Products
-
Solvent Pro Series 60/80 Gasket
Solvent Pro Series 60/80 Gasket This is a replacement Gasket for 10, 30, and 50L Solvent Pro Rotary Evaporators. This gasket fits an 60mm(2.36") Inner Diameter and 80mm(3.15") Outer Diameter joint. The gasket material is made of Silicone surrounded by a PTFE Envelope.
$21.00
-
Solvent Recovery Kit - 2 Gallon (Compares to ExtractCraft Source Turbo)
Solvent Recovery Kit - 2 Gallon The BVV Solvent Recovery Kit makes it easy for anyone to recover and reuse their extraction solvent. The kit uses a vacuum pump to lower the boiling point of the solvent, then will use a cooling source such as ice or dry ice to turn the vaporized solvent back into liquid form. This kit has a few different seals, be sure that all materials are compatible with your solvent. These materials include: Viton (FKM) Silicone EPDM / Butyl Please verify before using that all these materials are compatible with your solvent. For an easy resistance chart please visit the Cole Parmer link below: https://www.coleparmer.com/chemical-resistance What's included: No Pump BVV-2G Condensing Coil Hosing Glass Vacuum Chamber Lids/hardware Receiving Vessel Chamber Air Inlet Filter Evaporating Vessel Induction Heating Plate With Pump BVV-2G-V40 Condensing Coil Hosing Glass Vacuum Chamber Lids/hardware Receiving Vessel Chamber Air Inlet Filter Evaporating Vessel Induction Heating Plate Chemically Resistant Vacuum Pump No Evap/ Pump BVV-2G-NEV Condensing Coil Hosing Glass Vacuum Chamber Lids/hardware Receiving Vessel Chamber Air Inlet Filter Evaporating Vessel LID with Universal Gasket *NOTE: This option will fit any pot with an outer diameter of 6.5" - 10.5" Not included in the kit, you will need: Ice Tray Ice Bucket Ice or dry ice A 5 gallon bucket and disposable aluminum catering tray will suffice, however a container with a drain plug or valve would be ideal to easily drain the water produced throughout the process. This kit requires a vacuum pump to operate, we would recommend a chemically resistant diaphragm vacuum pump. We include a 1/4" JIC and 1/4" barb connection to connect to your vacuum pump. The included hosing is 1/4" ID Tygon tubing to easily attach to a barbed vacuum pump. Running the Unit Caution: Unit uses flammable solvents. Use caution while operating unit. ALWAYS OPERATE IN EXTREMELY WELL VENTILATED AREAS Place your solution into the Evaporating Vessel. This can be done by: removing the lid and pouring the solution into the vessel Using the vacuum pump to suck the liquid mixture through the Liquid Inlet Port. Using this method, you can use a Micro-Cap filter in-line to remove solid particulate. Close the Liquid Inlet Port valve and Air Inlet valve Add ice to the bucket and tray. A drain valve built in to the ice bucket and tray would help to drain water later in the test. Open the Vacuum Pump valve and turn on the Vacuum Pump Turn on the Heat Plate. An induction heating plate is recommended Replace ice as needed throughout the run When recovery is completed, close the Vacuum Pump valve and turn off the Vacuum Pump. Open the Air Inlet valve and release the vacuum pressure from the chamber. Use the included micron filter to prevent contaminants from entering the vessel. Turn off the Heat Plate and allow the solute in the Evaporating Vessel to come down to a safe temperature. Removing the solute is easiest when it is still warm. Remove the solvent from the Receiving Vessel. Once the kit is cooled down, use clean ethanol to wipe down the sealing surfaces for the next run. For a more detailed operating procedure please be sure to check out this website: HOME EXTRACTION BY ICHIBANCRAFTER : https://extractcrafter.com/2022/05/10/diy-vacuum-still-part-2-putting-together-and-operation/
$642.00 - $2,485.00
-
Soya Peptone Powder for Mushrooms Mycology
Soya Peptone Powder Bacteriological GradeBest for Vigorous Mycelia Growth Soya peptone is a protein hydrolysate derived from soybeans, used as a rich nutrient source in microbiological culture media and fermentation media to promote the rapid growth of microorganisms, particularly fastidious ones. It serves as a source of nitrogen and other essential nutrients, is available in powder form STORAGE: Cool dry conditions, sealed original package Mix: Mix: 1 gram per. 500ml pH: 6.41 ODOR: Soy bean protein smell. SOLUBILITY: Soluble in water. TOTAL NITROGEN: 10.45% W/W TOTAL ALPHA AMINO NITROGEN: 3.09% W/W TOTAL PLATE COUNT: 1098 CFU/gm YEAST AND MOLDS:: 200CFU/gm E.COLI: NEGATIVE SALMONELLA: NEGATIVE STA{HYLOCOCCUS AUREUS: NEGATIVE PSEUDOMONAS AERUGINOSA: NEGATIVE SHELFLIFE: 4 years. CAS# 91079-46-8 Directions for Use: 1. Mix 1g of soya peptone powder per 500ml of liquid culture or agar recipe for vigorous mycelia growth. 2. Boil and stir until powder is fully dissolved. Sterilize the mixture for 45min @15psi 250°F (121°C) in a pressure cooker or autoclave.
$17.00 - $64.00
-
Space Saver Mobile Oven Cart with Ovens
BVV Space Saver Mobile Oven Cart with Ovens The BVV Space Saver Mobile Oven Cart allows users to greatly increase their output and more efficiently all in one place! There are a total of 4 options in this listing: 1) Three 1.9 Neocision Ovens + 1 UL listed BVV Vacuum Pump 2) Two 1.9 Neocision Ovens + 1 UL listed BVV Vacuum Pump 3) Three 0.9 Neocision Ovens + 1 UL listed BVV Vacuum Pump 4) Two 0.9 Neocision Ovens + 1 UL listed BVV Vacuum Pump If these options don't fit your needs, we also encourage you to expand your options by ordering parts individually or reach out to us (331-281-0154) so we can help create the kit right for you. Included in all the kits is the Heavy Duty Steel Mobile Cart that was designed by us to hold up to three ovens! It also has three height adjustable shelves to suit your needs and can be placed on either side of the bracket. The cart is mobile with its swivel caster wheels and they can can support up to 1,100lbs! The cart can house oven sizes such as the 0.9 and 1.9, Neocision and ECO oven. The oven shelves are made of aluminum and we recommend covering the shelves with silicone pads or a PTFE sheet that can be cut to size. The oven shelves are made of aluminum and we recommend covering the shelves with silicone pads or a PTFE sheet that can be cut to size. It is recommended to change the oil when the color starts to get noticeably darker in the pump. Also included in the kit is our premium Mobil Vacuum Pump Oil. This oil has a longer usable life and does not generate any additional vapor or odor, which will be sure to help your vacuum pump exhaust filter live longer too! Note: The Heavy Duty Steel Mobile Cart shipped does NOT come with the side shelves assembled. Required tool: 5mm ball hex (NOT INCLUDED).
$7,600.00 - $10,925.00
-
Special Blue Special Blue Monster Pro 2 Torch Lighter
The Special Blue Monster Pro 2 Torch Lighter is perfect for hands-free use and works at any angle. The torch measures 8 inches tall and features automatic ignition, an adjustable twin burner system, and quick refilling with butane. Perfect for dabs, barbecues, incense, and more! Multiple color options available. Key Features: Wind-Resistant Flame: Ensures consistent performance in any environment, making it perfect for outdoor use. Adjustable Flame Control: Fine-tune the flame size for delicate tasks or high-powered applications. Refillable Butane Tank: Compatible with Special Blue’s clean burning butane (sold separately). Convenient Toolbox: Keep your torch and accessories organized and ready for use. Applications: Ideal for lighting cigars, grills, and campfires. Perfect for culinary tasks such as caramelizing and searing. Great for soldering, crafting, and other professional or hobbyist projects. Note: Ships empty and requires butane refills, available separately.
$21.00
-
Splatter Platters
Splatter Platters Splatter platters are a huge step up from normal Tri-Clamp/ Tri Clover bases used on extractors because they provide the user a more effective way of pouring and scraping the extracted material out of the base. These splatter platters are much lighter and easier to deal with during the post-extraction process. Sizes Available: 4" 6" 8" 10" 12" Specifications: Material 304 Stainless Steel Standard 3A High Polish Connection Type(s): Tri-Clamp Height 2" BVV™ Splatter Platters - Drawing
$58.00 - $155.00
-
SSP - Union Elbow - 1/2" Tube x 3/8"
Stainless Steel SSP -Union Elbow 1/2" x 3/8" Duolok
$55.00
-
SSP Corporation SSP - Union Elbow - 3/8" Duolok
Stainless Steel SSP -Union Elbow 3/8" Duolok
$46.00
-
SSP Corporation SSP 1/2" Compression Fitting Parts
SSP 1/2" Compression Fitting Parts ISSD8N: Duolok Tube Fittings, 1/2 in. Nut ISSD8FF: SSP® Duolok® Front Ferrule, FF Series, Nominal Size: 1/2 in, 316 Stainless Steel ISSD8BF: SSP® Duolok® Back Ferrule, BF Series, Nominal Size: 1/2 in, 1/2 in ID, 316 Stainless Steel
$2.00 - $6.00
-
Stacking Filter Plate Ring Kit
Stacking Filter Plate Ring KIT This Stacking Filter Plate and Ring Kit allows the user to stack multiple levels of filtration while having the rigidity of a solid filter plate. These components are made out of 304 polished stainless steel and will fit inside of the corresponding Tri-Clamp/ Tri Clover parts. The stainless steel rings are solid and measure 8mm in thickness and the filter plates measure about 3mm in thickness with 6mm holes. This Kit Includes: 1x Filter Plate 2x Drop-in Retaining Rings Sizes Available: 1.5" 2" 3" 4" 6" 8" 10" 12" Specifications Material 304 Stainless Steel Ring Thickness 8mm Plate Thickness 3mm Plate Hole Size 6mm
$30.00 - $160.00
-
Stainless Steel 1/4" Hose Barb x 1/4" 37 Degree Flare
Stainless Steel 1/4" Hose Barb x 1/4" 37° Flare
$8.00
-
Stainless Steel 24/40 x 1.5" Tri-Clamp Adapter
Stainless Steel 24/40 x 1.5" Tri-Clamp/ Tri Clover Adapter This Custom Built 304 Stainless Steel Adapter allows the user to adapt to a 24/40 ground glass joint to a 1.5" Tri-Clamp fitting to allow the user to connect the glass joint to a Tri-Clamp system.
$55.00
-
DuraChoice Stainless Steel 316 (CF8M) Seal Welded Full Port Ball Valve - 2,000 PSI (WOG)
DuraChoice Full Port Welded 316 Stainless Steel Ball Valve - 2000WOG Designed for petroleum and natural gas production, the VBS2KF line of high-pressure valves is pressure rated at 2,000 psi and formulated to resist the corrosion that can plague other ball valves in oilfield or refinery conditions. The valve is seal welded for additional strength.S.S. 316 (CF8M) investment casting, 2-piece full port body designWorking pressure of 2,000 PSI (WOG)Suitable for full range of liquids and gasesSeal weldedLow operation torque100% individually testedBlowout-proof stemNPT threaded ends to ANSI B1.20.1Meets NACE MR0175 standardISO 9001 StandardHeavy duty locking handle with insulator Designation - MaterialBody - SS 316 (CF8M)Ball - SS 304Cap - SS 316 (CF8M)Ball Seat - RPTFEThrust Washer - RPTFEStem Packing - PTFEStem - SS 304Gland Nut - SS 304Handle Washer - SS 304Handle Nut - A2-70Handle - SS 201Handle Lock - SS 201Handle Cover - Plastic
$40.00
-
Stainless Steel Butane/Propane Tank Fitting CGA 510
Stainless Steel Butane/Propane Tank Fitting CGA 510 Custom Stainless Steel CGA 510 Butane and Propane Tank Fitting with Viton O-Ring. Specifications: CGA 510 Thread with Viton O-ring seal and either 1/4" MNPT or 1/4", 3/8", 1/2" Flare Material: Stainless Steel
$25.00 - $95.00
-
Stainless Steel Condensing Coils
BVV SS304 Condensing Coils are used in solvent injection kits such as the one show in the video below. They are used to condense ethanol or other hydrocarbons to decrease run times and allow for a pre-chilling of the solvent to be used in the extraction processes. For dry ice applications please make sure condensing coil is free of any water/moisture as it will freeze and restrict/block flow when submerged in dry ice. To clear the condensing coil blow pressurized air through one of the ports and drain it into a bucket Specifications Small Large X-Large Material 304 Stainless Steel Coil Diameter 6" 9.5" 9.5" Coil Height 5.9" 9.75" 9.75" Coil Length 11' 30' 30' ID 1/4" 1/4" 1/2" Bare Ports 1/4" NPT 1/2" NPT Available Connections: Valves BVV 316SS Full Bore Valves Flares 1/4" - 1/2" 37 Degree JIC Hose Barbs 1/4" - 1/2" Hose Barbs
$125.00 - $230.00
-
Stainless Steel Drum Lid Exhaust 2" Teardrop Flanged Vent Damper Smoke Stack for BBQ Smoker
304 grade stainless steel vent damper for a drum smoker lid. The vent tube has a 2" ID. Height is 4"
$56.00
-
Stainless Steel Extractor Packing Rod for Material *Fits Tri Clamp spools
Stainless Steel Packing Rod for Material Tubes Stainless Steel Extractor Packing Rods for Material Columns are a great addition to any extraction system because they allow the user to compact the plant material tightly into the column allow for more material per extraction and faster overall processing time. These rods come with a plate that matches the size of the inner diameter of the tri-clamp column utilizing a gasket for a tight fit. The rod is able to be extended with extra 24" sections that can also be purchased separately. Specifications: Plate and Rod Material: 304 Stainless Steel Gasket Flange Material: Viton
$55.00 - $380.00
-
Stainless Steel Female Elbow
Female Elbow BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are NPT threads (National Pipe Taper) and will compress against other Female/Male NPT threads creating a tighter and tighter connection. All NPT threads require thread sealant to create a watertight and gas-tight seal between the threads. We recommend using Yellow Gas PTFE Tape because it is rated for gases and is UL listed and it is NOT recommended to use white PTFE tape because it is not rated for gas service. Three sizes available: 1/4, 3/8, and 1/2 inch. BVV™ SS Female Elbow - Data Sheet Specifications Material 304 Stainless Steel Connection Type(s): 1/4"-18 FNPT 3/8"-18 FNPT 1/2"-14 FNPT Sizes Available: 1/4" 3/8" 1/2"
$12.00 - $33.00
-
Stainless Steel Filters - 25 Micron (25μm) - 5ct - Cut to Size
25μm Stainless Steel Filter Tube 5Pk 1" Diameter x 9" Length
$20.00 $15.00
-
Stainless Steel Hang-On Bracket for BVV™ Extraction Racks
Stainless Steel Hang-On Bracket for BVV™ Extraction Racks This heavy duty Stainless steel Hang-On bracket is designed for easy removal of material columns. They are made out of 1/4" thick stainless steel and can fit on either a 1.5" extraction rack bar if needed and include (2) Flathead Hex screws and Nylon lock nuts. (8020 bolts are sold separately.)
$25.00
-
Swagelok Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting
Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting Overview Straight Pattern, High-Flow Make fine adjustments in low- or high- pressure, and low-, medium-, or high- flow applications with Swagelok metering valves that deliver accurate flow control when it matters in situations such as analytical or research applications. Safe Product Selection The complete catalog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Warning: Do not mix/interchange Swagelok products or components not governed by industrial design standards, including Swagelok tube fitting end connections, with those of other manufacturers. Specifications: BODY MATERIAL -316 Stainless Steel CONNECTION 1 SIZE - 3/8 in. CONNECTION 1 TYPE - Swagelok® Tube Fitting CONNECTION 2 SIZE - 3/8 in. CONNECTION 2 TYPE - Swagelok® Tube Fitting CLEANING PROCESS - Standard Cleaning and Packaging (SC-10) MAXIMUM TEMPERATURE °F (°C) - 400 (204) MINIMUM TEMPERATURE °F (°C) - -10 (-23) CV MAXIMUM - 0.15 Handle Style - Knurled
$220.00
-
Stainless Steel Injection Coil - Tall
Stainless Steel Injection Coil - Tall The BVV Stainless Steel Injection Coil- Tall allows the user to chill solvent with dry ice and does not have 90 degree bends to slow down the speed of the fluid passing through the coil. The extended top allows the user to completely submerge the coil while preventing the dry ice and alcohol slurry from splashing out of the pot. This coil comes standard with 1/2" NPT ports that will not restrict flow of solvent through the coil. Specifications: Weight: 26LB Chamber OD: 10" Depth: 16" Connection Sizes: Bare 1/2" FNPT ports w/ Drain Plug, JIC or Barb fittings available Material: 304 Stainless Steel
$295.00 - $300.00
-
Stainless Steel KF-25 x Glass Jointed Adapter
Stainless Steel KF-25 x Glass Jointed Adapter This Custom Built 304 Stainless Steel Adapter allows the user to adapt to a KF-25 high vacuum fitting to a 24/40 or 34/45 ground glass joint fitting to allow the user to connect a KF flanged laboratory grade vacuum pump.
$55.00 - $60.00
-
Stainless Steel Laboratory Scissor Jacks
Stainless Steel Scissor Jacks Adjustable height laboratory scissor jack. The platform is 4"/6"/8" & the durable 304 stainless steel heavy-duty lab lifts with very little effort necessary! Specifications: 304 Stainless Steel Platform size: 4" x 4" / 6" x 6" / 8" x 8"
$34.00 - $54.00
-
Stainless Steel LP Tank - Includes Gas and Liquid Fill/Drain Ports
Stainless Steel LP Tank - Includes Gas and Liquid Fill/Drain Ports Stainless Steel LP tanks offer a superior way to decrease contamination of solvent and feature a tri-clamp lid with a high-pressure clamp. This allows easy access to the inside of the tank, making cleanout simple, unlike a normal carbon steel LP tanks. Tanks feature a safety collar to prevent damage to the valves, as well as a welded ring on the bottom to prevent damage to the tank body and allow better circulation of fluid around the entire tank. Lids come configured with 2 valves and compound gauge and polycarbonate sight glass on the larger #50 and #100 tanks. These tanks come with BVV 1/4" FNPT valves and 1/4" 37 Degree JIC Flares with one port being connected to a dip tube. ***Note: Tank comes empty and does not include solvent. Butane Capacity Calculation: All solvent tanks sold by Best Value Vacs have their capacity determined by this calculation and are based on industry-standard nomenclature of the water weight tank # system because the specific gravity of water is 1.000 and the DOT 80% fill guideline. Example: 100# Tank = ~100lbs of water weight, Halfton Tank = 1000lbs of water weight. Specifications Tank # Water Weight in Lbs Specific Gravity of Butane 0.601 80% Fill Guideline 0.800 (Tank #) * (Specific Gravity of Butane) * ( 80% Fill Guildine) Sizes Available: 30# 50# - 1.5" Tri-Clamp ferrule with sight glass 100# - 1.5" Tri-Clamp ferrule with sight glass Specifications Tank/Component Material 304 Stainless Steel Gasket Material BUNA-N Sight Glass Material (50# and 100# Only) Polycarbonate Standard 3A High Polish Connection Type(s) 1/4" (7/16-20) x 37° JIC Lid Connection Type(s): Tri-Clamp 1/4"-20 FNPT Butane Capacity: 30# 14.424 50# 24.040 100# 48.080 ***Disclaimer: These are not DOT rated tanks and are not recommended for transportation when filled.
$475.00 - $830.00
-
Stainless Steel Packing Plate
Stainless Steel Packing Plate Replacements for Packing Plate Stainless Steel Rods
$20.00 - $160.00
-
The Press Club STAINLESS STEEL SCREENS
While nylon bags have been the gold-standard for pressing solventless concentrates for years now, stainless steel screens have been gaining popularity recently. For the past year, we've been experimenting with stainless steel screens in our solventless lab to see how it compares to nylon and we have some interesting key learnings to share. With stainless steel, we were able to press 25% more per square inch (saving both time & money) and improve bag traction by 65% to reduce slippages when working with greasier strains. Curious what else we learned? Read our latest blog post on stainless steel screens and see our step by step video tutorial on how to use them HERE. Now we're making our stainless steel screens available to everyone in the community! Puck, wrap and press your hash or sift with our 100% food-grade, 316L stainless steel mesh screens. 25 Micron | 16" x 16" Inch (Length x Width) Easily Cut to Required Size / Wrap / Press 100% Food-Grade Premium 316L Stainless Steel Available in 5-Pack / 10-Pack / 20-Pack Made In USA ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$99.95 - $299.95
-
Stainless Steel Tri-Clamp Hopper
The Triclamp / Tri Clover hopper can be attached to a material column to assist in packing the column with material. The Hopper has no tri clamp ferrule on the larger end and is made out of sanitary 304 stainless steel.
$155.00 - $185.00
-
Stainless Steel Tri-Clamp x Female Joint Adapter
This unique adapter allows the user to adapt a Tri-Clamp fitting to a male ground joint glass fitting and it is made out of 304 stainless steel.
$42.00
-
Stainless Tri-Clamp Weldless Bulkhead
Stainless Tri-Clamp Weldless Bulkhead This tri clamp bulkhead or panel mount can be mounted through a vessel wall such as vacuum chamber or tank. It has a silicone or buna-n tri clamp gasket that is placed on the outside of the chamber or vessel. It is capable of holding vacuum, and can also withstand positive pressure 8-10 psi is expected but depending on the installation geometries and material you can expect some higher pressures than that. It will be able to hold vacuum, but not high positive pressure. For best vacuum results, vacuum greases is recommended on the sealing surface of the panel/lid or vessel wall. Max wall thickness: .875" Hole Size: TCPM150- 1.3-1.4" TCPM200- 1.9-2.0" Thread Size: TCPM150- 1" NPS TCPM200- 1.5" NPS
$45.00 - $55.00
-
CPS Products Standard CPS Piston Connecting Rod Assembly for TRS21 / TR21 (TR21x3 Kit)
CPS Standard Connecting Rod Assembly TR21X3 Piston Rebuild Kit TRS21 Oil-less Compressor Connecting Rod With Bearings (2) CPS manufactured rebuild kit for TRS21 recovery pump piston heads. This kit is compatible with the following CPS pumps: TRS 21 Recovery Pump TRS 19 Recovery Pump TRS 600 Recovery Pump
$185.00
-
Standard Glycerin Filled Vacuum Gauge 1/4" NPT BASE
Standard Glycerin Filled Vacuum Gauge 0-(-30) in Hg with a 1/4" Stainless Steel NPT BASE
$32.00
-
Chemglass STIR BARS, MAGNETIC, PTFE, EGG-SHAPED
Egg-shaped magnetic stirring bar provides its own pivot point without separate ring or abrupt change in contour. Designed for use in round bottom vessels, it is shaped to spin freely, unrestricted by the vessel contour. Manufactured with FDA-grade and USP Class VI PTFE. Stir Bar, Magnetic, Egg-shaped, fits 12000mL-22000mL flask, Length x Dia. in inches: 3 x 3/4
$48.00
-
STM Canna STM Atomic Closer 2.0
STM Atomic Closer The only modular pre-roll closing machine on the market designed to incorporate human touch for true premium quality look and feel. Boasting an ultra compact footprint, this one-of-a-kind system can operate on a tabletop in facilities of all sizes, eliminating the industry's #1 pre-roll bottleneck. Features Compatible with RocketBox and Mini-RocketBox. Tamps & Folds Ends into Beautiful, Consistent Crown. Fastest in the Industry at 72 joints every +/- 40 seconds Daily Capacity of 41,000 +/- Pre-Rolls Easy to Clean and Maintain HMI Touch Screen Control Emergency Stop Switch & Reset Button Adaptable to Future Weighing Machine & Packaging Add-Ons Orders are expected to begin shipping in February 2022. Renowned Training & Support Dedicated STM Client Services Team Exclusive Client Portal with Library of Training Videos and Information STM Atomic Closer Brochure PDF Atomic Closer Technical Specifications PDF Atomic Closer User Manual PDF
$59,995.00
-
STM Canna STM LaunchPad Weighing Module
STM LaunchPad Weighing Module The First & Only Modular, Commercial Pre-Roll Scale The LaunchPad Weigher is the first and only modular, commercial pre-roll scale which weighs 72-rolls at once and in seconds. The LaunchPad functions as a stand alone machine or better as part of STM Canna’s complete pre-roll workflow system. 72 Rolls Weighed Simultaneously The LaunchPad commercial scale gives your staff the ability to view the weight of each individual pre-roll and identify rejects in an instant with a color-coded display, dramatically increasing production speed and output With this new innovative module, your operation will greatly benefit from reduced labor hours, the ability to maintain precise quality control over the weight of your pre-rolls and maximize profits attributed to under or over filling. Customizable Parameters Target Weight Paper weight % Tolerance View of Min. & Max. Weight by Grams Renowned Service & Support 1-Year Parts & Labor Warranty Dedicated STM Client Services Team Exclusive Client Portal with Library of Training Videos and Information Launchpad User Manual Launchpad Technical Specifications Launchpad Brochure
$42,995.00
-
STM Canna STM Mini-Revolution
STM Mini-Revolution Designed specifically for flower, the Mini-Revolution delivers a homogenous, consistent grind, optimal for evenly packed pre-rolls and extraction. Features Variable Speed Control (low, medium, and high) Interchangeable Fine & Coarse Blades Cuts Flower Versus Extruding, Smearing, Pressing, or Whipping Less Terpene Loss Than Competitors Homogenous & Consistent Flower Particles Keeps Stems & Seeds Intact For Easy Post-Sifting Designed, Manufactured & Assembled in the USA Durable, Built for Commercial Use Food-Grade Stainless Steel Construction Quiet Operation OSHA Compliant; Equipped with Safety Switch Very Easy to Clean Tabletop Unit, Ergonomic for Small Production Spaces Renowned Training & Support Dedicated STM Client Services Team Exclusive Client Portal with Library of Training Videos and Information Includes Fine Blade Disc Coarse Blase Disc Collection Bin Mini Revolution Brochure Mini Revolution Comparison Chart Mini Revolution Electrical Schematic Mini Revolution Technical Specifications Mini Revolution User Manual
$6,600.00
-
STM Canna STM Mini-RocketBox PLUS+
STM Mini-RocketBox PLUS+ The STM Mini-RocketBox PLUS+ pre-roll machine combines power, efficiency, and versatility to maximize your pre-roll production. Capable of producing 143 pre-rolled cones in under a minute, this machine is perfect for startups on a budget. Features 143 Pre-Rolls in 45 Seconds (4x faster than competitors) Compatible with 84 (.5g), 98 (.7g) and 109 (1g) MM Cones Variable Frequencies of Vibrations for Even Filling & Packing Adjustable Top Tray for Adjusting Height of Fill Lift Plate to Ensure Cones Sit Flush with One Another Fully Adjustable Dial for Desired Tightness & Pack Reduces Tedious Manual Labor Durable Stainless Steel for Commercial & Industrial Use Evenly Fills Cones Layer-by-Layer for Optimal Smokability OSHA Compliant What's Included 1 x STM Mini-RocketBox Pre-Roll Machine 1 x Bottom Tray (in size of choice) 1 x Adjustable Top Tray 1 x Loading Box 1 x Finishing Base 1 x 12-Month Parts and Labor Warranty Renowned Training & Support Dedicated STM Client Services Team Exclusive Client Portal with Library of Training Videos and Information Mini-RocketBox PLUS+ User Manual Mini-RocketBox PLUS+ Technical Specifcations Mini-RocketBox PLUS+ Get Started Mini-RocketBox PLUS+ Brochure Mini-RocketBox PLUS+ Comparison Chart
$6,600.00
-
STM Canna STM Revolution 2.0
STM Revolution 2.0 Designed specifically for flower, the Revolution 2.0 delivers a homogenous, consistent grind, optimal for evenly packed pre-rolls and high-yield extraction. No plastic whips, meat grinders, blenders or flour mills that heat and pulvarize months of your hard work. Chosen by small craft cultivators and start-ups up to the largest brands and facilities around the world, the STM Revolution 2.0 is an asset that grows with your business, allowing your facility to scale as needed and maintain the highest product integrity (retaining your trichomes & terpenes). Features 15-30 LBS Per Hour of Dry Flower Interchangeable Fine & Coarse Particle Screens for Extraction & Pre-Rolls Minimizes Terpene Loss Self-Regulating, Closed-Loop System to Prevent Clogs Auto-Blade Oscillation Creating Scissor-Like Cuts Auger Timing & Blade Speed Control 7%-10% Optimal Moisture Content Consistent and Repeatable Results What's Included Dual Blade System Fine Partical Screen Coarse Particle Screen Cut-Proof Safety Glovews Renowned Training & Support Dedicated STM Client Services Team Exclusive Client Portal with Library of Training Videos and Information Revolution Get Started Revolution User Manual Revolution Comparison Chart Revolution Brochure Revolution Technical Specifications
$22,950.00
-
STM Canna STM RocketBox 2.0
STM RocketBox 2.0 The STM Canna Rocketbox 2.0 is the world’s most advanced commercial pre-roll machine, producing over 453 pre-rolled cones in a 60-second cycle. Designed to maximize pre-rolled joint production while significantly decreasing labor costs, the RocketBox 2.0 is the pinnacle of pre-rolled cone machines. Features 453 Pre-Rolled Joints in 60 Seconds Compatible with 84, 98 and 109 MM Cones Proprietary Smart Density Software to Measure & Achieve Weight Accuracy Variable Frequencies of Vibrations for Even Filling & Packing Built-In Training Mode with Tutorials Adjustable Top Tray for Adjusting Height of Fill Lift Plate to Ensure Cones Sit Flush with One Another Precise, Consistent and Repeatable Results Benefits 6x to 7x's Faster, Decreases Labor for All Size Operations Durable for Long-Term Commercial Use Easy On-Boarding and/or Training After Turnover Density Calculator for Scientifically Accurate Weights Up to 25,000 Joints Daily (grow, scale & co-pack) Attachment-Capable (Sifter Launching 2021) Renowned Training & Support Dedicated STM Client Services Team Exclusive Client Portal with Library of Training Videos and Information What's Included 1 x STM RocketBox 2.0 Pre-Roll Machine 1 x Bottom Tray (in size of choice) 1 x Adjustable Top Tray 1 x Loading Box 1 x Finishing Base 1 x Density Testing Beaker 1 x 12-Month Parts and Labor Warranty RocketBox Comparison Chart RocketBox User Manual RocketBox Brochure RocketBox Technical Specifications
$24,950.00
-
Straight GL-14 Barb
Straight GL14 Barb Straight GL14 Barb connection Specifications: 8MM GL14 Female Connection Straight Style
$9.00
-
Straight Inlet Adapter with Hose Barb
Straight Inlet Adapter with Hose Barb This straight inlet adapter allows the user to connect a male and female 24/40 jointed connection and attached a flexible hose for vacuum if needed. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$30.00
-
SSP Corporation Street Elbow
SSP - Street Elbow SSP Instrumentation TruFit® is manufactured from fully-traceable raw material to close tolerances and superior surface finishes. TruFit® provides optimal performance when installed in accordance with SSP’s recommendations and the design parameters appropriate for each type of connection – tapered thread, straight thread, and weld & braze. TruFit® components are cleaned in accordance with SSP documented work instructions using equipment calibrated to NIST standards with environmentally-safe and stable agents, ultrasonics, and heat/ temperature to remove all residual oil, grease, and loose particles. Stainless steel components are passivated to the requirements of MIL QQ-P-35 and ASTM A 967. ***Note: ALL NPT Threads REQUIRE the user to properly install the fitting by using a thread sealant to prevent leaks. Best Value Vacs recommends GAS PTFE Tape Specifications Connection Type 1 Female x Male NPT Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) 1/4" - 7750 3/8" - 6800 NPT Pressure Rating >10,000PSI ASME B31.3 SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$16.00 $11.00
-
Street Elbow
BVV Street Elbow BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are NPT threads (National Pipe Taper) and will compress against other Female/Male NPT threads creating a tighter and tighter connection. All NPT threads require thread sealant to create a watertight and gas-tight seal between the threads. We recommend using Yellow Gas PTFE Tape because it is rated for gases and is UL listed and it is NOT recommended to use white PTFE tape because it is not rated for gas service. **NOTE: Pre-Taped option comes from BVV Pre-taped with Yellow UL Listed Gas PTFE Tape on the Male NPT threads ONLY for a +0.50c charge per male npt end. (JIC Threads DO NOT need to be taped.) Street Elbows are unique because they offer the 90 Degree transition, but they also offer a Male NPT connection along with a Female NPT connection and because of this they can reduce the amount of fittings used in a system which in turn will reduce leak points in the system overall.BVV™ Street Elbow - Data Sheet Specifications Material 304 Stainless Steel Connection Type(s): 1/4"-18 FNPT 1/4"-18 MNPT 3/8"-18 FNPT 3/8"-18 MNPT Sizes Available: 1/4" 3/8" FNPT x 1/4" MNPT 3/8"
$12.00 - $38.00
-
SSP Corporation Street Tee
SSP - Street Tee SSP Instrumentation TruFit® is manufactured from fully-traceable raw material to close tolerances and superior surface finishes. TruFit® provides optimal performance when installed in accordance with SSP’s recommendations and the design parameters appropriate for each type of connection – tapered thread, straight thread, and weld & braze. TruFit® components are cleaned in accordance with SSP documented work instructions using equipment calibrated to NIST standards with environmentally-safe and stable agents, ultrasonics, and heat/ temperature to remove all residual oil, grease, and loose particles. Stainless steel components are passivated to the requirements of MIL QQ-P-35 and ASTM A 967. ***Note: ALL NPT Threads REQUIRE the user to properly install the fitting by using a thread sealant to prevent leaks. Best Value Vacs recommends GAS PTFE Tape Specifications Connection Type 1 Female NPT Connection Size 1 Specified by User Connection Type 2 Female NPT Connection Size 2 Specified by User Connection Type 3 Male NPT Connection Size 3 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) 1/4" - 7750 3/8" - 6800 NPT Pressure Rating >10,000PSI ASME B31.3 SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$30.00 $15.00
-
Sulfuric Acid 93% Technical / PC Grade
Our Sulfuric Acid 93% Technical Grade also conforms to PC (Printed Circuit Board) grade, because it conforms to high purity standards that can be verified on the certificate of analysis which makes this higher quality than industrial grades and contains less contaminates like iron and chloride making it suitable for use in manufacturing PC components. Sulfuric Acid is also know as Battery Acid or Oil of Vitriol. This higher purity sulfuric acid 93% would work for replacing the acid in batteries. This can be done but sulfuric acid is very dangerous to handle. To make battery acid solution to revive a battery you would take 4 liters of reverse osmosis deionized water (BVV Ultrapure Water) to 1 liter of sulfuric acid 93%. Mix and let cool. You will have 1250 gravity battery acid. This refers to the specific gravity now being 1.250 and this is most commonly used for battery electrolyte for lead-acid batteries. Sulfuric Acid Tech (Conforms to PC Grade) Safety Data Sheet (SDS) Sulfuric Acid Tech (Conforms to PC Grade) Certificate of Analysis (COA)
$26.00 - $895.00
-
Superfine Agar Powder for Mushrooms Mycology Petri Dishes
Superfine Agar Powder Bacteriological, Food Grade, USP-NF Our Agar Powder is extracted from Red Seaweed. Our agar is a complex polysaccharide and is a top choice for mycology cultures. This superfine agar dissolves quickly and has a high gel strength making it an excellent choice for a variety of applications an petri dishes. Gel Strength (1.5%) : 1020 gm/cm² Gel Temperature: 38-40°C (100-104°F) CAS# 9002-18-0 Gluten Free Allergen Free Vegan & Vegetarian approved Non-GMO Shelf Life: 2 years pH: 5.5-8.5 Superfine Agar Powder Certificate of Analysis Directions for Use: Mix 10g of superfine agar powder per 500ml of distilled water. Boil and stir until powder is fully dissolved. Sterilize the mixture for 45min @15psi 250°F (121°C) in a pressure cooker or autoclave. Allow mixture to cool to approximately 140°F (60°C) *To avoid excessive condensation. Fill dishes with 15ml of mixture, approximately ~30-35 dishes.
$21.00 - $150.00
-
Swivel Bosshead
This swivel boss head is made out of die-cast alloy is nickel plated and will fit rod diameters up to 16mm. The boss head can be adjusted and locked to any angle (360°). It is also designed to carry heavy loads and prevent torque damage. Note:Clamps and rods are NOT included.
$11.00
-
Syloid 244 FP Food & Pharma Hydrated Silica
Syloid®244 FP Food & Pharma Grade (FP) Hydrated silica. SYLOID® 244FP Silica acts as an emulsion stabilizer, mattifying agent, exfoliant, pigment dispersion, carrier and thickener. Enhances skin-feel and film consistency. It has a high level of internal porosity, high bulking value, high purity and significant capacity for oil-and moisture absorption. Provides compaction aid, mattifying /gloss control, silky skin feel, non-greasy or dry feel and residual film uniformity on skin. SYLOID® 244FP Silica is used in in decorative cosmetics/make-up products, hair care products, high-sun protection factor (SPF) formulations comprised of a water-in-oil emulsion, toiletries and pigmented cover creams. It is registered in REACH and listed in CTFA. SYLOID® 244FP silica is a veritable multipurpose excipient. It offers moisture protection and anti-tacking properties, acts as a glidant, and can be used as a suspension aid in tablet coatings. Physical Properties: Ultra white fine powder. 500g Jar is a 1.8 gallon size container and its nearly filled Ultra Lightweight silica that falls like snow. SYLOID 244FP Technical Data Sheet TDS SYLOID 244FP Safety Data Sheet SDS
$42.40 - $388.00
You have seen 1536 out of 1732 products