and medical industries. Specifications: Temperature Range F: -58 - 572F Temperature Range C: -50 - 300C Temperature Resolution: 0.1C Temperature Accuracy: +/-1C Programmable High and Low Alarm ISO 17025 Calibration Stainless Steel Probe Diameter of Probe: 0.14 in Length of Probe: 7.5 in Size: 2.5x4.75x.5 in Weight: 2.75 ounces
$60.00
-
Tri Clamp / Tri Clover U-Bend
Tri Clamp / Tri Clover U-Bend Tri-Clamp / Tri Clover connection U-Bend made out of 304 sanitary stainless steel allows the user to make a 180 degree connection with their system and redirect flow as needed: Tri-Clamp / Tri-Clover Sizes Available: 1" (Fits 1.5" Tri-Clamp) 1.5" 3" 6"
$50.00 - $250.00
-
Tri-Clamp Ball Valve 316L SS (Nitrogen Tested)
316L SS Tri-Clamp/Tri-Clover Ball Valve - Nitrogen Tested (Valve holds a 30 day limited warranty) The 316L Stainless Steel Tri-Clamp Sanitary connection ball valve allows the user to restrict flow on their extraction system and close off a connection to a spool to allow the material to soak for longer durations extracting more of the essential oils. This Ball Valve is 1/4 turn locking handle with the 3-piece PTFE encapsulated core that is rebuildable if needed. This ball valve is nitrogen tested for leaks at BVV™ to ensure the ball valve is safe to operate. Specifications Material: 316L Stainless Steel Handle Type: 1/4 Turn Locking Connection Type(s): Tri-Clamp Sizes Available: 1" (Fits 1.5" Tri-Clamp) 1.5" 2" Temperature Range: -20℃ To +150℃ Working Pressure: 1000 WOG BVV™ Tri Clamp Ball Valve - Data Sheet Note: the valve is warrantied for 30 days from defects in workmanship
$165.00 - $275.00
-
Tri-Clamp Direct Drive Mixers
Tri-Clamp Direct Drive Mixers 3/4 HP Air Direct Drive Tri-Clamp Mixer, (1) 4" PRL, 1" x 28" Exposed, Comp Mech Seal 3/4HP Shaft Length: 28" (From bottom of Tri-clamp) Air inlet port: 1/4" NPT Air adjustment valve to control speed Requires 30CFM @ 100 PSI air supply 3" Tri Clamp Flange mount 3/4 HP Variable Speed Electric Direct Drive Tri-Clamp Mount Mixer 3/4 HP 115V Power supply Shaft Length: 28" (From bottom of Tri-clamp) 3" Tri Clamp Flange mount 1 HP XP Direct Drive Tri-Clamp Mixer, Mech. Seal, (1) 5.5" HEI, 0.625" x 28" Exposed Shaft, VFD Motor: 1 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2,Div 1, Group F&G, Temp Code T4, 10:1 Turndown, 208-230/460V,3Ph, 1760 RPM VFD Controler: 1HP Speed Controller with Digital RPM Readout in Outdoor Rated NEMA 4X Enclosure, 240V/1Ph (Mounted Outside of XP Area)w/ Local XP Control Package, 352 to 1760 RPM, Mounted to Motor ,Bare Wire Leads Seal: 316 SS 60 Series 2-Piece Mechanical Inside Seal w/Viton ORings; Carbon-Graphite Rotary, Sintered Silicon Carbide Stationary, Hastelloy C-276 Springs, Dry Running, Sealed for Pressure/Vacuum Wetted Surface Finish: Mill Shaft: 0.625'' x 28'' Exposed Length, 316SS Bottom Impeller: 5.5'' High Efficiency Impeller, 3 Blades, Low Shear,316SS 2" Tri Clamp Flange mount **On Site Wiring Required**
$3,600.00 - $5,200.00
-
Tri-Clamp Ferrule
Tri-Clamp/ Tri Clover Ferrule Tri-clamp ferrules are the bottom of our open blast systems. These ferrules allow the user to use a screened gasket at the end of an open blast spool while providing an open end. Specifications: Material: 304 Stainless Steel Connection Type: Tri-Clamp Standard: 3A Sizes Available: 1.5" 2" 3"
$6.00 - $8.00
-
Tri-Clamp Filter Plate
Stainless Steel Tri-Clamp/ Tri Clover Filter Plate Stainless steel filter plates offer the user a great solid platform to help with filtration during the extraction process and they come standard with a 100 mesh (150 Micron) pre-cut stainless steel mesh filter media and a solid filter plate ring (unless otherwise specified). These filter plates can be used simultaneously with ashless filter papers or any other filtration media like stainless steel ball bearings or steel wool to increase surface and filtration level to remove fats, lipids, waxes and any other unwanted material during the extraction process. For 6" sizes and above, a high pressure clamp is recommended for all filtering applications. *Note: Does not include Clamp or Gasket. **Note: 8" Sizes come with a compression ring instead of a solid filter plate ring. Sizes Available: 1.5" - Includes Solid Filter Plate Ring 2" - Includes Solid Filter Plate Ring 3" - Includes Solid Filter Plate Ring 4" - Includes Solid Filter Plate Ring 6" - Includes Solid Filter Plate Ring 8" - Includes Standard COMPRESSION Ring 10" - Includes Solid Filter Plate Ring 12" - Includes Solid Filter Plate Ring Specifications Material 304 Stainless Steel Standard 3A High Polish Connection Type(s) Tri-Clamp Hole Diameter 5.8mm Height 2" Mesh Specs 100 Mesh (150 Micron) - 304 Stainless Steel BVV™ Tri-Clamp Filter Plate - Drawing
$41.00 - $290.00
-
Tri-Clamp Neoprene Insulation Sleeve by BVV
BVV Neoprene Insulation Sleeve's Our Insulation sleeves are made from 3mm durable Neoprene Scuba Fabric and has a rated insulation value of R 1.5 These sleeves are 90% polyester and 10% spandex which makes all of these a snug fit around the spools. The material weighs in at 350 grams per square meter and has a smooth finish and a double stitched side seam. The sleeves can be easily cut with scissors and modified to add custom cutouts. The sleeves are also reversible and the inside color is black. Note: *Customers who order De-Wax or Fully Jacketed spool sleeves will not have pre-cut holes for the side ports. But fear not this material cuts very easily with sharp cutting tools, and you can easily add the small holes for these ports. BVV's Tested Temperatures: -80°C to 105°C (-112°F to 220°F) we have not tested beyond these temperature, it doesn't mean it not capable its just untested by BVV.
$8.00 - $57.81
-
Tri-Clamp Quadpod
Tri-Clamp Quadpod Quadpods provide an excellent solution to holding any Tri-Clamp spool vertically. From closed columns to open blast extraction units, Quadpods are designed to fit over Pyrex dishes without getting in the way. This device has 4 legs, 4.5" in length, and extends 7" outward in each direction. Furthermore, each leg is welded to the clamp to provide a sturdy and durable platform. Sizes Available: 1.5" 2" 3" Specifications: Material 304 Stainless Steel Connection Type(s): Tri-Clamp
$36.00 - $45.00
-
Tri-Clamp Sight Glass - Long
Tri-Clamp Sight Glass - Long These tall sight glasses are a great additions closed-loop extraction system to view the liquefied solvent flowing through your system and see the color before the purging process is completed. The short sight glass also allows the user to add a viewing port to their system without adding a lot of additional height compared to a normal Tri-Clamp sight glass. Unlike many competitors, this sight glass is also nitrogen tested for leaks at 100 PSI before it is sent to the customer to ensure safe operation of their extraction system. ***Note: Does not include clamp or gasket. Specifications: Sight Glass Material: 304 Stainless Steel Glass Material: Borosilicate Gasket Material: Buna Connection Type: Tri-Clamp x Tri-Clamp
$84.00 - $365.00
-
Tri-Clamp Sight Glass 250 PSI - Peer Reviewed Certified
Neocision Sight Glass Tempered Strengthened Soda Lime Glass The 3 piece Neocision certified sight glasses offer a greater chemical resistance, viewing area, and cleanability compared to a traditional sight glass such as polycarbonate or Metaglas sight glasses. These Tri-Clamp sight glasses consist of 3 pieces: the tempered glass disc, Viton x-profile gasket, and custom tri-clamp ferrule. When used in combination with high-pressure clamps the working PSI is rated at 250 PSI (3rd party tested). These glasses are also resistant to thermal shock, enduring extreme heating and cooling temperatures. A Viton Tri-Clamp gasket must be used to conform with the certification ratings, and and is included. ***Disclaimer: Please handle with care when installing on to a system and do not overtighten or the glass disc may chip if the clamp torque ratings are exceeded. Clamp Torque Specification Sheet Sizes Available: 1.5" Tri-Clamp 2" Tri-Clamp Ferrule Material 304 Stainless Steel Glass Material Tempered Soda Lime Gasket Material Viton(FKM) Connection Type(s) Tri-Clamp PSI Rating 250 PSI Negative Temperature Rating -40C BVV™ Neocision Sight Glass - Certified Data Sheet
$78.00 - $82.00
-
Tri-Clamp Single Hinge Clamp
Tri-Clamp Single Hinge Clamp The BVV Tri-Clamp Single Hinge Clamp is engineered for sanitary process applications requiring reliable, repeatable connections. Constructed from 304 stainless steel with precision-machined components, this clamp delivers superior performance in food, beverage, pharmaceutical, and industrial processing environments. Material Specifications: Body: 304 stainless steel Connection: Standard Tri-Clamp interface Design: Single hinged mounting (1.5" models feature double hinge) Installation Guidelines:Achieve optimal performance by tightening to finger-tight, then applying approximately 2 full turns with a screwdriver or wrench. Consult the Torque Specification Data Sheet for precise torque values. Proper installation prevents gasket over-compression and thread stress that can compromise seal integrity and operational longevity. View Torque Specification Data Sheet
$10.50 - $95.00
-
Tri-Clamp Spool with 2" Angled Ports
304 Stainless Steel Tri-Clamp Spools with 2" Angled Ports allow the user varying amounts of configuration and also the ability to put 2 sight glass end caps on the 2" Ports to allow the user to view the flow inside of a column or spool.Sizes Available: 4" Tri-Clamp x 6" Length x (2) 2" Angled Ports 6" Tri-Clamp x 6" Length x (2) 2" Angled Ports
$215.00 - $285.00
-
Tri-Clamp Spool x 3" Length x 1/4" MNPT
1.5" Tri-Clamp/ Tri Clover x 3" x 1/4" MNPT
$35.00
-
Tri-Clamp to 1" Barb
Tri-Clamp to 1" Barb / Tri Clover End Caps These tri-clamp end caps: Have a 1" Hose Barb connection Come in either 1.5", 2" tri-clamp sizes Are made of 304 stainless steel
$39.00
-
Tri-Clamp Topcap with Valve and 1/4" 37 Degree JIC Flare -40 to 230C
Tri-Clamp / Tri Clover Top cap with Valve and 1/4" 37 Degree JIC Flare (Nitrogen Tested) Pre-installed 1/4" 37 Degree JIC Flare and 304 stainless steel ball valve on a Tri-Clamp endcap. These endcaps and valves and nitrogen tested for leaks to ensure safe usage of any extraction system. Flare endcaps are useful when connecting PTFE lined stainless steel braided hoses to a system because the flared connection type requires NO PTFE tape to create a seal, unlike many threaded connections. Specifications: 304 Stainless Steel Tri-Clamp Endcap 304 Stainless Steel Heavy Duty Ball Valve -40 to 230C (1/4" MNPT/FNPT Connections) 304 Stainless Steel 1/4" 37 Degree JIC Flare Pre-Assembled and Nitrogen Tested for Leaks at Best Value Vacs Tri-Clamp Sizes Available: 1.5" 2" 3" 4" 6"
$72.00 - $130.00
-
Tri-Clamp Topcap with Valve and 1/4" Barb
Tri-Clamp/ Tri Clover Top cap with Valve and 1/4" Barb Pre-installed 1/4" hose barb (Fits 1/4" ID Hoses) and 304 stainless steel ball valve on a Tri-Clamp endcap. These endcaps and valves and nitrogen tested for leaks to ensure safe usage of any extraction system. Barb endcaps are useful when connecting flexible tubing to the barb connection to transfer fluids easily or even pull a vacuum on an extraction system instead of using flared connections. ***Note: Please check the pressure rating of the tubing that is going to be used beforehand. Specifications: 304 Stainless Steel Tri-Clamp Endcap 304 Stainless Steel Heavy Duty Ball Valve -40 to 230C (1/4" MNPT/FNPT Connections) 304 Stainless Steel Hose Barb (Fits 1/4" ID Hose) Pre-Assembled and Nitrogen Tested for Leaks at Best Value Vacs Tri-Clamp Sizes Available: 1.5" 2" 3" 4" 6"
$73.00 - $131.00
-
Tri-Clamp Welded Bottom Base
Welded Bottom Tri-Clamp/ Tri Clover Base These stainless steel welded bottom bases are the standard base for our extraction systems and provide the user with a heavy duty and high capacity way to collect and recovery their extracted material and solvent. Many people will have several of these welded bases set aside to quickly swap out their base on their extractor to reduce the time between system runs. Sizes Available: 4" x 4" 6" x 6" 8" x 12" 10" x 12" 12" x 12" Specifications: Material 304 Stainless Steel Standard 3A High Polish Connection Type(s): Tri-Clamp Welded Bottom Thickness 0.25" - 0.50" BVV™ Tri-Clamp Welded Bottom Base - Drawing
$65.00 - $245.00
-
Triclamp / Tri Clover Y
Specifications: 304 Grade Stainless Steel w/ High Polish interior Fits 1" or 1.5" Triclamp Unique Y Connection Disclaimer: All Stainless Steel Parts bought seperately to piece together a Closed Loop, Closed Column, or Open Blast Extractor DO NOT come with a standard 1 year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.User assumes all responsibility and risks of the system"
$58.00
-
Triclamp Spool x 3" Length x (2)1/4" Female NPT
Specifications: 304 Grade Stainless Steel w/ High Polish interior Fits 1.5" or 2" Triclamp / Tri Clover (2)1/4" Female NPT Port 3" Tall Disclaimer: All Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractor DO NOT come with a standard 1-year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.User assumes all responsibility and risks of the system
$45.00
-
Triclamp Spool x 3" Length x 1/4" Female NPT
Specifications: 304 Grade Stainless Steel w/ High Polish interior Fits 1.5" or 2" Triclamp 1/4" Female NPT Port 3" Tall Disclaimer: All Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractor DO NOT come with a standard 1-year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.User assumes all responsibility and risks of the system BVV™ Triclamp Spool x 3" Length x 1/4" Female NPT - Drawing
$45.00
-
Triclamp T
Sanitary Tri-Clamp Tee – 304 Stainless Steel (3A Certified) Upgrade your sanitary processing system with BVV’s high-quality Tri-Clamp Tees, precision-engineered from 304 stainless steel for superior corrosion resistance and long-lasting performance. Manufactured in accordance with 3A sanitary standards, these tees are ideal for use in food, beverage, pharmaceutical, and botanical extraction applications. ✅ 3-Way Tee Design for optimal flow distribution✅ High-Polish 304 Stainless Steel – Durable, hygienic, easy to clean✅ Available Sizes: 1.5", 2", and 6" Tri-Clamp connections✅ Compatible with standard Tri-Clamp fittings, gaskets, and clamps✅ Ideal for sanitary process piping, closed-loop extraction, and lab builds BVV’s Tri-Clamp fittings are trusted by industry professionals for their precision, quality, and performance. Whether you’re building out a new system or upgrading your existing setup, our Tri-Clamp Tees deliver reliability where it matters most.
$30.00 - $200.00
-
Triple Neck Cow Receiving Flask
Triple Neck Cow Receiving Flask Triple Neck Cow Receiving Flask with 24/40 female joints. Triple neck cow receiver volume is 250ml. Includes GL-14 port. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$80.00
-
TRS21 & BVV Butane Recovery Pump Valve Rebuild Kit
This is the complete valve rebuild kit for the cylinder head on the BVV Recovery pumps or the TRS21. This is only for 2 pistons. So if you have the BVV 4 Cylinder pump you would need two kits. These gaskets are upgraded and are compatible with butane and propane gasses, all the O-ring seals in this kit are Viton
$96.00
-
TRS21 / BVV Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction
BVV-1 Included in this kit: Complete connecting rod assemblies with 2-piece SS piston, piston seals, and viton o-rings. This upgrade kit can be used for the following recovery pumps: CPS TRS21 Anti-spark/explosion pump BVV 2 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified BVV 4 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified - Requires 2 kits because this unit has 4 cylinders. Looking to rebuild your TRS21 and want to upgrade to a more efficient and longer lasting piston/rod setup? This kit comes with a fully assembled connection rod and 2 piece piston. The piston is made out of SS making it a great choice for any application where bacterial growth must be eliminated. This design focuses on long life piston seal and wear band. This kit utilizes a Viton energized o-ring specifically designed for butane and or propane recovery used in the extraction process. By utilizing this kit the piston seal and wear band can be easily removed without having to disassemble the rod from crank. An inexpensive tool (*NOT INCLUDED* SKU: BVV-TL1) is required to rebuild the seals next time service is needed. The tool uses two posts to lock into the top of the piston and a 5/8” Hex heat to remove the top part of the piston. If you would like to purchase both the piston/rod assembly and tool it’s (SKU:BVV-K1). If the tool is not used the customer is responsible for all damage done to piston. After this has been done the wear ring can slide out and the piston seal can be replaced with a new one, the kit can be purchased for all future piston seal and wear band rebuilds (*NOT INCLUDED* SKU: BVV-3). Loctite 242 (*NOT INCLUDED) will also be required for proper installation. A test was performed between the OEM piston and seal design and the BVV. Results show that the BVV had a much less leak rate than the OEM design. After hours of use the leak rate of the OEM design was unable to recover the complete initial solvent batch. This affects the efficiency of the recovery process.
$195.00
-
TRS21 / BVV Upgraded Top Piston Assembly
BVV-3 Included in this kit: Top piston assembly with piston seal and piston wear band. This upgrade kit can be used for the following recovery pumps: CPS TRS21 Anti-spark/explosion pump BVV 2 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified BVV 4 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified - Requires 2 kits because this unit has 4 cylinders. BVV CMEP-OL Retro Fit Upgraded Head - Requires 2 kits because this unit has 4 cylinders. BVV 4 Cyl & 2 Cyl Pump Seal Rebuild Instructions If you have upgraded to the 2-piece SS piston design this kit is used to rebuild the piston seal and wear band. Piston tool (SKU: BVV-TL1) and Loctite 242 will be needed to properly install. If tool is not used the customer is responsible for any damage done to piston during assembly.
$120.00
-
TRS21 2 Piece Piston Tool
BVV-TL1 Included: 2-piece piston tool. This tool is specially used to rebuild BVV-1. It features two posts that lock into the top of the piston and a 5/8” hex head for easy installation. This tool is required to install top piston assembly without damaging the piston. If this tool is not used the customer is responsible for all damage done to piston.
$13.00
-
CPS Products TRS21 Active Closed Loop Recovery Kit
This is an Upgrade Kit which can be added to any one of our passive systems making it into an "Active" Closed Loop System. The Active Recovery Upgrade Kit will increase recovery times by condensing the vapor a lot faster than just a hot/cold differential. This will increase efficiency and productivity, many professionals use this method, as this drives profits. This Kit Includes the Following: TRS21 Refrigerant Recovery Pump Best Value Vacs Large Condensing Coil 1/4" x 24" SS JIC Braided Hose (3) 1/4" x 48" SS JIC Braided Hose 1/4" x 60" SS JIC Braided Hose Molecular Sieve Filter Drier BVV 5' HVAC Hose BVV Vacuum Tee The Upgraded version of the TRS21 comes pre-installed with higher quality internal components that increase recovery speed drastically and also comes with 3/8" JIC and SAE Flares to reduce restrictions in the pump and increase flow/recovery rates. DISCLAIMER: The Upgraded version will still come with standard 1/4" Hoses and Fittings. Upgraded Version Includes: Standard 1/4" Flares Upgraded Inlet/Outlet 3/8" JIC and SAE Flares 2 Piece SS Pistons GEN III Piston Seals Viton O-Rings Stainless Steel Fittings TRS21 Upgrade Kits: TRS21 Upgraded Top Piston Assembly TRS21 Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction TRS21 Upgraded Compressor head SS ¼” SAE 45D IN and OUT fittings TRS21 Complete Connecting Rod Assembly Upgrade Kit TRS21 2 Piece Piston Tool CPS Rebuild Kits:• TR21X1 Valve Rebuild Kit• TR21X2 Complete Rebuild Kit• TR21X3 Piston Rebuild Kit• TR21X4 Head Rebuild Kit ***Note: Running any solvent that is not authorized by CPS voids all warranty. Running any solvent mixed with any organic plant material will instantly void all warranty. Any Odor coming from the pump or organic plant residuals will also void all warranty.
$1,850.00
-
TRS21 Anti-spark/explosion pump Standard
The TRS21 is an Anti-Spark/Explosion pump designed and built specifically for R-600, Ignition Proof Construction meets ANSI/ISA 12:12.1 The pump can be used to recirculate the solvent through the system increasing speed of processing and yield, or just to reclaim the solvent to greatly increase recovery time to minutes. Key Features: • CPS TRS21 R-600 Recovery Pump, 2 Cylinder Oil-Less Compressor Specifications:• Recovery Rates: Vapor- 2.5lb/min, Liquid-12lb/min• Ignition Proof Construction ANSI/ISA 12:12.1• Power : 115 VAC, 60 Hz, 10 Amps• Power: 850 watts • Filtration: Internal 100 mesh Screen integrated into Suction Port• Weight : 24 LBS MaintenancePlease note regular maintenance and replacement of seals is NOT covered under warranty as these are normal wear and tear items. Compressor Seals will require re-build after 200-240hrs of operation, depending on use. We stock the following compatible rebuild kits for your convenience: Upgraded TRS21 Rebuild Kits: TRS21 Upgraded Top Piston Assembly TRS21 Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction TRS21 Upgraded Compressor head SS ¼” SAE 45D IN and OUT fittings TRS21 Complete Connecting Rod Assembly Upgrade Kit TRS21 2 Piece Piston Tool CPS Rebuild Kits: TR21X1 Valve Rebuild Kit TR21X2 Complete Rebuild Kit TR21X3 Piston Rebuild Kit TR21X4 Head Rebuild Kit ***DISCLAIMER TO CUSTOMER: Running any solvent that is not authorized by CPS voids all warranty. Running any solvent mixed with any organic plant material will instantly void all warranty. Any Odor coming from the pump or organic plant residuals will also void all warranty.
$875.00
-
TRS21 Complete Connecting Rod Assembly Upgrade Kit
BVV-K1 Included in this kit: Complete connecting rod assemblies with 2-piece SS piston, piston seals, viton o-rings, and 2-piece piston tool. Looking to rebuild your TRS21 and want to upgrade to a more efficient and longer lasting piston/rod setup? This kit comes with a fully assembled connection rod and 2 piece piston. The piston is made out of SS making it a great choice for any application where bacterial growth must be eliminated. This design focuses on long life piston seal and wear band. This kit utilizes a Viton energized o-ring specifically designed for butane and or propane recovery used in the extraction process. By utilizing this kit the piston seal and wear band can be easily removed without having to disassemble the rod from crank. An inexpensive tool (*INCLUDED* SKU: BVV-TL1) is required to rebuild the seals next time service is needed. The tool uses two posts to lock into the top of the piston and a 5/8” Hex heat to remove the top part of the piston. After this has been done the wear ring can slide out and the piston seal can be replaced with a new one, the kit can be purchased for all future piston seal and wear band rebuilds (*NOT INCLUDED* SKU: BVV-3). Loctite 242 (*NOT INCLUDED*) will also be required for proper installation. A test was performed between the OEM piston and seal design and the BVV. Results show that the BVV had a much less leak rate than the OEM design. After hours of use the leak rate of the OEM design was unable to recover the complete initial solvent batch. This affects the efficiency of the recovery process.
$160.00
You have seen 1632 out of 1731 products