Shop Components
SCILOGEX SCI40-S Overhead LED Digital Stirrer, with s/steel cross stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug
SCILOGEX SCI40-S (40L) LED Digital Overhead Stirrer 50-2200rpm SCILOGEX SCI40-S Overhead LED Digital Stirrer, 40L Capacity, 100-220V 50/60Hz, US Plug (including steel cross-stirrer Part# 1890007, stand sold separately) Product Features A wide range of speed from 50 to 2200rpm Brushless DC motor for long life and maintenance free Analog speed controls displayed on the LED display for monitoring actual speed High torque for viscous medium stirring Over torque protection automatically stops the motor Safety circuits allow for safe stop function in anti-stall or overload condition A through-shaft design allows for easy adjustment of the impeller position In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns Pass through stirrer rods accepted cTUVus approved for UL and CSA 2 YEAR WARRANTY Product Specifications Maximum stirring capacity 40L Maximum torque 60Ncm Viscosity maximum 50000mPas Speed range 50-2200rpm Speed display accuracy ± 50rpm Speed display resolution ± 10rpm Chuck diameter range 0.5-10mm Dimensions 3.3W x 8.7H x 7.3D in (83W x.220H x 186D mm) Motor rating input 120W Motor rating output 100W Weight 5.5lbs Motor type brushless DC motor Voltage/Power 100-220V, 50/60 Hz/ 130W Speed/Torque display LED Overload protection display LED lights Protection class IP42 Permissible ambient temperature and humidity 5-40°C, 80%RH Additional Resources and Information Downloadable PDFs SCI40-S manual SCILOGEX OverheadStirrers brochure SCILOGEX OverheadStirrers Software SCILOGEX SCI20/40-S LED Digital Overhead Stirrer.mp4 from SCILOGEX on Vimeo.
$1,403.40
SCILOGEX D500 Homogenizer, 100-5000ml capacity
SCILOGEX D500 Homogenizer, 100-5000ml capacity SCILOGEX D500 Homogenizer Package - Drive Motor, DS-500/2 20mm diaGenerator, with S20F/ER20 flat head-open slot fine generator, 215mm immerse length, for water in oil or oil in water emulsions, volumes 10- 5000ml and with H-600 stand 110V, 60Hz CILOGEX D500 Homogenizer Package - Drive Motor, DS-500/1 20mm dia. Generator, with S20C/SR20 flat head-open slot coarse generator, 215mm immerse length, for solid/liquid media, volumes 10-5000ml and with H-600 stand, 110V, 60Hz Scilogex D500 Homogenizer Drive Motor, 110V/60Hz, US Plug Motor only
$2,141.29 - $2,927.42
Scilogex DS-160 Saw-Tooth Generator Probe for D-160
Scilogex DS-160 Saw-Tooth Generator Probe for D-160 DS-160/T5 Dia 5mm x L 50mm saw-tooth generator probe for D-160, for tissue, volumes 0.1-50ml DS-160/T7 Dia 7mm x L 130mm saw-tooth generator probe for D-160, for tissue, volumes 1-50ml DS-160/T10 Dia 10mm x L 115mm saw tooth generator probe for D-160, for tissue, volumes 1-250ml DS-160/T14 Dia 14mm x L 130mm saw tooth generator probe for D-160, for tissue, volumes 100-1000ml
$493.82 - $1,295.56
Scilogex Homogenizer Stand
Scilogex Homogenizer Stand(Stand ONLY - Homogenizer NOT Included)This is the Scilogex Homogenizer Stand for the Sciligoex model D160 and D500 homogenizers. This stand is made out of aluminum and features adjustable height knobs and clamp for the homogenizer and the applications needs.
$510.84 - $1,393.47
Scilogex D160 Homogenizer Package
Scilogex D160 Homogenizer Package 0.1-50ml Homogenizer Package DS-160/5 5mm dia. generator - SCILOGEX D160 Homogenizer Package - Drive Motor, DS-160/5 5mm dia. generator, flat head-open slot, 50mm immerse length, H-370 stand, for solid/liquid media, volumes 0.1-50ml, 110V, 60Hz. 1-250ml Homogenizer Package DS-160/10 10mm dia. generator - SCILOGEX D160 Homogenizer Package -Drive Motor, DS-160/10 10mm dia. generator, flat head-open slot, 115mm immerse length, H-370 stand, for solid/liquid media, volumes 1- 250ml, 110V, 60Hz Motor Only SCILOGEX D160 Homogenizer Drive Motor, 110V/60Hz
$292.32 - $1,375.02
Harvest Right Standard Vacuum Oil Pump 7CFM
Harvest Right Standard Vacuum Oil Pump 7CFM Technical SpecificationsVoltage: Standard 115V. 60Hz Plug: US 110V Intake Port: 3/4 JIC flare Dimensions: 10-1/2″ H x 16″ D x 5-3/4″ W Weight: 35lbs Warranty: 6 months
$418.61
Pump Part - MVP - 60 PSI, 150 PSI & Liquid - Cap Screw - Hex Head - M6x16mm
Pump Part - MVP - 60 PSI, 150 PSI & Liquid - Cap Screw - Hex Head - M6x16mm All sales final
$7.80
Adapter from VE filters to BVV/CPS pumps
This adapter will fit the exhaust ports on BVV VRD series vacuum pumps and adapt them to fit our BVV carbon exhaust filter.
$21.29
3000mL Single Neck RBF, 35/25 Socket Joint
3000mL Single Neck RBF, 35/25 Socket Joint Round bottom, HEAVY WALL single short neck flask with a spherical socket joint. Flasks having a 35/20 socket joint are used as replacements for the collection flask on rotary evaporators.
$376.04
5000mL Single Neck RBF, 35/25 Socket Joint
5000mL Single Neck RBF, 35/25 Socket Joint Round bottom, HEAVY WALL single short neck flask with a spherical socket joint. Flasks having a 35/20 socket joint are used as replacements for the collection flask on rotary evaporators.
$411.51
Fast-Acting Panel-Mount On/Off Valve
Fast-Acting Panel-Mount On/Off Valve Open and close these valves with the flip of the toggle switch. Commonly used for equipment testing and gas sampling, they have threads and a hex nut below the handle for installation in instrument panels. 316 stainless steel valves are more corrosion-resistant than brass valves. Manual-return valves remain open or closed when the toggle is moved into position. Spring-return valves automatically close when the toggle is released. Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet. Pipe Size Flow Coefficient (Cv) Max. Pressure Temperature RangeDegrees F Toggle Switch Type End-to-EndLg Panel Cutout Dia 1/4 .2 300 psi @ 200 degrees F -20 degrees to 200 degrees Manual Return 2 1/4" 17/32"
$134.81
1" Insulon Vacuum Jacketed Hose, Low Pressure
1" Insulon Vacuum Jacketed Hose, Low Pressure Technical Specifications: Hose Size 1” ID DN (ISO 10380) 25 Product Category LP (Low Pressure) Inner Hose ID 0.984” Tube Stub OD 1.000” Tube Stub Thickness 0.065” Outer Hose OD 1.95” Static Bend Radius 5.08” Dynamic Bend Radius 13.39” Lengths 2 – 20’ Operating Temperature -270°C to 900°C (-454°F to 1652°F) Material 316L stainless steel Maximum Allowable Working Pressure (MAWP) by Temperature: Product Category Hose Size Max Temperature (C) Max Temperature (F) MAWP (PSI) Low Pressure (LP) 1" ID 21 70 43 Low Pressure (LP) 1" ID 66 150 40 Low Pressure (LP) 1" ID 93 200 38 Low Pressure (LP) 1" ID 121 250 37 Low Pressure (LP) 1" ID 149 300 36 Low Pressure (LP) 1" ID 166 330 35 Low Pressure (LP) 1" ID 204 400 34 Low Pressure (LP) 1" ID 232 450 34 Low Pressure (LP) 1" ID 260 500 33 Low Pressure (LP) 1" ID 316 600 33 Low Pressure (LP) 1" ID 371 700 33 Low Pressure (LP) 1" ID 427 800 32 Low Pressure (LP) 1" ID 482 900 32 Low Pressure (LP) 1" ID 538 1000 31 Low Pressure (LP) 1" ID 593 1100 29 Low Pressure (LP) 1" ID 649 1200 26 Low Pressure (LP) 1" ID 704 1300 24 Low Pressure (LP) 1" ID 760 1400 21 Low Pressure (LP) 1" ID 816 1500 17 Low Pressure (LP) 1" ID 899 1650 11
$441.31 - $2,212.24
3/4" Insulon Vacuum Jacketed Hose, Low Pressure
3/4" Insulon Vacuum Jacketed Hose, Low Pressure Technical Specifications: Hose Size 3/4” ID DN (ISO 10380) 20 Product Category LP (Low Pressure) Inner Hose ID 0.787” Tube Stub OD 0.750” Tube Stub Thickness 0.049” Outer Hose OD 1.62” Static Bend Radius 4.1” Dynamic Bend Radius 11.81” Lengths 2 – 20’ Operating Temperature -270°C to 900°C (-454°F to 1652°F) Material 316L stainless steel Maximum Allowable Working Pressure (MAWP) by Temperature: Product Category Hose Size Max Temperature (C) Max Temperature (F) MAWP (PSI) Low Pressure (LP) 3/4" ID 21 70 43 Low Pressure (LP) 3/4" ID 66 150 40 Low Pressure (LP) 3/4" ID 93 200 38 Low Pressure (LP) 3/4" ID 121 250 37 Low Pressure (LP) 3/4" ID 149 300 36 Low Pressure (LP) 3/4" ID 166 330 35 Low Pressure (LP) 3/4" ID 204 400 34 Low Pressure (LP) 3/4" ID 232 450 34 Low Pressure (LP) 3/4" ID 260 500 33 Low Pressure (LP) 3/4" ID 316 600 33 Low Pressure (LP) 3/4" ID 371 700 33 Low Pressure (LP) 3/4" ID 427 800 32 Low Pressure (LP) 3/4" ID 482 900 32 Low Pressure (LP) 3/4" ID 538 1000 31 Low Pressure (LP) 3/4" ID 593 1100 29 Low Pressure (LP) 3/4" ID 649 1200 26 Low Pressure (LP) 3/4" ID 704 1300 24 Low Pressure (LP) 3/4" ID 760 1400 21 Low Pressure (LP) 3/4" ID 816 1500 17 Low Pressure (LP) 3/4" ID 899 1650 11
$410.09 - $1,951.14
1/2" Insulon Vacuum Jacketed Hose, Low Pressure
1/2" Insulon Vacuum Jacketed Hose, Low Pressure Technical Specifications: Hose Size 1/2” ID DN (ISO 10380) 12 Product Category LP (Low Pressure) Inner Hose ID 0.472” Tube Stub OD 0.500” Tube Stub Thickness 0.035” Outer Hose OD 1.27” Static Bend Radius 3.33” Dynamic Bend Radius 10.24” Lengths 2 – 20’ Operating Temperature -270°C to 900°C (-454°F to 1652°F) Material 316L stainless steel Maximum Allowable Working Pressure (MAWP) by Temperature: Product Category Hose Size Max Temperature (C) Max Temperature (F) MAWP (PSI) Low Pressure (LP) 1/2" ID 21 70 72 Low Pressure (LP) 1/2" ID 66 150 67 Low Pressure (LP) 1/2" ID 93 200 64 Low Pressure (LP) 1/2" ID 121 250 62 Low Pressure (LP) 1/2" ID 149 300 60 Low Pressure (LP) 1/2" ID 166 330 58 Low Pressure (LP) 1/2" ID 204 400 56 Low Pressure (LP) 1/2" ID 232 450 56 Low Pressure (LP) 1/2" ID 260 500 55 Low Pressure (LP) 1/2" ID 316 600 55 Low Pressure (LP) 1/2" ID 371 700 55 Low Pressure (LP) 1/2" ID 427 800 54 Low Pressure (LP) 1/2" ID 482 900 53 Low Pressure (LP) 1/2" ID 538 1000 53 Low Pressure (LP) 1/2" ID 593 1100 48 Low Pressure (LP) 1/2" ID 649 1200 44 Low Pressure (LP) 1/2" ID 704 1300 40 Low Pressure (LP) 1/2" ID 760 1400 35 Low Pressure (LP) 1/2" ID 816 1500 28 Low Pressure (LP) 1/2" ID 899 1650 18
$368.94 - $1,663.08
Part A 2" Stubby NPT to Cam Lock Adaptor
Part A 2" Stubby NPT to Cam Lock Adaptor This adapter converts 2" (50mm) male NPT pipe threads to a 2" male camlock. The adapter incorporates female NPT threads on one end and male camlock (also known as a quick disconnect or QD) on the other for connecting pipes and valves with different ends. Made of tough polypropylene (PP), this adapter also incorporates an ethylene propylene diene monomer (EPDM) gasket for a leak-tight connection. Shallow profile ensures valve does not protrude past IBC tote cage. Key benefits: Converts 2" male NPT pipe thread to a 2" male camlock 2" long profile does not protrude past IBC cage during transport Made of PP EPDM gasket ensures a secure seal Suitable for use in a wide variety of liquid handling applications Proudly Made in the USA Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Disclaimer: This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. Material PP Dimensions 2.4" Dia. x 1.02" H Weight 0.1 lbs. Case Pack 200 ea. Case Dimensions 15" L x 15" W x 16" H Case Weight 20 lbs. Pallet Pack 6,000 ea. (30 Cases) Pallet Dimensions 40" L x 48" W x 60" H Pallet Weight 600 lbs. Country of Manufacture United States Gasket EPDM Rubber Gasket
$22.70
Adapters M24x1.5 female to NPT 1/2" male
Adapters M24x1.5 female to NPT 1/2" male 2 Adapters M24x1.5 female to NPT 1/2″ male
$427.12
Adapter 8890069 M24x1.5 m to M30x1.5 f
Adapter 8890069 M24x1.5 m to M30x1.5 f 2 Adapters M24x1.5 male to M30x1.5 female
$624.36
Adapter M30x1.5 male to male
Adapter M30x1.5 male to male Adapter M30x1.5 male to male
$269.61
Huber adapter M16x1f-1/2"m
Huber adapter M16x1f-1/2"m Adapter M16x1 f - R1/2 m Adapter M16x1 f - R1/2 m M16x1 female thread to R1/2 male thread
$191.57
Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump
Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details Explosion Proof Motor 110-120V/208-240V 60Hz 1 Phase The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits: Runs 10°C cooler than comparable pumps. Slows corrosion. Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals. Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection. Suitable applications include freeze drying, degassing, vacuum ovens and concentrators. 3046E-01 comes with an explosion proof motor. Conduit wiring installation required. No cord, plug, or switch provided. Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr. Specifications Application CRVpro4 Free Air Displacement @ 60 Hz, cfm (L/min) 2.8 (78) Free Air Displacement @ 50 Hz, m³/hr (L/min) 4 (67) Ultimate Pressure, torr (mbar) 5x10⁻⁴ (4x10⁻⁴) Noise Level, dBA 50 Motor Speed, RPM, @60Hz, @50Hz 1740 (1450) Motor Power, HP (kW) 0.4 (0.5) Oil Capacity, mL 1150 Connection Flanges NW 16 Inlet Hose Connection* 5/8" to 3/4" Weight, lbs (kg) 46.3 (21) Dimensions, LxWxH, in (mm) 18.2x6.1x9.1 (463x157x230)
$6,626.78
Welch CRVpro Direct Drive Rotary Vane Vacuum Pump CRVpro6
Welch CRVpro Direct Drive Rotary Vane Vacuum Pump CRVpro6 ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits: Runs 10°C cooler than comparable pumps. Slows corrosion. Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals. Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection. Suitable applications include freeze drying, degassing, vacuum ovens and concentrators. 3061-01 is wired for North American 115V, 60Hz operation. Includes North American line cord, vacuum inlet hose barb suitable for gum rubber hose from 5/8" to 3/4" ID, and a charge of oil. 3062-01 is wired for North American 230V, 60Hz operation. Includes 230V North American line cord, UK cord, and skuko cord, and a charge of oil. Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr.
$5,268.79
The Prodigy
THE PRODIGY Description: 24CFM Single Stage 7.5HP 220V – 3 Phase (Single Phase Inverters Available) Inlet: 1.5” Triclamp Outlet: 1.5” Triclamp Weight: 750lbs Max bearing pressure: 250psi Max discharge pressure: 150psi Max delta pressure: 10x Many factors go into the rate of recovery on an extraction system. Not only is the pump size important, but also the evaporation rate of the solvents. If the solvents aren’t able to evaporate fast enough there will be nothing for the pump to transfer. Larger pumps have the capacity to transfer solvents faster, but only if the solvents are in an evaporated state. Because these pumps are so large they have a tendency to outpace the evaporation rate of most extraction systems. This lowers the inlet pressure (and the collection vessel pressures) which aids in speeding up the evaporation rate. Propane weighs less per gallon than butane (4.2 vs 4.9), however the vapor pressure is higher which generally results in a higher inlet pressure, and therefor a faster recovery per pound of gas used. These pumps are sized large enough to recover on the largest extraction systems with the highest evaporation rates, or can be used on multiple extraction systems at one time. For example this pump was used to recover 5lbs of butane on a 6” vessel with 70° of temperature. The process took ~12 minutes. However increasing the process to 3x 6” vessels with 5lbs of butane each(15lbs total), the process also took ~12 minutes. This is because the pump exceeds the evaporation rate of a single 6” column at 70° by more than 3x. Because the pump exceeds the evaporation rate a vacuum is pulled against the collection vessel, which in turn speeds up the evaporation rate. However once vacuum equilibrium is achieved, increasing the pump size will not speed up the process, but will allow for larger (or multiple) processes to be preformed in the same time frame. The next tab shows a table of recovery capacity with regards to inlet pressures. Higher inlet pressures result in substantially faster recovery times. Higher inlet pressures can be achieved by evaporating solvents faster by higher temperatures in collection vessels, or more surface area in collection vessels (larger diameter vessels, falling film, etc). Inlet Pressure LBS per Minute Butane LBS per Minute Propane -13 psi (Vacuum) .48 .35 -10 psi (Vacuum) .96 .7 -7 psi (Vacuum) 1.92 1.4 -4 psi (Vacuum) 2.88 2.09 0 psi 3.84 2.79 15 psi 7.69 5.59 29 psi 11.53 8.38
$21,285.14
The Prophet
The Prophet The Prophet is the industries largest and fastest LPG recovery pump. This mammoth pumps at 28 cfm (3.33x the size of a Corken T91) while running quietly at only 68db. Unlike the other recovery pumps available on the market this pump features a dual stage design which allows for greater delta pressure between the inlet and outlet of the pump. This allows for higher output pressures (propane) and lower inlet pressures (vacuum). The ability to pull vacuum against the inlet lowers the boiling point of the recovering solvents allowing them to vaporize faster, speeding up your recovery times. In addition, this pump can be used to pull initial vacuum in the extraction system. 28CFM Dual Stage 10HP Inlet: 1.5” Triclamp Outlet: 1.5” Triclamp Weight: 865lbs Max bearing pressure: 250psi Max discharge pressure: 150psi Max delta pressure: 10x Many factors go into the rate of recovery on an extraction system. Not only is the pump size important, but also the evaporation rate of the solvents. If the solvents aren’t able to evaporate fast enough there will be nothing for the pump to transfer. Larger pumps have the capacity to transfer solvents faster, but only if the solvents are in an evaporated state. Because these pumps are so large they have a tendency to outpace the evaporation rate of most extraction systems. This lowers the inlet pressure (and the collection vessel pressures) which aids in speeding up the evaporation rate. Propane weighs less per gallon than butane (4.2 vs 4.9), however the vapor pressure is higher which generally results in a higher inlet pressure, and therefor a faster recovery per pound of gas used. These pumps are sized large enough to recover on the largest extraction systems with the highest evaporation rates, or can be used on multiple extraction systems at one time. For example this pump was used to recover 5lbs of butane on a 6” vessel with 70° of temperature. The process took ~12 minutes. However increasing the process to 3x 6” vessels with 5lbs of butane each(15lbs total), the process also took ~12 minutes. This is because the pump exceeds the evaporation rate of a single 6” column at 70° by more than 3x. Because the pump exceeds the evaporation rate a vacuum is pulled against the collection vessel, which in turn speeds up the evaporation rate. However once vacuum equilibrium is achieved, increasing the pump size will not speed up the process, but will allow for larger (or multiple) processes to be preformed in the same time frame. The next tab shows a table of recovery capacity with regards to inlet pressures. Higher inlet pressures result in substantially faster recovery times. Higher inlet pressures can be achieved by evaporating solvents faster by higher temperatures in collection vessels, or more surface area in collection vessels (larger diameter vessels, falling, etc). Inlet Pressure LBS per Minute Butane LBS per Minute Propane -13 psi (Vacuum) .56 .41 -10 psi (Vacuum) 1.12 .81 -7 psi (Vacuum) 2.24 1.63 -4 psi (Vacuum) 3.36 2.44 0 psi 4.49 3.26 15 psi 8.97 6.52 29 psi 13.46 9.77
$25,542.18
Glas-Col 22L Stir Mantle
Glas-Col 22L Stir Mantle Safely and accurately heat solutions used in various distillations in laboratory and scientific applications Apply heat directly and uniformly to containers, such as round bottom flasks More accurate than hot plates and safer than Bunsen burners Controllers can be purchased individually Accommodates 22L spherical flasks Specifications & Description Max Flask Size (mL) 22000 Min Stirrer Speed (rpm) 100 Max Stirrer Speed (rpm) 1850 Max temperature (° F) 752 Max temperature (° C) 400 Power (VAC) 115 Power (watts) 1540 Height (in) 14 Diameter (in) 6.875 Outside Diameter (OD) (in) 19 Description Stirring/Heating Mantle, 22L Spherical Flask; 115V
$2,696.12
Glas-Col 2 L Stir Mantle
Glas-Col 2 L Stir Mantle Specifications Material aluminum housed Max temperature C 400 Height (in) 6 Outside Diameter (od)(in) 12 Capacity 2 L Volts 115 Watts 500 Includes: Separable 4-ft., 2-wire cord and locking connector.
$2,120.00
Polyscience 5 Liter General Purpose Water Bath
Polyscience 5 Liter General Purpose Water Bath Key Features: Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads Specifications Working Temperature Range °F Ambient +10° to 212° Reservoir Capacity (liters) 5 Reservoir/Tank Material Stainless Steel Reservoir Cover Hinged Gable Working Access (L x W x D) (inches) 5 x 10.8 x 6 Temperature Stability °F ±0.2° Display 3.25" Flammability Class (DIN 12876-1) I (NFL) Over-Temperature Protection / Failsafe Heater Control Yes Maximum Ambient Temperature °F 104° Overall Dimensions (L x W x H) (inches) 12 x 14.5 x 13.5 Shipping Weight (pounds) 14.0 60Hz Only Part Number WB02A11B Included Hardware Sample Tray Heater Wattage 120 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/1.1 Regulatory Approvals ETL
$1,159.33$851.41
Candyworx Depositmore™ JR - Gummy Depositor USA Made
An efficient, repeatable, flexible depositor for “anything that pours!” This single pump unit is capable of 720-1020* pieces per hour. Works great for dispensing gelatin based product, soft candy, chocolate, and more! The DM JR includes heated components to prevent any clogging and its easy-to-build design makes disassembly a breeze. The unit can be operated both automated or manually. Made in the USA. Check out our Cut Sheet for more info! Depositmore™ Cut Sheet
$14,190.11$10,642.58
2" Footmaster Leveling Caster Ivory - 550lb cap
2" Footmaster Leveling Caster Ivory This ingenious product combines the mobility of a caster, the height adjustability of a level mount, and the stability of a foot pad. The GD Series leveling caster profile is integral to its function. A thick aluminum frame is used to achieve the combination of being both strong and compact. The swivel section contains 2 sets of ball bearings for easy maneuverability. Bearing raceway sleeves made from hardened steel prevent scouring to the aluminum frame, leading to high performance and dependable reliability. Moving is easy thanks to a 50 mm diameter wheel mated with an axle shaft made of cold forged steel. And once positioned, the caster provides side access to an ABS thermoplastic thumbwheel used to lower the foot pad. As the wheel is lifted off the ground, the foot pad takes over to make the application completely stationary. Making the fine adjustments to achieve the perfect level set, even under heavy loads, is light work for this world renowned leveling caster. When it is time to move again, simply raise the foot pad to restore the freedom of mobility.
$141.90
WFE Rack 8
Extruded Aluminum Framing Rack This rack is constructed of 1.5" extruded aluminum framing. This framing has slots that can be used for a wide variety of mounting hardware. This large rack is a good size to contain a wiped film or similar distillation equipment, along with three laboratory heaters/chillers stacked on the right side. The rack has six swivel casters for smooth transport with locking wheels in the corners. NOTE: This rack ships unassembled. Allow 6 hours for assembly
$5,534.14
Welch Diaphragm Replacement Kit
Welch Diaphragm Replacement Kit Diaphragm pumps require rebuild and seal replacements. Sku Specifications 2047k-02 Two Head Service Kits for Models: 2032 2042 2047 2522K-01 Service Kit ConRod For 2522B-01 2546K-03 SERVICE KIT 2546B-01/C-01/C-02, 2534C-02, 2522C-05
$322.12 - $790.39
Enclosed Motor Switch Hazardous-Location - UL Listed / CSA Certified for MVP Recovery Pumps
Enclosed Motor Switch Hazardous-Location - UL Listed / CSA Certified for MVP Recovery Pumps This motor switch is designed for hazardous environments where ignitable gas and dust may be present. They're rated NEMA 7 and 9 for hazardous locations. Use them to turn motors on and off, or with other circuits such as lighting and electric heat circuits. They do not provide overload protection. This item also includes a 1" Male x 3/4" Female NPSM bushing and 1/2" Pipe nipple for steel conduit. Specifications Switch Type Motor Control Reversing Capability Nonreversing Number of Circuits Controlled 2 Electrical Phase (hp) Single (3 hp @ 240 V AC) Switch Starting Position 2 Off (Normally Open) Switch Action Stays Switched (Maintained) Industry Designation DPST-NO Switching: Current 30 A Voltage 600V AC Housing: Material Painted Aluminum Color Gray Height 6.5" Width 3" Depth 4.3" Number of Mounting Holes 2 Mounting Hole Diameter 0.31" Mounting Fasteners Included No Wire Connection Type Screw Terminals Environment Hazardous Location Environment Rating NEMA 7, NEMA 9 Specifications Met UL Listed, CSA Certified RoHS Not Compliant REACH Not Compliant DFARS Specialty Metals COTS-Exempt Country of Origin Mexico
$567.60
Pump Part - MVP - Liquid - Viton Seat
Pump Part - MVP - Liquid - Viton Seat All sales final
$170.99
Pump Part - MVP - Liquid - Center Section
Pump Part - MVP - Liquid - Center Section All sales final
$2,483.27
Pump Part - MVP - Liquid - Gear Reducer
Pump Part - MVP - Liquid - Gear Reducer All sales final
$3,050.87
Pump Part - MVP - Liquid - Manifold Assembly Kit
Pump Part - MVP - Liquid - Manifold Assembly Kit All sales final
$2,270.42
Pump Part - MVP - Liquid - Fluid Cover Kit
Pump Part - MVP - Liquid - Fluid Cover Kit All sales final
$1,929.85
Pump Part - MVP - 150 PSI & Liquid - Stand Legs
Pump Part - MVP - 150 PSI & Liquid - Stand Legs All sales final
$893.98
Pump Part - MVP - 150 PSI & Liquid - Stand Bracket
Pump Part - MVP - 150 PSI & Liquid - Stand Bracket All sales final
$383.84
1/4" Brass Hose Barb Union
1/4" Brass Hose Barb Union This union will connect two 1/4" ID hoses.
$2.13
PBS Industries EXT101012 Extraction Room
PBS Industries EXT101012 Extraction Room (1) Model EXT101012 Extraction Room Interior working dimensions: 10'-0" wide X 10'-0" tall X 12'-0" long. Approximate overall dimensions: 10'-4" wide X 10'-2" tall X 14'-4" long. Scope: Clean air flows into the room through the filtered ceiling at the front, passing through the work area, and exits through the exhaust plenum located in the rear of the room. Air is drawn through the exhaust plenum and discharged upward into the atmosphere via the exhaust stack(s). Panels: Panels are fabricated from 18-gauge quality galvanized steel, flanged and precision punched on 6" centers. Panels are fastened together with 5/16 bolts for maximum rigidity. Panel seams and any penetration holes added for extraction equipment must be sealed with provided non-flammable caulk. Meets ATMC-838 Specifications. A total of (2) Explosion Proof light fixtures will be provided for illumination: Lighting is provided by 48" long, 3-row, 73 watts, C1D1 LED lights. Fixtures are rated for Class I Div. 1 area (Explosion Proof) group C and D. All fixtures are UL844 listed and approved for their intended use and placement. Lights will accept either 120V or 277V power and carries a 5-year limited warranty. (1) - 18” 1.5 HP Exhaust fan rated for 4,000 CFM @ 0.5” Static PressureTotal CFM exhausted: 4,000 CFM. (UL Listed, Explosion Proof Motor) A precision balanced, fabricated, tube axial type duct fan with aluminum non-sparking fan blade moves air through the fan. Bearings are mounted in rubber isolators for smooth operation. The motor, drive, and bearings are isolated from the exhaust air stream. The bearings are sized with a minimum average life, per AFBMA, in excess of 200,000 hours when operating at the maximum RPM of the fan size. Design Note: Air flow is calculated at approximately 3 air changes per minute. Infrared Gas Detection System: Control panel is housed in a NEMA 4X enclosure that is waterproof, chemical and weather resistant. The control box includes an audible and visual alarm to alert personnel of gas detection including gas type and concentration level. When gas is detected above the appropriate setting the exhaust fan will increase to full speed to purge gas from the room. UL Listed infrared transmitter – Detects combustibles and CO2. Explosion Proof Construction with non-intrusive calibration and is rated for Class 1 Div. 1 Groups B, C, D. (1) - Personnel access door(s): Personnel access door(s) are double wall 18-Ga. galvanized steel units sized at 36" x 84” and are provided pre-hung in a heavy gauge steel frame ready for mounting to the room. The mounting hardware includes an observation window, FM approved panic type safety latch and two 6" door pulls. Room also includes a door closing device that is UL Listed and ADA compliant. Closer can be mounted on the interior or exterior as well as the left or right side of the door. Door closer is constructed of aluminum and is ANSI A156.4 compliant. UL/ ETL Listed Control Equipment: A NEMA12 enclosure pre-wired and tested by manufacturer for simple hookup. Control panel includes main disconnect switch, class 10 motor protection, light contactor, fuse block, and field wiring terminal strip to easily connect interlock circuits such as door limit switches, and fire suppression. Includes fan failure alarm circuit and auto fan override relay. The class 10 motor protector offers maximum motor protection by being individually calibrated for the smallest and largest current it can handle and includes automatic ambient temperature compensation over a range of -13F to +140F. Code Compliance: All PBS extraction rooms are designed to meet or exceed the requirements and recommendations of the National Fire Protection Association (NFPA), Codes: NFPA 1-2018, 33, 55-2016, 58-2020, 70-2017, 497-2017. NEMA 250-2018. ASME BPVC VIII Div. 1-2019, IBC. IFC-2018. IMC as well as the Occupational Health and Safety Administration (OSHA) CFR 29.1910.107 covering the operation and construction of ventilated rooms. All PBS extraction rooms are peer reviewed and UL 1389 compliant with regard to component operation, placement and intended use.
$38,825.55 - $56,760.42
PBS Industries EXT10815 Extraction Room
PBS Industries EXT10815 Extraction Room (1) Model EXT10815 Extraction Room Interior working dimensions: 10'-0" wide X 8'-0" tall X 15'-0" long. Approximate overall dimensions: 10'-4" wide X 8'-2" tall X 17'-4" long. Scope: Clean air flows into the room through the filtered ceiling at the front, passing through the work area, and exits through the exhaust plenum located in the rear of the room. Air is drawn through the exhaust plenum and discharged upward into the atmosphere via the exhaust stack(s). Panels: Panels are fabricated from 18-gauge quality galvanized steel, flanged and precision punched on 6" centers. Panels are fastened together with 5/16 bolts for maximum rigidity. Panel seams and any penetration holes added for extraction equipment must be sealed with provided non-flammable caulk. Meets ATMC-838 Specifications. A total of (3) Explosion Proof light fixtures will be provided for illumination: Lighting is provided by 48" long, 3-row, 73 watts, C1D1 LED lights. Fixtures are rated for Class I Div. 1 area (Explosion Proof) group C and D. All fixtures are UL844 listed and approved for their intended use and placement. Lights will accept either 120V or 277V power and carries a 5-year limited warranty. (1) - 18” 1.5 HP Exhaust fan rated for 4,000 CFM @ 0.5” Static PressureTotal CFM exhausted: 4,000 CFM. (UL Listed, Explosion Proof Motor) A precision balanced, fabricated, tube axial type duct fan with aluminum non-sparking fan blade moves air through the fan. Bearings are mounted in rubber isolators for smooth operation. The motor, drive, and bearings are isolated from the exhaust air stream. The bearings are sized with a minimum average life, per AFBMA, in excess of 200,000 hours when operating at the maximum RPM of the fan size Design Note: Air flow is calculated at approximately 3 air changes per minute. Infrared Gas Detection System: Control panel is housed in a NEMA 4X enclosure that is waterproof, chemical and weather resistant. The control box includes an audible and visual alarm to alert personnel of gas detection including gas type and concentration level. When gas is detected above the appropriate setting the exhaust fan will increase to full speed to purge gas from the room. UL Listed infrared transmitter – Detects combustibles and CO2. Explosion Proof Construction with non-intrusive calibration and is rated for Class 1 Div. 1 Groups B, C, D. (1) - Personnel access door(s): Personnel access door(s) are double wall 18-Ga. galvanized steel units sized at 36" x 84” and are provided pre-hung in a heavy gauge steel frame ready for mounting to the room. The mounting hardware includes an observation window, FM approved panic type safety latch and two 6" door pulls. Room also includes a door closing device that is UL Listed and ADA compliant. Closer can be mounted on the interior or exterior as well as the left or right side of the door. Door closer is constructed of aluminum and is ANSI A156.4 compliant. UL/ ETL Listed Control Equipment: A NEMA12 enclosure pre-wired and tested by manufacturer for simple hookup. Control panel includes main disconnect switch, class 10 motor protection, light contactor, fuse block, and field wiring terminal strip to easily connect interlock circuits such as door limit switches, and fire suppression. Includes fan failure alarm circuit and auto fan override relay. The class 10 motor protector offers maximum motor protection by being individually calibrated for the smallest and largest current it can handle and includes automatic ambient temperature compensation over a range of -13F to +140F. Code Compliance: All PBS extraction rooms are designed to meet or exceed the requirements and recommendations of the National Fire Protection Association (NFPA), Codes: NFPA 1-2018, 33, 55-2016, 58-2020, 70-2017, 497-2017. NEMA 250-2018. ASME BPVC VIII Div. 1-2019, IBC. IFC-2018. IMC as well as the Occupational Health and Safety Administration (OSHA) CFR 29.1910.107 covering the operation and construction of ventilated rooms. All PBS extraction rooms are peer reviewed and UL 1389 compliant with regard to component operation, placement and intended use.
$56,743.40
PBS Industries EXT10812 Extraction Room
PBS Industries EXT10812 Extraction Room PBS Industries, LLC is pleased to offer the following proposal for your consideration. (1) Model EXT10812 l Extraction Room Interior working dimensions: 10'-0" wide X 8'-0" tall X 12'-0" long. Approximate overall dimensions: 10'-4" wide X 8'-2" tall X 14'-4" long. Scope: Clean air flows into the room through the filtered ceiling at the front, passing through the work area, and exits through the exhaust plenum located in the rear of the room. Filtered exhaust air is drawn through the exhaust plenum and discharged upward into the atmosphere via the exhaust stack(s). Panels: Panels are fabricated from 18-gauge quality galvanized steel, flanged and precision punched on 6" centers. Panels are fastened together with 5/16 bolts for maximum rigidity. Panel seams and any penetration holes added for extraction equipment must be sealed with provided non-flammable caulk. Meets ATMC-838 Specifications. A total of (1) Explosion Proof light fixtures will be provided for illumination: Lighting is provided by 4’ long, 3-Row, 68 watt, LED fixture. Fixture is rated for Class I Div. 1 area (Explosion Proof) group C and D. All fixtures are UL844 listed and approved for their intended use and placement. Fixtures are supplied with 120V-277V power, diffused optic, powder coated black, and carry a 5-year limited warranty. (1) - 18” .75 HP Exhaust fan rated for 3,000 CFM @ 0.5” Static Pressure Total CFM exhausted: 3,000 CFM. (UL Listed, Explosion Proof Motor) A precision balanced, fabricated, tube axial type duct fan with aluminum non-sparking fan blade moves air through the fan. Bearings are mounted in rubber isolators for smooth operation. The motor, drive, and bearings are isolated from the exhaust air stream. The bearings are sized with a minimum average life, per AFBMA, in excess of 200,000 hours when operating at the maximum RPM of the fan size. Design Note: Purge air flow is calculated at approximately 3 air changes per minute. Constant operational airflow is approximately 800-1000 CFM. Infrared Gas Detection System: Control panel is housed in a NEMA 4X enclosure that is waterproof, chemical and weather resistant. The control box includes an audible and visual alarm to alert personnel of gas detection including gas type and concentration level. When gas is detected above the appropriate setting the exhaust fan will increase to full speed to purge gas from the room. UL Listed infrared transmitter – Detects combustibles or CO2. Sensor is pre-calibrated for your specific gas or solvent requirement. Explosion Proof Construction with non-intrusive calibration and is rated for Class 1 Div. 1 Groups B, C, D. Contact us should multiple gases or solvents be required. (1) - Personnel access door(s): Personnel access door(s) are double wall 18-Ga. galvanized steel units sized at 36" x 84” and are provided pre-hung in a heavy gauge steel frame ready for mounting to the room. The mounting hardware includes an observation window, FM approved panic type safety latch and two 6" door pulls. Room also includes a door closing device that is UL Listed and ADA compliant. Closer can be mounted on the interior or exterior as well as the left or right side of the door. Door closer is constructed of aluminum and is ANSI A156.4 compliant. UL/ ETL Listed Control Equipment: A NEMA12 enclosure pre-wired and tested by manufacturer for simple hookup. Control panel includes main disconnect switch, class 10 motor protection, light contactor, fuse block, and field wiring terminal strip to easily connect interlock circuits such as door limit switches, and fire suppression. Includes fan failure alarm circuit and auto fan override relay. The class 10 motor protector offers maximum motor protection by being individually calibrated for the smallest and largest current it can handle and includes automatic ambient temperature compensation over a range of -13F to +140F. Code Compliance: All PBS extraction rooms are designed to meet or exceed the requirements and recommendations of the National Fire Protection Association (NFPA), Codes: NFPA 1-2018, 33, 55-2016, 58-2020, 70-2017, 497-2017. NEMA 250-2018. ASME BPVC VIII Div. 1-2019, IBC. IFC-2018. IMC as well as the Occupational Health and Safety Administration (OSHA) CFR 29.1910.107 covering the operation and construction of ventilated rooms. PBS extraction rooms are UL 1389 compliant with regard to component placement, operation, and intended use. Peer Review included. NOTE PLEASE: If you would like more than one ADD-on please contact us
$47,115.41
PBS Industries EXT8810 Extraction Room
PBS Industries EXT8810 Extraction Room PBS Industries, LLC is pleased to offer the following proposal for your consideration. (1) Model EXT8810 Extraction Room Interior working dimensions: 8'-0" wide X 8'-0" tall X 10'-0" long. Approximate overall dimensions: 8'-4" wide X 8'-2" tall X 12'-4" long. Scope: Clean air flows into the room through the filtered ceiling at the front, passing through the work area, and exits through the exhaust plenum located in the rear of the room. Air is drawn through the exhaust plenum and discharged upward into the atmosphere via the exhaust stack(s). Panels: Panels are fabricated from 18-gauge quality galvanized steel, flanged and precision punched on 6" centers. Panels are fastened together with 5/16 bolts for maximum rigidity. Panel seams and any penetration holes added for extraction equipment must be sealed with provided non-flammable caulk. Meets ATMC-838 Specifications. A total of (1) Explosion Proof light fixtures will be provided for illumination: Lighting is provided by 4’ long, 3-Row, 68 watt, LED fixture. Fixture is rated for Class I Div. 1 area (Explosion Proof) group C and D. All fixtures are UL844 listed and approved for their intended use and placement. Fixtures are supplied with 120V-277V power, diffused optic, powder coated black, and carry a 5-year limited warranty. (1) - 18” .75 HP Exhaust fan rated for 2,000 CFM @ 0.5” Static Pressure Total CFM exhausted: 2,000 CFM. (UL Listed, Explosion Proof Motor) A precision balanced, fabricated, tube axial type duct fan with aluminum non-sparking fan blade moves air through the fan. Bearings are mounted in rubber isolators for smooth operation. The motor, drive, and bearings are isolated from the exhaust air stream. The bearings are sized with a minimum average life, per AFBMA, in excess of 200,000 hours when operating at the maximum RPM of the fan size. Design Note: Purge air flow is calculated at approximately 3 air changes per minute. Constant operational airflow is approximately 800-1000 CFM. Infrared Gas Detection System:Control panel is housed in a NEMA 4X enclosure that is waterproof, chemical, and weather resistant. The control box includes an audible and visual alarm to alert personnel of gas detection including gas type and concentration level. When gas is detected above the appropriate setting the exhaust fan will increase to full speed to purge gas from the room. UL Listed infrared transmitter – Detects combustibles or CO2. Sensor is pre-calibrated for your specific gas or solvent requirement. Explosion Proof Construction with non-intrusive calibration and is rated for Class 1 Div. 1 Groups B, C, D. Contact us should multiple gases or solvents be required. (1) - Personnel access door(s): Personnel access door(s) are double wall 18-Ga. galvanized steel units sized at 36" x 84” and are provided pre-hung in a heavy gauge steel frame ready for mounting to the room. The mounting hardware includes an observation window, FM approved panic type safety latch and two 6" door pulls. Room also includes a door closing device that is UL Listed and ADA compliant. Closer can be mounted on the interior or exterior as well as the left or right side of the door. Door closer is constructed of aluminum and is ANSI A156.4 compliant. UL/ ETL Listed Control Equipment: A NEMA12 enclosure pre-wired and tested by manufacturer for simple hookup. Control panel includes main disconnect switch, class 10 motor protection, light contactor, fuse block, and field wiring terminal strip to easily connect interlock circuits such as door limit switches, and fire suppression. Includes fan failure alarm circuit and auto fan override relay. The class 10 motor protector offers maximum motor protection by being individually calibrated for the smallest and largest current it can handle and includes automatic ambient temperature compensation over a range of -13F to +140F. Code Compliance: All PBS extraction rooms are designed to meet or exceed the requirements and recommendations of the National Fire Protection Association (NFPA), Codes: NFPA 1-2018, 33, 55-2016, 58-2020, 70-2017, 497-2017. NEMA 250-2018. ASME BPVC VIII Div. 1-2019, IBC. IFC-2018. IMC as well as the Occupational Health and Safety Administration (OSHA) CFR 29.1910.107 covering the operation and construction of ventilated rooms. All PBS extraction rooms are peer reviewed and UL 1389 compliant with regard to component operation, placement and intended use. All PBS extraction rooms are designed to meet or exceed the requirements and recommendations of the National Fire Protection Association (NFPA), Codes: NFPA 1-2018, 33, 55-2016, 58-2020, 70-2017, 497-2017. NEMA 250-2018. ASME BPVC VIII Div. 1-2019, IBC. IFC-2018. IMC as well as the Occupational Health and Safety Administration (OSHA) CFR 29.1910.107 covering the operation and construction of ventilated rooms. All PBS extraction rooms are peer reviewed and UL 1389 compliant with regard to component operation, placement and intended use. NOTE PLEASE: If you would like more than one ADD-on please contact us
$39,926.70
Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting
Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting Overview Straight Pattern, High-Flow Make fine adjustments in low- or high- pressure, and low-, medium-, or high- flow applications with Swagelok metering valves that deliver accurate flow control when it matters in situations such as analytical or research applications. Safe Product Selection The complete catalog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Warning: Do not mix/interchange Swagelok products or components not governed by industrial design standards, including Swagelok tube fitting end connections, with those of other manufacturers. Specifications: BODY MATERIAL -316 Stainless Steel CONNECTION 1 SIZE - 3/8 in. CONNECTION 1 TYPE - Swagelok® Tube Fitting CONNECTION 2 SIZE - 3/8 in. CONNECTION 2 TYPE - Swagelok® Tube Fitting CLEANING PROCESS - Standard Cleaning and Packaging (SC-10) MAXIMUM TEMPERATURE °F (°C) - 400 (204) MINIMUM TEMPERATURE °F (°C) - -10 (-23) CV MAXIMUM - 0.15 Handle Style - Knurled
$312.18
10′ Fisher American Fume Hood
10′ Fisher American Fume Hood sku Fume Hood Exterior Dimensions: Work Area (Interior) Dimensions: Fume Hood Accessories: Width: Depth: Height: Width: Depth: Height: NLS-1013 120″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 110″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 2 ACID Cabinets 1 General Storage NLS-1014 120″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 110″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 x 48″ Flammable Storage 1 x 48″Acid Storage 1 x 24″ 1 Door 1 Drawer Cabinet NLS-1016 120″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 110″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 x 48″ Flammable Storage 1 x 48″ General Storage 1 x 24″ 1 Door 1 Drawer Cabinet NLS-1017 120″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 110″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 2 x 48″ Flammable Cabinets 1 x 24″ ACID Storage Cabinets
$24,761.73 - $36,539.52
8′ Fisher American Fume Hood
8′ Fisher American Fume Hood sku Fume Hood Exterior Dimensions: Work Area (Interior) Dimensions: Fume Hood Accessories: Width: Depth: Height: Width: Depth: Height: NLS-801 96″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 86″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 2 Flammable Cabinets NLS-806 96″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 86″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 2 General Storage Cabinets NLS-808 96″ / 8′ 48″ / 4′ 120″ / 10′ 86.5″ 39.5″ 114.5″ Door Opening: 86.5″ x 103″ (1) Light on/off switch (2) LED Light (1) AC Power Plug 120 v 20 amp (4) Sliding doors NLS-810 96″ 31.5″ 54.5″ and 89.5″ with cabinet 86″ 23″ 45″ 1 - Light on/off Switch 1 - AC Power Plug 1 - Cold Water Valve 1 - Gas Valve 1 - Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 - General Cabinets NLS-811 96″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 86″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 Acid Cabinet 1 General Cabinet NLS-812 96″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 86″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 2 ACID Cabinets NLS-813 96″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 86″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 Flammable Cabinet 1 Acid Cabinet NLS-814 96″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 86″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 Flammable Storage 1 General Storage NLS-815 96″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 86″ 23″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 2 Flammable Cabinets NLS-828 96″ 48″ 54 1/2″ and 89 1/2″ with cabinet 86″ 39″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 2 General Cabinets NLS-831 96″ 48″ 54 1/2″ and 89 1/2″ with cabinet 86″ 36″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 Flammable Cabinet 1 Acid Cabinet NLS-832 96″ 48″ 54 1/2″ and 89 1/2″ with cabinet 86″ 39″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 Flammable Cabinet 1 General Cabinet NLS-833 96″ 48″ 54.5″ and 89.5″ with cabinet 86″ 39″ 45″ (1) Light on/off Switch (1) AC Power Plug (1) Cold Water Valve (1) Gas Valve (1) Vertical Sliding Sash Door (2) Flammable Cabinets NLS-834 96″ 48″ 54 1/2″ and 89 1/2″ with cabinet 86″ 39″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 2 General Storage Cabinets NLS-836 96″ 48″ 54 1/2″ and 89 1/2″ with cabinet 86″ 39″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch2 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 2 ACID Cabinets NLS-837 96″ 48″ 54 1/2″ and 89 1/2″ with cabinet 86″ 39″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 Flammable Cabinet 1 ACID Cabinet NLS-838 96″ 48″ 54 1/2″ and 89 1/2″ with cabinet 86″ 39″ 45″ Door opening: 26″ Sash Doors: 4 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows. 1 Flammable Cabinet 1 General Cabinet NLS-839 96″ 48″ 54.5″ and 89.5″ with cabinet 86″ 39″ 45″ (1) Light on/off Switch (1) AC Power Plug (1) Cold Water Valve (1) Gas Valve (1) Vertical Sliding Sash Door (2) Flammable Cabinets NLS-840 96″ 31″ 89″ 86.5″ 23.5″ 81″ Door opening: 86.5″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 4 Vertical Sliding doors.
$14,119.16 - $33,329.72
5′ Fisher American Fume Hood
5′ Fisher American Fume Hood sku Fume Hood Exterior Dimensions: Work Area (Interior) Dimensions: Fume Hood Accessories: Width: Depth: Height: Width: Depth: Height: NLS-501 60″ 31.5″ 54.5″ and 89.5″ with cabinet 50″ 23″ 46″ 1 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 General Storage NLS-502 60″ 31.5″ 54.5″ and 89.5″ with cabinet 50″ 23″ 46″ 1 Light on/off Switch1 AC Power Plug1 Cold Water Valve1 Gas Valve1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows1 - 36″ ACID Storage1 - 24″ General Storage NLS-503 60″ 31.5″ 54.5″ and 89.5″ with cabinet 50″ 23″ 46″ 1 Light on/off Switch1 AC Power Plug1 Cold Water Valve1 Gas Valve1 - Vertical Sliding Sash Door with 2 horizontal sliding glass windows1 - 36″ Flammable Storage1 -24″ General Storage NLS-505 60″ 31.5″ 54.5″ and 89.5″ with cabinet 50″ 23″ 46″ 1 - Light on/off Switch1 - AC Power Plug1 - Cold Water Valve1 - Gas Valve1 - Vertical Sliding Sash Door with 2 horizontal sliding glass windows1 - General Storage NLS-506 60″ 31.5″ 54.5″ and 89.5″ with cabinet 50″ 23″ 46″ 1 - Light on/off Switch1 - AC Power Plug1 - Cold Water Valve1 - Gas Valve1 - Vertical Sliding Sash Door with 2 horizontal sliding glass windows1 - 36″ ACID Storage1 - 24″ General Storage NLS-507 60″ 31.5″ 54.5″ and 89.5″ with cabinet 50″ 23″ 46″ 1 - Light on/off Switch1 - AC Power Plug1 - Cold Water Valve1 - Gas Valve1 - Vertical Sliding Sash Door with 2 horizontal sliding glass windows1 - 36″ Flammable Storage1 - 24″ General Storage
$11,281.13 - $13,409.65
4′ Fisher American Fume
4′ Fisher American Fume sku Fume Hood Exterior Dimensions: Work Area (Interior) Dimensions: Fume Hood Accessories: Width: Depth: Height: Width: Depth: Height: NLS- 401 48″ 31.5″ 54.5″ 38″ 23″ 46″ 1 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 Flammable Storage NLS- 403 48″ 31 1/2″ 54.5″ and 89.5″ with cabinet 38″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 General Storage NLS- 404 48″ 31.5″ 54.5″ (89.5″ with acid cabinet) 38″ 23″ 46″ 1 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 ACID Storage NLS- 405 48″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 38″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 General Storage NLS- 406 48″ 31 1/2″ 54 1/2″ and 89 1/2″ with acid cabinet 38″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 ACID Storage NLS- 407 48″ 31.5″ 54.5″ and 89.5″ with cabinet 38″ 23″ 46″ 1 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 Flammable Storage NLS-408 48″ 31″ 89″ 39″ 23″ 81″ Door opening: 39″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 2 Vertical Sliding doors. NLS-409 48″ 48″ 89″ 39″ 39″ 81″ Door opening: 39″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 2 Vertical Sliding doors. NLS-416 48″ 48″ 54 1/2″ and 89 1/2″ with cabinet 38″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows. 1 General Storage NLS-417 48″ 48″ 54 1/2″ and 89 1/2″ with cabinet 38″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows. 1 ACID Storage NLS-419 48″ 48″ 54 1/2″ and 89 1/2″ with cabinet 38″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows. 1 General Storage NLS-420 48″ 48″ 54 1/2″ and 89 1/2″ with cabinet 38″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows. 1 ACID Storage
$9,862.12 - $18,376.19
You have seen 816 out of 833 products