END OF YEAR SUPER SALE UP TO 20% OFF STORE WIDE (12/22-1/5)

Shop Components

755 products

Filter

Show previous products

  • BVV™ Pro Series 35.3CFM Corrosion Resistant Two Stage Vacuum Pump BVV™ Pro Series 35.3CFM Corrosion Resistant Two Stage Vacuum Pump

    Pro Series 35.3CFM Corrosion Resistant Two Stage Vacuum Pump

    Pro Series  35.3CFM Corrosion Resistant Two Stage Vacuum Pump   This is the BVV™ Brand 35.3CFM Two Stage Pro Series vacuum pump. The BVV™ Pro Series 35.3CFM will pull a vacuum down to 0.5 micron effortlessly. The pump is designed with corrosion resistance and long term continuous operation in mind. Comes standard with KF40 fittings, clamps, centering rings and oil mist exhaust filter which returns trapped oil back to the pump and allows for quieter operation. Adjustable gas ballast keeps moisture, solvent, and other contaminants from getting stuck in the pump.   Compare to Cacejen or Xeno brand rotary vane vacuum pumps. Please Refer to these charts for vacuum specifications at altitude and conversions: Vacuum at Altitude Chart   Vacuum Conversion Chart   Specifications Electrical Requirements: 220VAC - Note this pump does not come with a plug and must be wired manually. Pumping Rate: 35.3CFM Ultimate vacuum without gas ballast: 0.5 micron Inlet/Outlet connection: KF40/NW40 Flange Oil Volume: 4.5L/4.76 quarts Working Temperature: 5C to 40C Unit Weight: 68KG / 150lbs Recommended oil: Ultragrade 19 CE Compliance: yes Warranty 2 year limited warranty   Pump Warranty Information: Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™) If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void. These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties. When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.) To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.

    Read more

    $6,663.04

  • Julabo CORIO CD-BC6 Heating Circulator - New Julabo CORIO CD-BC6 Heating Circulator - New

    View options

    Julabo Julabo CORIO CD-BC6 Heating Circulator - New In Stock

    Julabo CORIO CD-BC6 Heating Circulator The new generation of laboratory circulators for routine work and standard tasks CORIO™ heating circulators feature professional technology for high standards. These units facilitate internal temperature control in the bath tank or control of externally connected applications. Your advantages Models for internal and external applications Bright, white, easy to read display Very quiet Easy pump change-over between internal and external circulation USB connection High-quality bath tanks made of stainless steel with bath lid and drain tap Integrated cooling coil for counter-cooling Technical Data Order No. 9012506 Model series CORIO Category Heating Circulators Working temperature range (°C) +20 ... +150 Temperature stability (°C) ±0.03 Setting / display resolution 0.01 – 0.1 °C Temperature Display LED Heating capacity (kW) 1 Pump capacity flow rate (l/min) 15 Pump capacity flow pressure (psi) 5.08 Bath opening/bath depth (W x L / D inch) 5.1 x 5.9 / 7.8 Pump connections M16x1 Barbed fittings diameter (inner dia. / mm) 8 / 12 Filling volume (litres) 4.5 ... 6 Ambient temperature 5...40 °C Dimensions W x L x H (inch) 9.5 x 17.4 x 18.5 Weight (LBS) 22.1 Included with each unit 2 each barbed fitting for tubing 8 and 12 mm inner dia.(pump connections M16x1 male) Cooling Coil integrated Bath tank Stainless steel Bath cover integrated

    Read more

    $6,803.25

    View options

  • BVV™ Extraction RACK #7

    View options

    Extraction RACK #7

    Extraction RACK # 7 Rack 7 has 4.5" thick vertical support bars and 3x horizontal bars to complete our strongest standard extraction rack. This rack includes 4x locking caster wheels that can also be adjusted to be level on uneven surfaces. For ease of mounting equipment, we recommend our pipe hangers with hang on brackets   Rack Dimensions (L x W x H) 30" x 39" x 60" (Assembled units come with a 30-day warranty) Note: The unit does not come assembled - select "pre-assembled" from the drop-down menu to have the unit assembled by BVV before shipping Pipe hangers are not included There is no warranty on unassembled units   Shipping Notice: If the customer orders the rack as assembled, then the item will only ship via freight and there will be additional shipping charges.

    Read more

    $2,290.42 - $2,498.64

    View options

  • Pump Part - MVP - Liquid - Check Valve Kit

    $313.72

  • Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - CO2 Regulator

    Master Vapor Pumps Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - CO2 Regulator

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - CO2 Regulator All sales final

    Read more

    $610.78

  • Pump Part - MVP - 60 PSI & Liquid - Shaft Assembly Kit

    Master Vapor Pumps Pump Part - MVP - 60 PSI & Liquid - Shaft Assembly Kit

    Pump Part - MVP - 60 PSI & Liquid - Shaft Assembly Kit All sales final

    Read more

    $1,943.39

  • BVV Bead Bath BVV Bead Bath

    View options

    BVV Bead Bath

    BVV Bead Bath   Introducing the BVV's Bead Bath - A cost-effective Bead Bath for Precise and Contamination-Free Laboratory needs. The Bead Bath is a cost-effective bead bath that allows for precise temperature application to warm your extracts, distillates, and isolates faster than a traditional hot plate eliminating water contamination. Unlike traditional water baths, bead baths replace water with reusable metallic beads, eliminating the risk of experimental contamination and ensuring accurate results. With the Bead Bath, you can say goodbye to high electricity consumption and frequent cleanup. The bead bath's efficient design minimizes power usage, as the beads do not evaporate, and require less maintenance, saving you time and resources. Experience rapid start-up times and uniform heating with the Bead Bath's surround heating feature. This cutting-edge technology guarantees even temperature distribution, preventing hotspots and ensuring consistent and reliable outcomes for your samples. Safety is our top priority, and the Bead Bath is no exception. Equipped with over-temperature protection, this bead bath maintains safe and stable conditions for your valuable samples throughout the entire experiment. Discover the benefits of the BVV Bead bath and revolutionize your laboratory work with contamination-free, precise, and efficient temperature control. Join researchers and professionals worldwide in experiencing the power of the #1 bead bath ranked on Google. Upgrade your experiments with the BVV's Bead Bath. Bath internal dimensions: 2 quart: 6.75” Tall X 4.75” Diameter 1.5 Gallon: 8-5/8" Tall x 7-1/8" Diameter 3 Gallon: 9" Tall x 10" Diameter 7 Gallon: 8" Tall x 16" Diameter Does not include Beads If the option is selected to include aluminum beads, the quantities will be: 2 quart: 2 liters 1.5 Gallon: 4 liters 3 Gallon: 9 liters 7 Gallon: 18 liters

    Read more

    $180.46 - $2,880.38

    View options

  • 500mL Single Neck RBF, 24/40 Outer Joint

    Chemglass 500mL Single Neck RBF, 24/40 Outer Joint

    500mL Single Neck RBF, 24/40 Outer Joint Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. 

    Read more

    $81.90

  • Sale -27% Neocision Spectra Elite LED Grow Light - DLC Listed Neocision Spectra Elite LED Grow Light - DLC Listed

    Neocision Spectra Elite LED Grow Light - DLC Listed

    Neocision Spectra Elite LED Grow Light ELITE Neocision Spectra Elite fixtures feature 20.6% blue spectra and 45.1% red spectra witha peak at 660nm for your flowering plants. This unique spectra mix creates stronger plants for nutrient uptake with maximized red for increased photosynthesis. Get increased yields, quality bud formation and high rates of cannabinoid production levels. Neocision Specta Elite Cutsheet DLC Qualified Product List Performance, Specs and Ranking  FEATURES: Efficacy up to 2.85 Micromoles / J Industry Leading Horticulture LEDs RJ Port for Plug and Play Control Systems Folding Design for Fast and Easy Installation Leading 660nm LED Count – 150 660nm diodes Per Fixture 7 Year Limited Warranty on Fixture 8 Year Limited Warranty on Driver Looking for bulk purchases? We offer volume discounts and other value-adding services with our partners at RSX Enterprises. Call (331-281-0154) and speak with a rep for more information.    SPECTRUM AND EFFICACY PPF Efficacy: 2.85 at 240 VAC Photon Flux (µmol/s) (400-700nm): 1939 Photon Flux Blue (µmol/s) (400-500nm): 400 Photon Flux Green (µmol/s) (500-600nm): 666 Photon Flux Red (µmol/s) (600-700nm): 874 Total Blue/Red - Energy Bands: 1274 % Blue: 20.64% % Green: 34.34% % Red: 45.06% POWER Power Consumption: 680W AC Driver: Sosen Power Factor: >0.95 Surge Protection: 6 KV 208V: 3.44A 240V: 2.98A 277V3: 2.58A DIMENSIONS Fixture Size (driver mounted on the fixture): (L) 43.9” x (W) 43.9” x (H) 4.1” Fixture Size (without driver): (L) 43.9” x (W) 43.9” x (H) 1.6” Power Supply Dimension: (L)23” X (W) 6.5” X (H) 3” Driver Net Weight: 10.1 lb. Fixture Net Weight: 20.4 lb. OTHER Mounting Height >6” above canopy Beam Angle 120 Degree Input Voltage 200 - 277 VAC Manual Dimming Knob Yes Built In Control Ports Yes Power Cord Length (Extensions available) AWG 18, 6 Foot Standard Plug 240 VAC - NEMA 6-15P Substitute Plugs (Upon request at order) 277 VAC, Pigtails Adjustable Height Hanging Kit Included Yes Fixture Warranty 7 Years Limited Driver Warranty 8 Years Limited ETL Safety Certified Conforms to UL 1598:2018 Ed.4Certified to CSA C22.2#250.0:2018 Ed.4*ETL Safety Certified No. 5020070 DLC Listed Yes

    Read more

    $763.47 $555.25

  • Sale -56% 10L Neocision ETL Lab Certified Rotary Evaporator

    10L Neocision ETL Lab Certified Rotary Evaporator

    10L Neocision ETL Lab Certified Rotary Evaporator The 10L Neocision ETL Lab Certified Rotary Evaporator is a full-scale system meant to fulfill the needs of large volume production and meet the requirements of a certified laboratory with its ETL certification standards. Featuring an electric lift bath and all PTFE valves for extreme chemical resistance, the 10L Neocision gives users the ability to recover large amounts of solvent in a smaller footprint with highly improved functionality. All Neocision rotovaps feature high-efficiency valves and drain ports making it easy to directly inject solution continuously without the need to stop the system or release vacuum to drain. The temperature and rotation speed are easily controlled from a single digital interface. Our rotovaps are a fraction of the price of more costly systems with the same functionality and evaporation efficiency. To keep your bath heating properly, this unit should only be used with RO or DI water. 10-50L NEO and ECO Rotary Evaporator Diagram Features: ETL Certified for Lab use. Digital temperature and speed control with simple user interface Electric Bath Lift Teflon Coated Bath for corrosion resistance High-efficiency drain port and injection valves Smaller footprint for improved workspace allocation Mobility with locking casters Shorter vapor path for faster evaporation and condensation Direct injection capability for continuous feeding of solution Continuous draining capability without the need to release vacuum or stop the system 1-year warranty on all mechanical parts. Does not include glassware. Specifications: Model 10L Solvent Pro Series Rotary Evaporator Optimum Ambient Temperature 5~25C / 41~105.8F Glass Material GG-17 High Borosilicate Power (V/Hz) 220-240V 60Hz Single Phase Speed Regulation Digital Step-less Regulation Rotation Speed 20-130 RPM Set Temperature RT+5-99C Temperature Control Digital Temperature Control Maximum Vacuum Pressure -29.8 inHg Evaporating Flask Capacity 10L (10000ml) Receiving Flask Capacity 10L (10000ml) Condenser Style Main + Auxiliary Vertical Double Helix Heater Max Current Draw (Amps) 25 Water Bath Material 304 Stainless Steel Water Bath Size 17.7 x 9.8 in. Lifting Function Electric Lifting Stroke 190mm / 7.5 in. Total Power Consumption (kW) 3300w Dimensions 81 x 44 x 20 in. Weight 155 lbs Vacuum Connection 14mm / .55 in. Barb Condenser Connection 18mm / .70 in. Barb Warranty 90 days excluding glass parts Certifications ETL   Rotovap Quick Start Guide This guide gives basic quick start instructions for rotovaps. It is intended to provide a starting point for learning the process. Parameters should be adjusted to suit specific needs.  Clean and assemble unit. Make sure all pieces are cleaned and sterilized using an alcohol solution. Connect chiller to condenser and set to 0C (32F). Always fill a rotovap condenser from the top down (chiller output to top of condenser, chiller input to bottom of condenser). Connect vacuum pump to cold trap and connect cold trap to vacuum port on rotovap. Turn on heat bath and set to 40C (113F). Once heat bath, chiller and cold trap have reached desired temperatures, turn on rotovap motor and set speed to approximately 100 RPM (does not have to be precise). Keep in mind, higher RPM’s will increase evaporation power but also increase heat load. Start vacuum pump and allow vacuum to pull down for a few minutes before injection. Once vacuum has been pulled to a sufficient level (does not have to be precise but should be below 100 Torr), using the injection valve, very slowly inject approximately 500 mL of solution into evaporating flask and then close the valve. Allow this small amount to begin evaporating. You may see the chiller begin to rise in temperature, this is called “priming” the rotovap. Once the temperature stops rising or all liquid is almost completely evaporated, open the injection valve again very slowly so that a small amount of liquid begins to enter the evaporating flask. Do not close injection valve this time but continue to allow solution to enter the evaporating flask. At this point you must try to match the input speed to the output speed. What this means is that you should be injecting the same amount of liquid into the rotovap that is equal to the amount of liquid dripping from the condenser into the receiving flask. You will know that the input speed and output speed are matched because the chiller will remain at a stable temperature. If the chiller begins to rise, then you are injecting too much liquid. Dial back the valve until the chiller stabilizes. Once everything is stabilized, you may walk away from the rotovap if necessary. Check every so often to make sure temperatures remain stable and evaporation continues efficiently. ***Note: All units are inspected for broken glass or parts before unit is shipped. If unit arrives damaged or glass is broken (this does not include minor imperfections or scuffs in glassware), Customer MUST contact BVV™ within 3 days of delivery to file a claim and receive a replacement part. If customer DOES NOT contact BVV™ within 3 days of delivery responsibility for replacement parts falls on the customer and they must pay for replacement pieces.*** ***Note: This item will ship by freight only.*** ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.***

    Read more

    $6,246.60 $2,776.27

  • Sale -50% ULVAC DA-40S 1.6 Cfm Oil-Free Diaphragm Pump ULVAC DA-40S 1.6 Cfm Oil-Free Diaphragm Pump

    ULVAC ULVAC DA-40S 1.6 Cfm Oil-Free Diaphragm Pump - New In Stock

    ULVAC DA-40S 1.6 Cfm Oil-Free Diaphragm Pump (Please note: This item has a minimum 6 week Lead Time)        This Diaphragm Dry type pump creates vacuum by reciprocate movement of rubber diaphragms. The structure of this pump makes Oil-free environment and maintenance easy.  Different pumping speed and two/single stages are optional depending on your required pressure and pumping volume. Applications: Vacuum chucks, wafer and tip handling devices. Vacuum tweezers, medical appliances. Printing equipment. Automatic packing machines. Optical appliances.   Specifications Unit 50Hz - 60Hz Actual Pumping Speed L/min 40 - 46 Ultimate pressure Pa 19.9 x 10^3 Motor Single phase, 100V, 60W, 4P, Capacitor run Full load current A 1.6 Weight kg 7.2 Inlet, outlet pipe diameter mm O.D. dia.9 × I.D. dia.5 (Rc 1/4) Ambient temperature °C 7 – 40 Overall dimensions mm 128(W) × 242(L) × 178(H)

    Read more

    $1,526.95 $763.47

  • KF-40 Stainless Steel Ball Valve (Nitrogen Tested) KF-40 Stainless Steel Ball Valve (Nitrogen Tested)

    KF-40 Stainless Steel Ball Valve (Nitrogen Tested)

    KF-40 (NW40) Stainless Steel Ball Valve This ball valve has a KF40 (NW40) High Vacuum Flange to adapt to any other KF40 pump or manifold if needed and is made out of 304 stainless steel with a PTFE seat and seals. BVV™ Tri Clamp Ball Valve - Data Sheet

    Read more

    $166.58

  • Beaker and Wrench KF25 Clamp and Gasket Set

    View options

    Beaker & Wrench Beaker and Wrench KF25 Clamp and Gasket Set

    Beaker and Wrench KF25 Clamp and Gasket Set This FK25 Clamp and gasket set is specifically designed to attach a glass KF25 flange to a steel or PTFE flange. The gasket materials are PTFE and Viton.

    Read more

    $159.64

    View options

  • Welch ChemStar 1400N 0.9 cfm 0.1 Micron Belt Drive 2-Stage Pump

    View options

    Welch Vacuum - Gardner Denver Welch ChemStar 1400N 0.9 cfm 0.1 Micron Belt Drive 2-Stage Pump

    Welch ChemStar 1400N 0.9 cfm 0.1 Micron Belt Drive 2-Stage Pump ***Note: This item has a possible 1-2 week lead time depending on stock availability.***  Product Details Low rotation speed for longer service life Vital parts corrosion resistant Large oil reservoir dilutes contaminants ChemStar belt-driven Vacuum Pump is designed to tolerate harsh chemical contamination. Vital pump parts are corrosion resistant. The large oil reservoir with PTFE surfaces dilutes contamination and the low pump rotational speed lessens friction to reduce operating temperature and chemical effects. PTFE surfaces, fluorcarbon gaskets and seals, Nitrogen purge to cool and degas oil. ChemStar system comes with Gold Oil, a synthetic lubricant designed to minimize effects of chemical contaminants.   Specifications Model Number 1400N Application Vacuum Manifolds, (Schlenk Lines), High boiling point evaporations (to 195 deg. C), General laboratory. HCl, O3, H2SO4*HBr, HOAC, SOx*Br2, F3CCO2H, H2S*Cl2, CH2O, HNO3*SF6, CF4 Fragments and other gases; Type Belt-Drive Vacuum Pump, chemical resistant Free Air Displacement cfm (l/min.) @60Hz 0.9(25) Ultimate Pressure 1 x10-4(0.00013) Pump RPM 580 Oil Capacity 0.62(0.59) Motor Horsepower (watts) 1/3(250) Adjustable Vac. / Gas Ballast Yes Tubing Needed 7/16(11) ISO Exhaust / Intake Flange NW 16 Overall Dimensions LxWxH in. (cm) 17.8x9x12.6 (45.2x22.9x32) Ship Weight 71(32.3) Shipping Carton Dimensions LxWxH in. (cm) 20.5x13.8x14.5 (52.1x35.1x36.8)

    Read more

    $4,754.36 - $6,038.38

    View options

  • SCILOGEX SCI380HS-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plate, 110V, 50/60Hz US Plug SCILOGEX SCI380HS-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plate, 110V, 50/60Hz US Plug

    View options

    Scilogex SCILOGEX SCI380HS-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plate, 110V, 50/60Hz US Plug

    SCILOGEX SCI380HS-Pro 5.5 x 5.5 in. LCD Digital Magnetic Hotplate Stirrer 380ºC/1500rpm Max Product Description The new SCI380HS-Pro hotplate-stirrer is a very economically priced LCD digital hotplate-stirrer ideal for temperatures below 380°C. This compact unit can be used as a hotplate, stirrer or combination. SCILOGEX 380°C magnetic hotplate stirrers include all leading safety standards and is chemically resistant with white ceramic work plate. They can be used in physical, chemical, analytical and biological laboratories. Product Features Heat only, stir only or heat and stir together functions. Digital temperature control with max. temperature at 380°C Digital speed control with max. speed up to 1500rpm High resolution LCD displays actual temperature and speed. Brushless DC motor is maintenance free. Ceramic plate for chemical resistance and easy clean Aluminum cover with ceramic work plate, allows for immediate heat transfer. Electronic speed control for constant speed even during changes in load External temperature control is possible with temperature sensor PT1000. Hot warning sign if temperature is above 50°C. Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar. Max. stirring quantity of H2O at 5L. cTUVus approved for UL and CSA 2 Year Warranty Work plate dimension 140x140mm Work plate material Aluminum cover with ceramic coating Motor type Brushless DC motor Motor input power 2.4W Motor output power 1.8W Power 510W Heating output 500W Voltage 100-120V 60Hz Stirring positions 1 Max. stirring quantity 5L Max. magnetic bar[length] 50mm Speed range 20-1500rpm Speed display LCD Temperature display LCD Heating temperature range Room Temp.+5°C. - 380°C Overheat protection 420°C Temperature control accuracy ±1°C External temperature sensor PT1000 (accuracy ±0.5°C) Control accuracy of sensor ±20rpm Protection class IP21 Dimension[WxDxH] 320x180×108mm Weight 2.2kg Permissible ambient temperature and humidity 5-40°C, 80%RH   Additional Resources and Information Downloadable PDFs SCI380HS Hotplate& Stirrer manual Hotplates & Stirrers Brochure Hotplate & Stirrers Accessories    

    Read more

    $594.12 - $669.08

    View options

  • SCILOGEX D500 Homogenizer, 100-5000ml capacity SCILOGEX D500 Homogenizer, 100-5000ml capacity

    View options

    Scilogex SCILOGEX D500 Homogenizer, 100-5000ml capacity

    SCILOGEX D500 Homogenizer, 100-5000ml capacity SCILOGEX D500 Homogenizer Package - Drive Motor, DS-500/2 20mm diaGenerator, with S20F/ER20 flat head-open slot fine generator, 215mm immerse length, for water in oil or oil in water emulsions, volumes 10- 5000ml and with H-600 stand 110V, 60Hz CILOGEX D500 Homogenizer Package - Drive Motor, DS-500/1 20mm dia. Generator, with S20C/SR20 flat head-open slot coarse generator, 215mm immerse length, for solid/liquid media, volumes 10-5000ml and with H-600 stand, 110V, 60Hz Scilogex D500 Homogenizer Drive Motor, 110V/60Hz, US Plug Motor only

    Read more

    $1,571.37 - $2,863.72

    View options

  • Sleeved Recovery Tank Sleeved Recovery Tank

    View options

    Sleeved Recovery Tank

      Sleeved Recovery Tank Built for optimized recovery performance and efficient use of dry ice, these sleeved recovery spools are the perfect prechilling and recovery solutions for hydrocarbon extraction. Available in 5LB,10LB, & 22LB butane capacities these sleeved recovery tanks are a great upgrade for any of our 1-5lb extractors. All models of our Sleeved Recovery tank come complete with a 1/2" JIC recovery port, a 1/4" JIC drain port, 2X 1/4" JIC accessories ports, 2X Borosilicate sight glasses, a single -30hg-250PSI Compound Pressure Gauge, and a 125 PSI ASME pressure relief valve to provide maximum compatibility and versatility across processing platforms. Specifications 6"x12", 6"x24", 12"x12" Sleeved spool  Hemi ring stand with 1/4" JIC drain valve 2X Borosilicate Sight Glasses 1X 125 PSI ASME pressure relief valve 1X -30hg-250PSI Compound Pressure Gauges 1X 1/2" JIC Recovery Valve 2X 1/4" JIC Accessory Valves 1X JIC Drain Valve Maximum Pressure Rating: 125PSI

    Read more

    $1,624.12 - $2,776.27

    View options

  • ASME 150L - 350 MAX working pressure, Pneumatic PSIG 385 ASME 150L - 350 MAX working pressure, Pneumatic PSIG 385

    View options

    ASME 150L - 350 MAX working pressure, Pneumatic PSIG 385

    ASME 150L - 350 MAX working pressure, Pneumatic PSIG 385   This is a custom manufactured made ASME Certified 150L Jacketed Solvent Tank with ASME Stamp and made out of 304 Stainless Steel. This base is designed to be configured to any application and can even be used as a solvent tank. This tank comes bare with no fittings and will hold 150LBS of liquid butane and is able to have fluid circulated around the outer jacket to increase recovery speeds in the extraction system.  This unit also has welded lift points on the top of the tank. Specifications Material 304 Stainless Steel Certification: ASME MAWP @ 100°C / 212°F: Inside 350 PSI / 2.42 MPa Jacket 150 PSI / 1.1 MPa MDMT -40°C / -40°F MIN TEMP -20°F at 350PSI Butane Capacity 150LBS Connection Sizes: (3) 6" Tri-Clamp (2) 1.5" Tri-Clamp (2) 1/2" FNPT Weight 108LBS Outer Dimensions: 44.5" Tall 32.5" W x 32.5" L       **This Item will ship Via FREIGHT ONLY.

    Read more

    $12,493.21

    View options

  • Sale -40% Sanitary 3-Way Ball Valve 4" Tri-Clamp Sanitary 3-Way Ball Valve 4" Tri-Clamp

    Sanitary 3-Way Ball Valve 4" Tri-Clamp

    Sanitary 3-Way Ball Valve These 3 way ball valves are typically used to drain a system that needs to be routed to multiple different places. The internal ball is an L shape meaning that the middle port should be used as the in and it can be routed to the left or right port. The valve can also be closed off so that the liquid will not move any direction. It can be easily attached to any system using Tri-Clamp flanges. Housing Material: 304 SS Seat Material: PTFE Temperature Range: 0-100°C

    Read more

    $347.03 $208.22

  • Master Vapor MVP-150XL Diaphragm

    Master Vapor Pumps Master Vapor MVP-150XL Diaphragm

    Master Vapor MVP-150XL Diaphragm Diaphragm replacement kit for use with the MVP-150XL recovery pump. Unit of Measure: EA Height: 2 IN   |  5.08 CM Length: 12 IN   |  30.48 CM Width: 12 IN   |  30.48 CM Volume: .167 FT3   |  .005 M3 Chargeable Weight: 2.58 LBS  | 1.17 KG

    Read more

    $569.14

  • Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - Fill/Vent Fitting Kit

    Master Vapor Pumps Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - Fill/Vent Fitting Kit

    Pump Part - MVP - 60 PSI, 150 PSI, Liquid, XL150 - Fill/Vent Fitting Kit All sales final     

    Read more

    $208.22

  • 6′ Fisher American Fume Hood 6′ Fisher American Fume Hood

    View options

    Fisher American 6′ Fisher American Fume Hood

     6′ Fisher American Fume Hood       sku Fume Hood Exterior Dimensions: Work Area (Interior) Dimensions: Fume Hood Accessories: Width: Depth: Height: Width: Depth: Height: NLS-601 72” 31″ 54″ without cabinets 89″ overall with cabinets 62″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 General Storage Cabinets NLS- 604 72” 31″ 54″ without cabinets 89″ overall with cabinets 62″ 23″ 46″ Light on/off Switch2 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 ACID Storage 1 Flammable Storage NLS- 606 72” 31″ 54″ without cabinets 89″ overall with cabinets 62″ 23″ 46″ 1 - Light on/off Switch 1 - AC Power Plug 1 - Cold Water Valve 1 - Gas Valve 1 - Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 - Flammable Storage NLS- 607 72″ 48″ 89″ 62.5″ 39.5″ 81″ Door opening: 62.5″ 1-Light on/off Switch 1 - LED Light 1 - AC Power Plug 1 - Gas Valve 1 - Coldwater valve 4 - Sliding doors NLS- 608 72″ 31″ 89″ 62.5″ 23.5″ 81″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 4 Vertical Sliding doors. NLS- 609 72” 31″ 54″ without cabinets & 89″ with cabinets 62″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 General Storage NLS- 610 72” 31″ 54″ without cabinets & 89″ with cabinets 62″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 ACID Storage 1 General Storage NLS- 611 72” 31″ 54″ with out cabinets 89″ over all with cabinets 62″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 ACID Storage NLS- 612 72” 31″ 54″ with out cabinets 89″ over all with cabinets 62″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 Acid Storage 1 Flammable Storage NLS- 613 72” 31″ 54″ with out cabinets 89″ over all with cabinets 62″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows NLS- 614 72” 31″ 54″ with out cabinets 89″ over all with cabinets 62″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 General Storage 1 Flammable Storage NLS- 615 72” 31″ 54″ with out cabinets 89″ over all with cabinets 62″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 General Storage 1 Flammable Storage NLS- 616 72” 31″ 54″ with out cabinets 89″ over all with cabinets 62″ 46″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 General Storage 1 ACID Storage NLS- 617 72” 31″ 54″ with out cabinets 89″ over all with cabinets 62″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 ACID Storage NLS-630 72” 49″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 General Storage Cabinets NLS-631 72” 48″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 General Storage Cabinet 1 ACID Storage Cabinet NLS-632 72” 48″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 ACID Storage NLS-633 72” 48″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 Acid Storage 1 Flammable Storage NLS-634 72” 48″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ 1 - Light on/off Switch 1 - AC Power Plug 1 - Cold Water Valve 1 - Gas Valve 1 - Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 - Flammable Storage NLS-635 72” 48″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 General Storage 1 Flammable Storage NLS-636 72” 49″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 Blue General Storage Cabinets NLS-637 72” 48″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 General Storage Cabinet 1 ACID Storage Cabinet NLS-638 72” 48″ 54″ without cabinets & 89″ with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 ACID Storage NLS-639 72” 49″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 Acid Storage 1 Flammable Storage NLS-640 72” 48″ 54″ without cabinets, 89″ with cabinets 62″ 39″ 46″ 1 - Light on/off Switch 1 - AC Power Plug 1 - Cold Water Valve 1 - Gas Valve 1 - Vertical Sliding Sash Door with 4 horizontal sliding glass windows 2 -Flammable Storage NLS-641 72” 48″ 54″ without cabinets 89″ overall with cabinets 62″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve1 Vertical Sliding Sash Door with 4 horizontal sliding glass windows 1 General Storage 1 Flammable Storage

    Read more

    $14,193.67 - $24,604.68

    View options

  • SSP - Union Elbow - 3/8" Duolok SSP - Union Elbow - 3/8" Duolok

    SSP Corporation SSP - Union Elbow - 3/8" Duolok

    Stainless Steel SSP -Union Elbow 3/8" Duolok

    Read more

    $63.85

  • Fisher American 8′ Wide x 4′ Deep Walk-In Fume Hood Fisher American 8′ Wide x 4′ Deep Walk-In Fume Hood

    View options

    Fisher American Fisher American 8′ Wide x 4′ Deep Walk-In Fume Hood

     Fisher American 8′ Wide x 4′ Deep Walk-In Fume Hood    (Please Note:  2 weeks Lead Time)   Description 8′ x  48″ deep ”Walk-In” Fisher American Chemical Laboratory Fume Hood  (NLS-H511)     Unit does Not include blower  Add Blower, The blower is ¾ HP Hazardous Location blower C1D1    Fume Hood Exterior Dimensions: Width: 96″ Depth: 48″ Height: 89″   Work Area (Interior) Dimensions: Width: 86.5″ Depth: 39.5″ Height: 81″ Door Opening: 86.5″   Fume Hood Accessories: 1- Light on/off Switch 1 – LED Light 1 – AC Power Plug 1 – Gas Valve 1 – Cold water valve 4 – Sliding doors    *Polyply Composites U.L. Listed ChemBlok CR-900 laminates are glass reinforced, UV inhibited composites sheet that offer excellent Chemical and flame resistance wherever a cost effective general-purpose corrosion material is required.    Typical Properties General Information ASTM Polyply Composites CR-900 U.L Recognition File Number E31703 Meets U.L. Standards 1805 Color (Standards) White Sheet Size 48'' x 96'' length Sheet Thinkness 3/16'' Other Sizes upon Request Specific Gravity 1.8 D-792 Water Absorption (%by weight) 0.093 D-792 Flame Spread 20.2 UL 723/E-84 Smoke Generation, Tunnel Test 166 E-84 Flame Resistance Self Extinguishing Tensile Strength, psi 8,300 D-638 Flexural Strength,psi 20,400 D-790 Compressive Strength 29,200 D-695 IZOD Impact Strength 8.1 D-256 Barcol 50       REAGENT RESISTANCE - PANEL CR900 LOT 07-1087,88 No. Reagent Rating No. Reagent Rating 1 Amyl Acetate 0 26 Iodine, Tincture 2 2 Ethyl Acetate 0 27 Methyl Ethyl Ketone 1 3 Acetic Acid 98% 1 28 Methylene Chloride 2 4 Acetone 1 29 Mono Chlorobenzene 0 5 Acid Dichromate 5% 2 30 Naphthalene 0 6 Butyl Alcohol 0 31 Nitric Acid 20% 0 7 Ethyl Alcohol 0 32 Nitric Acid 30% 0 8 Methyl Alcohol 0 33 Nitric Acid 70% 2 9 Ammonium Hydroxide 28% 0 34 Phenol 90% 0 10 Benzene 1 35 Phosphoric Acid 85% 0 11 Carbon Tetrachloride 1 36 Silver Nitrate Saturated 0 12 Chloroform 1 37 Sodium Hydroxide 10% 0 13 Chromic Acid 60% 2 38 Sodium Hydroxide 30% 0 14 Cresol 1 39 Sodium Hydroxide 40% 0 15 Dichloroacetic Acid 1 40 Sodium Hydroxide, Flake 0 16 Dimethyl Formamide 1 41 Sodium Sulfide, Saturated 0 17 1,4-Dioxane 0 42 Sulfuric Acid 33% 0 18 Ethyl Ether 0 43 Sulfuric Acid 77% 1 19 Formaldehyde 37% 0 44 Sulfuric Acid 96% 3 20 Formic Acid 90% 1 45 Sulfuric Acid 77% + Nitric Acid 70% (50/50) 2 21 Furfural 2 46 Toluene 0 22 Gasoline 0 47 Trichloroethylene 0 23 Hydrochloric Acid 37% 0 48 Xylenes 0 24 Hydrochloric Acid 48% 3 49 Zinc Chloride, Saturated   0 25 Hydrogen Peroxide 3% 0       Unless otherwise indicated, all properties are based on tests performed on standard ASTM Test Samples and according to ASTM test methods  Values Shown are for test Samples Made from production materials and are believed to be typical. No warranty is expressed or implied.

    Read more

    $29,046.71 - $35,168.38

    View options

  • Sale -25% Reducer/Adapter Reducer/Adapter

    View options

    SSP Corporation Reducer/Adapter

    SSP Reducer/Adapter SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance, and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations. Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Connection Type 2 Tube Stub Connection Size 2 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA! Dimensions A 1.54 in C 0.70 in D 0.60 in E 0.11 in G 9/16 in H 1/2 in T 1/4 in B 1.25 in Tx 1/4 in

    Read more

    $10.41 - $12.49

    View options

  • Sale -58% Female Run Tee Female Run Tee

    View options

    SSP Corporation Female Run Tee

    SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations.   Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Connection Type 2 Duolok Tube Fitting Connection Size 2 Specified by User Connection Type 3 Female NPT Connection Size 3 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating NPT Pressure Rating >10,000PSI ASME B31.3     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

    Read more

    $33.32 $13.88

    View options

  • Mastercool Manifold Mastercool Manifold

    Mastercool Mastercool Manifold

     Mastercool Manifold   Mastercool Aluminum R12 Manifold: THE MASTERCOOL MANIFOLD IS USED IN CONJUCTION WITH BOTH OUR ACTIVE UPGRADE KIT AND OUR ICARUS RACK SYSTEMS. WHEN USED IN AN ACTIVE CLOSED LOOP RECOVERY/CIRCULATION KIT, THE MANIFOLD ALLOWS FOR CONTROL OF SOLVENT INPUT VIA EXTRACTOR INPUT ON THE LOW SIDE(BLUE GAUGE), AND RECOVERY TO YOUR SUPPLY TANK ON THE HIGH SIDE (RED GAUGE). WHEN USED WITH ONE OF OUR ICARUS RACK SYSTEMS, THE MIDDLE PORT IS CONNECTED TO A SEPERATE NITROGEN SUPPLY TANK, AND THE HIGH AND LOW SIDES ARE CONNECTED TO THE MATERIAL COLUMN AND DEWAXER TO PROVIDE PASSIVE PRESSURE ASSISTANCE FOR MOVING SOLVENT THROUGH THE SYSTEM. Mastercool is the leading manufacturer of professional quality A/C manifold gauge sets. Our manifold gauge sets are. Constructed of the finest materials and machined with precision to the highest quality standards. At Mastercool, everymanifold we build is built to last. All Mastercool gauges are color coordinated for easy refrigerant recognition. Our free floating piston valve results in less wear and tear in comparison to market standard twisting piston valves Double O-Ring allows for a much better seal resulting in less leaks SPECIFICATIONS: Aluminum Block ¼ SAE Brass Fittings 1.6 Gauge Class 80 mm Gauges Refrigerants: R1270, R290, R600a Bar, PSI, ˚C Temp. Ratings: 100˚C Pressure Ratings: High Side 800 PSI, Low Side 500 PSI Temp.: Different for each Refrigerant

    Read more

    $104.11

  • BVV Compression 12" Tri-Clamp x (3) 2" Tri-Clamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid BVV Compression 12" Tri-Clamp x (3) 2" Tri-Clamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid

    BVV Compression 12" Tri-Clamp x (3) 2" Tri-Clamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid

    BVV Compression 12" Tri-Clamp x (3) 2" Tri-Clamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid This End Cap comes with (4) Compression connections and (3) 2" Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid. They allow the user to adapt and connect a tube stub connection to the (1) 1/4", (2) 3/8", and (1) 1/2" port on a Tri-Clamp lid and the Tri-Clamp Connections. These 7 connections are welded on a 12" Hemispherical Tri-Clamp End Cap.   Specifications Material: 304 Stainless Steel Connection Types: (3) 2" Tri-Clamp with 3" Tube Extension Below Lid on Center Tri-Clamp Port 12" Tri-Clamp (1)1/4", (2) 3/8" and (1)1/2" Female Compression Connections Standard: 3A

    Read more

    $444.20

  • SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, 110V, 50/60Hz US Plug SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, 110V, 50/60Hz US Plug

    View options

    Scilogex SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, 110V, 50/60Hz US Plug

    SCILOGEX SCI550-Pro 7x7 LCD Digital Hotplate Stirrer 550ºC/1500rpm Max Product Description The SCI550-Pro is one of the most technically advanced hotplate-stirrers in the marketplace. With independent back-lit LCD displays for both heat and stirring functions and PID technology. The SCI550-Pro controls temperature at +/- 1ºC. It also incorporates a DC brushless (spark free) motor for extremely long life and excellent performance. It is widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals etc. Combining with glass ceramic work plate, brushless DC motor and external temperature sensor, the work plate temperature is optimized up to 550°C. Product Features Easy-to-read independent back-lit LCD displays for heat and stirring. Digital speed controlling, max. speed at 1500rpm Built-in PID controller ensures safe heating of the medium with overheating protection. Heat only, stir only or heat and stir together functions. Max. heating plate temperature 550°C Glass ceramic work plate provides excellent chemical resistant performance and most efficient heat transfer. RS232 for remote control, providing PC control and data transmission. Low temperature stability External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C. Accessory PT-1000 stand available (built in stand mount) Electronic speed control for constant speed even during changes in load Maintenance free DC brushless motor for long life and more stirring power Two rotating knobs enable easy adjustment of speed and temperature. High magnetic adhesion “HOT” warning will flash when the work plate temperature is above 50°C even when the hotplate is turned off. cTUVus approved for UL and CSA 2 YEAR WARRANTY   Work plate dimension[W x D] 184x184mm(7 inch) Work plate material Glass ceramic Motor type Brushless DC motor Motor input power 18W Motor output power 10W Power 1050W Heating output 1000W Voltage 110V, 60Hz Stirring positions 1 Max. stirring quantity[H2O] 20L Max. magnetic bar[length] 80mm Speed range 100-1500rpm, resolution ±1rpm Speed display LCD Temperature display LCD Heating temperature range Room Temp.-550°C, increment 1°C Temperature control accuracy ±1°C(<100°C) ±1%(>100°C) Overheating protection 580°C Overheating protection ±0.1°C External temperature sensor PT1000 (accuracy ±0.2) "Hot" warning 50°C Data connector RS232 Protection class IP21 Dimension[WxDxH] 215x360x112mm Weight 5.3kg Permissible ambient temperature and humidity 5-40°C, 80%R   Additional Resources and Information Downloadable PDFs SCI550-Pro Manual Hotplates & Stirrers Brochure Hotplates & Stirrers Accessories

    Read more

    $1,088.30 - $1,167.42

    View options

  • Scilogex DS-160 Homogenizer Probe Scilogex DS-160 Homogenizer Probe

    View options

    Scilogex Scilogex DS-160 Homogenizer Probe

    Scilogex DS-160 Homogenizer Probe (Probe ONLY - Motor NOT Included) This is the Scilogex DS-160 Homogenizer probe with either a 5mm diameter or 10mm diameter probe and will attach to the D160 drive motor. Each probe is can handle solid/liquid media - please refer to the chart below for additional specifications. Slot Type Specifications: Probe Type Specifications Model # Diameter x Length Media Type Volume DS-160/5 5mm x 50mm immerse length Solid/Liquid 0.1-50ml DS-160/10 10mm x 115mm immerse length Solid/Liquid 1-250ml      

    Read more

    $490.01 - $709.34

    View options

  • 55 Gallon Hash Ice Water Extraction Washing Vessel 55 Gallon Hash Ice Water Extraction Washing Vessel

    55 Gallon Hash Ice Water Extraction Washing Vessel

    BVV's 55 Gallon Ice Water Extraction Washing Vessel Made in USA Designed with durability and ease of use in mind our Ice Water Extraction Washing Vessels are manufactured from 16 gauge 304 stainless steel crafted with seamless welds for a 100% sanitary construction. Our easy drain barrels come complete with  4X 1.5" Triclamp drains mounted as low as possible for effortless draining of its 55-gallon volume capacity. Perfect for medium to large-scale ice water extraction labs this stand-alone vessel pairs nicely with Boldtbags Large Open Top Wash Bags & Boldt bags 44 gallon Lock-top Full Mesh Stackers. Processing Power Material Capacity Per Batch: 20-30LB Water Capacity: 55 Gallons Cycle Time: 60-90 Minutes Daily Extraction Capacity: Up to 60 lb, per 8-hour shift Specifications 23"x36" 55-gallon Stainless Steel Washing Vessel Seamless 304 Stainless Steel Construction 4X 1.5" Tri-clamp ports for draining, filling, temperature sensing, or sight glasses Performance Low-mounted drain ports for complete draining

    Read more

    $2,082.20

  • Kuritech 3/4 ID PVC Reinforced Braided Hose

    View options

    Kuritech 3/4 ID PVC Reinforced Braided Hose

    Kuritech 3/4 ID PVC Reinforced Braided Hose 3/4" Flexible hose that is ideal for heat transfer applications utilizing mixtures of water and propylene glycol. Specifications:  Max Pressure:  150 PSI @  20° Working Temperature:  -4°C - 65°C

    Read more

    $23.60 - $444.20

    View options

  • Welch CRVpro Direct Drive Rotary Vane Vacuum Pump CRVpro4

    View options

    Welch Vacuum - Gardner Denver Welch CRVpro Direct Drive Rotary Vane Vacuum Pump CRVpro4

    Welch CRVpro Direct Drive Rotary Vane Vacuum Pump CRVpro4 ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits:  Runs 10°C cooler than comparable pumps. Slows corrosion.  Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals.  Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts.  The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection.  Suitable applications include freeze drying, degassing, vacuum ovens and concentrators. 3041-01 is wired for North American 115V, 60Hz operation. Includes North American line cord, vacuum inlet hose barb suitable for gum rubber hose from 5/8" to 3/4" ID, and a charge of oil.  3042-01 is wired for North American 230V, 60Hz operation. Includes 230V North American line cord, UK cord, and skuko cord, and a charge of oil.  3046E-01 comes with an explosion proof motor. Conduit wiring installation required. No cord, plug, or switch provided.  Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr.    Specifications  Applications CRVpro4 Free Air Displacement @ 60 Hz, cfm (L/min) 2.8 (78) Free Air Displacement @ 50 Hz, m³/hr (L/min) 4 (67) Ultimate Pressure, torr (mbar) 5x10⁻⁴ (4x10⁻⁴) Noise Level, dBA 50 Motor Speed, RPM, @60Hz, @50Hz 1740 (1450) 1750 (1450) Motor Power, HP (kW) 0.4 (0.5) Oil Capacity, mL 1150 Connection Flanges NW 16 Inlet Hose Connection* 5/8" to 3/4" Weight, lbs (kg) 46.3 (21) Dimensions, LxWxH, in (mm) 18.2x6.1x9.1 (463x157x230)

    Read more

    $4,844.59

    View options

  • Sale -44% Glas-Col 22L Stir Mantle

    Glas-Col Glas-Col 22L Stir Mantle

    Glas-Col 22L Stir Mantle Safely and accurately heat solutions used in various distillations in laboratory and scientific applications Apply heat directly and uniformly to containers, such as round bottom flasks More accurate than hot plates and safer than Bunsen burners Controllers can be purchased individually Accommodates 22L spherical flasks     Specifications & Description Max Flask Size (mL) 22000 Min Stirrer Speed (rpm) 100 Max Stirrer Speed (rpm) 1850 Max temperature (° F) 752 Max temperature (° C) 400 Power (VAC) 115 Power (watts) 1540 Height (in) 14 Diameter (in) 6.875 Outside Diameter (OD) (in) 19 Description Stirring/Heating Mantle, 22L Spherical Flask; 115V

    Read more

    $2,221.01 $1,249.32

  • 300L ASME Single Jacket Solvent Tank 350psi Max - Bare 300L ASME Single Jacket Solvent Tank 350psi Max - Bare

    300L ASME Single Jacket Solvent Tank 350psi Max - Bare

    300L ASME Single Jacket Solvent Tank 350psi Max - Bare This is a custom manufactured made ASME Certified 300L Jacketed Solvent Tank with ASME Stamp and made out of 304 Stainless Steel. This base is designed to be configured to any application and can even be used as a solvent tank. This tank comes bare with no fittings and will hold 300LBS of liquid butane and is able to have fluid circulated around the outer jacket to increase recovery speeds in the extraction system. This unit also has welded lift points on the top of the tank. **This Item will ship Via FREIGHT ONLY. Specifications Material 304 Stainless Steel Certification: ASME MAWP @ 100°C / 212°F: Inside 350 PSI  / 2.42 MPa  Jacket 150 PSI / 1.1 MPa MDMT -40°C / -40°F MIN TEMP -20°F at 350PSI Butane Capacity 300LBS Connection Sizes: (3) 6" Tri-Clamp (2) 2" Tri-Clamp (2) 1/2" FNPT Weight 750LBS Outer Dimensions: 64" Tall 32" W x 32" L  

    Read more

    $15,269.48

  • Master Vapor MVP Liquid Recovery Pump Master Vapor MVP Liquid Recovery Pump

    View options

    Master Vapor Pumps Master Vapor MVP Liquid Recovery Pump

    Master Vapor MVP Liquid Recovery Pump  THE NEW LIQUID Pumps solvent in liquid state Hydrocarbon and ethanol compatible C1D1 and 3rd party Certified Drastically increases evaporation byexpanding surface area andcreating turbulence Electric Driven FDA Food Grade Compliant MADE IN THE USA   Engineering Specifications: Maximum pumping outlet pressure - 70 PSI Center Section CO2 charge range 5 to 80 PSI(10-15psi over inlet pressure recommended) CO2 Inlet Size: 1 /4 in. npt(f) Maximum Pump Speed 135 cpm (cycle per minute) Process Inlet and Outlet Size: 1 in. npt  Electric Motor: Explosion proof for C101 Hazardous areas Motor Specifications: 2HP, 3,600 rpm, 60Hz Size: 18.3” x 15.4” base x 42.3” tall Weight: 173.2 lb  All sales final Technical Data sheet US Metric Maximum Pumping outlet Pressure 70 PSI 0.48 MPa, 4.8 bar Center section CO2 Change range 6 to 80 PSI 0.03-0.55 MPa 0.3-5.5 bar Equipment Withstand Pressure 350 PSI 2.41 MPa, 24.1 bar Maximum CO2 Consumption <0.2 scfh <0.006 cubic meters/hour CO2 inlet size 1/4 in. npt(f) Maximum Pump Speed 135 cpm Process intel and outlet size 1 in. npt Model MVP Liquid, 3 ph, Inverter Rated Power 2 HP 1.5kW Speed 3600 rp, (60 Hz) Gear Ratio 25.85 Voltage 1-phase 208-230/460V Maximum Amperaage Load 5.2 A (230V / 2.6 A (460V) Model MVP Liquid 1PH Power 2 HP 1.5kW Speed 3600 rpm (60 Hz) Gear Ratio 25.85 Maximum Amperaage Load 5.2 A (115V / 10 A (230V) Noise Data Sound Power (measured per ISO-9614-2 88.5 dBa Sound Pressure {Tested 3.28ft (1m) From Equipment} 80.5dBa Materials Process Pressure Section and Reed Valves Stainless Steel Diaphragms Standard: FKM Fluoroelastomer Optional:PTFE Process Vapor Temperature Range FKM: -40 to 275 °F (-40 to 135 C)PTFE: +40 to 220 °F 9+4 to 104 C

    Read more

    $19,017.44 - $19,780.91

    View options

  • Sale -44% ASME Certified 50L Jacketed Solvent Tank 304L - Bare

    ASME Certified 50L Jacketed Solvent Tank 304L - Bare

    ASME Certified 50L Jacketed Solvent Tank 304L - Bare This is a custom manufactured USA made ASME Certified 50LB Jacketed Collection base with UM Stamp and made out of 304L Stainless Steel. This base is designed to be configured to any application and can even be used as a solvent tank. This tank comes bare with no fittings and will hold around 50LBS of liquid butane and is able to have fluid circulated around the outer jacket to increase recovery speeds in the extraction system. **This Item will ship Via FREIGHT ONLY. Specifications Material 304L Stainless Steel Certification: ABILITY ENGINEERING TECHNOLOGY INC. ASME / UM / NB MAWIWP 350 PSI at 150°F MAWEWP N/A MIN TEMP -20°F at 350PSI Butane Capacity ~50LBS Connection Sizes: 6" Tri-Clamp (2) 1" NPT (2) 1/2" NPT - Outer Jacket Ports (2) 3/8" NPT Weight 146LBS Outer Dimensions: 32-7/8" Tall 14" Diameter Inner Dimensions: 24" Tall 12" Diameter

    Read more

    $2,498.64 $1,388.13

  • Sale -29% Eccentric Recovery Pump Shaft Adapter Eccentric Recovery Pump Shaft Adapter

    View options

    Eccentric Recovery Pump Shaft Adapter

    Eccentric Recovery Pump Shaft Adapter     Replacement Eccentric adapters for TRS or BVV recovery pumps. Model numbers shown below- BVV-EC-TRS: TRS21 BVV-EC: BVV2CYL BVV4CYL BVVCMEP-RETRO  

    Read more

    $69.41 - $104.11

    View options

  • Welch Diaphragm Replacement Kit Welch Diaphragm Replacement Kit

    View options

    Welch Vacuum - Gardner Denver Welch Diaphragm Replacement Kit

    Welch Diaphragm Replacement Kit  Diaphragm pumps require rebuild and seal replacements.    Sku Specifications 2047k-02 Two Head Service Kits for Models: 2032 2042 2047 2522K-01 Service Kit ConRod For 2522B-01 2546K-03 SERVICE KIT 2546B-01/C-01/C-02, 2534C-02, 2522C-05

    Read more

    $362.30 - $889.79

    View options

  • 50L Pre-Built Collection Base 50L Pre-Built Collection Base

    50L Pre-Built Collection Base

    50L Pre-Built Collection Base Designed with hydrocarbon extraction in mind. This pre-build collection base boasts a 50lb butane capacity at an 80% fill making it the perfect fit for extractors looking to process up to 10 lbs of biomass material at a 5:1 Butane to biomass ratio. Complete with 1/2" JIC drain and recovery ports, a 1/4" JIC accessory port, a -30hg -250 PSI compound gauge, and a 125 PSI ASME Pressure relief this collection base is versatile in use and highly compatible with most systems. A main staple in our Research & Development lab and standard with our 10LB ECO Closed Loop Extractor this 50L Pre-built Collection Base is perfect for anyone looking to expand their processing capabilities. For speedy hydrocarbon solvent recovery rates this reactor pairs well with our 11KW Express Extraction Heater for passive recovery rates past 1lb/min. Processing Power Volume: 50 Liters Capacity: 50LB of butane @80% Fill Maximum Pressure Rating: 125PSI  Jacket Capacity: 15 liters Specifications 2X Borosilicate Sight glasses 1X 1/2" JIC Drain Port 2X 1/2" JIC Lid Ports 1X 1/4" JIC Lid Port 2X 1/2" Barbed Jacket Connections 1X 125 PSI ASME Safety Valve 1X -30hg-250PSI Compound Pressure Gauges

    Read more

    $3,817.37

  • 6" Spool with 4" Tapered Funnel and KF40 Vac Port 6" Spool with 4" Tapered Funnel and KF40 Vac Port

    6" Spool with 4" Tapered Funnel and KF40 Vac Port

    This Tri clamp adapter piece can allow you to hook up a vacuum line to a tri clamp column and shielding the vacuum line from and falling liquids or oils. These are commonly used in falling film recovery applications.

    Read more

    $347.03

  • 12" Tri-Clamp Dewaxer Columns 12" Tri-Clamp Dewaxer Columns

    12" Tri-Clamp Dewaxer Columns

    12" Tri-Clamp/ Tri Clover Dewaxing Columns This is a 12" Tri-Clamp BVV™ Tri-Clamp Dewaxing Spool. It is intended to have dry ice put into the sleeve to chill the material inside the column. **Note: When selecting a Pipe Hanger choose the size that correlates to the Sleeve OD NOT Spool OD Sizes Available: 12" x 12" Tri-Clamp Dewaxer Column Specifications: Tri-Clamp Size 3" Material 304 Stainless Steel Standard 3A High Polish Sleeve OD 14.000" Spool ID 11.732" Spool OD 12" Flange OD 12.57" Bead Center 12.17" Drain Port 1/4"-18 FNPT (Drain Plug Included) OD = Outer Dimension ID = Inner Dimension Disclaimer to Customer: User assumes all responsibility and risks of the system for all Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractors. They DO NOT come with a standard 1 year system warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.

    Read more

    $555.25

  • GL-18 Cap with Aperture, High Temperature

    Chemglass GL-18 Cap with Aperture, High Temperature

    GL-18 Cap with Aperture, High Temperature   Open top cap for use with GL screw threads. The cap combined with the CG-197 sealing ring will accommodate tubing of the listed diameter. Cap is made from PPS (polyphenylsiloxan) and will withstand temperatures up to 250°C.

    Read more

    $18.05

  • Flask, Round Bottom, 1000mlL, 24/40, Heavy Wall, Single Neck Flask, Round Bottom, 1000mlL, 24/40, Heavy Wall, Single Neck

    Chemglass Flask, Round Bottom, 1000mlL, 24/40, Heavy Wall, Single Neck

    Flask, Round Bottom, 1000mlL, 24/40, Heavy Wall, Single Neck Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. 

    Read more

    $104.11

  • Chemglass Caps With Aperture GL Threads High Temperatures

    Chemglass Chemglass Caps With Aperture GL Threads High Temperatures

    Chemglass Caps With Aperture GL Threads High Temperatures  Open top cap for use with GL screw threads. Cap is made from PPS (polyphenylsiloxan) and will withstand temperatures up to 250°C.  

    Read more

    $15.27

  • 5/16 USS Flat Washer

    5/16 USS Flat Washer

    5/16 USS Flat Washer 5/16 replacement washer for vacuum chamber bulkheads made out of metal.

    Read more

    $0.42

  • Sale -36% Glas-Col Thermocouple Type "J" Mini Plug

    Glas-Col Glas-Col Thermocouple Type "J" Mini Plug

    Glas-Col Thermocouple Type "J" Mini Plug   D x L :  1/4" x 4" Lead Length: 72"

    Read more

    $97.17 $62.47

  • ChemTek - Magnetic Hot Plate

    ChemTek ChemTek - Magnetic Hot Plate

    ChemTek - Magnetic Hot Plate   SPECS Hot Plate Area Size: 6” x 6” Power: 110v-550w Display: LCD Display Speed: 100-1600 RPM Temperature Range: RT - 300c

    Read more

    $527.49

You have seen 624 out of 755 products

Show more products

Stainless Steel Fittings, Triclamp Parts, Vacuum Pumps

Our stainless steel fittings and triclamp parts are precision-machined to ensure leak-free connections and secure assembly across a wide range of systems. Whether you're building a custom extractor or upgrading your current setup, these parts are engineered for strength and chemical resistance.

Need reliable vacuum power? Our selection of vacuum pumps includes oil-free and rotary vane models, delivering strong, steady suction for filtration, degassing, or vacuum oven operation. Beyond vacuum pumps, we also offer a variety of circulation pumps, recovery pumps, and the parts and filters you need to keep your pumps running smoothly.

Find the lab hardware you need to support safe, scalable, and repeatable extraction processes: all from a single trusted supplier.

Login

Forgot your password?

Don't have an account yet?
Create account