Shop Components

748 products

  • BVV™ Pro Series  21.2CFM Corrosion Resistant Two Stage Vacuum Pump BVV™ Pro Series  21.2CFM Corrosion Resistant Two Stage Vacuum Pump

    Pro Series 21.2CFM Corrosion Resistant Two Stage Vacuum Pump

    BVV™  Pro Series  21.2CFM Corrosion Resistant Two Stage Vacuum Pump This is the BVV™ Brand 21.2CFM Two Stage Pro Series vacuum pump. The BVV™ Pro Series 21.2CFM will pull a vacuum down to 0.5mtorr micron effortlessly. The pump is designed with corrosion resistance and long term continuous operation in mind. Comes standard with K-25 fittings, clamps, centering rings and oil mist exhaust filter which returns trapped oil back to the pump and allows for quieter operation. Adjustable gas ballast keeps moisture, solvent, and other contaminants from getting stuck in the pump. Please Refer to these charts for vacuum specifications at altitude and conversions: Vacuum at Altitude Chart Vacuum Conversion Chart Specifications Electrical Requirements: 115v 60Hz Pumping Rate: 21.2CFM Ultimate vacuum without gas ballast: 0.5mtorr Inlet/Outlet connection: KF25/NW25 Flange Oil Volume: 2.3L/2.4 quarts Working Temperature: 5C to 40C Unit Weight: 41KG / 90lbs Recommended oil: Ultragrade 19 CE Compliance: yes Warranty: 2 year limited warranty Pump Warranty Information Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™) If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void. These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties. When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.) To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.

    $4,189.11

  • BVV™ Pro Series  14.1CFM Corrosion Resistant Two Stage Vacuum Pump BVV™ Pro Series  14.1CFM Corrosion Resistant Two Stage Vacuum Pump

    Pro Series 14.1CFM Corrosion Resistant Two Stage Vacuum Pump

    Brand 14.1CFM Two Stage Pro Series This is the BVV Brand 14.1CFM Two Stage Pro Series vacuum pump. The BVV Pro Series 14.1CFM will pull a vacuum down to 0.5 micron effortlessly. The pump is designed with corrosion resistance and long term continuous operation in mind. Comes standard with K-25 fittings, clamps, centering rings and oil mist exhaust filter which returns trapped oil back to the pump and allows for quieter operation. Adjustable gas ballast keeps moisture, solvent, and other contaminants from getting stuck in the pump. Please Refer to these charts for vacuum specifications at altitude and conversions: Vacuum at Altitude Chart Vacuum Conversion Chart Specifications Electrical Requirements: 115v 60Hz Pumping Rate: 14.1CFM Ultimate vacuum without gas ballast: 0.5 micron Inlet/Outlet connection: KF25/NW25 Flange Oil Volume: 2L/2.1 quarts Motor Rate: 1720 RPM Working Temperature: 5C to 40C Unit Weight: 38KG / 84lbs Recommended oil: Ultragrade 19 CE Compliance: Yes Warranty 2 year limited warranty Pump Warranty Information Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™) If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void. These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties. When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.) To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.

    $3,195.08

  • 19/26 Inert Gas Valve for BVV™ ECO Rotary Evaporators

    19/26 Inert Gas Valve for BVV™ ECO Rotary Evaporators

    19/26 Inert Gas Valve for BVV™ ECO Rotary Evaporators     

    $49.70

  • Master Vapor MVP Recovery Pump - 60 PSI

    Master Vapor Pumps MVP Recovery Pump - 60 PSI

    Master Vapor MVP Recovery Pump - 60 PSI  The Master Vapor Pump Model MVP-6CFM is a certified gas recovery pump designed to operate at 60 PSI. This pump is designed specifically for LP-Gas vapor recovery and is ideal for butane or butane / propane mixtures.  Engineering Specifications: Recover LP-Gas vapor at OVER 6 CFM (cubic feet per minute) Recover butane at up to 1 LB/MIN (pounds per minute) Recover and recondense butane at OVER 12 GPH (gallons per hour) Electric motor: explosion proof for C1D1 hazardous areas; rated Class I Gr C & D, Class II Gr F&G Electric motor: 1 HP, 1800 RPM, 60 HZ Pump speed: 190 CPM (cycles per minute) at 60 HZ Size: 17.0” x 19.9” base x 46” tall Weight: 182.5 lb (82.8 kg) Motor Option: Model MVP-6CFM-1PH: Single-phase: 115/208-230V, 13.4/6.7 FLA (full load amps) Model MVP-6CFM-3PH: Three-phase: 208-230/460V, 3.3/1.65 FLA, Inverter-rated Documentation: Product Manual  Technical Data Sheet  Features and Benefits Sheet 

    $15,620.39

  • BVV™ Extraction RACK # 6

    Extraction RACK # 6

    Extraction RACK # 6 (Assembled units come with a 30-day warranty) Note: The unit does not come assembled - select "pre-assembled" from the drop-down menu to have the unit assembled by BVV before shipping Pipe hangers are not included There is no warranty on unassembled units   Shipping Notice: If the customer orders the rack as assembled, then the item will only ship via freight and there will be additional shipping charges.   Extraction Rack 6 Technical Drawing This rack fits the following BVV™ Extraction Systems: 8.5LB Athena 1LB Icarus 5LB Icarus XL Refinement Filter Stackable Diamond Miner Specifications (Does not include height with casters) Main Base Dimensions 21" X 30" Vertical Dimensions 21" X 36"

    $823.62 - $1,107.63

  • Sale -24% BVV™   Extraction RACK # 4

    Extraction RACK #4

    BVV™ Extraction RACK #4 (Assembled units come with a 30-day warranty) Note: The unit does not come assembled - select "pre-assembled" from the drop-down menu to have the unit assembled by BVV before shipping Pipe hangers are not included There is no warranty on unassembled units Shipping Notice: If the customer orders the rack as assembled, then the item will only ship via freight and there will be additional shipping charges. Extraction Rack 4 Technical Drawing This rack fits the following BVV™ Extraction Systems: 2LB Mercurius 5LB Mercurius Specifications (Does not include height with casters) Main Base Dimensions 27" X 30" Side Platform Dimensions 12.5" X 11" Vertical Dimensions 27" X 48" Elevated Platform 27" X 10.5"

    $1,022.43 - $1,306.43

  • Sale -43% SSP 1/2" Compression Fitting Parts SSP 1/2" Compression Fitting Parts

    SSP Corporation SSP 1/2" Compression Fitting Parts

      SSP 1/2" Compression Fitting Parts   ISSD8N: Duolok Tube Fittings, 1/2 in. Nut ISSD8FF: SSP® Duolok® Front Ferrule, FF Series, Nominal Size: 1/2 in, 316 Stainless Steel ISSD8BF: SSP® Duolok® Back Ferrule, BF Series, Nominal Size: 1/2 in, 1/2 in ID, 316 Stainless Steel

    $2.84 - $8.52

  • Sale -12% P5V6 Neocision Distillation Head - USA Made P5V6 Neocision Distillation Head - USA Made

    Neocision P5V6 Neocision Distillation Head - USA Made

    P5V6 Distillation Head P5V6 Distillation Head has 6 sets of vigreux in the distillation column with 34/45 lower joint and 24/40 upper and side joints and includes GL-14 barb connections. MADE IN THE USA Designed for 5 Liter Flasks Set of 6 vigreux to allow for packing media Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media Increased condenser length and diameter for more efficient condensation of vapor with zero clogging *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.  **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    $568.01 $497.01

  • P2 Distillation Head - USA Made P2 Distillation Head - USA Made

    P2 Distillation Head - USA Made

    P2 Distillation Head P2 Packable Distillation Head with 24/40 Joints. Includes GL-14 Barb Connections. Recommended packing media: Raschig Rings, Porcelain Berl Saddles, Glass Beads, Pro-Pak, or Stainless Steel Wool. Key Features: MADE IN THE USA Designed for 1 & 2 Liter Flasks Single set of lowered vigreaux to allow for packing media Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media Increased condenser length and diameter for more efficient condensation of vapor with zero clogging *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.  **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    $852.02

  • Hemispherical Reducer with Filter Plate V3 Hemispherical Reducer with Filter Plate V3

    Hemispherical Reducer with Filter Plate V3

    Hemispherical Reducer with Filter Plate V3 This hemispherical reducer has a built-in filter plate that is welded flush with the top of the reducer. This unique design allows the user to save even more space by combining a filter plate and hemispherical reducer. Made out of 304 stainless steel the filter plate is welded into the hemispherical reducer and has Tri-Clamp connections on both ends.

    $85.20 - $447.31

  • Sale -27% AFS Empty 2.5" CRC Botanical Extraction Filter Cup AFS Empty 2.5" CRC Botanical Extraction Filter Cup

    $21.29 $15.62

  • Mastercool Blue 60" HVAC Hose

    Mastercool Mastercool Blue 60" HVAC Hose

    This HVAC hose will fit 1/4" SAE or JIC fittings. One end of the hose has a fitting made to depress a Schrader valve within the male fitting, the other end of the hose is a standard connection.

    $25.56

  • NPT Stainless Steel Thermowell NPT Stainless Steel Thermowell

    NPT Stainless Steel Thermowell

    NPT Stainless Steel Thermowell These stainless steel thermowells are the perfect addition to an extraction system allowing the user to probe the internal temperate of a system component to know what temperature it is at. This thermowell feature 304 stainless steel and is 2.5" to 6" long with a 1/4" - 1/2" Male NPT threaded connect and a 1/4"-1/2" female NPT threaded connection on the top of the hex head.

    $49.70 - $63.90

  • 3/8" Fractional Tube Fitting Hose

    3/8" Fractional Tube Fitting Hose

    3/8" Fractional Tube Fitting Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications. They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have a tube stub on each end that fits a standard compression fitting.  ***Note: Do not exceed the specified hose bend radius or the inner PTFE liner will kink and the hose integrity will become compromised and should not be used. Stainless Steel Hose Technical Data Sheet Specifications: Connection Type(s): 3/8" Tube Stub Liner Material PTFE (Teflon) Braid Material 304 Stainless Steel Swivel Material 304 Stainless Steel Temperature Rating -65°F to 450°F (-54°C - 232°C) Pressure Rating 1500 PSI Chemical Resistance Excellent Max Bend Radius 4"

    $83.78 - $170.40

  • ASME-Code Fast-Acting Pressure-Relief Valve for Air, Test Ring, Brass Seal, 1/4 NPT, 3-1/8" High ASME-Code Fast-Acting Pressure-Relief Valve for Air, Test Ring, Brass Seal, 1/4 NPT, 3-1/8" High

    ASME-Code Fast-Acting Pressure-Relief Valve for Air, Test Ring, Brass Seal, 1/4 NPT, 3-1/8" High

     ASME-Code Fast-Acting Pressure-Relief Valve for Air, Test Ring, Brass Seal, 1/4 NPT, 3-1/8" High Valve Function Pressure Relief For Use With Air, Inert Gas Activation Pressure Driven Inlet Pipe Size 1/4 Connection Type Pipe Pipe Connection Type Threaded Connection NPT Male Location Bottom Maximum Pressure 300 psi Relief Port Connection Type Vent Relief Port Location Side Set Pressure Configuration Nonadjustable Temperature Range -40° to 400° F Valve Shape 90° Elbow Valve Body Shape Straight Overall Height 3 1/8" Material Body Brass Seal Brass Test Mechanism Ring Valve Type Pop Safety Specifications Met ASME BPVC.VIII RoHS RoHS 3 (2015/863/EU) compliant with exemption 6(c) - Lead in copper alloy REACH REACH (EC 1907/2006) (07/08/2021, 219 SVHC) Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 848140.0000 ECCN EAR99   To protect against damage in air lines, air receivers, compressor tanks, and other air-powered equipment, these valves spring fully open at the set pressure and remain open until the system pressure is restored below the set pressure. All meet ASME Code Section VIII for use with air and inert gas pressure vessels. They have a vented relief port to exhaust discharge directly.

  • Sale -33% CMEP-OL Compressor Top Cover Bearing

    CMEP CMEP-OL Compressor Top Cover Bearing

    CMEP-OL Compressor Top Cover Bearing This is a replacement bearing for the Compressor Top Cover of the CMEP-OL and is fully encased and require no lubrication.    

    $63.90 $42.60

  • Sale -50% 5 Pack Tube Fitting Nuts 1/4" Fitting

    SSP Corporation 5 Pack Tube Fitting Nuts 1/4" Fitting

    SSP - 5 Pack Tube Fitting Nuts SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance, and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations.   Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating Connection Size  1/4 Inch Height      1/4 Inch Width      1/2 Inch Hex Size 9/16 Inch     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

    $8.52 $4.26

  • 12" x (3) 2" x (2) 1/4 FNPT Endcap with Diptube

    12" x (3) 2" x (2) 1/4 FNPT Endcap with Diptube

    12" x (3) 2" x (2) 1/4 FNPT Endcap with diptube This End Cap come with a 11-5/16" long diptube, Two 1/4"-18 FNPT Threaded connection and Three 2" Tri-Clamp/ Tri Clover ferrule welded to the end cap with a sanitary weld with a 0.5" Tube Extension on center ferrule Below the Lid. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 2" Tri-Clamp Connection. These 5 connections are welded on a 12" Tri-Clamp End Cap. Specification Material: 304 Stainless Steel Connection Type: 2" Tri-Clamp - 0.5" Tube Extension on center ferrule Below Lid 11-5/16" Diptube 12" Tri-Clamp 1/4" - 18 FNPT Standard: 3A

    $433.11

  • 6" - 12" Dewax Dry Ice Funnel 6" - 12" Dewax Dry Ice Funnel

    6" - 12" Dewax Dry Ice Funnel

    This stainless steel funnel is meant to help get dry ice into 6" - 12" Dewaxing columns. It simply clips on the side of the dewaxer allowing an easier filling of the dry ice into the dewaxing column.

    $99.40

  • Sale -29% CMEP-OL Fan Bearing

    CMEP CMEP-OL Fan Bearing

    CMEP-OL Fan Bearing This is a replacement bearing for the fan of the CMEP-OL and is fully encased and require no lubrication.  

    $49.70 $35.50

  • Sale -29% Pipe Cap Pipe Cap

    SSP Corporation Pipe Cap

    SSP - Pipe Cap SSP Instrumentation TruFit® is manufactured from fully-traceable raw material to close tolerances and superior surface finishes. TruFit® provides optimal performance when installed in accordance with SSP’s recommendations and the design parameters appropriate for each type of connection – tapered thread, straight thread, and weld & braze. TruFit® components are cleaned in accordance with SSP documented work instructions using equipment calibrated to NIST standards with environmentally-safe and stable agents, ultrasonics, and heat/ temperature to remove all residual oil, grease, and loose particles. Stainless steel components are passivated to the requirements of MIL QQ-P-35 and ASTM A 967. ***Note: ALL NPT Threads REQUIRE the user to properly install the fitting by using a thread sealant to prevent leaks. Best Value Vacs recommends GAS PTFE Tape Specifications Connection Type 1 Female NPT Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) 1/4" - 7750 3/8" - 6800 NPT Pressure Rating >10,000PSI ASME B31.3   SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

    $9.94 $7.10

  • 6" Pre-Built BIFLOW Hemispherical Lid with BVV 316SS Full Bore Valves 6" Pre-Built BIFLOW Hemispherical Lid with BVV 316SS Full Bore Valves

    6" Pre-Built BIFLOW Hemispherical Lid with BVV 316SS Full Bore Valves

    6" Pre-Built BIFLOW Hemispherical Lid with BVV 316SS Full Bore Valves (This Lid is fully assembled and Nitrogen Tested for Leaks at Best Value Vacs) This 6" Best Value Vacs Hemispherical lid is fully assembled and nitrogen tested for leaks at our warehouse. This lid comes with 3 BVV 316SS Full Bore Valves with (2)1/4" and (1)3/8" 37° JIC Flares, compound gauge and the 4th hole is plugged to allow for future expansion. These lids are made out of 304 stainless steel and have 3 1.5" Tri-Clamp ports with the middle port having an extended tube to control solvent flow. Key Features: Pre-built and Nitrogen Tested for Leaks BVV 316SS Full Bore Valves with 1/4" and 3/8" 37° JIC Flares -40F to 450F 304 High Polish Stainless Steel Compound Gauge (-30)-0-(150PSI) Specifications Lid Material 304 Stainless Steel Valve Material 316SS Full Encapsulated PTFE Core - 1/4 Turn Flare Size (2)1/4" and (1) 3/8" 37° JIC Tri-Clamp Size(s) (3) 1.5" Ports x 6" Tri-Clamp Nitrogen Tested Yes  

    $627.66

  • 6" x 4" x 3" x (2) 1/4" FNPT Tri-Clamp Skylight

    6" x 4" x 3" x (2) 1/4" FNPT Tri-Clamp Skylight

    Specifications: 304 Grade Stainless Steel Reducer 'Skylight' w/ High Polish interior 6" Triclamp x 4" Triclamp x 3" Triclamp (Can be used as viewport to see inside) x (2)1/4" FNPT 7" Tall

    $276.91

  • Foam Insulation for Hose and Tubing - 6 Feet Foam Insulation for Hose and Tubing - 6 Feet

    Foam Insulation for Hose and Tubing - 6 Feet

    Foam Insulation for Hose and Tubing – 6 Feet Professional-grade foam insulation designed for silicone tubing, stainless steel braided hose, and compression hard line tubing. Available in three inner diameter options—3/8", 1/2", and 5/8"—each engineered to match your specific tubing outer diameter. The 3/8" option slides directly onto hose, while 1/2" and 5/8" sizes feature a taped seam for secure installation. All lengths are 6 feet. Sizing Guide Foam Insulation Size 3/8" 1/2" 5/8" Compression Tube 3/8" 1/2" — Stainless Steel Braided Hose 3/8" * 1/2" — Silicone Tube 1/4" 3/8" 1/2"   Specifications Composition Nitrile, PVC Flame/Smoke Rating 25/50 R-Value R4.1 Temperature Range -297°F to 220°F (-182.78°C to 104.44°C) Length 72 inches (6 feet) Country of Origin USA * The 3/8" foam insulation does not have a seam and cannot be easily slid over stainless steel braided hose with permanent end fixtures.

    $48.28 - $63.90

  • BVV Compression Extractor End Cap (2) 1.5" x (2) 3/8" Compression x 1/4" Compression

    Compression 6" Extractor End Cap (2) 1.5" x (2) 3/8" Compression x 1/4" Compression

    Compression Extractor End Cap (2) 1.5" x (2) 3/8" Compression x 1/4" Compression This End Cap come with (2) 3/8" and (1) 1/4" Female Compression Connection and (2) 1.5" Tri-Clamp ferrule welded to the end cap. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 1.5" Tri-Clamp Connection. These 3 connections are welded on a 6" Tri-Clamp End Cap. Specification Material: 304 Stainless Steel Connection Types: (2) 1.5" Tri-Clamp 6" Tri-Clamp (2) 3/8" and (1) 1/4" Female Compression Connection Standard: 3A  

    $241.41

  • Sale -27% Eisco Labs Base Retort Stand Heavy Duty 8"x5" Eisco Labs Base Retort Stand Heavy Duty 8"x5"

    Eisco Labs Eisco Labs Base Retort Stand Heavy Duty 8"x5"

    Eisco Labs Base Retort Stand Heavy Duty 8"x5"   HIGH QUALITY || Rectangular retort base made of chemical-resistant cast iron with a blue coating STABILITY || The 8" long by 5" wide base weighs 3lbs, providing superb stability for experiments & setups TAPPED HOLE FOR ROD || Base features a tapped hole for a 10mm x 1.5mm threaded rod (sold separately). Best used with Eisco Labs rod series: CH0657, CH0658, CH0659 GREAT FOR CLASSROOM &LABORATORIES || The durable and sturdy construction of this set...

    $31.24 - $34.08

  • 24/29 Valve

    24/29 Valve

    24/29 Valve For 10L-50L Best Value Rotary Evaporators. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    $49.70

  • Sale -37% Neocision Spectra Veg LED Grow Light - DLC Listed Neocision Spectra Veg LED Grow Light - DLC Listed

    Neocision Spectra Veg LED Grow Light - DLC Listed

    Neocision Spectra Veg LED Grow Light Neocision Veg 340 led grow lights are designed for multi-tier racking systems used in vertical grow applications. Stronger vegetative growth leads to better flower yields. Our high content blue keeps plants from stretching and provides tighter internodal spacing. Neocision LED Grow Lights Optimized ForVegetative Stage  Most vendors will recommend the same grow light for flower and veg, recommending you dim the fixtures during vegetative stage. We have custom designed two grow lights, the Veg 340 and Veg 500 lights, for racks and over benches during the vegetative stage. How and why do we do this? First, our Neocision 4-bar LED fixtures fit in four-foot-wide racks, by far the most popular width for multi-tier racks on the market today. Four-foot-wide racks maximize plant layouts to optimize canopy and reduce operational costs by making it easier for workers to reach into the canopy to manage and inspect their veg plants. Second, our veg lights have multiple hanging options that allow for many alternative airflow solutions to improve overall plant health. For vertical racks, we strongly recommend under canopy airflow solutions like Dual Draft, if possible. Third, our Veg 340 and Veg 500 lights can be accessorized with custom length power cables sized to fit your rack and spacing to reduce electrical installation costs while keeping wires organized and out of the way for workers. Fourth, we have increased blue spectrum in our Neocision veg lights which keep your plants shorter in racks and tighten internodal spacing by reducing plant stretch. Watch this Bruce Bugbee of Utah State University video on optimal spectrum for plant growth and development here! Increased blue will expedite your time to flower, keep your plant heights manageable and ultimately provide stronger plants for increased yields. Fifth, our veg lights are compatible with any 0-10V control system for light intensity management with built-in controller ports and controller cables included with every light. Lastly, we offer two different wattage levels (340W and 500W) so growers can hang lights at a set point without having to raise and lower lights depending on the height of each tier of growth.   FEATURES: Tested efficacy of 2.72 μmols/J at 240 VAC PPF (400-700nm): 929 μmol/s Industry Leading Horticulture LEDs Input Voltage: 200-277 VAC Fixture with Driver (net weight): 16.6 lbs RJ Port for Plug and Play Control Systems Power Consumption: 342W AC (tested) Folding Design for Fast and Easy Installation Life Span: 50,000 hours Light Distribution: 120 degrees 7 Year Limited Warranty FEATURES: Folding 4-Bar LED Luminaire DC power cable with male connector LED Driver AC power cord with 240 V Plug Knob Screws (4x) Carabiner Hooks (6x) Stainless Steel Ropes – 450 mm length (4x) Rope Ratchet Hanger Kits (2x) RJ Data Cable – 3 meters (1x) SPECTRUM AND EFFICACY PPF Efficacy: 2.5~2.60 at 120VAC - 240VAC Photon Flux (µmol/s) (400-700nm): 853 Photon Flux Blue (µmol/s) (400-500nm): 221 Photon Flux Green (µmol/s) (500-600nm): 390 Photon Flux Red (µmol/s) (600-700nm): 242 Total Blue/Red - Energy Bands: 463 % Blue: 25.94% % Green: 45.70% % Red: 28.53% POWER Power Consumption: 340W AC Driver: Sosen Power Factor: >0.95 Surge Protection: 6 KV 120V: 2.90 A 208V: 1.75 A 240V: 1.51 A 277V: 1.31 A DIMENSIONS Fixture Size (driver mounted on the fixture): (L) 43.9” x (W) 22” x (H) 4.1” Fixture Size (without driver): (L) 43.9” x (W) 22” x (H) 1.6” Power Supply Dimension: (L)16.9” X (W) 6.5” X (H) 3” Driver Net Weight: 6 lb. Fixture Net Weight: 6 lb. OTHER Mounting Height >6” above canopy Beam Angle 110 Degree Input Voltage 100 - 277 VAC Manual Dimming Knob Yes Built In Control Ports Yes Standard Power Cord (Extensions available) AWG 18, 6 Foot Standard Plug 240 VAC - NEMA 6-15P Substitute Plugs (Upon request at order) 120 VAC, 277 VAC, Pigtails Adjustable Height Hanging Kit Included Yes Fixture Warranty 7 Years Limited Driver Warranty 8 Years Limited ETL Safety Certified Conforms to UL 1598:2018 Ed.4Certified to CSA C22.2#250.0:2018 Ed.4*ETL Safety Certified No. 5020070 DLC Listed Yes

    $461.51 $289.69

  • Edwards E2M28 21 CFM Dual-Stage High Capacity Vacuum Pump

    Edwards Edwards E2M28 21 CFM Dual-Stage High Capacity Vacuum Pump

      Edwards E2M28 21 CFM Dual-Stage High Capacity Vacuum Pump ***Note: This item Will Ship by Freight only***   The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapor – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) air cooled motor.Each EM pump is supplied with 2 x 1 liter of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately.   Technology  The motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open.You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has two oil drain-plugs to allow either gravity oil drain or pressure oil drain.   Features and Benefits  The pump is designed for reliable, long‑term operation. Thermal overload device prevents overheating (single phase only). The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor. The motors are totally enclosed and are cooled by the motor cooling fan. Full height O ring sealed oil sight glass for easy checking of oil level and condition. Large sight glass and operating oil range. IE3 energy efficient 3 phase motor used with E2M28.   Edwards E2M28 21 CFM Dual-Stage High Capacity Vacuum Pump. The EM range of oil-sealed rotary pumps - renowned for its high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour - has become the industry standard laboratory and light industrial applications. The E2M28 pump is a two-stage, direct drive, sliding vane pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.     Specifications Displacement 50Hz 32.2 m3h-1 / 19 ft3min-1 60Hz 38.9 m3h-1 / 22.3 ft3min-1 Speed (Pneurop 6602) 50Hz 27.5 m3h-1 / 16.2 ft3min-1 60Hz 33.0 m3h-1 / 19.5 ft3min-1 Ultimate vacuum (total pressure) without gas ballast 1 x 10-3 mbar / 7.5 x 10-4 Torr with gas ballast 1.5 x 10-2 mbar / 1.1 x 10-2 Torr with Fomblin® 1 x 10-2 mbar / 7.5 x 10-3 Torr Inlet connection NW25 flange Outlet connection** Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole Max allowed pressure at outlet 0.5 bar gauge / 7 psig Max water vapour pumping rate – GB II 220 gh-1 Max inlet pressure for water vapour 30 mbar / 23 Torr Max water vapour pumping rate 0.7 kg h-1 Operating temperature range 13 – 40 °C Nominal rotation speed 1440 / 1720 rpm Motor power 50 Hz 0.75 kW Motor power 60 Hz 0.90 kW Power Connector 1-ph* IEC EN60320 C19 Weight 44 kg / 97 lbs Noise 57 dB(A) @ 50 Hz Oil capacity - max 1.5 litre Oil capacity - min 1.2 litre Recommended oil (supplied) Ultragrade 19     * Pumps listed with IEC connector only ** The FX are supplied with NW25 outlet connection    ** POWER CORD NOT INCLUDED. RECOMMEND FOR CUSTOMER TO WIRE PUMP TO OUTLET WITH EXACT LENGTH. DO NOT USE EXTENSIONS**   **RECOMMEND FOR CUSTOMER TO HAVE ELECTRICIAN WIRE PUMP TO OUTLET WITH EXACT LENGTH**       Pump Warranty Information Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™) If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void. These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.  When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.) To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.

    $12,668.14

  • BVV Quick Disconnect Male and Female 1/2" FNPT BVV Quick Disconnect Male and Female 1/2" FNPT

    BVV Quick Disconnect Male and Female 1/2" FNPT

    BVV Quick Disconnect Male and Female 1/2" FNPT Description [Size]: 1/2" Female NPT; Pressure-proof: 1500 PSI; Flow:12 gpm. [Quality Materials]: The Quick Disconnect is made of high quality 304 stainless steel and The sealing material is made of fluorine rubber which is durable, stable, rust and corrosive resistance and good for long time using. [Precise Design]: Steel balls are used to connect the adapter which makes the sealing better, both ends open-closed. [High Working Temp. & Wide Range of Applications]: The Quick Disconnect provides good sealing and easy to unload. It can be used for connecting two pipes in the double seal system. It is suitable for different media including water, gas, and oil with working at -4°F~392°F.

    $198.81

  • Sale -46% Branch Tee Branch Tee

    SSP Corporation Branch Tee

    SSP - Branch Tee SSP Instrumentation TruFit® is manufactured from fully-traceable raw material to close tolerances and superior surface finishes. TruFit® provides optimal performance when installed in accordance with SSP’s recommendations and the design parameters appropriate for each type of connection – tapered thread, straight thread, and weld & braze. TruFit® components are cleaned in accordance with SSP documented work instructions using equipment calibrated to NIST standards with environmentally-safe and stable agents, ultrasonics, and heat/ temperature to remove all residual oil, grease, and loose particles. Stainless steel components are passivated to the requirements of MIL QQ-P-35 and ASTM A 967. ***Note: ALL NPT Threads REQUIRE the user to properly install the fitting by using a thread sealant to prevent leaks. BVV recommends GAS PTFE Tape     Specifications Connection Type 1 Female NPT Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) 1/4" - 7750 3/8" - 6800 NPT Pressure Rating >10,000PSI ASME B31.3     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!   Dimensions A 1.76 in E 0.28 in H 3/4 in P 1/4 in L 0.88 in S 1.09 in

    $39.76 $21.30

  • Bore Through 1/2" Compression Fitting x 1/2" MJIC

    Bore Through 1/2" Compression Fitting x 1/2" MJIC

    Bore Through 1/2" Compression Fitting x 1/2" MJIC made out of 304 stainless steel.  

    $25.56

  • Sale -43% Duolok Female Elbow Duolok Female Elbow

    SSP Corporation Duolok Female Elbow

    SSP - Female Elbow SSP Instrumentation TruFit® is manufactured from fully-traceable raw material to close tolerances and superior surface finishes. TruFit® provides optimal performance when installed in accordance with SSP’s recommendations and the design parameters appropriate for each type of connection – tapered thread, straight thread, and weld & braze. TruFit® components are cleaned in accordance with SSP documented work instructions using equipment calibrated to NIST standards with environmentally-safe and stable agents, ultrasonics, and heat/ temperature to remove all residual oil, grease, and loose particles. Stainless steel components are passivated to the requirements of MIL QQ-P-35 and ASTM A 967. ***Note: ALL NPT Threads REQUIRE the user to properly install the fitting by using a thread sealant to prevent leaks. BVV recommends GAS PTFE Tape Specifications Connection Type 1 Female NPT Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) 1/4" - 7750 ASME B31.3   SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!   Dimensions A 1.17 in Bx 0.89 in By 0.89 in C 0.70 in D 0.60 in E 0.19 in G 9/16 in H 11/16 in P 1/4 in T 1/4 in

    $11.36 - $35.50

  • Mastercool Nitrogen Pressure Regulator Kit

    Mastercool Mastercool Nitrogen Pressure Regulator Kit

    Mastercool Nitrogen Pressure Regulator Kit   Product Description Mastercool’s new nitrogen regulator is specifically designed to meet the specifications of HVAC/R and automotive A/C systems. This single stage nitrogen regulator is used to test systems for leaks when they do not contain refrigerant. 1/4” SAE flare outlet port, with control valve, to keep pressure on the regulator at all times T-Handle for ease of pressure adjustment 63 mm (2 1/2”) gauges with guards High pressure gauge 4400 psig (300 bar) Low pressure gauge 1000 psig (70 bar)  

    $269.81

  • Straight Inlet Adapter with Hose Barb

    Straight Inlet Adapter with Hose Barb

    Straight Inlet Adapter with Hose Barb This straight inlet adapter allows the user to connect a male and female 24/40 jointed connection and attached a flexible hose for vacuum if needed. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.  **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    $42.60

  • Sale -43% Glas-Col Stirmantle

    Glas-Col Glas-Col Stirmantle

    2L Glas-Col Stirmantle Glas-Col offers two types of StirMantles: Electromagnetic (50 to 750 rpm) and Motor Driven (100 to 1850 rpm). The maximum rpms available for each type depends on the viscosity of the solution being heated. Electromagnetic StirMantles are typically used with aqueous solutions like water, while the Motor Driven units use a powerful magnet for higher viscous solution like oils. StirMantles withstands 400°C internal operating temperature. EMS series include the heating mantle, speed control and stir-bar.  WARNING: chemical spillage, overheating, overloading, and general misuse will greatly reduce service life! Note: The temperature probe this mantle comes with can only be used with a thermowell. If you are using it with BVV™ glassware you will need to add SKU: TK1/4-12 or TK1/4-18 depending on what mantle size is selected.

    $1,491.04 $852.02

  • 3/8" Clear Reinforced PVC Tubing 20 Foot Roll

    3/8" Clear Reinforced PVC Tubing 20 Foot Roll

    3/8" Clear Reinforced PVC Tubing – 20 Foot Roll Premium-grade PVC tubing engineered for demanding applications across food, beverage, pharmaceutical, and industrial sectors. This crystal-clear tubing features NSF-51 certification and USP Class VI rating, ensuring compliance with stringent safety and quality standards. Specifications & Features: Phthalate and BPA-free formulation with FDA-compliant ingredients Longitudinally reinforced with braided polyester yarn for pressure resistance and reduced elongation Crystal-clear construction enables visual product flow monitoring Self-extinguishing, non-conductive, and silicone-free Compound hardness: 80A Lightweight, non-marking, and chemical-resistant Supplied in one-piece lengths for seamless installation Ideal Applications: Food and beverage processing Pharmaceutical and medical equipment Agricultural systems Industrial air and water transfer Light vacuum applications Sight gauges and drain lines Liquid and powder transfer systems

    $51.12

  • Sale -38% Duolok Male Elbow Duolok Male Elbow

    SSP Corporation Male Elbow Tube Fitting

    SSP - Duolok Male Elbow SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance, and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations.   Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Connection Type 2 Male NPT Connection Size 2 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating NPT Pressure Rating >10,000PSI ASME B31.3   SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!   Dimensions A 1.06 in Bx 0.77 in By 0.92 in C 0.70 in D 0.60 in E 0.19 in F 0.56 in G 9/16 in H 1/2 in P 1/4 in T 1/4 in

    $11.36 - $45.44

  • Wireless Digital Vacuum Gauge 1~19,000 Microns Wireless Digital Vacuum Gauge 1~19,000 Microns

    Wireless Digital Vacuum Gauge 1~19,000 Microns

      VGW-mini Wireless micron vacuum gauge measures vacuum via just one service port and with no loss of refrigerant. Its compact, robust and smart design support HVAC technicians with numerous intelligent features like the graphic display of measurement data in the Elitech Tools App. Its smart Bluetooth integration allows for data to be stored and evaluated reliably and efficiently, thus saving precious time and resources. Product Features High Accuracy The digital vacuum gauge achieves precise deep vacuum measurements down to single digit resolutions and provides notifications when the evacuation target is met. Smart APP Control Control your micron tester remotely and navigate through all measurement data via Smartphone or Tablet. Quickly and conveniently document your job, finalize your report and export - directly from the job site. Intelligent Judgement of H2O Status The vacuum meter automatically judges physical state of H2O by comparing ambient temperature and water saturation temperature corresponding to the vacuum in the system. Large, Easy-to-Read Display Continual digital readout of evacuation process can be viewed easily on the large, full-view LCD screen. Rechargeable Lithium Battery Built-in rechargeable lithium battery can work up to 20 hours per single full charge, saving troubles of frequent battery change.     Product Specifications Measuring Range: 0-19000 micron Operating Temperature: -4℉~140℉ (-20°C~60°C) Interface: 1/4 SAE Accuracy: 1~10,000 microns: ±10% of readings ±10 microns10,000~19,000 microns: ±20% of readings Resolution: 0-400 1 Micron400-3000 10 Micron3000-10000 100 Micron10000-19000 250 Micron Vacuum Units microns, mTorr, in/hg, Pa, Torr, KPa, mbar and psia Battery rechargeable lithium battery (1,000mAh) Overload 27.5 bar Certification CE

    $248.51

  • Compression Ball Valve

    Compression Ball Valve

    BVV manually operated two-way ball valves provide quick ¼ turn directional flow control of fluids in instrumentation and process systems. Features: Directional handle indicates flow direction Panel Mountable 90-degree actuation Straight through flow path Micro-finished ball provides positive seal Free-floating ball design provides compensation for seat wear for repetitive sealing Blow-out proof ball & stem BVV™ Compression Ball Valve - Data Sheet Specifications Body Material 316L Stainless Steel Pressure Rating @ 100F 1000 PSIG Connection Type 1 Double Ferrule Tube Fitting Connection Size 1 Specified by User Connection Type 2 Double Ferrule Tube Fitting Connection Size 2 Specified by User Handle Type Nylon-Stainless Steel Insert Handle Color Black Packing Material PTFE  

    $184.60 - $255.61

  • KF Sight Glass KF Sight Glass

    KF Sight Glass

    These 4 piece sight glasses can hold high vacuum levels on a system with KF connections. The housing is made of 304 stainless steel with a viton x-profile seal. The glass is tempered, impact resistant glass that increases the longevity of the sight glass. The connection sizes available are: KF25 (NW25) KF40 (NW40) KF50 (NW50) *Light assembly may be required with a 5/64" Allen wrench. Before assembly, a light application of vacuum grease on the gasket is recommended. 

  • Edwards RV8 6.9 CFM Dual-Stage Vacuum Pump

    Edwards Edwards RV8 6.9 CFM Dual-Stage Vacuum Pump

    Edwards RV8 6.9 CFM Dual-Stage Vacuum Pump Edwards RV pumps have become the industry standard for scientific primary pumping applications. RV pumps are uniquely capable of delivering high or low throughputs with high ultimate vacuum. This, combined with ultra-low noise levels, makes them ideal for a wide range of applications including GCMS and other small bench top type applications.All pumps are approved to UL standards by an external test house. Edwards has a global network, providing world-wide support for product applications and service.Supplied with: 1 litre of Ultragrade 19 oil, inlet filter and O-ring. Fomblin must be purchased separately for PFPE RV pumps. Technology All our RV pumps are significantly quieter noise levels of 48 dBA 50Hz are typically half the noise of a conventional pump and have been achieved by extensive work on the drive train and motor. The pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughput modes with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application. In its high vacuum mode, the RV pump is ideal for analytical instruments, electron microscopes, physics research, backing turbo pumps, TV tube pumping and leak detection applications. Configure the same pump in the high throughput mode, and it becomes suitable for mass spectrometer inlet systems, distillation, laboratory furnaces, backing vapor pumps, solvent concentration, freeze drying and other drying applications. The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfigured at any time, even when the pump is running.   Applications Analytical instruments Centrifuges, ultra-high speed Coating Degassing/curing - oil, epoxy resin Distillation/extraction/filtration Freeze drying Furnaces Gas bottle filling/emptying Gel drying Glove boxes, ovens Laboratory bench top vacuum Leak detectors, Helium Load locks and transfer chambers Refrigeration manufacture Research and development Rotary, centirfugal evaporators Scanning electron microscopes - SEM SEM/FIB (ion beam repair) Solvent recovery Surface science instruments Turbomolecuar backing pumps Specifications    Model  RV8  Vacuum pump type  Dual stage rotary vane  Power  110V 50/60Hz 1-PH 5A or 220V 50/60Hz 1-PH 2.1A  Power connection  US standard 3-prong plug (NEMA 5-15P)  Motor power at 50Hz  450 watts  Motor power at 60Hz  550 watts  Peak pumping speed  6.9 CFM at 60Hz  Ultimate vacuum without gas ballast  1.5 micron/millitorr  Ultimate vacuum with gas ballast  60 micron/millitorr  Unit dimensions (WxDxH)   18.5 x 6.2 x 8.9"  Shipping dimensions (WxDxH)  31 x 11.5 x 19"  Max water vapor inlet pressure  28.5 torr (38 mbar)  Max allowed pressure at outlet  0.2 bar gauge/2.8 psig  Operating temperature range  54°F to 104°F (12°C to 40°C)  Oil capacity  Minimum 0.48 quart (0.45 L), maximum 0.8 quart (0.75 L)  Oil type  Ultragrade 19  Nominal rotation speed at 50/60Hz  1500/1800 rpm  Noise level  48 dB(A)  Inlet connection  NW25/KF25  Outlet connection  NW25/KF25  Unit weight  57 Lbs  Shipping weight  70 Lbs  Users manual  Click here to download  Certification  CE, UL

    $8,410.87 - $9,328.21

  • P2V4 Neocision Distillation Head - USA Made

    Neocision P2V4 Neocision Distillation Head - USA Made

    P2V4 Neocision Distillation Head P2V4 Short Path Distillation Head includes 4 sets of Vigreux with 24/40 Joints and GL-14 Barb Connections.  Key Features: MADE IN THE USA Designed for 1 & 2 Liter Flasks Set of 4 Vigreux to allow for better seperation of fractions without packing material Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media Increased condenser length and diameter for more efficient condensation of vapor with zero clogging *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    $568.01

  • Upgraded TRS21 Compressor Head Complete, Stainless Fittings, Viton Upgraded TRS21 Compressor Head Complete, Stainless Fittings, Viton

    Upgraded TRS21 Compressor Head

    Upgraded TRS21 Compressor Head Complete, Stainless Fittings, Viton Upgrade your TRS21 by purchasing a new Compressor Head with Viton O-rings for butane and propane gas compatibly and stainless steel fittings to meet FDA guidelines on handling of consumable products.  This head is assembled here in the USA and is a direct replacement for any TRS21 Compressor Head. 

    $255.61

  • BVV™ Extraction RACK # 5

    Extraction RACK # 5

    Extraction RACK # 5 (Assembled units come with a 30-day warranty) Note: The unit does not come assembled - select "pre-assembled" from the drop-down menu to have the unit assembled by BVV before shipping Pipe hangers are not included There is no warranty on unassembled units   Shipping Notice: If the customer orders the rack as assembled, then the item will only ship via freight and there will be additional shipping charges.   Extraction Rack 5 Technical Drawing BVV™ Extraction RACK # 5 is similar to Extraction Rack #3 but with thicker vertical support beams. This rack fits the following BVV™ Extraction Systems: 10LB Mercurius 30LB Closed Loop Extraction System   Specifications (Does not include height with casters) Main Base Dimensions 39" X 30" Vertical Dimensions 39" X 48"

    $1,384.53 - $1,668.54

  • 1/2" x 0.035 wall 316SS Hard Line Tubing 5FT

    1/2" x 0.035 wall 316SS Hard Line Tubing 5FT

    1/2" x 0.035 Wall 316SS Hard Line Tubing – 5FT Premium 316 stainless steel hard line tubing engineered for high-performance compression fitting systems. Built to withstand demanding industrial and marine applications, this corrosion-resistant tubing delivers exceptional durability and reliability where it matters most. Key Specifications: Length: 5 feet Material: 316 Stainless Steel (ASTM A-269) Diameter: 1/2" with 0.035" wall thickness Maximum Working Pressure: 2339 PSIG Ideal for applications requiring superior corrosion resistance and structural integrity. Compatible with standard compression fittings for seamless integration into existing systems.

    $227.21

  • Sale -43% Union Cross Union Cross

    SSP Corporation Union Cross

    SSP - Union Cross SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance, and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations. Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating     SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!

    $49.70 $28.40

  • Jacketed Sucker Pot with Ring Stand Jacketed Sucker Pot with Ring Stand

    Jacketed Sucker Pot with Ring Stand

    Jacketed Sucker Pot with Ring Stand  This jacketed sucker pot works perfectly as a collection base for extracted oil and easy discharge or as a storage vessel for distillate dispensing. Both of these applications are made easier with the use of a heater running through the jacket.  Connections: -Top: 6" Tri-Clamp -Bottom: 1/4" FNPT -Jacket: 1/4" FNPT (2x ports)

    $781.02


You have seen 480 out of 748 products

Stainless Steel Fittings, Triclamp Parts, Vacuum Pumps

Our stainless steel fittings and triclamp parts are precision-machined to ensure leak-free connections and secure assembly across a wide range of systems. Whether you're building a custom extractor or upgrading your current setup, these parts are engineered for strength and chemical resistance.

Need reliable vacuum power? Our selection of vacuum pumps includes oil-free and rotary vane models, delivering strong, steady suction for filtration, degassing, or vacuum oven operation. Beyond vacuum pumps, we also offer a variety of circulation pumps, recovery pumps, and the parts and filters you need to keep your pumps running smoothly.

Find the lab hardware you need to support safe, scalable, and repeatable extraction processes: all from a single trusted supplier.

Login

Forgot your password?

Don't have an account yet?
Create account