Chillers / Heaters
BVV™ Neocision 5 Liter Heated Circulator - ETL Listed
BVV™ Neocision 5 Liter Heated Circulator - ETL Listed The brand new BVV™ Neocision 5 Liter Heated Circulator - ETL Listed brings very stable temperature control and lab grade quality at a great price. This refrigerated circulator has a durable powder coated exterior with a stainless steel top, stainless steel interior and a large control head with digital display. BVV Neocision 5 Liter Heated Circulator - ETL Listed Key Features: ETL Certified Digital Control Head with Large Display Corrosion Resistant Stainless Steel Top and Interior 135°C Max Temperature Rubber Feet for Vibration Dampening and Noise Reduction 5L Internal Reservoir Capacity Small Table Top Design Specifications Model Number NEO-7H Voltage 115V / 60Hz Wattage 1000w Reservoir Capacity 5L/ 1.32G Temperature Range RT+5°C to 135°C Internal Dimensions 5.9" x 6.3" x 5.9" External Dimensions 13-1/4" x 7-3/4" x 15" Display Resolution 0.1°C Temperature Stability +/- 0.1°C Flow Rate 8L/min
$2,331.80
Neocision 20L Chiller (-40c) - ETL Rated
NEOCISION 20L Chiller (-40c) - ETL Rated Product Name Circulating Chiller Model NEO20L-40 Reservoir volume L) 20L Refrigeration performance No-load minimum temperature (℃) A: ﹣ 20℃ ( Customizable: ﹣ 30℃ / C: ﹣ 40℃ Best operating temperature (℃) A: ﹣ 20℃ ~ 20℃B: ﹣ 30℃ ~ 20℃C: ﹣ 40℃ ~ 20℃ Best operating environment (℃) ≤30 Environmental relative humidity (%RH) ≤65 Cooling capacity at -40 ℃ kw 0.7 Refrigerant R404A Electrical performance Cooling unit power (W) 1500 Sensor pt100 Controller, monitor liquid crystal Computer interface R485 optional safety protection Compressor delay protection, machine leakage,over-current, over-voltage protection Power AC230V±10%/60HZ Pump Power (W) 15 Maximum flow (L/min) 10 Maximum lift (m) 2.5 Liquid inlet and outlet pipe diameter (mm) φ18 Whole machinefunction Total Weight (Kg) 105 Tank opening/depth ( mm) φ300mm*300mm Out size (mm) 420*580*790 Adaptation rotary evaporator (volume* number) 10L*2 Note The equipment can be customized to different supply voltage frequency; different flow head external circulation system and external magnetic stirring device. TEMP: Displays the measured temperature value. To set the desired temperature, press the setting key until the TEMP SET value flashes. Press the setting key again to confirm the parameter. SET: Displays the desired temperature value set manually. RUN: Indicates that the chiller is operating. Cooling Indicator: Appears when the chiller is cooling. Circulation Indicator: Appears when the pump is operating. TIME: Displays the set running time; this value countdowns to zero and operation stops. To set a timer, press the setting key. When the TIME value flashes, enter the desired time using they arrow keys. Leave at zero if a timer is not needed. Silence Indicator: Appears when an alarm has been silenced. Alarm Indicator: It will appear when there is an alarm. Settings: Used for manually setting values and parameters. Left Arrow: Shifts to the numbers on the left to set desired value. Down Arrow: One push will decrease 1 digit; A long press will decrease digits faster. Up Arrow: One push will increase 1 digit; A long press will increase digits faster. Cooling Key: Press and hold key for more than 4 seconds to control start/stop the cooling function. Circulation Key: Press to start/stop the circulation function. Note: After all parameters have been input, press the cooling key for four seconds to being operation. Instructions Before Use The unit should be used under the following conditions: Place on a stable, non-combustible flat surface Ambient temperature of 5 ~ 35 ℃ Relative humidity ≤ 85% Atmospheric pressure: (86 ~ 106) KPa Altitude not higher than 2000 meters Power: 5L AC 110V±10%/60HZ, 20L: AC230V±10%/60HZ Keep away from any heat, corrosive gasses, strong vibration and electromagnetic sources. Provide a minimum of 300mm of space for proper ventilation (front and rear) Do not spill liquid anywhere other than the bath. When setting temperatures pay attention to freezing points (ethanol/ethylene glycol). When operating for the first time after replacing the heat transfer fluid there may be air trapped in the circulating pump, follow these instructions to purge: a. Disconnect the outlet line from the application NOTE: Fluid may leak from application, be ready with a bucket or plug the port. Hold the Outlet hose above the top of the bath so fluid does not drain out. b. Place the outlet hose into a clean collection bucket. c. Hold the outlet hose firmly so it does not fall out of the collection bucket d. Wearing safety glasses to shield any splashes, turn on the circulating function. e. After the liquid flow significantly increases, turn off the circulator. f. Reconnect the hoses to your application’s ports.
$7,068.28
Huber VPC Bypass M30x1,5
huber VPC Bypass M30x1,5 VPC Bypass M30x1,5Stepless controlled VPC bypass M30x1,5 (not mounted on unit) for Unistatstemperature range: -90°C ... 200°C Bypass supplied separately for mounting in pipework (at the application), and can be mounted on fixed piping or on hoses. Ingress protection class IP 20 (internal location) temperature range: -90°C...200°C for units with pumps up to 6 bar.
$14,442.61
HUBER CC-304B Heating Bath Circulator
HUBER CC-304B Heating Bath Circulator (Please Note: There is a shipping lead time of 2 - 3 weeks) Heating Bath Circulators with a stainless steel bath allow the temperature control of internal and external thermoregulation tasks. Items can be directly thermoregulated by placing them in a thermostat bath and the control of externally connected applications is also possible. Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range (-20) 28...300 °C Temperature stability ±0,02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 8.27 x 13.19 x 15.43 inches Weight 28.66 Lb Heating / Cooling Capacity Heating capacity 3 kW Circulation Pump Pressure pump max. 6.6 gpm ; 10.15 psi Suction pump max. 4.89 gpm ; 5.8 psi Pump connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old Sku 2005.0002.01 2005.0002.01-UL Permissible ambient temp. 5 to 40 °C Bath opening WxD/BD 5.12 x 3.94 / 6.1 inches Bath volume 5 Litres Filling volume min. 3,2 Litres Power supply 110V - 50/60Hz Current max. 14 A Fusing 15 A
$9,997.61 - $10,726.30
Huber CC-315B with Pilot ONE
Huber CC-315B with Pilot ONE (Lead time may vary.) Heating bath circulation thermostats with a stainless steel bath allow the temperature control of internal and external thermoregulation tasks. Items can be directly thermoregulated by placing them in a thermostat bath and the control of externally connected applications is also possible. The units are suitable for a number of typical temperature control tasks such as sample temperature control, materials testing, quality control, etc. The devices are fitted with overtemperature and low-level protection in line with Safety Class III/FL according to DIN 12876. A powerful pressure/suction pump ensures optimal circulation and temperature homogeneity in the thermostat bath and also allows temperature control of externally connected applications. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favorites menu, the one-click operation, and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Pilot ONE controller with Plug & Play technology Precise temperature control 5.7“ touchscreen and comfortable menu navigation Overtemperature and low level protection Safety class III/FL (DIN 12876) Powerful pressure/suction pump Programmer with calendar and clock functions 2-point calibration RS232 interface and Pt100 connection Data Sheet Click here to see Warranty Common Specifications Temperature range (-20) 28...300 °C Temperature stability ±0.02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 13.19 x 15.04 x 17.05 inches Weight 48.51 pounds Heating / cooling capacity Heating capacity 3 - 3,5 kW Circulation pump Pressure pump max. 25 lpm : 0,7 bar | 6.6 gpm ; 10.15 psi Suction pump max. 18.5 lpm : 0,4 bar | bar 4.89 gpm ; 5.8 psi Pump connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating data Old sku 2007.0003.01 Permissible ambient temp. 5...40 °C Bath opening W x D / BD 10.63 x 5.71 / 7.87 inches Bath volume 15 Liters | 3.96 gal Filling volume min. 11.5 Liters | 3.04 gal Power supply 208V 2~ 60Hz Current max. 16 A Fusing 20 A
$13,947.10 - $14,675.79
HUBER CC-505 Refrigerator Bath Circulator
HUBER CC-505 Refrigerator Bath Circulator (Please Note: There is up to 3 weeks Shipping lead time) This Refrigeration Bath Circulator controls the temperature of externally connected applications and Thermoregulation of objects directly in the thermostat bath. Typical applications are: photometers, refractometers, viscometers, double-jacketed reaction vessels and autoclaves. The units can be used in laboratories, for determining the freezing point, for deep temperature calibration, for petroleum tests, for temperature control of measuring devices and experimental setups as well as for materials testing and quality control. Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range -55 to 200 °C Temperature stability ±0.02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 16.14 x 18.9 x 30.08 inches Weight 136.71 Lb Heating / Cooling Capacity Heating capacity 1,6 kW Cooling machine air-cooled Refrigerant R507 (13.22 Lb) Circulation Pump Pressure pump max. 6.6 gpm ; 10.15 psi Suction pump max. 4.89 gpm ; 5.8 psi Pump connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old sku 2018.0010.01 Permissible ambient temp. 5 to 40 °C Bath opening WxD/BD 4.72 x 4.33 / 5.91 inches Bath volume 5 Liters / 1.32 gal Filling volume min. 4 Liters / 1.06 gal Power supply 208V 2~ 60Hz Current max. 12,5 A Fusing 2x16 A
$23,172.30 - $23,900.99
HUBER CC-508 Refrigerator Bath Circulator
HUBER CC-508 Refrigerator Bath Circulator (Please Note: There is up to 2 weeks Shipping lead time) This Refrigeration Bath Circulator controls the temperature of externally connected applications and Thermoregulation of objects directly in the thermostat bath. Typical applications are: photometers, refractometers, viscometers, double-jacketed reaction vessels and autoclaves. The units can be used in laboratories, for determining the freezing point, for deep temperature calibration, for petroleum tests, for temperature control of measuring devices and experimental setups as well as for materials testing and quality control. Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range -55 to 200 °C Temperature stability ±0.02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 16.14 x 18.9 x 30.08 inches Weight 127.89 Lb Heating / Cooling Capacity Heating capacity 2,45 kW Circulation Pump Pressure pump max. 6.6 gpm ; 10.15 psi Suction pump max. 4.89 gpm ; 5.8 psi Pump connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old sku 2018.0024.01 Permissible ambient temp. 5 to 40 °C Bath opening WxD/BD 4.72 x 4.33 / 6.3 inches Bath volume 5 Liters / 1.32 gal Filling volume min. 4 Liters / 1.6 gal Power supply 208V 2~ 60Hz Current max. 16,5 A
$27,471.57 - $28,200.26
HUBER CC-902 208V Refrigerator Bath Circulator
HUBER CC-902 Refrigerator Bath Circulator (Please Note: There is up to 3 weeks Shipping lead time) The Refrigeration Bath Circulators are created to control the temperature of externally connected. Applications are: photometers, refractometers, viscometers, double-jacketed reaction vessels and autoclaves. the units can be used, for determining the freezing point, for deep temperature calibration, for petroleum tests, for temperature control of measuring devices and experimental setups as well as for materials testing and quality control. Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products General information & Temperature Controller Temperature range -90...200 °C Temperature stability ±0.02 °C ±0.02 °C Controller Pilot ONE (E-grade "Basic") Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 550 x 600 x 911 mm | 21.65 x 23.62 x 35.87 inches Weight 139 kg | 306.5 pounds Heating / Cooling Capacity Heating capacity 1,2 kW Cooling capacity 100 20 0 -20 -40 -60 -80 °C1,2 1,2 1,2 1,1 0,9 0,6 0,2 kW Cooling machine air-cooled Refrigerant 1. stage R452A (A1, H280) (0,78 kg) Refrigerant 2. stage R508B (A1, H280) (0,46 kg) Circulation Pump Pressure pump max. 25 lpm ; 0.7 bar | 6.6 gpm ; 10.15 psi Suction pump max. 18.5 lpm ; 0.4 bar | 4.89 gpm ; 5.8 psi Pump Connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Permissible ambient temp. 5...40 °C Bath opening W x D / BD 120 x 110 / 150 mm | 4.72 x 4.33 / 5.91 inches Bath volume 5 Liters | 1.32 gal Power supply 208V 2~ 60Hz Current max. 18 A Fusing 2x20 A
$54,651.66 - $55,234.61
Huber CC-902 460V with Pilot ONE
Huber CC-902 460V with Pilot ONE (Please Note: There is up to 3 weeks Shipping lead time) The Refrigeration Bath Circulators are created to control the temperature of externally connected. Applications are: photometers, refractometers, viscometers, double-jacketed reaction vessels and autoclaves. the units can be used, for determining the freezing point, for deep temperature calibration, for petroleum tests, for temperature control of measuring devices and experimental setups as well as for materials testing and quality control. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favourites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Pilot ONE controller with Plug & Play technology Precise temperature control 5.7" touchscreen and comfortable menu navigation Overtemperature and low level protection Safety class III/FL (DIN 12876) Powerful pressure/suction pump Programmer with calendar and clock functions 2-point calibration RS232 interface and Pt100 connection Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General information & Temperature Controller Temperature range -90...200 °C Temperature stability ±0.02 °C ±0.02 °C Controller Pilot ONE (E-grade "Basic") Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 550 x 600 x 911 mm | 21.65 x 23.62 x 35.87 inches Weight 151 kg | 332.96 pounds Heating / Cooling Capacity Heating capacity 1,8 kW Cooling capacity 100 20 0 -20 -40 -60 -80 °C1,2 1,2 1,2 1,1 0,9 0,6 0,2 kW Cooling machine air-cooled Refrigerant 1. stage R452A (A1, H280) (0,78 kg) Refrigerant 2. stage R508B (A1, H280) (0,46 kg) Circulation Pump Pressure pump max. 25 lpm ; 0.7 bar | 6.6 gpm ; 101.5 psi Suction pump max. 18.5 lpm ; 0.4 bar | 4.89 gpm ; 5.8 psi Pump Connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Permissible ambient temp. 5...40 °C Bath opening W x D / BD 120 x 110 / 150 mm | 4.72 x 4.33 / 5.91 inches Bath volume 5 Liters | 1.32 gal Power supply 460V 3~ 60Hz Current max. 7,5 A
$54,433.05 - $55,161.74
HUBER CS Chillers
HUBER CS Chillers The new CS chillers expand the Huber product range with compact and highly affordable recirculating coolers. The Huber CS chillers combine cool and smart technology in one unit. The new chillers further reduce water consumption and lower the operating costs for many applications. The investment pays itself off after a short time because of the water savings and the low purchase price. Your advantages: Working temperature from -20 °C to +15 °C Cooling power up to 70 kW Pump performance up to 125 l/min Quiet operation less than 79 db Economic and ecological solution to eliminate costly water waste Easy to use and maintenance free With a cooling power up to 70 kW, the devices are particularly suited for constant temperature control for laboratory applications, e.g. for cooling vacuum pumps, rotary evaporators, electron microscopy, AAS-devices, ICP-devices, extraction, distillation and many more. Sku Model Temperature Range Pump Vapacity Max/Pump Connection Cooling power(kW) at (°C) HeatingPower NoiseLevel Dimensions Voltage Data Sheet (°C) (l/min) (bar) 15 10 0 -10 -20 (kW) (dB) W x D x H (inch) PDF VDH1100664 CS 25 -20...15 50 4.5 1/2" 3.5 2.5 1.6 0.98 0.7 - 60 22.8 x 26.0 x 32.3 208V 2~ 60Hz VDH1101336 CS 35 -20...15 30 4.0 1/2" 4.0 3.5 2.1 2.0 0.8 62 22.8 x 26.0 x 32.3 208V 2~ 60Hz VDH1100689 CS 50 -20...15 83 4.0 3/4" 8 5 4.2 3.5 2 - 63 26.8 x 28.7 x 59.8 460V 3~ 60Hz VDH4100126 CS 50-H -20...85 83 3.7 3/4" 8 5 4.2 3.5 2 2.8 63 26.8 x 28.7 x 59.8 460V 3~ 60Hz VDH1100690 CS 100 -20...15 83 4.0 3/4" 18 10 9.5 7.5 4.5 - 70 31.5 x 33.5 x 65.6 460V 3~ 60Hz VDH4100106 CS 100-H -20...85 83 3.7 3/4" 18 10 9.5 7.5 4.5 5.5 70 31.5 x 33.5 x 65.6 460V 3~ 60Hz VDH1100688 CS 200 -20...15 125 4.2 1" 28 20 18 15 9.5 - 78 55.1 x 39.4 x 70.9 460V 3~ 60Hz VDH4100091 CS 200-H -20...85 125 4.2 1" 28 20 18 15 9.5 5.5 78 55.1 x 39.4 x 70.9 460V 3~ 60Hz
$21,423.45 - $79,281.34
HUBER KISS 202C Heating Circulation
HUBER KISS 202C Heating Circulation (Please Note: There is a 6 weeks lead time) Heating circulation thermostats are specially designed for temperature control of externally attached applications with a small volume. The units are fitted with bath tanks made of stainless steel or polycarbonate. The thermostats have M16x1 pump connections at the rear side as well as a stainless steel bath cover with a filling opening. All models are fitted with an overtemperature and low level protection system according to safety class III/FL (DIN 12876) for use with flammable fluids. A powerful circulation pump ensures optimal heat transfer to external attached applications. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge). KISS temperature controller Bright, large OLED display Simple operation with menu navigation Simultaneous display of setpoint, Tmin, Tmax and actual temperature Status displays for pump, cooling and heating Overtemperature and low level protection Safety class III/FL (DIN 12876) USB and RS232 interfaces Autostart function for power failure 3 colour versions available: grey (standard), blue, red Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range (-30) 45...200 °C Temperature stability ±0,05 °C Temperature display OLED Display Alarm message optical, acoustical Controller KISS Safety class III / FL Protection class IP20 Dimensions (W x D x H) 178 x 260 x 355 mm | 7.01 x 10.24 x 13.98 inches Weight 8 kg | 17.64 pounds Heating / Cooling Capacity Heating capacity 1 - 1,5 kW Circulation Pump Pressure pump max. 14 lpm ; 0.25 bar | 3.7 gpm ; 3.62 psi Suction pump max. 10.5 lpm ; 0.17 bar | 2.77 gpm ; 2.47 psi Pump connection M16x1 AG male Connections Digital interface USB, RS232 Operating Data Old Sku 2039.0010.98 Permissible ambient temp. 5 to 40 °C Bath opening WxD/BD Ø = 25 / 150 mm | Ø = 0.98 / 5.91 inches Bath volume 2 Liters | 0.53 gal Power supply 100-115V 1~ 50/60Hz Current max 15 A Fusing 15 A
$4,853.07 - $5,581.76
HUBER KISS K6 Refrigerated Heating Bath
HUBER KISS K6 Refrigerated Heating Bath ( Please Note: There is a shipping lead time 2-3 weeks ) The Kiss K6 Refrigerated Heating Baths is ideal for a variety of heating and cooling tasks in research and industry such as sample temperature control, materials testing, quality control, analyses, etc. This unit consist of a stainless steel bath, immersion thermostat, pressure and suction pump with wetted materials made from industrial plastic or stainless steel, and air cooled refrigeration unit. In addition, the cooling circulators include automatic refrigeration capacity adjustment which reduces energy consumption and waste heat down to the absolute essential. New KISS controller combines state-of-the-art technology with stylish design. The simple to navigate menu makes operating these baths as easy as pushing a few buttons. Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range -25 to 200 °C Temperature stability ±0.05 °C Temperature Display OLED Display Alarm message optical, acoustical Controller KISS Safety class III / FL Protection class IP20 Dimensions (W x D x H) 210 x 400 x 546 mm | 8.27 x 15.75 x 21.5 inches Weight 25 kg | 55.12 pounds Heating / Cooling Capacity Heating capacity 1,5 kW Cooling capacity 20 0 -10 -20 °C0,2 0,15 0,1 0,05 kW Cooling machine air-cooled Refrigerant R290 (A3, H220) (0,047 kg) Circulation Pump Pressure pump max. 14 lpm ; 0.25 bar | 3.7 gpm ; 3.62 psi Suction pump max. 10.5 lpm ; 0.17 bar | 2.77 gpm ; 2.47 psi Pump connection M16x1 AG male Connections Digital interface USB, RS232 Operating Data Old sku 2008.0023.99 Permissible ambient temp. 5 to 40 °C Bath opening W x D / BD 5.51 x 4.72 / 5.91 inches Bath volume 4.5 Liters | 1.19 gal Power supply 110-120V 1~ 50/60Hz Current max. 15 + 3,2 A
$9,574.97 - $10,303.66
Huber Minichiller 600 OLÉ
Huber Minichiller 600 OLÉ (Please Note: There is a 2 -3 weeks lead time) Description: The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are available as both air and water cooled models and use natural refrigerants. The new OLÉ controller combines state-of-the-art technology with simple operation. OLÉ models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge) Environmentally-friendly, economic cooling solution High efficiency Precise temperature control Simple operation with menu navigation Robust stainless construction Reliable continuously operation with warning functions Easy to fill and empty Illuminated filling level indicator Bright, large OLED display USB and RS232 interfaces Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Temperature range -20...40 °C Temperature stability ±0.5 °C Temperature Display OLED Display Display resolution 0.1 °C Alarm message optical, acoustical Controller OLÉ Safety class I / NFL Protection class IP20 Dimensions (W x D x H) 280 x 490 x 424 mm | 11.02 x 19.29 x 16.69 inches Weight 36 kg | 79.38 pounds Heating / Cooling Capacity Cooling capacity 15 0 -10 -20 ° C0,6 0,5 0,35 15 kW Cooling machine air-cooled Refrigerant R290 (A3, H220) (0,085 kg) Circulation Pump Pressure pump max. 24 lpm ; 0.7 bar | 6.34 gpm ; 10.15 psi Suction pump max. 18 lpm ; 0.4 bar | 4.76 gpm ; 5.8 psi Pump connection M16x1 AG male Connections Digital interface USB, RS232 Operating Data Old sku 3006.0097.98 Noise Level 56 dB(A) Filling Volume min 2.8 Liters | 0.74 gal Volume of expansion 2.2 Liters | 0.58 gal Power supply 110-120V 1~ 60Hz Current max. 8,5 A
$10,187.07 - $10,915.76
Huber Minichiller 600w OLÉ
Huber Minichiller 600w OLÉ Description: The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are available as both air and water cooled models and use natural refrigerants. The new OLÉ controller combines state-of-the-art technology with simple operation. OLÉ models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge). Environmentally-friendly, economic cooling solution High efficiency Precise temperature control Simple operation with menu navigation Robust stainless construction Reliable continuously operation with warning functions Easy to fill and empty Illuminated filling level indicator Bright, large OLED display USB and RS232 interfaces Natural refrigerant General Information & Temperature Controller Temperature range -20...40 °C Temperature stability ±0.5 °C Temperature Display OLED Display Display resolution 0.1 °C Alarm message optical, acoustical Controller OLÉ Safety class I / NFL Protection class IP20 Dimensions (W x D x H) 280 x 490 x 424 mm | 11.02 x 19.29 x 16.69 inches Weight 36 kg | 79.38 pounds Heating / Cooling Capacity Cooling capacity 15 0 -10 -20 ° C0,6 0,5 0,35 0,15 kW Cooling machine water-cooled Refrigerant R290 (A3, H220) (0,085 kg) Circulation Pump Pressure pump max. 24 lpm ; 0.7 bar | 6.34 gpm ; 10.15 psi Suction pump max. 18 lpm ; 0.4 bar | 4.76 gpm ; 5.8 psi Pump connection M16x1 AG male Connections Digital interface USB, RS232 Operating Data Old sku 3006.0127.98 Filling Volume min 2.8 Liters | 0.74 gal Volume of expansion 2.2 Liters | 0.58 gal Cooling water connection G1/2 AG Cooling water consumption 24 l/h Cooling water differential pressure min. 3 bar | 43.5 psi Cooling water pressure max. 6 bar | 87 psi Power supply 110-120V 1~ 60Hz Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C. Please observe the notes on installation and/or the space requirements of our products. The following voltage and frequency tolerances apply based on EN60034-1:Voltage +/- 5% for a frequency tolerance at the same time of +/- 2% Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency. This equipment is compliant to US-SNAP and all applicable EU laws. The US-SNAP end-use for this equipment is the industrial process refrigeration. Certification by a Notified Body upon request. We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.
$10,915.76 - $11,644.45
Huber Ministat with Pilot ONE
Huber Ministat with Pilot ONE (Please Note: There is a 2 week lead time) Huber Ministats are the smallest cooling circulator in the world. Their small dimensions allow Ministats to be placed in the smallest of spaces, for example in a laboratory fume cupboard or inside technical plant. Despite their minimal size the systems are extensively fitted out and offer sufficient performance for temperature control of photometers, refractometers, viscometers, distillation apparatus, reaction vessels and mini-plants. The main applications are using external applications however the bath opening allows objects to be thermoregulated directly in a thermostat bath. A powerful pressure/suction pump with an infinitely controlled rotational speed ensures optimal circulation. The maximum pressure can also be regulated by an optional pressure sensor, meaning that sensitive glass reactors and apparatus can reliably be protected from breakage. Pilot ONE controller with Plug & Play technology Precise temperature control 5.7“ touchscreen and comfortable menu navigation Overtemperature and low level protection Safety class III/FL (DIN 12876) Powerful pressure/suction pump Programmer with calendar and clock functions 2-point calibration Download Ministat 125 Data Sheet Download Ministat 125w Data Sheet Download Ministat 230 Data Sheet Download Ministat 230w Data Sheet Download Ministat 240 Data Sheet Download Ministat 240w Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General Information & Temperature Controller Huber Ministat 125 Huber Ministat 125w Huber Ministat 230 Huber Ministat 230w Huber Ministat 240 Huber Ministat 240w Temperature range -25...150 °C -25...150 °C -40...200 °C -40...200 °C -45...200 °C -45...200 °C Temperature stability ±0.02 °C ±0.02 °C ±0.05 °C ±0.02 °C ±0.02 °C ±0.02 °C Temperature Control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Pilot ONE(E-grade "Basic") Safety class III / FL III / FL III / FL III / FL III / FL III / FL Protection class IP20 IP20 IP20 IP20 IP20 IP20 Dimensions (W x D x H) 8.86 x 14.57 x 16.89 in 8.86 x 14.57 x 16.89 in 10.04 x 17.72 x 18.74 in 10.04 x 17.72 x 18.74 in 11.81 x 18.31 x 20.31 inches 11.81 x 18.31 x 20.31 inches Weight 55.12 pounds 55.12 pounds 81.59 pounds 86 pounds 97.02 pounds 97.02 pounds Heating / Cooling Capacity Heating capacity 1 kW 1 kW 1,6 - 2,1 kW 1,5 kW 1,6 kW 1,6 kW Cooling capacity 100 20 0 -10 -20 °C0,3 0,3 0,21 0,15 0,05 kW 100 20 0 -10 -20 °C0.3 0,3 0,2 0,15 0,1 kW 100 20 0 -10 -20 -40 °C0,42 0,42 0,38 0,33 0,25 0,05 kW 100 20 0 -10 -20 -40 °C0,42 0,42 0,38 0,33 0,25 0,05 kW 100 20 0 -10 -20 -40 °C0,6 0,6 0,55 0,42 0,35 0,05 kW 100 20 0 -10 -20 -40 °C0,6 0,6 0,55 0,42 0,35 0,05 kW Cooling machine air-cooled water-cooled air-cooled water-cooled air-cooled water-cooled Refrigerant R290 (A3, H220) (0,066 kg) R290 (A3, H220) (0,06 kg) R290 (A3, H220) (0,099 kg) R290 (A3, H220) (0,06 kg) R290 (A3, H220) (0,099 kg) R290 (0,06 kg) Circulation Pump Pressure pump max. 22 lpm ; 0.7 bar 5.81 gpm ; 101.5 psi 22 lpm ; 0.7 bar5.81 gpm ; 101.5 psi 22 lpm ; 0.7 bar | 5.81 gpm ; 10.15 psi 22 lpm ; 0.7 bar | 5.81 gpm ; 10.15 psi 22 lpm ; 0.7 bar | 5.81 gpm ; 10.15 psi 22 lpm ; 0.7 bar5.81 gpm ; 101.5 psi Suction pump max. 16 lpm ; 0.4 bar4.23 gpm ; 58 psi 16 lpm ; 0.4 bar4.23 gpm ; 58 psi 16 lpm ; 0.4 bar4.23 gpm ; 58 psi 16 lpm ; 0.4 bar | 4.23 gpm ; 5.8 psi 16 lpm ; 0.4 bar | 4.23 gpm ; 5.8 psi 16 lpm ; 0.4 bar4.23 gpm ; 58 psi Pump connection M16x1 AG male M16x1 AG male M16x1 AG male M16x1 AG male M16x1 AG male M16x1 AG male Permissible viscosity 50 mm²/s 50 mm²/s 50 mm²/s 50 mm²/s 50 mm²/s 50 mm²/s Connections Digital interface Pt100 Pt100 Pt100 Pt100 Pt100 Pt100 Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Operating Data Permissible ambient temp. 5...35 °C 5...40 °C 5 to 40 °C 5 to 40 °C 5 to 40 °C 5 to 40 °C Noise level - - 59 dB(A) - - Bath opening W x D / BD 178 x 80 / 120 mm | 7.01 x 3.15 / 4.72 inches 178 x 80 / 120 mm | 7.01 x 3.15 / 4.72 inches 170 x 85 / 135 mm | 6.69 x 3.35 / 5.31 inches 170 x 85 / 135 mm | 6.69 x 3.35 / 5.31 inches 205 x 85 / 157 mm | 8.07 x 3.35 / 6.18 inches 205 x 85 / 157 mm | 8.07 x 3.35 / 6.18 inches Bath volume 2.75 Liters | 0.73 gal 2.75 Liters | 0.73 gal 3.2 Liters | 0.85 gal 3.2 Liters | 0.85 gal 4.9 Liters | 1.29 gal 4.9 Liters | 1.29 gal Filling volume min 2 Liters | 0.53 gal 2 Liters | 0.53 gal 2.8 Liters | 0.74 gal 2.8 Liters | 0.74 gal 4.5 Liters | 1.19 gal 4.5 Liters | 1.19 gal Cooling water connection - G1/2 AG - G1/2 AG - G1/2 AG Cooling water differential pressure min. - 2 bar | 29 psi - 2 bar | 29 psi - 2 bar | 29 psi Cooling water pressure max. - 6 bar | 87 psi - 6 bar | 87 psi - 6 bar | 87 psi Power supply 110-120V 1~ 60Hz 110-120V 1~ 60Hz 208-240V 1~/2~ 50/60Hz 110-120V 1~ 60Hz 208V 2~ 60Hz 208V 2~ 60Hz Current max. 11,5 A 11,5 A 14 A 14 A 10,5 A - Fusing 16 A 16 A 16 A 16 A 2x16 A -
$15,156.73 - $20,184.68
Huber TC100
Huber TC100 (Please Note: There is up to 2 -3 weeks Shipping lead time) The TC range of immersion coolers are a flexible solution for a variety of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. FEATURES: Universal solution for many cooling tasks Rapid cooling of fluids Ideal for counter-cooling or as a replacement of dry ice LED temperature display Easy operation with only three keys Compact, space-saving construction Robust housing with carrying grips High quality stainless steel immersion probe General information & temperature controller Model Sku / Power Supply 3005.0129.00 208V 2~ 60Hz 3005.0131.00 110-120V 1~ 50/60Hz Temperature range -100...40 °C -100...40 °C Controller ON-OFF-Regler ON-OFF-Regler Safety class I / NFL I / NFL Dimensions (W x D x H) 295 x 500 x 570 mm | 11.61 x 19.69 x 22.44 inches 11.61 x 19.69 x 22.44 inches Weight 61 kg | 134.5 pounds 134.5 pounds Heating / cooling capacity Cooling capacity 0 -20 -50 -60 -80 -90 -100 0,16 0,15 0,13 0,12 0,12 0,07 0,01 kW 0 -20 -50 -60 -80 -90 -100 0,16 0,15 0,13 0,12 0,12 0,07 0,01 kW Cooling machine air-cooled air-cooled Refrigerant 1. stage (ASHRAE, GHS) R452A (A1, H280) (0,26 kg) R452A (A1, H280) (0,26 kg) Refrigerant 2. stage (ASHRAE, GHS) R1150 (A3, H220) (0,056 kg) R1150 (A3, H220) (0,056 kg) Operating data Permissible ambient temp. 5...40 °C 5...40 °C Power supply 208V 2~ 60Hz 110-120V 1~ 50/60Hz Current max. 6,5 A - Miscellaneous Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C. Please observe the notes on installation and/or the space requirements of our products. The following voltage and frequency tolerances apply based on EN60034-1:Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%. Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.This equipment is compliant to US-SNAP and all applicable EU laws. The US-SNAP end-use for this equipment is the industrial process refrigeration. Certification by a Notified Body upon request.We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original. Click here to see Warranty Data sheet 3005.0129.00 Data Sheet 3005.0131.00
$21,569.19 - $22,297.88
Huber Unichill 300T
Huber Unichiller 300T (Please Note: There is a 2 -3 weeks lead time) Description: Huber Unichillers offer better efficiency, stable pressure and delivery performance with a constant cooling water temperature compared to traditional tap water cooling. Chillers also reduce water consumption and help conserve the environment whilst lowering operating costs. Unichillers are suitable for the removal of heat from chemical processes, cooling technical plants or as a central cooling water supply for laboratories. All Unichillers are designed for continual operation at ambient temperatures up to +40°C. Installation in an outside areas is possible with optional weather protection and winter operation packages. Pumps are available with an extended pressure and flow rate for applications with a high pressure drops. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favorites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Environmentally-friendly, economic cooling solution High efficiency Precise temperature control Powerful circulation pump Intelligent energy management Reliable continuously operation with warning functions Pilot ONE controller with 5.7" touchscreen Digital filling level indicator 2 x USB (Host and Device), Ethernet and RS232 interfaces Heater options available Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products. General information & temperature controller Temperature range -20...40 °C Temperature stability ±0.5 °C Controller Pilot ONE (E-grade "Basic") Safety class I / NFL Protection class IP20 Dimensions (W x D x H) 905 x 2172 x 1900 mm | 35.63 x 85.51 x 74.8 inches Weight -- kg | pounds Heating / cooling capacity Cooling capacity 15 0 -10 -20 °C ____________ 30 18 11 6 kW Cooling machine air-cooled Refrigerant (ASHRAE, GHS) R449A (A1, H280) Circulation pump Pressure pump max. 210 lpm ; 4.7 bar | 55.48 gpm ; 68.15 psi Pump connection G1 1/4 AG male Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating data Old Sku 3020.0027.01 Permissible ambient temp. 5...40 °C Filling volume min. 14 Liters | 3.7 gal Volume of expansion 39 Liters | 10.3 gal Power supply 460V 3~ 60Hz
$187,418.76 - $188,147.45
Huber Unichiller 500Tw
Huber Unichiller 500Tw (Please Note: There is a 2 -3 weeks lead time) Description: Huber Unichillers offer better efficiency, stable pressure and delivery performance with a constant cooling water temperature compared to traditional tap water cooling. Chillers also reduce water consumption and help conserve the environment whilst lowering operating costs. Unichillers are suitable for the removal of heat from chemical processes, cooling technical plants or as a central cooling water supply for laboratories. All Unichillers are designed for continual operation at ambient temperatures up to +40°C. Installation in an outside areas is possible with optional weather protection and winter operation packages. Pumps are available with an extended pressure and flow rate for applications with a high pressure drops. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favorites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Environmentally-friendly, economic cooling solution High efficiency Precise temperature control Powerful circulation pump Intelligent energy management Reliable continuously operation with warning functions Pilot ONE controller with 5.7" touchscreen Digital filling level indicator 2 x USB (Host and Device), Ethernet and RS232 interfaces Heater options available Download Data Sheet Click Here 3 Year Warranty Register Please observe the notes on installation and/or the space requirements of our products General information & temperature controller Temperature range -20...40 °C Temperature stability ±0.5 °C Controller Pilot ONE (E-grade "Basic") Safety class I / NFL Protection class IP20 Dimensions (W x D x H) 1000 x 1100 x 1635 mm | 39.37 x 43.31 x 64.37 inches Weight -- kg | pounds Heating / cooling capacity Cooling capacity 15 0 -10 -20 °C_______________ 50 30 24 14 kW Cooling machine water-cooled Refrigerant (ASHRAE, GHS) R449A (A1, H280) Circulation pump Pressure pump max. 234 lpm ; 4.9 bar | 61.82 gpm ; 71.05 psi Pump connection G1 1/4 AG male Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating data Old Sku 3030.0003.01 Permissible ambient temp. 5...40 °C Filling volume min. 12.7 Liters | 3.36 gal Volume of expansion 7 Liters | 1.85 gal Cooling water connection G1 1/4 AG Cooling water differential pressure min. 1,5 bar | 217.5 psi Cooling water pressure max. 6 bar | 87 psi Power supply 460V 3~ 60Hz
$217,440.74 - $218,169.43
Huber Unichiller P022 with Pilot ONE
Huber Unichiller P022 with Pilot ONE Huber Unichillers offer better efficiency, stable pressure and delivery performance with a constant cooling water temperature compared to traditional tap water cooling. Chillers also reduce water consumption and help conserve the environment whilst lowering operating costs. Unichillers are suitable for the removal of heat from chemical processes, cooling technical plants or as a central cooling water supply for laboratories. All Unichillers are designed for continual operation at ambient temperatures up to +40°C. Installation in an outside areas is possible with optional weather protection and winter operation packages. Pumps are available with an extended pressure and flow rate for applications with a high pressure drops. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Features Environmentally-friendly, economic cooling solution High efficiency Precise temperature control Powerful circulation pump Robust stainless construction Reliable continuously operation with warning functions Easy to fill and empty Adjustable bypass, level indicator with sight glass and digital manometer Pilot ONE controller with 5.7" touchscreen 2 x USB (Host and Device), Ethernet and RS232 interfaces General information & temperature controller Temperature range -10...40 °C Temperature stability ±0.5 °C Temperature Control TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C Alarm message optical, acoustical Controller Pilot ONE (E-grade "Professional") Safety class I / NFL Protection class IP20 Dimensions (W x D x H) 18.11 x 23.23 x 29.25 inches Weight 176.4 pounds Heating / cooling capacity Cooling capacity 15 0 -10 C2,2 1,6 1 kW Cooling machine air-cooled Refrigerant (ASHRAE, GHS) R507 (A1, H280) (0,64 kg) Circulation pump Pressure pump max. 25 lmp ; 2.5 bar / 6.6 gpm ; 36.25 psi Pump connection G3/4 AG male Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating data Permissible ambient temp. 5...40 °C Filling volume min. 3.8 Liters / 1 gal Volume of expansion 1.7 Liters / 0.45 gal Power supply 208V 2~ 60Hz Current max. 10 A Miscellaneous Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C. Please observe the notes on installation and/or the space requirements of our products. The following voltage and frequency tolerances apply based on EN60034-1: Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%. Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.This equipment is compliant to US-SNAP and all applicable EU laws. The US-SNAP end-use for this equipment is the industrial process refrigeration. Certification by a Notified Body upon request.We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original. Click here to see Warranty Data Sheet
$30,167.72
HUBER Unistat 815 Dynamic Temperature Control / Circulation Thermostat
HUBER Unistat 815 Dynamic Temperature Control (Please Note: There is a 2 - 3 weeks lead time) Unistat Circulators are an ideal solution for fast and precise thermal control of externally connected applications. These systems offer rapid temperature change and a wide temperature range without having to change fluid. The new Pilot ONE controller features a navigation system with easily remembered icons and menus which are sorted by color to make routine work simpler. An amazing software guides you through your set up ensuring all the necessary settings are correct. Unistat 815 208V Data sheet Unistat 815 460V Data sheet 3 Year Warranty Extension General Information & Temperature Controller Unistat 815208V Unistat 815460V Temperature range -85...250 °C -85...250 Temperature stability ±0.01 °C ±0.01 Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Alarm message optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL Protection class IP20 IP20 Dimensions (W x D x H) 18.11 x 23.78 x 65.55 inches 18.11 x 23.78 x 57.68 inches Weight 331 kg | 729.86 pounds 229 kg | 504.94 pounds Heating / Cooling Capacity Heating capacity 2 kW 2,6 kW Cooling machine air-cooled air-cooled Refrigerant 1. stage R452A (A1, H280) (1,8 kg) R452A (A1, H280) (1,8 kg) Refrigerant 2. stage R23 (A1, H280) (0,39 kg) R23 (A1, H280) (0,39 kg) Circulation Pump Pressure pump max. 40 lpm ; 0.9 bar | 10.57 gpm ; 13.05 psi 40 lpm ; 0.9 bar | 10.57 gpm ; 13.05 psi Pump connection M30x1,5 AG male M30x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Analogue input via optional Com.G@te via optional Com.G@te Analogue output via optional Com.G@te via optional Com.G@te Operating Data Old Sku 1014.0054.01 1014.0055.01 Permissible ambient temp. 5 to 40 °C 5 to 40 °C Noise Level 64 dB(A) 64 dB(A) Filling volume min. 3.8 Liters / 1 gal 3.8 Liters / 1 gal Volume of expansion 3.3 Liters / 0.87 gal 3.3 Liters / 0.87 gal Power supply 208V 3~ 60Hz 460V 3~ 60Hz Current max 21,5 A 11 A
$80,957.33 - $92,179.13
HUBER Unistat 825 Dynamic Temperature Control / Circulation Thermostat
HUBER Unistat 825 Dynamic Temperature Control (Please Note: There is a 2 weeks Shipping lead time) Unistat Circulators are an ideal solution for fast and precise thermal control of externally connected applications. These systems offer rapid temperature change and a wide temperature range without having to change fluid. The new Pilot ONE controller features a navigation system with easily remembered icons and menus which are sorted by color to make routine work simpler. An amazing software guides you through your set up ensuring all the necessary settings are correct. General Information & Temperature Controller Unistat 825208V Unistat 825460V Temperature range -85...250 °C -85...250 Temperature stability ±0.01 °C ±0.01 Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C 0.01 °C Alarm message optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL Protection class IP20 IP20 Dimensions (W x D x H) 18.11 x 23.78 x 65.55 inches 18.11 x 23.78 x 57.68 inches Weight 696.78 Lb 487.3 Lb Heating / Cooling Capacity Heating capacity 3 kW 4 kW Cooling machine air-cooled air-cooled Refrigerant 1. stage R507 (1,8 kg) R507 (1,8 kg) Refrigerant 2. stage R23 R23 Circulation Pump Pressure pump max. 10.57 gpm ; 13.05 psi 10.57 gpm ; 13.05 psi Pump connection M30x1,5 AG male M30x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Operating Data Permissible ambient temp. 5 to 40 °C 5 to 40 °C Noise level 64 dB(A) 64 dB(A) Filling volume min. 2.9 Liters / 0.77 gal 2.9 Liters / 0.77 gal Volume of expansion 3.6 Liters / 0.95 gal 3.6 Liters / 0.95 gal Power supply 208V 3~ 60Hz 460V 3~ 60Hz Current max 20 A 14,5 A
$115,642.91 - $127,374.80
HUBER Unistat 905 Dynamic Temperature Control / Circulation Thermostat
HUBER Unistat 905 Dynamic Temperature Control (Please Note: There is 8 week shipping lead time) Disclaimer: This item is Non-Refundable once ordered. Unistat Circulators are an ideal solution for fast and precise thermal control of externally connected applications. These systems offer rapid temperature change and a wide temperature range without having to change fluid. The new Pilot ONE controller features a navigation system with easily remembered icons and menus which are sorted by color to make routine work simpler. An amazing software guides you through your set up ensuring all the necessary settings are correct. Unistat 905 208V Data sheet Unistat 905 460V Data sheet General Information & Temperature Controller Unistat 905 208V Unistat 905 460V Temperature range -90 to 250 °C -90 to 250 °C Temperature stability ±0.01 °C ±0.01 Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C 0.01 °C Alarm message optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL Protection class IP20 IP20 Dimensions (W x D x H) 540 x 654 x 1738 mm | 21.26 x 25.75 x 68.43 inches 540 x 654 x 1500 mm | 21.26 x 25.75 x 59.06 inches Weight 396 kg | 873.18 pounds 275 kg | 606.38 pounds Heating / Cooling Capacity Heating capacity 6 kW 6 kW Cooling machine air-cooled air-cooled Refrigerant 1. stage R452A (A1, H280) (2,5 kg) R452A (A1, H280) (2,5 kg) Refrigerant 2. stage R23 (A1, H280) (0,75 kg) R23 Circulation Pump Pressure pump max. 48 lpm ; 0.9 bar | 12.68 gpm ; 13.05 psi 10.57 gpm ; 13.05 psi Pump connection M30x1,5 AG male M30x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Analogue input via optional Com.G@te via optional Com.G@te Analogue output via optional Com.G@te via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Operating Data Old sku 1035.0013.01 1035.0014.01 Permissible ambient temp. 5...35 °C 5...35 °C Filling volume min. 3.2 Liters | 0.85 gal 3.2 Liters | 0.85 gal Volume of expansion 5.3 Liters | 1.4 gal 5.3 Liters | 1.4 gal Power supply 208V 3~ 60Hz 460V 3~ 60Hz Current max 40 A 23,5 A
$148,506.78 - $165,849.57
Huber Unistat 915w with Pilot ONE
Huber Unistat 915w with Pilot ONE (Please Note: There is a 2 - 3 weeks lead time) Unistat Circulators are an ideal solution for fast and precise thermal control of externally connected applications. These systems offer rapid temperature change and a wide temperature range without having to change fluid. The new Pilot ONE controller features a navigation system with easily remembered icons and menus which are sorted by color to make routine work simpler. An amazing software guides you through your set up ensuring all the necessary settings are correct. Precise and reproducible temperature control results Fastest heating and cooling rate Wide temperature ranges with no fluid change Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation Adaptive temperature control, self-optimising Efficient circulation pump Data communication via LAN, internet, USB, RS232 and RS485 Efficient operation saves working time and operating costs Proven functionality for the process industry E-grade "Professional" included Download Data Sheet Click Here for 3 Year Warranty Online Registration Download Operating Manual General information & Temperature Controller Temperature range -90...250 °C Temperature stability ±0.02 °C ±0.01 °C Temperature control TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C Alarm message optical, acoustical Controller Pilot ONE (E-grade "Professional") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 630 x 704 x 1565 mm | 24.8 x 27.72 x 61.61 inches Weight 364 kg | 802.62 pounds Heating / Cooling Capacity Heating capacity 6 kW Cooling capacity 250 200 100 0 -20 -40 -60 -80 -90 °C 6,5 7,5 9 11 11 11 8,2 4,2 1,3 0,6 kW Cooling machine water-cooled Refrigerant 1. stage R507 (A1, H280) (2,9 kg) Refrigerant 2. stage R23 (A1, H280) (1,23 kg) Circulation Pump Pressure pump max. 110 lpm ; 1.5 bar | 29.06 gpm ; 21.75 psi Pump Connection M30x1,5 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old sku 1055.0011.01 Permissible ambient temp. 5...40 °C Noise level 64 dB(A) Filling volume min. 3.9 Liters | 1.03 gal Volume of expansion 6.5 Liters | 1.72 gal Cooling water connection G3/4 AG Cooling water differential pressure min. 1 bar | 14.5 psi Cooling water pressure max. 6 bar | 87 psi Power supply 460V 3~ 60Hz Current max. 29 A
$192,228.11 - $192,956.79
Huber Unistat 950w with Pilot ONE
Huber Unistat 950w with Pilot ONE (Please Note: There is up to 2-3 weeks Shipping lead time) he Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen colour display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapours and oxidation, further saving resources. Unistats are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favourites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. FEATURES Precise and reproducible temperature control results Fastest heating and cooling rates Wide temperature ranges with no fluid change Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation Adaptive temperature control, self-optimising Efficient circulation pump Data communication via LAN, internet, USB, RS232 and RS485 Efficient operation saves working time and operating costs Proven functionality for the process industry E-grade "Professional" included General information & temperature controller Temperature range -90...200 °C Temperature stability ±0.01 °C Temperature control TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C Alarm message optical, acoustical Controller Pilot ONE (E-grade "Professional") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 103.54 x 51.18 x 77.95 inches Weight 4,882.0 pounds Heating / cooling capacity Heating capacity 36 kW Cooling capacity 200 100 20 0 -20 -40 -60 -80 36 36 36 36 36 36 25 10 kW Cooling machine water-cooled Refrigerant 1. stage (ASHRAE, GHS) R452A (A1, H280) Refrigerant 2. stage (ASHRAE, GHS) R23 (A1, H280) (7 kg) Circulation pump Pressure pump max. 240 lpm ; 4 bar | 63.41 gpm ; 58 psi Pump connection Flansch DN40 PN10/40 EN1092-1 Permissible viscosity 100 mm²/s Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating data Permissible ambient temp. 5...40 °C Filling volume min. 30 Liters | 7.93 gal Volume of expansion 90 Liters | 23.78 gal Cooling water connection G1 1/4 AG Cooling water differential pressure min. 3 bar | 43.5 psi Cooling water pressure max. 6 bar | 87 psi Power supply 460V 3~ 60Hz Miscellaneous Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C. Please observe the notes on installation and/or the space requirements of our products. The following voltage and frequency tolerances apply based on EN60034-1:Voltage +/- 5% for a frequency tolerance at the same time of +/- 2% Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.This equipment is compliant to US-SNAP and all applicable EU laws. The US-SNAP end-use for this equipment is the industrial process refrigeration. Certification by a Notified Body upon request.We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original. Click here to see Warranty Data Sheet Operation Manual
$746,323.07
HUBER Unistat T305 with Pilot ONE
HUBER Unistat T305 with Pilot ONE (Please Note: There is a 2 - 3 weeks lead time) The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Because Unistats are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapours and oxidation, further saving resources. Unistats are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated. Data sheet 3 Year Warranty Extension General Information & Temperature Controller Temperature range 65...300 °C Temperature stability ±0,02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 425 x 250 x 631 mm | 16.73 x 9.84 x 24.84 inches Weight 37 kg | 81.59 pounds Heating / Cooling Capacity Heating capacity 4,8 kW Circulation Pump Pressure pump max. 45 lpm ; 0.9 bar | 11.89 gpm ; 13.05 psi Pump connection M24x1,5 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old sku 1003.0022.01 Permissible ambient temp. 5 to 40 °C Filling volume min. 1.45 Liters | 0.38 gal Volume of expansion 2.8 Liters | 0.74 gal Power supply 208V 3~ 60Hz Current max. 15 A Fusing 15,5 A
$33,228.21 - $33,956.90
Huber Unistat Tango with Pilot ONE
Huber Unistat Tango with Pilot ONE (Please Note: There is 2-3 weeks Shipping lead time) Unistats are predestined for applications in process and chemical engineering, such as temperature control of reactors, autoclaves, Miniplant/Pilot systems, reactor blocks and calorimeters. Unistat temperature control systems with their unique thermodynamics provide highly accurate and reproducible results, guaranteeing the shortest heating and cooling times and a wide temperature range without fluid change. Environmentally and economically Unistats stand out, offering natural refrigerants and an efficient energy management system for reduced operating costs. . Precise and reproducible temperature control results Fastest heating and cooling rates Wide temperature ranges with no fluid change Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation Adaptive temperature control, self-optimising Efficient circulation pump 2 x USB (Host and Device), Ethernet and RS232 interfaces Efficient operation saves working time and operating costs Proven functionality for the process industry E-grade "Professional" included Download Data sheet Unistat tango Download Data Sheet Unistat tango w Download Data Sheet Unistat tango wl Operating Manual Click here 3 year Warranty Register General Information & Temperature Controller Unistat Tango Unistat Tango w Unistat Tango wl Temperature range -45...250 °C -45...250 °C -45...250 °C Temperature stability ±0.01 °C ±0.01 ±0.01 °C Temperature control TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) TAC, self-optimizing (True Adaptive Control) Display resolution 0.01 °C 0.01 °C 0.01 °C Alarm message optical, acoustical optical, acoustical optical, acoustical Controller Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Pilot ONE (E-grade "Professional") Safety class III / FL III / FL III / FL Protection class IP20 IP20 IP20 Dimensions (W x D x H) 16.77 x 12.87 x 24.84 inches 16.77 x 12.87 x 24.84 inches 16.77 x 12.87 x 24.84 inches Weight 141.12 pounds 119.07 pounds 132.3 pounds Heating / Cooling Capacity Heating capacity 3 kW 3 kW 3 kW Cooling capacity 250 200 100 0 -20 -40 °C0,7 0,7 0,7 0,7 0,4 0,06 kW 250 200 100 0 -20 -40 °C0,7 0,7 0,7 0,7 0,4 0,06 kW 250 200 100 0 -20 -40 °C0,7 0,7 0,7 0,7 0,4 0,06 kW Cooling machine air-cooled water-cooled air- and water-cooled Refrigerant R1270 (0,15 kg) R1270 (0,09 kg R1270 (0,15 kg) Circulation Pump Pressure pump max. 55 lpm ; 0.9 bar | 14.53 gpm ; 13.05 psi 55 lpm ; 0.9 bar | 14.53 gpm ; 130.5 psi 55 lpm ; 0.9 bar | 14.53 gpm ; 130.5 psi Pump connection M24x1,5 AG male M24x1,5 AG male M24x1,5 AG male Permissible viscosity 50 mm²/s 50 mm²/s Connections Pt100 connection Pt100 Pt100 Pt100 Analogue input via optional Com.G@te via optional Com.G@te via optional Com.G@te Analogue outpu via optional Com.G@te via optional Com.G@te via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host RS232, Ethernet, USB Device, USB Host Operating Data Permissible ambient temp. 5 to 40 °C 5 to 40 °C 5 to 40 °C Noise level 62 dB(A) - 62 dB(A) Filling volume min. 1.5 Liters | 0.4 gal 1.5 Liters | 0.4 gal 1.5 Liters | 0.4 gal Volume of expansion 2.8 Liters | 0.74 gal 2.8 Liters | 0.74 gal 2.8 Liters | 0.74 gal Cooling water connection - G1/2 AG G1/2 AG Cooling water consumption - 24 l/h 30 l/h Cooling water differential pressure min. - 0,5 bar | 72.5 psi 0,5 bar | 72.5 psi Cooling water pressure max. - 6 bar | 87 psi 6 bar | 87 psi Power supply 208V 2~ 60Hz 208V 2~ 60Hz 208V 2~ 60Hz Current max 18 A 16,5 A 17,5 A Fusing 20 A 2x20 A 2x20 A
$40,806.57 - $44,450.02
Julabo CORIO CD-200F
Julabo CORIO CD-200F Call for lead time Refrigerated / Heating Circulators of the new CORIO series distinguish themselves with a great price-to-performance ratio. They are ideal for all standard tasks and routine work in laboratories and industry. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over (internal and external circulation) External pump connections (M16x1) USB connection Space-saving cooling coil design yields more usable space in the bath tank Bath lid and drain tap included Removable ventilation grid Refrigeration unit without side vents Class III (FL) according to DIN 12876-1 Specifications Order No. 9012701 Model series CORIO Category Refrigerated - Heating Circulators Working temperature range (°C) -20 ... +150 Temperature control PID Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Cooling capacity (Medium Ethanol) °C 20 0 -20kW 0.22 0.17 0.06 Pump capacity flow rate (l/min) 15 Pump capacity flow pressure (psi) 5.08 Bath opening / bath depth (W x L / D inch) 5.1 x 5.9 / 5.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 3 ... 4 Refrigerant stage 1 R134a Filling volume refrigerant stage 1 (g) 70 Global Warming Potential for 1430 Carbon dioxide equivalent stage 1 (t) 0.1 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 9.1 x 15.4 x 25,6 Weight (LBS) 57.4 Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Bath tank Stainless steel Bath cover integrated Cooling of compressor Air Product Data Sheet Manual
$8,742.81
Julabo CORIO CP-1000F
Julabo CORIO CP-1000F Call for lead time Refrigerated Circulators from the CORIO CP range are suitable for applications with a temperature range up to +200°C. The enhanced pump performance ensures they are suitable for easy temperature control tasks in combination with external applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over (internal and external circulation) External pump connections (M16x1) USB & RS232 connection Space-saving cooling coil design yields more usable space in the bath tank Bath lid and drain tap included Removable ventilation grid Refrigeration unit without side vents Class III (FL) according to DIN 12876-1 Technical Data Order No. 9013707 Model series CORIO Category Refrigerated - Heating Circulators Working temperature range (°C) -50 ... +200 Temperature control PID Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Cooling capacity (Medium Ethanol) °C 20 10 0 -10 -20 -30 -40kW 1 1 0.9 0. 73 0.5 0.3 0.13 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 7.1 x 5.1 / 5.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 5 ... 7.5 Refrigerant stage 1 R449a Filling volume refrigerant stage 1 (g) 175 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 16.5 x 19.3 x 27.6 Weight (LBS) 113.5 Included with each unit 2 Schlaucholiven passend für Schlauch 8 und 12 mm l.W. (Pump enanschlüsse mit M16x1 Außengewinde) Bath tank Stainless steel Bath cover integrated Cooling of compressor Air Manual
$17,712.97
Julabo CORIO CP-1001F
Julabo CORIO CP-1001F Call for lead time Refrigerated Circulators from the CORIO CP range are suitable for applications with a temperature range up to +200°C. The enhanced pump performance ensures they are suitable for easy temperature control tasks in combination with external applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over (internal and external circulation) External pump connections (M16x1) USB & RS232 connection Space-saving cooling coil design yields more usable space in the bath tank Bath lid and drain tap included Removable ventilation grid Refrigeration unit without side vents Class III (FL) according to DIN 12876-1 Technical Data Order No. 9013708 Model series CORIO Category Refrigerated - Heating Circulators Working temperature range (°C) -38 ... +100 Temperature control PID Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Cooling capacity (Medium Ethanol) °C 20 10 0 -10 -20 -30 kW 1 0.95 0.9 0.6 0.6 0.12 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 13.8 x 16.1 x 11.8 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 42 ... 56 Refrigerant stage 1 R449a Filling volume refrigerant stage 1 (g) 170 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 17.7 x 25.2 x 37.4 Weight (LBS) 162.5 Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Bath tank Stainless steel Bath cover integrated Cooling of compressor Air Manual
$20,032.25
Julabo CORIO CP-201F
Julabo CORIO CP-201F Call for lead time Refrigerated Circulators from the CORIO CP range are suitable for applications with a temperature range up to +200°C. The enhanced pump performance ensures they are suitable for easy temperature control tasks in combination with external applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over (internal and external circulation) External pump connections (M16x1) USB & RS232 connection Space-saving cooling coil design yields more usable space in the bath tank Bath lid and drain tap included Removable ventilation grid Refrigeration unit without side vents Class III (FL) according to DIN 12876-1 Technical Data Order No. 9013702 Model series CORIO Category Refrigerated - Heating Circulators Working temperature range (°C) -20 ... +200 Temperature control PID Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0-1 °C Temperature Display LED Heating capacity (kW) 1 Cooling capacity (Medium Ethanol) °C 200 20 10 0 -10 -20 kW 0.2 0.2 0.17 0.15 0.1 0.02 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 5.1 x 5.9 / 5.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 3 ... 4 Refrigerant stage 1 R134a Filling volume refrigerant stage 1 (g) 70 Global Warming Potential for 1430 Carbon dioxide equivalent stage 1 (t) 0.1 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 17.3 x 16.1 x 17.3 Weight (LBS) 54.5 Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Bath tank Stainless steel Bath cover integrated Cooling of compressor Air Manual
$9,045.70
Julabo CORIO CP-BC12
Julabo CORIO CP-BC12 Call for lead time CORIO heating circulators feature professional technology for high standards. These units facilitate internal temperature control in the bath tank or control of externally connected applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over between internal and external circulation USB & RS232 connection High-quality bath tanks made of stainless steel with bath lid and drain tap Integrated cooling coil for counter-cooling Technical Data Order No. 9013512 Model series CORIO Category Heating Circulators Working temperature range (°C) +20 ... +200 Temperature stability (°C) ±0.02 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 8.7 x 5.9 / 7.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 8.5 ... 12 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 29.9 x 52 Weight (LBS) 13 x 19.3 x 18.5 Description Built-in cooling coil for tap water connection for temperature applications below or near ambient temperatures are integrated. Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Cooling coil integrated Bath tank Stainless steel Bath cover integrated Manual
$6,781.18
Julabo CORIO CP-BC26
Julabo CORIO CP-BC26 Call for lead time CORIO heating circulators feature professional technology for high standards. These units facilitate internal temperature control in the bath tank or control of externally connected applications. Included with each unit: 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) Key Benefits: Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over between internal and external circulation USB & RS232 connection High-quality bath tanks made of stainless steel with bath lid and drain tap Integrated cooling coil for counter-cooling Technical Data Order No. 9013526 Model series CORIO Category Heating Circulators Working temperature range (°C) +20 ... +200 Temperature stability (°C) ±0.02 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Pump capacity flow rate (l/min) 8 ... 27 Pump capacity flow pressure (psi) 1.5 ... 10.2 Bath opening / bath depth (W x L / D inch) 10.2 x 13.8 /7.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 19 ... 26 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 15.4 x 24.4 x 18.9 Weight (LBS) 41.9 Description Eine Kühlschlange für Arbeiten unterhalb bzw. nahe der Umgebungstemperatur ist integriert. Included with each unit 2 Schlaucholiven passend für Schlauch 8 und 12 mm l.W. (Pumpenanschlüsse mit M16x1 Außengewinde) Cooling coil integrated Bath tank Stainless steel Bath cover integrated Manual
$7,527.36
Julabo FL300
Julabo FL300 The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Specifications Shipping Weight 158.4 lbs Shipping Dimensions 24 x 32 x 40 in Order No. 9660003 Model Series FL Series Working Temperature Range (°C) -20° to +40° Temperature Stability (°C) ±0.05 Temperature Control PID temperature control Display Resolution 0.01 °C Temperature Display LED Cooling Capacity 0.1 kW @ -20 °C, 0.15 kW @ -10°C, 0.2 kW @ 0 °C, 0.3 kW @ 20 °C Pump capacity Flow Rate (l/min) 15 Pump Capacity Flow Pressure (psi) 5.08 Pump Connections M16x1 Filling Volume Liters 3...4.5 Barbed fittings diameter (inner dia. / mm) 8/12 Refrigerant R134a Digital Interface RS232, Optional Profibus Ambient Temperature 5…40 °C Noise Level (dBA) 55 Classification Classification III (FL)according to DIN 12876-1 Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G3/4"male) Cooling of Compressor Air Power requirement V / Hz / A 115/60/6 Cooling capacity °C 20kW (@ 20°C), 15kW (@ 10°C), 10kW (@ 0°C), 6kW (@ -10°C), 2.5kW (@ -20°C) Alarm Signal acoustically & optical Temperature Selection / Display °C Volumetric Capacity Liters 3...4.5 Outer dimensions W x L x H inch 9.8 x 19.7 x 23.6 Available Voltage Versions 100 V / 50-60 Hz, 115 V / 60 Hz,230 V / 50 Hz, 230 V / 60 Hz Other Characteristics Removable venting grid for convenient cleaning to maintain cooling performance. Characteristics / Display Easy to read: Large LED temperature display for actual value and setpoint(resolution 0.1 °C) Characteristics / Operation Simple and fast : Convenient 3-key setpoint adjustment (FLmodels) Characteristics / Temperature Control Precise: PID Temperature control with set control parameters, temperature stability ±0.02…±0.2 °C Characteristics / Refrigeration Technology Consistent cooling capacity: Easily removable venting gridfor quick and easy cleaning Characteristics / Technical Features Serial connection: RS232 interface for PC connection, e.g. data communication and recording of measured values
$7,718.43
Julabo FL300
Julabo FL300 The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Specifications Order No. 9660003 Model Series FL Series Category Recirculating Coolers Working Temperature Range (°C) -20 ... +40 Temperature Stability (°C) ±0.05 Display Resolution 0.01 °C Temperature Display LED Cooling capacity (Medium Ethanol) °C 20 0 -10 -20kW 0.3 0.2 0.15 0.1 Pump capacity Flow Rate (l/min) 15 Pump Capacity Flow Pressure (psi) 5.08 Pump Connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling Volume Liters 3 ... 4.5 Refrigerant stage 1 R134a Filling volume refrigerant stage 1 (g) 133 Global Warming Potential for 1430 Carbon dioxide equivalent stage 1 (t) 0.19 Digital Interface RS232, Optional Profibus Ambient Temperature 5...40 °C Dimensions W x L x H (inch) 9.8 x 19.7 x 23.6 Weight (LBS) 86 Noise Level (dBA) 55 Description Suitable fluids: water, water-glycol mixture, JULABO Thermal bath fluids Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G3/4" male) Cooling of Compressor Air Available Voltage Versions -115V/60HZ -230V/50HZ-230V/60HZ Product Data Sheet Manual
$9,625.16
Julabo FP51-SL
Julabo FP51-SL JULABO Ultra-Low Refrigerated Circulators for heating and cooling are suitable for external temperature tasks. Powerful circulating pump systems and high heating and cooling capacities guarantee short heat-up and cool-down times. ACC ‘Active Cooling Control‘ provides active cooling control across the whole temperature range. An energy saving feature with only minor loss of heat is provided by the proportional cooling capacity control in the ‘FP’ refrigeration units. The inevitable dust accumulation that occurs in refrigeration systems is solved by means of an easily removed venting grill, which allows for easy cleaning. The units are equipped with handles or castors for an easy transportation. All models have a drain tap on the front allowing the fluid to be drained easily. Additionally the instruments are equipped with an improved insulation to help avoid ice-formation, and have a visual liquid level display. Specifications Order No. 9352751 Model Series HighTech Working Temperature Range (°C) -51°... +200° Temperature Stability (°C) ±0.05 Temperature Control ICC intelligent cascade control, TCF temperature control features, Absolute temperature calibration 3-point Display Resolution 0.01 °C Integrated Programmer 6x60 steps Temperature Display VFD, LCD Heating Capacity (kW) 3 Cooling Capacity 0.26 kW @ -40 °C, 1 kW @ 20 °C,1.5 kW @ 0 °C, 2 kW @ 20 °C Pump capacity Flow Rate (l/min) 22-26 Pump Capacity Flow Pressure (psi) 5.8-10.2 Pump Capacity Flow Suction (psi) 2.9-5.8 Pump Connections M16x1 Filling Volume Liters 11 Bath opening / bath depth (W x L / D inch) 7.1 x 4.7 / 7.9 Barbed fittings diameter (inner dia. / mm) 8/12 Refrigerant R507 External Pt100 Intergrated Digital Interface RS232, RS485, Optional Profibus Ambient Temperature 5…40 °C Noise Level (dBA) 53 Classification Classification III (FL)according to DIN 12876-1 Included with 2 barbed fittings for tubing 8 and 12mm inner dia (pump connections M16x1) Analog Connection Input/Output Optional Cooling Coil optional Accessory (8970243) Cooling of Compressor Air Power requirement V / Hz / A 3x 230/60/14 Heaters 3kW Cooling capacity °C 2kW (@ 20°C), 1.5kW (@ 0°C), 1kW (@ -20°C), 260W (@ -40°C) Alarm Signal acoustically & optical Temperature Selection / Display °C / °F Volumetric Capacity Liters 11 Outer dimensions W x L x H inch 18.1 x 23.6 x 35.4 Available Voltage Versions 208 V / 3 Ph. / 60 Hz, 230 V / 3 Ph. / 50 Hz, 400 V / 3 Ph. / 50 Hz Other Characteristics Optional: Electronic module with analog connections for external programming, temperature recorder, standby, alarm (Order no. 8 900 100). Characteristics / Display Additional plain textinformation: LCD dialog display for interactive operation with plain textdisplay, Easy to read VFD Comfort display for simultaneous display of 3 values, warning functions, high temperature cut-off, pump stages (resolution 0.01 °C), Pump stage and liquid level: Backlit indicator for selected pump stages and filling volume Characteristics / Operation Comfortable and detailed: Comfortable keypad with additional menu functions for pump stages, calibration, control parameters, programmer, warnings, etc. Characteristics / Temperature Control For perfect results: Intelligent Cascade Control, automatic & self optimizing adjustment of PID control parameters, temperature stability ±0.005 °C internal, Characteristics / Refrigeration Technology 100 % Cooling capacity: Active Cooling Control for cooling available throughout the entire working temperature range, fast cool-down even at higher temperatures, Condensation and ice protection: A heated cover plate prevents condensation or ice build-up in the bath, Consistent cooling capacity: Easily removable venting grid for quick and easy cleaning, Energy saving cooling: Proportional cooling control for automatic adjustment of cooling power or temporary switch-off of compressor as needed to save up to 90 % energy in comparison to unregulated co. Characteristics / Technical Features Clever pump system: Reliable and consistent pump capacity, electronically adjustable pump stages, Control from the external application: External Pt100 sensor connection for precisemeasurement and control directly in the external application, Connection compliant to standard: RS232/RS485 dual-interface for serial data transmission according to EIA-485 industry standard (2-wire bus technology), upgradable with Profibus DP, Optimal program control: For the execution of time and temperature dependant profiles, 6 temperature profiles with 60 steps max., with real time clock, Automatic control of operating time: Electronic countdown-timer function for timer-programmed unit shut-down, standby mode after programmed time expires. Characteristics / Warning & Safety Functions Early warning system for high/low temperature limits: Maximum safety for applications, optical and audible alarm, convertible to automated cut-off function, Early warning system for low liquid level: Maximum safety for applications, optical and audible alarm, allows user to refill bath fluid before the unit shuts down, Enhanced protective functions : Maximum safety, adjustable high temperature cut-off or dry-running protection, additional display of setpoints permits easy and precise adjustments, For flammable bath fluids: Classification III (FL) according to DIN 12876-1
$27,332.94
Julabo FL7006
Julabo FL7006 The FL series of chillers for routine cooling applications for the laboratory and industry. The PID control provides a temperature stability of ±0.5°C. All units can be cleaned easily and have a water-proof keypad with LED temperature indication. All instruments include an RS232 interface and alarm shutdown on the front of the units. The filling port is easily accessible from the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows for easy cleaning of the condenser with the drain tap accessible behind the grid. All models include a visible level indication. Air-cooled units have venting slots are on the front and rear enabling installation next to a wall or another apparatus (space saving). Key Benefits: Ergonomic design and easy operation Splash-proof keypad Large, bright LED display Reliable Microprocessor PID temperature control Filling level indicator Powerful immersion pumps, suitable for continuous operation Permissible temperature in return line +80°C Easy filling from the top with hinged protective lid Low liquid level protection with optical and audible alarm signal Integrated stainless steel bath tanks Removable venting grid for cleaning of the condenser Front drain No side vents RS232 interface for PC-connection IP class according to IEC 60529: 21 Alarm output, potential-free change-over contact (max. 30 VA) Pressure Indicator By-pass valve to adjust pump pressure Specifications Order No. 9666070 Model Series FL Series Working Temperature Range (°C) -20° to +40° Temperature Stability (°C) ±0.05 Temperature Control PID temperature control Display Resolution 0.01 °C Temperature Display LED Cooling Capacity °C 20 0 -10 -20 kW 7 5.1 3 1.55 Pump capacity Flow Rate (l/min) 60 Pump Capacity Flow Pressure (psi) 7.25...87.0 Pump Connections G1 1/4-inch Filling Volume Liters 39...47 Barbed fittings diameter (inner dia. / mm) 1-inch Refrigerant R404A Digital Interface RS232, Optional Profibus Ambient Temperature 5…40 °C Noise Level (dBA) 74 Classification Classification III (FL)according to DIN 12876-1 Included with 2 barbed fittings for tubing 3/4" inner dia. (pump connections G1 1/4"male) Cooling of Compressor Air Power requirement V / Hz / A 3x 230/60/23 Cooling capacity °C 7kW (@ 20°C), 6.4kW (@ 10°C), 5.1kW (@ 0°C), 3kW (@ -10°C), 1.55kW (@ -20°C) Alarm Signal acoustically & optical Temperature Selection / Display °C Volumetric Capacity Liters 39...47 Outer dimensions W x L x H inch 30.7 x 33.5 x 58.3 Available Voltage Versions 230 V / 3 Ph. / 60 Hz, 400 V / 3Ph. / 50 Hz Other Characteristics Removable venting grid for convenient cleaning to maintain cooling performance. Internal pump by-pass valve to regulate pressure Characteristics / Display Easy to read: Large LED temperature display for actual value and setpoint(resolution 0.1 °C) Characteristics / Operation Simple and fast : Convenient 3-key setpoint adjustment (FLmodels) Characteristics / Temperature Control Precise: PID Temperature control with set control parameters, temperature stability ±0.02…±0.2 °C Characteristics / Refrigeration Technology Consistent cooling capacity: Easily removable venting gridfor quick and easy cleaning Characteristics / Technical Features Serial connection: RS232 interface for PC connection, e.g. data communication and recording of measured values
$35,708.72 - $39,908.94
Julabo FP51-SL
Julabo FP51-SL JULABO Ultra-Low Refrigerated Circulators for heating and cooling are suitable for external temperature tasks. Powerful circulating pump systems and high heating and cooling capacities guarantee short heat-up and cool-down times. ACC ‘Active Cooling Control‘ provides active cooling control across the whole temperature range. An energy saving feature with only minor loss of heat is provided by the proportional cooling capacity control in the ‘FP’ refrigeration units. The inevitable dust accumulation that occurs in refrigeration systems is solved by means of an easily removed venting grill, which allows for easy cleaning. The units are equipped with handles or castors for an easy transportation. All models have a drain tap on the front allowing the fluid to be drained easily. Additionally the instruments are equipped with an improved insulation to help avoid ice-formation, and have a visual liquid level display. Specifications Order No. 9352751 Model Series HighTech Working Temperature Range (°C) -51°... +200° Temperature Stability (°C) ±0.05 Temperature Control ICC intelligent cascade control, TCF temperature control features, Absolute temperature calibration 3-point Display Resolution 0.01 °C Integrated Programmer 6x60 steps Temperature Display VFD, LCD Heating Capacity (kW) 3 Cooling Capacity 0.26 kW @ -40 °C, 1 kW @ 20 °C,1.5 kW @ 0 °C, 2 kW @ 20 °C Pump capacity Flow Rate (l/min) 22-26 Pump Capacity Flow Pressure (psi) 5.8-10.2 Pump Capacity Flow Suction (psi) 2.9-5.8 Pump Connections M16x1 Filling Volume Liters 11 Bath opening / bath depth (W x L / D inch) 7.1 x 4.7 / 7.9 Barbed fittings diameter (inner dia. / mm) 8/12 Refrigerant R507 External Pt100 Intergrated Digital Interface RS232, RS485, Optional Profibus Ambient Temperature 5…40 °C Noise Level (dBA) 53 Classification Classification III (FL)according to DIN 12876-1 Included with 2 barbed fittings for tubing 8 and 12mm inner dia (pump connections M16x1) Analog Connection Input/Output Optional Cooling Coil optional Accessory (8970243) Cooling of Compressor Air Power requirement V / Hz / A 3x 230/60/14 Heaters 3kW Cooling capacity °C 2kW (@ 20°C), 1.5kW (@ 0°C), 1kW (@ -20°C), 260W (@ -40°C) Alarm Signal acoustically & optical Temperature Selection / Display °C / °F Volumetric Capacity Liters 11 Outer dimensions W x L x H inch 18.1 x 23.6 x 35.4 Available Voltage Versions 230V/3Ph/50Hz 400V/3Ph/50Hz 230V/3Ph/60Hz 230V/3Ph/60Hz (Canadian and US NRTL Certified) Other Characteristics Optional: Electronic module with analog connections for external programming, temperature recorder, standby, alarm (Order no. 8 900 100). Characteristics / Display Additional plain textinformation: LCD dialog display for interactive operation with plain textdisplay, Easy to read VFD Comfort display for simultaneous display of 3 values, warning functions, high temperature cut-off, pump stages (resolution 0.01 °C), Pump stage and liquid level: Backlit indicator for selected pump stages and filling volume Characteristics / Operation Comfortable and detailed: Comfortable keypad with additional menu functions for pump stages, calibration, control parameters, programmer, warnings, etc. Characteristics / Temperature Control For perfect results: Intelligent Cascade Control, automatic & self optimizing adjustment of PID control parameters, temperature stability ±0.005 °C internal, Characteristics / Refrigeration Technology 100 % Cooling capacity: Active Cooling Control for cooling available throughout the entire working temperature range, fast cool-down even at higher temperatures, Condensation and ice protection: A heated cover plate prevents condensation or ice build-up in the bath, Consistent cooling capacity: Easily removable venting grid for quick and easy cleaning, Energy saving cooling: Proportional cooling control for automatic adjustment of cooling power or temporary switch-off of compressor as needed to save up to 90 % energy in comparison to unregulated co. Characteristics / Technical Features Clever pump system: Reliable and consistent pump capacity, electronically adjustable pump stages, Control from the external application: External Pt100 sensor connection for precisemeasurement and control directly in the external application, Connection compliant to standard: RS232/RS485 dual-interface for serial data transmission according to EIA-485 industry standard (2-wire bus technology), upgradable with Profibus DP, Optimal program control: For the execution of time and temperature dependant profiles, 6 temperature profiles with 60 steps max., with real time clock, Automatic control of operating time: Electronic countdown-timer function for timer-programmed unit shut-down, standby mode after programmed time expires. Characteristics / Warning & Safety Functions Early warning system for high/low temperature limits: Maximum safety for applications, optical and audible alarm, convertible to automated cut-off function, Early warning system for low liquid level: Maximum safety for applications, optical and audible alarm, allows user to refill bath fluid before the unit shuts down, Enhanced protective functions : Maximum safety, adjustable high temperature cut-off or dry-running protection, additional display of setpoints permits easy and precise adjustments, For flammable bath fluids: Classification III (FL) according to DIN 12876-1
$27,332.94 - $29,187.83
Julabo SE-6
Julabo SE-6 JULABO Heating Circulators with stainless steel bath tanks are mainly used for internal and external temperature tasks. The new range of these models now have increased capacities, allowing for temperature application of larger external systems, as well as open systems. Simultaneous temperature applications of smaller objects can also be carried out directly in the internal bath of the circulator. Models from the TopTech and HighTech Series are available with different bath sizes and features. Accessories for these units include test tube racks, bath covers etc. An integrated cooling coil is provided for temperature applications at near ambient or just below. Included with each unit: 2 each barbed fittings for tubing 8 and 12 mm inner dia. (pump connections M16x1 female). Key Benefits: VFD COMFORT DISPLAY Keypad for setpoints, warning/safety values and menu functions ICC (Intelligent Cascade Control), self-optimizing temperature control ATC3 3-Point-Calibration Pt100 External sensor connection for measurement and control SMART PUMP, electronically adjustable pump stages Early warning system for low liquid level (DBGM 203 06 059.8) Adjustable high temperature cut-out, visible via display RS232 interface for online communication Integrated programmer for 10 program steps Specification Order No. 9252506 Model series HighTech Category Heating Circulators Working temperature range (°C) +20 ... +300 Temperature stability (°C) ±0.01 Setting / display resolution 0.01 °C Integrated programmer 1x10 steps Temperature Display VFD Heating capacity (kW) 3 Pump capacity flow rate (l/min) 22-26 Pump capacity flow pressure (psi) 5.8-10.2 Pump capacity flow suction (psi) 2.9-5.8 Bath opening / bath depth (W x L / D inch) 5.1 x 5.9 / 7.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 6 External Pt100 sensor connection integrated Digital interfaces RS232Optional Profibus Ambient temperature 5...40 °C Dimensions W x L x H (inch) 8.3 x 16.9 x 17.3 Weight (LBS) 29.7 Classification according to DIN12876-1 Classification III (FL) Description Built-in cooling coil for tap water connection for temperature applications below or near ambient temperatures are integrated. Included with each unit 2 each barbed fittings for tubing 8 and 12 mm inner dia. (pump connections M16x1 male). Cooling coil integrated Bath tank Stainless steel Power requirement V / Hz / A 230/50-60/13 Additional voltage versions available Product Data Sheet Manual
$5,119.59 - $6,163.07
Julabo SL-12 Heating Circulator
Julabo SL-12 Heating Circulator JULABO constant temperature circulators with a stainless steel bath tank for internal and external temperature control tasks. They are designed primarily for external temperature control. They have elevated performance for controlling the temperature of large or open systems. Smaller objects may be inserted directly into the circulator's bath at the same time. Models of the TopTech and HighTech series are available with a variety of bath sizes and functional characteristics. Bath covers and a variety of bath inserts for laboratory glassware are available as accessories Specifications Order No. 9352512 Model series HighTech Category Heating Circulators Working temperature range (°C) +20 ... +300 Temperature stability (°C) ±0.01 Setting / display resolution 0.01 °C Integrated programmer 6x60 steps Temperature Display VFD , LCD Heating capacity (kW) 3 Pump capacity flow rate (l/min) 22-26 Pump capacity flow pressure (psi) 5.8-10.2 Pump capacity flow suction (psi) 2.9-5.8 Bath opening / bath depth (W x L / D inch) 8.7 x 5.9 x 7.9 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (liters) 12 External Pt100 sensor connection integrated Digital interfaces RS232RS485Optional Profibus Ambient temperature 5...40 °C Dimensions W x L x H (inch) 11.8 x 16.9 x 18.5 Weight (LBS) 30.8 Classification according to DIN12876-1 Classification III (FL) Description Built-in cooling coil for tap water connection for temperature applications below or near ambient temperatures are integrated. Included with each unit 2 each barbed fittings for tubing 8 and 12 mm inner dia. (pump connections M16x1 male). Cooling coil integrated Bath tank Stainless steel Power requirement V / Hz / A 230/50-60/13 Additional voltage versions available
$6,832.19 - $13,333.55
Polyscience 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled
Polyscience 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled Description: 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled Display: LED Connectivity: Optional: RS232, RS485 Working Temperature Range °C: 5° to 35° Temperature Stability °C: ±0.5° Temperature Calibration Capability: 1-point Pump Type: Positive Displacement Key Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available Common Specifications Working Temperature Range °F 41° to 95° Working Temperature Range °C 5° to 35° Reservoir Capacity (gallons) 3.5 Reservoir Capacity (liters) 13.25 Reservoir/Tank Material Polyethylene Reservoir Cover Screw-on Cap Cleanable Air Filter Yes Cleanable Fluid Filter Yes Temperature Stability °F ±0.9° Temperature Stability °C ±0.5° Display LED Display Resolution (Read) 0.1 Pump Type Positive Displacement Process Connections 1/2" (F) NPT Over-Temperature Protection / Failsafe Heater Control Yes Reservoir Liquid Level Indicator Yes Reservoir Drain Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 30.5 x 19 x 26 in Overall Dimensions (L x W x H) (cm) 78 x 48 x 66 cm Compressor Size (HP) 1.5 Refrigerant R134a Shipping Weight (pounds) 340.0 Shipping Weight (kilograms) 154.0 Catalog Page Number 104 Hz (Hertz) 60 Hz Only 50 Hz Only Part Number 6860P46A270D 6850P46A270E Maximum Pressure (psi) 100.0 83.0 Maximum Pressure (bar) 6.90 5.72 Maximum Pressure Flow Rate (gpm) 3.50 2.90 Maximum Pressure Flow Rate (l/min) 13.2 11.0 Cooling Capacity @ +10°C (W) 4420 3715 Cooling Capacity @ +20°C (W) 5200 4371 Cooling Capacity @ +30°C (W) 5980 5027 Heater Wattage 1000 1000 Electrical Requirements (VAC/Hz/Ph/A) 230/60/1/21.1 240/50/1/20.8 Regulatory Approvals TUV CSA, CUL, CE
$14,927.92
Polyscience 10 Liter General Purpose Water Bath
Polyscience 10 Liter General Purpose Water Bath Key Features: Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads Specifications Working Temperature Range °F Ambient +10° to 212° Reservoir Capacity (liters) 10 Reservoir/Tank Material Stainless Steel Reservoir Cover Hinged Gable Working Access (L x W x D) (inches) 10.6 x 11.6 x 6 Temperature Stability °F ±0.2° Display 3.25" Flammability Class (DIN 12876-1) I (NFL) Over-Temperature Protection / Failsafe Heater Control Yes Maximum Ambient Temperature °F 104° Overall Dimensions (L x W x H) (inches) 17 x 15.5 x 15.5 Shipping Weight (pounds) 22.0 60Hz Only Part Number WBE10A11B Included Hardware Sample Tray Heater Wattage 1000 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/8.6 Regulatory Approvals ETL Certifications: Regulatory Approvals: ETL Regulatory Approvals: CE
$1,419.49
Polyscience 15 Liter Advanced Digital Heated Circulator
Polyscience 15 Liter Advanced Digital Heated Circulator Note: This Item has a lead time of 2 weeks depending on stock availability. Specification Description 200, 15 L Htg. Circulator Controller Type Advanced Digital Display 3.75" Touch-Pad LCD Connectivity Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe Languages Supported 4: French, German, Spanish, English Swivel 180 Rotating Controller Yes Working Temperature Range °C Ambient +10° to 200° Temperature Stability °C ±0.01° Fluid Optimization/Specific Heat Tuning Automatic and/or user-adjustable Temperature Calibration Capability 1-point Working Access (L x W x D) (cm) 21.2 x 27.6 x 14 cm Pump Type Pressure/Suction External Temperature Control Capability Yes Flammability Class (DIN 12876-1) III (FL) Working Temperature Range °F Ambient + 20° to 392° Working Temperature Range °C Ambient +10° to 200° Reservoir Capacity (gallons) 3.96 Reservoir Capacity (liters) 15 Reservoir/Tank Material Stainless Steel Reservoir Cover Included DuraTop Yes LidDock Yes Working Access (L x W x D) (inches) 8.35 x 10.88 x 5.5 in Working Access (L x W x D) (cm) 21.2 x 27.6 x 14 cm Temperature Stability °F ±0.02° Temperature Stability °C ±0.01° Display 0.01 Display Resolution (Read) 0.01 Pump Type Pressure/Suction Pump Speed Variable Process Connections 1/4" (F) NPT External Temperature Control Capability Yes Flammability Class (DIN 12876-1) III (FL) Over-Temperature Protection / Failsafe Heater Control Yes Low Liquid Level Protection Yes Reservoir Drain Yes Cooling Coil Yes Included Software PolyTemp Viewer, USB driver Maximum Ambient Temperature °F 95 Maximum Ambient Temperature °C 35 Overall Dimensions (L x W x H) (inches) 22.4 x 14.5 x 16.6 in Overall Dimensions (L x W x H) (cm) 56.9 x 36.8 x 42.2 cm Environmental Compliance RoHS, WEEE Shipping Weight (pounds) 62.0 Shipping Weight (kilograms) 28.1 Catalog Page Number 56-57 60 Hz Only Part Number AD15H200-A11B Maximum Pressure (psi) 4.3 Maximum Pressure (bar) 0.30 Maximum Pressure Flow Rate (gpm) 5.30 Maximum Pressure Flow Rate (l/min) 20.1 Maximum Suction Flow Rate (gpm) 3.9 Maximum Suction Flow Rate (l/min) 14.7 Included Hardware Nylon hose adapters for 3/8", 1/4", and 3/16" Heater Wattage 1100 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/10 Regulatory Approvals ETL 50 Hz Only Part Number AD15H200-A12E Maximum Pressure (psi) 3.6 Maximum Pressure (bar) 0.25 Maximum Pressure Flow Rate (gpm) 4.40 Maximum Pressure Flow Rate (l/min) 16.7 Maximum Suction Flow Rate (gpm) 3.2 Maximum Suction Flow Rate (l/min) 12.2 Included Hardware Nylon hose adapters for 3/8", 1/4", and 3/16", and 1/4" NPT to M16 adapter Heater Wattage 2200 Electrical Requirements (VAC/Hz/Ph/A) 240/50/1/10 Regulatory Approvals CE Key Features: Intuitive 3.75" (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180 Rotating Controller On-board connectivity: Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Regulatory Approvals ETL Approvals CE Approvals Polyscience Data Sheet User Manual
$5,246.56 - $5,282.99
Polyscience 15 Liter Advanced Digital Refrigerated Circulator (-30°C/200°C)
Polyscience 15 Liter Advanced Digital Refrigerated Circulator (-30°C/200°C) ***Note: This item has a lead time of 2-3 weeks depending on stock availability.*** Description: -30, 15 L Ref. Circulator Controller Type: Advanced Digital Display: 3.75" Touch-Pad LCD Connectivity: Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe Languages Supported: 4: French, German, Spanish, English Swivel 180 Rotating Controller: Yes Working Temperature Range °C: -30° to 200° Temperature Stability °C: ±0.01° Fluid Optimization/Specific Heat Tuning: Automatic and/or user-adjustable Temperature Calibration Capability: 1-point Working Access (L x W x D) (cm): 21.2 x 27.6 x 14 cm Pump Type: Pressure/Suction External Temperature Control Capability: Yes Flammability Class (DIN 12876-1): III (FL) Specifications Working Temperature Range °F -22° to 392° Working Temperature Range °C -30° to 200° Nominal Cooling Capacity @ +20C (W) 915 Reservoir Capacity (gallons) 3.96 Reservoir Capacity (liters) 15 Reservoir/Tank Material Stainless Steel Reservoir Cover Included DuraTop Yes LidDock Yes Cleanable Air Filter Yes Working Access (L x W x D) (inches) 8.35 x 10.88 x 5.5 in Working Access (L x W x D) (cm) 21.2 x 27.6 x 14 cm Temperature Stability °F ±0.02° Temperature Stability °C ±0.01° Display 3.75" Touch-Pad LCD Display Resolution (Set) 0.01 Display Resolution (Read) 0.01 Pump Type Pressure/Suction Pump Speed Variable Process Connections 1/4" (F) NPT External Temperature Control Capability Yes Flammability Class (DIN 12876-1) III (FL) Over-Temperature Protection / Failsafe Heater Control Yes Low Liquid Level Protection Yes WhisperCool Environmental Control Technology Yes Cool Command Refrigeration Technology Yes Reservoir Drain Yes Included Software PolyTemp Viewer, USB driver Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 22.4 x 14.5 x 26.9 in Overall Dimensions (L x W x H) (cm) 56.9 x 36.8 x 68.3 cm Refrigerant R404A Environmental Compliance RoHS, WEEE Shipping Weight (pounds) 118.0 Shipping Weight (kilograms) 53.5 60Hz Part Number AD15R-30-A11B Maximum Pressure (psi) 4.3 Maximum Pressure (bar) 0.30 Maximum Pressure Flow Rate (gpm) 5.30 Maximum Pressure Flow Rate (l/min) 20.1 Maximum Suction Flow Rate (gpm) 3.9 Maximum Suction Flow Rate (l/min) 14.7 Cooling Capacity @ -20°C (W) 165 Cooling Capacity @ 0°C (W) 505 Cooling Capacity @ +20°C (W) 915 Included Hardware Nylon hose adapters for 3/8", 1/4", and 3/16" Heater Wattage 1100 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/13 Regulatory Approvals ETL Certifications: Regulatory Approvals: ETL Circulating Bath Operator's Manual
$9,254.35
Polyscience 15 Liter Advanced Digital Refrigerated Circulator (-40°C/200°C)
Polyscience 15 Liter Advanced Digital Refrigerated Circulator (-40°C/200°C) Specification Description -40, 15 L Ref. Circulator Controller Type Advanced Digital Display 3.75" Touch-Pad LCD Connectivity Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe Languages Supported 4: French, German, Spanish, English Swivel 180 Rotating Controller Yes Working Temperature Range °C -40° to 200° Temperature Stability °C ±0.01° Fluid Optimization/Specific Heat Tuning Automatic and/or user-adjustable Temperature Calibration Capability 1-point Working Access (L x W x D) (cm) 21.2 x 27.6 x 14 cm Pump Type Pressure/Suction External Temperature Control Capability Yes Flammability Class (DIN 12876-1) III (FL) Working Temperature Range °F -40° to 392° Working Temperature Range °C -40° to 200° Nominal Cooling Capacity @ +20C (W) 1000 Reservoir Capacity (gallons) 3.96 Reservoir Capacity (liters) 15 Reservoir/Tank Material Stainless Steel Reservoir Cover Included DuraTop Yes LidDock Yes Cleanable Air Filter Yes Working Access (L x W x D) (inches) 8.35 x 10.88 x 5.5 in Working Access (L x W x D) (cm) 21.2 x 27.6 x 14 cm Temperature Stability °F ±0.02° Temperature Stability °C ±0.01° Display 3.75" Touch-Pad LCD Display Resolution (Set) 0.01 Display Resolution (Read) 0.01 Pump Type Pressure/Suction Pump Speed Variable Process Connections 1/4" (F) NPT Flammability Class (DIN 12876-1) III (FL) Over-Temperature Protection / Failsafe Heater Control Yes Low Liquid Level Protection Yes WhisperCool Environmental Control Technology Yes Cool Command Refrigeration Technology Yes Reservoir Drain Yes Included Software PolyTemp Viewer, USB driver Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 22.4 x 14.5 x 26.9 in Overall Dimensions (L x W x H) (cm) 56.9 x 36.8 x 68.3 cm Refrigerant R452A Environmental Compliance RoHS, WEEE Shipping Weight (pounds) 118.0 Shipping Weight (kilograms) 53.5 Catalog Page Number 40-41 60 Hz Only Part Number AD15R-40-A11B Maximum Pressure (psi) 4.3 Maximum Pressure (bar) 0.30 Maximum Pressure Flow Rate (gpm) 5.30 Maximum Pressure Flow Rate (l/min) 20.1 Maximum Suction Flow Rate (gpm) 3.9 Maximum Suction Flow Rate (l/min) 14.7 Cooling Capacity @ -20°C (W) 265 Cooling Capacity @ 0°C (W) 650 Cooling Capacity @ +20°C (W) 1000 Cooling Capacity @ +100°C (W) 1000 Included Hardware Nylon hose adapters for 3/8", 1/4", and 3/16" Heater Wattage 1100 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/13 Regulatory Approvals ETL Key Features: Intuitive 3.75" (9.5cm) display with touch-pad control 4 Languages: French, German, Spanish, English Swivel 180 Rotating Controller On-board connectivity: Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Operators Manual
$8,525.66
Polyscience 2 Liter General Purpose Water Bath
Polyscience 2 Liter General Purpose Water Bath Description: General Purpose Water Bath, Digital, 2 L Display: 3.25" LCD Work Temperature Range °C: Ambient +5° to 100° Temperature Stability °C: ±0.1° Temperature Calibration Capability: 1-point Working Access (L x W x D) (cm): 9.9 x 10.9 x 15.2 Flammability Class (DIN 12876-1): I (NFL) Key Features: Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads Specifications Working Temperature Range °F Ambient +10° to 212° Working Temperature Range °C Ambient +5° to 100° Reservoir Capacity (liters) 2 Reservoir/Tank Material Stainless Steel Reservoir Cover Hinged Gable Working Access (L x W x D) (inches) 3.9 x 4.3 x 6 Temperature Stability °F ±0.2° Display 3.25" Flammability Class (DIN 12876-1) I (NFL) Over-Temperature Protection / Failsafe Heater Control Yes Maximum Ambient Temperature °F 104° Overall Dimensions (L x W x H) (inches) 12 x 9 x 13.5 Shipping Weight (pounds) 9.0 60Hz Only Part Number WBE02A11B Included Hardware Sample Tray Heater Wattage 120 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/1.1 Regulatory Approvals ETL Certifications: Regulatory Approvals: ETL Approval CE Approval Polyscience Water Bath Operator's Manual
$986.64
Polyscience 20 Liter General Purpose Water Bath
Polyscience 20 Liter General Purpose Water Bath Key Features: Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads Specifications Working Temperature Range °F Ambient +10° to 212° Reservoir Capacity (liters) 20 Reservoir/Tank Material Stainless Steel Reservoir Cover Hinged Gable Working Access (L x W x D) (inches) 9.5 x 17 x 6 Temperature Stability °F ±0.2° Display 3.25" Flammability Class (DIN 12876-1) I (NFL) Over-Temperature Protection / Failsafe Heater Control Yes Maximum Ambient Temperature °F 104° Overall Dimensions (L x W x H) (inches) 17.5 x 22.5 x 15.5 Shipping Weight (pounds) 25.0 60Hz Only Part Number WBE20A11B Included Hardware Sample Tray Heater Wattage 1400 Electrical Requirements (VAC/Hz/Ph/A) 240/50/1/6 Regulatory Approvals ETL Certifications: Regulatory Approvals: ETL Approval CE Approval Operator's Manual
$1,710.96
Polyscience 28 Liter Advanced Digital Refrigerated Circulator (-30°C/200°C)
Polyscience 28 Liter Advanced Digital Refrigerated Circulator (-30°C/200°C) Specification Description -30, 28 L Ref. Circulator Controller Type Advanced Digital Display 3.75" Touch-Pad LCD Connectivity Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe Languages Supported 4: French, German, Spanish, English Swivel 180 Rotating Controller Yes Working Temperature Range °C -30° to 200° Temperature Stability °C ±0.01° Fluid Optimization/Specific Heat Tuning Automatic and/or user-adjustable Temperature Calibration Capability 1-point Working Access (L x W x D) (cm) 31.4 x 35.9 x 14 cm Pump Type Pressure/Suction External Temperature Control Capability Yes Flammability Class (DIN 12876-1) III (FL) Working Temperature Range °F -22° to 392° Working Temperature Range °C -30° to 200° Nominal Cooling Capacity @ +20C (W) 915 Reservoir Capacity (gallons) 7.4 Reservoir Capacity (liters) 28 Reservoir/Tank Material Stainless Steel Reservoir Cover Included DuraTop Yes LidDock Yes Cleanable Air Filter Yes Working Access (L x W x D) (inches) 12.35 x 14.13 x 5.5 in Working Access (L x W x D) (cm) 31.4 x 35.9 x 14 cm Temperature Stability °F ±0.02° Temperature Stability °C ±0.01° Display 3.75" Touch-Pad LCD Display Resolution (Set) 0.01 Display Resolution (Read) 0.01 Pump Type Pressure/Suction Pump Speed Variable Process Connections 1/4" (F) NPT External Temperature Control Capability Yes Flammability Class (DIN 12876-1) III (FL) Over-Temperature Protection / Failsafe Heater Control Yes Low Liquid Level Protection Yes Reservoir Drain Yes Cooling Coil Yes Included Software PolyTemp Viewer, USB driver Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 26.5 x 18 x 26.9 in Overall Dimensions (L x W x H) (cm) 67.2 x 45.7 x 68.3 cm Refrigerant R404A Environmental Compliance RoHS, WEEE Shipping Weight (pounds) 146.0 Shipping Weight (kilograms) 66.1 Catalog Page Number 40-41 60 Hz Only Part Number AD28R-30-A11B Maximum Pressure (psi) 4.3 Maximum Pressure (bar) 0.30 Maximum Pressure Flow Rate (gpm) 5.30 Maximum Pressure Flow Rate (l/min) 20.1 Maximum Suction Flow Rate (gpm) 3.9 Maximum Suction Flow Rate (l/min) 14.7 Cooling Capacity @ -20°C (W) 165 Cooling Capacity @ 0°C (W) 505 Cooling Capacity @ +20°C (W) 915 Cooling Capacity @ +100°C (W) 915 Included Hardware Nylon hose adapters for 3/8", 1/4", and 3/16" Heater Wattage 1100 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/10 Regulatory Approvals ETL Key Features: Intuitive 3.75" (9.5cm) display with touch-pad control 4 Languages: French, German, Spanish, English Swivel 180 Rotating Controller On-board connectivity: Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Certifications Regulatory Approvals: CE Regulatory Approvals: ETL Operator's Manual
$10,201.64
Polyscience 3 HP High Capacity Chiller; Air-Cooled - Up to 10.5kW @ 20°C
Polyscience 3 HP High Capacity Chiller; Air-Cooled - Up to 10.5kW @ 20°C Key Specifications Description: 3 HP Chiller; Air-Cooled; Up to 10.5kW @ 20°C Display: LED Connectivity: Standard: RS232; Optional: RS485 Working Temperature Range °C: 5° to 35° Temperature Stability °C: ±0.5° Temperature Calibration Capability: 1-point Key Features Chillers 2HP and up are not available outside of the United States High capacity cooling for lasers, EDM equipment, injection molding, and other heat removal applications Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled (3 HP models) Wide variety of pump options available Common Specifications Working Temperature Range °F 41° to 95° Working Temperature Range °C 5° to 35° Cooling Capacity Up to 10.5kW @ 20°C Reservoir Capacity (gallons) 7 Reservoir Capacity (liters) 26.5 Reservoir/Tank Material Contact PolyScience for Options Reservoir Cover Screw-on Cap Cleanable Air Filter Yes Cleanable Fluid Filter Yes Temperature Stability °F ±0.9° Temperature Stability °C ±0.5° Display LED Display Resolution (Read) 0.1 Pump Type Contact PolyScience for Options Process Connections 3/4" (F) NPT Over-Temperature Protection / Failsafe Heater Control Yes Reservoir Liquid Level Indicator Yes Cool Command Refrigeration Technology Yes Reservoir Drain Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 30.5 x 37 x 42 in Overall Dimensions (L x W x H) (cm) 78 x 94 x 107 cm Compressor Size (HP) 3 Refrigerant R134a Shipping Weight (pounds) 570.0 Shipping Weight (kilograms) 259.0 Catalog Page Number 105 Operator's Manual PDF Version
$22,370.75
You have seen 48 out of 75 products