Light Movers Hangers

Auxilliary Trolley for LR3.5 (Slave Trolley) Light Rail 3.5 is rated to 35 lbs Light Rail 5.0 is rated to 100 lbs

Read more less

The RoboStik is used for hanging a horizontal reflector from a LightRail 3.0, 3.5 or 4.0 perpendicular to the direction of travel. This item is not needed when hanging a horizontal reflector parallel to the direction of travel, but many creative uses have been found for them. It is packaged with hardware and instructions in a white box with label tape. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs Used for hanging a horizontal reflector from a LightRail perpendicular to the direction of travel

Read more less

The Light Rail 5 Add-A-Bar kit allows for an additional (3) light maximum expansion to existing Light Rail 5 complete systems. Add-A-Bar kits may need an additional 4' Auxiliary rail (LR5AUXRAIL) for systems that demand more than 2 total crossbar setups. Kit Contains: Adjustable Crossbar (81", 87", 93") Light Rail 5 Auxiliary Trolley Sectioned Push-Pull Rod Mounting Hardware Instructions

Read more less

For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 3.5 Intelli-Drive is without question the finest linear lamp mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail works great with all reflectors! Light Rail 3.5 is rated to 35 lbs Light Rail 5.0 is rated to 100 lbs

Read more less

LightRail 3.5 IntelliDrive 10 RPM motor travels approximately 4 feet per minute and has a 0-60 second adjustable time delay for pausing the lamp at the ends of its travel. This helps to promote even growth from end to end and allows for equal light-time for the entire run. It comes complete with installation hardware, instructions and a 2-year manufacturer’s warranty. Note: No rail is included. Great for customers who already have a rail or prefer the one-piece 2 meter rail. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs   Quiet and smooth operation Adjustable time delay from 0-60 seconds Helps to promote even growth

Read more less

Hydrofarm Easy Glider Light Hanging Kit   The Easy Glider light hanging kit is ideal for all your light and reflector hanging needs. It features easy push button and glide action to adjust your reflectors or lights for optimum performance. The all-metal construction features a 6 1/2 foot cable that holds up to 44 pounds per Easy Glider. Each package features one pair of Easy Gliders.

Read more less

Phantom DE Short Wire Hangers Gen III   Product Details   Designed to easily mount your Phantom DE fixture from Unistrut or greenhouse C-channel strut for level suspension. Accommodates trusses up to 2 1/2" wide. Works with GENIII Phantom DE series ballast PHB5015,PHB5020, PHB5025 and PHB5030- Phantom Commercial DE 1000W HPS 240/277/347 and 480v

Read more less

Switch Stop Kit for LightRail 3.0, 3.5 and 4.0 For replacing the occasional misplaced switch stop. The SS KIT comes with 3 pairs of switch stops and that equals 6 thumb screws and 6 slide nuts. Packaged in a 4" x 4" ziplock. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

LightRail 5 Auxiliary Rail This is used with LightRail 5 and a second Add a Bar Kit (AAB KIT LR5), see item “R”, to accommodate a 3 crossbar system. The LightRail 5 Auxiliary Rail Item is packed in a tube with installation hardware and instructions. Note: The LightRail 5 Auxiliary Rail does not have rail alignment pins and does not need them because travel across the seam will not be necessary. Great for multiple reflectors Extremely heavy duty and functional—90+ lb. capacity if properly balanced Comes with an adjustable crossbar, 8' rail, and high-torque 4 RPM motor

Read more less

Product Details Hydrofarm's Light Riser Hanging System makes it easy to hang reflectors, filters or other equipment. Simply secure one of the quick release carabiner clips to a firm location, attach the other clip to the object you want to hang, and then pull the cord until the desired height is reached. It's as simple as that. Holds up to 150 lbs (75 lbs per ratchet) Quick release switches let you loosen the rope and re-adjust to the height required Locking system secures your object in place Durable construction will never break, slip, or rust Includes 4 quick release carabiner clips and 8 feet of tough braided polypropylene rope

Read more less

Add A Lamp Hardware Kit, trolley+mounting hardware The Add A Lamp Hardware Kit includes a trolley and mounting hardware. It is used to hang additional crossbars or reflectors. It can also be used to festoon your power cords or cooling ducts. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs Includes trolley and mounting hardware Used to hang additional crossbars or reflectors Can also be used to festoon your power cords or cooling ducts

Read more less

This item is a replacement motor for the LightRail 4.0 AdjustaDrive light mover. It has both a 0- to 60-second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute adjustable speed control that covers a wide range of lamp intensities and travel distances. Comes complete with installation hardware and instructions. Note: No rail is included.  The newest linear light mover available from Gualala Robotics Inc. Zero to 60 second adjustable time delay RPM is adjustable from 6 RPM (2 ft per minute) to 10 RPM (4 ft per minute)

Read more less