Come See Us At MJBiz Con! Booth #1828

CPS Recovery Pumps

24 products


  • CPS TRS21 Anti-spark/explosion pump

    CPS TRS21 Anti-spark/explosion pump

    The TRS21 is an Anti-Spark/Explosion pump designed and built specifically for R-600, Ignition Proof Construction meets ANSI/ISA 12:12.1 The pump can be used to recirculate the solvent through the system increasing speed of processing and yield, or just to reclaim the solvent to greatly increase recovery time to minutes. The Upgraded version of the TRS21 comes pre-installed with higher quality internal components that increase recovery speed drastically and also comes with 3/8" JIC and SAE Flares to reduce restrictions in the pump and increase flow/recovery rates. Upgraded Version Includes: Hand Rebuilt in the USA with premium upgraded materials and parts. Custom Hand Set piston displacement for each cylinder set. Standard Stainless Steel 1/4" Flares + 3/8" JIC flares included Food Grade Grease and Lubricants in bearings and wristpins.  Custom 2 Piece Stainless Pistons for easy rebuilds GEN III Piston Seals (lasts 700% longer than the original OEM seals from CPS) Viton O-Rings (vs Chinese OEM seals that come with the standard unit) Upgraded unit Warranty covers butane users for 1 year from BVV! Standard units are not warrantied.    Key Features: • CPS TRS21 R-600 Recovery Pump, 2 Cylinder Oil-Less Compressor Specifications: • Recovery Rates: Vapor- 2.5lb/min, Liquid-12lb/min • Ignition Proof Construction ANSI/ISA 12:12.1 • Power : 115 VAC, 60 Hz, 10 Amps • Power: 850 watts • Filtration: Internal 100 mesh Screen integrated into Suction Port • Weight : 24 LBS MaintenancePlease note regular maintenance and replacement of seals is NOT covered under warranty as these are normal wear and tear items. Compressor Seals will require re-build after 200-240hrs of operation, depending on use. We stock the following compatible rebuild kits for your convenience: Upgraded TRS21 Rebuild Kits: TRS21 Upgraded Top Piston Assembly TRS21 Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction TRS21 Upgraded Compressor head SS ¼” SAE 45D IN and OUT fittings TRS21 Complete Connecting Rod Assembly Upgrade Kit TRS21 2 Piece Piston Tool CPS Rebuild Kits: TR21X1 Valve Rebuild Kit TR21X2 Complete Rebuild Kit TR21X3 Piston Rebuild Kit TR21X4 Head Rebuild Kit ***DISCLAIMER TO CUSTOMER: Running any solvent that is not authorized by CPS voids all warranty. Running any solvent mixed with any organic plant material will instantly void all warranty. Any Odor coming from the pump or organic plant residuals will also void all warranty.  

    $1,098.96 - $1,405.48

  • TR21X2 Complete Rebuild Kit

    TR21X2 Complete Rebuild Kit

    TR21X2 Complete Rebuild Kit. Please note: this item may be backordered at any time due to high volume ordering through CPS. Please excuse this inconvenience. TR21X2 CPS TR21 Oil-less Compressor Rebuild Kit. Includes TR21X4 Head, Pistons, Bearings, Eccentrics, Cylinders, O rings And Bolts. Oil-less Compressor Head Assembly Includes valves assembled ready to install.  This kit is compatible with the following CPS pump(s): TRS 21 Recovery Pump TRS 600 Recovery Pump

    $508.52

  • BVV™ Filter Dryer

    BVV™ Filter Dryer

    BVV Filter Dryer (Compare to Mastercool 69500-DR Filter Dryer) 1/4" In-Line Liquid filter drier model SDML-032 DM Core - 100% molecular sieves recommended for HFC's with POE and PAG oils.

    $21.19

  • TRS21 Valve Rebuild Kit TR21X1

    TRS21 Valve Rebuild Kit TR21X1

    Specifications: CPS TR21 Oilless Compressor Valve Rebuild Kit includes valves, valve springs, seals and o-rings and inlet screen. This kit is compatible with the following CPS pumps: TRS 21 Recovery Pump TRS 19 Recovery Pump TRS 600 Recovery Pump

    $98.88

  • TRS21 / BVV Upgraded Top Piston Assembly

    TRS21 / BVV Upgraded Top Piston Assembly

    BVV-3 Included in this kit: Top piston assembly with piston seal and piston wear band. This upgrade kit can be used for the following recovery pumps: CPS TRS21 Anti-spark/explosion pump BVV 2 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified BVV 4 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified - Requires 2 kits because this unit has 4 cylinders. BVV CMEP-OL Retro Fit Upgraded Head - Requires 2 kits because this unit has 4 cylinders. BVV 4 Cyl & 2 Cyl Pump Seal Rebuild Instructions If you have upgraded to the 2-piece SS piston design this kit is used to rebuild the piston seal and wear band. Piston tool (SKU: BVV-TL1) and Loctite 242 will be needed to properly install. If tool is not used the customer is responsible for any damage done to piston during assembly.     

    $155.38

  • 3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair

    3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair

    Includes a Pair of Custom 3/8" 37  degree JIC fittings that adapt on to any TRS21 pump. (Does not include Pump) ***Note: This Adapter SHOULD NOT BE OVERTIGHTENED. Hand Tight with 1/4 Wrench turn will complete the face seal of the O-ring. (PTFE Thread Tape is NOT Required for this connection) ***Note: Always use 2 Wrenches while tightening the hose to the flare to stop the gasket from being crushed.

    $39.55

  • Standard CPS Piston Connecting Rod Assembly for TRS21 / TR21 (TR21x3 Kit)

    Standard CPS Piston Connecting Rod Assembly for TRS21 / TR21 (TR21x3 Kit)

    CPS Standard Connecting Rod Assembly TR21X3 Piston Rebuild Kit TRS21 Oil-less Compressor Connecting Rod With Bearings (2)   CPS manufactured rebuild kit for TRS21 recovery pump piston heads. This kit is compatible with the following CPS pumps: TRS 21 Recovery Pump TRS 19 Recovery Pump TRS 600 Recovery Pump

    $196.34

  • TRS21 Active Closed Loop Recovery Kit

    TRS21 Active Closed Loop Recovery Kit

    This is an Upgrade Kit which can be added to any one of our passive systems making it into an "Active" Closed Loop System. The Active Recovery Upgrade Kit will increase recovery times by condensing the vapor a lot faster than just a hot/cold differential. This will increase efficiency and productivity, many professionals use this method, as this drives profits. This Kit Includes the Following: TRS21 Refrigerant Recovery Pump Best Value Vacs Large Condensing Coil 1/4" x 24" SS JIC Braided Hose (3) 1/4" x 48" SS JIC Braided Hose 1/4" x 60" SS JIC Braided Hose Molecular Sieve Filter Drier BVV 5' HVAC Hose BVV  Vacuum Tee The Upgraded version of the TRS21 comes pre-installed with higher quality internal components that increase recovery speed drastically and also comes with 3/8" JIC and SAE Flares to reduce restrictions in the pump and increase flow/recovery rates. DISCLAIMER: The Upgraded version will still come with standard 1/4" Hoses and Fittings. Upgraded Version Includes: Standard 1/4" Flares Upgraded Inlet/Outlet 3/8" JIC and SAE Flares 2 Piece SS Pistons GEN III Piston Seals Viton O-Rings Stainless Steel Fittings TRS21 Upgrade Kits: TRS21 Upgraded Top Piston Assembly TRS21 Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction TRS21 Upgraded Compressor head SS ¼” SAE 45D IN and OUT fittings TRS21 Complete Connecting Rod Assembly Upgrade Kit TRS21 2 Piece Piston Tool CPS Rebuild Kits:• TR21X1 Valve Rebuild Kit• TR21X2 Complete Rebuild Kit• TR21X3 Piston Rebuild Kit• TR21X4 Head Rebuild Kit ***Note: Running any solvent that is not authorized by CPS voids all warranty. Running any solvent mixed with any organic plant material will instantly void all warranty. Any Odor coming from the pump or organic plant residuals will also void all warranty.

    $2,471.95

  • TRS21 / BVV Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction

    TRS21 / BVV Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction

    BVV-1 Included in this kit: Complete connecting rod assemblies with 2-piece SS piston, piston seals, and viton o-rings. This upgrade kit can be used for the following recovery pumps: CPS TRS21 Anti-spark/explosion pump BVV 2 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified BVV 4 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified - Requires 2 kits because this unit has 4 cylinders. Looking to rebuild your TRS21 and want to upgrade to a more efficient and longer lasting piston/rod setup? This kit comes with a fully assembled connection rod and 2 piece piston. The piston is made out of SS making it a great choice for any application where bacterial growth must be eliminated. This design focuses on long life piston seal and wear band. This kit utilizes a Viton energized o-ring specifically designed for butane and or propane recovery used in the extraction process. By utilizing this kit the piston seal and wear band can be easily removed without having to disassemble the rod from crank. An inexpensive tool (*NOT INCLUDED* SKU: BVV-TL1) is required to rebuild the seals next time service is needed. The tool uses two posts to lock into the top of the piston and a 5/8” Hex heat to remove the top part of the piston. If you would like to purchase both the piston/rod assembly and tool it’s (SKU:BVV-K1). If the tool is not used the customer is responsible for all damage done to piston. After this has been done the wear ring can slide out and the piston seal can be replaced with a new one, the kit can be purchased for all future piston seal and wear band rebuilds (*NOT INCLUDED* SKU: BVV-3). Loctite 242 (*NOT INCLUDED) will also be required for proper installation.   A test was performed between the OEM piston and seal design and the BVV. Results show that the BVV had a much less leak rate than the OEM design. After hours of use the leak rate of the OEM design was unable to recover the complete initial solvent batch. This affects the efficiency of the recovery process.    

    $261.32

  • BVV Complete TRS21S Gen III Upgraded Rebuild Kit

    BVV Complete TRS21S Gen III Upgraded Rebuild Kit

    This upgraded rebuild kit contains everything you need to rebuild your TRS21 recovery pump and give a needed upgrade through improved seals, pistons, and O-rings. This upgrade kit can be used for the following recovery pump: CPS TRS21 Anti-spark/explosion pump This Kit includes the follow items: Upgraded Cylinder Replacement kit with Viton O-rings and Shims Upgraded Gen III 2 pc. SS Connecting Rod Assembly Upgraded 2 Cylinder .5" stroke Eccentric Assembly 2 pc 1/4" 45 Degree SAE stainless Steel Fittings

    $586.21

  • TR21X4 Compressor Head Complete Replacement

    TR21X4 Compressor Head Complete Replacement

    TR21X4 Compressor Head Complete Replacement  TR21X4 CPS TR21 Oil-less Compressor Head Assembly. Includes valves assembled ready to install. Does not include a high pressure switch. This kit is compatible with the following CPS pumps: TRS 21 Recovery Pump TRS 19 Recovery Pump

    $237.31

  • TRS21 Complete Connecting Rod Assembly Upgrade Kit

    TRS21 Complete Connecting Rod Assembly Upgrade Kit

    BVV-K1 Included in this kit: Complete connecting rod assemblies with 2-piece SS piston, piston seals, viton o-rings, and 2-piece piston tool. Looking to rebuild your TRS21 and want to upgrade to a more efficient and longer lasting piston/rod setup? This kit comes with a fully assembled connection rod and 2 piece piston. The piston is made out of SS making it a great choice for any application where bacterial growth must be eliminated. This design focuses on long life piston seal and wear band. This kit utilizes a Viton energized o-ring specifically designed for butane and or propane recovery used in the extraction process. By utilizing this kit the piston seal and wear band can be easily removed without having to disassemble the rod from crank. An inexpensive tool (*INCLUDED* SKU: BVV-TL1) is required to rebuild the seals next time service is needed. The tool uses two posts to lock into the top of the piston and a 5/8” Hex heat to remove the top part of the piston. After this has been done the wear ring can slide out and the piston seal can be replaced with a new one, the kit can be purchased for all future piston seal and wear band rebuilds (*NOT INCLUDED* SKU: BVV-3). Loctite 242 (*NOT INCLUDED*) will also be required for proper installation.   A test was performed between the OEM piston and seal design and the BVV. Results show that the BVV had a much less leak rate than the OEM design. After hours of use the leak rate of the OEM design was unable to recover the complete initial solvent batch. This affects the efficiency of the recovery process.  

    $275.45

  • TRS21 2 Piece Piston Tool

    TRS21 2 Piece Piston Tool

    BVV-TL1 Included: 2-piece piston tool. This tool is specially used to rebuild BVV-1. It features two posts that lock into the top of the piston and a 5/8” hex head for easy installation. This tool is required to install top piston assembly without damaging the piston. If this tool is not used the customer is responsible for all damage done to piston.  

    $18.36

  • TRS21 & BVV Butane Recovery Pump Valve Rebuild Kit

    TRS21 & BVV Butane Recovery Pump Valve Rebuild Kit

    This is the complete valve rebuild kit for the cylinder head on the BVV Recovery pumps or the TRS21.  This is only for 2 pistons.  So if you have the BVV 4 Cylinder pump you would need two kits.  These gaskets are upgraded and are compatible with butane and propane gasses, all the O-ring seals in this kit are Viton

    $127.13

  • TRS21 Upgraded Cylinder Replacement Kit, w/Shims Fits BVV4CYL & BVV2CYL

    TRS21 Upgraded Cylinder Replacement Kit, w/Shims Fits BVV4CYL & BVV2CYL

    BVV-6     Included in this kit: (2x) Anodized Aluminum Cylinders and Viton Gaskets, Plus 6 shims (2x .004" and 2x .002") use for top dead center adjustment of the cylinders to dial in the displacement (recommended displacement .008").  This upgrade kit can be used for the following recovery pumps: CPS TRS21 Anti-spark/explosion pump (including the SS model from BVV) BVV 2 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified BVV 4 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified - Requires 2 kits because this unit has 4 cylinders. BVV 4 Cyl & 2 Cyl Pump Seal Rebuild Instructions  

    $180.81

  • TRS21 Upgraded Compressor head SS ¼” SAE 45D IN and OUT fittings

    TRS21 Upgraded Compressor head SS ¼” SAE 45D IN and OUT fittings

    BVV-9-1 Included in this kit: TRS21 compressor head SS ¼” SAE 45D IN and OUT fittings, Viton o-rings. Use these fittings to replace the OEM brass fittings on your TRS21. The SS fittings minimize and help eliminate bacterial growth in the recovery process.    

    $39.55

  • Upgraded TRS21 Compressor Head Complete, Stainless Fittings, Viton

    Upgraded TRS21 Compressor Head Complete, Stainless Fittings, Viton

    Upgraded TRS21 Compressor Head Complete, Stainless Fittings, Viton   Upgrade your TRS21 by purchasing a new Compressor Head with Viton O-rings for butane and propane gas compatibly and stainless steel fittings to meet FDA guidelines on handling of consumable products.  This head is assembled here in the USA and is a direct replacement for any TRS21 Compressor Head. 

    $275.45

  • Upgrade Tool for TRS21 Suction Valve

    Upgrade Tool for TRS21 Suction Valve

    Our specialized tool for use with rebuilding the head on TRS21, makes installation of new Suction Valve O-Rings much easier. Includes (5) Viton O-rings.

    $25.43

  • Viton Piston Cylinder Top O-ring for TRS21 and BVV 2/4CYL

    Viton Piston Cylinder Top O-ring for TRS21 and BVV 2/4CYL

    Replacement Viton Piston Cylinder Top O-ring for TRS21 and BVV 2/4CYL sold as single O-ring

    $4.24

  • LOCTITE 24205 THREADLOCKER 242 MED STRENGTH

    LOCTITE 24205 THREADLOCKER 242 MED STRENGTH

    Prevents loosening and leakage of threaded fasteners. Particularly suitable for applications such as pump or motor mounting bolts, engine rocker nuts or equipment housing screws, where disassembly with hand tools is required for servicing. Anaerobic Acrylic Threadlock Sold as .5 ml pack

  • CPS TRS21 Compressor Head Complete Stainless Rebuild Kit

    CPS TRS21 Compressor Head Complete Stainless Rebuild Kit

    CPS TRS21 Compressor Head Rebuild Stainless Kit Upgrade the compressor head on the TRS21 to be compatible with CBD oils by replacing all the existing O-ring seals with Viton.  Replace all brass fittings with Stainless Steel to by inline with FDA on consumable products.  Replace springs and valves. Compressor Head Rebuild Instructions

    $139.84

  • Viton Replacement O-ring for TRS21 and BVV 2/4CYL Suction Valves

    Viton Replacement O-ring for TRS21 and BVV 2/4CYL Suction Valves

    Viton Replacement O-rings for TRS21 and BVV 2/4CYL Suction Valves sold as single O-ring.

  • TRS21 Valve Head Complete Viton O-ring Kit

    TRS21 Valve Head Complete Viton O-ring Kit

    Replacement kit with Viton O-rings for the TRS21 head. Compatible for use with the Oil Extraction Market, Butane and Propane Extraction solvents. 

    $45.20

  • CPS TRS21 Top Dead Center Piston Depth Calibration Plate

    CPS TRS21 Top Dead Center Piston Depth Calibration Plate

    CPS TRS21 Top Dead Center Calibration Plate & Bolts Use with the Top Dead Center Clearance (TDCC) instructions Use this plate and a depth gauge to measure the Top Dead Center Clearance of the piston/cylinder/head assembly.  Shims that come with the piston cylinders are stacked to create an area of displacement between the top of the cylinder and the compressor head. BVV's Recommended depth is between 0.008" and 0.012" for the CPS TRS21 for optimum performance.  Top Dead Center Clearance Instructions *Depth Gauge Not included, its only used for reference in the photo. Any type of simple digital depth gauge will work to check the piston displacement. 

    $42.38

Login

Forgot your password?

Don't have an account yet?
Create account