Products
-
Across International Ai 316L SST Optional 250C UL Certified 7.5 CF Vacuum Oven With 5 Heating Shelves
Ai 316L SST Optional 250C UL Certified 7.5 CF Vacuum Oven With 5 Heating Shelves Introducing the new UL certified 5-shelf 7.5 cu ft vacuum ovens, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Also come standard is thesecondary over-temp protection dial, stainless steel tubing, stainless steel vacuum & vent valve, oil-filled vacuum gauge, and two year warranty. With our new internal shelf heating technology, each shelf in these lab ovens has its own heater, in-shelf temperature sensor and temperature controller, together with great thermal-conductive aluminum and our new low proportional controller technologies, the result is perfect uniformity, accurate temperature, super-fast heating rates, minimum heat loss/exterior temperature and very low power consumption. UL certified New KF25 inlet filter keeps your oven clean at all time (included with oven purchase). All stainless steel internal tubing provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance. Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage. All stainless steel vacuum and vent valves gives you cleaner connection, more accurate control and long term durability. Five aluminum heating shelves with individual in-shelf temperature sensor, heater and digital temperature controller. 4th gen low proportional gain temperature controllerskeep your oven temperature accurate. Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time. Dual layer observation window with 3/4" tempered safety glass. 3" thermal insulation prevents heat loss and minimizes the enclosure's outer surface temperature. Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance. A vacuum environment lowers the boiling point (great for processing heat sensitive materials) and reduces drying time for materials like paste or powder which cannot otherwise be easily dried. Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature. Built-in swivel casters with leveling feet. For improved temperature ramping, run the auto-tune procedure as outlined in the manual Manufactured in accordance with UL 61010-1 CSA C22.2 ISO 9001:2000 ISO 12100-1:2003, ISO 12100-2:2003 EN1050:1996, EN294:1992, EN60204-1:2006 CE
$8,990.00 - $9,909.00
-
Across International Ai 500C Max. 1.9 Cu Ft Vacuum Oven With Stainless Steel Tubing And 316L Chamber
Ai 500C Max. 1.9 Cu Ft Vacuum Oven With Stainless Steel Tubing And 316L Chamber AT19-500C series digital desktop 500C vacuum ovens feature a 1.9 cubic foot easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These ovens for labs can greatly reduce drying time by maintaining a consistent vacuum level within the chamber. Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is 100% quality controlled in New Jersey or Nevada before leaving our facilities. Features All stainless steel internal tubing & compression fittings provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance. Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage. All stainless steel vacuum and vent valves gives you cleaner connection, more accurate control and long term durability. New 5 sided heating technology and aluminum shelves provide excellent temperature uniformity and faster heating rates (25% faster in our lab test). Adjustable gas back fill capability with needle valve and vent port. 3" thermal insulation prevents heat loss and minimizes the enclosures outer surface temperature. Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance. Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.
$5,390.00 - $10,530.00
-
Across International Ai DigiM 10L 300C 1200 RPM Digital Heating & Stirring Mantle
Ai DigiM 10L 300C 1200 RPM Digital Heating & Stirring Mantle Across International heating and stirring mantles come standard with a digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds.The DigiM mantle has two sets of thermocouples for proper temperature and speed detection. The heating jacket is pre-treated before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment. Model DigiM10 Electrical requirements 110V 60Hz 1-Phase, 2050 watts, 24A or 220V 50/60Hz 1-Phase, 2050 watts, 12A Heating Ambient to 300°C Stirring Min. speed: 110 rpm, max. speed: 1200 rpm Motor power: 40 watts Motor type: brushless DC motor Controller PID control with digital temperature and rotation speed display External thermocouple Type: PT100 Cable length: 43 inches Stainless steel probe length: 15 inches Stainless steel probe diameter: 5 mm Flask holder Maximum flask capacity: 10 liters Top opening diameter: 11.75 inches Depth: 6.5 inches Dimensions (WxDxH) Unit: 18 x 17.5 x 13 inches, shipping: 22 x 21 x 18 inches Weight Unit: 30 lbs, shipping: 40 lbs Safety Thermocouple failure protection Certification ETL tested to UL and CSA standards (optional), CE (standard) Warranty One year Standard package Part description Quantity Part image Ai DigiM 10L digital heating & stirring mantle 1 pc External temperature probeDigiM05, DigiM2, DigiM5: Cable Length: 40”, Probe Length: 9” DigiM10, DigiM20: Cable Length: 43”, Probe Length: 15” 1 pc Internal temperature plug 1 pc Boss head DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs Stainless steel support rod DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs PTFE-coated stir bar 2 pcs PTFE-coated magnetic stir bar remover 1 pc 4 prong stainless steel clamp opens to 3 1/2" DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs User's manual 1 pc
$1,190.00 - $1,990.00
-
Across International Ai DigiM 20L 300C 1200 RPM Heating & Stirring Mantle - 220V
Ai DigiM 20L 300C 1200 RPM Heating & Stirring Mantle - 220V Across International heating and stirring mantles come standard with digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds.The DigiM mantle is equipped with two sets of thermocouples for proper temperature and speed detection. The heating jacket is pre-treated before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment. Model DigiM20 Electrical requirements 220V 50/60Hz 1-Phase, 2900 watts, 13.2 A Heating Ambient to 300°C Stirring Min. speed: 110 rpm, max. speed: 1200 rpm Motor power: 40 watts Motor type: brushless DC motor Controller PID control with digital temperature and rotation speed display External thermocouple Type: PT100 Cable length: 43 inches Stainless steel probe length: 15 inches Stainless steel probe diameter: 5 mm Flask holder Maximum flask capacity: 20 liters Top opening diameter: 14.5 inches Depth: 7.5 inches Dimensions (WxDxH) Unit: 20.5 x 20.5 x 13 inches, shipping: 24 x 24 x 18 inches Weight Unit: 40 lbs, shipping: 50 lbs Safety Thermocouple failure protection Certification ETL tested to UL and CSA standards (optional), CE (standard) Warranty One year Standard package Part description Quantity Part image Ai DigiM 20L digital heating & stirring mantle 1 pc DigiM20: Cable Length: 43”, Probe Length: 15” 1 pc Internal temperature plug 1 pc Boss head DigiM20: 2 pcs 2 pcs Stainless steel support rod DigiM20: 2 pcs 2 pcs PTFE coated stir bar 2 pcs PTFE coated magnetic stir bar remover 1 pc 4 prong stainless steel clamp opens to 3 1/2" DigiM20: 2 pcs 2 pcs User's manual 1 pc
$1,590.00 - $2,140.00
-
Across International Ai DigiM 2L 300C 1200 RPM PID Controlled Digital Heating Mantle
Ai DigiM 2L 300C 1200 RPM PID Controlled Digital Heating Mantle Across International heating and stirring mantles come standard with a digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds. The DigiM mantle has two sets of thermocouples for proper temperature and speed detection. The heating jacket is pre-treated before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment. Model DigiM2 Electrical requirements 110V 60Hz 1-Phase, 700 watts, 8A or 220V 50/60Hz 1-Phase, 700 watts, 4A Heating Ambient to 300°C Stirring Min. speed: 110 rpm, max. speed: 1200 rpm Motor power: 40 watts Motor type: brushless DC motor Controller PID control with digital temperature and rotation speed display External thermocouple Type: PT100 Cable length: 40 inches Stainless steel probe length: 9 inches Stainless steel probe diameter: 5 mm Flask holder Maximum flask capacity: 2 liters Top opening diameter: 6.5 inches Depth: 4 inches Dimensions (WxDxH) Unit: 11 x 16 x 8.5 inches, shipping: 20 x 14 x 13 inches Weight Unit: 14 lbs, shipping: 25 lbs Safety Thermocouple failure protection Certification ETL tested to UL and CSA standards (optional), CE (standard) Warranty One year Standard package Part description Quantity Part image Ai DigiM 2L heating mantle 1 set External temperature probeDigiM05, DigiM2, DigiM5: Cable Length: 40", Probe Length: 9" DigiM10, DigiM20: Cable Length: 43", Probe Length: 15" 1 pc Internal temperature plug 1 pc Boss head DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs Stainless steel support rod DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs PTFE-coated stir bar 2 pcs PTFE-coated magnetic stir bar remover 1 pc 4 prong stainless steel clamp opens to 3 1/2" DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs User's manual 1 pc
$690.00 - $890.00
-
Across International Ai DigiM 5L 300C 1200 RPM PID Controlled Digital Heating Mantle
Ai DigiM 5L 300C 1200 RPM PID Controlled Digital Heating Mantle Across International heating and stirring mantles come standard with a digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds.The DigiM mantle has two sets of thermocouples for proper temperature and speed detection. The heating jacket is pre-treated before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment. Specifications Model DigiM5 Electrical requirements 110V 60Hz 1-Phase, 1100 watts, 12A or 220V 50/60Hz 1-Phase, 1100 watts, 6A Heating Ambient to 300°C Stirring Min. speed: 110 rpm, max. speed: 1200 rpm Motor power: 40 watts Motor type: brushless DC motor Controller PID control with digital temperature and rotation speed display External thermocouple Type: PT100 Cable length: 43 inches Stainless steel probe length: 15 inches Stainless steel probe diameter: 5 mm Flask holder Maximum flask capacity: 5 liters Top opening diameter: 9 inches Depth: 5.5 inches Dimensions (WxDxH) Unit: 13.5 x 17 x 10 inches, shipping: 20 x 16 x 15 inches Weight Unit: 22 lbs, shipping: 32 lbs Safety Thermocouple failure protection Certification ETL tested to UL and CSA standards (optional), CE (standard) Warranty One year Standard package Part description Quantity Part image Ai DigiM 5L digital heating & stirring mantle 1 set External temperature probeDigiM05, DigiM2, DigiM5: Cable Length: 40”, Probe Length: 9” DigiM10, DigiM20: Cable Length: 43”, Probe Length: 15” 1 pc Internal temperature plug 1 pc Boss head DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs Stainless steel support rod DigiM2, DigiM5:- 1 pc DigiM10 and DigiM20: 2 pcs 1 or 2 pcs PTFE coated stir bar 2 pcs PTFE coated magnetic stir bar remover 1 pc 4 prong stainless steel clamp opens to 3 1/2" DigiM2, DigiM5:- 1 pc DigiM10, and DigiM20: 2 pcs 1 or 2 pcs User's manual 1 pc
$990.00 - $1,340.00
-
Across International Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE
Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE Vac 9 CFM vacuum pumps are now 110V/220V 50/60Hz switchable and ETL and CE certified. Ai EV9 are dual-stage high speed sliding-vane rotary compact vacuum pump with KF25 vacuum connector. Comes with all necessary fittings and a exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. It is important to note that pumps should always be ran in a well ventilated area. Free KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included.
$790.00
-
Across International Ai Food Grade Solvent-Resist Viton Door Gasket For Ai Vacuum Ovens
Ai Food Grade Solvent-Resist Viton Door Gasket For Ai Vacuum Ovens One-piece, food-grade Viton door sealing gasket, specially made for Ai AT series vacuum ovens, is good for sealing and maintaining vacuum level within the oven chamber. The maximum temperature on the Viton gasket is 150 Celsius (302 Fahrenheit) Viton gaskets are highly impermeable to many strong organic solvents that would destroy or permeate commonly used gaskets. AT Series Viton Dims (LxW) – Inches AT09/AT09e 14 x 13” AT19/AT19e 19 x 15 1/2” AT32/AT32e 19 3/4 x 19 3/4” AT50e/AT50x 21 1/4 x 20 3/4" AT75x/AT75/AT75a 27 1/2 x 24 x 1/8” AT160/AT160x 37 1/4 x 27 3/8”
$199.00 - $659.00
-
Across International Ai Glass Reactor Ai 10L Single Or Dual Jacketed Systems
Ai Glass Reactor Ai 10L Single Or Dual Jacketed Systems Ai R-series single/dual jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed. Features ETL tested to UL and CSA standards (optional) Now includes a FREE high quality thermo insulation jacket (a $399 value) with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill. Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material. Solvent-resistant PTFE on all sealing components ensures long time durability and operation. All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant. Adjustable stirring rate provides great torque or high speed. Patented PTFE stirring rod bearing for reliable and quiet operation. Optional multi-layer stirring blades for optimal reaction results. Wide range of temperature operations, from -110F to 400F. Large condenser cooling surface for exceptional condensation performance. Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials. Easily visual operation with digital speed and temperature displays. Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)
$5,490.00 - $7,490.00
-
Across International Ai Glass Reactor Ai 2L Single Jacketed - 115V/230V Compatible
Ai Glass Reactor Ai 2L Single Jacketed - 115V/230V Compatible Introducing the Ai R-series single glass reactors bench top reactors. Both the 2L and 5L reactor vessels can be used on the same frame, allowing for greater flexibility and customizability. Reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed. Features Solvent-resistant PTFE on all sealing components ensures long time durability and operation. All glassware is hand-made from food grade high borosilicate glass that is corrosion-resistant. Adjustable stirring rate provides great torque or high speed. Wide range of temperature operations, from -120C to -200C. Large condenser cooling surface for exceptional condensation performance. Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials. Visual operation with digital speed and temperature displays. Easy swap between 2L and 5L capacity (additional vessel required, not included) One year warranty and US-based parts, service, and support.
$4,990.00 - $6,490.00
-
Across International Ai Glass Reactor Ai 5L Single Jacketed - 115V/230V Compatible
Ai Glass Reactor Ai 5L Single Jacketed - 115V/230V Compatible Introducing the Ai R-series single glass reactors bench top reactors. Both the 2L and 5L reactor vessels can be used on the same frame, allowing for greater flexibility and customizability. Reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed. Features Solvent-resistant PTFE on all sealing components ensures long time durability and operation. All glassware is hand-made from food grade high borosilicate glass that is corrosion-resistant. Adjustable stirring rate provides great torque or high speed. Wide range of temperature operations, from -120C to -200C. Large condenser cooling surface for exceptional condensation performance. Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials. Visual operation with digital speed and temperature displays. Easy swap between 2L and 5L capacity (additional vessel required, not included)
$5,390.00 - $6,490.00
-
Across International AI Modular Cold Trap With Glass Condensers & Dual Receiving Flasks
AI Modular Cold Trap With Glass Condensers & Dual Receiving Flasks Introducing the Across International external condenser. This modular condenser has over 15,000 cm2 of surface area to handle large vapor loads and keep solvents out of your vacuum pump, dual 10L receiving flasks for continuous operation with minimal downtime, and a KF25 connection for easy configuration to just about all types of equipment. Common applications for this condenser include powder drying in the pharmaceutical industry, electrode slurry drying in the battery and energy sector, and any application involving removal of water, ethanol, and other commonly used laboratory solvents.
$8,200.00 - $8,250.00
-
Across International Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps
Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps Across International 500mL glass trap for Ai 2nd Gen T40 -40C cold traps. Upward hose barb ports give you safer and easier vacuum tubing connection and removal. Features Fully openable for easy cleaning Inlet and outlet: 3/8" hose barb Joint type: 45/50 standard taper 2" OD x 15" height Glass material: high borosilicate glass 3.3
$200.00
-
Across International Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps
Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps cross International glass trap for Ai 1st Gen T series -40C and -80C cold traps. Features Fully openable for easy cleaning Inlet and outlet: 3/8" hose barb Joint type: 34/45 standard taper 2" OD x 10" height Glass material: high borosilicate glass 3.3
$120.00
-
Across International Ai Stainless Jackhammer Dual-Layer Vacuum Cold Trap
Ai Stainless Jackhammer Dual-Layer Vacuum Cold Trap In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying. Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the vacuum cavity. Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold. Ai stainless Jackhammer features Dual-layer design gives you 2X condensing areas Jackhammer style connectors allows multiple cold traps to be connected on the same platform (level) Heavy duty lab stand for stability Utilizes dry ice or liquid nitrogen for optimal efficiency Comes with scissor jack for easy collection flask removal Easy to clean all stainless construction Small footprint
$1,690.00 - $1,740.00
-
Across International Ai Stainless Steel Cold Trap Insert For T40-UL Gen 2
Ai Stainless Steel Cold Trap Insert For T40-UL Gen 2 Protecting vacuum systems from unwanted constituents is essential to preserving the integrity and performance of any vacuum system. Utilizing a vacuum/cold trap in between vacuum pump systems and process systems is vital for ensuring the health of your vacuum system. That’s why we’ve created this high-efficiency, stainless steel vacuum/cold trap for a multitude of applications.Features NW/KF25 Inlet and Outlet Connections Tier Mesh Plates – for efficient vapor trapping and reflux retention Widened Internal Vapor Outlet – to prevent clogging/freezing inside vapor inlet tube Silicone Insulating Ring – for insulation and tight fit into mechanical traps Custom fit – for older generation T40 Comes with silicone insulation ring that fits directly into the top portion of the reservoir of T40 & T80 cold traps NW/KF25 inlet and outlet flange ports. This stainless mechanical cold trap insert features NW/KF25 inlet and outlet flange ports for tight, simple seals to vacuum pumps and process systems, along with a high-vacuum flange lid to seal the body and lid portions of the trap. Six stainless steel mesh plates.Internally, the trap features 10 stainless steel mesh plates that are stacked inside to provide sufficient surface area to not only trap vapors that enter the trap but to also provide reflux retention of vapors inside of the trap throughout high-vacuum applications.Fluid-filled channel inside.Additionally, there is a fluid-filled channel inside of the trap that provides additional internal cooling and surface area, as well as a channel for thermocouples inside of mechanical cold traps.Optional silicone insulating ring.The silicone insulating ring (sold separately) creates a tight seal and insulation between the mechanical traps and stainless steel insert. The stainless steel mechanical cold trap insert may also be used in a dry ice or liquid nitrogen bath. NOTE: Blue silicone seal/insulation ring included in this purchase.The cold traps are for T40-UL models only. NOT COMPATIBLE WITH T40 (T40) or T80 (gen 1)
$1,995.00
-
Across International Ai Standard Silicone Door Sealing Gasket For Ai Vacuum Ovens
Ai Standard Silicone Door Sealing Gasket For Ai Vacuum Ovens Overview Silicone vacuum door sealing gasket for AT series 0.9 to 16 cubic feet vacuum ovens, they are good for sealing and maintaining vacuum level within the oven chamber. AT Series Silicon Dims (L) - Inches AT09/AT09e 21 1/2” AT19/AT19e 27 1/2" AT32/AT32e 31 3/4" AT50e/AT50x 37” AT75/AT75a/AT75x 43 3/4" AT Series Silicon Dims (L x W x Th) - Inches AT160 Gen - 1 37 1/2 x 27 3/8” x 1.366” AT160/AT160x Gen - 2 37 1/2 x 27 3/8” x 1.235” Dimension Tolerance: +/- : 0.07-0.1”
$59.00 - $250.00
-
Across International Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump
Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump *UL certification NOT available for the 230V model The new Ai SuperVac 11.3 cfm commercial grade vacuum pumps are now UL certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. They are also more powerful (1,100kW vs 750W) and corrosion resistant. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area. SMF-020 Exhaust filter thread size: M24x1.5
$2,590.00 - $2,690.00
-
Across international Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE
Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE * UL certification NOT available for the 220V model The new corrosion resistant Ai SuperVac 21 cfm commercial grade vacuum pumps are now UL certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area. SMF-020 Exhaust filter thread size: M24X1.5
$3,490.00 - $3,590.00
-
Across International Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump
Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump Ai SuperVac-5C 5.6 cfm commercial grade vacuum pump now come standard with UL certified, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Ai SuperVac-5 dual-stage vacuum pump will take your vacuum down to 0.3 micron in minutes. These pumps are designed for reliable long time continuous operation. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Adjustable gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area.
$1,890.00
-
Across International AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE
AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE Across International EasyVac 7 single-stage sliding-vane rotary compact vacuum pump with 3/8" hose barb vacuum connector. Comes with a 3-foot food grade silicone hose and a exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. It is important to note that pumps should always be ran in a well ventilated area. Free three feet 3/8" white premium food grade silicone vacuum tubing (a $19.99 value) included.
$590.00
-
Air Inlet Long Tube Intake Pipe Valve BBQ Drum Smoker DIY Parts Set (2)
Pair of 304 Grade Stainless Steel Air Intake pipes for BBQ Drum Smokers. Intake pipe ID: 1.5" Overall Length is 26 1/4" from top of tube to bottom of radius. Flange with 4 screw holes is 4" diameter
$200.00
-
Alumilite Alumilite Dye
Use Alumilite/Polycolor dyes to add color to your casting resins! Dyes can be used in clear resins for translucent castings, with epoxy for dynamic coatings, or in opaque resin for solid bold colors. Highly concentrated for many, many uses Works in Clear Resins for translucence Bold colors achieve in opaque resins Use smallest amount possible to achieve desired color (up to 5%). Our Alumilite Dyes are highly concentrated. In some instances it's necessary to use less than 1 drop to achieve color in small resin batch. This can be achieved by adding a spec of dye to the tip of a stir stick rather than dispensing into the resin...a little goes a long way! Opaque dyes contain fillers that may settle in the bottle. To maintain consistent color, agitate/stir prior to use. Translucent colors include green*, yellow, red, blue, orange, violet, and ocean blue. ***Note that Green translucent dye is not compatible with epoxy chemistry and will shift to a blue color. This is due in part to chemistry, but also shift in hues (yellowing) over time of epoxy, causing changes in color. *** Opaque colors include white, black, flo red, flo orange, flo yellow, brown, and flo green. Some translucency can be achieved by adding an incredibly small amount of these dyes to clear resin. Disclaimer: Bottle style/label may vary from what is pictured due to mfr. labeling update. Otherwise it is still the same product.
$9.99 $7.00
-
Analog Heating and Stirring Mantle
Analog Heating and Stirring Mantle is used to heat up a glass round bottom flask and stir the contents inside. Heating and stirring functions are analog and sizes range from 500ml to 2000ml. (Mantle's are tested in house and may show slight discoloration on the heating surface.) Certifications: CE Approval Warranties: 500ml - 30 Day Limited Warranty 1000/2000ml - 90 Day Limited Warranty.
$135.00 - $195.00
-
Angled Compression Ball Valve
BVV manually operated two-way ball valves provide quick ¼ turn directional flow control of fluids in instrumentation and process systems. This Valve body has a 90 degree angle to combine the utility of a ball valve and shape of a compression elbow to eliminate extra parts in the system. Features: Directional handle indicates flow direction Panel Mountable 90-degree actuation Straight through flow path Micro-finished ball provides positive seal Free-floating ball design provides compensation for seat wear for repetitive sealing Blow-out proof ball & stem BVV™ Compression Ball Valve - Data Sheet Specifications Body Material 316L Stainless Steel Pressure Rating @ 100F 1000 PSIG Connection Type 1 Double Ferrule Tube Fitting Connection Size 1 Specified by User Connection Type 2 Double Ferrule Tube Fitting Connection Size 2 Specified by User Handle Type Nylon-Stainless Steel Insert Handle Color Black Packing Material PTFE
$145.00 - $192.00
-
Angled GL-14 Barb
Angled GL14 Barb Disclaimer: This item may come in either a Red or Blue color. Angled GL14 Barb Connection. Specifications: 8MM GL14 Female Connection Angled Style
$7.00
-
Apiezon Apiezon AP100 grease. 50g tube
Apiezon AP100 grease Apiezon AP100 vacuum grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely high levels of lubricity and has been shown to provide eight times the level of lubrication offered by standard, petroleum-based lubricating greases. Apiezon AP100 is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon AP100 Grease is a silicone-free ultra high vacuum lubricating grease which: has anti-seize properties, making it an effective protector and lubricant in ultra-high vacuums exhibits extremely high levels of lubricity demonstrates an extremely low vapour pressure of 7 x 10-11 Torr at 20°C is recommended for use at ambient temperatures does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents The unique properties of Apiezon AP100 lubricating vacuum grease mean it is frequently used to protect stepping motors and gearboxes from corrosion and abrasion, particularly when they are subjected to high load conditions. AP100 is also used to prevent seizure in stopcocks, taps and small metal fastenings. The creep resistance of Apiezon AP100 benefits scientific and semiconductor users alike. AP100 helps to increase the accuracy of analytical techniques and improve yields in semiconductor manufacture by contamination avoidance. In addition, AP100 is used for surface coating applications where silicone contamination can lead to poor surface adhesion and incomplete coating defects. To find out more about Apiezon AP100 grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP100 Grease Vapour Pressure Graph MSDS Technical Data Sheet
$290.00
-
Apiezon Apiezon AP101 grease. 50g tube
Apiezon AP101 grease. 50g tube Apiezon AP101 is a silicone-free, excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications. Apiezon AP101 is a specialist, anti-seize vacuum grease, containing PTFE, which confers superior anti-seize properties providing glass and metal surfaces with long-lasting lubrication and protection from fusing and corrosion. Apiezon AP101 is a silicone-free anti-seize vacuum grease which: is ideally suited for use in low to medium vacuum ranges having a vapour pressure of <10-5 Torr at 20°C has anti-seize properties, making it an effective protector and lubricant for metal surfaces which may be subject to seizure or corrosion is a critical lubricant is insoluble in most solvents, is resistant to water, alcohols, ketones and esters resists attack from aqueous acid and alkali solutions, alcoholic alkali solutions and corrosive gases. is suitable for use over a wide temperature range does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents. Apiezon AP101 with its superior anti-seize properties is typically used to maintain the smooth operation of stopcocks and taps in scientific and industrial settings. Coupled with easy separation of ground or polished glass joints AP101 is an excellent general purpose grease for laboratory use. The value of Apiezon AP101 anti-seize properties is not limited to laboratory or glassware use, but is equally effective when used on metal equipment which may be subject to seizure or corrosion. Just a small amount of AP101 on fastenings which, when exposed to corrosive environments would normally jam solid, will ensure they are protected. Apiezon AP101 is an excellent general purpose grease for sealing joints and is ideal for use in critical lubrication conditions such as highly stressed bearings. Being hydrocarbon based, Apiezon AP101 does not suffer from the problems of “creep” or “carry over” which is traditionally associated with silicone greases. It reduces sample contamination and consequently the risk of interference in analytical techniques such as infra-red and mass spectrometry. Additionally AP101 can be used with confidence in paint spraying and metal deposition processes. To find out more about Apiezon AP101 Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP101 Grease Vapour Pressure Graph MSDS Technical Data Sheet
$145.00
-
Apiezon Apiezon H High Temperature Vacuum Grease
Apiezon H High Temperature Vacuum Grease 25g Apiezon H Grease is a silicone-free high vacuum grease perfectly suited for use at high temperatures in both scientific and industrial applications. H Grease has exceptional 'stiction' and thermal conduction properties and has gained prestigious approvals from a variety of international organizations, including BAE Systems, the European Space Agency and NASA. Safety Data Sheet Technical Data Sheet Apiezon H Grease: High Temperature Vacuum Grease Properties Apiezon H Grease is a silicone-free high temperature vacuum grease which: performs well under a wide range of temperatures, from -10 to +240°C, and retains its optimum consistency at temperatures between +10 and +110°C rather than melting, actually becomes stiffer as temperature increases and therefore is not recommended for highly stressed bearings has excellent heat transfer properties conducts heat away from the site of operation, reducing the danger of overheating and damaging heat-sensitive components exhibits good 'stiction' or sticking power has powerful 'gettering' action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents exhibits a vapor pressure of 1.7 x 10-9 Torr at 20°C Please click the links for typical properties and vapour pressure graphs of Apiezon H Grease. Applications of Apiezon H Grease As a high temperature, low to medium vacuum grease with excellent 'stiction' power and good thermal conduction properties Apiezon H Grease is used for many diverse applications. In particular H Grease is commonly used in scientific and industrial high temperature sealing applications.Thanks to its 'stiction' power Apiezon H Grease is ideal for use with laboratory glassware; it is also favoured by the electronics and space industries where its high thermal conductivity makes it the perfect vacuum grease in situations where heat sink media requires adhesion.Apiezon H grease has been approved by NASA as a material suitable for lubricating the gold-plated threads of small variable capacitors required to operate under high vacuum from -65°C to +125°C to prevent galling.
$315.00
-
Apiezon Apiezon L grease. 25g tube
Apiezon L grease. 25g tube Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease suitable for use scientific and industrial applications. Apiezon L Grease has the best vapour pressure properties of all the Apiezon products and is therefore suitable for use in ultra-high vacuum applications. L Grease is regularly used by highly respected organisations such as The European Space Agency, NASA and NATO. Apiezon L Grease is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease which: exhibits an extremely low vapour pressure of 7 x 10-11 Torr at 20°C does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As an ultra-high vacuum grease with excellent lubrication properties and radiation resistance Apiezon L Grease is used for many diverse applications. In particular, L Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon L Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon L Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon L Grease this is not a problem. As a halogen-free product Apiezon L Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, L Grease maintains excellent lubrication properties in high radiation applications, demonstrating only a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. To find out more about Apiezon L Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon L Grease Vapour Pressure Graph MSDA Techinical Data Sheet
$210.00
-
Apiezon Apiezon M grease
Apiezon M grease Apiezon M Grease is a silicone and halogen-free high vacuum grease and is ideally suited to all manner of high vacuum applications. Its inherent versatility means M Grease is also frequently used for non-vacuum purposes in both scientific and industrial settings and it is approved for use by NATO. Apiezon M Grease is designed for use in high vacuum environments at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon M Grease is a silicone- and halogen-free high vacuum grease which: does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures exhibits a vapour pressure of 1.7 x 10-9 Torr at 20°C has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As a high vacuum grease with excellent lubrication properties and radiation resistance, Apiezon M Grease is used for many diverse applications. In particular, M Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon M Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon M Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon M Grease this is not a problem. As a halogen-free product, Apiezon M Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, M Grease maintains excellent lubrication properties in high radiation applications, despite a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. Apiezon M Grease has strong powers of absorption, particularly for other hydrocarbon molecules due to its complex hydrocarbon structure and very high molecular weight. Consequently it is frequently used as a stationary phase in gas chromatography. Apiezon M Grease Vapour Pressure Graph MSDS Technical Data Sheet
$145.00 - $240.00
-
Apiezon Apiezon N Cryogenic Vacuum Grease
Apiezon N Cryogenic Vacuum Grease Apiezon N Grease is silicone-free and widely recognized and recommended as the cryogenic vacuum grease of choice. This cryogenic grease is specially formulated to exhibit craze-free performance characteristics at low temperatures and withstand frequent cycling between cryogenic temperatures as low as -273°C and +30°C. Safety Data Sheet Thermal Conductance Sheet Technical Data Sheet Apiezon N Grease: Cryogenic High Vacuum Grease Properties Apiezon N Grease is a silicone- and halogen-free cryogenic high vacuum grease which: can withstand frequent cycling between cryogenic temperatures as low as -273°C and +30°C is craze-free at cryogenic temperatures has the ability to fill the micropores of adjoining surfaces, so improve thermal contact does not suffer from contamination problems associated with silicone based greases such as 'creep' or 'carry over' exhibits a vapour pressure of 6 x 10-10 Torr at 20°C has powerful 'gettering' action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean, use and remove as it is soluble in hydrocarbon solvents Please click the links for typical properties and vapour pressure graphs of Apiezon N Grease. Cryogenic Applications of Apiezon N Grease Cryogenic Vacuum Seal Apiezon N Grease exhibits extremely low vapour pressures at ambient temperatures, 6 x 10-10 torr at 20°C, which are further improved by reductions in temperature to the cryogenic region. Its ability to resist cracking at extremely low temperatures makes it particularly useful as a vacuum seal for cryosystems. Apiezon N Grease can be relied upon to form and maintain a vacuum seal for long periods, even when subjected to frequent thermal cycling, withstanding cycling between temperatures as extreme as -273°C and +30°C. Its unique properties mean N Grease is widely used to create a reliable vacuum and pressure-tight seals in, amongst others: vacuum lines; Schlenk lines; cold traps; liquid helium hoses and electron microscopes. Thermal Coupling Apiezon N Grease has a proven track record in improving thermal contact under cryogenic conditions. This is important for the coupling of cooling systems to superconducting magnets, cryostats, temperature sensors or any system that is required to reach cryogenic temperatures as quickly as possible. Low levels of magnetic susceptibility also make it ideal for superconductor manufacturing applications. Sensor Mounting Apiezon N Grease is ideal for use in cryogenic sensor mounting. It is pliable at room temperature and solidifies at cryogenic temperatures to allow for easy mounting and removal of sensors without causing damage. Sample Mounting Important in low-temperature testing of semiconductor chips, laser diodes and crystals, etc., Apiezon N Grease is used to improve thermal contact between the sample boat and cold finger of a cryotstat. This cryogenic thermal contact grease ensures that samples are at the lowest possible temperatures to improve test sensitivities. Ambient Temperature Applications - Added Cushioning Apiezon N Grease can be used in a variety of applications at ambient temperatures such as when added cushioning is required. N Grease has a special additive which gives it a tenacious, rubbery consistency which absorbs vibrations in equipment, making N Grease invaluable in fragile glass to glass joints, like burette taps, which continually risk fracture.
$298.00
-
Apiezon Apiezon PFPE 501 High Temperature Vacuum Grease
Apiezon PFPE 501 High Temperature Vacuum Grease 100g We are pleased to announce that there is a new addition to the Apiezon range of high vacuum greases. Delivering the quality and reliability synonymous with the Apiezon brand, PFPE 501 is the perfect addition to our range. PFPE 501 is a chemically inert, high temperature and extreme pressure lubricant. With an upper operating temperature of 250°C and vapor pressure of 1.3 x 10-12 at 25°C, it is robust, versatile and can be used for sealing and lubricating under the most extreme operating conditions. This includes environments where aggressive chemicals and strong oxidizing agents are regularly used. As most Apiezon users are more familiar with hydrocarbon chemistry we’d like to provide some background on what PFPE is, and how its molecular structure can explain its physical properties. This information can be found in What is PFPE? Safety Data Sheet Technical Data Sheet Why Use Apiezon PFPE 501 Grease? PFPE based High temperature lubricant Used in oxygen-rich environments Ultra high vacuum Chemically inert Extreme pressure Wide temperature range Benefits of Apiezon PFPE 501 Grease? Extended equipment life High temperature lubricant Reduced equipment downtime Lower service costs Life-time lubrication 10 year shelf life Guaranteed Apiezon quality Expert technical support
$315.00
-
Apiezon Apiezon Q Sealing Compound
Apiezon Q Sealing Compound Apiezon Q Compound sealant can be used to seal around the edges of flat unground joints, to blank off parts of an apparatus temporarily or to seal glass cylinders to metal plates to produce temporary vacuum enclosures. Whether sealing joints, filling in holes or filling gaps in a vacuum system, it is extremely versatile and is the ideal leak sealant in a wide array of uses and industries. Temporary vacuum sealant Versatile product suitable for a multitude of uses Excellent waterproof medium Easy to use and to remove Ambient temperatures (10 to 30°C) 10 year shelf life MSDS Technical Data Sheet
$300.00
-
Apiezon Apiezon T grease
Apiezon T grease Apiezon T Grease is a silicone-free medium temperature vacuum grease renowned for its quality and tenacity. Apiezon T Grease has gained approval from prestigious organisations including NATO and the US Navy. Apiezon T Grease is a silicone-free medium temperature vacuum grease which: performs well under a wide range of temperatures, from +10 to +120°C is not recommended for highly stressed bearings has added cushioning exhibits good ‘stiction’ or sticking power has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents exhibits a vapour pressure of 4.6 x 10-9 Torr at 20°C As a vacuum grease, Apiezon T Grease is specifically designed for use in the low to medium vacuum range, yet is suitable to be used in the high vacuum range at lower temperatures. We specifically recommend that Apiezon T Grease is used for both sealing and lubrication in medium temperature environments (but not for highly stressed bearings). T Grease confers excellent cohesive strength and therefore when joints are mated they stay mated, forming an extremely efficient, gas tight seal. Apiezon T Grease provides extra cushioning between mated surfaces, and is highly effective in protecting fragile glass to glass joints. The strong absorption properties of Apiezon T Grease give it a powerful ‘gettering’ action . This is of considerable value in the electronics industry where scrupulous cleanliness of metal surfaces is required. Apiezon T Grease has also found a niche as a barrier to oxygen transmission in both vacuum and non-vacuum situations. Apiezon T Grease Vapour Pressure Graph MSDS Technical Data Sheet
$295.00
-
Argon Gas 99.5% - Pure gas for preserving terpenes in flowers and concentrates
Argon Gas Beverage Grade 99.5% Pure Made in Italy Our Pure Argon gas is for preserving terpenes and maximizing shelf life, for flowers and concentrates. The pure argon gas displaces air inside your storage containers, this eliminates oxygen, carbon dioxide and humidity to prevent oxidation of your terpenes and lengthens your shelf life. For the large tank of Argon the gas can be removed using our regulator or valve dispenser that attaches to the top of the tank. Directions: Using an empty container. Point nozzle toward the bottom of your container. Apply 2-seconds per every 4oz of container volume. Immediately fill container with desired material and securely close the lid. *Note Argon is heavier than air, Tank/Cartridge Pressure 1450 PSI Tank Volume of Argon Coverage Product Sku: 26g / 14.6 Liters / 3.8 Gallons ~6.3 lbs of flower ARGON-26G 185g / 103 Liters / 27 Gallons ~31.7 lbs of flower ARGON-130G Regulator Details 14.6 Liters/ with Duster Kit - Thumb touch control button w/ Lock, regulated to 40 PSI. Made in Japan. Thread: 5/8"-18 for use with the 26g Argon Cartridge. 3.5" long nozzle. (Duster Valve can be purchased separately.) 103 Liters/ with Regulator Kit - Adjustable via. needle valve, regulated to 80 PSI. Made in Italy. Thread: M11x1 (tank connection). Output: 1/4" Brass Barb, Includes 12" Tygon Tubing. Gauges read in BAR. 103 Liters/ with M11 Valve Dispenser Kit - Includes adjustable pushpin style valve dispenser. Output: 1/4" Brass Barb, Includes 12" Tygon Tubing. NO GAUGES *All single 130g argon tanks come with a plastic nozzle for general dispensing. If the regulator is beyond your budget you can attach a tube of your choice. Nozzle tip diameter 3/8" - Recommend choosing a 3/8" Inside Diameter tube or larger and cut to your desired length. *At end of use, completely empty the tank for recycling. What Is Argon? Argon is a chemical element with the symbol "Ar" and atomic number 18. It is a noble gas, which means it belongs to a group of inert and colorless gases that are chemically stable and relatively non-reactive under normal conditions. Argon is the third most abundant gas in the Earth's atmosphere, making up about 0.93% of the air we breathe. Despite its abundance, argon is mostly used in specialized industrial applications due to its inert and non-reactive properties. It is obtained as a byproduct of the production of liquid oxygen and liquid nitrogen through the fractional distillation of air. In its natural state, argon is odorless, tasteless, and colorless. What Is Argon Used For? Argon has a variety of practical and industrial uses due to its inert and non-reactive nature. Some of the key applications of argon include: Welding: Argon is commonly used as a shielding gas in welding processes, such as TIG (Tungsten Inert Gas) and MIG (Metal Inert Gas) welding. It helps prevent oxidation and ensures clean and strong welds. Laboratory Research: Argon is used as a carrier gas in gas chromatography and as an inert atmosphere in scientific laboratories to prevent reactions with sensitive materials. Electronics and Semiconductors: Argon is used in the production of semiconductors and other electronic components, providing a controlled environment for manufacturing processes. Preservation of Perishable Goods: In the food and beverage industry, argon is used to displace oxygen and extend the shelf life of perishable goods, such as wine, by preventing oxidation and spoilage. Medical Applications: Argon is employed in laser surgery and serves as a coolant for superconducting magnets in MRI (Magnetic Resonance Imaging) machines. Deep-Sea Diving: Argon-helium mixtures are used in deep-sea diving to reduce the effects of high pressure on the human body. Lighting: Although less common now, argon was used in incandescent light bulbs to prevent the filament from oxidizing. Metal Manufacturing: Argon is used in the production of metals like titanium and other reactive metals to create a controlled atmosphere. Heat Treating: In heat-treating processes, argon is used as a protective atmosphere to prevent oxidation and maintain the desired material properties. Window Insulation: Argon is sometimes used to fill the space between double or triple-pane windows to improve insulation and energy efficiency. Astronomy: Argon is used in some types of telescopes to create a stable and controlled environment for the detectors. These applications highlight the versatility of argon in various industries, where its inertness and non-reactivity play a crucial role in maintaining controlled and stable conditions for specific processes. How Does Argon Preserve Terpenes? Argon can be used to preserve terpenes through its inert and non-reactive properties. Terpenes are volatile organic compounds responsible for the aroma and flavor of various plants. When exposed to oxygen or other reactive gases, terpenes can degrade or oxidize, leading to a loss of their aromatic and flavor characteristics. By using argon as a protective gas, you can create an oxygen-free environment that prevents terpenes from coming into contact with reactive molecules. This helps to preserve the integrity of terpenes and maintain their original aroma and flavor profiles. When storing or handling terpene-rich products, such as essential oils or botanical extracts, introducing argon gas can help extend the shelf life and ensure that the product retains its desirable sensory attributes. Argon's inert nature means it does not chemically interact with the terpenes, preventing unwanted reactions that could lead to degradation. It forms a barrier between the terpenes and the surrounding air, effectively shielding them from oxygen and moisture, both of which can contribute to terpene degradation. Argon can be a valuable tool for terpene preservation during storage, Helping you preserve the unique terpene profiles of different strains making it crucial for maintaining product quality. How Does Argon Displace Oxygen? Argon displaces oxygen through a process called inert gas displacement or dilution. This occurs when argon, which is denser than air, is introduced into an enclosed space, pushing the lighter oxygen molecules upward and out of the area. As a result, the concentration of oxygen in the space decreases, creating an atmosphere that is less conducive to combustion and other chemical reactions. Here's how the displacement process works: Density Difference: Argon is significantly denser than air, which means it has a higher mass per unit volume. When argon is released into an enclosed space, it naturally sinks to the bottom, displacing the lighter gases like oxygen and nitrogen that make up the atmosphere. Mixing: As argon is introduced, it starts to mix with the existing air in the space. The heavier argon molecules tend to concentrate near the bottom, while the lighter oxygen molecules rise to the top. Oxygen Reduction: As argon continues to fill the space, the concentration of oxygen molecules decreases. Oxygen is gradually pushed upward and out of the area, leading to a lower oxygen content in the atmosphere. Inert Environment: The increasing presence of argon creates an inert environment where oxygen is less available to support oxidation. This is particularly useful in storing oxidizable compounds. It's important to note that while argon displaces oxygen, it does not chemically react with other gases or substances. Instead, it creates a physical barrier between oxygen and the materials that could ignite or react with it. This property makes argon a valuable tool in fire suppression systems, as well as in applications like food preservation, where a low-oxygen environment helps extend the shelf life of products. When working with argon, especially in confined spaces, proper safety measures should be followed to prevent oxygen depletion and ensure a safe working environment. How Do I Use Argon For Flower and Concentrate Storage? Using argon for flower and concentrate storage is a simple and effective method to help preserve the quality and freshness of your products. Follow these steps to properly use argon gas for storage: Prepare the Container: Start with a clean and empty container that is suitable for storing your flower or concentrate. Ensure that the container has a tight-fitting lid or cap to create a sealed environment. Position the Nozzle: Hold the argon gas canister with the nozzle pointing toward the bottom of the container. This helps ensure that the argon gas displaces any oxygen present in the container. Apply Argon Gas: Press the nozzle to release the argon gas into the container. The recommended dosage is approximately 2 seconds of spraying for every 4 ounces of container volume. This dosage helps create a protective layer of argon gas within the container. Fill the Container: Immediately after applying the argon gas, place your desired flower or concentrate into the container. The argon gas will create a blanket of protection over the material, minimizing its exposure to oxygen. Securely Close the Lid: Once the container is filled with the material, seal it tightly with the lid or cap. Make sure the container is properly closed to maintain the sealed environment. Store in a Cool, Dark Place: Store the sealed container in a cool, dark place to further protect the contents from light and heat. Proper storage conditions are essential for maintaining the quality and potency of your flower or concentrate. Using argon gas in this manner helps create an oxygen-free atmosphere within the container, reducing the risk of oxidation and degradation of your products. By minimizing oxygen exposure, you can extend the shelf life and preserve the flavors, aromas, and potency of your flower and concentrate. Remember to always follow safety precautions when handling argon gas, including proper ventilation and avoiding direct inhalation. Additionally, ensure that the argon gas canister is stored and used in accordance with manufacturer guidelines. How Can I Preserve Wine With Argon? Preserving wine with argon is a popular method to extend the shelf life of opened bottles and maintain the wine's freshness and flavor. Follow these steps to effectively use argon gas for wine preservation: Gather the Necessary Equipment: Argon gas canister with a preservation nozzle or wine preservation system An opened bottle of wine with a cork or closure Position the Nozzle: Insert the dispensing line or nozzel into the neck of the wine bottle. If using an argon gas canister with a preservation nozzle, insert the nozzle into the bottle's neck, ensuring a tight fit. If using a wine preservation system, follow the manufacturer's instructions for attaching the system to the bottle. Apply Argon Gas: Press the nozzle to release a short burst of argon gas into the bottle. The argon gas is heavier than air and will displace the oxygen present in the bottle, creating a protective layer on top of the wine. Recap or Recork: Immediately after applying the argon gas, recap the bottle with its original cork or closure. Make sure the closure is securely in place to maintain a seal. Store the Bottle: Store the wine bottle upright in a cool and dark place, away from direct sunlight and temperature fluctuations. Enjoy Over Time: When you're ready to enjoy the wine again, simply remove the closure and pour a glass. The argon gas layer will have helped protect the wine from oxidation, allowing you to savor the wine's original flavors and aromas. It's important to note that argon gas is denser than air, so it will naturally settle on top of the wine. This layer of argon forms a barrier between the wine and the oxygen, preventing oxidation and preserving the wine's quality. Using argon gas for wine preservation is a convenient and effective method to enjoy opened bottles of wine over an extended period. It's particularly useful for wines that are meant to be enjoyed gradually, as well as for special bottles that you want to savor over time without worrying about deterioration. Always follow the manufacturer's guidelines for using argon gas for wine preservation and handle the gas canister with care. Chemical Formula: Ar Molecular Weight: 39.9 g/mol CAS Registry Number: 7440-37-1 Appearance Colorless Odor: Odorless Density 0.103 lb/ft3 Boiling Point: N/A Solubility in water: N/A GHS Pictograms: GHS Signal Word: Warning GHS Hazard Statements: H280, H281 GHS Precautionary Statements P282, P336+P317, P403, and P410+P403 UN Identification Number: 1006 Proper Shipping Name: Argon, Compressed Transport Hazard Class: 2.2 Packing Group: None DOT Placard: Argon Safety Data Sheet (SDS)
$16.50 - $167.00
-
Ashless Filter Papers - 110MM - Quantitative
Ashless Filter Papers - 110MM - Quantitative Ashless quantitative and qualitative filter papers provide laboratory grade filtration for extraction systems and are specifically used in combination with a Buchner funnel to remove fats, waxes and any other unwanted contaminants from your solution. These filter papers are used in the pre-processing stage of short path distillation to clean up the material prior to processing. Key Features: ISO 9001 Approved Manufactured from alpha-cellulose and cotton linters High Purity and low background Consistent performance Low ashless content: <0.007% (Quantitative Filter Paper) Whatman equivalent quality Pre-Cut for ease of use Specifications: Classification Quantitative Sizes Available: BIO-40 8um - Medium BIO-41 20-25um - Fast BIO-42 2.5um - Slow BIO-44 3um - Slow Ash Content <0.007% Quantity per Pack 100 Diameter 110mm (4.33") Technical Data: Grade Particle Retention Appearance Speed Ash Content (%) Basis Weight (g/m2) Wet burst (mm H2O) BIO-1 11um Smooth Medium <0.1 80.0±4.0 >140 BIO-2 8um Smooth Medium <0.1 80.0±4.0 >140 BIO-4 20um Smooth Fast <0.1 80.0±4.0 >120 BIO-5 2.5um Smooth Slow <0.1 80.0±4.0 >180 BIO-6 3um Smooth Slow <0.1 80.0±4.0 >180 BIO-40 8um Smooth Medium <0.007 80.0±4.0 >140 BIO-41 20-25um Smooth Fast <0.007 80.0±4.0 >120 BIO-42 2.5um Smooth Slow <0.007 80.0±4.0 >180 BIO-43 16um Smooth Medium to Fast <0.007 80.0±4.0 >120 BIO-44 3um Smooth Slow <0.007 80.0±4.0 >180
$45.00
-
Ashless Filter Papers - 125MM - Quantitative
Ashless Filter Papers - 125MM - Quantitative Ashless quantitative and qualitative filter papers provide laboratory grade filtration for extraction systems and are specifically used in combination with a Buchner funnel to remove fats, waxes and any other unwanted contaminants from your solution. These filter papers are used in the pre-processing stage of short path distillation to clean up the material prior to processing. Key Features: ISO 9001 Approved Manufactured from alpha-cellulose and cotton linters High Purity and low background Consistent performance Low ashless content: <0.007% (Quantitative Filter Paper) Whatman equivalent quality Pre-Cut for ease of use Specifications: Classification Quantitative Sizes Available: BIO-40 8um - Medium BIO-41 20-25um - Fast BIO-42 2.5um - Slow BIO-44 3um - Slow Ash Content <0.007% Quantity per Pack 100 Diameter 125mm (4.92") Technical Data: Grade Particle Retention Appearance Speed Ash Content (%) Basis Weight (g/m2) Wet burst (mm H2O) BIO-1 11um Smooth Medium <0.1 80.0±4.0 >140 BIO-2 8um Smooth Medium <0.1 80.0±4.0 >140 BIO-4 20um Smooth Fast <0.1 80.0±4.0 >120 BIO-5 2.5um Smooth Slow <0.1 80.0±4.0 >180 BIO-6 3um Smooth Slow <0.1 80.0±4.0 >180 BIO-40 8um Smooth Medium <0.007 80.0±4.0 >140 BIO-41 20-25um Smooth Fast <0.007 80.0±4.0 >120 BIO-42 2.5um Smooth Slow <0.007 80.0±4.0 >180 BIO-43 16um Smooth Medium to Fast <0.007 80.0±4.0 >120 BIO-44 3um Smooth Slow <0.007 80.0±4.0 >180
$50.00
-
Ashless Filter Papers - 180MM - Quantitative
Ashless Filter Papers - 180MM - Quantitative Ashless quantitative and qualitative filter papers provide laboratory grade filtration for extraction systems and are specifically used in combination with a Buchner funnel to remove fats, waxes and any other unwanted contaminants from your solution. These filter papers are used in the pre-processing stage of short path distillation to clean up the material prior to processing. Key Features: ISO 9001 Approved Manufactured from alpha-cellulose and cotton linters High Purity and low background Consistent performance Low ashless content: <0.1% Whatman equivalent quality Pre-Cut for ease of use Specifications: Classification Qualitative Sizes Available: BIO-1 11um - Medium BIO-4 20um - Fast BIO-5 2.5um - Slow BIO-6 3um - Slow Ash Content <0.1% Quantity per Pack 100 Diameter 180mm (7.09") Technical Data: Grade Particle Retention Appearance Speed Ash Content (%) Basis Weight (g/m2) Wet burst (mm H2O) BIO-1 11um Smooth Medium <0.1 80.0±4.0 >140 BIO-2 8um Smooth Medium <0.1 80.0±4.0 >140 BIO-4 20um Smooth Fast <0.1 80.0±4.0 >120 BIO-5 2.5um Smooth Slow <0.1 80.0±4.0 >180 BIO-6 3um Smooth Slow <0.1 80.0±4.0 >180 BIO-40 8um Smooth Medium <0.007 80.0±4.0 >140 BIO-41 20-25um Smooth Fast <0.007 80.0±4.0 >120 BIO-42 2.5um Smooth Slow <0.007 80.0±4.0 >180 BIO-43 16um Smooth Medium to Fast <0.007 80.0±4.0 >120 BIO-44 3um Smooth Slow <0.007 80.0±4.0 >180
$55.00
-
Ashless Filter Papers - 350MM - Quantitative
Ashless Filter Papers - 350MM - Quantitative Quantitative and qualitative filter papers provide laboratory grade filtration for extraction systems and are specifically used in combination with a Buchner funnel to remove fats, waxes and any other unwanted contaminants from your solution. These filter papers are used in the pre-processing stage of short path distillation to clean up the material prior to processing. Key Features: ISO 9001 Approved Manufactured from alpha-cellulose and cotton linters High Purity and low background Consistent performance Whatman equivalent quality Pre-Cut for ease of use Specifications: Classification Quantitative Sizes Available: AFP-1 11um - Medium AFP-4 20um - Fast Quantity per Pack 100 Diameter 350mm (13.78")
$95.00
-
ASME 250 PSI Brass Safety Valve - 1/2" MNPT
ASME 250 PSI Brass Safety Valve - 1/2" MNPT Model “SB” ASME safety valve is a high capacity safety valve. Unique O-ring seal ensures valve is bubble-tight to within 10% of set pressure. Set pressure tolerance is +/-3%. SB50 Outline Drawing SB Flow Charts Specifications Construction: Brass Stainless Steel Springs FKM O-Ring Seal Set Pressure 250 PSI Max Temp. 250ºF
$76.00
-
ASME Certified 10LB Jacketed Collection Base 304L - Bare
ASME Certified 10LB Jacketed Collection Base 304L - Bare This is a custom manufactured USA made ASME Certified 100LB Jacketed Collection base with UM Stamp and made out of 304L Stainless Steel. This base is designed to be configured to any application and can even be used as a solvent tank. This tank comes bare with no fittings and will hold around 50LBS of liquid butane and is able to have fluid circulated around the outer jacket to increase recovery speeds in the extraction system. **This Item will ship Via FREIGHT ONLY. Specifications Material 304L Stainless Steel Certification: ABILITY ENGINEERING TECHNOLOGY INC. ASME / UM / NB MAWIWP 350 PSI at 150°F MAWEWP N/A MIN TEMP -20°F at 350PSI Butane Capacity ~50LBS Connection Sizes: 6" Tri-Clamp (2) 1" NPT (2) 1/2" NPT - Outer Jacket Ports (2) 3/8" NPT Weight 146LBS Outer Dimensions: 32-7/8" Tall 14" Diameter Inner Dimensions: 24" Tall 12" Diameter
$3,000.00 $1,400.00
-
ASME Certified 50L Jacketed Solvent Tank 304L - Bare
ASME Certified 50L Jacketed Solvent Tank 304L - Bare This is a custom manufactured USA made ASME Certified 50LB Jacketed Collection base with UM Stamp and made out of 304L Stainless Steel. This base is designed to be configured to any application and can even be used as a solvent tank. This tank comes bare with no fittings and will hold around 50LBS of liquid butane and is able to have fluid circulated around the outer jacket to increase recovery speeds in the extraction system. **This Item will ship Via FREIGHT ONLY. Specifications Material 304L Stainless Steel Certification: ABILITY ENGINEERING TECHNOLOGY INC. ASME / UM / NB MAWIWP 350 PSI at 150°F MAWEWP N/A MIN TEMP -20°F at 350PSI Butane Capacity ~50LBS Connection Sizes: 6" Tri-Clamp (2) 1" NPT (2) 1/2" NPT - Outer Jacket Ports (2) 3/8" NPT Weight 146LBS Outer Dimensions: 32-7/8" Tall 14" Diameter Inner Dimensions: 24" Tall 12" Diameter
$1,800.00 $1,000.00
-
ASME-Code Fast-Acting Pressure-Relief Valve for Air, Silicone Seal, 1/4 NPT
ASME-Code Fast-Acting Pressure-Relief Valve for Air, Silicone Seal, 1/4 NPT Valve Function Pressure Relief For Use With Air, Inert Gas Activation Pressure Driven Inlet Pipe Size 1/4 Connection Type Pipe Pipe Connection Type Threaded Connection NPT Male Location Bottom Relief Port Connection Type Vent Relief Port Location Side Set Pressure Configuration Nonadjustable Temperature Range -15° to 250° F Valve Shape 90° Elbow Valve Body Shape Straight Overall Height Varies Material Body Brass Seal Silicone Test Mechanism Ring Valve Type Pop Safety Specifications Met ASME BPVC.VIII RoHS RoHS 3 (2015/863/EU) compliant with exemption 6(c) - Lead in copper alloy REACH Not Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 848140.0000 ECCN EAR99 To protect against damage in air lines, air receivers, compressor tanks, and other air-powered equipment, these valves spring fully open at the set pressure and remain open until the system pressure is restored below the set pressure. All meet ASME Code Section VIII for use with air and inert gas pressure vessels. They have a vented relief port to exhaust discharge directly. Silicone seals provide better leak protection than brass seals.
$40.00
-
ASME-Code Fast-Acting Pressure-Relief Valve for Air, Test Ring, Brass Seal, 1/4 NPT, 3-1/8" High
ASME-Code Fast-Acting Pressure-Relief Valve for Air, Test Ring, Brass Seal, 1/4 NPT, 3-1/8" High Valve Function Pressure Relief For Use With Air, Inert Gas Activation Pressure Driven Inlet Pipe Size 1/4 Connection Type Pipe Pipe Connection Type Threaded Connection NPT Male Location Bottom Maximum Pressure 300 psi Relief Port Connection Type Vent Relief Port Location Side Set Pressure Configuration Nonadjustable Temperature Range -40° to 400° F Valve Shape 90° Elbow Valve Body Shape Straight Overall Height 3 1/8" Material Body Brass Seal Brass Test Mechanism Ring Valve Type Pop Safety Specifications Met ASME BPVC.VIII RoHS RoHS 3 (2015/863/EU) compliant with exemption 6(c) - Lead in copper alloy REACH REACH (EC 1907/2006) (07/08/2021, 219 SVHC) Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 848140.0000 ECCN EAR99 To protect against damage in air lines, air receivers, compressor tanks, and other air-powered equipment, these valves spring fully open at the set pressure and remain open until the system pressure is restored below the set pressure. All meet ASME Code Section VIII for use with air and inert gas pressure vessels. They have a vented relief port to exhaust discharge directly.
$61.00
-
North Spore Automated 'Boomr Bin' + CVG Monotub Mushroom Grow Kit
What's Included Automated monotub kit includes: (1) Boomr Bin monotub (1) FAE Fan Mini w/ power control (1) Myco-Mister Mini humidifier w/ hose (1) Monotub hose connector (1) MYCOntroller humidity controller (hygrometer) Substrate kit includes: (2) CVG sterile bulk substrate (5 lbs each) (1) Sterilized grain bag with injection port (3 lbs) (1) Myco Coco compressed coco coir (3.4L) (1) Sheet of 1" monotub filters (1) Sheet of 2" monotub filters
$199.00
-
North Spore Automated 'Boomr Bin' Dung-Loving Monotub Mushroom Grow Kit
What's Included Automated monotub kit includes: (1) Boomr Bin monotub (1) FAE Fan Mini w/ power control (1) Myco-Mister Mini humidifier w/ hose (1) Monotub hose connector (1) Mycontroller humidity controller (Humidistat) Substrate kit includes: (3) Boomr Bag sterile bulk substrate (5 lbs each) (1) Sterilized grain bag with injection port (3 lbs) (1) Myco Coco compressed coco coir (3.4L) (1) Sheet of 1" monotub filters (1) Sheet of 2" monotub filters
$279.99
-
North Spore Automated 'Boomr Bin' Monotub Mushroom Grow Kit
$149.99
You have seen 576 out of 1731 products